OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/drivers/clk/clk-multiplier.c

157 lines
3.8 KiB
C
Raw Normal View History

clk: Tag basic clk types with SPDX These are all GPL-2.0 files per the existing license text. Replace the boiler plate with the tag. Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-11 18:57:48 +01:00
// SPDX-License-Identifier: GPL-2.0
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
/*
* Copyright (C) 2015 Maxime Ripard <maxime.ripard@free-electrons.com>
*/
#include <linux/bitops.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/export.h>
clk: Remove io.h from clk-provider.h Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-19 00:20:22 +02:00
#include <linux/io.h>
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/slab.h>
clk: multiplier: add explicit big endian support Add a clock specific flag to switch register accesses to big endian, to allow runtime configuration of big endian multiplier clocks. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 13:12:07 +02:00
static inline u32 clk_mult_readl(struct clk_multiplier *mult)
{
if (mult->flags & CLK_MULTIPLIER_BIG_ENDIAN)
return ioread32be(mult->reg);
clk: core: replace clk_{readl,writel} with {readl,writel} Now that clk_{readl,writel} is just an alias for {readl,writel}, we can switch all users of clk_* to use the accessors directly and remove the helpers. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [sboyd@kernel.org: Also convert renesas file so that this can be compile independently] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 13:12:11 +02:00
return readl(mult->reg);
clk: multiplier: add explicit big endian support Add a clock specific flag to switch register accesses to big endian, to allow runtime configuration of big endian multiplier clocks. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 13:12:07 +02:00
}
static inline void clk_mult_writel(struct clk_multiplier *mult, u32 val)
{
if (mult->flags & CLK_MULTIPLIER_BIG_ENDIAN)
iowrite32be(val, mult->reg);
else
clk: core: replace clk_{readl,writel} with {readl,writel} Now that clk_{readl,writel} is just an alias for {readl,writel}, we can switch all users of clk_* to use the accessors directly and remove the helpers. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [sboyd@kernel.org: Also convert renesas file so that this can be compile independently] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 13:12:11 +02:00
writel(val, mult->reg);
clk: multiplier: add explicit big endian support Add a clock specific flag to switch register accesses to big endian, to allow runtime configuration of big endian multiplier clocks. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 13:12:07 +02:00
}
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
static unsigned long __get_mult(struct clk_multiplier *mult,
unsigned long rate,
unsigned long parent_rate)
{
if (mult->flags & CLK_MULTIPLIER_ROUND_CLOSEST)
return DIV_ROUND_CLOSEST(rate, parent_rate);
return rate / parent_rate;
}
static unsigned long clk_multiplier_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_multiplier *mult = to_clk_multiplier(hw);
unsigned long val;
clk: multiplier: add explicit big endian support Add a clock specific flag to switch register accesses to big endian, to allow runtime configuration of big endian multiplier clocks. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 13:12:07 +02:00
val = clk_mult_readl(mult) >> mult->shift;
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
val &= GENMASK(mult->width - 1, 0);
if (!val && mult->flags & CLK_MULTIPLIER_ZERO_BYPASS)
val = 1;
return parent_rate * val;
}
static bool __is_best_rate(unsigned long rate, unsigned long new,
unsigned long best, unsigned long flags)
{
if (flags & CLK_MULTIPLIER_ROUND_CLOSEST)
return abs(rate - new) < abs(rate - best);
return new >= rate && new < best;
}
static unsigned long __bestmult(struct clk_hw *hw, unsigned long rate,
unsigned long *best_parent_rate,
u8 width, unsigned long flags)
{
clk: multiplier: Prevent the multiplier from under / over flowing In the current multiplier base clock implementation, if the CLK_SET_RATE_PARENT flag isn't set, the code will not make sure that the multiplier computed remains within the boundaries of our clock. This means that if the clock we want to reach is below the parent rate, or if the multiplier is above the maximum that we can reach, we will end up with a completely bogus one that the clock cannot achieve. Fixes: f2e0a53271a4 ("clk: Add a basic multiplier clock") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1463402840-17062-3-git-send-email-maxime.ripard@free-electrons.com
2016-05-16 14:47:02 +02:00
struct clk_multiplier *mult = to_clk_multiplier(hw);
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
unsigned long orig_parent_rate = *best_parent_rate;
unsigned long parent_rate, current_rate, best_rate = ~0;
unsigned int i, bestmult = 0;
clk: multiplier: Prevent the multiplier from under / over flowing In the current multiplier base clock implementation, if the CLK_SET_RATE_PARENT flag isn't set, the code will not make sure that the multiplier computed remains within the boundaries of our clock. This means that if the clock we want to reach is below the parent rate, or if the multiplier is above the maximum that we can reach, we will end up with a completely bogus one that the clock cannot achieve. Fixes: f2e0a53271a4 ("clk: Add a basic multiplier clock") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1463402840-17062-3-git-send-email-maxime.ripard@free-electrons.com
2016-05-16 14:47:02 +02:00
unsigned int maxmult = (1 << width) - 1;
if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
bestmult = rate / orig_parent_rate;
/* Make sure we don't end up with a 0 multiplier */
if ((bestmult == 0) &&
!(mult->flags & CLK_MULTIPLIER_ZERO_BYPASS))
bestmult = 1;
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
clk: multiplier: Prevent the multiplier from under / over flowing In the current multiplier base clock implementation, if the CLK_SET_RATE_PARENT flag isn't set, the code will not make sure that the multiplier computed remains within the boundaries of our clock. This means that if the clock we want to reach is below the parent rate, or if the multiplier is above the maximum that we can reach, we will end up with a completely bogus one that the clock cannot achieve. Fixes: f2e0a53271a4 ("clk: Add a basic multiplier clock") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1463402840-17062-3-git-send-email-maxime.ripard@free-electrons.com
2016-05-16 14:47:02 +02:00
/* Make sure we don't overflow the multiplier */
if (bestmult > maxmult)
bestmult = maxmult;
return bestmult;
}
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
clk: multiplier: Prevent the multiplier from under / over flowing In the current multiplier base clock implementation, if the CLK_SET_RATE_PARENT flag isn't set, the code will not make sure that the multiplier computed remains within the boundaries of our clock. This means that if the clock we want to reach is below the parent rate, or if the multiplier is above the maximum that we can reach, we will end up with a completely bogus one that the clock cannot achieve. Fixes: f2e0a53271a4 ("clk: Add a basic multiplier clock") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1463402840-17062-3-git-send-email-maxime.ripard@free-electrons.com
2016-05-16 14:47:02 +02:00
for (i = 1; i < maxmult; i++) {
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
if (rate == orig_parent_rate * i) {
/*
* This is the best case for us if we have a
* perfect match without changing the parent
* rate.
*/
*best_parent_rate = orig_parent_rate;
return i;
}
parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
rate / i);
current_rate = parent_rate * i;
if (__is_best_rate(rate, current_rate, best_rate, flags)) {
bestmult = i;
best_rate = current_rate;
*best_parent_rate = parent_rate;
}
}
return bestmult;
}
static long clk_multiplier_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct clk_multiplier *mult = to_clk_multiplier(hw);
unsigned long factor = __bestmult(hw, rate, parent_rate,
mult->width, mult->flags);
return *parent_rate * factor;
}
static int clk_multiplier_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_multiplier *mult = to_clk_multiplier(hw);
unsigned long factor = __get_mult(mult, rate, parent_rate);
unsigned long flags = 0;
unsigned long val;
if (mult->lock)
spin_lock_irqsave(mult->lock, flags);
else
__acquire(mult->lock);
clk: multiplier: add explicit big endian support Add a clock specific flag to switch register accesses to big endian, to allow runtime configuration of big endian multiplier clocks. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 13:12:07 +02:00
val = clk_mult_readl(mult);
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
val &= ~GENMASK(mult->width + mult->shift - 1, mult->shift);
val |= factor << mult->shift;
clk: multiplier: add explicit big endian support Add a clock specific flag to switch register accesses to big endian, to allow runtime configuration of big endian multiplier clocks. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-18 13:12:07 +02:00
clk_mult_writel(mult, val);
clk: Add a basic multiplier clock Some clocks are using a multiplier component, however, unlike their mux, gate or divider counterpart, these factors don't have a basic clock implementation. This leads to code duplication across platforms that want to use that kind of clocks, and the impossibility to use the composite clocks with such a clock without defining your own rate operations. Create such a driver in order to remove these issues, and hopefully factor the implementations, reducing code size across platforms and consolidating the various implementations. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2015-05-19 22:19:33 +02:00
if (mult->lock)
spin_unlock_irqrestore(mult->lock, flags);
else
__release(mult->lock);
return 0;
}
const struct clk_ops clk_multiplier_ops = {
.recalc_rate = clk_multiplier_recalc_rate,
.round_rate = clk_multiplier_round_rate,
.set_rate = clk_multiplier_set_rate,
};
EXPORT_SYMBOL_GPL(clk_multiplier_ops);