linux/arch/arm/mm/proc-arm6_7.S

324 lines
8.8 KiB
ArmAsm
Raw Normal View History

/*
* linux/arch/arm/mm/proc-arm6,7.S
*
* Copyright (C) 1997-2000 Russell King
* hacked for non-paged-MM by Hyok S. Choi, 2003.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* These are the low level assembler for performing cache and TLB
* functions on the ARM610 & ARM710.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
ENTRY(cpu_arm6_dcache_clean_area)
ENTRY(cpu_arm7_dcache_clean_area)
mov pc, lr
/*
* Function: arm6_7_data_abort ()
*
* Params : r2 = pt_regs
* : r4 = aborted context pc
* : r5 = aborted context psr
*
* Purpose : obtain information about current aborted instruction
*
* Returns : r4-r5, r10-r11, r13 preserved
*/
ENTRY(cpu_arm7_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
ldr r8, [r4] @ read arm instruction
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #15 << 24
add pc, pc, r7, lsr #22 @ Now branch to the relevant processing routine
nop
/* 0 */ b .data_unknown
/* 1 */ b do_DataAbort @ swp
/* 2 */ b .data_unknown
/* 3 */ b .data_unknown
/* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m
/* 5 */ b .data_arm_lateldrpreconst @ ldr rd, [rn, #m]
/* 6 */ b .data_arm_lateldrpostreg @ ldr rd, [rn], rm
/* 7 */ b .data_arm_lateldrprereg @ ldr rd, [rn, rm]
/* 8 */ b .data_arm_ldmstm @ ldm*a rn, <rlist>
/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist>
/* a */ b .data_unknown
/* b */ b .data_unknown
/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
/* d */ b do_DataAbort @ ldc rd, [rn, #m]
/* e */ b .data_unknown
/* f */
.data_unknown: @ Part of jumptable
mov r0, r4
mov r1, r8
b baddataabort
ENTRY(cpu_arm6_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
ldr r8, [r4] @ read arm instruction
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #14 << 24
teq r7, #8 << 24 @ was it ldm/stm
bne do_DataAbort
.data_arm_ldmstm:
tst r8, #1 << 21 @ check writeback bit
beq do_DataAbort @ no writeback -> no fixup
mov r7, #0x11
orr r7, r7, #0x1100
and r6, r8, r7
and r9, r8, r7, lsl #1
add r6, r6, r9, lsr #1
and r9, r8, r7, lsl #2
add r6, r6, r9, lsr #2
and r9, r8, r7, lsl #3
add r6, r6, r9, lsr #3
add r6, r6, r6, lsr #8
add r6, r6, r6, lsr #4
and r6, r6, #15 @ r6 = no. of registers to transfer.
and r9, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [r2, r9, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6, lsl #2 @ Undo increment
addeq r7, r7, r6, lsl #2 @ Undo decrement
str r7, [r2, r9, lsr #14] @ Put register 'Rn'
b do_DataAbort
.data_arm_apply_r6_and_rn:
and r9, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [r2, r9, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6 @ Undo incrmenet
addeq r7, r7, r6 @ Undo decrement
str r7, [r2, r9, lsr #14] @ Put register 'Rn'
b do_DataAbort
.data_arm_lateldrpreconst:
tst r8, #1 << 21 @ check writeback bit
beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostconst:
movs r6, r8, lsl #20 @ Get offset
beq do_DataAbort @ zero -> no fixup
and r9, r8, #15 << 16 @ Extract 'n' from instruction
ldr r7, [r2, r9, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6, lsr #20 @ Undo increment
addeq r7, r7, r6, lsr #20 @ Undo decrement
str r7, [r2, r9, lsr #14] @ Put register 'Rn'
b do_DataAbort
.data_arm_lateldrprereg:
tst r8, #1 << 21 @ check writeback bit
beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostreg:
and r7, r8, #15 @ Extract 'm' from instruction
ldr r6, [r2, r7, lsl #2] @ Get register 'Rm'
mov r9, r8, lsr #7 @ get shift count
ands r9, r9, #31
and r7, r8, #0x70 @ get shift type
orreq r7, r7, #8 @ shift count = 0
add pc, pc, r7
nop
mov r6, r6, lsl r9 @ 0: LSL #!0
b .data_arm_apply_r6_and_rn
b .data_arm_apply_r6_and_rn @ 1: LSL #0
nop
b .data_unknown @ 2: MUL?
nop
b .data_unknown @ 3: MUL?
nop
mov r6, r6, lsr r9 @ 4: LSR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, lsr #32 @ 5: LSR #32
b .data_arm_apply_r6_and_rn
b .data_unknown @ 6: MUL?
nop
b .data_unknown @ 7: MUL?
nop
mov r6, r6, asr r9 @ 8: ASR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, asr #32 @ 9: ASR #32
b .data_arm_apply_r6_and_rn
b .data_unknown @ A: MUL?
nop
b .data_unknown @ B: MUL?
nop
mov r6, r6, ror r9 @ C: ROR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, rrx @ D: RRX
b .data_arm_apply_r6_and_rn
b .data_unknown @ E: MUL?
nop
b .data_unknown @ F: MUL?
/*
* Function: arm6_7_proc_init (void)
* : arm6_7_proc_fin (void)
*
* Notes : This processor does not require these
*/
ENTRY(cpu_arm6_proc_init)
ENTRY(cpu_arm7_proc_init)
mov pc, lr
ENTRY(cpu_arm6_proc_fin)
ENTRY(cpu_arm7_proc_fin)
mov r0, #0x31 @ ....S..DP...M
mcr p15, 0, r0, c1, c0, 0 @ disable caches
mov pc, lr
ENTRY(cpu_arm6_do_idle)
ENTRY(cpu_arm7_do_idle)
mov pc, lr
/*
* Function: arm6_7_switch_mm(unsigned long pgd_phys)
* Params : pgd_phys Physical address of page table
* Purpose : Perform a task switch, saving the old processes state, and restoring
* the new.
*/
ENTRY(cpu_arm6_switch_mm)
ENTRY(cpu_arm7_switch_mm)
#ifdef CONFIG_MMU
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
mcr p15, 0, r0, c2, c0, 0 @ update page table ptr
mcr p15, 0, r1, c5, c0, 0 @ flush TLBs
#endif
mov pc, lr
/*
* Function: arm6_7_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext)
* Params : r0 = Address to set
* : r1 = value to set
* Purpose : Set a PTE and flush it out of any WB cache
*/
.align 5
ENTRY(cpu_arm6_set_pte_ext)
ENTRY(cpu_arm7_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext wc_disable=0
#endif /* CONFIG_MMU */
mov pc, lr
/*
* Function: _arm6_7_reset
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
ENTRY(cpu_arm6_reset)
ENTRY(cpu_arm7_reset)
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ flush cache
#ifdef CONFIG_MMU
mcr p15, 0, r1, c5, c0, 0 @ flush TLB
#endif
mov r1, #0x30
mcr p15, 0, r1, c1, c0, 0 @ turn off MMU etc
mov pc, r0
__CPUINIT
.type __arm6_setup, #function
__arm6_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
#ifdef CONFIG_MMU
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mov r0, #0x3d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0011 1101
#else
mov r0, #0x3c @ . ..RS BLDP WCA.
#endif
mov pc, lr
.size __arm6_setup, . - __arm6_setup
.type __arm7_setup, #function
__arm7_setup: mov r0, #0
mcr p15, 0, r0, c7, c0 @ flush caches on v3
#ifdef CONFIG_MMU
mcr p15, 0, r0, c5, c0 @ flush TLBs on v3
mcr p15, 0, r0, c3, c0 @ load domain access register
mov r0, #0x7d @ . ..RS BLDP WCAM
orr r0, r0, #0x100 @ . ..01 0111 1101
#else
mov r0, #0x7c @ . ..RS BLDP WCA.
#endif
mov pc, lr
.size __arm7_setup, . - __arm7_setup
__INITDATA
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions arm6, dabort=cpu_arm6_data_abort, pabort=legacy_pabort
define_processor_functions arm7, dabort=cpu_arm7_data_abort, pabort=legacy_pabort
.section ".rodata"
string cpu_arch_name, "armv3"
string cpu_elf_name, "v3"
string cpu_arm6_name, "ARM6"
string cpu_arm610_name, "ARM610"
string cpu_arm7_name, "ARM7"
string cpu_arm710_name, "ARM710"
.align
.section ".proc.info.init", #alloc, #execinstr
.macro arm67_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \
cpu_mm_mmu_flags:req, cpu_flush:req, cpu_proc_funcs:req
.type __\name\()_proc_info, #object
__\name\()_proc_info:
.long \cpu_val
.long \cpu_mask
.long \cpu_mm_mmu_flags
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b \cpu_flush
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
.long \cpu_name
.long \cpu_proc_funcs
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
.size __\name\()_proc_info, . - __\name\()_proc_info
.endm
arm67_proc_info arm6, 0x41560600, 0xfffffff0, cpu_arm6_name, \
0x00000c1e, __arm6_setup, arm6_processor_functions
arm67_proc_info arm610, 0x41560610, 0xfffffff0, cpu_arm610_name, \
0x00000c1e, __arm6_setup, arm6_processor_functions
arm67_proc_info arm7, 0x41007000, 0xffffff00, cpu_arm7_name, \
0x00000c1e, __arm7_setup, arm7_processor_functions
arm67_proc_info arm710, 0x41007100, 0xfff8ff00, cpu_arm710_name, \
PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ, \
__arm7_setup, arm7_processor_functions