linux/drivers/usb/dwc3/ep0.c

805 lines
19 KiB
C
Raw Normal View History

/**
* ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
*
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
* All rights reserved.
*
* Authors: Felipe Balbi <balbi@ti.com>,
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the above-listed copyright holders may not be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2, as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/dma-mapping.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include "core.h"
#include "gadget.h"
#include "io.h"
static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
const struct dwc3_event_depevt *event);
static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
{
switch (state) {
case EP0_UNCONNECTED:
return "Unconnected";
case EP0_SETUP_PHASE:
return "Setup Phase";
case EP0_DATA_PHASE:
return "Data Phase";
case EP0_STATUS_PHASE:
return "Status Phase";
default:
return "UNKNOWN";
}
}
static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
u32 len, u32 type)
{
struct dwc3_gadget_ep_cmd_params params;
struct dwc3_trb_hw *trb_hw;
struct dwc3_trb trb;
struct dwc3_ep *dep;
int ret;
dep = dwc->eps[epnum];
if (dep->flags & DWC3_EP_BUSY) {
dev_vdbg(dwc->dev, "%s: still busy\n", dep->name);
return 0;
}
trb_hw = dwc->ep0_trb;
memset(&trb, 0, sizeof(trb));
trb.trbctl = type;
trb.bplh = buf_dma;
trb.length = len;
trb.hwo = 1;
trb.lst = 1;
trb.ioc = 1;
trb.isp_imi = 1;
dwc3_trb_to_hw(&trb, trb_hw);
memset(&params, 0, sizeof(params));
params.param0.depstrtxfer.transfer_desc_addr_high =
upper_32_bits(dwc->ep0_trb_addr);
params.param1.depstrtxfer.transfer_desc_addr_low =
lower_32_bits(dwc->ep0_trb_addr);
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
DWC3_DEPCMD_STARTTRANSFER, &params);
if (ret < 0) {
dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
return ret;
}
dep->flags |= DWC3_EP_BUSY;
dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
dep->number);
dwc->ep0_next_event = DWC3_EP0_COMPLETE;
return 0;
}
static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
struct dwc3_request *req)
{
int ret = 0;
req->request.actual = 0;
req->request.status = -EINPROGRESS;
req->epnum = dep->number;
list_add_tail(&req->list, &dep->request_list);
/*
* Gadget driver might not be quick enough to queue a request
* before we get a Transfer Not Ready event on this endpoint.
*
* In that case, we will set DWC3_EP_PENDING_REQUEST. When that
* flag is set, it's telling us that as soon as Gadget queues the
* required request, we should kick the transfer here because the
* IRQ we were waiting for is long gone.
*/
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
struct dwc3 *dwc = dep->dwc;
unsigned direction;
u32 type;
direction = !!(dep->flags & DWC3_EP0_DIR_IN);
if (dwc->ep0state == EP0_STATUS_PHASE) {
type = dwc->three_stage_setup
? DWC3_TRBCTL_CONTROL_STATUS3
: DWC3_TRBCTL_CONTROL_STATUS2;
} else if (dwc->ep0state == EP0_DATA_PHASE) {
type = DWC3_TRBCTL_CONTROL_DATA;
} else {
/* should never happen */
WARN_ON(1);
return 0;
}
ret = dwc3_ep0_start_trans(dwc, direction,
req->request.dma, req->request.length, type);
dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
DWC3_EP0_DIR_IN);
}
return ret;
}
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags)
{
struct dwc3_request *req = to_dwc3_request(request);
struct dwc3_ep *dep = to_dwc3_ep(ep);
struct dwc3 *dwc = dep->dwc;
unsigned long flags;
int ret;
spin_lock_irqsave(&dwc->lock, flags);
if (!dep->desc) {
dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
request, dep->name);
ret = -ESHUTDOWN;
goto out;
}
/* we share one TRB for ep0/1 */
if (!list_empty(&dwc->eps[0]->request_list) ||
!list_empty(&dwc->eps[1]->request_list) ||
dwc->ep0_status_pending) {
ret = -EBUSY;
goto out;
}
dev_vdbg(dwc->dev, "queueing request %p to %s length %d, state '%s'\n",
request, dep->name, request->length,
dwc3_ep0_state_string(dwc->ep0state));
ret = __dwc3_gadget_ep0_queue(dep, req);
out:
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
}
static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
{
struct dwc3_ep *dep = dwc->eps[0];
/* stall is always issued on EP0 */
__dwc3_gadget_ep_set_halt(dwc->eps[0], 1);
dwc->eps[0]->flags = DWC3_EP_ENABLED;
if (!list_empty(&dep->request_list)) {
struct dwc3_request *req;
req = next_request(&dep->request_list);
dwc3_gadget_giveback(dep, req, -ECONNRESET);
}
dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
}
void dwc3_ep0_out_start(struct dwc3 *dwc)
{
int ret;
ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
DWC3_TRBCTL_CONTROL_SETUP);
WARN_ON(ret < 0);
}
static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
{
struct dwc3_ep *dep;
u32 windex = le16_to_cpu(wIndex_le);
u32 epnum;
epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
epnum |= 1;
dep = dwc->eps[epnum];
if (dep->flags & DWC3_EP_ENABLED)
return dep;
return NULL;
}
static void dwc3_ep0_send_status_response(struct dwc3 *dwc)
{
dwc3_ep0_start_trans(dwc, 1, dwc->setup_buf_addr,
dwc->ep0_usb_req.length,
DWC3_TRBCTL_CONTROL_DATA);
}
/*
* ch 9.4.5
*/
static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
struct dwc3_ep *dep;
u32 recip;
u16 usb_status = 0;
__le16 *response_pkt;
recip = ctrl->bRequestType & USB_RECIP_MASK;
switch (recip) {
case USB_RECIP_DEVICE:
/*
* We are self-powered. U1/U2/LTM will be set later
* once we handle this states. RemoteWakeup is 0 on SS
*/
usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED;
break;
case USB_RECIP_INTERFACE:
/*
* Function Remote Wake Capable D0
* Function Remote Wakeup D1
*/
break;
case USB_RECIP_ENDPOINT:
dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
if (!dep)
return -EINVAL;
if (dep->flags & DWC3_EP_STALL)
usb_status = 1 << USB_ENDPOINT_HALT;
break;
default:
return -EINVAL;
};
response_pkt = (__le16 *) dwc->setup_buf;
*response_pkt = cpu_to_le16(usb_status);
dwc->ep0_usb_req.length = sizeof(*response_pkt);
dwc->ep0_status_pending = 1;
return 0;
}
static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
struct usb_ctrlrequest *ctrl, int set)
{
struct dwc3_ep *dep;
u32 recip;
u32 wValue;
u32 wIndex;
u32 reg;
int ret;
u32 mode;
wValue = le16_to_cpu(ctrl->wValue);
wIndex = le16_to_cpu(ctrl->wIndex);
recip = ctrl->bRequestType & USB_RECIP_MASK;
switch (recip) {
case USB_RECIP_DEVICE:
/*
* 9.4.1 says only only for SS, in AddressState only for
* default control pipe
*/
switch (wValue) {
case USB_DEVICE_U1_ENABLE:
case USB_DEVICE_U2_ENABLE:
case USB_DEVICE_LTM_ENABLE:
if (dwc->dev_state != DWC3_CONFIGURED_STATE)
return -EINVAL;
if (dwc->speed != DWC3_DSTS_SUPERSPEED)
return -EINVAL;
}
/* XXX add U[12] & LTM */
switch (wValue) {
case USB_DEVICE_REMOTE_WAKEUP:
break;
case USB_DEVICE_U1_ENABLE:
break;
case USB_DEVICE_U2_ENABLE:
break;
case USB_DEVICE_LTM_ENABLE:
break;
case USB_DEVICE_TEST_MODE:
if ((wIndex & 0xff) != 0)
return -EINVAL;
if (!set)
return -EINVAL;
mode = wIndex >> 8;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg &= ~DWC3_DCTL_TSTCTRL_MASK;
switch (mode) {
case TEST_J:
case TEST_K:
case TEST_SE0_NAK:
case TEST_PACKET:
case TEST_FORCE_EN:
reg |= mode << 1;
break;
default:
return -EINVAL;
}
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
break;
default:
return -EINVAL;
}
break;
case USB_RECIP_INTERFACE:
switch (wValue) {
case USB_INTRF_FUNC_SUSPEND:
if (wIndex & USB_INTRF_FUNC_SUSPEND_LP)
/* XXX enable Low power suspend */
;
if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
/* XXX enable remote wakeup */
;
break;
default:
return -EINVAL;
}
break;
case USB_RECIP_ENDPOINT:
switch (wValue) {
case USB_ENDPOINT_HALT:
dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
if (!dep)
return -EINVAL;
ret = __dwc3_gadget_ep_set_halt(dep, set);
if (ret)
return -EINVAL;
break;
default:
return -EINVAL;
}
break;
default:
return -EINVAL;
};
return 0;
}
static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
int ret = 0;
u32 addr;
u32 reg;
addr = le16_to_cpu(ctrl->wValue);
if (addr > 127)
return -EINVAL;
switch (dwc->dev_state) {
case DWC3_DEFAULT_STATE:
case DWC3_ADDRESS_STATE:
/*
* Not sure if we should program DevAddr now or later
*/
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
reg &= ~(DWC3_DCFG_DEVADDR_MASK);
reg |= DWC3_DCFG_DEVADDR(addr);
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
if (addr)
dwc->dev_state = DWC3_ADDRESS_STATE;
else
dwc->dev_state = DWC3_DEFAULT_STATE;
break;
case DWC3_CONFIGURED_STATE:
ret = -EINVAL;
break;
}
return ret;
}
static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
int ret;
spin_unlock(&dwc->lock);
ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
spin_lock(&dwc->lock);
return ret;
}
static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
u32 cfg;
int ret;
cfg = le16_to_cpu(ctrl->wValue);
switch (dwc->dev_state) {
case DWC3_DEFAULT_STATE:
return -EINVAL;
break;
case DWC3_ADDRESS_STATE:
ret = dwc3_ep0_delegate_req(dwc, ctrl);
/* if the cfg matches and the cfg is non zero */
if (!ret && cfg)
dwc->dev_state = DWC3_CONFIGURED_STATE;
break;
case DWC3_CONFIGURED_STATE:
ret = dwc3_ep0_delegate_req(dwc, ctrl);
if (!cfg)
dwc->dev_state = DWC3_ADDRESS_STATE;
break;
}
return 0;
}
static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
int ret;
switch (ctrl->bRequest) {
case USB_REQ_GET_STATUS:
dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS\n");
ret = dwc3_ep0_handle_status(dwc, ctrl);
break;
case USB_REQ_CLEAR_FEATURE:
dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE\n");
ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
break;
case USB_REQ_SET_FEATURE:
dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE\n");
ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
break;
case USB_REQ_SET_ADDRESS:
dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS\n");
ret = dwc3_ep0_set_address(dwc, ctrl);
break;
case USB_REQ_SET_CONFIGURATION:
dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n");
ret = dwc3_ep0_set_config(dwc, ctrl);
break;
default:
dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
ret = dwc3_ep0_delegate_req(dwc, ctrl);
break;
};
return ret;
}
static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
int ret;
u32 len;
if (!dwc->gadget_driver)
goto err;
len = le16_to_cpu(ctrl->wLength);
if (!len) {
dwc->three_stage_setup = 0;
dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
} else {
dwc->three_stage_setup = 1;
dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
}
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
ret = dwc3_ep0_std_request(dwc, ctrl);
else
ret = dwc3_ep0_delegate_req(dwc, ctrl);
if (ret >= 0)
return;
err:
dwc3_ep0_stall_and_restart(dwc);
}
static void dwc3_ep0_complete_data(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
struct dwc3_request *r = NULL;
struct usb_request *ur;
struct dwc3_trb trb;
struct dwc3_ep *dep;
u32 transferred;
u8 epnum;
epnum = event->endpoint_number;
dep = dwc->eps[epnum];
dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
if (!dwc->ep0_status_pending) {
r = next_request(&dwc->eps[0]->request_list);
ur = &r->request;
} else {
ur = &dwc->ep0_usb_req;
dwc->ep0_status_pending = 0;
}
dwc3_trb_to_nat(dwc->ep0_trb, &trb);
if (dwc->ep0_bounced) {
struct dwc3_ep *ep0 = dwc->eps[0];
transferred = min_t(u32, ur->length,
ep0->endpoint.maxpacket - trb.length);
memcpy(ur->buf, dwc->ep0_bounce, transferred);
dwc->ep0_bounced = false;
} else {
transferred = ur->length - trb.length;
ur->actual += transferred;
}
if ((epnum & 1) && ur->actual < ur->length) {
/* for some reason we did not get everything out */
dwc3_ep0_stall_and_restart(dwc);
dwc3_gadget_giveback(dep, r, -ECONNRESET);
} else {
/*
* handle the case where we have to send a zero packet. This
* seems to be case when req.length > maxpacket. Could it be?
*/
if (r)
dwc3_gadget_giveback(dep, r, 0);
}
}
static void dwc3_ep0_complete_req(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
struct dwc3_request *r;
struct dwc3_ep *dep;
dep = dwc->eps[0];
if (!list_empty(&dep->request_list)) {
r = next_request(&dep->request_list);
dwc3_gadget_giveback(dep, r, 0);
}
dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
}
static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
dep->flags &= ~DWC3_EP_BUSY;
switch (dwc->ep0state) {
case EP0_SETUP_PHASE:
dev_vdbg(dwc->dev, "Inspecting Setup Bytes\n");
dwc3_ep0_inspect_setup(dwc, event);
break;
case EP0_DATA_PHASE:
dev_vdbg(dwc->dev, "Data Phase\n");
dwc3_ep0_complete_data(dwc, event);
break;
case EP0_STATUS_PHASE:
dev_vdbg(dwc->dev, "Status Phase\n");
dwc3_ep0_complete_req(dwc, event);
break;
default:
WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
}
}
static void dwc3_ep0_do_control_setup(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
}
static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
struct dwc3_ep *dep;
struct dwc3_request *req;
int ret;
dep = dwc->eps[0];
dwc->ep0state = EP0_DATA_PHASE;
if (dwc->ep0_status_pending) {
dwc3_ep0_send_status_response(dwc);
return;
}
if (list_empty(&dep->request_list)) {
dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
dep->flags |= DWC3_EP_PENDING_REQUEST;
if (event->endpoint_number)
dep->flags |= DWC3_EP0_DIR_IN;
return;
}
req = next_request(&dep->request_list);
req->direction = !!event->endpoint_number;
dwc->ep0state = EP0_DATA_PHASE;
if (req->request.length == 0) {
ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
dwc->ctrl_req_addr, 0,
DWC3_TRBCTL_CONTROL_DATA);
} else if ((req->request.length % dep->endpoint.maxpacket)
&& (event->endpoint_number == 0)) {
dwc3_map_buffer_to_dma(req);
WARN_ON(req->request.length > dep->endpoint.maxpacket);
dwc->ep0_bounced = true;
/*
* REVISIT in case request length is bigger than EP0
* wMaxPacketSize, we will need two chained TRBs to handle
* the transfer.
*/
ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
dwc->ep0_bounce_addr, dep->endpoint.maxpacket,
DWC3_TRBCTL_CONTROL_DATA);
} else {
dwc3_map_buffer_to_dma(req);
ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
req->request.dma, req->request.length,
DWC3_TRBCTL_CONTROL_DATA);
}
WARN_ON(ret < 0);
}
static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
u32 type;
int ret;
dwc->ep0state = EP0_STATUS_PHASE;
type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
: DWC3_TRBCTL_CONTROL_STATUS2;
ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
dwc->ctrl_req_addr, 0, type);
WARN_ON(ret < 0);
}
static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
switch (event->status) {
case DEPEVT_STATUS_CONTROL_SETUP:
dev_vdbg(dwc->dev, "Control Setup\n");
dwc3_ep0_do_control_setup(dwc, event);
break;
case DEPEVT_STATUS_CONTROL_DATA:
dev_vdbg(dwc->dev, "Control Data\n");
if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) {
dev_vdbg(dwc->dev, "Expected %d got %d\n",
DEPEVT_STATUS_CONTROL_DATA,
event->status);
dwc3_ep0_stall_and_restart(dwc);
return;
}
dwc3_ep0_do_control_data(dwc, event);
break;
case DEPEVT_STATUS_CONTROL_STATUS:
dev_vdbg(dwc->dev, "Control Status\n");
if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) {
dev_vdbg(dwc->dev, "Expected %d got %d\n",
DEPEVT_STATUS_CONTROL_STATUS,
event->status);
dwc3_ep0_stall_and_restart(dwc);
return;
}
dwc3_ep0_do_control_status(dwc, event);
}
}
void dwc3_ep0_interrupt(struct dwc3 *dwc,
const const struct dwc3_event_depevt *event)
{
u8 epnum = event->endpoint_number;
dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'\n",
dwc3_ep_event_string(event->endpoint_event),
epnum, (epnum & 1) ? "in" : "out",
dwc3_ep0_state_string(dwc->ep0state));
switch (event->endpoint_event) {
case DWC3_DEPEVT_XFERCOMPLETE:
dwc3_ep0_xfer_complete(dwc, event);
break;
case DWC3_DEPEVT_XFERNOTREADY:
dwc3_ep0_xfernotready(dwc, event);
break;
case DWC3_DEPEVT_XFERINPROGRESS:
case DWC3_DEPEVT_RXTXFIFOEVT:
case DWC3_DEPEVT_STREAMEVT:
case DWC3_DEPEVT_EPCMDCMPLT:
break;
}
}