linux/net/mac80211/wme.c

280 lines
6.2 KiB
C
Raw Normal View History

/*
* Copyright 2004, Instant802 Networks, Inc.
* Copyright 2013-2014 Intel Mobile Communications GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/module.h>
#include <linux/if_arp.h>
#include <linux/types.h>
#include <net/ip.h>
#include <net/pkt_sched.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "wme.h"
/* Default mapping in classifier to work with default
* queue setup.
*/
const int ieee802_1d_to_ac[8] = {
IEEE80211_AC_BE,
IEEE80211_AC_BK,
IEEE80211_AC_BK,
IEEE80211_AC_BE,
IEEE80211_AC_VI,
IEEE80211_AC_VI,
IEEE80211_AC_VO,
IEEE80211_AC_VO
};
static int wme_downgrade_ac(struct sk_buff *skb)
{
switch (skb->priority) {
case 6:
case 7:
skb->priority = 5; /* VO -> VI */
return 0;
case 4:
case 5:
skb->priority = 3; /* VI -> BE */
return 0;
case 0:
case 3:
skb->priority = 2; /* BE -> BK */
return 0;
default:
return -1;
}
}
/**
* ieee80211_fix_reserved_tid - return the TID to use if this one is reserved
* @tid: the assumed-reserved TID
*
* Returns: the alternative TID to use, or 0 on error
*/
static inline u8 ieee80211_fix_reserved_tid(u8 tid)
{
switch (tid) {
case 0:
return 3;
case 1:
return 2;
case 2:
return 1;
case 3:
return 0;
case 4:
return 5;
case 5:
return 4;
case 6:
return 7;
case 7:
return 6;
}
return 0;
}
static u16 ieee80211_downgrade_queue(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, struct sk_buff *skb)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
/* in case we are a client verify acm is not set for this ac */
while (sdata->wmm_acm & BIT(skb->priority)) {
int ac = ieee802_1d_to_ac[skb->priority];
if (ifmgd->tx_tspec[ac].admitted_time &&
skb->priority == ifmgd->tx_tspec[ac].up)
return ac;
if (wme_downgrade_ac(skb)) {
/*
* This should not really happen. The AP has marked all
* lower ACs to require admission control which is not
* a reasonable configuration. Allow the frame to be
* transmitted using AC_BK as a workaround.
*/
break;
}
}
/* Check to see if this is a reserved TID */
if (sta && sta->reserved_tid == skb->priority)
skb->priority = ieee80211_fix_reserved_tid(skb->priority);
/* look up which queue to use for frames with this 1d tag */
return ieee802_1d_to_ac[skb->priority];
}
/* Indicate which queue to use for this fully formed 802.11 frame */
u16 ieee80211_select_queue_80211(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb,
struct ieee80211_hdr *hdr)
{
struct ieee80211_local *local = sdata->local;
u8 *p;
if (local->hw.queues < IEEE80211_NUM_ACS)
return 0;
if (!ieee80211_is_data(hdr->frame_control)) {
skb->priority = 7;
return ieee802_1d_to_ac[skb->priority];
}
if (!ieee80211_is_data_qos(hdr->frame_control)) {
skb->priority = 0;
return ieee802_1d_to_ac[skb->priority];
}
p = ieee80211_get_qos_ctl(hdr);
skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
return ieee80211_downgrade_queue(sdata, NULL, skb);
}
/* Indicate which queue to use. */
u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta = NULL;
const u8 *ra = NULL;
bool qos = false;
struct mac80211_qos_map *qos_map;
u16 ret;
if (local->hw.queues < IEEE80211_NUM_ACS || skb->len < 6) {
skb->priority = 0; /* required for correct WPA/11i MIC */
return 0;
}
rcu_read_lock();
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP_VLAN:
sta = rcu_dereference(sdata->u.vlan.sta);
if (sta) {
qos = sta->sta.wme;
break;
}
case NL80211_IFTYPE_AP:
ra = skb->data;
break;
case NL80211_IFTYPE_WDS:
ra = sdata->u.wds.remote_addr;
break;
#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT:
qos = true;
break;
#endif
case NL80211_IFTYPE_STATION:
/* might be a TDLS station */
sta = sta_info_get(sdata, skb->data);
if (sta)
qos = sta->sta.wme;
ra = sdata->u.mgd.bssid;
break;
case NL80211_IFTYPE_ADHOC:
ra = skb->data;
break;
case NL80211_IFTYPE_OCB:
/* all stations are required to support WME */
qos = true;
break;
default:
break;
}
if (!sta && ra && !is_multicast_ether_addr(ra)) {
sta = sta_info_get(sdata, ra);
if (sta)
qos = sta->sta.wme;
}
if (!qos) {
skb->priority = 0; /* required for correct WPA/11i MIC */
ret = IEEE80211_AC_BE;
goto out;
}
if (skb->protocol == sdata->control_port_protocol) {
skb->priority = 7;
goto downgrade;
}
/* use the data classifier to determine what 802.1d tag the
* data frame has */
qos_map = rcu_dereference(sdata->qos_map);
skb->priority = cfg80211_classify8021d(skb, qos_map ?
&qos_map->qos_map : NULL);
downgrade:
ret = ieee80211_downgrade_queue(sdata, sta, skb);
out:
rcu_read_unlock();
return ret;
}
/**
* ieee80211_set_qos_hdr - Fill in the QoS header if there is one.
*
* @sdata: local subif
* @skb: packet to be updated
*/
void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (void *)skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
u8 flags;
u8 *p;
if (!ieee80211_is_data_qos(hdr->frame_control))
return;
p = ieee80211_get_qos_ctl(hdr);
/* set up the first byte */
/*
* preserve everything but the TID and ACK policy
* (which we both write here)
*/
flags = *p & ~(IEEE80211_QOS_CTL_TID_MASK |
IEEE80211_QOS_CTL_ACK_POLICY_MASK);
if (is_multicast_ether_addr(hdr->addr1) ||
sdata->noack_map & BIT(tid)) {
flags |= IEEE80211_QOS_CTL_ACK_POLICY_NOACK;
info->flags |= IEEE80211_TX_CTL_NO_ACK;
}
*p = flags | tid;
/* set up the second byte */
p++;
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-30 18:14:08 +01:00
if (ieee80211_vif_is_mesh(&sdata->vif)) {
/* preserve RSPI and Mesh PS Level bit */
*p &= ((IEEE80211_QOS_CTL_RSPI |
IEEE80211_QOS_CTL_MESH_PS_LEVEL) >> 8);
/* Nulls don't have a mesh header (frame body) */
if (!ieee80211_is_qos_nullfunc(hdr->frame_control))
*p |= (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8);
} else {
*p = 0;
}
}