blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 23:50:22 +02:00
|
|
|
/*
|
2010-10-27 05:46:22 +02:00
|
|
|
* Copyright 2005-2010 Analog Devices Inc.
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 23:50:22 +02:00
|
|
|
*
|
2009-09-24 16:11:24 +02:00
|
|
|
* Licensed under the GPL-2 or later
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 23:50:22 +02:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef _CDEF_BF532_H
|
|
|
|
|
#define _CDEF_BF532_H
|
2007-07-25 06:01:19 +02:00
|
|
|
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 23:50:22 +02:00
|
|
|
/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */
|
|
|
|
|
#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL)
|
|
|
|
|
#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
|
|
|
|
|
#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val)
|
|
|
|
|
#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT)
|
|
|
|
|
#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val)
|
|
|
|
|
#define bfin_read_CHIPID() bfin_read32(CHIPID)
|
|
|
|
|
#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV)
|
|
|
|
|
#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val)
|
|
|
|
|
#define bfin_read_VR_CTL() bfin_read16(VR_CTL)
|
|
|
|
|
|
|
|
|
|
/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */
|
2007-05-21 12:09:31 +02:00
|
|
|
#define bfin_read_SWRST() bfin_read16(SWRST)
|
|
|
|
|
#define bfin_write_SWRST(val) bfin_write16(SWRST,val)
|
|
|
|
|
#define bfin_read_SYSCR() bfin_read16(SYSCR)
|
|
|
|
|
#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val)
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 23:50:22 +02:00
|
|
|
#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0)
|
|
|
|
|
#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val)
|
|
|
|
|
#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1)
|
|
|
|
|
#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1,val)
|
|
|
|
|
#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2)
|
|
|
|
|
#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2,val)
|
|
|
|
|
#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3)
|
|
|
|
|
#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3,val)
|
|
|
|
|
#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK)
|
|
|
|
|
#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK,val)
|
|
|
|
|
#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR)
|
|
|
|
|
#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR,val)
|
|
|
|
|
#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR)
|
|
|
|
|
#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR,val)
|
|
|
|
|
|
|
|
|
|
/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */
|
|
|
|
|
#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL)
|
|
|
|
|
#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL,val)
|
|
|
|
|
#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT)
|
|
|
|
|
#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT,val)
|
|
|
|
|
#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT)
|
|
|
|
|
#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT,val)
|
|
|
|
|
|
|
|
|
|
/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */
|
|
|
|
|
#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT)
|
|
|
|
|
#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT,val)
|
|
|
|
|
#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL)
|
|
|
|
|
#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL,val)
|
|
|
|
|
#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT)
|
|
|
|
|
#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT,val)
|
|
|
|
|
#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT)
|
|
|
|
|
#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT,val)
|
|
|
|
|
#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM)
|
|
|
|
|
#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM,val)
|
|
|
|
|
#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST)
|
|
|
|
|
#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST,val)
|
|
|
|
|
#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN)
|
|
|
|
|
#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val)
|
|
|
|
|
|
2007-05-21 12:09:31 +02:00
|
|
|
/* DMA Traffic controls */
|
2010-10-25 10:04:44 +02:00
|
|
|
#define bfin_read_DMAC_TC_PER() bfin_read16(DMAC_TC_PER)
|
|
|
|
|
#define bfin_write_DMAC_TC_PER(val) bfin_write16(DMAC_TC_PER,val)
|
|
|
|
|
#define bfin_read_DMAC_TC_CNT() bfin_read16(DMAC_TC_CNT)
|
|
|
|
|
#define bfin_write_DMAC_TC_CNT(val) bfin_write16(DMAC_TC_CNT,val)
|
2007-05-21 12:09:31 +02:00
|
|
|
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 23:50:22 +02:00
|
|
|
/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */
|
|
|
|
|
#define bfin_read_FIO_DIR() bfin_read16(FIO_DIR)
|
|
|
|
|
#define bfin_write_FIO_DIR(val) bfin_write16(FIO_DIR,val)
|
|
|
|
|
#define bfin_read_FIO_MASKA_C() bfin_read16(FIO_MASKA_C)
|
|
|
|
|
#define bfin_write_FIO_MASKA_C(val) bfin_write16(FIO_MASKA_C,val)
|
|
|
|
|
#define bfin_read_FIO_MASKA_S() bfin_read16(FIO_MASKA_S)
|
|
|
|
|
#define bfin_write_FIO_MASKA_S(val) bfin_write16(FIO_MASKA_S,val)
|
|
|
|
|
#define bfin_read_FIO_MASKB_C() bfin_read16(FIO_MASKB_C)
|
|
|
|
|
#define bfin_write_FIO_MASKB_C(val) bfin_write16(FIO_MASKB_C,val)
|
|
|
|
|
#define bfin_read_FIO_MASKB_S() bfin_read16(FIO_MASKB_S)
|
|
|
|
|
#define bfin_write_FIO_MASKB_S(val) bfin_write16(FIO_MASKB_S,val)
|
|
|
|
|
#define bfin_read_FIO_POLAR() bfin_read16(FIO_POLAR)
|
|
|
|
|
#define bfin_write_FIO_POLAR(val) bfin_write16(FIO_POLAR,val)
|
|
|
|
|
#define bfin_read_FIO_EDGE() bfin_read16(FIO_EDGE)
|
|
|
|
|
#define bfin_write_FIO_EDGE(val) bfin_write16(FIO_EDGE,val)
|
|
|
|
|
#define bfin_read_FIO_BOTH() bfin_read16(FIO_BOTH)
|
|
|
|
|
#define bfin_write_FIO_BOTH(val) bfin_write16(FIO_BOTH,val)
|
|
|
|
|
#define bfin_read_FIO_INEN() bfin_read16(FIO_INEN)
|
|
|
|
|
#define bfin_write_FIO_INEN(val) bfin_write16(FIO_INEN,val)
|
|
|
|
|
#define bfin_read_FIO_MASKA_D() bfin_read16(FIO_MASKA_D)
|
|
|
|
|
#define bfin_write_FIO_MASKA_D(val) bfin_write16(FIO_MASKA_D,val)
|
|
|
|
|
#define bfin_read_FIO_MASKA_T() bfin_read16(FIO_MASKA_T)
|
|
|
|
|
#define bfin_write_FIO_MASKA_T(val) bfin_write16(FIO_MASKA_T,val)
|
|
|
|
|
#define bfin_read_FIO_MASKB_D() bfin_read16(FIO_MASKB_D)
|
|
|
|
|
#define bfin_write_FIO_MASKB_D(val) bfin_write16(FIO_MASKB_D,val)
|
|
|
|
|
#define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T)
|
|
|
|
|
#define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val)
|
|
|
|
|
|
2010-10-27 04:55:28 +02:00
|
|
|
#if ANOMALY_05000311
|
|
|
|
|
/* Keep at the CPP expansion to avoid circular header dependency loops */
|
|
|
|
|
#define BFIN_WRITE_FIO_FLAG(name, val) \
|
|
|
|
|
do { \
|
|
|
|
|
unsigned long __flags; \
|
|
|
|
|
__flags = hard_local_irq_save(); \
|
|
|
|
|
bfin_write16(FIO_FLAG_##name, val); \
|
|
|
|
|
bfin_read_CHIPID(); \
|
|
|
|
|
hard_local_irq_restore(__flags); \
|
|
|
|
|
} while (0)
|
|
|
|
|
#define bfin_write_FIO_FLAG_D(val) BFIN_WRITE_FIO_FLAG(D, val)
|
|
|
|
|
#define bfin_write_FIO_FLAG_C(val) BFIN_WRITE_FIO_FLAG(C, val)
|
|
|
|
|
#define bfin_write_FIO_FLAG_S(val) BFIN_WRITE_FIO_FLAG(S, val)
|
|
|
|
|
#define bfin_write_FIO_FLAG_T(val) BFIN_WRITE_FIO_FLAG(T, val)
|
|
|
|
|
|
|
|
|
|
#define BFIN_READ_FIO_FLAG(name) \
|
|
|
|
|
({ \
|
|
|
|
|
unsigned long __flags; \
|
|
|
|
|
u16 __ret; \
|
|
|
|
|
__flags = hard_local_irq_save(); \
|
|
|
|
|
__ret = bfin_read16(FIO_FLAG_##name); \
|
|
|
|
|
bfin_read_CHIPID(); \
|
|
|
|
|
hard_local_irq_restore(__flags); \
|
|
|
|
|
__ret; \
|
|
|
|
|
})
|
|
|
|
|
#define bfin_read_FIO_FLAG_D() BFIN_READ_FIO_FLAG(D)
|
|
|
|
|
#define bfin_read_FIO_FLAG_C() BFIN_READ_FIO_FLAG(C)
|
|
|
|
|
#define bfin_read_FIO_FLAG_S() BFIN_READ_FIO_FLAG(S)
|
|
|
|
|
#define bfin_read_FIO_FLAG_T() BFIN_READ_FIO_FLAG(T)
|
|
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D, val)
|
|
|
|
|
#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C, val)
|
|
|
|
|
#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S, val)
|
|
|
|
|
#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T, val)
|
|
|
|
|
#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D)
|
|
|
|
|
#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C)
|
|
|
|
|
#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S)
|
|
|
|
|
#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T)
|
|
|
|
|
#endif
|
|
|
|
|
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 23:50:22 +02:00
|
|
|
/* DMA Controller */
|
|
|
|
|
#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG)
|
|
|
|
|
#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val)
|
|
|
|
|
#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR)
|
|
|
|
|
#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY)
|
|
|
|
|
#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY)
|
|
|
|
|
#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR)
|
|
|
|
|
#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG)
|
|
|
|
|
#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG,val)
|
|
|
|
|
#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR)
|
|
|
|
|
#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY)
|
|
|
|
|
#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY)
|
|
|
|
|
#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR)
|
|
|
|
|
#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG)
|
|
|
|
|
#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG,val)
|
|
|
|
|
#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR)
|
|
|
|
|
#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY)
|
|
|
|
|
#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY)
|
|
|
|
|
#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR)
|
|
|
|
|
#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG)
|
|
|
|
|
#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG,val)
|
|
|
|
|
#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR)
|
|
|
|
|
#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY)
|
|
|
|
|
#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY)
|
|
|
|
|
#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR)
|
|
|
|
|
#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG)
|
|
|
|
|
#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG,val)
|
|
|
|
|
#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR)
|
|
|
|
|
#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY)
|
|
|
|
|
#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY)
|
|
|
|
|
#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR)
|
|
|
|
|
#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG)
|
|
|
|
|
#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG,val)
|
|
|
|
|
#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR)
|
|
|
|
|
#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY)
|
|
|
|
|
#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY)
|
|
|
|
|
#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR)
|
|
|
|
|
#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG)
|
|
|
|
|
#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG,val)
|
|
|
|
|
#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR)
|
|
|
|
|
#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY)
|
|
|
|
|
#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY)
|
|
|
|
|
#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR)
|
|
|
|
|
#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG)
|
|
|
|
|
#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG,val)
|
|
|
|
|
#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR)
|
|
|
|
|
#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY)
|
|
|
|
|
#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY)
|
|
|
|
|
#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR)
|
|
|
|
|
#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG)
|
|
|
|
|
#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR)
|
|
|
|
|
#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY)
|
|
|
|
|
#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY)
|
|
|
|
|
#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR)
|
|
|
|
|
#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG)
|
|
|
|
|
#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR)
|
|
|
|
|
#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY)
|
|
|
|
|
#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY)
|
|
|
|
|
#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR)
|
|
|
|
|
#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG)
|
|
|
|
|
#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR)
|
|
|
|
|
#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY)
|
|
|
|
|
#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY)
|
|
|
|
|
#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR)
|
|
|
|
|
#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG)
|
|
|
|
|
#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR)
|
|
|
|
|
#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR)
|
|
|
|
|
#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY)
|
|
|
|
|
#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY)
|
|
|
|
|
#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR)
|
|
|
|
|
#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR)
|
|
|
|
|
#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT)
|
|
|
|
|
#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS)
|
|
|
|
|
#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS,val)
|
|
|
|
|
#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP)
|
|
|
|
|
#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val)
|
|
|
|
|
|
|
|
|
|
/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */
|
|
|
|
|
#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL)
|
|
|
|
|
#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val)
|
|
|
|
|
#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0)
|
|
|
|
|
#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val)
|
|
|
|
|
#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1)
|
|
|
|
|
#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val)
|
|
|
|
|
|
|
|
|
|
/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */
|
|
|
|
|
#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL)
|
|
|
|
|
#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val)
|
|
|
|
|
#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC)
|
|
|
|
|
#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val)
|
|
|
|
|
#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT)
|
|
|
|
|
#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val)
|
|
|
|
|
#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL)
|
|
|
|
|
#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL,val)
|
|
|
|
|
|
|
|
|
|
/* UART Controller */
|
|
|
|
|
#define bfin_read_UART_THR() bfin_read16(UART_THR)
|
|
|
|
|
#define bfin_write_UART_THR(val) bfin_write16(UART_THR,val)
|
|
|
|
|
#define bfin_read_UART_RBR() bfin_read16(UART_RBR)
|
|
|
|
|
#define bfin_write_UART_RBR(val) bfin_write16(UART_RBR,val)
|
|
|
|
|
#define bfin_read_UART_DLL() bfin_read16(UART_DLL)
|
|
|
|
|
#define bfin_write_UART_DLL(val) bfin_write16(UART_DLL,val)
|
|
|
|
|
#define bfin_read_UART_IER() bfin_read16(UART_IER)
|
|
|
|
|
#define bfin_write_UART_IER(val) bfin_write16(UART_IER,val)
|
|
|
|
|
#define bfin_read_UART_DLH() bfin_read16(UART_DLH)
|
|
|
|
|
#define bfin_write_UART_DLH(val) bfin_write16(UART_DLH,val)
|
|
|
|
|
#define bfin_read_UART_IIR() bfin_read16(UART_IIR)
|
|
|
|
|
#define bfin_write_UART_IIR(val) bfin_write16(UART_IIR,val)
|
|
|
|
|
#define bfin_read_UART_LCR() bfin_read16(UART_LCR)
|
|
|
|
|
#define bfin_write_UART_LCR(val) bfin_write16(UART_LCR,val)
|
|
|
|
|
#define bfin_read_UART_MCR() bfin_read16(UART_MCR)
|
|
|
|
|
#define bfin_write_UART_MCR(val) bfin_write16(UART_MCR,val)
|
|
|
|
|
#define bfin_read_UART_LSR() bfin_read16(UART_LSR)
|
|
|
|
|
#define bfin_write_UART_LSR(val) bfin_write16(UART_LSR,val)
|
|
|
|
|
/*
|
|
|
|
|
#define UART_MSR
|
|
|
|
|
*/
|
|
|
|
|
#define bfin_read_UART_SCR() bfin_read16(UART_SCR)
|
|
|
|
|
#define bfin_write_UART_SCR(val) bfin_write16(UART_SCR,val)
|
|
|
|
|
#define bfin_read_UART_GCTL() bfin_read16(UART_GCTL)
|
|
|
|
|
#define bfin_write_UART_GCTL(val) bfin_write16(UART_GCTL,val)
|
|
|
|
|
|
|
|
|
|
/* SPI Controller */
|
|
|
|
|
#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL)
|
|
|
|
|
#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val)
|
|
|
|
|
#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG)
|
|
|
|
|
#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val)
|
|
|
|
|
#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT)
|
|
|
|
|
#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val)
|
|
|
|
|
#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR)
|
|
|
|
|
#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val)
|
|
|
|
|
#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR)
|
|
|
|
|
#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val)
|
|
|
|
|
#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD)
|
|
|
|
|
#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val)
|
|
|
|
|
#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW)
|
|
|
|
|
#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val)
|
|
|
|
|
|
|
|
|
|
/* TIMER 0, 1, 2 Registers */
|
|
|
|
|
#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG)
|
|
|
|
|
#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val)
|
|
|
|
|
#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER)
|
|
|
|
|
#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val)
|
|
|
|
|
#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD)
|
|
|
|
|
#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val)
|
|
|
|
|
#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH)
|
|
|
|
|
#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG)
|
|
|
|
|
#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val)
|
|
|
|
|
#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER)
|
|
|
|
|
#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val)
|
|
|
|
|
#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD)
|
|
|
|
|
#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val)
|
|
|
|
|
#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH)
|
|
|
|
|
#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG)
|
|
|
|
|
#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val)
|
|
|
|
|
#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER)
|
|
|
|
|
#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val)
|
|
|
|
|
#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD)
|
|
|
|
|
#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val)
|
|
|
|
|
#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH)
|
|
|
|
|
#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val)
|
|
|
|
|
|
|
|
|
|
#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE)
|
|
|
|
|
#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE,val)
|
|
|
|
|
#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE)
|
|
|
|
|
#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE,val)
|
|
|
|
|
#define bfin_read_TIMER_STATUS() bfin_read16(TIMER_STATUS)
|
|
|
|
|
#define bfin_write_TIMER_STATUS(val) bfin_write16(TIMER_STATUS,val)
|
|
|
|
|
|
|
|
|
|
/* SPORT0 Controller */
|
|
|
|
|
#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1)
|
|
|
|
|
#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val)
|
|
|
|
|
#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2)
|
|
|
|
|
#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val)
|
|
|
|
|
#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV)
|
|
|
|
|
#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val)
|
|
|
|
|
#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV)
|
|
|
|
|
#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val)
|
|
|
|
|
#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX)
|
|
|
|
|
#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val)
|
|
|
|
|
#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX)
|
|
|
|
|
#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val)
|
|
|
|
|
#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX)
|
|
|
|
|
#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val)
|
|
|
|
|
#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX)
|
|
|
|
|
#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val)
|
|
|
|
|
#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX)
|
|
|
|
|
#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val)
|
|
|
|
|
#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX)
|
|
|
|
|
#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val)
|
|
|
|
|
#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1)
|
|
|
|
|
#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val)
|
|
|
|
|
#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2)
|
|
|
|
|
#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val)
|
|
|
|
|
#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV)
|
|
|
|
|
#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val)
|
|
|
|
|
#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV)
|
|
|
|
|
#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val)
|
|
|
|
|
#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT)
|
|
|
|
|
#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val)
|
|
|
|
|
#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL)
|
|
|
|
|
#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val)
|
|
|
|
|
#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1)
|
|
|
|
|
#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val)
|
|
|
|
|
#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2)
|
|
|
|
|
#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val)
|
|
|
|
|
#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0)
|
|
|
|
|
#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val)
|
|
|
|
|
#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1)
|
|
|
|
|
#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val)
|
|
|
|
|
#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2)
|
|
|
|
|
#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val)
|
|
|
|
|
#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3)
|
|
|
|
|
#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val)
|
|
|
|
|
#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0)
|
|
|
|
|
#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val)
|
|
|
|
|
#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1)
|
|
|
|
|
#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val)
|
|
|
|
|
#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2)
|
|
|
|
|
#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val)
|
|
|
|
|
#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3)
|
|
|
|
|
#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val)
|
|
|
|
|
|
|
|
|
|
/* SPORT1 Controller */
|
|
|
|
|
#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1)
|
|
|
|
|
#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val)
|
|
|
|
|
#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2)
|
|
|
|
|
#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val)
|
|
|
|
|
#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV)
|
|
|
|
|
#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val)
|
|
|
|
|
#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV)
|
|
|
|
|
#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val)
|
|
|
|
|
#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX)
|
|
|
|
|
#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val)
|
|
|
|
|
#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX)
|
|
|
|
|
#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val)
|
|
|
|
|
#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX)
|
|
|
|
|
#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val)
|
|
|
|
|
#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX)
|
|
|
|
|
#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val)
|
|
|
|
|
#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX)
|
|
|
|
|
#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val)
|
|
|
|
|
#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX)
|
|
|
|
|
#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val)
|
|
|
|
|
#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1)
|
|
|
|
|
#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val)
|
|
|
|
|
#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2)
|
|
|
|
|
#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val)
|
|
|
|
|
#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV)
|
|
|
|
|
#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val)
|
|
|
|
|
#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV)
|
|
|
|
|
#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val)
|
|
|
|
|
#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT)
|
|
|
|
|
#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val)
|
|
|
|
|
#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL)
|
|
|
|
|
#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val)
|
|
|
|
|
#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1)
|
|
|
|
|
#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val)
|
|
|
|
|
#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2)
|
|
|
|
|
#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val)
|
|
|
|
|
#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0)
|
|
|
|
|
#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val)
|
|
|
|
|
#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1)
|
|
|
|
|
#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val)
|
|
|
|
|
#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2)
|
|
|
|
|
#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val)
|
|
|
|
|
#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3)
|
|
|
|
|
#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val)
|
|
|
|
|
#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0)
|
|
|
|
|
#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val)
|
|
|
|
|
#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1)
|
|
|
|
|
#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val)
|
|
|
|
|
#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2)
|
|
|
|
|
#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val)
|
|
|
|
|
#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3)
|
|
|
|
|
#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val)
|
|
|
|
|
|
|
|
|
|
/* Parallel Peripheral Interface (PPI) */
|
|
|
|
|
#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL)
|
|
|
|
|
#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL,val)
|
|
|
|
|
#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS)
|
|
|
|
|
#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS,val)
|
|
|
|
|
#define bfin_clear_PPI_STATUS() bfin_read_PPI_STATUS()
|
|
|
|
|
#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY)
|
|
|
|
|
#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY,val)
|
|
|
|
|
#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT)
|
|
|
|
|
#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT,val)
|
|
|
|
|
#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME)
|
|
|
|
|
#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val)
|
|
|
|
|
|
|
|
|
|
#endif /* _CDEF_BF532_H */
|
