OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/sh/mm/fault.c

519 lines
11 KiB
C
Raw Normal View History

sh: page table alloc cleanups and page fault optimizations. Cleanup of page table allocators, using generic folded PMD and PUD helpers. TLB flushing operations are moved to a more sensible spot. The page fault handler is also optimized slightly, we no longer waste cycles on IRQ disabling for flushing of the page from the ITLB, since we're already under CLI protection by the initial exception handler. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 08:13:36 +02:00
/*
* Page fault handler for SH with an MMU.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
*
* Copyright (C) 1999 Niibe Yutaka
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
* Copyright (C) 2003 - 2012 Paul Mundt
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
*
* Based on linux/arch/i386/mm/fault.c:
* Copyright (C) 1995 Linus Torvalds
sh: page table alloc cleanups and page fault optimizations. Cleanup of page table allocators, using generic folded PMD and PUD helpers. TLB flushing operations are moved to a more sensible spot. The page fault handler is also optimized slightly, we no longer waste cycles on IRQ disabling for flushing of the page from the ITLB, since we're already under CLI protection by the initial exception handler. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 08:13:36 +02:00
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
*/
#include <linux/kernel.h>
#include <linux/mm.h>
sh: More cosmetic cleanups and trivial fixes. Nothing exciting here, just trivial fixes.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 10:03:56 +02:00
#include <linux/hardirq.h>
#include <linux/kprobes.h>
perf: Do the big rename: Performance Counters -> Performance Events Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 12:02:48 +02:00
#include <linux/perf_event.h>
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
#include <linux/kdebug.h>
sh: trapped io support V2 The idea is that we want to get rid of the in/out/readb/writeb callbacks from the machvec and replace that with simple inline read and write operations to memory. Fast and simple for most hardware devices (think pci). Some devices require special treatment though - like 16-bit only CF devices - so we need to have some method to hook in callbacks. This patch makes it possible to add a per-device trap generating filter. This way we can get maximum performance of sane hardware - which doesn't need this filter - and crappy hardware works but gets punished by a performance hit. V2 changes things around a bit and replaces io access callbacks with a simple minimum_bus_width value. In the future we can add stride as well. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-07 12:18:21 +01:00
#include <asm/io_trapped.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
#include <asm/mmu_context.h>
sh: Revert TLB miss fast-path changes that broke PTEA parts. This ended up causing problems for older parts (particularly ones using PTEA). Revert this for now, it can be added back in once it's had some more testing. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 06:13:10 +01:00
#include <asm/tlbflush.h>
Disintegrate asm/system.h for SH Disintegrate asm/system.h for SH. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-sh@vger.kernel.org
2012-03-28 19:30:03 +02:00
#include <asm/traps.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
sh: Hook up page fault events for software perf counters. This adds page fault instrumentation for the software performance counters. Follows the x86 and powerpc changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-24 19:30:10 +02:00
static inline int notify_page_fault(struct pt_regs *regs, int trap)
{
int ret = 0;
sh: use kprobes_built_in() for notify_page_fault(). Kill off the KPROBES ifdef, as per x86. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 19:50:10 +02:00
if (kprobes_built_in() && !user_mode(regs)) {
sh: Hook up page fault events for software perf counters. This adds page fault instrumentation for the software performance counters. Follows the x86 and powerpc changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-24 19:30:10 +02:00
preempt_disable();
if (kprobe_running() && kprobe_fault_handler(regs, trap))
ret = 1;
preempt_enable();
}
return ret;
}
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
static void
force_sig_info_fault(int si_signo, int si_code, unsigned long address,
struct task_struct *tsk)
{
siginfo_t info;
info.si_signo = si_signo;
info.si_errno = 0;
info.si_code = si_code;
info.si_addr = (void __user *)address;
force_sig_info(si_signo, &info, tsk);
}
sh: Improve oops error reporting In some cases the opps error reporting doesn't give enough information to diagnose the problem, only printing information if it is thought to be valid. Replace the current code with more detailed output. This code is based on the ARM reporting, with minor changes for the SH. [lethal@linux-sh.org: fixed up for 64-bit PTEs and pte_offset_kernel()] Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-19 10:25:03 +02:00
/*
* This is useful to dump out the page tables associated with
* 'addr' in mm 'mm'.
*/
static void show_pte(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
sh: Fix up recursive fault in oops with unset TTB. Presently the oops code looks for the pgd either from the mm context or the cached TTB value. There are presently cases where the TTB can be unset or otherwise cleared by hardware, which we weren't handling, resulting in recursive faults on the NULL pgd. In these cases we can simply reload from swapper_pg_dir and continue on as normal. Cc: stable@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-24 06:15:54 +02:00
if (mm) {
sh: Improve oops error reporting In some cases the opps error reporting doesn't give enough information to diagnose the problem, only printing information if it is thought to be valid. Replace the current code with more detailed output. This code is based on the ARM reporting, with minor changes for the SH. [lethal@linux-sh.org: fixed up for 64-bit PTEs and pte_offset_kernel()] Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-19 10:25:03 +02:00
pgd = mm->pgd;
sh: Fix up recursive fault in oops with unset TTB. Presently the oops code looks for the pgd either from the mm context or the cached TTB value. There are presently cases where the TTB can be unset or otherwise cleared by hardware, which we weren't handling, resulting in recursive faults on the NULL pgd. In these cases we can simply reload from swapper_pg_dir and continue on as normal. Cc: stable@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-24 06:15:54 +02:00
} else {
sh: Improve oops error reporting In some cases the opps error reporting doesn't give enough information to diagnose the problem, only printing information if it is thought to be valid. Replace the current code with more detailed output. This code is based on the ARM reporting, with minor changes for the SH. [lethal@linux-sh.org: fixed up for 64-bit PTEs and pte_offset_kernel()] Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-19 10:25:03 +02:00
pgd = get_TTB();
sh: Fix up recursive fault in oops with unset TTB. Presently the oops code looks for the pgd either from the mm context or the cached TTB value. There are presently cases where the TTB can be unset or otherwise cleared by hardware, which we weren't handling, resulting in recursive faults on the NULL pgd. In these cases we can simply reload from swapper_pg_dir and continue on as normal. Cc: stable@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-07-24 06:15:54 +02:00
if (unlikely(!pgd))
pgd = swapper_pg_dir;
}
sh: Improve oops error reporting In some cases the opps error reporting doesn't give enough information to diagnose the problem, only printing information if it is thought to be valid. Replace the current code with more detailed output. This code is based on the ARM reporting, with minor changes for the SH. [lethal@linux-sh.org: fixed up for 64-bit PTEs and pte_offset_kernel()] Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-19 10:25:03 +02:00
printk(KERN_ALERT "pgd = %p\n", pgd);
pgd += pgd_index(addr);
printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr,
sh: Enable shared page fault handler for _32/_64. This moves the now generic _32 page fault handling code to a shared place and adapts the _64 implementation to make use of it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 08:33:28 +02:00
(u32)(sizeof(*pgd) * 2), (u64)pgd_val(*pgd));
sh: Improve oops error reporting In some cases the opps error reporting doesn't give enough information to diagnose the problem, only printing information if it is thought to be valid. Replace the current code with more detailed output. This code is based on the ARM reporting, with minor changes for the SH. [lethal@linux-sh.org: fixed up for 64-bit PTEs and pte_offset_kernel()] Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-19 10:25:03 +02:00
do {
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
if (pgd_none(*pgd))
break;
if (pgd_bad(*pgd)) {
printk("(bad)");
break;
}
pud = pud_offset(pgd, addr);
if (PTRS_PER_PUD != 1)
sh: Enable shared page fault handler for _32/_64. This moves the now generic _32 page fault handling code to a shared place and adapts the _64 implementation to make use of it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 08:33:28 +02:00
printk(", *pud=%0*Lx", (u32)(sizeof(*pud) * 2),
sh: Improve oops error reporting In some cases the opps error reporting doesn't give enough information to diagnose the problem, only printing information if it is thought to be valid. Replace the current code with more detailed output. This code is based on the ARM reporting, with minor changes for the SH. [lethal@linux-sh.org: fixed up for 64-bit PTEs and pte_offset_kernel()] Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-19 10:25:03 +02:00
(u64)pud_val(*pud));
if (pud_none(*pud))
break;
if (pud_bad(*pud)) {
printk("(bad)");
break;
}
pmd = pmd_offset(pud, addr);
if (PTRS_PER_PMD != 1)
sh: Enable shared page fault handler for _32/_64. This moves the now generic _32 page fault handling code to a shared place and adapts the _64 implementation to make use of it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 08:33:28 +02:00
printk(", *pmd=%0*Lx", (u32)(sizeof(*pmd) * 2),
sh: Improve oops error reporting In some cases the opps error reporting doesn't give enough information to diagnose the problem, only printing information if it is thought to be valid. Replace the current code with more detailed output. This code is based on the ARM reporting, with minor changes for the SH. [lethal@linux-sh.org: fixed up for 64-bit PTEs and pte_offset_kernel()] Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-19 10:25:03 +02:00
(u64)pmd_val(*pmd));
if (pmd_none(*pmd))
break;
if (pmd_bad(*pmd)) {
printk("(bad)");
break;
}
/* We must not map this if we have highmem enabled */
if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
break;
pte = pte_offset_kernel(pmd, addr);
sh: Enable shared page fault handler for _32/_64. This moves the now generic _32 page fault handling code to a shared place and adapts the _64 implementation to make use of it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 08:33:28 +02:00
printk(", *pte=%0*Lx", (u32)(sizeof(*pte) * 2),
(u64)pte_val(*pte));
sh: Improve oops error reporting In some cases the opps error reporting doesn't give enough information to diagnose the problem, only printing information if it is thought to be valid. Replace the current code with more detailed output. This code is based on the ARM reporting, with minor changes for the SH. [lethal@linux-sh.org: fixed up for 64-bit PTEs and pte_offset_kernel()] Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-19 10:25:03 +02:00
} while (0);
printk("\n");
}
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
{
unsigned index = pgd_index(address);
pgd_t *pgd_k;
pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pgd += index;
pgd_k = init_mm.pgd + index;
if (!pgd_present(*pgd_k))
return NULL;
pud = pud_offset(pgd, address);
pud_k = pud_offset(pgd_k, address);
if (!pud_present(*pud_k))
return NULL;
sh: Definitions for 3-level page table layout If using 64-bit PTEs and 4K pages then each page table has 512 entries (as opposed to 1024 entries with 32-bit PTEs). Unlike MIPS, SH follows the convention that all structures in the page table (pgd_t, pmd_t, pgprot_t, etc) must be the same size. Therefore, 64-bit PTEs require 64-bit PGD entries, etc. Using 2-levels of page tables and 64-bit PTEs it is only possible to map 1GB of virtual address space. In order to map all 4GB of virtual address space we need to adopt a 3-level page table layout. This actually works out better for CONFIG_SUPERH32 because we only waste 2 PGD entries on the P1 and P2 areas (which are untranslated) instead of 256. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-13 15:38:50 +01:00
if (!pud_present(*pud))
set_pud(pud, *pud_k);
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
return NULL;
if (!pmd_present(*pmd))
set_pmd(pmd, *pmd_k);
sh: Restore previous behaviour on kernel fault The last commit changed the behaviour on kernel faults when we were doing something other than syncing the page tables. vmalloc_sync_one() needs to return NULL if the page tables are up to date, because the reason for the fault was not a missing/inconsitent page table entry. By returning NULL if the page tables are sync'd we signal to the calling function that further work must be done to resolve this fault. Also, remove the superfluous __va() around the first argument to vmalloc_sync_one(). The value of pgd_k is already a virtual address and using it wth __va() causes a NULL dereference. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-13 13:38:04 +02:00
else {
/*
* The page tables are fully synchronised so there must
* be another reason for the fault. Return NULL here to
* signal that we have not taken care of the fault.
*/
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
sh: Restore previous behaviour on kernel fault The last commit changed the behaviour on kernel faults when we were doing something other than syncing the page tables. vmalloc_sync_one() needs to return NULL if the page tables are up to date, because the reason for the fault was not a missing/inconsitent page table entry. By returning NULL if the page tables are sync'd we signal to the calling function that further work must be done to resolve this fault. Also, remove the superfluous __va() around the first argument to vmalloc_sync_one(). The value of pgd_k is already a virtual address and using it wth __va() causes a NULL dereference. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-13 13:38:04 +02:00
return NULL;
}
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
return pmd_k;
}
sh64: Fix up vmalloc fault range check. With the previous attempt reverted this switches to conditionalizing the end address. Nominally VMALLOC_END, but extended for P3_ADDR_MAX in the store queue case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 13:01:16 +02:00
#ifdef CONFIG_SH_STORE_QUEUES
#define __FAULT_ADDR_LIMIT P3_ADDR_MAX
#else
#define __FAULT_ADDR_LIMIT VMALLOC_END
#endif
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
/*
* Handle a fault on the vmalloc or module mapping area
*/
static noinline int vmalloc_fault(unsigned long address)
{
pgd_t *pgd_k;
pmd_t *pmd_k;
pte_t *pte_k;
Revert "sh: Ensure fixmap and store queue space can co-exist." This reverts commit 20e7c297efeca0861adcca073a0d283da659834b. With store queues enabled the area above P4SEG has special properties from the MMU's point of view, which was causing fixmap failure. We'll have to do something else to satisfy the vmalloc range check. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 12:30:05 +02:00
/* Make sure we are in vmalloc/module/P3 area: */
sh64: Fix up vmalloc fault range check. With the previous attempt reverted this switches to conditionalizing the end address. Nominally VMALLOC_END, but extended for P3_ADDR_MAX in the store queue case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 13:01:16 +02:00
if (!(address >= VMALLOC_START && address < __FAULT_ADDR_LIMIT))
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
return -1;
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
*
* Do _not_ use "current" here. We might be inside
* an interrupt in the middle of a task switch..
*/
pgd_k = get_TTB();
sh: Restore previous behaviour on kernel fault The last commit changed the behaviour on kernel faults when we were doing something other than syncing the page tables. vmalloc_sync_one() needs to return NULL if the page tables are up to date, because the reason for the fault was not a missing/inconsitent page table entry. By returning NULL if the page tables are sync'd we signal to the calling function that further work must be done to resolve this fault. Also, remove the superfluous __va() around the first argument to vmalloc_sync_one(). The value of pgd_k is already a virtual address and using it wth __va() causes a NULL dereference. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-13 13:38:04 +02:00
pmd_k = vmalloc_sync_one(pgd_k, address);
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
if (!pmd_k)
return -1;
pte_k = pte_offset_kernel(pmd_k, address);
if (!pte_present(*pte_k))
return -1;
return 0;
}
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
static void
show_fault_oops(struct pt_regs *regs, unsigned long address)
{
if (!oops_may_print())
return;
printk(KERN_ALERT "BUG: unable to handle kernel ");
if (address < PAGE_SIZE)
printk(KERN_CONT "NULL pointer dereference");
else
printk(KERN_CONT "paging request");
printk(KERN_CONT " at %08lx\n", address);
printk(KERN_ALERT "PC:");
printk_address(regs->pc, 1);
show_pte(NULL, address);
}
static noinline void
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
no_context(struct pt_regs *regs, unsigned long error_code,
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
unsigned long address)
{
/* Are we prepared to handle this kernel fault? */
if (fixup_exception(regs))
return;
if (handle_trapped_io(regs, address))
return;
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
bust_spinlocks(1);
show_fault_oops(regs, address);
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
die("Oops", regs, error_code);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
bust_spinlocks(0);
do_exit(SIGKILL);
}
static void
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
__bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
unsigned long address, int si_code)
{
struct task_struct *tsk = current;
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
/*
* It's possible to have interrupts off here:
*/
local_irq_enable();
force_sig_info_fault(SIGSEGV, si_code, address, tsk);
return;
}
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
no_context(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
}
static noinline void
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
unsigned long address)
{
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
__bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
}
static void
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
__bad_area(struct pt_regs *regs, unsigned long error_code,
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
unsigned long address, int si_code)
{
struct mm_struct *mm = current->mm;
/*
* Something tried to access memory that isn't in our memory map..
* Fix it, but check if it's kernel or user first..
*/
up_read(&mm->mmap_sem);
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
__bad_area_nosemaphore(regs, error_code, address, si_code);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
}
static noinline void
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
{
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
__bad_area(regs, error_code, address, SEGV_MAPERR);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
}
static noinline void
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
unsigned long address)
{
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
__bad_area(regs, error_code, address, SEGV_ACCERR);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
}
static void out_of_memory(void)
{
/*
* We ran out of memory, call the OOM killer, and return the userspace
* (which will retry the fault, or kill us if we got oom-killed):
*/
up_read(&current->mm->mmap_sem);
pagefault_out_of_memory();
}
static void
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
{
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
up_read(&mm->mmap_sem);
/* Kernel mode? Handle exceptions or die: */
if (!user_mode(regs))
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
no_context(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
}
static noinline int
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
mm_fault_error(struct pt_regs *regs, unsigned long error_code,
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
unsigned long address, unsigned int fault)
{
/*
* Pagefault was interrupted by SIGKILL. We have no reason to
* continue pagefault.
*/
if (fatal_signal_pending(current)) {
if (!(fault & VM_FAULT_RETRY))
up_read(&current->mm->mmap_sem);
if (!user_mode(regs))
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
no_context(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
return 1;
}
if (!(fault & VM_FAULT_ERROR))
return 0;
if (fault & VM_FAULT_OOM) {
/* Kernel mode? Handle exceptions or die: */
if (!user_mode(regs)) {
up_read(&current->mm->mmap_sem);
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
no_context(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
return 1;
}
out_of_memory();
} else {
if (fault & VM_FAULT_SIGBUS)
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
do_sigbus(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
else
BUG();
}
return 1;
}
sh: Enable shared page fault handler for _32/_64. This moves the now generic _32 page fault handling code to a shared place and adapts the _64 implementation to make use of it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 08:33:28 +02:00
static inline int access_error(int error_code, struct vm_area_struct *vma)
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
{
sh: Enable shared page fault handler for _32/_64. This moves the now generic _32 page fault handling code to a shared place and adapts the _64 implementation to make use of it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 08:33:28 +02:00
if (error_code & FAULT_CODE_WRITE) {
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
/* write, present and write, not present: */
if (unlikely(!(vma->vm_flags & VM_WRITE)))
return 1;
return 0;
}
sh: Enable shared page fault handler for _32/_64. This moves the now generic _32 page fault handling code to a shared place and adapts the _64 implementation to make use of it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 08:33:28 +02:00
/* ITLB miss on NX page */
if (unlikely((error_code & FAULT_CODE_ITLB) &&
!(vma->vm_flags & VM_EXEC)))
return 1;
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
/* read, not present: */
if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))))
return 1;
return 0;
}
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
static int fault_in_kernel_space(unsigned long address)
{
return address >= TASK_SIZE;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*/
sh: Set up correct siginfo structures for page faults. Remove the previous saving of fault codes into the thread_struct as they are never used, and appeared to be inherited from x86. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-11-21 05:34:04 +01:00
asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
unsigned long error_code,
sh: Set up correct siginfo structures for page faults. Remove the previous saving of fault codes into the thread_struct as they are never used, and appeared to be inherited from x86. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-11-21 05:34:04 +01:00
unsigned long address)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
{
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
unsigned long vec;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct * vma;
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:47:05 +02:00
int fault;
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
int write = error_code & FAULT_CODE_WRITE;
sh/mm/fault_32.c: Port OOM changes to do_page_fault Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to the 32-bit SH platform. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-31 14:06:11 +02:00
unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
(write ? FAULT_FLAG_WRITE : 0));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
tsk = current;
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
mm = tsk->mm;
vec = lookup_exception_vector();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
/*
* We fault-in kernel-space virtual memory on-demand. The
* 'reference' page table is init_mm.pgd.
*
* NOTE! We MUST NOT take any locks for this case. We may
* be in an interrupt or a critical region, and should
* only copy the information from the master page table,
* nothing more.
*/
if (unlikely(fault_in_kernel_space(address))) {
if (vmalloc_fault(address) >= 0)
sh: pmd rework. Remove extra bits from the pmd structure and store a kernel logical address rather than a physical address. This allows it to be directly dereferenced. Another piece of wierdness inherited from x86. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-11-21 07:38:05 +01:00
return;
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
if (notify_page_fault(regs, vec))
sh: vmalloc pgtable sync fix. This fixes a problem in the code which copies the vmalloc portion of the kernel's page table into the current user space page table. The addition of the four level page table code breaks on folded page tables, because the pud level is always present (although folded). This updates the code to use the same style of updates for the pud as is used for the pgd level. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-05 09:17:15 +02:00
return;
sh: pmd rework. Remove extra bits from the pmd structure and store a kernel logical address rather than a physical address. This allows it to be directly dereferenced. Another piece of wierdness inherited from x86. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-11-21 07:38:05 +01:00
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
bad_area_nosemaphore(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
return;
sh: pmd rework. Remove extra bits from the pmd structure and store a kernel logical address rather than a physical address. This allows it to be directly dereferenced. Another piece of wierdness inherited from x86. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-11-21 07:38:05 +01:00
}
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
if (unlikely(notify_page_fault(regs, vec)))
sh: Hook up page fault events for software perf counters. This adds page fault instrumentation for the software performance counters. Follows the x86 and powerpc changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-24 19:30:10 +02:00
return;
sh: Conditionally re-enable IRQs in fault path. The current kernel behaviour is to reenable interrupts unconditionally when taking a page fault. This patch changes this to only enable them if interrupts were previously enabled. It also fixes a problem seen with this fix in place: the kernel previously flushed the vsyscall page when handling a signal, which is not only unncessary, but caused a possible sleep with interrupts disabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-02 10:51:23 +02:00
/* Only enable interrupts if they were on before the fault */
sh: Hook up page fault events for software perf counters. This adds page fault instrumentation for the software performance counters. Follows the x86 and powerpc changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-24 19:30:10 +02:00
if ((regs->sr & SR_IMASK) != SR_IMASK)
sh: Conditionally re-enable IRQs in fault path. The current kernel behaviour is to reenable interrupts unconditionally when taking a page fault. This patch changes this to only enable them if interrupts were previously enabled. It also fixes a problem seen with this fix in place: the kernel previously flushed the vsyscall page when handling a signal, which is not only unncessary, but caused a possible sleep with interrupts disabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-02 10:51:23 +02:00
local_irq_enable();
perf: Remove the nmi parameter from the swevent and overflow interface The nmi parameter indicated if we could do wakeups from the current context, if not, we would set some state and self-IPI and let the resulting interrupt do the wakeup. For the various event classes: - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from the PMI-tail (ARM etc.) - tracepoint: nmi=0; since tracepoint could be from NMI context. - software: nmi=[0,1]; some, like the schedule thing cannot perform wakeups, and hence need 0. As one can see, there is very little nmi=1 usage, and the down-side of not using it is that on some platforms some software events can have a jiffy delay in wakeup (when arch_irq_work_raise isn't implemented). The up-side however is that we can remove the nmi parameter and save a bunch of conditionals in fast paths. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Will Deacon <will.deacon@arm.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Eric B Munson <emunson@mgebm.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-27 14:41:57 +02:00
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
sh: Conditionally re-enable IRQs in fault path. The current kernel behaviour is to reenable interrupts unconditionally when taking a page fault. This patch changes this to only enable them if interrupts were previously enabled. It also fixes a problem seen with this fix in place: the kernel previously flushed the vsyscall page when handling a signal, which is not only unncessary, but caused a possible sleep with interrupts disabled. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-02 10:51:23 +02:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
* If we're in an interrupt, have no user context or are running
* in an atomic region then we must not take the fault:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
*/
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
if (unlikely(in_atomic() || !mm)) {
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
bad_area_nosemaphore(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
return;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
sh/mm/fault_32.c: Port OOM changes to do_page_fault Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to the 32-bit SH platform. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-31 14:06:11 +02:00
retry:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
if (unlikely(!vma)) {
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
bad_area(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
return;
}
if (likely(vma->vm_start <= address))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
goto good_area;
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
bad_area(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
return;
}
if (unlikely(expand_stack(vma, address))) {
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
bad_area(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
return;
}
sh: Tidy up vmalloc fault handling. This rewrites the vmalloc fault handling as per x86, which subsequently allows for easy future tie-in for vmalloc_sync_all(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04 20:18:47 +02:00
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
good_area:
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
if (unlikely(access_error(error_code, vma))) {
bad_area_access_error(regs, error_code, address);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
}
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
set_thread_fault_code(error_code);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
sh/mm/fault_32.c: Port OOM changes to do_page_fault Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to the 32-bit SH platform. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-31 14:06:11 +02:00
fault = handle_mm_fault(mm, vma, address, flags);
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
if (unlikely(fault & (VM_FAULT_RETRY | VM_FAULT_ERROR)))
sh: Support thread fault code encoding. This provides a simple interface modelled after sparc64/m32r to encode the error code in the upper byte of thread_info for finer-grained handling in the page fault path. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 07:57:28 +02:00
if (mm_fault_error(regs, error_code, address, fault))
sh: Tidy up and generalize page fault error paths. This follows the x86 changes for tidying up the page fault error paths. We'll build on top of this for _32/_64 unification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-14 03:27:34 +02:00
return;
sh/mm/fault_32.c: Port OOM changes to do_page_fault Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to the 32-bit SH platform. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-31 14:06:11 +02:00
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
regs, address);
} else {
tsk->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
regs, address);
}
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
/*
* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
sh: Hook up page fault events for software perf counters. This adds page fault instrumentation for the software performance counters. Follows the x86 and powerpc changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-24 19:30:10 +02:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
up_read(&mm->mmap_sem);
}