OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
fd3e0bbc60
linux/arch/powerpc/kernel/head_64.S

1564 lines
39 KiB
ArmAsm
Raw Normal View History

powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
* Adapted for Power Macintosh by Paul Mackerras.
* Low-level exception handlers and MMU support
* rewritten by Paul Mackerras.
* Copyright (C) 1996 Paul Mackerras.
*
* Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
* Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
*
* This file contains the low-level support and setup for the
* PowerPC-64 platform, including trap and interrupt dispatch.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/threads.h>
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
#include <asm/reg.h>
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/bug.h>
#include <asm/cputable.h>
#include <asm/setup.h>
#include <asm/hvcall.h>
merge filename and modify references to iseries/lpar_map.h Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 05:02:47 +01:00
#include <asm/iseries/lpar_map.h>
[PATCH] powerpc: Merge thread_info.h Merge ppc32 and ppc64 versions of thread_info.h. They were pretty similar already, the chief changes are: - Instead of inline asm to implement current_thread_info(), which needs to be different for ppc32 and ppc64, we use C with an asm("r1") register variable. gcc turns it into the same asm as we used to have for both platforms. - We replace ppc32's 'local_flags' with the ppc64 'syscall_noerror' field. The noerror flag was in fact the only thing in the local_flags field anyway, so the ppc64 approach is simpler, and means we only need a load-immediate/store instead of load/mask/store when clearing the flag. - In readiness for 64k pages, when THREAD_SIZE will be less than a page, ppc64 used kmalloc() rather than get_free_pages() to allocate the kernel stack. With this patch we do the same for ppc32, since there's no strong reason not to. - For ppc64, we no longer export THREAD_SHIFT and THREAD_SIZE via asm-offsets, thread_info.h can now be safely included in asm, as on ppc32. Built and booted on G4 Powerbook (ARCH=ppc and ARCH=powerpc) and Power5 (ARCH=ppc64 and ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21 07:45:50 +02:00
#include <asm/thread_info.h>
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 10:19:00 +02:00
#include <asm/firmware.h>
[POWERPC] iSeries: Clean up lparmap mess We need to have xLparMap in head_64.S so that it is at a fixed address (because the linker will not resolve (address & 0xffffffff) for us). But the assembler miscalculates the KERNEL_VSID() expressions. So put the confusing expressions into asm-offsets.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-20 06:58:36 +02:00
#include <asm/page_64.h>
[POWERPC] Move the exception macros into a header file It makes head_64.S a bit more readable and will allow us to move the iSeries exceptions elsewhere. This also removes the last line of the comment: * The following macros define the code that appears as * the prologue to each of the exception handlers. They * are split into two parts to allow a single kernel binary * to be used for pSeries and iSeries. * LOL. One day... - paulus Anything is possible. :-) Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 05:46:44 +02:00
#include <asm/exception.h>
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#define DO_SOFT_DISABLE
/*
* We layout physical memory as follows:
* 0x0000 - 0x00ff : Secondary processor spin code
* 0x0100 - 0x2fff : pSeries Interrupt prologs
* 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
* 0x6000 - 0x6fff : Initial (CPU0) segment table
* 0x7000 - 0x7fff : FWNMI data area
* 0x8000 - : Early init and support code
*/
/*
* SPRG Usage
*
* Register Definition
*
* SPRG0 reserved for hypervisor
* SPRG1 temp - used to save gpr
* SPRG2 temp - used to save gpr
* SPRG3 virt addr of paca
*/
/*
* Entering into this code we make the following assumptions:
* For pSeries:
* 1. The MMU is off & open firmware is running in real mode.
* 2. The kernel is entered at __start
*
* For iSeries:
* 1. The MMU is on (as it always is for iSeries)
* 2. The kernel is entered at system_reset_iSeries
*/
.text
.globl _stext
_stext:
_GLOBAL(__start)
/* NOP this out unconditionally */
BEGIN_FTR_SECTION
powerpc: Define 32/64 bit asm macros and use them in fpu.S These macros help in writing assembly code that works for both ppc32 and ppc64. With this we now have a common fpu.S. This takes out load_up_fpu from head_64.S. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06 02:59:19 +02:00
b .__start_initialization_multiplatform
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
END_FTR_SECTION(0, 1)
/* Catch branch to 0 in real mode */
trap
/* Secondary processors spin on this value until it goes to 1. */
.globl __secondary_hold_spinloop
__secondary_hold_spinloop:
.llong 0x0
/* Secondary processors write this value with their cpu # */
/* after they enter the spin loop immediately below. */
.globl __secondary_hold_acknowledge
__secondary_hold_acknowledge:
.llong 0x0
[POWERPC] Remove remaining iSeries debugger cruft None of this seems to be necessary, so let's see if can remove it and not break anything. Booted on iSeries & pSeries here. NB. we don't remove the hvReleaseData, we just move it down so that the file reads more clearly. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-23 10:15:37 +02:00
#ifdef CONFIG_PPC_ISERIES
/*
* At offset 0x20, there is a pointer to iSeries LPAR data.
* This is required by the hypervisor
*/
. = 0x20
.llong hvReleaseData-KERNELBASE
#endif /* CONFIG_PPC_ISERIES */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
. = 0x60
/*
[POWERPC] Correct __secondary_hold comment Remove references to pSeries and OpenFirmware in the __secondary_hold usage comment. __secondary_hold is a generic routine and can be used by other platforms. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-16 00:06:23 +02:00
* The following code is used to hold secondary processors
* in a spin loop after they have entered the kernel, but
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
* before the bulk of the kernel has been relocated. This code
* is relocated to physical address 0x60 before prom_init is run.
* All of it must fit below the first exception vector at 0x100.
*/
_GLOBAL(__secondary_hold)
mfmsr r24
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
[PATCH] powerpc64: remove broken/bitrotted HMT support HMT support is currently broken and needs to be reworked to play nicely with the SMT scheduler. Remove the bit rotten bits for the time being. I also updated an incorrect comment, we enter __secondary_hold with the physical cpu id in r3. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-13 08:11:13 +01:00
/* Grab our physical cpu number */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mr r24,r3
/* Tell the master cpu we're here */
/* Relocation is off & we are located at an address less */
/* than 0x100, so only need to grab low order offset. */
std r24,__secondary_hold_acknowledge@l(0)
sync
/* All secondary cpus wait here until told to start. */
100: ld r4,__secondary_hold_spinloop@l(0)
cmpdi 0,r4,1
bne 100b
[PATCH] powerpc64: remove broken/bitrotted HMT support HMT support is currently broken and needs to be reworked to play nicely with the SMT scheduler. Remove the bit rotten bits for the time being. I also updated an incorrect comment, we enter __secondary_hold with the physical cpu id in r3. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-13 08:11:13 +01:00
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 07:07:08 +02:00
LOAD_REG_IMMEDIATE(r4, .generic_secondary_smp_init)
[PATCH] powerpc: Fixups for kernel linked at 32 MB There's a few places where we need to fix things up for the kernel to work if it's linked at 32MB: - platforms/powermac/smp.c To start secondary cpus on pmac we patch the reset vector, which is fine. Except if we're above 32MB we don't have enough bits for an absolute branch, it needs to relative. - kernel/head_64.s - A few branches in the cpu hold code need to load the full target address and do a bctr. - after_prom_start needs to load PHYSICAL_START as the dest address, not 0. - The exception prolog needs to load the low word of the target adddress, not just the low halfword. - Fixup handling of the initial stab address. - kernel/setup_64.c smp_release_cpus() needs to write 1 to the spinloop flag near 0, not 32 MB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-05 22:49:00 +01:00
mtctr r4
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mr r3,r24
[PATCH] powerpc: Fixups for kernel linked at 32 MB There's a few places where we need to fix things up for the kernel to work if it's linked at 32MB: - platforms/powermac/smp.c To start secondary cpus on pmac we patch the reset vector, which is fine. Except if we're above 32MB we don't have enough bits for an absolute branch, it needs to relative. - kernel/head_64.s - A few branches in the cpu hold code need to load the full target address and do a bctr. - after_prom_start needs to load PHYSICAL_START as the dest address, not 0. - The exception prolog needs to load the low word of the target adddress, not just the low halfword. - Fixup handling of the initial stab address. - kernel/setup_64.c smp_release_cpus() needs to write 1 to the spinloop flag near 0, not 32 MB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-05 22:49:00 +01:00
bctr
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#else
BUG_OPCODE
#endif
/* This value is used to mark exception frames on the stack. */
.section ".toc","aw"
exception_marker:
.tc ID_72656773_68657265[TC],0x7265677368657265
.text
/*
* This is the start of the interrupt handlers for pSeries
* This code runs with relocation off.
*/
. = 0x100
.globl __start_interrupts
__start_interrupts:
STD_EXCEPTION_PSERIES(0x100, system_reset)
. = 0x200
_machine_check_pSeries:
HMT_MEDIUM
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SPRG1,r13 /* save r13 */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
. = 0x300
.globl data_access_pSeries
data_access_pSeries:
HMT_MEDIUM
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SPRG1,r13
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
BEGIN_FTR_SECTION
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SPRG2,r12
mfspr r13,SPRN_DAR
mfspr r12,SPRN_DSISR
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
srdi r13,r13,60
rlwimi r13,r12,16,0x20
mfcr r12
cmpwi r13,0x2c
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
beq do_stab_bolted_pSeries
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mtcrf 0x80,r12
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r12,SPRN_SPRG2
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
. = 0x380
.globl data_access_slb_pSeries
data_access_slb_pSeries:
HMT_MEDIUM
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SPRG1,r13
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_DAR
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
mfcr r9
#ifdef __DISABLED__
/* Keep that around for when we re-implement dynamic VSIDs */
cmpdi r3,0
bge slb_miss_user_pseries
#endif /* __DISABLED__ */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
mfspr r10,SPRN_SPRG1
std r10,PACA_EXSLB+EX_R13(r13)
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r12,SPRN_SRR1 /* and SRR1 */
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
b .slb_miss_realmode /* Rel. branch works in real mode */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
STD_EXCEPTION_PSERIES(0x400, instruction_access)
. = 0x480
.globl instruction_access_slb_pSeries
instruction_access_slb_pSeries:
HMT_MEDIUM
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SPRG1,r13
mfspr r13,SPRN_SPRG3 /* get paca address into r13 */
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
mfcr r9
#ifdef __DISABLED__
/* Keep that around for when we re-implement dynamic VSIDs */
cmpdi r3,0
bge slb_miss_user_pseries
#endif /* __DISABLED__ */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
std r10,PACA_EXSLB+EX_R10(r13)
std r11,PACA_EXSLB+EX_R11(r13)
std r12,PACA_EXSLB+EX_R12(r13)
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
mfspr r10,SPRN_SPRG1
std r10,PACA_EXSLB+EX_R13(r13)
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r12,SPRN_SRR1 /* and SRR1 */
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
b .slb_miss_realmode /* Rel. branch works in real mode */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
[POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:47:49 +02:00
MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
STD_EXCEPTION_PSERIES(0x600, alignment)
STD_EXCEPTION_PSERIES(0x700, program_check)
STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
[POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:47:49 +02:00
MASKABLE_EXCEPTION_PSERIES(0x900, decrementer)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
STD_EXCEPTION_PSERIES(0xa00, trap_0a)
STD_EXCEPTION_PSERIES(0xb00, trap_0b)
. = 0xc00
.globl system_call_pSeries
system_call_pSeries:
HMT_MEDIUM
mr r9,r13
mfmsr r10
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r13,SPRN_SPRG3
mfspr r11,SPRN_SRR0
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
clrrdi r12,r13,32
oris r12,r12,system_call_common@h
ori r12,r12,system_call_common@l
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SRR0,r12
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
ori r10,r10,MSR_IR|MSR_DR|MSR_RI
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r12,SPRN_SRR1
mtspr SPRN_SRR1,r10
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
rfid
b . /* prevent speculative execution */
STD_EXCEPTION_PSERIES(0xd00, single_step)
STD_EXCEPTION_PSERIES(0xe00, trap_0e)
/* We need to deal with the Altivec unavailable exception
* here which is at 0xf20, thus in the middle of the
* prolog code of the PerformanceMonitor one. A little
* trickery is thus necessary
*/
. = 0xf00
b performance_monitor_pSeries
STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable)
[POWERPC] cell: add RAS support This is a first version of support for the Cell BE "Reliability, Availability and Serviceability" features. It doesn't yet handle some of the RAS interrupts (the ones described in iic_is/iic_irr), I'm still working on a proper way to expose these. They are essentially a cascaded controller by themselves (sic !) though I may just handle them locally to the iic driver. I need also to sync with David Erb on the way he hooked in the performance monitor interrupt. So that's all for 2.6.17 and I'll do more work on that with my rework of the powerpc interrupt layer that I'm hacking on at the moment. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-19 20:33:16 +02:00
#ifdef CONFIG_CBE_RAS
HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
#endif /* CONFIG_CBE_RAS */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
[POWERPC] cell: add RAS support This is a first version of support for the Cell BE "Reliability, Availability and Serviceability" features. It doesn't yet handle some of the RAS interrupts (the ones described in iic_is/iic_irr), I'm still working on a proper way to expose these. They are essentially a cascaded controller by themselves (sic !) though I may just handle them locally to the iic driver. I need also to sync with David Erb on the way he hooked in the performance monitor interrupt. So that's all for 2.6.17 and I'll do more work on that with my rework of the powerpc interrupt layer that I'm hacking on at the moment. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-19 20:33:16 +02:00
#ifdef CONFIG_CBE_RAS
HSTD_EXCEPTION_PSERIES(0x1600, cbe_maintenance)
#endif /* CONFIG_CBE_RAS */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
[POWERPC] cell: add RAS support This is a first version of support for the Cell BE "Reliability, Availability and Serviceability" features. It doesn't yet handle some of the RAS interrupts (the ones described in iic_is/iic_irr), I'm still working on a proper way to expose these. They are essentially a cascaded controller by themselves (sic !) though I may just handle them locally to the iic driver. I need also to sync with David Erb on the way he hooked in the performance monitor interrupt. So that's all for 2.6.17 and I'll do more work on that with my rework of the powerpc interrupt layer that I'm hacking on at the moment. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-19 20:33:16 +02:00
#ifdef CONFIG_CBE_RAS
HSTD_EXCEPTION_PSERIES(0x1800, cbe_thermal)
#endif /* CONFIG_CBE_RAS */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
. = 0x3000
/*** pSeries interrupt support ***/
/* moved from 0xf00 */
[POWERPC] Fix performance monitor exception To the issue: some point during 2.6.20 development, Paul Mackerras introduced the "lazy IRQ disabling" patch (very cool work, BTW). In that patch, the performance monitor unit exception was marked as "maskable", in the sense that if interrupts were soft-disabled, that exception could be ignored. This broke my PowerPC profiling code. The symptom that I see is that a varying number of interrupts (from 0 to $n$, typically closer to 0) get delivered, when, in reality, it should always be very close to $n$. The issue stems from the way masking is being done. Masking in this fashion seems to work well with the decrementer and external interrupts, because they are raised again until "really" handled. For the PMU, however, this does not apply (at least on my Xserver machine with a 970FX processor). If the PMU exception is not handled, it will _not_ be re-raised (at least on my machine). The documentation states that the PMXE bit in MMCR0 is set to 0 when the PMU exception is raised. However, software must re-set the bit to re-enable PMU exceptions. If the exception is ignored (as currently) not only is that interrupt lost, but because software does not re-set PMXE, the PMU registers are "frozen" forever. [This patch means that performance monitor exceptions are taken and handled even if irqs are off, as long as some other interrupt hasn't come along and caused interrupts to be hard-disabled. In this sense the PMU exception becomes like an NMI. The oprofile code for most powerpc processors does nothing that is unsafe in an NMI context, but the Cell oprofile code does a spin_lock_irqsave. However, that turns out to be OK because Cell doesn't actually use the performance monitor exception; performance monitor interrupts come in as a regular interrupt on Cell, so will be disabled when irqs are off. -- paulus.] Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 02:51:36 +01:00
STD_EXCEPTION_PSERIES(., performance_monitor)
[POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:47:49 +02:00
/*
* An interrupt came in while soft-disabled; clear EE in SRR1,
* clear paca->hard_enabled and return.
*/
masked_interrupt:
stb r10,PACAHARDIRQEN(r13)
mtcrf 0x80,r9
ld r9,PACA_EXGEN+EX_R9(r13)
mfspr r10,SPRN_SRR1
rldicl r10,r10,48,1 /* clear MSR_EE */
rotldi r10,r10,16
mtspr SPRN_SRR1,r10
ld r10,PACA_EXGEN+EX_R10(r13)
mfspr r13,SPRN_SPRG1
rfid
b .
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
.align 7
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
do_stab_bolted_pSeries:
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mtcrf 0x80,r12
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r12,SPRN_SPRG2
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
/*
* We have some room here we use that to put
* the peries slb miss user trampoline code so it's reasonably
* away from slb_miss_user_common to avoid problems with rfid
*
* This is used for when the SLB miss handler has to go virtual,
* which doesn't happen for now anymore but will once we re-implement
* dynamic VSIDs for shared page tables
*/
#ifdef __DISABLED__
slb_miss_user_pseries:
std r10,PACA_EXGEN+EX_R10(r13)
std r11,PACA_EXGEN+EX_R11(r13)
std r12,PACA_EXGEN+EX_R12(r13)
mfspr r10,SPRG1
ld r11,PACA_EXSLB+EX_R9(r13)
ld r12,PACA_EXSLB+EX_R3(r13)
std r10,PACA_EXGEN+EX_R13(r13)
std r11,PACA_EXGEN+EX_R9(r13)
std r12,PACA_EXGEN+EX_R3(r13)
clrrdi r12,r13,32
mfmsr r10
mfspr r11,SRR0 /* save SRR0 */
ori r12,r12,slb_miss_user_common@l /* virt addr of handler */
ori r10,r10,MSR_IR|MSR_DR|MSR_RI
mtspr SRR0,r12
mfspr r12,SRR1 /* and SRR1 */
mtspr SRR1,r10
rfid
b . /* prevent spec. execution */
#endif /* __DISABLED__ */
[POWERPC] FWNMI is only used on pSeries This saves 4k on non pSeries builds (except for iSeries where it saves almost 4k). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-18 09:25:12 +02:00
#ifdef CONFIG_PPC_PSERIES
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* Vectors for the FWNMI option. Share common code.
*/
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
.globl system_reset_fwnmi
[PATCH] powerpc: Create a trampoline for the fwnmi vectors The fwnmi vectors can be anywhere < 32 MB, so we need to use a trampoline for them. The kdump kernel will register the trampoline addresses, which will then jump up to the real code above 32 MB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-04 08:39:33 +01:00
.align 7
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
system_reset_fwnmi:
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
[POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs The firmware of POWER4 and JS20 systems does not switch the cpu to 64bit mode when the registered system_reset and machine_check handlers get called. If a 32bit process runs on that cpu at the time of the event, the cpu remains in 32bit mode. xmon and kdump can not deal with it, the result is an error like 'Bad kernel stack pointer fff2aad0 at 3200'. xmon just loses some register info, but booting the kdump kernel usually fails. Both handlers are not hot paths. Duplicate the EXCEPTION_PROLOG_PSERIES macro and add two instructions to switch to 64bit: li r11,5; rldimi r10,r11,61,0; Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-19 10:34:05 +02:00
EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXGEN, system_reset_common)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
.globl machine_check_fwnmi
[PATCH] powerpc: Create a trampoline for the fwnmi vectors The fwnmi vectors can be anywhere < 32 MB, so we need to use a trampoline for them. The kdump kernel will register the trampoline addresses, which will then jump up to the real code above 32 MB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-04 08:39:33 +01:00
.align 7
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
machine_check_fwnmi:
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
HMT_MEDIUM
mtspr SPRN_SPRG1,r13 /* save r13 */
[POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs The firmware of POWER4 and JS20 systems does not switch the cpu to 64bit mode when the registered system_reset and machine_check handlers get called. If a 32bit process runs on that cpu at the time of the event, the cpu remains in 32bit mode. xmon and kdump can not deal with it, the result is an error like 'Bad kernel stack pointer fff2aad0 at 3200'. xmon just loses some register info, but booting the kdump kernel usually fails. Both handlers are not hot paths. Duplicate the EXCEPTION_PROLOG_PSERIES macro and add two instructions to switch to 64bit: li r11,5; rldimi r10,r11,61,0; Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-19 10:34:05 +02:00
EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
[POWERPC] FWNMI is only used on pSeries This saves 4k on non pSeries builds (except for iSeries where it saves almost 4k). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-18 09:25:12 +02:00
#endif /* CONFIG_PPC_PSERIES */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*** Common interrupt handlers ***/
STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
/*
* Machine check is different because we use a different
* save area: PACA_EXMC instead of PACA_EXGEN.
*/
.align 7
.globl machine_check_common
machine_check_common:
EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
powerpc: Use correct sequence for putting CPU into nap mode We weren't using the recommended sequence for putting the CPU into nap mode. When I changed the idle loop, for some reason 7447A cpus started hanging when we put them into nap mode. Changing to the recommended sequence fixes that. The complexity here is that the recommended sequence is a loop that keeps putting the cpu back into nap mode. Clearly we need some way to break out of the loop when an interrupt (external interrupt, decrementer, performance monitor) occurs. Here we use a bit in the thread_info struct to indicate that we need this, and the exception entry code notices this and arranges for the exception to return to the value in the link register, thus breaking out of the loop. We use a new `local_flags' field in the thread_info which we can alter without needing to use an atomic update sequence. The PPC970 has the same recommended sequence, so we do the same thing there too. This also fixes a bug in the kernel stack overflow handling code on 32-bit, since it was causing a value that we needed in a register to get trashed. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-18 13:49:11 +02:00
FINISH_NAP
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
DISABLE_INTS
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl .machine_check_exception
b .ret_from_except
STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
powerpc: Use correct sequence for putting CPU into nap mode We weren't using the recommended sequence for putting the CPU into nap mode. When I changed the idle loop, for some reason 7447A cpus started hanging when we put them into nap mode. Changing to the recommended sequence fixes that. The complexity here is that the recommended sequence is a loop that keeps putting the cpu back into nap mode. Clearly we need some way to break out of the loop when an interrupt (external interrupt, decrementer, performance monitor) occurs. Here we use a bit in the thread_info struct to indicate that we need this, and the exception entry code notices this and arranges for the exception to return to the value in the link register, thus breaking out of the loop. We use a new `local_flags' field in the thread_info which we can alter without needing to use an atomic update sequence. The PPC970 has the same recommended sequence, so we do the same thing there too. This also fixes a bug in the kernel stack overflow handling code on 32-bit, since it was causing a value that we needed in a register to get trashed. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-18 13:49:11 +02:00
STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
#ifdef CONFIG_ALTIVEC
STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
#else
STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
#endif
[POWERPC] cell: add RAS support This is a first version of support for the Cell BE "Reliability, Availability and Serviceability" features. It doesn't yet handle some of the RAS interrupts (the ones described in iic_is/iic_irr), I'm still working on a proper way to expose these. They are essentially a cascaded controller by themselves (sic !) though I may just handle them locally to the iic driver. I need also to sync with David Erb on the way he hooked in the performance monitor interrupt. So that's all for 2.6.17 and I'll do more work on that with my rework of the powerpc interrupt layer that I'm hacking on at the moment. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-19 20:33:16 +02:00
#ifdef CONFIG_CBE_RAS
STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
#endif /* CONFIG_CBE_RAS */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* Here we have detected that the kernel stack pointer is bad.
* R9 contains the saved CR, r13 points to the paca,
* r10 contains the (bad) kernel stack pointer,
* r11 and r12 contain the saved SRR0 and SRR1.
* We switch to using an emergency stack, save the registers there,
* and call kernel_bad_stack(), which panics.
*/
bad_stack:
ld r1,PACAEMERGSP(r13)
subi r1,r1,64+INT_FRAME_SIZE
std r9,_CCR(r1)
std r10,GPR1(r1)
std r11,_NIP(r1)
std r12,_MSR(r1)
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r11,SPRN_DAR
mfspr r12,SPRN_DSISR
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
std r11,_DAR(r1)
std r12,_DSISR(r1)
mflr r10
mfctr r11
mfxer r12
std r10,_LINK(r1)
std r11,_CTR(r1)
std r12,_XER(r1)
SAVE_GPR(0,r1)
SAVE_GPR(2,r1)
SAVE_4GPRS(3,r1)
SAVE_2GPRS(7,r1)
SAVE_10GPRS(12,r1)
SAVE_10GPRS(22,r1)
[POWERPC] Save trap number in bad_stack Save the trap number in the case of getting a bad stack in an exception handler. It is sometimes useful to know what exception it was that caused this to happen. Without this, no trap number is reported. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-23 17:11:55 +02:00
lhz r12,PACA_TRAP_SAVE(r13)
std r12,_TRAP(r1)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
addi r11,r1,INT_FRAME_SIZE
std r11,0(r1)
li r12,0
std r12,0(r11)
ld r2,PACATOC(r13)
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl .kernel_bad_stack
b 1b
/*
* Return from an exception with minimal checks.
* The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
* If interrupts have been enabled, or anything has been
* done that might have changed the scheduling status of
* any task or sent any task a signal, you should use
* ret_from_except or ret_from_except_lite instead of this.
*/
[POWERPC] Make sure interrupt enable gets restored properly The lazy IRQ disable patch missed a couple of places where the interrupt enable flags need to be restored correctly. First, we weren't restoring the paca->hard_enabled flag on interrupt exit. Instead of saving it on entry, we compute it from the MSR_EE bit in the MSR we are restoring at exit. Secondly, the MMU hash miss code was clearing both paca->soft_enabled and paca->hard_enabled but not restoring them in the case where hash_page was able to resolve the miss from the Linux page tables. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-18 02:11:22 +02:00
fast_exc_return_irq: /* restores irq state too */
ld r3,SOFTE(r1)
ld r12,_MSR(r1)
stb r3,PACASOFTIRQEN(r13) /* restore paca->soft_enabled */
rldicl r4,r12,49,63 /* get MSR_EE to LSB */
stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
b 1f
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:50:37 +02:00
.globl fast_exception_return
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
fast_exception_return:
ld r12,_MSR(r1)
[POWERPC] Make sure interrupt enable gets restored properly The lazy IRQ disable patch missed a couple of places where the interrupt enable flags need to be restored correctly. First, we weren't restoring the paca->hard_enabled flag on interrupt exit. Instead of saving it on entry, we compute it from the MSR_EE bit in the MSR we are restoring at exit. Secondly, the MMU hash miss code was clearing both paca->soft_enabled and paca->hard_enabled but not restoring them in the case where hash_page was able to resolve the miss from the Linux page tables. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-18 02:11:22 +02:00
1: ld r11,_NIP(r1)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
andi. r3,r12,MSR_RI /* check if RI is set */
beq- unrecov_fer
powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 00:06:59 +01:00
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
andi. r3,r12,MSR_PR
beq 2f
ACCOUNT_CPU_USER_EXIT(r3, r4)
2:
#endif
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
ld r3,_CCR(r1)
ld r4,_LINK(r1)
ld r5,_CTR(r1)
ld r6,_XER(r1)
mtcr r3
mtlr r4
mtctr r5
mtxer r6
REST_GPR(0, r1)
REST_8GPRS(2, r1)
mfmsr r10
[POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:47:49 +02:00
rldicl r10,r10,48,1 /* clear EE */
rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mtmsrd r10,1
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SRR1,r12
mtspr SPRN_SRR0,r11
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
REST_4GPRS(10, r1)
ld r1,GPR1(r1)
rfid
b . /* prevent speculative execution */
unrecov_fer:
bl .save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl .unrecoverable_exception
b 1b
/*
* Here r13 points to the paca, r9 contains the saved CR,
* SRR0 and SRR1 are saved in r11 and r12,
* r9 - r13 are saved in paca->exgen.
*/
.align 7
.globl data_access_common
data_access_common:
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r10,SPRN_DAR
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
std r10,PACA_EXGEN+EX_DAR(r13)
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r10,SPRN_DSISR
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
stw r10,PACA_EXGEN+EX_DSISR(r13)
EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
li r5,0x300
b .do_hash_page /* Try to handle as hpte fault */
.align 7
.globl instruction_access_common
instruction_access_common:
EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
ld r3,_NIP(r1)
andis. r4,r12,0x5820
li r5,0x400
b .do_hash_page /* Try to handle as hpte fault */
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
/*
* Here is the common SLB miss user that is used when going to virtual
* mode for SLB misses, that is currently not used
*/
#ifdef __DISABLED__
.align 7
.globl slb_miss_user_common
slb_miss_user_common:
mflr r10
std r3,PACA_EXGEN+EX_DAR(r13)
stw r9,PACA_EXGEN+EX_CCR(r13)
std r10,PACA_EXGEN+EX_LR(r13)
std r11,PACA_EXGEN+EX_SRR0(r13)
bl .slb_allocate_user
ld r10,PACA_EXGEN+EX_LR(r13)
ld r3,PACA_EXGEN+EX_R3(r13)
lwz r9,PACA_EXGEN+EX_CCR(r13)
ld r11,PACA_EXGEN+EX_SRR0(r13)
mtlr r10
beq- slb_miss_fault
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
beq- unrecov_user_slb
mfmsr r10
.machine push
.machine "power4"
mtcrf 0x80,r9
.machine pop
clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */
mtmsrd r10,1
mtspr SRR0,r11
mtspr SRR1,r12
ld r9,PACA_EXGEN+EX_R9(r13)
ld r10,PACA_EXGEN+EX_R10(r13)
ld r11,PACA_EXGEN+EX_R11(r13)
ld r12,PACA_EXGEN+EX_R12(r13)
ld r13,PACA_EXGEN+EX_R13(r13)
rfid
b .
slb_miss_fault:
EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
ld r4,PACA_EXGEN+EX_DAR(r13)
li r5,0
std r4,_DAR(r1)
std r5,_DSISR(r1)
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
b handle_page_fault
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
unrecov_user_slb:
EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
DISABLE_INTS
bl .save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl .unrecoverable_exception
b 1b
#endif /* __DISABLED__ */
/*
* r13 points to the PACA, r9 contains the saved CR,
* r12 contain the saved SRR1, SRR0 is still ready for return
* r3 has the faulting address
* r9 - r13 are saved in paca->exslb.
* r3 is saved in paca->slb_r3
* We assume we aren't going to take any exceptions during this procedure.
*/
_GLOBAL(slb_miss_realmode)
mflr r10
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
bl .slb_allocate_realmode
/* All done -- return from exception. */
ld r10,PACA_EXSLB+EX_LR(r13)
ld r3,PACA_EXSLB+EX_R3(r13)
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
#ifdef CONFIG_PPC_ISERIES
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 10:19:00 +02:00
BEGIN_FW_FTR_SECTION
[PATCH] powerpc: Remove lppaca structure from the PACA At present the lppaca - the structure shared with the iSeries hypervisor and phyp - is contained within the PACA, our own low-level per-cpu structure. This doesn't have to be so, the patch below removes it, making a separate array of lppaca structures. This saves approximately 500*NR_CPUS bytes of image size and kernel memory, because we don't need aligning gap between the Linux and hypervisor portions of every PACA. On the other hand it means an extra level of dereference in many accesses to the lppaca. The patch also gets rid of several places where we assign the paca address to a local variable for no particular reason. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 00:26:42 +01:00
ld r11,PACALPPACAPTR(r13)
ld r11,LPPACASRR0(r11) /* get SRR0 value */
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 10:19:00 +02:00
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
#endif /* CONFIG_PPC_ISERIES */
mtlr r10
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
[POWERPC] Fix handling of unrecoverable SLB miss interrupts If an SLB miss interrupt happens while the RI bit of MSR is zero, we can't just return, because RI being zero indicates that SRR0/SRR1 potentially had live values in them, and the process of taking an interrupt overwrites them. This should never happen, but if it does, we try to print a nice oops message. That doesn't work, however, because the code at unrecov_slb assumes that the MMU has been turned on, but we call it with the MMU off (and have done so since the SLB miss handler was rewritten to run without turning the MMU on) -- except on iSeries, where everything runs with the MMU on. This fixes it by adding the necessary code to turn the MMU on if necessary. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-14 05:59:02 +02:00
beq- 2f
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
.machine push
.machine "power4"
mtcrf 0x80,r9
mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
.machine pop
#ifdef CONFIG_PPC_ISERIES
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 10:19:00 +02:00
BEGIN_FW_FTR_SECTION
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 10:19:00 +02:00
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
#endif /* CONFIG_PPC_ISERIES */
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
ld r11,PACA_EXSLB+EX_R11(r13)
ld r12,PACA_EXSLB+EX_R12(r13)
ld r13,PACA_EXSLB+EX_R13(r13)
rfid
b . /* prevent speculative execution */
[POWERPC] Fix handling of unrecoverable SLB miss interrupts If an SLB miss interrupt happens while the RI bit of MSR is zero, we can't just return, because RI being zero indicates that SRR0/SRR1 potentially had live values in them, and the process of taking an interrupt overwrites them. This should never happen, but if it does, we try to print a nice oops message. That doesn't work, however, because the code at unrecov_slb assumes that the MMU has been turned on, but we call it with the MMU off (and have done so since the SLB miss handler was rewritten to run without turning the MMU on) -- except on iSeries, where everything runs with the MMU on. This fixes it by adding the necessary code to turn the MMU on if necessary. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-14 05:59:02 +02:00
2:
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
b unrecov_slb
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
mfspr r11,SPRN_SRR0
clrrdi r10,r13,32
LOAD_HANDLER(r10,unrecov_slb)
mtspr SPRN_SRR0,r10
mfmsr r10
ori r10,r10,MSR_IR|MSR_DR|MSR_RI
mtspr SPRN_SRR1,r10
rfid
b .
[PATCH] ppc64: support 64k pages Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 01:06:55 +01:00
unrecov_slb:
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
DISABLE_INTS
bl .save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl .unrecoverable_exception
b 1b
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
.align 7
.globl hardware_interrupt_common
.globl hardware_interrupt_entry
hardware_interrupt_common:
EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
powerpc: Use correct sequence for putting CPU into nap mode We weren't using the recommended sequence for putting the CPU into nap mode. When I changed the idle loop, for some reason 7447A cpus started hanging when we put them into nap mode. Changing to the recommended sequence fixes that. The complexity here is that the recommended sequence is a loop that keeps putting the cpu back into nap mode. Clearly we need some way to break out of the loop when an interrupt (external interrupt, decrementer, performance monitor) occurs. Here we use a bit in the thread_info struct to indicate that we need this, and the exception entry code notices this and arranges for the exception to return to the value in the link register, thus breaking out of the loop. We use a new `local_flags' field in the thread_info which we can alter without needing to use an atomic update sequence. The PPC970 has the same recommended sequence, so we do the same thing there too. This also fixes a bug in the kernel stack overflow handling code on 32-bit, since it was causing a value that we needed in a register to get trashed. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-18 13:49:11 +02:00
FINISH_NAP
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
hardware_interrupt_entry:
DISABLE_INTS
[POWERPC] Move lowlevel runlatch calls under cpu feature control There's no need to call the runlatch on functions on processors that don't implement them (CPU_FTR_CTRL). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-05 04:42:30 +02:00
BEGIN_FTR_SECTION
[PATCH] powerpc: Fix runlatch performance issues The runlatch SPR can take a lot of time to write. My original runlatch code would set it on every exception entry even though most of the time this was not required. It would also continually set it in the idle loop, which is an issue on an SMT capable processor. Now we cache the runlatch value in a threadinfo bit, and only check for it in decrementer and hardware interrupt exceptions as well as the idle loop. Boot on POWER3, POWER5 and iseries, and compile tested on pmac32. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-13 04:48:35 +01:00
bl .ppc64_runlatch_on
[POWERPC] Move lowlevel runlatch calls under cpu feature control There's no need to call the runlatch on functions on processors that don't implement them (CPU_FTR_CTRL). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-05 04:42:30 +02:00
END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_IRQ
b .ret_from_except_lite
powerpc: Use correct sequence for putting CPU into nap mode We weren't using the recommended sequence for putting the CPU into nap mode. When I changed the idle loop, for some reason 7447A cpus started hanging when we put them into nap mode. Changing to the recommended sequence fixes that. The complexity here is that the recommended sequence is a loop that keeps putting the cpu back into nap mode. Clearly we need some way to break out of the loop when an interrupt (external interrupt, decrementer, performance monitor) occurs. Here we use a bit in the thread_info struct to indicate that we need this, and the exception entry code notices this and arranges for the exception to return to the value in the link register, thus breaking out of the loop. We use a new `local_flags' field in the thread_info which we can alter without needing to use an atomic update sequence. The PPC970 has the same recommended sequence, so we do the same thing there too. This also fixes a bug in the kernel stack overflow handling code on 32-bit, since it was causing a value that we needed in a register to get trashed. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-18 13:49:11 +02:00
#ifdef CONFIG_PPC_970_NAP
power4_fixup_nap:
andc r9,r9,r10
std r9,TI_LOCAL_FLAGS(r11)
ld r10,_LINK(r1) /* make idle task do the */
std r10,_NIP(r1) /* equivalent of a blr */
blr
#endif
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
.align 7
.globl alignment_common
alignment_common:
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r10,SPRN_DAR
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
std r10,PACA_EXGEN+EX_DAR(r13)
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r10,SPRN_DSISR
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
stw r10,PACA_EXGEN+EX_DSISR(r13)
EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
std r3,_DAR(r1)
std r4,_DSISR(r1)
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
ENABLE_INTS
bl .alignment_exception
b .ret_from_except
.align 7
.globl program_check_common
program_check_common:
EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
ENABLE_INTS
bl .program_check_exception
b .ret_from_except
.align 7
.globl fp_unavailable_common
fp_unavailable_common:
EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
bne 1f /* if from user, just load it up */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
ENABLE_INTS
bl .kernel_fp_unavailable_exception
BUG_OPCODE
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
1: b .load_up_fpu
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
.align 7
.globl altivec_unavailable_common
altivec_unavailable_common:
EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
bne .load_up_altivec /* if from user, just load it up */
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
ENABLE_INTS
bl .altivec_unavailable_exception
b .ret_from_except
#ifdef CONFIG_ALTIVEC
/*
* load_up_altivec(unused, unused, tsk)
* Disable VMX for the task which had it previously,
* and save its vector registers in its thread_struct.
* Enables the VMX for use in the kernel on return.
* On SMP we know the VMX is free, since we give it up every
* switch (ie, no lazy save of the vector registers).
* On entry: r13 == 'current' && last_task_used_altivec != 'current'
*/
_STATIC(load_up_altivec)
mfmsr r5 /* grab the current MSR */
oris r5,r5,MSR_VEC@h
mtmsrd r5 /* enable use of VMX now */
isync
/*
* For SMP, we don't do lazy VMX switching because it just gets too
* horrendously complex, especially when a task switches from one CPU
* to another. Instead we call giveup_altvec in switch_to.
* VRSAVE isn't dealt with here, that is done in the normal context
* switch code. Note that we could rely on vrsave value to eventually
* avoid saving all of the VREGs here...
*/
#ifndef CONFIG_SMP
ld r3,last_task_used_altivec@got(r2)
ld r4,0(r3)
cmpdi 0,r4,0
beq 1f
/* Save VMX state to last_task_used_altivec's THREAD struct */
addi r4,r4,THREAD
SAVE_32VRS(0,r5,r4)
mfvscr vr0
li r10,THREAD_VSCR
stvx vr0,r10,r4
/* Disable VMX for last_task_used_altivec */
ld r5,PT_REGS(r4)
ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
lis r6,MSR_VEC@h
andc r4,r4,r6
std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
1:
#endif /* CONFIG_SMP */
/* Hack: if we get an altivec unavailable trap with VRSAVE
* set to all zeros, we assume this is a broken application
* that fails to set it properly, and thus we switch it to
* all 1's
*/
mfspr r4,SPRN_VRSAVE
cmpdi 0,r4,0
bne+ 1f
li r4,-1
mtspr SPRN_VRSAVE,r4
1:
/* enable use of VMX after return */
ld r4,PACACURRENT(r13)
addi r5,r4,THREAD /* Get THREAD */
oris r12,r12,MSR_VEC@h
std r12,_MSR(r1)
li r4,1
li r10,THREAD_VSCR
stw r4,THREAD_USED_VR(r5)
lvx vr0,r10,r5
mtvscr vr0
REST_32VRS(0,r4,r5)
#ifndef CONFIG_SMP
/* Update last_task_used_math to 'current' */
subi r4,r5,THREAD /* Back to 'current' */
std r4,0(r3)
#endif /* CONFIG_SMP */
/* restore registers and return */
b fast_exception_return
#endif /* CONFIG_ALTIVEC */
/*
* Hash table stuff
*/
.align 7
_GLOBAL(do_hash_page)
std r3,_DAR(r1)
std r4,_DSISR(r1)
andis. r0,r4,0xa450 /* weird error? */
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
bne- handle_page_fault /* if not, try to insert a HPTE */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
BEGIN_FTR_SECTION
andis. r0,r4,0x0020 /* Is it a segment table fault? */
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
bne- do_ste_alloc /* If so handle it */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
/*
* We need to set the _PAGE_USER bit if MSR_PR is set or if we are
* accessing a userspace segment (even from the kernel). We assume
* kernel addresses always have the high bit set.
*/
rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
rotldi r0,r3,15 /* Move high bit into MSR_PR posn */
orc r0,r12,r0 /* MSR_PR | ~high_bit */
rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */
ori r4,r4,1 /* add _PAGE_PRESENT */
rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
/*
* On iSeries, we soft-disable interrupts here, then
* hard-enable interrupts so that the hash_page code can spin on
* the hash_table_lock without problems on a shared processor.
*/
DISABLE_INTS
/*
* r3 contains the faulting address
* r4 contains the required access permissions
* r5 contains the trap number
*
* at return r3 = 0 for success
*/
bl .hash_page /* build HPTE if possible */
cmpdi r3,0 /* see if hash_page succeeded */
#ifdef DO_SOFT_DISABLE
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 10:19:00 +02:00
BEGIN_FW_FTR_SECTION
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* If we had interrupts soft-enabled at the point where the
* DSI/ISI occurred, and an interrupt came in during hash_page,
* handle it now.
* We jump to ret_from_except_lite rather than fast_exception_return
* because ret_from_except_lite will check for and handle pending
* interrupts if necessary.
*/
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
beq 13f
[POWERPC] Make sure interrupt enable gets restored properly The lazy IRQ disable patch missed a couple of places where the interrupt enable flags need to be restored correctly. First, we weren't restoring the paca->hard_enabled flag on interrupt exit. Instead of saving it on entry, we compute it from the MSR_EE bit in the MSR we are restoring at exit. Secondly, the MMU hash miss code was clearing both paca->soft_enabled and paca->hard_enabled but not restoring them in the case where hash_page was able to resolve the miss from the Linux page tables. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-18 02:11:22 +02:00
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
BEGIN_FW_FTR_SECTION
/*
* Here we have interrupts hard-disabled, so it is sufficient
* to restore paca->{soft,hard}_enable and get out.
*/
beq fast_exc_return_irq /* Return from exception on success */
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* For a hash failure, we don't bother re-enabling interrupts */
ble- 12f
/*
* hash_page couldn't handle it, set soft interrupt enable back
* to what it was before the trap. Note that .local_irq_restore
* handles any interrupts pending at this point.
*/
ld r3,SOFTE(r1)
bl .local_irq_restore
b 11f
/* Here we have a page fault that hash_page can't handle. */
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
handle_page_fault:
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
ENABLE_INTS
11: ld r4,_DAR(r1)
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_page_fault
cmpdi r3,0
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
beq+ 13f
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
bl .save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
lwz r4,_DAR(r1)
bl .bad_page_fault
b .ret_from_except
Merge branch 'linux-2.6' into for-linus
2006-12-04 05:59:07 +01:00
13: b .ret_from_except_lite
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* We have a page fault that hash_page could handle but HV refused
* the PTE insertion
*/
12: bl .save_nvgprs
[POWERPC] Provide a way to protect 4k subpages when using 64k pages Using 64k pages on 64-bit PowerPC systems makes life difficult for emulators that are trying to emulate an ISA, such as x86, which use a smaller page size, since the emulator can no longer use the MMU and the normal system calls for controlling page protections. Of course, the emulator can emulate the MMU by checking and possibly remapping the address for each memory access in software, but that is pretty slow. This provides a facility for such programs to control the access permissions on individual 4k sub-pages of 64k pages. The idea is that the emulator supplies an array of protection masks to apply to a specified range of virtual addresses. These masks are applied at the level where hardware PTEs are inserted into the hardware page table based on the Linux PTEs, so the Linux PTEs are not affected. Note that this new mechanism does not allow any access that would otherwise be prohibited; it can only prohibit accesses that would otherwise be allowed. This new facility is only available on 64-bit PowerPC and only when the kernel is configured for 64k pages. The masks are supplied using a new subpage_prot system call, which takes a starting virtual address and length, and a pointer to an array of protection masks in memory. The array has a 32-bit word per 64k page to be protected; each 32-bit word consists of 16 2-bit fields, for which 0 allows any access (that is otherwise allowed), 1 prevents write accesses, and 2 or 3 prevent any access. Implicit in this is that the regions of the address space that are protected are switched to use 4k hardware pages rather than 64k hardware pages (on machines with hardware 64k page support). In fact the whole process is switched to use 4k hardware pages when the subpage_prot system call is used, but this could be improved in future to switch only the affected segments. The subpage protection bits are stored in a 3 level tree akin to the page table tree. The top level of this tree is stored in a structure that is appended to the top level of the page table tree, i.e., the pgd array. Since it will often only be 32-bit addresses (below 4GB) that are protected, the pointers to the first four bottom level pages are also stored in this structure (each bottom level page contains the protection bits for 1GB of address space), so the protection bits for addresses below 4GB can be accessed with one fewer loads than those for higher addresses. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-23 22:35:13 +01:00
mr r5,r3
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
addi r3,r1,STACK_FRAME_OVERHEAD
[POWERPC] Fix si_addr value on low level hash failures If the low level MMU hash table insertion returns an error (which can happen in some rare circumstances when the hypervisor refuses the insertion of a PTE, typically if you try to access junk via /dev/mem), the generated signal had an incorrect si_addr value due to a bug in the assembly, which was loading it as a 32 bits quantity instead of a 64 bits quantity. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-07 07:17:02 +01:00
ld r4,_DAR(r1)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
bl .low_hash_fault
b .ret_from_except
/* here we have a segment miss */
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
do_ste_alloc:
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
bl .ste_allocate /* try to insert stab entry */
cmpdi r3,0
[PATCH] powerpc: Eliminate "exceeds stub group size" linker warning It turns out that the linker warnings on 64-bit powerpc about "section blah exceeds stub group size" were being triggered by conditional branches in head_64.S branching to global symbols, whether in head_64.S or in other files. This eliminates the warnings by making some global symbols in head_64.S no longer global, and by rearranging some branches. Signed-off-by: Paul Mackerras <paulus@samba.org> [ Yee-haa. Maybe I'll notice newly introduced real warnings now - Linus ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01 23:44:37 +01:00
bne- handle_page_fault
b fast_exception_return
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* r13 points to the PACA, r9 contains the saved CR,
* r11 and r12 contain the saved SRR0 and SRR1.
* r9 - r13 are saved in paca->exslb.
* We assume we aren't going to take any exceptions during this procedure.
* We assume (DAR >> 60) == 0xc.
*/
.align 7
_GLOBAL(do_stab_bolted)
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
/* Hash to the primary group */
ld r10,PACASTABVIRT(r13)
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r11,SPRN_DAR
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
srdi r11,r11,28
rldimi r10,r11,7,52 /* r10 = first ste of the group */
/* Calculate VSID */
/* This is a kernel address, so protovsid = ESID */
[POWERPC] Use 1TB segments This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 12:37:10 +02:00
ASM_VSID_SCRAMBLE(r11, r9, 256M)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
rldic r9,r11,12,16 /* r9 = vsid << 12 */
/* Search the primary group for a free entry */
1: ld r11,0(r10) /* Test valid bit of the current ste */
andi. r11,r11,0x80
beq 2f
addi r10,r10,16
andi. r11,r10,0x70
bne 1b
/* Stick for only searching the primary group for now. */
/* At least for now, we use a very simple random castout scheme */
/* Use the TB as a random number ; OR in 1 to avoid entry 0 */
mftb r11
rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */
ori r11,r11,0x10
/* r10 currently points to an ste one past the group of interest */
/* make it point to the randomly selected entry */
subi r10,r10,128
or r10,r10,r11 /* r10 is the entry to invalidate */
isync /* mark the entry invalid */
ld r11,0(r10)
rldicl r11,r11,56,1 /* clear the valid bit */
rotldi r11,r11,8
std r11,0(r10)
sync
clrrdi r11,r11,28 /* Get the esid part of the ste */
slbie r11
2: std r9,8(r10) /* Store the vsid part of the ste */
eieio
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mfspr r11,SPRN_DAR /* Get the new esid */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
clrrdi r11,r11,28 /* Permits a full 32b of ESID */
ori r11,r11,0x90 /* Turn on valid and kp */
std r11,0(r10) /* Put new entry back into the stab */
sync
/* All done -- return from exception. */
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */
andi. r10,r12,MSR_RI
beq- unrecov_slb
mtcrf 0x80,r9 /* restore CR */
mfmsr r10
clrrdi r10,r10,2
mtmsrd r10,1
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
ld r11,PACA_EXSLB+EX_R11(r13)
ld r12,PACA_EXSLB+EX_R12(r13)
ld r13,PACA_EXSLB+EX_R13(r13)
rfid
b . /* prevent speculative execution */
/*
* Space for CPU0's segment table.
*
* On iSeries, the hypervisor must fill in at least one entry before
[POWERPC] iSeries: Clean up lparmap mess We need to have xLparMap in head_64.S so that it is at a fixed address (because the linker will not resolve (address & 0xffffffff) for us). But the assembler miscalculates the KERNEL_VSID() expressions. So put the confusing expressions into asm-offsets.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-20 06:58:36 +02:00
* we get control (with relocate on). The address is given to the hv
* as a page number (see xLparMap below), so this must be at a
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
* fixed address (the linker can't compute (u64)&initial_stab >>
* PAGE_SHIFT).
*/
[PATCH] powerpc: Fixups for kernel linked at 32 MB There's a few places where we need to fix things up for the kernel to work if it's linked at 32MB: - platforms/powermac/smp.c To start secondary cpus on pmac we patch the reset vector, which is fine. Except if we're above 32MB we don't have enough bits for an absolute branch, it needs to relative. - kernel/head_64.s - A few branches in the cpu hold code need to load the full target address and do a bctr. - after_prom_start needs to load PHYSICAL_START as the dest address, not 0. - The exception prolog needs to load the low word of the target adddress, not just the low halfword. - Fixup handling of the initial stab address. - kernel/setup_64.c smp_release_cpus() needs to write 1 to the spinloop flag near 0, not 32 MB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-05 22:49:00 +01:00
. = STAB0_OFFSET /* 0x6000 */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
.globl initial_stab
initial_stab:
.space 4096
[POWERPC] FWNMI is only used on pSeries This saves 4k on non pSeries builds (except for iSeries where it saves almost 4k). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-18 09:25:12 +02:00
#ifdef CONFIG_PPC_PSERIES
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* Data area reserved for FWNMI option.
* This address (0x7000) is fixed by the RPA.
*/
.= 0x7000
.globl fwnmi_data_area
fwnmi_data_area:
[POWERPC] FWNMI is only used on pSeries This saves 4k on non pSeries builds (except for iSeries where it saves almost 4k). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-18 09:25:12 +02:00
#endif /* CONFIG_PPC_PSERIES */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* iSeries does not use the FWNMI stuff, so it is safe to put
* this here, even if we later allow kernels that will boot on
* both pSeries and iSeries */
#ifdef CONFIG_PPC_ISERIES
. = LPARMAP_PHYS
[POWERPC] iSeries: Clean up lparmap mess We need to have xLparMap in head_64.S so that it is at a fixed address (because the linker will not resolve (address & 0xffffffff) for us). But the assembler miscalculates the KERNEL_VSID() expressions. So put the confusing expressions into asm-offsets.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-20 06:58:36 +02:00
.globl xLparMap
xLparMap:
.quad HvEsidsToMap /* xNumberEsids */
.quad HvRangesToMap /* xNumberRanges */
.quad STAB0_PAGE /* xSegmentTableOffs */
.zero 40 /* xRsvd */
/* xEsids (HvEsidsToMap entries of 2 quads) */
.quad PAGE_OFFSET_ESID /* xKernelEsid */
.quad PAGE_OFFSET_VSID /* xKernelVsid */
.quad VMALLOC_START_ESID /* xKernelEsid */
.quad VMALLOC_START_VSID /* xKernelVsid */
/* xRanges (HvRangesToMap entries of 3 quads) */
.quad HvPagesToMap /* xPages */
.quad 0 /* xOffset */
.quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#endif /* CONFIG_PPC_ISERIES */
[POWERPC] FWNMI is only used on pSeries This saves 4k on non pSeries builds (except for iSeries where it saves almost 4k). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-18 09:25:12 +02:00
#ifdef CONFIG_PPC_PSERIES
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
. = 0x8000
[POWERPC] FWNMI is only used on pSeries This saves 4k on non pSeries builds (except for iSeries where it saves almost 4k). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-18 09:25:12 +02:00
#endif /* CONFIG_PPC_PSERIES */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 07:07:08 +02:00
* On pSeries and most other platforms, secondary processors spin
* in the following code.
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
* At entry, r3 = this processor's number (physical cpu id)
*/
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 07:07:08 +02:00
_GLOBAL(generic_secondary_smp_init)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mr r24,r3
/* turn on 64-bit mode */
bl .enable_64b_mode
/* Set up a paca value for this processor. Since we have the
* physical cpu id in r24, we need to search the pacas to find
* which logical id maps to our physical one.
*/
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r13, paca) /* Get base vaddr of paca array */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
li r5,0 /* logical cpu id */
1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */
cmpw r6,r24 /* Compare to our id */
beq 2f
addi r13,r13,PACA_SIZE /* Loop to next PACA on miss */
addi r5,r5,1
cmpwi r5,NR_CPUS
blt 1b
mr r3,r24 /* not found, copy phys to r3 */
b .kexec_wait /* next kernel might do better */
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* From now on, r24 is expected to be logical cpuid */
mr r24,r5
3: HMT_LOW
lbz r23,PACAPROCSTART(r13) /* Test if this processor should */
/* start. */
sync
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 07:07:08 +02:00
#ifndef CONFIG_SMP
b 3b /* Never go on non-SMP */
#else
cmpwi 0,r23,0
beq 3b /* Loop until told to go */
/* See if we need to call a cpu state restore handler */
LOAD_REG_IMMEDIATE(r23, cur_cpu_spec)
ld r23,0(r23)
ld r23,CPU_SPEC_RESTORE(r23)
cmpdi 0,r23,0
beq 4f
ld r23,0(r23)
mtctr r23
bctrl
4: /* Create a temp kernel stack for use before relocation is on. */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
ld r1,PACAEMERGSP(r13)
subi r1,r1,STACK_FRAME_OVERHEAD
[POWERPC] iSeries: Eliminate "exceeds stub group size" warnings Commit 3ccfc65c5004e5fe5cfbffe43b8acc686680b53e missed the same fixes for legacy iSeries specific code, so make some more symbols no longer global. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-27 04:59:50 +01:00
b __secondary_start
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#endif
_STATIC(__mmu_off)
mfmsr r3
andi. r0,r3,MSR_IR|MSR_DR
beqlr
andc r3,r3,r0
mtspr SPRN_SRR0,r4
mtspr SPRN_SRR1,r3
sync
rfid
b . /* prevent speculative execution */
/*
* Here is our main kernel entry point. We support currently 2 kind of entries
* depending on the value of r5.
*
* r5 != NULL -> OF entry, we go to prom_init, "legacy" parameter content
* in r3...r7
*
* r5 == NULL -> kexec style entry. r3 is a physical pointer to the
* DT block, r4 is a physical pointer to the kernel itself
*
*/
_GLOBAL(__start_initialization_multiplatform)
/*
* Are we booted from a PROM Of-type client-interface ?
*/
cmpldi cr0,r5,0
[POWERPC] Fix more section mismatches in head_64.S WARNING: vmlinux.o(.text+0x8174): Section mismatch: reference to .init.text:.prom_init (between '.__boot_from_prom' and '.__after_prom_start') WARNING: vmlinux.o(.text+0x8498): Section mismatch: reference to .init.text:.early_setup (between '.start_here_multiplatform' and '.start_here_common') WARNING: vmlinux.o(.text+0x8514): Section mismatch: reference to .init.text:.setup_system (between '.start_here_common' and 'system_call_common') WARNING: vmlinux.o(.text+0x8530): Section mismatch: reference to .init.text:.start_kernel (between '.start_here_common' and 'system_call_common') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-31 08:44:13 +02:00
beq 1f
b .__boot_from_prom /* yes -> prom */
1:
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* Save parameters */
mr r31,r3
mr r30,r4
/* Make sure we are running in 64 bits mode */
bl .enable_64b_mode
/* Setup some critical 970 SPRs before switching MMU off */
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 07:07:08 +02:00
mfspr r0,SPRN_PVR
srwi r0,r0,16
cmpwi r0,0x39 /* 970 */
beq 1f
cmpwi r0,0x3c /* 970FX */
beq 1f
cmpwi r0,0x44 /* 970MP */
[POWERPC] Make sure __cpu_preinit_ppc970 gets called on 970GX processors Add check for 970GX for __cpu_preinit_ppc970. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-26 00:32:40 +02:00
beq 1f
cmpwi r0,0x45 /* 970GX */
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 07:07:08 +02:00
bne 2f
1: bl .__cpu_preinit_ppc970
2:
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* Switch off MMU if not already */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r4, .__after_prom_start - KERNELBASE)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
add r4,r4,r30
bl .__mmu_off
b .__after_prom_start
[POWERPC] Fix more section mismatches in head_64.S WARNING: vmlinux.o(.text+0x8174): Section mismatch: reference to .init.text:.prom_init (between '.__boot_from_prom' and '.__after_prom_start') WARNING: vmlinux.o(.text+0x8498): Section mismatch: reference to .init.text:.early_setup (between '.start_here_multiplatform' and '.start_here_common') WARNING: vmlinux.o(.text+0x8514): Section mismatch: reference to .init.text:.setup_system (between '.start_here_common' and 'system_call_common') WARNING: vmlinux.o(.text+0x8530): Section mismatch: reference to .init.text:.start_kernel (between '.start_here_common' and 'system_call_common') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-31 08:44:13 +02:00
_INIT_STATIC(__boot_from_prom)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* Save parameters */
mr r31,r3
mr r30,r4
mr r29,r5
mr r28,r6
mr r27,r7
[PATCH] correct the comment about stackpointer alignment in __boot_from_prom The address of variable val in prom_init_stdout is passed to prom_getprop. prom_getprop casts the pointer to u32 and passes it to call_prom in the hope that OpenFirmware stores something there. But the pointer is truncated in the lower bits and the expected value is stored somewhere else. In my testing I had a stackpointer of 0x0023e6b4. val was at offset 120, wich has address 0x0023e72c. But the value passed to OF was 0x0023e728. c00000000040b710: 3b 01 00 78 addi r24,r1,120 ... c00000000040b754: 57 08 00 38 rlwinm r8,r24,0,0,28 ... c00000000040b784: 80 01 00 78 lwz r0,120(r1) ... c00000000040b798: 90 1b 00 0c stw r0,12(r27) ... The stackpointer came from 32bit code. The chain was yaboot -> zImage -> vmlinux PowerMac OpenFirmware does appearently not handle the ELF sections correctly. If yaboot was compiled in /usr/src/packages/BUILD/lilo-10.1.1/yaboot, then the stackpointer is unaligned. But the stackpointer is correct if yaboot is compiled in /tmp/yaboot. This bug triggered since 2.6.15, now prom_getprop is an inline function. gcc clears the lower bits, instead of just clearing the upper 32 bits. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-23 21:50:59 +01:00
/*
* Align the stack to 16-byte boundary
* Depending on the size and layout of the ELF sections in the initial
* boot binary, the stack pointer will be unalignet on PowerMac
*/
ppc64: make sure to align stack pointer to 16 bytes at boot yaboot is scrogged and calls us with an invalid stack alignment, it seems. Thanks to David Woodhouse to pointing me to the problem. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-05 00:00:45 +01:00
rldicr r1,r1,0,59
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* Make sure we are running in 64 bits mode */
bl .enable_64b_mode
/* put a relocation offset into r3 */
bl .reloc_offset
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r2,__toc_start)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
addi r2,r2,0x4000
addi r2,r2,0x4000
/* Relocate the TOC from a virt addr to a real addr */
powerpc: Fix bug caused by negation of 64-bit reloc_offset value Although both ppc32 and ppc64 have a reloc_offset function, the ppc64 one produced the opposite sign to the ppc32 one. This standardizes on the ppc32 sign and fixes the merged 64-bit code to account for that. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:41:25 +02:00
add r2,r2,r3
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* Restore parameters */
mr r3,r31
mr r4,r30
mr r5,r29
mr r6,r28
mr r7,r27
/* Do all of the interaction with OF client interface */
bl .prom_init
/* We never return */
trap
_STATIC(__after_prom_start)
/*
[PATCH] powerpc: Fixups for kernel linked at 32 MB There's a few places where we need to fix things up for the kernel to work if it's linked at 32MB: - platforms/powermac/smp.c To start secondary cpus on pmac we patch the reset vector, which is fine. Except if we're above 32MB we don't have enough bits for an absolute branch, it needs to relative. - kernel/head_64.s - A few branches in the cpu hold code need to load the full target address and do a bctr. - after_prom_start needs to load PHYSICAL_START as the dest address, not 0. - The exception prolog needs to load the low word of the target adddress, not just the low halfword. - Fixup handling of the initial stab address. - kernel/setup_64.c smp_release_cpus() needs to write 1 to the spinloop flag near 0, not 32 MB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-05 22:49:00 +01:00
* We need to run with __start at physical address PHYSICAL_START.
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
* This will leave some code in the first 256B of
* real memory, which are reserved for software use.
* The remainder of the first page is loaded with the fixed
* interrupt vectors. The next two pages are filled with
* unknown exception placeholders.
*
* Note: This process overwrites the OF exception vectors.
* r26 == relocation offset
* r27 == KERNELBASE
*/
bl .reloc_offset
mr r26,r3
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r27, KERNELBASE)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r3, PHYSICAL_START) /* target addr */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
// XXX FIXME: Use phys returned by OF (r30)
powerpc: Fix bug caused by negation of 64-bit reloc_offset value Although both ppc32 and ppc64 have a reloc_offset function, the ppc64 one produced the opposite sign to the ppc32 one. This standardizes on the ppc32 sign and fixes the merged 64-bit code to account for that. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:41:25 +02:00
add r4,r27,r26 /* source addr */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* current address of _start */
/* i.e. where we are running */
/* the source addr */
[POWERPC] Skip the "copy down" of the kernel if it is already at zero. This patch allows the kernel to recognized that it was loaded at zero and the copy down of the image is unnecessary. This is useful for Simulators and kexec models. On a typical 3.8 MiB vmlinux.strip this saves about 2.3 million instructions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-26 10:56:58 +02:00
cmpdi r4,0 /* In some cases the loader may */
[POWERPC] Fix more section mismatches in head_64.S WARNING: vmlinux.o(.text+0x8174): Section mismatch: reference to .init.text:.prom_init (between '.__boot_from_prom' and '.__after_prom_start') WARNING: vmlinux.o(.text+0x8498): Section mismatch: reference to .init.text:.early_setup (between '.start_here_multiplatform' and '.start_here_common') WARNING: vmlinux.o(.text+0x8514): Section mismatch: reference to .init.text:.setup_system (between '.start_here_common' and 'system_call_common') WARNING: vmlinux.o(.text+0x8530): Section mismatch: reference to .init.text:.start_kernel (between '.start_here_common' and 'system_call_common') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-31 08:44:13 +02:00
bne 1f
b .start_here_multiplatform /* have already put us at zero */
[POWERPC] Skip the "copy down" of the kernel if it is already at zero. This patch allows the kernel to recognized that it was loaded at zero and the copy down of the image is unnecessary. This is useful for Simulators and kexec models. On a typical 3.8 MiB vmlinux.strip this saves about 2.3 million instructions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-26 10:56:58 +02:00
/* so we can skip the copy. */
[POWERPC] Fix more section mismatches in head_64.S WARNING: vmlinux.o(.text+0x8174): Section mismatch: reference to .init.text:.prom_init (between '.__boot_from_prom' and '.__after_prom_start') WARNING: vmlinux.o(.text+0x8498): Section mismatch: reference to .init.text:.early_setup (between '.start_here_multiplatform' and '.start_here_common') WARNING: vmlinux.o(.text+0x8514): Section mismatch: reference to .init.text:.setup_system (between '.start_here_common' and 'system_call_common') WARNING: vmlinux.o(.text+0x8530): Section mismatch: reference to .init.text:.start_kernel (between '.start_here_common' and 'system_call_common') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-31 08:44:13 +02:00
1: LOAD_REG_IMMEDIATE(r5,copy_to_here) /* # bytes of memory to copy */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
sub r5,r5,r27
li r6,0x100 /* Start offset, the first 0x100 */
/* bytes were copied earlier. */
bl .copy_and_flush /* copy the first n bytes */
/* this includes the code being */
/* executed here. */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r0, 4f) /* Jump to the copy of this code */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mtctr r0 /* that we just made/relocated */
bctr
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
4: LOAD_REG_IMMEDIATE(r5,klimit)
powerpc: Fix bug caused by negation of 64-bit reloc_offset value Although both ppc32 and ppc64 have a reloc_offset function, the ppc64 one produced the opposite sign to the ppc32 one. This standardizes on the ppc32 sign and fixes the merged 64-bit code to account for that. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:41:25 +02:00
add r5,r5,r26
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
ld r5,0(r5) /* get the value of klimit */
sub r5,r5,r27
bl .copy_and_flush /* copy the rest */
b .start_here_multiplatform
/*
* Copy routine used to copy the kernel to start at physical address 0
* and flush and invalidate the caches as needed.
* r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
* on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
*
* Note: this routine *only* clobbers r0, r6 and lr
*/
_GLOBAL(copy_and_flush)
addi r5,r5,-8
addi r6,r6,-8
[POWERPC] powerpc: Reduce default cacheline size to 64 bytes Reduce default cacheline size on 64-bit powerpc from 128 bytes to 64. This is the architected minimum. In most cases we'll still end up using cache line information from the device tree, but defaults are used during early boot and doing a few dcbst/icbi's too many there won't do any harm. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 21:34:41 +02:00
4: li r0,8 /* Use the smallest common */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* denominator cache line */
/* size. This results in */
/* extra cache line flushes */
/* but operation is correct. */
/* Can't get cache line size */
/* from NACA as it is being */
/* moved too. */
mtctr r0 /* put # words/line in ctr */
3: addi r6,r6,8 /* copy a cache line */
ldx r0,r6,r4
stdx r0,r6,r3
bdnz 3b
dcbst r6,r3 /* write it to memory */
sync
icbi r6,r3 /* flush the icache line */
cmpld 0,r6,r5
blt 4b
sync
addi r5,r5,8
addi r6,r6,8
blr
.align 8
copy_to_here:
#ifdef CONFIG_SMP
#ifdef CONFIG_PPC_PMAC
/*
* On PowerMac, secondary processors starts from the reset vector, which
* is temporarily turned into a call to one of the functions below.
*/
.section ".text";
.align 2 ;
powerpc: Merge in 64-bit powermac support. This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to arch/powerpc/platforms/powermac/*.c and makes various minor tweaks elsewhere. On the powermac we now initialize ppc_md by copying the whole pmac_md structure into it, which required some changes in the ordering of initializations of individual fields of it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 08:02:39 +02:00
.globl __secondary_start_pmac_0
__secondary_start_pmac_0:
/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
li r24,0
b 1f
li r24,1
b 1f
li r24,2
b 1f
li r24,3
1:
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
_GLOBAL(pmac_secondary_start)
/* turn on 64-bit mode */
bl .enable_64b_mode
/* Copy some CPU settings from CPU 0 */
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 07:07:08 +02:00
bl .__restore_cpu_ppc970
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* pSeries do that early though I don't think we really need it */
mfmsr r3
ori r3,r3,MSR_RI
mtmsrd r3 /* RI on */
/* Set up a paca value for this processor. */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r4, paca) /* Get base vaddr of paca array */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */
add r13,r13,r4 /* for this processor. */
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* Create a temp kernel stack for use before relocation is on. */
ld r1,PACAEMERGSP(r13)
subi r1,r1,STACK_FRAME_OVERHEAD
[POWERPC] iSeries: Eliminate "exceeds stub group size" warnings Commit 3ccfc65c5004e5fe5cfbffe43b8acc686680b53e missed the same fixes for legacy iSeries specific code, so make some more symbols no longer global. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-27 04:59:50 +01:00
b __secondary_start
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#endif /* CONFIG_PPC_PMAC */
/*
* This function is called after the master CPU has released the
* secondary processors. The execution environment is relocation off.
* The paca for this processor has the following fields initialized at
* this point:
* 1. Processor number
* 2. Segment table pointer (virtual address)
* On entry the following are set:
* r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries
* r24 = cpu# (in Linux terms)
* r13 = paca virtual address
* SPRG3 = paca virtual address
*/
[POWERPC] Move iSeries startup code out of head_64.S Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 05:44:58 +02:00
.globl __secondary_start
[POWERPC] iSeries: Eliminate "exceeds stub group size" warnings Commit 3ccfc65c5004e5fe5cfbffe43b8acc686680b53e missed the same fixes for legacy iSeries specific code, so make some more symbols no longer global. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-27 04:59:50 +01:00
__secondary_start:
[PATCH] powerpc: merge code values for identifying platforms This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 03:37:51 +01:00
/* Set thread priority to MEDIUM */
HMT_MEDIUM
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
[PATCH] powerpc: merge code values for identifying platforms This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 03:37:51 +01:00
/* Load TOC */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
ld r2,PACATOC(r13)
[PATCH] powerpc: merge code values for identifying platforms This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 03:37:51 +01:00
/* Do early setup for that CPU (stab, slb, hash table pointer) */
bl .early_setup_secondary
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* Initialize the kernel stack. Just a repeat for iSeries. */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_ADDR(r3, current_set)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
sldi r28,r24,3 /* get current_set[cpu#] */
ldx r1,r3,r28
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
std r1,PACAKSAVE(r13)
[PATCH] powerpc: merge code values for identifying platforms This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 03:37:51 +01:00
/* Clear backchain so we get nice backtraces */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
li r7,0
mtlr r7
/* enable MMU and jump to start_secondary */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_ADDR(r3, .start_secondary_prolog)
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
[POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:47:49 +02:00
#ifdef CONFIG_PPC_ISERIES
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 10:19:00 +02:00
BEGIN_FW_FTR_SECTION
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
ori r4,r4,MSR_EE
[POWERPC] Fix iSeries hard irq enabling regression A subtle bug sneaked into iSeries recently. On this platform, we must not normally clear MSR:EE (the hardware external interrupt enable) except for short periods of time. Taking an interrupt while soft-disabled doesn't cause us to clear it for example. The iSeries kernel expects to mostly run with MSR:EE enabled at all times except in a few exception entry/exit code paths. Thus local_irq_enable() doesn't check if it needs to hard-enable as it expects this to be unnecessary on iSeries. However, hard_irq_disable() _does_ cause MSR:EE to be cleared, including on iSeries. A call to it was recently added to the context switch code, thus causing interrupts to become disabled for a long periods of time, causing the iSeries watchdog to kick in under some circumstances and other nasty things. This patch fixes it by making local_irq_enable() properly re-enable MSR:EE on iSeries. It basically removes a return statement here to make iSeries use the same code path as everybody else. That does mean that we might occasionally get spurious decrementer interrupts but I don't think that matters. Another option would have been to make hard_irq_disable() a nop on iSeries but I didn't like it much, in case we have good reasons to hard-disable. Part of the patch is fixes to make sure the hard_enabled PACA field is properly set on iSeries as it used not to be before, since it was mostly unused. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-02 06:58:40 +02:00
li r8,1
stb r8,PACAHARDIRQEN(r13)
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 10:19:00 +02:00
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#endif
[POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:47:49 +02:00
BEGIN_FW_FTR_SECTION
stb r7,PACAHARDIRQEN(r13)
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
[POWERPC] Fix iSeries hard irq enabling regression A subtle bug sneaked into iSeries recently. On this platform, we must not normally clear MSR:EE (the hardware external interrupt enable) except for short periods of time. Taking an interrupt while soft-disabled doesn't cause us to clear it for example. The iSeries kernel expects to mostly run with MSR:EE enabled at all times except in a few exception entry/exit code paths. Thus local_irq_enable() doesn't check if it needs to hard-enable as it expects this to be unnecessary on iSeries. However, hard_irq_disable() _does_ cause MSR:EE to be cleared, including on iSeries. A call to it was recently added to the context switch code, thus causing interrupts to become disabled for a long periods of time, causing the iSeries watchdog to kick in under some circumstances and other nasty things. This patch fixes it by making local_irq_enable() properly re-enable MSR:EE on iSeries. It basically removes a return statement here to make iSeries use the same code path as everybody else. That does mean that we might occasionally get spurious decrementer interrupts but I don't think that matters. Another option would have been to make hard_irq_disable() a nop on iSeries but I didn't like it much, in case we have good reasons to hard-disable. Part of the patch is fixes to make sure the hard_enabled PACA field is properly set on iSeries as it used not to be before, since it was mostly unused. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-02 06:58:40 +02:00
stb r7,PACASOFTIRQEN(r13)
[POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:47:49 +02:00
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
rfid
b . /* prevent speculative execution */
/*
* Running with relocation on at this point. All we want to do is
* zero the stack back-chain pointer before going into C code.
*/
_GLOBAL(start_secondary_prolog)
li r3,0
std r3,0(r1) /* Zero the stack frame pointer */
bl .start_secondary
[PATCH] powerpc: merge code values for identifying platforms This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 03:37:51 +01:00
b .
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#endif
/*
* This subroutine clobbers r11 and r12
*/
_GLOBAL(enable_64b_mode)
mfmsr r11 /* grab the current MSR */
li r12,1
rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
or r11,r11,r12
li r12,1
rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
or r11,r11,r12
mtmsrd r11
isync
blr
/*
* This is where the main kernel code starts.
*/
[POWERPC] Fix more section mismatches in head_64.S WARNING: vmlinux.o(.text+0x8174): Section mismatch: reference to .init.text:.prom_init (between '.__boot_from_prom' and '.__after_prom_start') WARNING: vmlinux.o(.text+0x8498): Section mismatch: reference to .init.text:.early_setup (between '.start_here_multiplatform' and '.start_here_common') WARNING: vmlinux.o(.text+0x8514): Section mismatch: reference to .init.text:.setup_system (between '.start_here_common' and 'system_call_common') WARNING: vmlinux.o(.text+0x8530): Section mismatch: reference to .init.text:.start_kernel (between '.start_here_common' and 'system_call_common') Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-31 08:44:13 +02:00
_INIT_STATIC(start_here_multiplatform)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* get a new offset, now that the kernel has moved. */
bl .reloc_offset
mr r26,r3
/* Clear out the BSS. It may have been done in prom_init,
* already but that's irrelevant since prom_init will soon
* be detached from the kernel completely. Besides, we need
* to clear it now for kexec-style entry.
*/
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r11,__bss_stop)
LOAD_REG_IMMEDIATE(r8,__bss_start)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
sub r11,r11,r8 /* bss size */
addi r11,r11,7 /* round up to an even double word */
rldicl. r11,r11,61,3 /* shift right by 3 */
beq 4f
addi r8,r8,-8
li r0,0
mtctr r11 /* zero this many doublewords */
3: stdu r0,8(r8)
bdnz 3b
4:
mfmsr r6
ori r6,r6,MSR_RI
mtmsrd r6 /* RI on */
/* The following gets the stack and TOC set up with the regs */
/* pointing to the real addr of the kernel stack. This is */
/* all done to support the C function call below which sets */
/* up the htab. This is done because we have relocated the */
/* kernel but are still running in real mode. */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r3,init_thread_union)
powerpc: Fix bug caused by negation of 64-bit reloc_offset value Although both ppc32 and ppc64 have a reloc_offset function, the ppc64 one produced the opposite sign to the ppc32 one. This standardizes on the ppc32 sign and fixes the merged 64-bit code to account for that. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:41:25 +02:00
add r3,r3,r26
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* set up a stack pointer (physical address) */
addi r1,r3,THREAD_SIZE
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
/* set up the TOC (physical address) */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r2,__toc_start)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
addi r2,r2,0x4000
addi r2,r2,0x4000
powerpc: Fix bug caused by negation of 64-bit reloc_offset value Although both ppc32 and ppc64 have a reloc_offset function, the ppc64 one produced the opposite sign to the ppc32 one. This standardizes on the ppc32 sign and fixes the merged 64-bit code to account for that. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:41:25 +02:00
add r2,r2,r26
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
/* Restore parameters passed from prom_init/kexec */
mr r3,r31
bl .early_setup
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r3, .start_here_common)
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
powerpc: Use SPRN_xxx rather than xxx for SPR numbers This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 06:01:07 +02:00
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
rfid
b . /* prevent speculative execution */
/* This is where all platforms converge execution */
[POWERPC] Move iSeries startup code out of head_64.S Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 05:44:58 +02:00
_INIT_GLOBAL(start_here_common)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* relocation is on at this point */
/* The following code sets up the SP and TOC now that we are */
/* running with translation enabled. */
[PATCH] powerpc: Cleanup LOADADDR etc. asm macros This patch consolidates the variety of macros used for loading 32 or 64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*). The idea is to make the set of macros consistent across 32 and 64 bit and to make it more obvious which is the appropriate one to use in a given situation. The new macros and their semantics are described in the comments in ppc_asm.h. In the process, we change several places that were unnecessarily using immediate loads on ppc64 to use the GOT/TOC. Likewise we cleanup a couple of places where we were clumsily subtracting PAGE_OFFSET with asm instructions to use assemble-time arithmetic or the toreal() macro instead. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 04:56:25 +01:00
LOAD_REG_IMMEDIATE(r3,init_thread_union)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/* set up the stack */
addi r1,r3,THREAD_SIZE
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
/* Load the TOC */
ld r2,PACATOC(r13)
std r1,PACAKSAVE(r13)
bl .setup_system
/* Load up the kernel context */
5:
li r5,0
[POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 08:47:49 +02:00
stb r5,PACASOFTIRQEN(r13) /* Soft Disabled */
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mfmsr r5
[POWERPC] Fix iSeries hard irq enabling regression A subtle bug sneaked into iSeries recently. On this platform, we must not normally clear MSR:EE (the hardware external interrupt enable) except for short periods of time. Taking an interrupt while soft-disabled doesn't cause us to clear it for example. The iSeries kernel expects to mostly run with MSR:EE enabled at all times except in a few exception entry/exit code paths. Thus local_irq_enable() doesn't check if it needs to hard-enable as it expects this to be unnecessary on iSeries. However, hard_irq_disable() _does_ cause MSR:EE to be cleared, including on iSeries. A call to it was recently added to the context switch code, thus causing interrupts to become disabled for a long periods of time, causing the iSeries watchdog to kick in under some circumstances and other nasty things. This patch fixes it by making local_irq_enable() properly re-enable MSR:EE on iSeries. It basically removes a return statement here to make iSeries use the same code path as everybody else. That does mean that we might occasionally get spurious decrementer interrupts but I don't think that matters. Another option would have been to make hard_irq_disable() a nop on iSeries but I didn't like it much, in case we have good reasons to hard-disable. Part of the patch is fixes to make sure the hard_enabled PACA field is properly set on iSeries as it used not to be before, since it was mostly unused. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-02 06:58:40 +02:00
ori r5,r5,MSR_EE /* Hard Enabled on iSeries*/
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
mtmsrd r5
[POWERPC] Fix iSeries hard irq enabling regression A subtle bug sneaked into iSeries recently. On this platform, we must not normally clear MSR:EE (the hardware external interrupt enable) except for short periods of time. Taking an interrupt while soft-disabled doesn't cause us to clear it for example. The iSeries kernel expects to mostly run with MSR:EE enabled at all times except in a few exception entry/exit code paths. Thus local_irq_enable() doesn't check if it needs to hard-enable as it expects this to be unnecessary on iSeries. However, hard_irq_disable() _does_ cause MSR:EE to be cleared, including on iSeries. A call to it was recently added to the context switch code, thus causing interrupts to become disabled for a long periods of time, causing the iSeries watchdog to kick in under some circumstances and other nasty things. This patch fixes it by making local_irq_enable() properly re-enable MSR:EE on iSeries. It basically removes a return statement here to make iSeries use the same code path as everybody else. That does mean that we might occasionally get spurious decrementer interrupts but I don't think that matters. Another option would have been to make hard_irq_disable() a nop on iSeries but I didn't like it much, in case we have good reasons to hard-disable. Part of the patch is fixes to make sure the hard_enabled PACA field is properly set on iSeries as it used not to be before, since it was mostly unused. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-02 06:58:40 +02:00
li r5,1
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 10:19:00 +02:00
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
#endif
[POWERPC] Fix iSeries hard irq enabling regression A subtle bug sneaked into iSeries recently. On this platform, we must not normally clear MSR:EE (the hardware external interrupt enable) except for short periods of time. Taking an interrupt while soft-disabled doesn't cause us to clear it for example. The iSeries kernel expects to mostly run with MSR:EE enabled at all times except in a few exception entry/exit code paths. Thus local_irq_enable() doesn't check if it needs to hard-enable as it expects this to be unnecessary on iSeries. However, hard_irq_disable() _does_ cause MSR:EE to be cleared, including on iSeries. A call to it was recently added to the context switch code, thus causing interrupts to become disabled for a long periods of time, causing the iSeries watchdog to kick in under some circumstances and other nasty things. This patch fixes it by making local_irq_enable() properly re-enable MSR:EE on iSeries. It basically removes a return statement here to make iSeries use the same code path as everybody else. That does mean that we might occasionally get spurious decrementer interrupts but I don't think that matters. Another option would have been to make hard_irq_disable() a nop on iSeries but I didn't like it much, in case we have good reasons to hard-disable. Part of the patch is fixes to make sure the hard_enabled PACA field is properly set on iSeries as it used not to be before, since it was mostly unused. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-02 06:58:40 +02:00
stb r5,PACAHARDIRQEN(r13) /* Hard Disabled on others */
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
[POWERPC] Fix iSeries hard irq enabling regression A subtle bug sneaked into iSeries recently. On this platform, we must not normally clear MSR:EE (the hardware external interrupt enable) except for short periods of time. Taking an interrupt while soft-disabled doesn't cause us to clear it for example. The iSeries kernel expects to mostly run with MSR:EE enabled at all times except in a few exception entry/exit code paths. Thus local_irq_enable() doesn't check if it needs to hard-enable as it expects this to be unnecessary on iSeries. However, hard_irq_disable() _does_ cause MSR:EE to be cleared, including on iSeries. A call to it was recently added to the context switch code, thus causing interrupts to become disabled for a long periods of time, causing the iSeries watchdog to kick in under some circumstances and other nasty things. This patch fixes it by making local_irq_enable() properly re-enable MSR:EE on iSeries. It basically removes a return statement here to make iSeries use the same code path as everybody else. That does mean that we might occasionally get spurious decrementer interrupts but I don't think that matters. Another option would have been to make hard_irq_disable() a nop on iSeries but I didn't like it much, in case we have good reasons to hard-disable. Part of the patch is fixes to make sure the hard_enabled PACA field is properly set on iSeries as it used not to be before, since it was mostly unused. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-02 06:58:40 +02:00
bl .start_kernel
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
[PATCH] powerpc64: remove broken/bitrotted HMT support HMT support is currently broken and needs to be reworked to play nicely with the SMT scheduler. Remove the bit rotten bits for the time being. I also updated an incorrect comment, we enter __secondary_hold with the physical cpu id in r3. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-13 08:11:13 +01:00
/* Not reached */
BUG_OPCODE
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 08:04:21 +02:00
/*
* We put a few things here that have to be page-aligned.
* This stuff goes at the beginning of the bss, which is page-aligned.
*/
.section ".bss"
.align PAGE_SHIFT
.globl empty_zero_page
empty_zero_page:
.space PAGE_SIZE
.globl swapper_pg_dir
swapper_pg_dir:
[POWERPC] Size swapper_pg_dir correctly David Gibson pointed out that swapper_pg_dir actually need to be PGD_TABLE_SIZE bytes long not PAGE_SIZE. This actually saves 64k in the bss for a kernel ppc64_defconfig built with CONFIG_PPC_64K_PAGES. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-18 09:22:59 +02:00
.space PGD_TABLE_SIZE
Reference in New Issue Copy Permalink