linux/drivers/mfd/as3722.c

482 lines
13 KiB
C
Raw Normal View History

/*
* Core driver for ams AS3722 PMICs
*
* Copyright (C) 2013 AMS AG
* Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
*
* Author: Florian Lobmaier <florian.lobmaier@ams.com>
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/mfd/as3722.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#define AS3722_DEVICE_ID 0x0C
static const struct resource as3722_rtc_resource[] = {
{
.name = "as3722-rtc-alarm",
.start = AS3722_IRQ_RTC_ALARM,
.end = AS3722_IRQ_RTC_ALARM,
.flags = IORESOURCE_IRQ,
},
};
static const struct resource as3722_adc_resource[] = {
{
.name = "as3722-adc",
.start = AS3722_IRQ_ADC,
.end = AS3722_IRQ_ADC,
.flags = IORESOURCE_IRQ,
},
};
static const struct mfd_cell as3722_devs[] = {
{
.name = "as3722-pinctrl",
},
{
.name = "as3722-regulator",
},
{
.name = "as3722-rtc",
.num_resources = ARRAY_SIZE(as3722_rtc_resource),
.resources = as3722_rtc_resource,
},
{
.name = "as3722-adc",
.num_resources = ARRAY_SIZE(as3722_adc_resource),
.resources = as3722_adc_resource,
},
{
.name = "as3722-power-off",
},
{
.name = "as3722-wdt",
},
};
static const struct regmap_irq as3722_irqs[] = {
/* INT1 IRQs */
[AS3722_IRQ_LID] = {
.mask = AS3722_INTERRUPT_MASK1_LID,
},
[AS3722_IRQ_ACOK] = {
.mask = AS3722_INTERRUPT_MASK1_ACOK,
},
[AS3722_IRQ_ENABLE1] = {
.mask = AS3722_INTERRUPT_MASK1_ENABLE1,
},
[AS3722_IRQ_OCCUR_ALARM_SD0] = {
.mask = AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0,
},
[AS3722_IRQ_ONKEY_LONG_PRESS] = {
.mask = AS3722_INTERRUPT_MASK1_ONKEY_LONG,
},
[AS3722_IRQ_ONKEY] = {
.mask = AS3722_INTERRUPT_MASK1_ONKEY,
},
[AS3722_IRQ_OVTMP] = {
.mask = AS3722_INTERRUPT_MASK1_OVTMP,
},
[AS3722_IRQ_LOWBAT] = {
.mask = AS3722_INTERRUPT_MASK1_LOWBAT,
},
/* INT2 IRQs */
[AS3722_IRQ_SD0_LV] = {
.mask = AS3722_INTERRUPT_MASK2_SD0_LV,
.reg_offset = 1,
},
[AS3722_IRQ_SD1_LV] = {
.mask = AS3722_INTERRUPT_MASK2_SD1_LV,
.reg_offset = 1,
},
[AS3722_IRQ_SD2_LV] = {
.mask = AS3722_INTERRUPT_MASK2_SD2345_LV,
.reg_offset = 1,
},
[AS3722_IRQ_PWM1_OV_PROT] = {
.mask = AS3722_INTERRUPT_MASK2_PWM1_OV_PROT,
.reg_offset = 1,
},
[AS3722_IRQ_PWM2_OV_PROT] = {
.mask = AS3722_INTERRUPT_MASK2_PWM2_OV_PROT,
.reg_offset = 1,
},
[AS3722_IRQ_ENABLE2] = {
.mask = AS3722_INTERRUPT_MASK2_ENABLE2,
.reg_offset = 1,
},
[AS3722_IRQ_SD6_LV] = {
.mask = AS3722_INTERRUPT_MASK2_SD6_LV,
.reg_offset = 1,
},
[AS3722_IRQ_RTC_REP] = {
.mask = AS3722_INTERRUPT_MASK2_RTC_REP,
.reg_offset = 1,
},
/* INT3 IRQs */
[AS3722_IRQ_RTC_ALARM] = {
.mask = AS3722_INTERRUPT_MASK3_RTC_ALARM,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO1] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO1,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO2] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO2,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO3] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO3,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO4] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO4,
.reg_offset = 2,
},
[AS3722_IRQ_GPIO5] = {
.mask = AS3722_INTERRUPT_MASK3_GPIO5,
.reg_offset = 2,
},
[AS3722_IRQ_WATCHDOG] = {
.mask = AS3722_INTERRUPT_MASK3_WATCHDOG,
.reg_offset = 2,
},
[AS3722_IRQ_ENABLE3] = {
.mask = AS3722_INTERRUPT_MASK3_ENABLE3,
.reg_offset = 2,
},
/* INT4 IRQs */
[AS3722_IRQ_TEMP_SD0_SHUTDOWN] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD1_SHUTDOWN] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD2_SHUTDOWN] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD0_ALARM] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD1_ALARM] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM,
.reg_offset = 3,
},
[AS3722_IRQ_TEMP_SD6_ALARM] = {
.mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM,
.reg_offset = 3,
},
[AS3722_IRQ_OCCUR_ALARM_SD6] = {
.mask = AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6,
.reg_offset = 3,
},
[AS3722_IRQ_ADC] = {
.mask = AS3722_INTERRUPT_MASK4_ADC,
.reg_offset = 3,
},
};
static const struct regmap_irq_chip as3722_irq_chip = {
.name = "as3722",
.irqs = as3722_irqs,
.num_irqs = ARRAY_SIZE(as3722_irqs),
.num_regs = 4,
.status_base = AS3722_INTERRUPT_STATUS1_REG,
.mask_base = AS3722_INTERRUPT_MASK1_REG,
};
static int as3722_check_device_id(struct as3722 *as3722)
{
u32 val;
int ret;
/* Check that this is actually a AS3722 */
ret = as3722_read(as3722, AS3722_ASIC_ID1_REG, &val);
if (ret < 0) {
dev_err(as3722->dev, "ASIC_ID1 read failed: %d\n", ret);
return ret;
}
if (val != AS3722_DEVICE_ID) {
dev_err(as3722->dev, "Device is not AS3722, ID is 0x%x\n", val);
return -ENODEV;
}
ret = as3722_read(as3722, AS3722_ASIC_ID2_REG, &val);
if (ret < 0) {
dev_err(as3722->dev, "ASIC_ID2 read failed: %d\n", ret);
return ret;
}
dev_info(as3722->dev, "AS3722 with revision 0x%x found\n", val);
return 0;
}
static int as3722_configure_pullups(struct as3722 *as3722)
{
int ret;
u32 val = 0;
if (as3722->en_intern_int_pullup)
val |= AS3722_INT_PULL_UP;
if (as3722->en_intern_i2c_pullup)
val |= AS3722_I2C_PULL_UP;
ret = as3722_update_bits(as3722, AS3722_IOVOLTAGE_REG,
AS3722_INT_PULL_UP | AS3722_I2C_PULL_UP, val);
if (ret < 0)
dev_err(as3722->dev, "IOVOLTAGE_REG update failed: %d\n", ret);
return ret;
}
static const struct regmap_range as3722_readable_ranges[] = {
regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_REG_SEQU_MOD3_REG),
regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
regmap_reg_range(AS3722_RTC_ACCESS_REG, AS3722_RTC_ACCESS_REG),
regmap_reg_range(AS3722_RTC_STATUS_REG, AS3722_TEMP_STATUS_REG),
regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG),
regmap_reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG),
regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
regmap_reg_range(AS3722_FUSE7_REG, AS3722_FUSE7_REG),
};
static const struct regmap_access_table as3722_readable_table = {
.yes_ranges = as3722_readable_ranges,
.n_yes_ranges = ARRAY_SIZE(as3722_readable_ranges),
};
static const struct regmap_range as3722_writable_ranges[] = {
regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_GPIO_SIGNAL_OUT_REG),
regmap_reg_range(AS3722_REG_SEQU_MOD1_REG, AS3722_REG_SEQU_MOD3_REG),
regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
regmap_reg_range(AS3722_INTERRUPT_MASK1_REG, AS3722_TEMP_STATUS_REG),
regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC1_CONTROL_REG),
regmap_reg_range(AS3722_ADC1_THRESHOLD_HI_MSB_REG,
AS3722_ADC_CONFIGURATION_REG),
regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
};
static const struct regmap_access_table as3722_writable_table = {
.yes_ranges = as3722_writable_ranges,
.n_yes_ranges = ARRAY_SIZE(as3722_writable_ranges),
};
static const struct regmap_range as3722_cacheable_ranges[] = {
regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_LDO11_VOLTAGE_REG),
regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_LDOCONTROL1_REG),
};
static const struct regmap_access_table as3722_volatile_table = {
.no_ranges = as3722_cacheable_ranges,
.n_no_ranges = ARRAY_SIZE(as3722_cacheable_ranges),
};
static const struct regmap_config as3722_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = AS3722_MAX_REGISTER,
.cache_type = REGCACHE_RBTREE,
.rd_table = &as3722_readable_table,
.wr_table = &as3722_writable_table,
.volatile_table = &as3722_volatile_table,
};
static int as3722_i2c_of_probe(struct i2c_client *i2c,
struct as3722 *as3722)
{
struct device_node *np = i2c->dev.of_node;
struct irq_data *irq_data;
if (!np) {
dev_err(&i2c->dev, "Device Tree not found\n");
return -EINVAL;
}
irq_data = irq_get_irq_data(i2c->irq);
if (!irq_data) {
dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
return -EINVAL;
}
as3722->en_intern_int_pullup = of_property_read_bool(np,
"ams,enable-internal-int-pullup");
as3722->en_intern_i2c_pullup = of_property_read_bool(np,
"ams,enable-internal-i2c-pullup");
as3722->en_ac_ok_pwr_on = of_property_read_bool(np,
"ams,enable-ac-ok-power-on");
as3722->irq_flags = irqd_get_trigger_type(irq_data);
dev_dbg(&i2c->dev, "IRQ flags are 0x%08lx\n", as3722->irq_flags);
return 0;
}
static int as3722_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct as3722 *as3722;
unsigned long irq_flags;
int ret;
u8 val = 0;
as3722 = devm_kzalloc(&i2c->dev, sizeof(struct as3722), GFP_KERNEL);
if (!as3722)
return -ENOMEM;
as3722->dev = &i2c->dev;
as3722->chip_irq = i2c->irq;
i2c_set_clientdata(i2c, as3722);
ret = as3722_i2c_of_probe(i2c, as3722);
if (ret < 0)
return ret;
as3722->regmap = devm_regmap_init_i2c(i2c, &as3722_regmap_config);
if (IS_ERR(as3722->regmap)) {
ret = PTR_ERR(as3722->regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
return ret;
}
ret = as3722_check_device_id(as3722);
if (ret < 0)
return ret;
irq_flags = as3722->irq_flags | IRQF_ONESHOT;
ret = devm_regmap_add_irq_chip(as3722->dev, as3722->regmap,
as3722->chip_irq,
irq_flags, -1, &as3722_irq_chip,
&as3722->irq_data);
if (ret < 0) {
dev_err(as3722->dev, "Failed to add regmap irq: %d\n", ret);
return ret;
}
ret = as3722_configure_pullups(as3722);
if (ret < 0)
return ret;
if (as3722->en_ac_ok_pwr_on)
val = AS3722_CTRL_SEQU1_AC_OK_PWR_ON;
ret = as3722_update_bits(as3722, AS3722_CTRL_SEQU1_REG,
AS3722_CTRL_SEQU1_AC_OK_PWR_ON, val);
if (ret < 0) {
dev_err(as3722->dev, "CTRLsequ1 update failed: %d\n", ret);
return ret;
}
ret = devm_mfd_add_devices(&i2c->dev, -1, as3722_devs,
ARRAY_SIZE(as3722_devs), NULL, 0,
regmap_irq_get_domain(as3722->irq_data));
if (ret) {
dev_err(as3722->dev, "Failed to add MFD devices: %d\n", ret);
return ret;
}
mfd: as3722: Handle interrupts on suspend The as3722 device is registered as an irqchip and the as3722-rtc interrupt is one of it's interrupt sources. When using the as3722-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) PM: suspend of devices complete after 161.119 msecs PM: late suspend of devices complete after 1.048 msecs PM: noirq suspend of devices complete after 0.756 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up CPU2 is up CPU3 is up PM: noirq resume of devices complete after 0.487 msecs as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 ... The reason why the as3722 interrupt status cannot be read is because the as3722 interrupt is not masked during suspend and when the as3722-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the as3722 interrupt status. The as3722-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent as3722 interrupt. However, the as3722-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the as3722 must disable it's interrupt instead. Fix this by disabling the as3722 interrupt during suspend. To ensure that a wake-up event from the as3722 is not missing, enable the as3722 interrupt as a wake-up source before disabling the interrupt on entering suspend. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-20 11:51:00 +01:00
device_init_wakeup(as3722->dev, true);
dev_dbg(as3722->dev, "AS3722 core driver initialized successfully\n");
return 0;
}
static int __maybe_unused as3722_i2c_suspend(struct device *dev)
mfd: as3722: Handle interrupts on suspend The as3722 device is registered as an irqchip and the as3722-rtc interrupt is one of it's interrupt sources. When using the as3722-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) PM: suspend of devices complete after 161.119 msecs PM: late suspend of devices complete after 1.048 msecs PM: noirq suspend of devices complete after 0.756 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up CPU2 is up CPU3 is up PM: noirq resume of devices complete after 0.487 msecs as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 ... The reason why the as3722 interrupt status cannot be read is because the as3722 interrupt is not masked during suspend and when the as3722-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the as3722 interrupt status. The as3722-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent as3722 interrupt. However, the as3722-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the as3722 must disable it's interrupt instead. Fix this by disabling the as3722 interrupt during suspend. To ensure that a wake-up event from the as3722 is not missing, enable the as3722 interrupt as a wake-up source before disabling the interrupt on entering suspend. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-20 11:51:00 +01:00
{
struct as3722 *as3722 = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
enable_irq_wake(as3722->chip_irq);
disable_irq(as3722->chip_irq);
return 0;
}
static int __maybe_unused as3722_i2c_resume(struct device *dev)
mfd: as3722: Handle interrupts on suspend The as3722 device is registered as an irqchip and the as3722-rtc interrupt is one of it's interrupt sources. When using the as3722-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) PM: suspend of devices complete after 161.119 msecs PM: late suspend of devices complete after 1.048 msecs PM: noirq suspend of devices complete after 0.756 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up CPU2 is up CPU3 is up PM: noirq resume of devices complete after 0.487 msecs as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 ... The reason why the as3722 interrupt status cannot be read is because the as3722 interrupt is not masked during suspend and when the as3722-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the as3722 interrupt status. The as3722-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent as3722 interrupt. However, the as3722-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the as3722 must disable it's interrupt instead. Fix this by disabling the as3722 interrupt during suspend. To ensure that a wake-up event from the as3722 is not missing, enable the as3722 interrupt as a wake-up source before disabling the interrupt on entering suspend. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-20 11:51:00 +01:00
{
struct as3722 *as3722 = dev_get_drvdata(dev);
enable_irq(as3722->chip_irq);
if (device_may_wakeup(dev))
disable_irq_wake(as3722->chip_irq);
return 0;
}
static const struct of_device_id as3722_of_match[] = {
{ .compatible = "ams,as3722", },
{},
};
MODULE_DEVICE_TABLE(of, as3722_of_match);
static const struct i2c_device_id as3722_i2c_id[] = {
{ "as3722", 0 },
{},
};
MODULE_DEVICE_TABLE(i2c, as3722_i2c_id);
mfd: as3722: Handle interrupts on suspend The as3722 device is registered as an irqchip and the as3722-rtc interrupt is one of it's interrupt sources. When using the as3722-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) PM: suspend of devices complete after 161.119 msecs PM: late suspend of devices complete after 1.048 msecs PM: noirq suspend of devices complete after 0.756 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up CPU2 is up CPU3 is up PM: noirq resume of devices complete after 0.487 msecs as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 ... The reason why the as3722 interrupt status cannot be read is because the as3722 interrupt is not masked during suspend and when the as3722-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the as3722 interrupt status. The as3722-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent as3722 interrupt. However, the as3722-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the as3722 must disable it's interrupt instead. Fix this by disabling the as3722 interrupt during suspend. To ensure that a wake-up event from the as3722 is not missing, enable the as3722 interrupt as a wake-up source before disabling the interrupt on entering suspend. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-20 11:51:00 +01:00
static const struct dev_pm_ops as3722_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(as3722_i2c_suspend, as3722_i2c_resume)
};
static struct i2c_driver as3722_i2c_driver = {
.driver = {
.name = "as3722",
.of_match_table = as3722_of_match,
mfd: as3722: Handle interrupts on suspend The as3722 device is registered as an irqchip and the as3722-rtc interrupt is one of it's interrupt sources. When using the as3722-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) PM: suspend of devices complete after 161.119 msecs PM: late suspend of devices complete after 1.048 msecs PM: noirq suspend of devices complete after 0.756 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up CPU2 is up CPU3 is up PM: noirq resume of devices complete after 0.487 msecs as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 as3722 4-0040: Failed to read IRQ status: -16 ... The reason why the as3722 interrupt status cannot be read is because the as3722 interrupt is not masked during suspend and when the as3722-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the as3722 interrupt status. The as3722-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent as3722 interrupt. However, the as3722-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the as3722 must disable it's interrupt instead. Fix this by disabling the as3722 interrupt during suspend. To ensure that a wake-up event from the as3722 is not missing, enable the as3722 interrupt as a wake-up source before disabling the interrupt on entering suspend. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-11-20 11:51:00 +01:00
.pm = &as3722_pm_ops,
},
.probe = as3722_i2c_probe,
.id_table = as3722_i2c_id,
};
module_i2c_driver(as3722_i2c_driver);
MODULE_DESCRIPTION("I2C support for AS3722 PMICs");
MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@ams.com>");
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
MODULE_LICENSE("GPL");