License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2018-05-15 07:35:03 +02:00
|
|
|
/* eBPF instruction mini library */
|
|
|
|
|
#ifndef __BPF_INSN_H
|
|
|
|
|
#define __BPF_INSN_H
|
bpf: mini eBPF library, test stubs and verifier testsuite
1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
const struct sock_filter_int *insns, int insn_len,
const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array
and BPF_*() macros to build instructions
2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.
3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.
$ sudo ./test_verifier
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
...
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 09:17:07 +02:00
|
|
|
|
samples/bpf: Switch over to libbpf
Now that libbpf under tools/lib/bpf/* is synced with the version from
samples/bpf, we can get rid most of the libbpf library here.
Committer notes:
Built it in a docker fedora rawhide container and ran it in the f25 host, seems
to work just like it did before this patch, i.e. the switch to tools/lib/bpf/
doesn't seem to have introduced problems and Joe said he tested it with
all the entries in samples/bpf/ and other code he found:
[root@f5065a7d6272 linux]# make -j4 O=/tmp/build/linux headers_install
<SNIP>
[root@f5065a7d6272 linux]# rm -rf /tmp/build/linux/samples/bpf/
[root@f5065a7d6272 linux]# make -j4 O=/tmp/build/linux samples/bpf/
make[1]: Entering directory '/tmp/build/linux'
CHK include/config/kernel.release
HOSTCC scripts/basic/fixdep
GEN ./Makefile
CHK include/generated/uapi/linux/version.h
Using /git/linux as source for kernel
CHK include/generated/utsrelease.h
HOSTCC scripts/basic/bin2c
HOSTCC arch/x86/tools/relocs_32.o
HOSTCC arch/x86/tools/relocs_64.o
LD samples/bpf/built-in.o
<SNIP>
HOSTCC samples/bpf/fds_example.o
HOSTCC samples/bpf/sockex1_user.o
/git/linux/samples/bpf/fds_example.c: In function 'bpf_prog_create':
/git/linux/samples/bpf/fds_example.c:63:6: warning: passing argument 2 of 'bpf_load_program' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
insns, insns_cnt, "GPL", 0,
^~~~~
In file included from /git/linux/samples/bpf/libbpf.h:5:0,
from /git/linux/samples/bpf/bpf_load.h:4,
from /git/linux/samples/bpf/fds_example.c:15:
/git/linux/tools/lib/bpf/bpf.h:31:5: note: expected 'struct bpf_insn *' but argument is of type 'const struct bpf_insn *'
int bpf_load_program(enum bpf_prog_type type, struct bpf_insn *insns,
^~~~~~~~~~~~~~~~
HOSTCC samples/bpf/sockex2_user.o
<SNIP>
HOSTCC samples/bpf/xdp_tx_iptunnel_user.o
clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.2.1/include -I/git/linux/arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I/git/linux/include -I./include -I/git/linux/arch/x86/include/uapi -I/git/linux/include/uapi -I./include/generated/uapi -include /git/linux/include/linux/kconfig.h \
-D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
-Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
-Wno-address-of-packed-member -Wno-tautological-compare \
-O2 -emit-llvm -c /git/linux/samples/bpf/sockex1_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/sockex1_kern.o
HOSTLD samples/bpf/tc_l2_redirect
<SNIP>
HOSTLD samples/bpf/lwt_len_hist
HOSTLD samples/bpf/xdp_tx_iptunnel
make[1]: Leaving directory '/tmp/build/linux'
[root@f5065a7d6272 linux]#
And then, in the host:
[root@jouet bpf]# mount | grep "docker.*devicemapper\/"
/dev/mapper/docker-253:0-1705076-9bd8aa1e0af33adce89ff42090847868ca676932878942be53941a06ec5923f9 on /var/lib/docker/devicemapper/mnt/9bd8aa1e0af33adce89ff42090847868ca676932878942be53941a06ec5923f9 type xfs (rw,relatime,context="system_u:object_r:container_file_t:s0:c73,c276",nouuid,attr2,inode64,sunit=1024,swidth=1024,noquota)
[root@jouet bpf]# cd /var/lib/docker/devicemapper/mnt/9bd8aa1e0af33adce89ff42090847868ca676932878942be53941a06ec5923f9/rootfs/tmp/build/linux/samples/bpf/
[root@jouet bpf]# file offwaketime
offwaketime: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=f423d171e0487b2f802b6a792657f0f3c8f6d155, not stripped
[root@jouet bpf]# readelf -SW offwaketime
offwaketime offwaketime_kern.o offwaketime_user.o
[root@jouet bpf]# readelf -SW offwaketime_kern.o
There are 11 section headers, starting at offset 0x700:
Section Headers:
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 0] NULL 0000000000000000 000000 000000 00 0 0 0
[ 1] .strtab STRTAB 0000000000000000 000658 0000a8 00 0 0 1
[ 2] .text PROGBITS 0000000000000000 000040 000000 00 AX 0 0 4
[ 3] kprobe/try_to_wake_up PROGBITS 0000000000000000 000040 0000d8 00 AX 0 0 8
[ 4] .relkprobe/try_to_wake_up REL 0000000000000000 0005a8 000020 10 10 3 8
[ 5] tracepoint/sched/sched_switch PROGBITS 0000000000000000 000118 000318 00 AX 0 0 8
[ 6] .reltracepoint/sched/sched_switch REL 0000000000000000 0005c8 000090 10 10 5 8
[ 7] maps PROGBITS 0000000000000000 000430 000050 00 WA 0 0 4
[ 8] license PROGBITS 0000000000000000 000480 000004 00 WA 0 0 1
[ 9] version PROGBITS 0000000000000000 000484 000004 00 WA 0 0 4
[10] .symtab SYMTAB 0000000000000000 000488 000120 18 1 4 8
Key to Flags:
W (write), A (alloc), X (execute), M (merge), S (strings)
I (info), L (link order), G (group), T (TLS), E (exclude), x (unknown)
O (extra OS processing required) o (OS specific), p (processor specific)
[root@jouet bpf]# ./offwaketime | head -3
qemu-system-x86;entry_SYSCALL_64_fastpath;sys_ppoll;do_sys_poll;poll_schedule_timeout;schedule_hrtimeout_range;schedule_hrtimeout_range_clock;schedule;__schedule;-;try_to_wake_up;hrtimer_wakeup;__hrtimer_run_queues;hrtimer_interrupt;local_apic_timer_interrupt;smp_apic_timer_interrupt;__irqentry_text_start;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel;start_cpu;;swapper/0 4
firefox;entry_SYSCALL_64_fastpath;sys_poll;do_sys_poll;poll_schedule_timeout;schedule_hrtimeout_range;schedule_hrtimeout_range_clock;schedule;__schedule;-;try_to_wake_up;pollwake;__wake_up_common;__wake_up_sync_key;pipe_write;__vfs_write;vfs_write;sys_write;entry_SYSCALL_64_fastpath;;Timer 1
swapper/2;start_cpu;start_secondary;cpu_startup_entry;schedule_preempt_disabled;schedule;__schedule;-;---;; 61
[root@jouet bpf]#
Signed-off-by: Joe Stringer <joe@ovn.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: https://github.com/joestringer/linux/commit/5c40f54a52b1f437123c81e21873f4b4b1f9bd55.patch
Link: http://lkml.kernel.org/n/tip-xr8twtx7sjh5821g8qw47yxk@git.kernel.org
[ Use -I$(srctree)/tools/lib/ to support out of source code tree builds, as noticed by Wang Nan ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-14 23:43:39 +01:00
|
|
|
struct bpf_insn;
|
bpf: mini eBPF library, test stubs and verifier testsuite
1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
const struct sock_filter_int *insns, int insn_len,
const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array
and BPF_*() macros to build instructions
2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.
3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.
$ sudo ./test_verifier
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
...
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 09:17:07 +02:00
|
|
|
|
|
|
|
|
/* ALU ops on registers, bpf_add|sub|...: dst_reg += src_reg */
|
|
|
|
|
|
|
|
|
|
#define BPF_ALU64_REG(OP, DST, SRC) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_ALU64 | BPF_OP(OP) | BPF_X, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
|
|
|
|
#define BPF_ALU32_REG(OP, DST, SRC) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_ALU | BPF_OP(OP) | BPF_X, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
|
|
|
|
/* ALU ops on immediates, bpf_add|sub|...: dst_reg += imm32 */
|
|
|
|
|
|
|
|
|
|
#define BPF_ALU64_IMM(OP, DST, IMM) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_ALU64 | BPF_OP(OP) | BPF_K, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = IMM })
|
|
|
|
|
|
|
|
|
|
#define BPF_ALU32_IMM(OP, DST, IMM) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_ALU | BPF_OP(OP) | BPF_K, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = IMM })
|
|
|
|
|
|
|
|
|
|
/* Short form of mov, dst_reg = src_reg */
|
|
|
|
|
|
|
|
|
|
#define BPF_MOV64_REG(DST, SRC) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_ALU64 | BPF_MOV | BPF_X, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
2015-10-08 07:23:23 +02:00
|
|
|
#define BPF_MOV32_REG(DST, SRC) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_ALU | BPF_MOV | BPF_X, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
bpf: mini eBPF library, test stubs and verifier testsuite
1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
const struct sock_filter_int *insns, int insn_len,
const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array
and BPF_*() macros to build instructions
2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.
3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.
$ sudo ./test_verifier
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
...
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 09:17:07 +02:00
|
|
|
/* Short form of mov, dst_reg = imm32 */
|
|
|
|
|
|
|
|
|
|
#define BPF_MOV64_IMM(DST, IMM) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_ALU64 | BPF_MOV | BPF_K, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = 0, \
|
2016-09-28 16:54:32 +02:00
|
|
|
.imm = IMM })
|
|
|
|
|
|
|
|
|
|
#define BPF_MOV32_IMM(DST, IMM) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_ALU | BPF_MOV | BPF_K, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = 0, \
|
bpf: mini eBPF library, test stubs and verifier testsuite
1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
const struct sock_filter_int *insns, int insn_len,
const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array
and BPF_*() macros to build instructions
2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.
3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.
$ sudo ./test_verifier
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
...
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 09:17:07 +02:00
|
|
|
.imm = IMM })
|
|
|
|
|
|
|
|
|
|
/* BPF_LD_IMM64 macro encodes single 'load 64-bit immediate' insn */
|
|
|
|
|
#define BPF_LD_IMM64(DST, IMM) \
|
|
|
|
|
BPF_LD_IMM64_RAW(DST, 0, IMM)
|
|
|
|
|
|
|
|
|
|
#define BPF_LD_IMM64_RAW(DST, SRC, IMM) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_LD | BPF_DW | BPF_IMM, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = (__u32) (IMM) }), \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = 0, /* zero is reserved opcode */ \
|
|
|
|
|
.dst_reg = 0, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = ((__u64) (IMM)) >> 32 })
|
|
|
|
|
|
2015-03-01 12:31:43 +01:00
|
|
|
#ifndef BPF_PSEUDO_MAP_FD
|
|
|
|
|
# define BPF_PSEUDO_MAP_FD 1
|
|
|
|
|
#endif
|
bpf: mini eBPF library, test stubs and verifier testsuite
1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
const struct sock_filter_int *insns, int insn_len,
const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array
and BPF_*() macros to build instructions
2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.
3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.
$ sudo ./test_verifier
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
...
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 09:17:07 +02:00
|
|
|
|
|
|
|
|
/* pseudo BPF_LD_IMM64 insn used to refer to process-local map_fd */
|
|
|
|
|
#define BPF_LD_MAP_FD(DST, MAP_FD) \
|
|
|
|
|
BPF_LD_IMM64_RAW(DST, BPF_PSEUDO_MAP_FD, MAP_FD)
|
|
|
|
|
|
|
|
|
|
|
2014-12-02 00:06:36 +01:00
|
|
|
/* Direct packet access, R0 = *(uint *) (skb->data + imm32) */
|
|
|
|
|
|
|
|
|
|
#define BPF_LD_ABS(SIZE, IMM) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_LD | BPF_SIZE(SIZE) | BPF_ABS, \
|
|
|
|
|
.dst_reg = 0, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = IMM })
|
|
|
|
|
|
bpf: mini eBPF library, test stubs and verifier testsuite
1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
const struct sock_filter_int *insns, int insn_len,
const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array
and BPF_*() macros to build instructions
2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.
3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.
$ sudo ./test_verifier
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
...
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 09:17:07 +02:00
|
|
|
/* Memory load, dst_reg = *(uint *) (src_reg + off16) */
|
|
|
|
|
|
|
|
|
|
#define BPF_LDX_MEM(SIZE, DST, SRC, OFF) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_LDX | BPF_SIZE(SIZE) | BPF_MEM, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = OFF, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
|
|
|
|
/* Memory store, *(uint *) (dst_reg + off16) = src_reg */
|
|
|
|
|
|
|
|
|
|
#define BPF_STX_MEM(SIZE, DST, SRC, OFF) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_STX | BPF_SIZE(SIZE) | BPF_MEM, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = OFF, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
2017-03-23 01:27:36 +01:00
|
|
|
/* Atomic memory add, *(uint *)(dst_reg + off16) += src_reg */
|
|
|
|
|
|
|
|
|
|
#define BPF_STX_XADD(SIZE, DST, SRC, OFF) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_STX | BPF_SIZE(SIZE) | BPF_XADD, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = OFF, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
bpf: mini eBPF library, test stubs and verifier testsuite
1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
const struct sock_filter_int *insns, int insn_len,
const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array
and BPF_*() macros to build instructions
2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.
3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.
$ sudo ./test_verifier
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
...
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 09:17:07 +02:00
|
|
|
/* Memory store, *(uint *) (dst_reg + off16) = imm32 */
|
|
|
|
|
|
|
|
|
|
#define BPF_ST_MEM(SIZE, DST, OFF, IMM) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_ST | BPF_SIZE(SIZE) | BPF_MEM, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = OFF, \
|
|
|
|
|
.imm = IMM })
|
|
|
|
|
|
|
|
|
|
/* Conditional jumps against registers, if (dst_reg 'op' src_reg) goto pc + off16 */
|
|
|
|
|
|
|
|
|
|
#define BPF_JMP_REG(OP, DST, SRC, OFF) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_JMP | BPF_OP(OP) | BPF_X, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = OFF, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
2019-01-26 18:26:13 +01:00
|
|
|
/* Like BPF_JMP_REG, but with 32-bit wide operands for comparison. */
|
|
|
|
|
|
|
|
|
|
#define BPF_JMP32_REG(OP, DST, SRC, OFF) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_JMP32 | BPF_OP(OP) | BPF_X, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = OFF, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
bpf: mini eBPF library, test stubs and verifier testsuite
1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
const struct sock_filter_int *insns, int insn_len,
const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array
and BPF_*() macros to build instructions
2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.
3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.
$ sudo ./test_verifier
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
...
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 09:17:07 +02:00
|
|
|
/* Conditional jumps against immediates, if (dst_reg 'op' imm32) goto pc + off16 */
|
|
|
|
|
|
|
|
|
|
#define BPF_JMP_IMM(OP, DST, IMM, OFF) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_JMP | BPF_OP(OP) | BPF_K, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = OFF, \
|
|
|
|
|
.imm = IMM })
|
|
|
|
|
|
2019-01-26 18:26:13 +01:00
|
|
|
/* Like BPF_JMP_IMM, but with 32-bit wide operands for comparison. */
|
|
|
|
|
|
|
|
|
|
#define BPF_JMP32_IMM(OP, DST, IMM, OFF) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_JMP32 | BPF_OP(OP) | BPF_K, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = OFF, \
|
|
|
|
|
.imm = IMM })
|
|
|
|
|
|
bpf: mini eBPF library, test stubs and verifier testsuite
1.
the library includes a trivial set of BPF syscall wrappers:
int bpf_create_map(int key_size, int value_size, int max_entries);
int bpf_update_elem(int fd, void *key, void *value);
int bpf_lookup_elem(int fd, void *key, void *value);
int bpf_delete_elem(int fd, void *key);
int bpf_get_next_key(int fd, void *key, void *next_key);
int bpf_prog_load(enum bpf_prog_type prog_type,
const struct sock_filter_int *insns, int insn_len,
const char *license);
bpf_prog_load() stores verifier log into global bpf_log_buf[] array
and BPF_*() macros to build instructions
2.
test stubs configure eBPF infra with 'unspec' map and program types.
These are fake types used by user space testsuite only.
3.
verifier tests valid and invalid programs and expects predefined
error log messages from kernel.
40 tests so far.
$ sudo ./test_verifier
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
...
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26 09:17:07 +02:00
|
|
|
/* Raw code statement block */
|
|
|
|
|
|
|
|
|
|
#define BPF_RAW_INSN(CODE, DST, SRC, OFF, IMM) \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = CODE, \
|
|
|
|
|
.dst_reg = DST, \
|
|
|
|
|
.src_reg = SRC, \
|
|
|
|
|
.off = OFF, \
|
|
|
|
|
.imm = IMM })
|
|
|
|
|
|
|
|
|
|
/* Program exit */
|
|
|
|
|
|
|
|
|
|
#define BPF_EXIT_INSN() \
|
|
|
|
|
((struct bpf_insn) { \
|
|
|
|
|
.code = BPF_JMP | BPF_EXIT, \
|
|
|
|
|
.dst_reg = 0, \
|
|
|
|
|
.src_reg = 0, \
|
|
|
|
|
.off = 0, \
|
|
|
|
|
.imm = 0 })
|
|
|
|
|
|
|
|
|
|
#endif
|