2006-06-29 16:28:18 +02:00
|
|
|
/*
|
|
|
|
* drivers/usb/host/ohci-pnx4008.c
|
|
|
|
*
|
|
|
|
* driver for Philips PNX4008 USB Host
|
|
|
|
*
|
|
|
|
* Authors: Dmitry Chigirev <source@mvista.com>
|
2006-12-05 12:18:31 +01:00
|
|
|
* Vitaly Wool <vitalywool@gmail.com>
|
2006-06-29 16:28:18 +02:00
|
|
|
*
|
|
|
|
* register initialization is based on code examples provided by Philips
|
|
|
|
* Copyright (c) 2005 Koninklijke Philips Electronics N.V.
|
|
|
|
*
|
|
|
|
* NOTE: This driver does not have suspend/resume functionality
|
|
|
|
* This driver is intended for engineering development purposes only
|
|
|
|
*
|
|
|
|
* 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
|
|
|
|
* the terms of the GNU General Public License version 2. This program
|
|
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
|
|
* or implied.
|
|
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
|
2008-08-05 17:14:15 +02:00
|
|
|
#include <mach/hardware.h>
|
2006-06-29 16:28:18 +02:00
|
|
|
#include <asm/io.h>
|
|
|
|
|
2008-08-05 17:14:15 +02:00
|
|
|
#include <mach/platform.h>
|
|
|
|
#include <mach/irqs.h>
|
|
|
|
#include <mach/gpio.h>
|
2006-06-29 16:28:18 +02:00
|
|
|
|
2006-12-05 12:18:31 +01:00
|
|
|
#define USB_CTRL IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
|
2006-06-29 16:28:18 +02:00
|
|
|
|
|
|
|
/* USB_CTRL bit defines */
|
|
|
|
#define USB_SLAVE_HCLK_EN (1 << 24)
|
|
|
|
#define USB_HOST_NEED_CLK_EN (1 << 21)
|
|
|
|
|
|
|
|
#define USB_OTG_CLK_CTRL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF4)
|
|
|
|
#define USB_OTG_CLK_STAT IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xFF8)
|
|
|
|
|
|
|
|
/* USB_OTG_CLK_CTRL bit defines */
|
|
|
|
#define AHB_M_CLOCK_ON (1 << 4)
|
|
|
|
#define OTG_CLOCK_ON (1 << 3)
|
|
|
|
#define I2C_CLOCK_ON (1 << 2)
|
|
|
|
#define DEV_CLOCK_ON (1 << 1)
|
|
|
|
#define HOST_CLOCK_ON (1 << 0)
|
|
|
|
|
|
|
|
#define USB_OTG_STAT_CONTROL IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x110)
|
|
|
|
|
|
|
|
/* USB_OTG_STAT_CONTROL bit defines */
|
|
|
|
#define TRANSPARENT_I2C_EN (1 << 7)
|
|
|
|
#define HOST_EN (1 << 0)
|
|
|
|
|
|
|
|
/* ISP1301 USB transceiver I2C registers */
|
|
|
|
#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
|
|
|
|
|
|
|
|
#define MC1_SPEED_REG (1 << 0)
|
|
|
|
#define MC1_SUSPEND_REG (1 << 1)
|
|
|
|
#define MC1_DAT_SE0 (1 << 2)
|
|
|
|
#define MC1_TRANSPARENT (1 << 3)
|
|
|
|
#define MC1_BDIS_ACON_EN (1 << 4)
|
|
|
|
#define MC1_OE_INT_EN (1 << 5)
|
|
|
|
#define MC1_UART_EN (1 << 6)
|
|
|
|
#define MC1_MASK 0x7f
|
|
|
|
|
|
|
|
#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
|
|
|
|
|
|
|
|
#define MC2_GLOBAL_PWR_DN (1 << 0)
|
|
|
|
#define MC2_SPD_SUSP_CTRL (1 << 1)
|
|
|
|
#define MC2_BI_DI (1 << 2)
|
|
|
|
#define MC2_TRANSP_BDIR0 (1 << 3)
|
|
|
|
#define MC2_TRANSP_BDIR1 (1 << 4)
|
|
|
|
#define MC2_AUDIO_EN (1 << 5)
|
|
|
|
#define MC2_PSW_EN (1 << 6)
|
|
|
|
#define MC2_EN2V7 (1 << 7)
|
|
|
|
|
|
|
|
#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
|
|
|
|
# define OTG1_DP_PULLUP (1 << 0)
|
|
|
|
# define OTG1_DM_PULLUP (1 << 1)
|
|
|
|
# define OTG1_DP_PULLDOWN (1 << 2)
|
|
|
|
# define OTG1_DM_PULLDOWN (1 << 3)
|
|
|
|
# define OTG1_ID_PULLDOWN (1 << 4)
|
|
|
|
# define OTG1_VBUS_DRV (1 << 5)
|
|
|
|
# define OTG1_VBUS_DISCHRG (1 << 6)
|
|
|
|
# define OTG1_VBUS_CHRG (1 << 7)
|
|
|
|
#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */
|
|
|
|
# define OTG_B_SESS_END (1 << 6)
|
|
|
|
# define OTG_B_SESS_VLD (1 << 7)
|
|
|
|
|
|
|
|
#define ISP1301_I2C_ADDR 0x2C
|
|
|
|
|
|
|
|
#define ISP1301_I2C_MODE_CONTROL_1 0x4
|
|
|
|
#define ISP1301_I2C_MODE_CONTROL_2 0x12
|
|
|
|
#define ISP1301_I2C_OTG_CONTROL_1 0x6
|
|
|
|
#define ISP1301_I2C_OTG_CONTROL_2 0x10
|
|
|
|
#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
|
|
|
|
#define ISP1301_I2C_INTERRUPT_LATCH 0xA
|
|
|
|
#define ISP1301_I2C_INTERRUPT_FALLING 0xC
|
|
|
|
#define ISP1301_I2C_INTERRUPT_RISING 0xE
|
|
|
|
#define ISP1301_I2C_REG_CLEAR_ADDR 1
|
|
|
|
|
|
|
|
struct i2c_driver isp1301_driver;
|
|
|
|
struct i2c_client *isp1301_i2c_client;
|
|
|
|
|
|
|
|
extern int usb_disabled(void);
|
|
|
|
extern int ocpi_enable(void);
|
|
|
|
|
|
|
|
static struct clk *usb_clk;
|
|
|
|
|
|
|
|
static int isp1301_probe(struct i2c_adapter *adap);
|
|
|
|
static int isp1301_detach(struct i2c_client *client);
|
|
|
|
|
2008-01-27 18:14:47 +01:00
|
|
|
static const unsigned short normal_i2c[] =
|
2006-06-29 16:28:18 +02:00
|
|
|
{ ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END };
|
2008-01-27 18:14:47 +01:00
|
|
|
static const unsigned short dummy_i2c_addrlist[] = { I2C_CLIENT_END };
|
2006-06-29 16:28:18 +02:00
|
|
|
|
|
|
|
static struct i2c_client_address_data addr_data = {
|
|
|
|
.normal_i2c = normal_i2c,
|
|
|
|
.probe = dummy_i2c_addrlist,
|
|
|
|
.ignore = dummy_i2c_addrlist,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct i2c_driver isp1301_driver = {
|
2008-06-18 14:46:27 +02:00
|
|
|
.driver = {
|
|
|
|
.name = "isp1301_pnx",
|
|
|
|
},
|
2006-06-29 16:28:18 +02:00
|
|
|
.attach_adapter = isp1301_probe,
|
|
|
|
.detach_client = isp1301_detach,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int isp1301_attach(struct i2c_adapter *adap, int addr, int kind)
|
|
|
|
{
|
|
|
|
struct i2c_client *c;
|
2008-06-18 14:46:27 +02:00
|
|
|
int err;
|
2006-06-29 16:28:18 +02:00
|
|
|
|
2007-06-28 19:16:30 +02:00
|
|
|
c = kzalloc(sizeof(*c), GFP_KERNEL);
|
2006-06-29 16:28:18 +02:00
|
|
|
if (!c)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2008-06-18 14:46:27 +02:00
|
|
|
strlcpy(c->name, "isp1301_pnx", I2C_NAME_SIZE);
|
2006-06-29 16:28:18 +02:00
|
|
|
c->flags = 0;
|
|
|
|
c->addr = addr;
|
|
|
|
c->adapter = adap;
|
|
|
|
c->driver = &isp1301_driver;
|
|
|
|
|
2008-06-18 14:46:27 +02:00
|
|
|
err = i2c_attach_client(c);
|
|
|
|
if (err) {
|
|
|
|
kfree(c);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2006-06-29 16:28:18 +02:00
|
|
|
isp1301_i2c_client = c;
|
|
|
|
|
2008-06-18 14:46:27 +02:00
|
|
|
return 0;
|
2006-06-29 16:28:18 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
static int isp1301_probe(struct i2c_adapter *adap)
|
|
|
|
{
|
|
|
|
return i2c_probe(adap, &addr_data, isp1301_attach);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int isp1301_detach(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
i2c_detach_client(client);
|
|
|
|
kfree(isp1301_i2c_client);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void i2c_write(u8 buf, u8 subaddr)
|
|
|
|
{
|
|
|
|
char tmpbuf[2];
|
|
|
|
|
|
|
|
tmpbuf[0] = subaddr; /*register number */
|
|
|
|
tmpbuf[1] = buf; /*register data */
|
|
|
|
i2c_master_send(isp1301_i2c_client, &tmpbuf[0], 2);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void isp1301_configure(void)
|
|
|
|
{
|
|
|
|
/* PNX4008 only supports DAT_SE0 USB mode */
|
|
|
|
/* PNX4008 R2A requires setting the MAX603 to output 3.6V */
|
|
|
|
/* Power up externel charge-pump */
|
|
|
|
|
|
|
|
i2c_write(MC1_DAT_SE0 | MC1_SPEED_REG, ISP1301_I2C_MODE_CONTROL_1);
|
|
|
|
i2c_write(~(MC1_DAT_SE0 | MC1_SPEED_REG),
|
|
|
|
ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
|
|
|
|
i2c_write(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL,
|
|
|
|
ISP1301_I2C_MODE_CONTROL_2);
|
|
|
|
i2c_write(~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL),
|
|
|
|
ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR);
|
|
|
|
i2c_write(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN,
|
|
|
|
ISP1301_I2C_OTG_CONTROL_1);
|
|
|
|
i2c_write(~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN),
|
|
|
|
ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
|
|
|
|
i2c_write(0xFF,
|
|
|
|
ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR);
|
|
|
|
i2c_write(0xFF,
|
|
|
|
ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR);
|
|
|
|
i2c_write(0xFF,
|
|
|
|
ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR);
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void isp1301_vbus_on(void)
|
|
|
|
{
|
|
|
|
i2c_write(OTG1_VBUS_DRV, ISP1301_I2C_OTG_CONTROL_1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void isp1301_vbus_off(void)
|
|
|
|
{
|
|
|
|
i2c_write(OTG1_VBUS_DRV,
|
|
|
|
ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnx4008_start_hc(void)
|
|
|
|
{
|
|
|
|
unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
|
|
|
|
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
|
|
|
|
isp1301_vbus_on();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnx4008_stop_hc(void)
|
|
|
|
{
|
|
|
|
unsigned long tmp;
|
|
|
|
isp1301_vbus_off();
|
|
|
|
tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
|
|
|
|
__raw_writel(tmp, USB_OTG_STAT_CONTROL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit ohci_pnx4008_start(struct usb_hcd *hcd)
|
|
|
|
{
|
|
|
|
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if ((ret = ohci_init(ohci)) < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if ((ret = ohci_run(ohci)) < 0) {
|
|
|
|
dev_err(hcd->self.controller, "can't start\n");
|
|
|
|
ohci_stop(hcd);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct hc_driver ohci_pnx4008_hc_driver = {
|
|
|
|
.description = hcd_name,
|
|
|
|
.product_desc = "pnx4008 OHCI",
|
|
|
|
|
|
|
|
/*
|
|
|
|
* generic hardware linkage
|
|
|
|
*/
|
|
|
|
.irq = ohci_irq,
|
|
|
|
.flags = HCD_USB11 | HCD_MEMORY,
|
|
|
|
|
|
|
|
.hcd_priv_size = sizeof(struct ohci_hcd),
|
|
|
|
/*
|
|
|
|
* basic lifecycle operations
|
|
|
|
*/
|
|
|
|
.start = ohci_pnx4008_start,
|
|
|
|
.stop = ohci_stop,
|
2006-10-02 16:20:10 +02:00
|
|
|
.shutdown = ohci_shutdown,
|
2006-06-29 16:28:18 +02:00
|
|
|
|
|
|
|
/*
|
|
|
|
* managing i/o requests and associated device resources
|
|
|
|
*/
|
|
|
|
.urb_enqueue = ohci_urb_enqueue,
|
|
|
|
.urb_dequeue = ohci_urb_dequeue,
|
|
|
|
.endpoint_disable = ohci_endpoint_disable,
|
|
|
|
|
|
|
|
/*
|
|
|
|
* scheduling support
|
|
|
|
*/
|
|
|
|
.get_frame_number = ohci_get_frame,
|
|
|
|
|
|
|
|
/*
|
|
|
|
* root hub support
|
|
|
|
*/
|
|
|
|
.hub_status_data = ohci_hub_status_data,
|
|
|
|
.hub_control = ohci_hub_control,
|
2006-10-02 16:20:10 +02:00
|
|
|
#ifdef CONFIG_PM
|
|
|
|
.bus_suspend = ohci_bus_suspend,
|
|
|
|
.bus_resume = ohci_bus_resume,
|
|
|
|
#endif
|
2006-06-29 16:28:18 +02:00
|
|
|
.start_port_reset = ohci_start_port_reset,
|
|
|
|
};
|
|
|
|
|
|
|
|
#define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON)
|
|
|
|
|
|
|
|
static void pnx4008_set_usb_bits(void)
|
|
|
|
{
|
|
|
|
start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
|
|
|
|
start_int_ack(SE_USB_OTG_ATX_INT_N);
|
|
|
|
start_int_umask(SE_USB_OTG_ATX_INT_N);
|
|
|
|
|
|
|
|
start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
|
|
|
|
start_int_ack(SE_USB_OTG_TIMER_INT);
|
|
|
|
start_int_umask(SE_USB_OTG_TIMER_INT);
|
|
|
|
|
|
|
|
start_int_set_rising_edge(SE_USB_I2C_INT);
|
|
|
|
start_int_ack(SE_USB_I2C_INT);
|
|
|
|
start_int_umask(SE_USB_I2C_INT);
|
|
|
|
|
|
|
|
start_int_set_rising_edge(SE_USB_INT);
|
|
|
|
start_int_ack(SE_USB_INT);
|
|
|
|
start_int_umask(SE_USB_INT);
|
|
|
|
|
|
|
|
start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
|
|
|
|
start_int_ack(SE_USB_NEED_CLK_INT);
|
|
|
|
start_int_umask(SE_USB_NEED_CLK_INT);
|
|
|
|
|
|
|
|
start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
|
|
|
|
start_int_ack(SE_USB_AHB_NEED_CLK_INT);
|
|
|
|
start_int_umask(SE_USB_AHB_NEED_CLK_INT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pnx4008_unset_usb_bits(void)
|
|
|
|
{
|
|
|
|
start_int_mask(SE_USB_OTG_ATX_INT_N);
|
|
|
|
start_int_mask(SE_USB_OTG_TIMER_INT);
|
|
|
|
start_int_mask(SE_USB_I2C_INT);
|
|
|
|
start_int_mask(SE_USB_INT);
|
|
|
|
start_int_mask(SE_USB_NEED_CLK_INT);
|
|
|
|
start_int_mask(SE_USB_AHB_NEED_CLK_INT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct usb_hcd *hcd = 0;
|
|
|
|
struct ohci_hcd *ohci;
|
|
|
|
const struct hc_driver *driver = &ohci_pnx4008_hc_driver;
|
|
|
|
|
|
|
|
int ret = 0, irq;
|
|
|
|
|
2008-10-02 17:47:15 +02:00
|
|
|
dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (pnx4008)\n", hcd_name);
|
2006-06-29 16:28:18 +02:00
|
|
|
if (usb_disabled()) {
|
|
|
|
err("USB is disabled");
|
|
|
|
ret = -ENODEV;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (pdev->num_resources != 2
|
|
|
|
|| pdev->resource[0].flags != IORESOURCE_MEM
|
|
|
|
|| pdev->resource[1].flags != IORESOURCE_IRQ) {
|
|
|
|
err("Invalid resource configuration");
|
|
|
|
ret = -ENODEV;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Enable AHB slave USB clock, needed for further USB clock control */
|
|
|
|
__raw_writel(USB_SLAVE_HCLK_EN | (1 << 19), USB_CTRL);
|
|
|
|
|
|
|
|
ret = i2c_add_driver(&isp1301_driver);
|
|
|
|
if (ret < 0) {
|
|
|
|
err("failed to connect I2C to ISP1301 USB Transceiver");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
isp1301_configure();
|
|
|
|
|
|
|
|
/* Enable USB PLL */
|
|
|
|
usb_clk = clk_get(&pdev->dev, "ck_pll5");
|
|
|
|
if (IS_ERR(usb_clk)) {
|
|
|
|
err("failed to acquire USB PLL");
|
|
|
|
ret = PTR_ERR(usb_clk);
|
|
|
|
goto out1;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = clk_enable(usb_clk);
|
|
|
|
if (ret < 0) {
|
|
|
|
err("failed to start USB PLL");
|
|
|
|
goto out2;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = clk_set_rate(usb_clk, 48000);
|
|
|
|
if (ret < 0) {
|
|
|
|
err("failed to set USB clock rate");
|
|
|
|
goto out3;
|
|
|
|
}
|
|
|
|
|
|
|
|
__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
|
|
|
|
|
|
|
|
/* Set to enable all needed USB clocks */
|
|
|
|
__raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL);
|
|
|
|
|
|
|
|
while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) !=
|
|
|
|
USB_CLOCK_MASK) ;
|
|
|
|
|
2008-05-02 06:02:41 +02:00
|
|
|
hcd = usb_create_hcd (driver, &pdev->dev, dev_name(&pdev->dev));
|
2006-06-29 16:28:18 +02:00
|
|
|
if (!hcd) {
|
|
|
|
err("Failed to allocate HC buffer");
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out3;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set all USB bits in the Start Enable register */
|
|
|
|
pnx4008_set_usb_bits();
|
|
|
|
|
|
|
|
hcd->rsrc_start = pdev->resource[0].start;
|
|
|
|
hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
|
|
|
|
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
|
|
|
|
dev_dbg(&pdev->dev, "request_mem_region failed\n");
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out4;
|
|
|
|
}
|
|
|
|
hcd->regs = (void __iomem *)pdev->resource[0].start;
|
|
|
|
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (irq < 0) {
|
|
|
|
ret = -ENXIO;
|
|
|
|
goto out4;
|
|
|
|
}
|
|
|
|
|
|
|
|
pnx4008_start_hc();
|
|
|
|
platform_set_drvdata(pdev, hcd);
|
|
|
|
ohci = hcd_to_ohci(hcd);
|
|
|
|
ohci_hcd_init(ohci);
|
|
|
|
|
|
|
|
dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
|
2007-02-14 09:33:16 +01:00
|
|
|
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
|
2006-06-29 16:28:18 +02:00
|
|
|
if (ret == 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
pnx4008_stop_hc();
|
|
|
|
out4:
|
|
|
|
pnx4008_unset_usb_bits();
|
|
|
|
usb_put_hcd(hcd);
|
|
|
|
out3:
|
|
|
|
clk_disable(usb_clk);
|
|
|
|
out2:
|
|
|
|
clk_put(usb_clk);
|
|
|
|
out1:
|
|
|
|
i2c_del_driver(&isp1301_driver);
|
|
|
|
out:
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int usb_hcd_pnx4008_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
usb_remove_hcd(hcd);
|
|
|
|
pnx4008_stop_hc();
|
|
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
|
|
usb_put_hcd(hcd);
|
|
|
|
pnx4008_unset_usb_bits();
|
|
|
|
clk_disable(usb_clk);
|
|
|
|
clk_put(usb_clk);
|
|
|
|
i2c_del_driver(&isp1301_driver);
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2008-04-11 06:29:22 +02:00
|
|
|
/* work with hotplug and coldplug */
|
|
|
|
MODULE_ALIAS("platform:usb-ohci");
|
|
|
|
|
2006-06-29 16:28:18 +02:00
|
|
|
static struct platform_driver usb_hcd_pnx4008_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "usb-ohci",
|
2008-04-11 06:29:22 +02:00
|
|
|
.owner = THIS_MODULE,
|
2006-06-29 16:28:18 +02:00
|
|
|
},
|
|
|
|
.probe = usb_hcd_pnx4008_probe,
|
|
|
|
.remove = usb_hcd_pnx4008_remove,
|
|
|
|
};
|
|
|
|
|