linux/tools/perf/builtin-probe.c

408 lines
11 KiB
C
Raw Normal View History

perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
/*
* builtin-probe.c
*
* Builtin probe command: Set up probe events by C expression
*
* Written by Masami Hiramatsu <mhiramat@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#define _GNU_SOURCE
#include <sys/utsname.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#undef _GNU_SOURCE
#include "perf.h"
#include "builtin.h"
#include "util/util.h"
#include "util/strlist.h"
#include "util/strfilter.h"
#include "util/symbol.h"
#include "util/debug.h"
#include "util/debugfs.h"
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
#include "util/parse-options.h"
#include "util/probe-finder.h"
#include "util/probe-event.h"
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
#define DEFAULT_VAR_FILTER "!__k???tab_* & !__crc_*"
#define DEFAULT_FUNC_FILTER "!_*"
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
#define MAX_PATH_LEN 256
/* Session management structure */
static struct {
bool list_events;
bool force_add;
perf probe: Support --line option to show probable source-code lines Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 15:45:34 +01:00
bool show_lines;
bool show_vars;
bool show_ext_vars;
bool show_funcs;
bool mod_events;
int nevents;
struct perf_probe_event events[MAX_PROBES];
struct strlist *dellist;
perf probe: Support --line option to show probable source-code lines Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 15:45:34 +01:00
struct line_range line_range;
2010-10-21 12:13:41 +02:00
const char *target_module;
int max_probe_points;
struct strfilter *filter;
} params;
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
/* Parse an event definition. Note that any error must die. */
static int parse_probe_event(const char *str)
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
{
struct perf_probe_event *pev = &params.events[params.nevents];
int ret;
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
pr_debug("probe-definition(%d): %s\n", params.nevents, str);
if (++params.nevents == MAX_PROBES) {
pr_err("Too many probes (> %d) were specified.", MAX_PROBES);
return -1;
}
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
/* Parse a perf-probe command into event */
ret = parse_perf_probe_command(str, pev);
pr_debug("%d arguments\n", pev->nargs);
return ret;
}
static int parse_probe_event_argv(int argc, const char **argv)
{
int i, len, ret;
char *buf;
/* Bind up rest arguments */
len = 0;
for (i = 0; i < argc; i++)
len += strlen(argv[i]) + 1;
buf = zalloc(len + 1);
if (buf == NULL)
return -ENOMEM;
len = 0;
for (i = 0; i < argc; i++)
len += sprintf(&buf[len], "%s ", argv[i]);
params.mod_events = true;
ret = parse_probe_event(buf);
free(buf);
return ret;
}
static int opt_add_probe_event(const struct option *opt __used,
const char *str, int unset __used)
{
if (str) {
params.mod_events = true;
return parse_probe_event(str);
} else
return 0;
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
}
static int opt_del_probe_event(const struct option *opt __used,
const char *str, int unset __used)
{
if (str) {
params.mod_events = true;
if (!params.dellist)
params.dellist = strlist__new(true, NULL);
strlist__add(params.dellist, str);
}
return 0;
}
#ifdef DWARF_SUPPORT
static int opt_show_lines(const struct option *opt __used,
const char *str, int unset __used)
{
int ret = 0;
if (!str)
return 0;
if (params.show_lines) {
pr_warning("Warning: more than one --line options are"
" detected. Only the first one is valid.\n");
return 0;
}
params.show_lines = true;
ret = parse_line_range_desc(str, &params.line_range);
INIT_LIST_HEAD(&params.line_range.line_list);
return ret;
}
static int opt_show_vars(const struct option *opt __used,
const char *str, int unset __used)
{
struct perf_probe_event *pev = &params.events[params.nevents];
int ret;
if (!str)
return 0;
ret = parse_probe_event(str);
if (!ret && pev->nargs != 0) {
pr_err(" Error: '--vars' doesn't accept arguments.\n");
return -EINVAL;
}
params.show_vars = true;
return ret;
}
#endif
static int opt_set_filter(const struct option *opt __used,
const char *str, int unset __used)
{
const char *err;
if (str) {
pr_debug2("Set filter: %s\n", str);
if (params.filter)
strfilter__delete(params.filter);
params.filter = strfilter__new(str, &err);
if (!params.filter) {
pr_err("Filter parse error at %td.\n", err - str + 1);
pr_err("Source: \"%s\"\n", str);
pr_err(" %*c\n", (int)(err - str + 1), '^');
return -EINVAL;
}
}
return 0;
}
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
static const char * const probe_usage[] = {
"perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]",
"perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]",
"perf probe [<options>] --del '[GROUP:]EVENT' ...",
"perf probe --list",
#ifdef DWARF_SUPPORT
2010-10-21 12:13:41 +02:00
"perf probe [<options>] --line 'LINEDESC'",
"perf probe [<options>] --vars 'PROBEPOINT'",
#endif
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
NULL
};
static const struct option options[] = {
perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-13 10:37:33 +02:00
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show parsed arguments, etc)"),
OPT_BOOLEAN('l', "list", &params.list_events,
"list up current probe events"),
OPT_CALLBACK('d', "del", NULL, "[GROUP:]EVENT", "delete a probe event.",
opt_del_probe_event),
OPT_CALLBACK('a', "add", NULL,
#ifdef DWARF_SUPPORT
"[EVENT=]FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT"
" [[NAME=]ARG ...]",
#else
"[EVENT=]FUNC[+OFF|%return] [[NAME=]ARG ...]",
#endif
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
"probe point definition, where\n"
"\t\tGROUP:\tGroup name (optional)\n"
"\t\tEVENT:\tEvent name\n"
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
"\t\tFUNC:\tFunction name\n"
perf probe: Add lazy line matching support Add lazy line matching support for specifying new probes. This also changes the syntax of perf probe a bit. Now perf probe accepts one of below probe event definitions. 1) Define event based on function name [EVENT=]FUNC[@SRC][:RLN|+OFF|%return|;PTN] [ARG ...] 2) Define event based on source file with line number [EVENT=]SRC:ALN [ARG ...] 3) Define event based on source file with lazy pattern [EVENT=]SRC;PTN [ARG ...] - New lazy matching pattern(PTN) follows ';' (semicolon). And it must be put the end of the definition. - So, @SRC is no longer the part which must be put at the end of the definition. Note that ';' (semicolon) can be interpreted as the end of a command by the shell. This means that you need to quote it. (anyway you will need to quote the lazy pattern itself too, because it may contains other sensitive characters, like '[',']' etc.). Lazy matching ------------- The lazy line matching is similar to glob matching except ignoring spaces in both of pattern and target. e.g. 'a=*' can matches 'a=b', 'a = b', 'a == b' and so on. This provides some sort of flexibility and robustness to probe point definitions against minor code changes. (for example, actual 10th line of schedule() can be changed easily by modifying schedule(), but the same line matching 'rq=cpu_rq*' may still exist.) Changes in v3: - Cast Dwarf_Addr to uintmax_t for printf-formats. Changes in v2: - Cast Dwarf_Addr to unsigned long long for printf-formats. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133611.6725.45078.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 14:36:12 +01:00
"\t\tOFF:\tOffset from function entry (in byte)\n"
"\t\t%return:\tPut the probe at function return\n"
#ifdef DWARF_SUPPORT
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
"\t\tSRC:\tSource code path\n"
perf probe: Add lazy line matching support Add lazy line matching support for specifying new probes. This also changes the syntax of perf probe a bit. Now perf probe accepts one of below probe event definitions. 1) Define event based on function name [EVENT=]FUNC[@SRC][:RLN|+OFF|%return|;PTN] [ARG ...] 2) Define event based on source file with line number [EVENT=]SRC:ALN [ARG ...] 3) Define event based on source file with lazy pattern [EVENT=]SRC;PTN [ARG ...] - New lazy matching pattern(PTN) follows ';' (semicolon). And it must be put the end of the definition. - So, @SRC is no longer the part which must be put at the end of the definition. Note that ';' (semicolon) can be interpreted as the end of a command by the shell. This means that you need to quote it. (anyway you will need to quote the lazy pattern itself too, because it may contains other sensitive characters, like '[',']' etc.). Lazy matching ------------- The lazy line matching is similar to glob matching except ignoring spaces in both of pattern and target. e.g. 'a=*' can matches 'a=b', 'a = b', 'a == b' and so on. This provides some sort of flexibility and robustness to probe point definitions against minor code changes. (for example, actual 10th line of schedule() can be changed easily by modifying schedule(), but the same line matching 'rq=cpu_rq*' may still exist.) Changes in v3: - Cast Dwarf_Addr to uintmax_t for printf-formats. Changes in v2: - Cast Dwarf_Addr to unsigned long long for printf-formats. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133611.6725.45078.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 14:36:12 +01:00
"\t\tRL:\tRelative line number from function entry.\n"
"\t\tAL:\tAbsolute line number in file.\n"
"\t\tPT:\tLazy expression of line code.\n"
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
"\t\tARG:\tProbe argument (local variable name or\n"
"\t\t\tkprobe-tracer argument format.)\n",
#else
"\t\tARG:\tProbe argument (kprobe-tracer argument format.)\n",
#endif
opt_add_probe_event),
OPT_BOOLEAN('f', "force", &params.force_add, "forcibly add events"
" with existing name"),
#ifdef DWARF_SUPPORT
perf probe: Support --line option to show probable source-code lines Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 15:45:34 +01:00
OPT_CALLBACK('L', "line", NULL,
"FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]",
perf probe: Support --line option to show probable source-code lines Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 15:45:34 +01:00
"Show source code lines.", opt_show_lines),
OPT_CALLBACK('V', "vars", NULL,
"FUNC[@SRC][+OFF|%return|:RL|;PT]|SRC:AL|SRC;PT",
"Show accessible variables on PROBEDEF", opt_show_vars),
OPT_BOOLEAN('\0', "externs", &params.show_ext_vars,
"Show external variables too (with --vars only)"),
OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
"file", "vmlinux pathname"),
OPT_STRING('s', "source", &symbol_conf.source_prefix,
"directory", "path to kernel source"),
2010-10-21 12:13:41 +02:00
OPT_STRING('m', "module", &params.target_module,
"modname|path",
"target module name (for online) or path (for offline)"),
perf probe: Support --line option to show probable source-code lines Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 15:45:34 +01:00
#endif
OPT__DRY_RUN(&probe_event_dry_run),
OPT_INTEGER('\0', "max-probes", &params.max_probe_points,
"Set how many probe points can be found for a probe."),
OPT_BOOLEAN('F', "funcs", &params.show_funcs,
"Show potential probe-able functions."),
OPT_CALLBACK('\0', "filter", NULL,
"[!]FILTER", "Set a filter (with --vars/funcs only)\n"
"\t\t\t(default: \"" DEFAULT_VAR_FILTER "\" for --vars,\n"
"\t\t\t \"" DEFAULT_FUNC_FILTER "\" for --funcs)",
opt_set_filter),
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
OPT_END()
};
int cmd_probe(int argc, const char **argv, const char *prefix __used)
{
int ret;
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
argc = parse_options(argc, argv, options, probe_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
if (argc > 0) {
if (strcmp(argv[0], "-") == 0) {
pr_warning(" Error: '-' is not supported.\n");
usage_with_options(probe_usage, options);
}
ret = parse_probe_event_argv(argc, argv);
if (ret < 0) {
pr_err(" Error: Parse Error. (%d)\n", ret);
return ret;
}
}
if (params.max_probe_points == 0)
params.max_probe_points = MAX_PROBES;
if ((!params.nevents && !params.dellist && !params.list_events &&
!params.show_lines && !params.show_funcs))
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
usage_with_options(probe_usage, options);
/*
* Only consider the user's kernel image path if given.
*/
symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name == NULL);
if (params.list_events) {
if (params.mod_events) {
pr_err(" Error: Don't use --list with --add/--del.\n");
usage_with_options(probe_usage, options);
}
if (params.show_lines) {
pr_err(" Error: Don't use --list with --line.\n");
perf probe: Support --line option to show probable source-code lines Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 15:45:34 +01:00
usage_with_options(probe_usage, options);
}
if (params.show_vars) {
pr_err(" Error: Don't use --list with --vars.\n");
usage_with_options(probe_usage, options);
}
if (params.show_funcs) {
pr_err(" Error: Don't use --list with --funcs.\n");
usage_with_options(probe_usage, options);
}
ret = show_perf_probe_events();
if (ret < 0)
pr_err(" Error: Failed to show event list. (%d)\n",
ret);
return ret;
}
if (params.show_funcs) {
if (params.nevents != 0 || params.dellist) {
pr_err(" Error: Don't use --funcs with"
" --add/--del.\n");
usage_with_options(probe_usage, options);
}
if (params.show_lines) {
pr_err(" Error: Don't use --funcs with --line.\n");
usage_with_options(probe_usage, options);
}
if (params.show_vars) {
pr_err(" Error: Don't use --funcs with --vars.\n");
usage_with_options(probe_usage, options);
}
if (!params.filter)
params.filter = strfilter__new(DEFAULT_FUNC_FILTER,
NULL);
ret = show_available_funcs(params.target_module,
params.filter);
strfilter__delete(params.filter);
if (ret < 0)
pr_err(" Error: Failed to show functions."
" (%d)\n", ret);
return ret;
}
#ifdef DWARF_SUPPORT
if (params.show_lines) {
if (params.mod_events) {
pr_err(" Error: Don't use --line with"
" --add/--del.\n");
usage_with_options(probe_usage, options);
}
if (params.show_vars) {
pr_err(" Error: Don't use --line with --vars.\n");
perf probe: Support --line option to show probable source-code lines Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 15:45:34 +01:00
usage_with_options(probe_usage, options);
}
2010-10-21 12:13:41 +02:00
ret = show_line_range(&params.line_range, params.target_module);
if (ret < 0)
pr_err(" Error: Failed to show lines. (%d)\n", ret);
return ret;
perf probe: Support --line option to show probable source-code lines Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 15:45:34 +01:00
}
if (params.show_vars) {
if (params.mod_events) {
pr_err(" Error: Don't use --vars with"
" --add/--del.\n");
usage_with_options(probe_usage, options);
}
if (!params.filter)
params.filter = strfilter__new(DEFAULT_VAR_FILTER,
NULL);
ret = show_available_vars(params.events, params.nevents,
params.max_probe_points,
2010-10-21 12:13:41 +02:00
params.target_module,
params.filter,
params.show_ext_vars);
strfilter__delete(params.filter);
if (ret < 0)
pr_err(" Error: Failed to show vars. (%d)\n", ret);
return ret;
}
perf probe: Support --line option to show probable source-code lines Add --line option to support showing probable source-code lines. perf probe --line SRC:LN[-LN|+NUM] or perf probe --line FUNC[:LN[-LN|+NUM]] This option shows source-code with line number if the line can be probed. Lines without line number (and blue color) means that the line can not be probed, because debuginfo doesn't have the information of those lines. The argument specifies the range of lines, "source.c:100-120" shows lines between 100th to l20th in source.c file. And "func:10+20" shows 20 lines from 10th line of func function. e.g. # ./perf probe --line kernel/sched.c:1080 <kernel/sched.c:1080> * * called with rq->lock held and irqs disabled */ static void hrtick_start(struct rq *rq, u64 delay) { struct hrtimer *timer = &rq->hrtick_timer; 1086 ktime_t time = ktime_add_ns(timer->base->get_time(), delay); hrtimer_set_expires(timer, time); 1090 if (rq == this_rq()) { 1091 hrtimer_restart(timer); 1092 } else if (!rq->hrtick_csd_pending) { 1093 __smp_call_function_single(cpu_of(rq), &rq->hrtick_csd, 1094 rq->hrtick_csd_pending = 1; If you specifying function name, this shows function-relative line number. # ./perf probe --line schedule <schedule:0> asmlinkage void __sched schedule(void) 1 { struct task_struct *prev, *next; unsigned long *switch_count; struct rq *rq; int cpu; need_resched: preempt_disable(); 9 cpu = smp_processor_id(); 10 rq = cpu_rq(cpu); 11 rcu_sched_qs(cpu); 12 prev = rq->curr; 13 switch_count = &prev->nivcsw; Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20100106144534.27218.77939.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 15:45:34 +01:00
#endif
if (params.dellist) {
ret = del_perf_probe_events(params.dellist);
strlist__delete(params.dellist);
if (ret < 0) {
pr_err(" Error: Failed to delete events. (%d)\n", ret);
return ret;
}
}
if (params.nevents) {
ret = add_perf_probe_events(params.events, params.nevents,
params.max_probe_points,
2010-10-21 12:13:41 +02:00
params.target_module,
params.force_add);
if (ret < 0) {
pr_err(" Error: Failed to add events. (%d)\n", ret);
return ret;
}
}
perf: Add perf probe subcommand, a kprobe-event setup helper Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-08 23:17:38 +02:00
return 0;
}