linux/drivers/acpi/pci_irq.c

540 lines
14 KiB
C
Raw Normal View History

/*
* pci_irq.c - ACPI PCI Interrupt Routing ($Revision: 11 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2002 Dominik Brodowski <devel@brodo.de>
* (c) Copyright 2008 Hewlett-Packard Development Company, L.P.
* Bjorn Helgaas <bjorn.helgaas@hp.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/dmi.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/acpi.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 09:04:11 +01:00
#include <linux/slab.h>
x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected" Per the x86-specific footnote to PCI spec r3.0, sec 6.2.4, the value 255 in the Interrupt Line register means "unknown" or "no connection." Previously, when we couldn't derive an IRQ from the _PRT, we fell back to using the value from Interrupt Line as an IRQ. It's questionable whether we should do that at all, but the spec clearly suggests we shouldn't do it for the value 255 on x86. Calling request_irq() with IRQ 255 may succeed, but the driver won't receive any interrupts. Or, if IRQ 255 is shared with another device, it may succeed, and the driver's ISR will be called at random times when the *other* device interrupts. Or it may fail if another device is using IRQ 255 with incompatible flags. What we *want* is for request_irq() to fail predictably so the driver can fall back to polling. On x86, assume 255 in the Interrupt Line means the INTx line is not connected. In that case, set dev->irq to IRQ_NOTCONNECTED so request_irq() will fail gracefully with -ENOTCONN. We found this problem on a system where Secure Boot firmware assigned Interrupt Line 255 to an i801_smbus device and another device was already using MSI-X IRQ 255. This was in v3.10, where i801_probe() fails if request_irq() fails: i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143) i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C i801_smbus 0000:00:1f.3: PCI INT C: no GSI genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa) CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1 Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5 Call Trace: dump_stack+0x19/0x1b __setup_irq+0x54a/0x570 request_threaded_irq+0xcc/0x170 i801_probe+0x32f/0x508 [i2c_i801] local_pci_probe+0x45/0xa0 i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16 i801_smbus: probe of 0000:00:1f.3 failed with error -16 After aeb8a3d16ae0 ("i2c: i801: Check if interrupts are disabled"), i801_probe() will fall back to polling if request_irq() fails. But we still need this patch because request_irq() may succeed or fail depending on other devices in the system. If request_irq() fails, i801_smbus will work by falling back to polling, but if it succeeds, i801_smbus won't work because it expects interrupts that it may not receive. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-15 05:52:01 +01:00
#include <linux/interrupt.h>
#define PREFIX "ACPI: "
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_irq");
struct acpi_prt_entry {
struct acpi_pci_id id;
u8 pin;
acpi_handle link;
u32 index; /* GSI, or link _CRS index */
};
static inline char pin_name(int pin)
{
return 'A' + pin - 1;
}
/* --------------------------------------------------------------------------
PCI IRQ Routing Table (PRT) Support
-------------------------------------------------------------------------- */
/* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */
static const struct dmi_system_id medion_md9580[] = {
{
.ident = "Medion MD9580-F laptop",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
DMI_MATCH(DMI_PRODUCT_NAME, "A555"),
},
},
{ }
};
/* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */
static const struct dmi_system_id dell_optiplex[] = {
{
.ident = "Dell Optiplex GX1",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"),
},
},
{ }
};
/* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */
static const struct dmi_system_id hp_t5710[] = {
{
.ident = "HP t5710",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"),
DMI_MATCH(DMI_BOARD_NAME, "098Ch"),
},
},
{ }
};
struct prt_quirk {
const struct dmi_system_id *system;
unsigned int segment;
unsigned int bus;
unsigned int device;
unsigned char pin;
const char *source; /* according to BIOS */
const char *actual_source;
};
#define PCI_INTX_PIN(c) (c - 'A' + 1)
/*
* These systems have incorrect _PRT entries. The BIOS claims the PCI
* interrupt at the listed segment/bus/device/pin is connected to the first
* link device, but it is actually connected to the second.
*/
static const struct prt_quirk prt_quirks[] = {
{ medion_md9580, 0, 0, 9, PCI_INTX_PIN('A'),
"\\_SB_.PCI0.ISA_.LNKA",
"\\_SB_.PCI0.ISA_.LNKB"},
{ dell_optiplex, 0, 0, 0xd, PCI_INTX_PIN('A'),
"\\_SB_.LNKB",
"\\_SB_.LNKA"},
{ hp_t5710, 0, 0, 1, PCI_INTX_PIN('A'),
"\\_SB_.PCI0.LNK1",
"\\_SB_.PCI0.LNK3"},
};
static void do_prt_fixups(struct acpi_prt_entry *entry,
struct acpi_pci_routing_table *prt)
{
int i;
const struct prt_quirk *quirk;
for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) {
quirk = &prt_quirks[i];
/* All current quirks involve link devices, not GSIs */
if (dmi_check_system(quirk->system) &&
entry->id.segment == quirk->segment &&
entry->id.bus == quirk->bus &&
entry->id.device == quirk->device &&
entry->pin == quirk->pin &&
!strcmp(prt->source, quirk->source) &&
strlen(prt->source) >= strlen(quirk->actual_source)) {
printk(KERN_WARNING PREFIX "firmware reports "
"%04x:%02x:%02x PCI INT %c connected to %s; "
"changing to %s\n",
entry->id.segment, entry->id.bus,
entry->id.device, pin_name(entry->pin),
prt->source, quirk->actual_source);
strcpy(prt->source, quirk->actual_source);
}
}
}
static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev,
int pin, struct acpi_pci_routing_table *prt,
struct acpi_prt_entry **entry_ptr)
{
int segment = pci_domain_nr(dev->bus);
int bus = dev->bus->number;
int device = pci_ari_enabled(dev->bus) ? 0 : PCI_SLOT(dev->devfn);
struct acpi_prt_entry *entry;
if (((prt->address >> 16) & 0xffff) != device ||
prt->pin + 1 != pin)
return -ENODEV;
entry = kzalloc(sizeof(struct acpi_prt_entry), GFP_KERNEL);
if (!entry)
return -ENOMEM;
/*
* Note that the _PRT uses 0=INTA, 1=INTB, etc, while PCI uses
* 1=INTA, 2=INTB. We use the PCI encoding throughout, so convert
* it here.
*/
entry->id.segment = segment;
entry->id.bus = bus;
entry->id.device = (prt->address >> 16) & 0xFFFF;
entry->pin = prt->pin + 1;
do_prt_fixups(entry, prt);
entry->index = prt->source_index;
/*
* Type 1: Dynamic
* ---------------
* The 'source' field specifies the PCI interrupt link device used to
* configure the IRQ assigned to this slot|dev|pin. The 'source_index'
* indicates which resource descriptor in the resource template (of
* the link device) this interrupt is allocated from.
*
* NOTE: Don't query the Link Device for IRQ information at this time
* because Link Device enumeration may not have occurred yet
* (e.g. exists somewhere 'below' this _PRT entry in the ACPI
* namespace).
*/
if (prt->source[0])
acpi_get_handle(handle, prt->source, &entry->link);
/*
* Type 2: Static
* --------------
* The 'source' field is NULL, and the 'source_index' field specifies
* the IRQ value, which is hardwired to specific interrupt inputs on
* the interrupt controller.
*/
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO,
" %04x:%02x:%02x[%c] -> %s[%d]\n",
entry->id.segment, entry->id.bus,
entry->id.device, pin_name(entry->pin),
prt->source, entry->index));
*entry_ptr = entry;
return 0;
}
static int acpi_pci_irq_find_prt_entry(struct pci_dev *dev,
int pin, struct acpi_prt_entry **entry_ptr)
{
acpi_status status;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_pci_routing_table *entry;
acpi_handle handle = NULL;
if (dev->bus->bridge)
handle = ACPI_HANDLE(dev->bus->bridge);
if (!handle)
return -ENODEV;
/* 'handle' is the _PRT's parent (root bridge or PCI-PCI bridge) */
status = acpi_get_irq_routing_table(handle, &buffer);
if (ACPI_FAILURE(status)) {
kfree(buffer.pointer);
return -ENODEV;
}
entry = buffer.pointer;
while (entry && (entry->length > 0)) {
if (!acpi_pci_irq_check_entry(handle, dev, pin,
entry, entry_ptr))
break;
entry = (struct acpi_pci_routing_table *)
((unsigned long)entry + entry->length);
}
kfree(buffer.pointer);
return 0;
}
/* --------------------------------------------------------------------------
PCI Interrupt Routing Support
-------------------------------------------------------------------------- */
ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS The following was observed by Steve Rostedt on 3.0.0-rc5 Backtrace: irq 16: nobody cared (try booting with the "irqpoll" option) Pid: 65, comm: irq/16-uhci_hcd Not tainted 3.0.0-rc5-test+ #94 Call Trace: [<ffffffff810aa643>] __report_bad_irq+0x37/0xc1 [<ffffffff810aaa2d>] note_interrupt+0x14e/0x1c9 [<ffffffff810a9a05>] ? irq_thread_fn+0x3c/0x3c [<ffffffff810a990e>] irq_thread+0xf6/0x1b1 [<ffffffff810a9818>] ? irq_finalize_oneshot+0xb3/0xb3 [<ffffffff8106b4d6>] kthread+0x9f/0xa7 [<ffffffff814f1f04>] kernel_thread_helper+0x4/0x10 [<ffffffff8103ca09>] ? finish_task_switch+0x7b/0xc0 [<ffffffff814eac78>] ? retint_restore_args+0x13/0x13 [<ffffffff8106b437>] ? __init_kthread_worker+0x5a/0x5a [<ffffffff814f1f00>] ? gs_change+0x13/0x13 handlers: [<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq [<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq Disabling IRQ #16 The problem being that a device triggers boot interrupts (due to threaded interrupt handling and masking of the IO-APIC), which are forwarded to the PIRQ line of the device. These interrupts are not handled on the PIRQ line because the interrupt handler is not present there. This should have already been fixed by CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS. However some parts of the quirk got lost in the ACPI merge. This is a resent of the patch proposed in 2009. See http://lkml.org/lkml/2009/9/7/192 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-15 14:52:30 +02:00
#ifdef CONFIG_X86_IO_APIC
extern int noioapicquirk;
extern int noioapicreroute;
static int bridge_has_boot_interrupt_variant(struct pci_bus *bus)
{
struct pci_bus *bus_it;
for (bus_it = bus ; bus_it ; bus_it = bus_it->parent) {
if (!bus_it->self)
return 0;
if (bus_it->self->irq_reroute_variant)
return bus_it->self->irq_reroute_variant;
}
return 0;
}
/*
* Some chipsets (e.g. Intel 6700PXH) generate a legacy INTx when the IRQ
* entry in the chipset's IO-APIC is masked (as, e.g. the RT kernel does
* during interrupt handling). When this INTx generation cannot be disabled,
* we reroute these interrupts to their legacy equivalent to get rid of
* spurious interrupts.
*/
static int acpi_reroute_boot_interrupt(struct pci_dev *dev,
struct acpi_prt_entry *entry)
{
if (noioapicquirk || noioapicreroute) {
return 0;
} else {
switch (bridge_has_boot_interrupt_variant(dev->bus)) {
case 0:
/* no rerouting necessary */
return 0;
case INTEL_IRQ_REROUTE_VARIANT:
/*
* Remap according to INTx routing table in 6700PXH
* specs, intel order number 302628-002, section
* 2.15.2. Other chipsets (80332, ...) have the same
* mapping and are handled here as well.
*/
dev_info(&dev->dev, "PCI IRQ %d -> rerouted to legacy "
"IRQ %d\n", entry->index,
(entry->index % 4) + 16);
entry->index = (entry->index % 4) + 16;
return 1;
default:
dev_warn(&dev->dev, "Cannot reroute IRQ %d to legacy "
"IRQ: unknown mapping\n", entry->index);
return -1;
}
}
}
#endif /* CONFIG_X86_IO_APIC */
static struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
{
struct acpi_prt_entry *entry = NULL;
struct pci_dev *bridge;
u8 bridge_pin, orig_pin = pin;
int ret;
ret = acpi_pci_irq_find_prt_entry(dev, pin, &entry);
if (!ret && entry) {
ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS The following was observed by Steve Rostedt on 3.0.0-rc5 Backtrace: irq 16: nobody cared (try booting with the "irqpoll" option) Pid: 65, comm: irq/16-uhci_hcd Not tainted 3.0.0-rc5-test+ #94 Call Trace: [<ffffffff810aa643>] __report_bad_irq+0x37/0xc1 [<ffffffff810aaa2d>] note_interrupt+0x14e/0x1c9 [<ffffffff810a9a05>] ? irq_thread_fn+0x3c/0x3c [<ffffffff810a990e>] irq_thread+0xf6/0x1b1 [<ffffffff810a9818>] ? irq_finalize_oneshot+0xb3/0xb3 [<ffffffff8106b4d6>] kthread+0x9f/0xa7 [<ffffffff814f1f04>] kernel_thread_helper+0x4/0x10 [<ffffffff8103ca09>] ? finish_task_switch+0x7b/0xc0 [<ffffffff814eac78>] ? retint_restore_args+0x13/0x13 [<ffffffff8106b437>] ? __init_kthread_worker+0x5a/0x5a [<ffffffff814f1f00>] ? gs_change+0x13/0x13 handlers: [<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq [<ffffffff810a912d>] irq_default_primary_handler threaded [<ffffffff8135eaa6>] usb_hcd_irq Disabling IRQ #16 The problem being that a device triggers boot interrupts (due to threaded interrupt handling and masking of the IO-APIC), which are forwarded to the PIRQ line of the device. These interrupts are not handled on the PIRQ line because the interrupt handler is not present there. This should have already been fixed by CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS. However some parts of the quirk got lost in the ACPI merge. This is a resent of the patch proposed in 2009. See http://lkml.org/lkml/2009/9/7/192 Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-15 14:52:30 +02:00
#ifdef CONFIG_X86_IO_APIC
acpi_reroute_boot_interrupt(dev, entry);
#endif /* CONFIG_X86_IO_APIC */
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %s[%c] _PRT entry\n",
pci_name(dev), pin_name(pin)));
return entry;
}
/*
* Attempt to derive an IRQ for this device from a parent bridge's
* PCI interrupt routing entry (eg. yenta bridge and add-in card bridge).
*/
bridge = dev->bus->self;
while (bridge) {
pin = pci_swizzle_interrupt_pin(dev, pin);
if ((bridge->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) {
/* PC card has the same IRQ as its cardbridge */
bridge_pin = bridge->pin;
if (!bridge_pin) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No interrupt pin configured for device %s\n",
pci_name(bridge)));
return NULL;
}
pin = bridge_pin;
}
ret = acpi_pci_irq_find_prt_entry(bridge, pin, &entry);
if (!ret && entry) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Derived GSI for %s INT %c from %s\n",
pci_name(dev), pin_name(orig_pin),
pci_name(bridge)));
return entry;
}
dev = bridge;
bridge = dev->bus->self;
}
dev_warn(&dev->dev, "can't derive routing for PCI INT %c\n",
pin_name(orig_pin));
return NULL;
}
#if IS_ENABLED(CONFIG_ISA) || IS_ENABLED(CONFIG_EISA)
static int acpi_isa_register_gsi(struct pci_dev *dev)
{
u32 dev_gsi;
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF) &&
acpi_isa_irq_available(dev->irq) &&
(acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
pin_name(dev->pin), dev->irq);
acpi_register_gsi(&dev->dev, dev_gsi,
ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
return 0;
}
return -EINVAL;
}
#else
static inline int acpi_isa_register_gsi(struct pci_dev *dev)
{
return -ENODEV;
}
#endif
x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected" Per the x86-specific footnote to PCI spec r3.0, sec 6.2.4, the value 255 in the Interrupt Line register means "unknown" or "no connection." Previously, when we couldn't derive an IRQ from the _PRT, we fell back to using the value from Interrupt Line as an IRQ. It's questionable whether we should do that at all, but the spec clearly suggests we shouldn't do it for the value 255 on x86. Calling request_irq() with IRQ 255 may succeed, but the driver won't receive any interrupts. Or, if IRQ 255 is shared with another device, it may succeed, and the driver's ISR will be called at random times when the *other* device interrupts. Or it may fail if another device is using IRQ 255 with incompatible flags. What we *want* is for request_irq() to fail predictably so the driver can fall back to polling. On x86, assume 255 in the Interrupt Line means the INTx line is not connected. In that case, set dev->irq to IRQ_NOTCONNECTED so request_irq() will fail gracefully with -ENOTCONN. We found this problem on a system where Secure Boot firmware assigned Interrupt Line 255 to an i801_smbus device and another device was already using MSI-X IRQ 255. This was in v3.10, where i801_probe() fails if request_irq() fails: i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143) i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C i801_smbus 0000:00:1f.3: PCI INT C: no GSI genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa) CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1 Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5 Call Trace: dump_stack+0x19/0x1b __setup_irq+0x54a/0x570 request_threaded_irq+0xcc/0x170 i801_probe+0x32f/0x508 [i2c_i801] local_pci_probe+0x45/0xa0 i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16 i801_smbus: probe of 0000:00:1f.3 failed with error -16 After aeb8a3d16ae0 ("i2c: i801: Check if interrupts are disabled"), i801_probe() will fall back to polling if request_irq() fails. But we still need this patch because request_irq() may succeed or fail depending on other devices in the system. If request_irq() fails, i801_smbus will work by falling back to polling, but if it succeeds, i801_smbus won't work because it expects interrupts that it may not receive. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-15 05:52:01 +01:00
static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin)
{
#ifdef CONFIG_X86
/*
* On x86 irq line 0xff means "unknown" or "no connection"
* (PCI 3.0, Section 6.2.4, footnote on page 223).
*/
if (dev->irq == 0xff) {
dev->irq = IRQ_NOTCONNECTED;
dev_warn(&dev->dev, "PCI INT %c: not connected\n",
pin_name(pin));
return false;
}
#endif
return true;
}
int acpi_pci_irq_enable(struct pci_dev *dev)
{
struct acpi_prt_entry *entry;
int gsi;
u8 pin;
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-10-01 01:03:00 +02:00
int triggering = ACPI_LEVEL_SENSITIVE;
ACPI / PCI: fix GIC irq model default PCI IRQ polarity On ACPI ARM based systems the GIC interrupt controller and corresponding interrupt model permit only the high polarity for level interrupts. ACPI firmware describes PCI legacy IRQs through entries in the _PRT objects. Entries in the _PRT can be of two types: - Static: not configurable, trigger/polarity default to level-low, _PRT entry defines the global GSI interrupt number - Configurable: _PRT interrupt entry contains a reference to the corresponding PCI interrupt link device (that in turn provides the interrupt descriptor through its _CRS/_PRS methods) Configurable IRQ entries are not currently allowed by the ACPI specification on ARM since they can only be used for interrupt pins that are routable, as per ACPI specifications (version 6.1, 6.2.13): "[...] There are two ways that _PRT can be used. Typically, the interrupt input that a given PCI interrupt is on is configurable. For example, a given PCI interrupt might be configured for either IRQ 10 or 11 on an 8259 interrupt controller. In this model, each interrupt is represented in the ACPI namespace as a PCI Interrupt Link Device. [...]" ARM platforms GIC configurations do not allow dynamic IRQ routing, since routing is statically laid out at synthesis time; therefore PCI interrupt links cannot be used for PCI legacy IRQ descriptions in the _PRT on ARM systems. On the other hand, current core ACPI code handling PCI legacy IRQs consider IRQ trigger/polarity for static _PRT entries as level-low. On ARM systems with a GIC interrupt controller and corresponding ACPI interrupt model this does not work in that GIC interrupt controller is only capable of handling level interrupts whose polarity is high (for PCI legacy IRQs - that are level-low by specification - this means that the legacy IRQs are inverted before reaching the interrupt controller pin), resulting in IRQ allocation failures such as: genirq: Setting trigger mode 8 for irq 18 failed (gic_set_type+0x0/0x48) Change the default polarity for PCI legacy IRQs to high on systems booting wth ACPI on platforms with a GIC interrupt controller model, fixing the discrepancy between specification and HW behaviour. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Duc Dang <dhdang@apm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-05 16:12:38 +02:00
/*
* On ARM systems with the GIC interrupt model, level interrupts
* are always polarity high by specification; PCI legacy
* IRQs lines are inverted before reaching the interrupt
* controller and must therefore be considered active high
* as default.
*/
int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ?
ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW;
char *link = NULL;
char link_desc[16];
int rc;
pin = dev->pin;
if (!pin) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No interrupt pin configured for device %s\n",
pci_name(dev)));
return 0;
}
if (dev->irq_managed && dev->irq > 0)
x86, irq: Keep balance of IOAPIC pin reference count To keep balance of IOAPIC pin reference count, we need to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. There are two cases which will cause reentrance. The first case is caused by suspend/hibernation. If pcibios_disable_irq is called during suspending/hibernating, we don't release the assigned IRQ number, otherwise it may break the suspend/hibernation. So late when pcibios_enable_irq is called during resume, we shouldn't allocate IRQ number again. The second case is that function acpi_pci_irq_enable() may be called twice for PCI devices present at boot time as below: 1) pci_acpi_init() --> acpi_pci_irq_enable() if pci_routeirq is true 2) pci_enable_device() --> pcibios_enable_device() --> acpi_pci_irq_enable() We can't kill kernel parameter pci_routeirq yet because it's still needed for debugging purpose. So flag irq_managed is introduced to track whether IRQ number is assigned by OS and to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-13-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-27 06:21:42 +01:00
return 0;
entry = acpi_pci_irq_lookup(dev, pin);
if (!entry) {
/*
* IDE legacy mode controller IRQs are magic. Why do compat
* extensions always make such a nasty mess.
*/
if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
(dev->class & 0x05) == 0)
return 0;
}
if (entry) {
if (entry->link)
gsi = acpi_pci_link_allocate_irq(entry->link,
entry->index,
&triggering, &polarity,
&link);
else
gsi = entry->index;
} else
gsi = -1;
if (gsi < 0) {
x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected" Per the x86-specific footnote to PCI spec r3.0, sec 6.2.4, the value 255 in the Interrupt Line register means "unknown" or "no connection." Previously, when we couldn't derive an IRQ from the _PRT, we fell back to using the value from Interrupt Line as an IRQ. It's questionable whether we should do that at all, but the spec clearly suggests we shouldn't do it for the value 255 on x86. Calling request_irq() with IRQ 255 may succeed, but the driver won't receive any interrupts. Or, if IRQ 255 is shared with another device, it may succeed, and the driver's ISR will be called at random times when the *other* device interrupts. Or it may fail if another device is using IRQ 255 with incompatible flags. What we *want* is for request_irq() to fail predictably so the driver can fall back to polling. On x86, assume 255 in the Interrupt Line means the INTx line is not connected. In that case, set dev->irq to IRQ_NOTCONNECTED so request_irq() will fail gracefully with -ENOTCONN. We found this problem on a system where Secure Boot firmware assigned Interrupt Line 255 to an i801_smbus device and another device was already using MSI-X IRQ 255. This was in v3.10, where i801_probe() fails if request_irq() fails: i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143) i801_smbus 0000:00:1f.3: can't derive routing for PCI INT C i801_smbus 0000:00:1f.3: PCI INT C: no GSI genirq: Flags mismatch irq 255. 00000080 (i801_smbus) vs. 00000000 (megasa) CPU: 0 PID: 2487 Comm: kworker/0:1 Not tainted 3.10.0-229.el7.x86_64 #1 Hardware name: FUJITSU PRIMEQUEST 2800E2/D3736, BIOS PRIMEQUEST 2000 Serie5 Call Trace: dump_stack+0x19/0x1b __setup_irq+0x54a/0x570 request_threaded_irq+0xcc/0x170 i801_probe+0x32f/0x508 [i2c_i801] local_pci_probe+0x45/0xa0 i801_smbus 0000:00:1f.3: Failed to allocate irq 255: -16 i801_smbus: probe of 0000:00:1f.3 failed with error -16 After aeb8a3d16ae0 ("i2c: i801: Check if interrupts are disabled"), i801_probe() will fall back to polling if request_irq() fails. But we still need this patch because request_irq() may succeed or fail depending on other devices in the system. If request_irq() fails, i801_smbus will work by falling back to polling, but if it succeeds, i801_smbus won't work because it expects interrupts that it may not receive. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-15 05:52:01 +01:00
/*
* No IRQ known to the ACPI subsystem - maybe the BIOS /
* driver reported one, then use it. Exit in any case.
*/
if (!acpi_pci_irq_valid(dev, pin))
return 0;
if (acpi_isa_register_gsi(dev))
dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
pin_name(pin));
kfree(entry);
return 0;
}
rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
if (rc < 0) {
dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
pin_name(pin));
kfree(entry);
return rc;
}
dev->irq = rc;
dev->irq_managed = 1;
if (link)
snprintf(link_desc, sizeof(link_desc), " -> Link[%s]", link);
else
link_desc[0] = '\0';
dev_dbg(&dev->dev, "PCI INT %c%s -> GSI %u (%s, %s) -> IRQ %d\n",
pin_name(pin), link_desc, gsi,
(triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge",
(polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq);
kfree(entry);
return 0;
}
void acpi_pci_irq_disable(struct pci_dev *dev)
{
struct acpi_prt_entry *entry;
int gsi;
u8 pin;
pin = dev->pin;
if (!pin || !dev->irq_managed || dev->irq <= 0)
return;
/* Keep IOAPIC pin configuration when suspending */
if (dev->dev.power.is_prepared)
return;
#ifdef CONFIG_PM
if (dev->dev.power.runtime_status == RPM_SUSPENDING)
return;
#endif
entry = acpi_pci_irq_lookup(dev, pin);
if (!entry)
return;
if (entry->link)
gsi = acpi_pci_link_free_irq(entry->link);
else
gsi = entry->index;
kfree(entry);
/*
* TBD: It might be worth clearing dev->irq by magic constant
* (e.g. PCI_UNDEFINED_IRQ).
*/
dev_dbg(&dev->dev, "PCI INT %c disabled\n", pin_name(pin));
x86, irq: Keep balance of IOAPIC pin reference count To keep balance of IOAPIC pin reference count, we need to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. There are two cases which will cause reentrance. The first case is caused by suspend/hibernation. If pcibios_disable_irq is called during suspending/hibernating, we don't release the assigned IRQ number, otherwise it may break the suspend/hibernation. So late when pcibios_enable_irq is called during resume, we shouldn't allocate IRQ number again. The second case is that function acpi_pci_irq_enable() may be called twice for PCI devices present at boot time as below: 1) pci_acpi_init() --> acpi_pci_irq_enable() if pci_routeirq is true 2) pci_enable_device() --> pcibios_enable_device() --> acpi_pci_irq_enable() We can't kill kernel parameter pci_routeirq yet because it's still needed for debugging purpose. So flag irq_managed is introduced to track whether IRQ number is assigned by OS and to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-13-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-27 06:21:42 +01:00
if (gsi >= 0) {
acpi_unregister_gsi(gsi);
dev->irq_managed = 0;
x86, irq: Keep balance of IOAPIC pin reference count To keep balance of IOAPIC pin reference count, we need to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. There are two cases which will cause reentrance. The first case is caused by suspend/hibernation. If pcibios_disable_irq is called during suspending/hibernating, we don't release the assigned IRQ number, otherwise it may break the suspend/hibernation. So late when pcibios_enable_irq is called during resume, we shouldn't allocate IRQ number again. The second case is that function acpi_pci_irq_enable() may be called twice for PCI devices present at boot time as below: 1) pci_acpi_init() --> acpi_pci_irq_enable() if pci_routeirq is true 2) pci_enable_device() --> pcibios_enable_device() --> acpi_pci_irq_enable() We can't kill kernel parameter pci_routeirq yet because it's still needed for debugging purpose. So flag irq_managed is introduced to track whether IRQ number is assigned by OS and to protect pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable() from reentrance. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <lenb@kernel.org> Link: http://lkml.kernel.org/r/1414387308-27148-13-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-10-27 06:21:42 +01:00
}
}