OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/drivers/base/base.h

177 lines
6.4 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
/* SPDX-License-Identifier: GPL-2.0 */
drivers/base: base.h implicitly depends on <linux/notifier.h> This file is currently relying on <linux/module.h> sneaking it in through the implicit include paths from device.h. Once that is cleaned up, this will happen: In file included from drivers/base/init.c:12: drivers/base/base.h:34: error: field ‘bus_notifier’ has incomplete type make[3]: *** [drivers/base/init.o] Error 1 Fix it up in advance, so the cleanup can continue. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-27 00:08:35 +02:00
#include <linux/notifier.h>
[PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-13 18:54:41 +02:00
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
/**
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
* struct subsys_private - structure to hold the private to the driver core portions of the bus_type/class structure.
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
*
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
* @subsys - the struct kset that defines this subsystem
driver-core: implement 'sysdev' functionality for regular devices and buses All sysdev classes and sysdev devices will converted to regular devices and buses to properly hook userspace into the event processing. There is no interesting difference between a 'sysdev' and 'device' which would justify to roll an entire own subsystem with different userspace export semantics. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are currently not properly available. Every converted sysdev class will create a regular device with the class name in /sys/devices/system and all registered devices will becom a children of theses devices. For compatibility reasons, the sysdev class-wide attributes are created at this parent device. (Do not copy that logic for anything new, subsystem- wide properties belong to the subsystem, not to some fake parent device created in /sys/devices.) Every sysdev driver is implemented as a simple subsystem interface now, and no longer called a driver. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-14 23:29:38 +01:00
* @devices_kset - the subsystem's 'devices' directory
* @interfaces - list of subsystem interfaces associated
* @mutex - protect the devices, and interfaces lists.
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
*
* @drivers_kset - the list of drivers associated
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
* @klist_devices - the klist to iterate over the @devices_kset
* @klist_drivers - the klist to iterate over the @drivers_kset
* @bus_notifier - the bus notifier list for anything that cares about things
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
* on this bus.
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
* @bus - pointer back to the struct bus_type that this structure is associated
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
* with.
*
* @glue_dirs - "glue" directory to put in-between the parent device to
* avoid namespace conflicts
* @class - pointer back to the struct class that this structure is associated
* with.
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
*
* This structure is the one that is the actual kobject allowing struct
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
* bus_type/class to be statically allocated safely. Nothing outside of the
* driver core should ever touch these fields.
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
*/
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
struct subsys_private {
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
struct kset subsys;
struct kset *devices_kset;
driver-core: implement 'sysdev' functionality for regular devices and buses All sysdev classes and sysdev devices will converted to regular devices and buses to properly hook userspace into the event processing. There is no interesting difference between a 'sysdev' and 'device' which would justify to roll an entire own subsystem with different userspace export semantics. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are currently not properly available. Every converted sysdev class will create a regular device with the class name in /sys/devices/system and all registered devices will becom a children of theses devices. For compatibility reasons, the sysdev class-wide attributes are created at this parent device. (Do not copy that logic for anything new, subsystem- wide properties belong to the subsystem, not to some fake parent device created in /sys/devices.) Every sysdev driver is implemented as a simple subsystem interface now, and no longer called a driver. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-14 23:29:38 +01:00
struct list_head interfaces;
struct mutex mutex;
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
struct kset *drivers_kset;
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
struct klist klist_devices;
struct klist klist_drivers;
struct blocking_notifier_head bus_notifier;
unsigned int drivers_autoprobe:1;
struct bus_type *bus;
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
struct kset glue_dirs;
struct class *class;
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
};
driver-core: merge private parts of class and bus As classes and busses are pretty much the same thing, and we want to merge them together into a 'subsystem' in the future, let us share the same private data parts to make that merge easier. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-15 23:13:18 +01:00
#define to_subsys_private(obj) container_of(obj, struct subsys_private, subsys.kobj)
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
Driver core: move the static kobject out of struct driver This patch removes the kobject, and a few other driver-core-only fields out of struct driver and into the driver core only. Now drivers can be safely create on the stack or statically (like they currently are.) Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-29 00:59:15 +01:00
struct driver_private {
struct kobject kobj;
struct klist klist_devices;
struct klist_node knode_bus;
struct module_kobject *mkobj;
struct device_driver *driver;
};
#define to_driver(obj) container_of(obj, struct driver_private, kobj)
[PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-13 18:54:41 +02:00
driver core: create a private portion of struct device This is to be used to move things out of struct device that no code outside of the driver core should ever touch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:23:36 +01:00
/**
* struct device_private - structure to hold the private to the driver core portions of the device structure.
*
driver core: move klist_children into private structure Nothing outside of the driver core should ever touch klist_children, or knode_parent, so move them out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:24:56 +01:00
* @klist_children - klist containing all children of this device
* @knode_parent - node in sibling list
driver core: move knode_driver into private structure Nothing outside of the driver core should ever touch knode_driver, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:25:49 +01:00
* @knode_driver - node in driver list
driver core: move knode_bus into private structure Nothing outside of the driver core should ever touch knode_bus, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:26:21 +01:00
* @knode_bus - node in bus list
driver core: move device->knode_class to device_private As the description of struct device_private says, it stores data which is private to driver core. And it already has similar fields like: knode_parent, knode_driver, knode_driver and knode_bus. This look it is more proper to put knode_class together with those fields to make it private to driver core. This patch move device->knode_class to device_private to make it comply with code convention. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18 03:34:59 +01:00
* @knode_class - node in class list
driver core: move the deferred probe pointer into the private area Nothing outside of the driver core needs to get to the deferred probe pointer, so move it inside the private area of 'struct device' so no one tries to mess around with it. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 21:17:22 +01:00
* @deferred_probe - entry in deferred_probe_list which is used to retry the
* binding of drivers which were unable to get all the resources needed by
* the device; typically because it depends on another driver getting
* probed first.
driver core: Probe devices asynchronously instead of the driver Probe devices asynchronously instead of the driver. This results in us seeing the same behavior if the device is registered before the driver or after. This way we can avoid serializing the initialization should the driver not be loaded until after the devices have already been added. The motivation behind this is that if we have a set of devices that take a significant amount of time to load we can greatly reduce the time to load by processing them in parallel instead of one at a time. In addition, each device can exist on a different node so placing a single thread on one CPU to initialize all of the devices for a given driver can result in poor performance on a system with multiple nodes. This approach can reduce the time needed to scan SCSI LUNs significantly. The only way to realize that speedup is by enabling more concurrency which is what is achieved with this patch. To achieve this it was necessary to add a new member "async_driver" to the device_private structure to store the driver pointer while we wait on the deferred probe call. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 19:39:21 +01:00
* @async_driver - pointer to device driver awaiting probe via async_probe
driver core: fix docbook for device_private.device This field refers to the public device struct, not to classes. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-29 16:59:02 +02:00
* @device - pointer back to the struct device that this structure is
driver core: create a private portion of struct device This is to be used to move things out of struct device that no code outside of the driver core should ever touch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:23:36 +01:00
* associated with.
driver core: Establish order of operations for device_add and device_del via bitflag Add an additional bit flag to the device_private struct named "dead". This additional flag provides a guarantee that when a device_del is executed on a given interface an async worker will not attempt to attach the driver following the earlier device_del call. Previously this guarantee was not present and could result in the device_del call attempting to remove a driver from an interface only to have the async worker attempt to probe the driver later when it finally completes the asynchronous probe call. One additional change added was that I pulled the check for dev->driver out of the __device_attach_driver call and instead placed it in the __device_attach_async_helper call. This was motivated by the fact that the only other caller of this, __device_attach, had already taken the device_lock() and checked for dev->driver. Instead of testing for this twice in this path it makes more sense to just consolidate the dev->dead and dev->driver checks together into one set of checks. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 19:39:10 +01:00
* @dead - This device is currently either in the process of or has been
* removed from the system. Any asynchronous events scheduled for this
* device should exit without taking any action.
driver core: create a private portion of struct device This is to be used to move things out of struct device that no code outside of the driver core should ever touch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:23:36 +01:00
*
* Nothing outside of the driver core should ever touch these fields.
*/
struct device_private {
driver core: move klist_children into private structure Nothing outside of the driver core should ever touch klist_children, or knode_parent, so move them out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:24:56 +01:00
struct klist klist_children;
struct klist_node knode_parent;
driver core: move knode_driver into private structure Nothing outside of the driver core should ever touch knode_driver, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:25:49 +01:00
struct klist_node knode_driver;
driver core: move knode_bus into private structure Nothing outside of the driver core should ever touch knode_bus, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:26:21 +01:00
struct klist_node knode_bus;
driver core: move device->knode_class to device_private As the description of struct device_private says, it stores data which is private to driver core. And it already has similar fields like: knode_parent, knode_driver, knode_driver and knode_bus. This look it is more proper to put knode_class together with those fields to make it private to driver core. This patch move device->knode_class to device_private to make it comply with code convention. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18 03:34:59 +01:00
struct klist_node knode_class;
driver core: move the deferred probe pointer into the private area Nothing outside of the driver core needs to get to the deferred probe pointer, so move it inside the private area of 'struct device' so no one tries to mess around with it. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 21:17:22 +01:00
struct list_head deferred_probe;
driver core: Probe devices asynchronously instead of the driver Probe devices asynchronously instead of the driver. This results in us seeing the same behavior if the device is registered before the driver or after. This way we can avoid serializing the initialization should the driver not be loaded until after the devices have already been added. The motivation behind this is that if we have a set of devices that take a significant amount of time to load we can greatly reduce the time to load by processing them in parallel instead of one at a time. In addition, each device can exist on a different node so placing a single thread on one CPU to initialize all of the devices for a given driver can result in poor performance on a system with multiple nodes. This approach can reduce the time needed to scan SCSI LUNs significantly. The only way to realize that speedup is by enabling more concurrency which is what is achieved with this patch. To achieve this it was necessary to add a new member "async_driver" to the device_private structure to store the driver pointer while we wait on the deferred probe call. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 19:39:21 +01:00
struct device_driver *async_driver;
driver core: create a private portion of struct device This is to be used to move things out of struct device that no code outside of the driver core should ever touch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:23:36 +01:00
struct device *device;
driver core: Establish order of operations for device_add and device_del via bitflag Add an additional bit flag to the device_private struct named "dead". This additional flag provides a guarantee that when a device_del is executed on a given interface an async worker will not attempt to attach the driver following the earlier device_del call. Previously this guarantee was not present and could result in the device_del call attempting to remove a driver from an interface only to have the async worker attempt to probe the driver later when it finally completes the asynchronous probe call. One additional change added was that I pulled the check for dev->driver out of the __device_attach_driver call and instead placed it in the __device_attach_async_helper call. This was motivated by the fact that the only other caller of this, __device_attach, had already taken the device_lock() and checked for dev->driver. Instead of testing for this twice in this path it makes more sense to just consolidate the dev->dead and dev->driver checks together into one set of checks. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 19:39:10 +01:00
u8 dead:1;
driver core: create a private portion of struct device This is to be used to move things out of struct device that no code outside of the driver core should ever touch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:23:36 +01:00
};
driver core: move klist_children into private structure Nothing outside of the driver core should ever touch klist_children, or knode_parent, so move them out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:24:56 +01:00
#define to_device_private_parent(obj) \
container_of(obj, struct device_private, knode_parent)
driver core: move knode_driver into private structure Nothing outside of the driver core should ever touch knode_driver, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:25:49 +01:00
#define to_device_private_driver(obj) \
container_of(obj, struct device_private, knode_driver)
driver core: move knode_bus into private structure Nothing outside of the driver core should ever touch knode_bus, so move it out of the public eye. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:26:21 +01:00
#define to_device_private_bus(obj) \
container_of(obj, struct device_private, knode_bus)
driver core: move device->knode_class to device_private As the description of struct device_private says, it stores data which is private to driver core. And it already has similar fields like: knode_parent, knode_driver, knode_driver and knode_bus. This look it is more proper to put knode_class together with those fields to make it private to driver core. This patch move device->knode_class to device_private to make it comply with code convention. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18 03:34:59 +01:00
#define to_device_private_class(obj) \
container_of(obj, struct device_private, knode_class)
driver core: create a private portion of struct device This is to be used to move things out of struct device that no code outside of the driver core should ever touch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-16 21:23:36 +01:00
driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-02 03:41:16 +01:00
/* initialisation functions */
[PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-13 18:54:41 +02:00
extern int devices_init(void);
extern int buses_init(void);
extern int classes_init(void);
extern int firmware_init(void);
[PATCH] Driver Core: Add /sys/hypervisor when needed To have a home for all hypervisors, this patch creates /sys/hypervisor. A new config option SYS_HYPERVISOR is introduced, which should to be set by architecture dependent hypervisors (e.g. s390 or Xen). Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-09 12:53:49 +02:00
#ifdef CONFIG_SYS_HYPERVISOR
extern int hypervisor_init(void);
#else
static inline int hypervisor_init(void) { return 0; }
#endif
[PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-13 18:54:41 +02:00
extern int platform_bus_init(void);
cpu: Do not return errors from cpu_dev_init() which will be ignored cpu_dev_init() is only called from driver_init(), which does not check its return value. Therefore make cpu_dev_init() return void. We must register the CPU subsystem, so panic if this fails. If sched_create_sysfs_power_savings_entries() fails, the damage is contained, so ignore this (as before). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 03:59:49 +01:00
extern void cpu_dev_init(void);
ACPI / hotplug / driver core: Handle containers in a special way ACPI container devices require special hotplug handling, at least on some systems, since generally user space needs to carry out system-specific cleanup before it makes sense to offline devices in the container. However, the current ACPI hotplug code for containers first attempts to offline devices in the container and only then it notifies user space of the container offline. Moreover, after commit 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace), ACPI device objects representing containers are present as long as the ACPI namespace nodes corresponding to them are present, which may be forever, even if the container devices are physically detached from the system (the return values of the corresponding _STA methods change in those cases, but generally the namespace nodes themselves are still there). Thus it is useful to introduce entities representing containers that will go away during container hot-unplug. The goal of this change is to address both the above issues. The idea is to create a "companion" container system device for each of the ACPI container device objects during the initial namespace scan or on a hotplug event making the container present. That system device will be unregistered on container removal. A new bus type for container devices is added for this purpose, because device offline and online operations need to be defined for them. The online operation is a trivial function that is always successful and the offline uses a callback pointed to by the container device's offline member. For ACPI containers that callback simply walks the list of ACPI device objects right below the container object (its children) and checks if all of their physical companion devices are offline. If that's not the case, it returns -EBUSY and the container system devivce cannot be put offline. Consequently, to put the container system device offline, it is necessary to put all of the physical devices depending on its ACPI companion object offline beforehand. Container system devices created for ACPI container objects are initially online. They are created by the container ACPI scan handler whose hotplug.demand_offline flag is set. That causes acpi_scan_hot_remove() to check if the companion container system device is offline before attempting to remove an ACPI container or any devices below it. If the check fails, a KOBJ_CHANGE uevent is emitted for the container system device in question and user space is expected to offline all devices below the container and the container itself in response to it. Then, user space can finalize the removal of the container with the help of its ACPI device object's eject attribute in sysfs. Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-29 15:25:48 +01:00
extern void container_dev_init(void);
[PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-13 18:54:41 +02:00
driver/base: implement subsys_virtual_register() Kay tells me the most appropriate place to expose workqueues to userland would be /sys/devices/virtual/workqueues/WQ_NAME which is symlinked to /sys/bus/workqueue/devices/WQ_NAME and that we're lacking a way to do that outside of driver core as virtual_device_parent() isn't exported and there's no inteface to conveniently create a virtual subsystem. This patch implements subsys_virtual_register() by factoring out subsys_register() from subsys_system_register() and using it with virtual_device_parent() as the origin directory. It's identical to subsys_system_register() other than the origin directory but we aren't gonna restrict the device names which should be used under it. This will be used to expose workqueue attributes to userland. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kay Sievers <kay.sievers@vrfy.org>
2013-03-12 19:30:05 +01:00
struct kobject *virtual_device_parent(struct device *dev);
Driver core: coding style fixes Fix up a number of coding style issues in the drivers/base/ directory that have annoyed me over the years. checkpatch.pl is now very happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25 07:50:12 +01:00
extern int bus_add_device(struct device *dev);
Driver core: add new device to bus's list before probing This patch (as1271) affects when new devices get linked into their bus's list of devices. Currently this happens after probing, and it doesn't happen at all if probing fails. Clearly this is wrong, because at that point quite a few symbolic links have already been created in sysfs. We are committed to adding the device, so it should be linked into the bus's list regardless. In addition, this needs to happen before the uevent announcing the new device gets issued. Otherwise user programs might try to access the device before it has been added to the bus. To fix both these problems, the patch moves the call to klist_add_tail() forward from bus_attach_device() to bus_add_device(). Since bus_attach_device() now does nothing but probe for drivers, it has been renamed to bus_probe_device(). And lastly, the kerneldoc is updated. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-30 21:27:18 +02:00
extern void bus_probe_device(struct device *dev);
Driver core: coding style fixes Fix up a number of coding style issues in the drivers/base/ directory that have annoyed me over the years. checkpatch.pl is now very happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25 07:50:12 +01:00
extern void bus_remove_device(struct device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
Driver core: coding style fixes Fix up a number of coding style issues in the drivers/base/ directory that have annoyed me over the years. checkpatch.pl is now very happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25 07:50:12 +01:00
extern int bus_add_driver(struct device_driver *drv);
extern void bus_remove_driver(struct device_driver *drv);
driver core: Functional dependencies tracking support Currently, there is a problem with taking functional dependencies between devices into account. What I mean by a "functional dependency" is when the driver of device B needs device A to be functional and (generally) its driver to be present in order to work properly. This has certain consequences for power management (suspend/resume and runtime PM ordering) and shutdown ordering of these devices. In general, it also implies that the driver of A needs to be working for B to be probed successfully and it cannot be unbound from the device before the B's driver. Support for representing those functional dependencies between devices is added here to allow the driver core to track them and act on them in certain cases where applicable. The argument for doing that in the driver core is that there are quite a few distinct use cases involving device dependencies, they are relatively hard to get right in a driver (if one wants to address all of them properly) and it only gets worse if multiplied by the number of drivers potentially needing to do it. Morever, at least one case (asynchronous system suspend/resume) cannot be handled in a single driver at all, because it requires the driver of A to wait for B to suspend (during system suspend) and the driver of B to wait for A to resume (during system resume). For this reason, represent dependencies between devices as "links", with the help of struct device_link objects each containing pointers to the "linked" devices, a list node for each of them, status information, flags, and an RCU head for synchronization. Also add two new list heads, representing the lists of links to the devices that depend on the given one (consumers) and to the devices depended on by it (suppliers), and a "driver presence status" field (needed for figuring out initial states of device links) to struct device. The entire data structure consisting of all of the lists of link objects for all devices is protected by a mutex (for link object addition/removal and for list walks during device driver probing and removal) and by SRCU (for list walking in other case that will be introduced by subsequent change sets). If CONFIG_SRCU is not selected, however, an rwsem is used for protecting the entire data structure. In addition, each link object has an internal status field whose value reflects whether or not drivers are bound to the devices pointed to by the link or probing/removal of their drivers is in progress etc. That field is only modified under the device links mutex, but it may be read outside of it in some cases (introduced by subsequent change sets), so modifications of it are annotated with WRITE_ONCE(). New links are added by calling device_link_add() which takes three arguments: pointers to the devices in question and flags. In particular, if DL_FLAG_STATELESS is set in the flags, the link status is not to be taken into account for this link and the driver core will not manage it. In turn, if DL_FLAG_AUTOREMOVE is set in the flags, the driver core will remove the link automatically when the consumer device driver unbinds from it. One of the actions carried out by device_link_add() is to reorder the lists used for device shutdown and system suspend/resume to put the consumer device along with all of its children and all of its consumers (and so on, recursively) to the ends of those lists in order to ensure the right ordering between all of the supplier and consumer devices. For this reason, it is not possible to create a link between two devices if the would-be supplier device already depends on the would-be consumer device as either a direct descendant of it or a consumer of one of its direct descendants or one of its consumers and so on. There are two types of link objects, persistent and non-persistent. The persistent ones stay around until one of the target devices is deleted, while the non-persistent ones are removed automatically when the consumer driver unbinds from its device (ie. they are assumed to be valid only as long as the consumer device has a driver bound to it). Persistent links are created by default and non-persistent links are created when the DL_FLAG_AUTOREMOVE flag is passed to device_link_add(). Both persistent and non-persistent device links can be deleted with an explicit call to device_link_del(). Links created without the DL_FLAG_STATELESS flag set are managed by the driver core using a simple state machine. There are 5 states each link can be in: DORMANT (unused), AVAILABLE (the supplier driver is present and functional), CONSUMER_PROBE (the consumer driver is probing), ACTIVE (both supplier and consumer drivers are present and functional), and SUPPLIER_UNBIND (the supplier driver is unbinding). The driver core updates the link state automatically depending on what happens to the linked devices and for each link state specific actions are taken in addition to that. For example, if the supplier driver unbinds from its device, the driver core will also unbind the drivers of all of its consumers automatically under the assumption that they cannot function properly without the supplier. Analogously, the driver core will only allow the consumer driver to bind to its device if the supplier driver is present and functional (ie. the link is in the AVAILABLE state). If that's not the case, it will rely on the existing deferred probing mechanism to wait for the supplier driver to become available. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-30 17:32:16 +01:00
extern void device_release_driver_internal(struct device *dev,
struct device_driver *drv,
struct device *parent);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
Driver core: coding style fixes Fix up a number of coding style issues in the drivers/base/ directory that have annoyed me over the years. checkpatch.pl is now very happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-25 07:50:12 +01:00
extern void driver_detach(struct device_driver *drv);
extern int driver_probe_device(struct device_driver *drv, struct device *dev);
drivercore: Add driver probe deferral mechanism Allow drivers to report at probe time that they cannot get all the resources required by the device, and should be retried at a later time. This should completely solve the problem of getting devices initialized in the right order. Right now this is mostly handled by mucking about with initcall ordering which is a complete hack, and doesn't even remotely handle the case where device drivers are in modules. This approach completely sidesteps the issues by allowing driver registration to occur in any order, and any driver can request to be retried after a few more other drivers get probed. v4: - Integrate Manjunath's addition of a separate workqueue - Change -EAGAIN to -EPROBE_DEFER for drivers to trigger deferral - Update comment blocks to reflect how the code really works v3: - Hold off workqueue scheduling until late_initcall so that the bulk of driver probes are complete before we start retrying deferred devices. - Tested with simple use cases. Still needs more testing though. Using it to get rid of the gpio early_initcall madness, or to replace the ASoC internal probe deferral code would be ideal. v2: - added locking so it should no longer be utterly broken in that regard - remove device from deferred list at device_del time. - Still completely untested with any real use case, but has been boot tested. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dilan Lee <dilee@nvidia.com> Cc: Manjunath GKondaiah <manjunath.gkondaiah@linaro.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Tony Lindgren <tony@atomide.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-05 16:47:41 +01:00
extern void driver_deferred_probe_del(struct device *dev);
driver core: check bus->match without holding device lock This patch moves bus->match out from driver_probe_device and does not hold device lock to check the match between a device and a driver. The idea has been verified by the commit 6cd495860901, which leads to a faster boot. But the commit 6cd495860901 has the following drawbacks: 1),only does the quick check in the path of __driver_attach->driver_probe_device, not in other paths; 2),for a matched device and driver, check the same match twice. It is a waste of cpu ,especially for some drivers with long device id table (eg. usb-storage driver). This patch adds a helper of driver_match_device to check the match in all paths, and testes the match only once. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-21 16:27:47 +01:00
static inline int driver_match_device(struct device_driver *drv,
struct device *dev)
{
driver core: fix driver_match_device This patch fixes a bug introduced in commit 49b420a13ff95b449947181190b08367348e3e1b. If a instance of bus_type doesn't have .match method, all .probe of drivers in the bus should be called, or else the .probe have not a chance to be called. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-27 14:50:00 +01:00
return drv->bus->match ? drv->bus->match(dev, drv) : 1;
driver core: check bus->match without holding device lock This patch moves bus->match out from driver_probe_device and does not hold device lock to check the match between a device and a driver. The idea has been verified by the commit 6cd495860901, which leads to a faster boot. But the commit 6cd495860901 has the following drawbacks: 1),only does the quick check in the path of __driver_attach->driver_probe_device, not in other paths; 2),for a matched device and driver, check the same match twice. It is a waste of cpu ,especially for some drivers with long device id table (eg. usb-storage driver). This patch adds a helper of driver_match_device to check the match in all paths, and testes the match only once. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-21 16:27:47 +01:00
}
driver-core: add asynchronous probing support for drivers Some devices take a long time when initializing, and not all drivers are suited to initialize their devices when they are open. For example, input drivers need to interrogate their devices in order to publish device's capabilities before userspace will open them. When such drivers are compiled into kernel they may stall entire kernel initialization. This change allows drivers request for their probe functions to be called asynchronously during driver and device registration (manual binding is still synchronous). Because async_schedule is used to perform asynchronous calls module loading will still wait for the probing to complete. Note that the end goal is to make the probing asynchronous by default, so annotating drivers with PROBE_PREFER_ASYNCHRONOUS is a temporary measure that allows us to speed up boot process while we validating and fixing the rest of the drivers and preparing userspace. This change is based on earlier patch by "Luis R. Rodriguez" <mcgrof@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-31 01:20:04 +02:00
extern bool driver_allows_async_probing(struct device_driver *drv);
[PATCH] Move device/driver code to drivers/base/dd.c This relocates the driver binding/unbinding code to drivers/base/dd.c. This is done for two reasons: One, it's not code related to the bus_type itself; it uses some from that, some from devices, and some from drivers. And Two, it will make it easier to do some of the upcoming lock removal on that code.. Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-03-21 19:52:54 +01:00
driver core: bus_type: add drv_groups attribute groups are much more flexible than just a list of attributes, due to their support for visibility of the attributes, and binary attributes. Add drv_groups to struct bus_type which should be used instead of drv_attrs. drv_attrs will be removed from the structure soon. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-09 00:22:56 +02:00
extern int driver_add_groups(struct device_driver *drv,
const struct attribute_group **groups);
extern void driver_remove_groups(struct device_driver *drv,
const struct attribute_group **groups);
device core: Consolidate locking and unlocking of parent and device Try to consolidate all of the locking and unlocking of both the parent and device when attaching or removing a driver from a given device. To do that I first consolidated the lock pattern into two functions __device_driver_lock and __device_driver_unlock. After doing that I then created functions specific to attaching and detaching the driver while acquiring these locks. By doing this I was able to reduce the number of spots where we touch need_parent_lock from 12 down to 4. This patch should produce no functional changes, it is meant to be a code clean-up/consolidation only. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 19:39:16 +01:00
int device_driver_attach(struct device_driver *drv, struct device *dev);
void device_driver_detach(struct device *dev);
driver core: bus_type: add drv_groups attribute groups are much more flexible than just a list of attributes, due to their support for visibility of the attributes, and binary attributes. Add drv_groups to struct bus_type which should be used instead of drv_attrs. drv_attrs will be removed from the structure soon. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-09 00:22:56 +02:00
[PATCH] Driver core: change make_class_name() to take kobjects This is needed for a future patch for the device code to create the proper symlinks for devices that are "class devices". Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-20 22:59:20 +02:00
extern char *make_class_name(const char *name, struct kobject *kobj);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 00:20:36 +02:00
Driver core: fix devres_release_all() return value Every file should include the headers containing the prototypes for it's global functions. Since the GNU C compiler is now able to detect that the function prototype of devres_release_all() in the header and the actual function disagree regarding the return value, this patch also fixes this bug. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-18 01:42:54 +02:00
extern int devres_release_all(struct device *dev);
PM / sleep: prohibit devices probing during suspend/hibernation It is unsafe [1] if probing of devices will happen during suspend or hibernation and system behavior will be unpredictable in this case. So, let's prohibit device's probing in dpm_prepare() and defer their probing instead. The normal behavior will be restored in dpm_complete(). This patch introduces new DD core APIs: device_block_probing() It will disable probing of devices and defer their probes instead. device_unblock_probing() It will restore normal behavior and trigger re-probing of deferred devices. [1] https://lkml.org/lkml/2015/9/11/554 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-10 10:42:34 +01:00
extern void device_block_probing(void);
extern void device_unblock_probing(void);
remove "struct subsystem" as it is no longer needed We need to work on cleaning up the relationship between kobjects, ksets and ktypes. The removal of 'struct subsystem' is the first step of this, especially as it is not really needed at all. Thanks to Kay for fixing the bugs in this patch. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-13 22:15:19 +02:00
driver-core: implement 'sysdev' functionality for regular devices and buses All sysdev classes and sysdev devices will converted to regular devices and buses to properly hook userspace into the event processing. There is no interesting difference between a 'sysdev' and 'device' which would justify to roll an entire own subsystem with different userspace export semantics. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are currently not properly available. Every converted sysdev class will create a regular device with the class name in /sys/devices/system and all registered devices will becom a children of theses devices. For compatibility reasons, the sysdev class-wide attributes are created at this parent device. (Do not copy that logic for anything new, subsystem- wide properties belong to the subsystem, not to some fake parent device created in /sys/devices.) Every sysdev driver is implemented as a simple subsystem interface now, and no longer called a driver. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-14 23:29:38 +01:00
/* /sys/devices directory */
kset: convert /sys/devices to use kset_create Dynamically create the kset instead of declaring it statically. We also rename devices_subsys to devices_kset to catch all users of the variable. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-01 16:29:06 +01:00
extern struct kset *devices_kset;
driver core: correct device's shutdown order Now device's shutdown sequence is performed in reverse order of their registration in devices_kset list and this sequence corresponds to the reverse device's creation order. So, devices_kset data tracks "parent<-child" device's dependencies only. Unfortunately, that's not enough and causes problems in case of implementing board's specific shutdown procedures. For example [1]: "DRA7XX_evm uses PCF8575 and one of the PCF output lines feeds to MMC/SD and this line should be driven high in order for the MMC/SD to be detected. This line is modelled as regulator and the hsmmc driver takes care of enabling and disabling it. In the case of 'reboot', during shutdown path as part of it's cleanup process the hsmmc driver disables this regulator. This makes MMC boot not functional." To handle this issue the .shutdown() callback could be implemented for PCF8575 device where corresponding GPIO pins will be configured to states, required for correct warm/cold reset. This can be achieved only when all .shutdown() callbacks have been called already for all PCF8575's consumers. But devices_kset is not filled correctly now: devices_kset: Device61 4e000000.dmm devices_kset: Device62 48070000.i2c devices_kset: Device63 48072000.i2c devices_kset: Device64 48060000.i2c devices_kset: Device65 4809c000.mmc ... devices_kset: Device102 fixedregulator-sd ... devices_kset: Device181 0-0020 // PCF8575 devices_kset: Device182 gpiochip496 devices_kset: Device183 0-0021 // PCF8575 devices_kset: Device184 gpiochip480 As can be seen from above .shutdown() callback for PCF8575 will be called before its consumers, which, in turn means, that any changes of PCF8575 GPIO's pins will be or unsafe or overwritten later by GPIO's consumers. The problem can be solved if devices_kset list will be filled not only according device creation order, but also according device's probing order to track "supplier<-consumer" dependencies also. Hence, as a fix, lets add devices_kset_move_last(), devices_kset_move_before(), devices_kset_move_after() and call them from device_move() and also add call of devices_kset_move_last() in really_probe(). After this change all entries in devices_kset will be sorted according to device's creation ("parent<-child") and probing ("supplier<-consumer") order. devices_kset after: devices_kset: Device121 48070000.i2c devices_kset: Device122 i2c-0 ... devices_kset: Device147 regulator.24 devices_kset: Device148 0-0020 devices_kset: Device149 gpiochip496 devices_kset: Device150 0-0021 devices_kset: Device151 gpiochip480 devices_kset: Device152 0-0019 ... devices_kset: Device372 fixedregulator-sd devices_kset: Device373 regulator.29 devices_kset: Device374 4809c000.mmc devices_kset: Device375 mmc0 [1] http://www.spinics.net/lists/linux-mmc/msg29825.html Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 19:43:01 +02:00
extern void devices_kset_move_last(struct device *dev);
Driver core: move the driver specific module code into the driver core The module driver specific code should belong in the driver core, not in the kernel/ directory. So move this code. This is done in preparation for some struct device_driver rework that should be confined to the driver core code only. This also lets us keep from exporting these functions, as no external code should ever be calling it. Thanks to Andrew Morton for the !CONFIG_MODULES fix. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 21:23:18 +01:00
driver core: fix build with SYSFS=n When SYSFS=n and MODULES=y, build ends with: linux-2.6.24-rc6-mm1/drivers/base/module.c: In function 'module_add_driver': linux-2.6.24-rc6-mm1/drivers/base/module.c:49: error: 'module_kset' undeclared (first use in this function) make[3]: *** [drivers/base/module.o] Error 1 Below is one possible fix. Build-tested with all 4 config combinations of SYSFS & MODULES. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 19:05:43 +01:00
#if defined(CONFIG_MODULES) && defined(CONFIG_SYSFS)
Driver core: move the driver specific module code into the driver core The module driver specific code should belong in the driver core, not in the kernel/ directory. So move this code. This is done in preparation for some struct device_driver rework that should be confined to the driver core code only. This also lets us keep from exporting these functions, as no external code should ever be calling it. Thanks to Andrew Morton for the !CONFIG_MODULES fix. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 21:23:18 +01:00
extern void module_add_driver(struct module *mod, struct device_driver *drv);
extern void module_remove_driver(struct device_driver *drv);
#else
static inline void module_add_driver(struct module *mod,
struct device_driver *drv) { }
static inline void module_remove_driver(struct device_driver *drv) { }
#endif
Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev Devtmpfs lets the kernel create a tmpfs instance called devtmpfs very early at kernel initialization, before any driver-core device is registered. Every device with a major/minor will provide a device node in devtmpfs. Devtmpfs can be changed and altered by userspace at any time, and in any way needed - just like today's udev-mounted tmpfs. Unmodified udev versions will run just fine on top of it, and will recognize an already existing kernel-created device node and use it. The default node permissions are root:root 0600. Proper permissions and user/group ownership, meaningful symlinks, all other policy still needs to be applied by userspace. If a node is created by devtmps, devtmpfs will remove the device node when the device goes away. If the device node was created by userspace, or the devtmpfs created node was replaced by userspace, it will no longer be removed by devtmpfs. If it is requested to auto-mount it, it makes init=/bin/sh work without any further userspace support. /dev will be fully populated and dynamic, and always reflect the current device state of the kernel. With the commonly used dynamic device numbers, it solves the problem where static devices nodes may point to the wrong devices. It is intended to make the initial bootup logic simpler and more robust, by de-coupling the creation of the inital environment, to reliably run userspace processes, from a complex userspace bootstrap logic to provide a working /dev. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Tested-By: Harald Hoyer <harald@redhat.com> Tested-By: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 15:23:42 +02:00
#ifdef CONFIG_DEVTMPFS
extern int devtmpfs_init(void);
#else
static inline int devtmpfs_init(void) { return 0; }
#endif
driver core: Functional dependencies tracking support Currently, there is a problem with taking functional dependencies between devices into account. What I mean by a "functional dependency" is when the driver of device B needs device A to be functional and (generally) its driver to be present in order to work properly. This has certain consequences for power management (suspend/resume and runtime PM ordering) and shutdown ordering of these devices. In general, it also implies that the driver of A needs to be working for B to be probed successfully and it cannot be unbound from the device before the B's driver. Support for representing those functional dependencies between devices is added here to allow the driver core to track them and act on them in certain cases where applicable. The argument for doing that in the driver core is that there are quite a few distinct use cases involving device dependencies, they are relatively hard to get right in a driver (if one wants to address all of them properly) and it only gets worse if multiplied by the number of drivers potentially needing to do it. Morever, at least one case (asynchronous system suspend/resume) cannot be handled in a single driver at all, because it requires the driver of A to wait for B to suspend (during system suspend) and the driver of B to wait for A to resume (during system resume). For this reason, represent dependencies between devices as "links", with the help of struct device_link objects each containing pointers to the "linked" devices, a list node for each of them, status information, flags, and an RCU head for synchronization. Also add two new list heads, representing the lists of links to the devices that depend on the given one (consumers) and to the devices depended on by it (suppliers), and a "driver presence status" field (needed for figuring out initial states of device links) to struct device. The entire data structure consisting of all of the lists of link objects for all devices is protected by a mutex (for link object addition/removal and for list walks during device driver probing and removal) and by SRCU (for list walking in other case that will be introduced by subsequent change sets). If CONFIG_SRCU is not selected, however, an rwsem is used for protecting the entire data structure. In addition, each link object has an internal status field whose value reflects whether or not drivers are bound to the devices pointed to by the link or probing/removal of their drivers is in progress etc. That field is only modified under the device links mutex, but it may be read outside of it in some cases (introduced by subsequent change sets), so modifications of it are annotated with WRITE_ONCE(). New links are added by calling device_link_add() which takes three arguments: pointers to the devices in question and flags. In particular, if DL_FLAG_STATELESS is set in the flags, the link status is not to be taken into account for this link and the driver core will not manage it. In turn, if DL_FLAG_AUTOREMOVE is set in the flags, the driver core will remove the link automatically when the consumer device driver unbinds from it. One of the actions carried out by device_link_add() is to reorder the lists used for device shutdown and system suspend/resume to put the consumer device along with all of its children and all of its consumers (and so on, recursively) to the ends of those lists in order to ensure the right ordering between all of the supplier and consumer devices. For this reason, it is not possible to create a link between two devices if the would-be supplier device already depends on the would-be consumer device as either a direct descendant of it or a consumer of one of its direct descendants or one of its consumers and so on. There are two types of link objects, persistent and non-persistent. The persistent ones stay around until one of the target devices is deleted, while the non-persistent ones are removed automatically when the consumer driver unbinds from its device (ie. they are assumed to be valid only as long as the consumer device has a driver bound to it). Persistent links are created by default and non-persistent links are created when the DL_FLAG_AUTOREMOVE flag is passed to device_link_add(). Both persistent and non-persistent device links can be deleted with an explicit call to device_link_del(). Links created without the DL_FLAG_STATELESS flag set are managed by the driver core using a simple state machine. There are 5 states each link can be in: DORMANT (unused), AVAILABLE (the supplier driver is present and functional), CONSUMER_PROBE (the consumer driver is probing), ACTIVE (both supplier and consumer drivers are present and functional), and SUPPLIER_UNBIND (the supplier driver is unbinding). The driver core updates the link state automatically depending on what happens to the linked devices and for each link state specific actions are taken in addition to that. For example, if the supplier driver unbinds from its device, the driver core will also unbind the drivers of all of its consumers automatically under the assumption that they cannot function properly without the supplier. Analogously, the driver core will only allow the consumer driver to bind to its device if the supplier driver is present and functional (ie. the link is in the AVAILABLE state). If that's not the case, it will rely on the existing deferred probing mechanism to wait for the supplier driver to become available. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-30 17:32:16 +01:00
/* Device links support */
extern int device_links_read_lock(void);
extern void device_links_read_unlock(int idx);
extern int device_links_check_suppliers(struct device *dev);
extern void device_links_driver_bound(struct device *dev);
extern void device_links_driver_cleanup(struct device *dev);
extern void device_links_no_driver(struct device *dev);
extern bool device_links_busy(struct device *dev);
extern void device_links_unbind_consumers(struct device *dev);
PM / core: fix deferred probe breaking suspend resume order When bridge and its endpoint is enumerated the devices are added to the dpm list. Afterward, the bridge defers probe when IOMMU is not ready. This causes the bridge to be moved to the end of the dpm list when deferred probe kicks in. The order of the dpm list for bridge and endpoint is reversed. Add reordering code to move the bridge and its children and consumers to the end of the pm list so the order for suspend and resume is not altered. The code also move device and its children and consumers to the tail of device_kset list if it is registered. Signed-off-by: Toan Le <toanle@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-11 01:57:06 +02:00
/* device pm support */
void device_pm_move_to_tail(struct device *dev);