OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
  omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  OMAP4: hwmod data: Fix alignment and end of line in structurefields
  OMAP4: hwmod data: Move the DMA structures
  OMAP4: hwmod data: Move the smartreflex structures
  OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
  arm: omap: tusb6010: add name for MUSB IRQ
  arm: omap: craneboard: Add USB EHCI support
  omap2+: Initialize serial port for dynamic remuxing for n8x0
  omap2+: Add struct omap_board_data and use it for platform level serial init
  omap2+: Allow hwmod state changes to mux pads based on the state changes
  omap2+: Add support for hwmod specific muxing of devices
  omap2+: Add omap_mux_get_by_name
  OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
  OMAP4: Smartreflex framework extensions
  OMAP4: hwmod: Add inital data for smartreflex modules.
  OMAP4: PM: Program correct init voltages for scalable VDDs
  OMAP4: Adding voltage driver support
  OMAP4: Register voltage PMIC parameters with the voltage layer
  OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  ...

Fix up trivial conflict in arch/arm/plat-omap/Kconfig
This commit is contained in:
Linus Torvalds 2011-01-06 19:13:58 -08:00
parent 9e9bc97367 dc69d1af9e
commit 01539ba2a7
253 changed files with 20874 additions and 8519 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
Documentation/arm/OMAP/omap_pm
View File

@ -127,3 +127,28 @@ implementation needs:
10. (*pdata->cpu_set_freq)(unsigned long f)
11. (*pdata->cpu_get_freq)(void)
Customizing OPP for platform
============================
Defining CONFIG_PM should enable OPP layer for the silicon
and the registration of OPP table should take place automatically.
However, in special cases, the default OPP table may need to be
tweaked, for e.g.:
* enable default OPPs which are disabled by default, but which
could be enabled on a platform
* Disable an unsupported OPP on the platform
* Define and add a custom opp table entry
in these cases, the board file needs to do additional steps as follows:
arch/arm/mach-omapx/board-xyz.c
#include "pm.h"
....
static void __init omap_xyz_init_irq(void)
{
....
/* Initialize the default table */
omapx_opp_init();
/* Do customization to the defaults */
....
}
NOTE: omapx_opp_init will be omap3_opp_init or as required
based on the omap family.

14
MAINTAINERS
View File

@ -4363,6 +4363,20 @@ M: Deepak Saxena <dsaxena@plexity.net>
S: Maintained
F: drivers/char/hw_random/omap-rng.c
OMAP HWMOD SUPPORT
M: Benoît Cousson <b-cousson@ti.com>
M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod.c
F: arch/arm/plat-omap/include/plat/omap_hwmod.h
OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
M: Benoît Cousson <b-cousson@ti.com>
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
OMAP USB SUPPORT
M: Felipe Balbi <balbi@ti.com>
M: David Brownell <dbrownell@users.sourceforge.net>

121
arch/arm/configs/ams_delta_defconfig
View File

@ -1,121 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_LBDAF is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_MBOX_FWK=m
CONFIG_MACH_AMS_DELTA=y
CONFIG_OMAP_ARM_150MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IPV6=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_AMS_DELTA=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_OMAP=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_OMAP=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_6x11=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_AMS_DELTA=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_AMS_DELTA=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_NFS_FS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_BUGVERBOSE is not set

73
arch/arm/configs/htcherald_defconfig
View File

@ -1,73 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_ARCH_OMAP850=y
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_MACH_HERALD=y
CONFIG_OMAP_ARM_195MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
CONFIG_CPU_ARM925T=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_8250=m
# CONFIG_LEGACY_PTYS is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_OMAP=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_OMAP=y
CONFIG_RTC_CLASS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

138
arch/arm/configs/n770_defconfig
View File

@ -1,138 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_MUX is not set
CONFIG_OMAP_MBOX_FWK=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_NOKIA770=y
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
CONFIG_OMAP_ARM_216MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_HIDP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_NET_ETHERNET=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_PPP=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=y
CONFIG_I2C_OMAP=y
CONFIG_SPI=y
CONFIG_SPI_OMAP_UWIRE=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_OMAP=y
CONFIG_FB_OMAP_LCDC_EXTERNAL=y
CONFIG_FB_OMAP_LCDC_HWA742=y
CONFIG_FB_OMAP_MANUAL_UPDATE=y
CONFIG_FB_OMAP_LCD_MIPID=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
CONFIG_SND=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_DUMMY=y
CONFIG_SND_USB_AUDIO=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_MMC=y
CONFIG_MMC_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_ERRORS=y
CONFIG_SECURITY=y

286
arch/arm/configs/omap1_defconfig Normal file
View File

@ -0,0 +1,286 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_SHMEM is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_MUX is not set
CONFIG_OMAP_MBOX_FWK=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_ARCH_OMAP730=y
CONFIG_ARCH_OMAP850=y
CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_OMAP_INNOVATOR=y
CONFIG_MACH_OMAP_H2=y
CONFIG_MACH_OMAP_H3=y
CONFIG_MACH_OMAP_HTCWIZARD=y
CONFIG_MACH_HERALD=y
CONFIG_MACH_OMAP_OSK=y
CONFIG_MACH_OMAP_PERSEUS2=y
CONFIG_MACH_OMAP_FSAMPLE=y
CONFIG_MACH_VOICEBLUE=y
CONFIG_MACH_OMAP_PALMTE=y
CONFIG_MACH_OMAP_PALMZ71=y
CONFIG_MACH_OMAP_PALMTT=y
CONFIG_MACH_SX1=y
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
CONFIG_OMAP_ARM_216MHZ=y
CONFIG_OMAP_ARM_195MHZ=y
CONFIG_OMAP_ARM_192MHZ=y
CONFIG_OMAP_ARM_182MHZ=y
CONFIG_OMAP_ARM_168MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_OMAP_CF=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_IPV6=y
CONFIG_NETFILTER=y
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_HIDP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_NAND=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_IDE=m
CONFIG_BLK_DEV_IDECS=m
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_PHYLIB=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
CONFIG_SERIAL_8250_RUNTIME_UARTS=3
# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP_UWIRE=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_VIRTUAL=y
CONFIG_FB_OMAP=y
CONFIG_FB_OMAP_LCDC_EXTERNAL=y
CONFIG_FB_OMAP_LCDC_HWA742=y
CONFIG_FB_OMAP_MANUAL_UPDATE=y
CONFIG_FB_OMAP_LCD_MIPID=y
CONFIG_FB_OMAP_BOOTLOADER_INIT=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_MINI_4x6=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_DUMMY=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_TEST=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_FILE_STORAGE_TEST=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_OMAP=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=866
CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_UTF8=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_LIBCRC32C=y

84
arch/arm/configs/omap_generic_1510_defconfig
View File

@ -1,84 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_OMAP_ARM_168MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_MMC=y
CONFIG_MMC_OMAP=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NFS_FS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y

87
arch/arm/configs/omap_generic_1610_defconfig
View File

@ -1,87 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_OMAP_ARM_192MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_MMC=y
CONFIG_MMC_OMAP=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NFS_FS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y

75
arch/arm/configs/omap_generic_1710_defconfig
View File

@ -1,75 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
# CONFIG_OMAP_MUX is not set
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_OMAP_ARM_192MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
CONFIG_FPE_NWFPE=y
CONFIG_ARTHUR=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_USB_USBNET=y
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
CONFIG_PPP=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_ERRORS=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y

109
arch/arm/configs/omap_h2_1610_defconfig
View File

@ -1,109 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_OMAP_H2=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEBUG_DRIVER=y
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
CONFIG_PPP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=y
CONFIG_I2C_OMAP=y
CONFIG_SPI=y
CONFIG_SPI_OMAP_UWIRE=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_OMAP=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_TEST=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_OMAP=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y

102
arch/arm/configs/omap_innovator_1510_defconfig
View File

@ -1,102 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_MACH_OMAP_INNOVATOR=y
CONFIG_OMAP_ARM_168MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
CONFIG_PREEMPT=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_OMAP=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_MMC=y
CONFIG_MMC_OMAP=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_INOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m

58
arch/arm/configs/omap_innovator_1610_defconfig
View File

@ -1,58 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_OMAP_INNOVATOR=y
CONFIG_OMAP_ARM_192MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_DCACHE_WRITETHROUGH=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_OMAP=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y

87
arch/arm/configs/omap_osk_5912_defconfig
View File

@ -1,87 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_32K_TIMER=y
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_OMAP_OSK=y
CONFIG_OMAP_ARM_192MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_OMAP_CF=y
CONFIG_NO_HZ=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_IDE=m
CONFIG_BLK_DEV_IDECS=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_OMAP=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m

65
arch/arm/configs/omap_perseus2_730_defconfig
View File

@ -1,65 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_ARCH_OMAP730=y
# CONFIG_ARCH_OMAP15XX is not set
CONFIG_MACH_OMAP_PERSEUS2=y
CONFIG_OMAP_ARM_182MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_NAND=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_SMC91X=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_VIRTUAL=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y

48
arch/arm/configs/palmte_defconfig
View File

@ -1,48 +0,0 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_MACH_OMAP_PALMTE=y
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_OMAP=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_CRC_CCITT=y

56
arch/arm/configs/palmtt_defconfig
View File

@ -1,56 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_MACH_OMAP_PALMTT=y
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_SERIO is not set
CONFIG_SPI=y
CONFIG_SPI_OMAP_UWIRE=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_OMAP=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_LIBCRC32C=y

53
arch/arm/configs/palmz71_defconfig
View File

@ -1,53 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_LOCALVERSION="-z71"
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_MACH_OMAP_PALMZ71=y
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SPI=y
CONFIG_SPI_OMAP_UWIRE=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_OMAP=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_MMC=y
CONFIG_MMC_OMAP=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_LIBCRC32C=y

110
arch/arm/configs/sx1_defconfig
View File

@ -1,110 +0,0 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_SHMEM is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_MBOX_FWK=y
CONFIG_MACH_SX1=y
CONFIG_OMAP_ARM_168MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_FW_LOADER is not set
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_OMAP=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_OMAP=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_OMAP=y
CONFIG_FB_OMAP_BOOTLOADER_INIT=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_OMAP=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_EXT2_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=866
CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_UTF8=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_LIBCRC32C=y

12
arch/arm/include/asm/hardware/cache-l2x0.h
View File

@ -59,7 +59,17 @@
#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
#define L2X0_CACHE_ID_PART_L210 (1 << 6)
#define L2X0_CACHE_ID_PART_L310 (3 << 6)
#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17)
#define L2X0_AUX_CTRL_MASK 0xc0000fff
#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16
#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17
#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17)
#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22
#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26
#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27
#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT 28
#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29
#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30
#ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);

11
arch/arm/mach-omap1/Kconfig
View File

@ -152,20 +152,11 @@ config MACH_NOKIA770
config MACH_AMS_DELTA
bool "Amstrad E3 (Delta)"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
select FIQ
help
Support for the Amstrad E3 (codename Delta) videophone. Say Y here
if you have such a device.
config AMS_DELTA_FIQ
bool "Fast Interrupt Request (FIQ) support for the E3"
depends on MACH_AMS_DELTA
select FIQ
help
Provide a FIQ handler for the E3.
This allows for fast handling of interrupts generated
by the clock line of the E3 mailboard (or a PS/2 keyboard)
connected to the GPIO based external keyboard port.
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)

12
arch/arm/mach-omap1/Makefile
View File

@ -3,7 +3,7 @@
#
# Common support
obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
@ -39,8 +39,8 @@ obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o
obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o
obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o
obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o
obj-$(CONFIG_AMS_DELTA_FIQ) += ams-delta-fiq.o ams-delta-fiq-handler.o
obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o ams-delta-fiq.o \
ams-delta-fiq-handler.o
obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o
obj-$(CONFIG_MACH_HERALD) += board-htcherald.o
@ -49,6 +49,12 @@ ifeq ($(CONFIG_ARCH_OMAP15XX),y)
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o
endif
# GPIO
obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
# LEDs support
led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o

133
arch/arm/mach-omap1/board-ams-delta.c
View File

@ -28,6 +28,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/io.h>
#include <plat/board-ams-delta.h>
#include <mach/gpio.h>
#include <plat/keypad.h>
@ -42,84 +43,82 @@
static u8 ams_delta_latch1_reg;
static u16 ams_delta_latch2_reg;
static int ams_delta_keymap[] = {
static const unsigned int ams_delta_keymap[] = {
KEY(0, 0, KEY_F1), /* Advert */
KEY(3, 0, KEY_COFFEE), /* Games */
KEY(2, 0, KEY_QUESTION), /* Directory */
KEY(3, 2, KEY_CONNECT), /* Internet */
KEY(2, 1, KEY_SHOP), /* Services */
KEY(0, 3, KEY_COFFEE), /* Games */
KEY(0, 2, KEY_QUESTION), /* Directory */
KEY(2, 3, KEY_CONNECT), /* Internet */
KEY(1, 2, KEY_SHOP), /* Services */
KEY(1, 1, KEY_PHONE), /* VoiceMail */
KEY(1, 0, KEY_DELETE), /* Delete */
KEY(0, 1, KEY_DELETE), /* Delete */
KEY(2, 2, KEY_PLAY), /* Play */
KEY(0, 1, KEY_PAGEUP), /* Up */
KEY(3, 1, KEY_PAGEDOWN), /* Down */
KEY(0, 2, KEY_EMAIL), /* ReadEmail */
KEY(1, 2, KEY_STOP), /* Stop */
KEY(1, 0, KEY_PAGEUP), /* Up */
KEY(1, 3, KEY_PAGEDOWN), /* Down */
KEY(2, 0, KEY_EMAIL), /* ReadEmail */
KEY(2, 1, KEY_STOP), /* Stop */
/* Numeric keypad portion */
KEY(7, 0, KEY_KP1),
KEY(6, 0, KEY_KP2),
KEY(5, 0, KEY_KP3),
KEY(7, 1, KEY_KP4),
KEY(6, 1, KEY_KP5),
KEY(5, 1, KEY_KP6),
KEY(7, 2, KEY_KP7),
KEY(6, 2, KEY_KP8),
KEY(5, 2, KEY_KP9),
KEY(6, 3, KEY_KP0),
KEY(7, 3, KEY_KPASTERISK),
KEY(5, 3, KEY_KPDOT), /* # key */
KEY(2, 7, KEY_NUMLOCK), /* Mute */
KEY(1, 7, KEY_KPMINUS), /* Recall */
KEY(1, 6, KEY_KPPLUS), /* Redial */
KEY(6, 7, KEY_KPSLASH), /* Handsfree */
KEY(0, 6, KEY_ENTER), /* Video */
KEY(0, 7, KEY_KP1),
KEY(0, 6, KEY_KP2),
KEY(0, 5, KEY_KP3),
KEY(1, 7, KEY_KP4),
KEY(1, 6, KEY_KP5),
KEY(1, 5, KEY_KP6),
KEY(2, 7, KEY_KP7),
KEY(2, 6, KEY_KP8),
KEY(2, 5, KEY_KP9),
KEY(3, 6, KEY_KP0),
KEY(3, 7, KEY_KPASTERISK),
KEY(3, 5, KEY_KPDOT), /* # key */
KEY(7, 2, KEY_NUMLOCK), /* Mute */
KEY(7, 1, KEY_KPMINUS), /* Recall */
KEY(6, 1, KEY_KPPLUS), /* Redial */
KEY(7, 6, KEY_KPSLASH), /* Handsfree */
KEY(6, 0, KEY_ENTER), /* Video */
KEY(4, 7, KEY_CAMERA), /* Photo */
KEY(7, 4, KEY_CAMERA), /* Photo */
KEY(4, 0, KEY_F2), /* Home */
KEY(4, 1, KEY_F3), /* Office */
KEY(4, 2, KEY_F4), /* Mobile */
KEY(0, 4, KEY_F2), /* Home */
KEY(1, 4, KEY_F3), /* Office */
KEY(2, 4, KEY_F4), /* Mobile */
KEY(7, 7, KEY_F5), /* SMS */
KEY(5, 7, KEY_F6), /* Email */
KEY(7, 5, KEY_F6), /* Email */
/* QWERTY portion of keypad */
KEY(4, 3, KEY_Q),
KEY(3, 4, KEY_Q),
KEY(3, 3, KEY_W),
KEY(2, 3, KEY_E),
KEY(1, 3, KEY_R),
KEY(0, 3, KEY_T),
KEY(7, 4, KEY_Y),
KEY(6, 4, KEY_U),
KEY(5, 4, KEY_I),
KEY(3, 2, KEY_E),
KEY(3, 1, KEY_R),
KEY(3, 0, KEY_T),
KEY(4, 7, KEY_Y),
KEY(4, 6, KEY_U),
KEY(4, 5, KEY_I),
KEY(4, 4, KEY_O),
KEY(3, 4, KEY_P),
KEY(4, 3, KEY_P),
KEY(2, 4, KEY_A),
KEY(1, 4, KEY_S),
KEY(0, 4, KEY_D),
KEY(7, 5, KEY_F),
KEY(6, 5, KEY_G),
KEY(4, 2, KEY_A),
KEY(4, 1, KEY_S),
KEY(4, 0, KEY_D),
KEY(5, 7, KEY_F),
KEY(5, 6, KEY_G),
KEY(5, 5, KEY_H),
KEY(4, 5, KEY_J),
KEY(3, 5, KEY_K),
KEY(2, 5, KEY_L),
KEY(5, 4, KEY_J),
KEY(5, 3, KEY_K),
KEY(5, 2, KEY_L),
KEY(1, 5, KEY_Z),
KEY(0, 5, KEY_X),
KEY(7, 6, KEY_C),
KEY(5, 1, KEY_Z),
KEY(5, 0, KEY_X),
KEY(6, 7, KEY_C),
KEY(6, 6, KEY_V),
KEY(5, 6, KEY_B),
KEY(4, 6, KEY_N),
KEY(3, 6, KEY_M),
KEY(2, 6, KEY_SPACE),
KEY(6, 5, KEY_B),
KEY(6, 4, KEY_N),
KEY(6, 3, KEY_M),
KEY(6, 2, KEY_SPACE),
KEY(0, 7, KEY_LEFTSHIFT), /* Vol up */
KEY(3, 7, KEY_LEFTCTRL), /* Vol down */
0
KEY(7, 0, KEY_LEFTSHIFT), /* Vol up */
KEY(7, 3, KEY_LEFTCTRL), /* Vol down */
};
void ams_delta_latch1_write(u8 mask, u8 value)
@ -140,7 +139,6 @@ static void __init ams_delta_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
static struct map_desc ams_delta_io_desc[] __initdata = {
@ -189,11 +187,15 @@ static struct resource ams_delta_kp_resources[] = {
},
};
static const struct matrix_keymap_data ams_delta_keymap_data = {
.keymap = ams_delta_keymap,
.keymap_size = ARRAY_SIZE(ams_delta_keymap),
};
static struct omap_kp_platform_data ams_delta_kp_data = {
.rows = 8,
.cols = 8,
.keymap = ams_delta_keymap,
.keymapsize = ARRAY_SIZE(ams_delta_keymap),
.keymap_data = &ams_delta_keymap_data,
.delay = 9,
};
@ -307,16 +309,14 @@ static void __init ams_delta_init(void)
#endif
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
#ifdef CONFIG_AMS_DELTA_FIQ
ams_delta_init_fiq();
#endif
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
.membase = (void *) AMS_DELTA_MODEM_VIRT,
.membase = IOMEM(AMS_DELTA_MODEM_VIRT),
.mapbase = AMS_DELTA_MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
@ -340,6 +340,9 @@ static int __init ams_delta_modem_init(void)
{
int err;
if (!machine_is_ams_delta())
return -ENODEV;
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq =
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);

89
arch/arm/mach-omap1/board-fsample.c
View File

@ -69,36 +69,35 @@
#define fsample_cpld_clear(bit) \
fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
static int fsample_keymap[] = {
KEY(0,0,KEY_UP),
KEY(0,1,KEY_RIGHT),
KEY(0,2,KEY_LEFT),
KEY(0,3,KEY_DOWN),
KEY(0,4,KEY_ENTER),
KEY(1,0,KEY_F10),
KEY(1,1,KEY_SEND),
KEY(1,2,KEY_END),
KEY(1,3,KEY_VOLUMEDOWN),
KEY(1,4,KEY_VOLUMEUP),
KEY(1,5,KEY_RECORD),
KEY(2,0,KEY_F9),
KEY(2,1,KEY_3),
KEY(2,2,KEY_6),
KEY(2,3,KEY_9),
KEY(2,4,KEY_KPDOT),
KEY(3,0,KEY_BACK),
KEY(3,1,KEY_2),
KEY(3,2,KEY_5),
KEY(3,3,KEY_8),
KEY(3,4,KEY_0),
KEY(3,5,KEY_KPSLASH),
KEY(4,0,KEY_HOME),
KEY(4,1,KEY_1),
KEY(4,2,KEY_4),
KEY(4,3,KEY_7),
KEY(4,4,KEY_KPASTERISK),
KEY(4,5,KEY_POWER),
0
static const unsigned int fsample_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_LEFT),
KEY(3, 0, KEY_DOWN),
KEY(4, 0, KEY_ENTER),
KEY(0, 1, KEY_F10),
KEY(1, 1, KEY_SEND),
KEY(2, 1, KEY_END),
KEY(3, 1, KEY_VOLUMEDOWN),
KEY(4, 1, KEY_VOLUMEUP),
KEY(5, 1, KEY_RECORD),
KEY(0, 2, KEY_F9),
KEY(1, 2, KEY_3),
KEY(2, 2, KEY_6),
KEY(3, 2, KEY_9),
KEY(4, 2, KEY_KPDOT),
KEY(0, 3, KEY_BACK),
KEY(1, 3, KEY_2),
KEY(2, 3, KEY_5),
KEY(3, 3, KEY_8),
KEY(4, 3, KEY_0),
KEY(5, 3, KEY_KPSLASH),
KEY(0, 4, KEY_HOME),
KEY(1, 4, KEY_1),
KEY(2, 4, KEY_4),
KEY(3, 4, KEY_7),
KEY(4, 4, KEY_KPASTERISK),
KEY(5, 4, KEY_POWER),
};
static struct smc91x_platdata smc91x_info = {
@ -120,6 +119,15 @@ static struct resource smc91x_resources[] = {
},
};
static void __init fsample_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
static struct mtd_partition nor_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
@ -244,11 +252,15 @@ static struct resource kp_resources[] = {
},
};
static const struct matrix_keymap_data fsample_keymap_data = {
.keymap = fsample_keymap,
.keymap_size = ARRAY_SIZE(fsample_keymap),
};
static struct omap_kp_platform_data kp_data = {
.rows = 8,
.cols = 8,
.keymap = fsample_keymap,
.keymapsize = ARRAY_SIZE(fsample_keymap),
.keymap_data = &fsample_keymap_data,
.delay = 4,
};
@ -285,6 +297,8 @@ static struct omap_board_config_kernel fsample_config[] = {
static void __init omap_fsample_init(void)
{
fsample_init_smc91x();
if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
@ -312,21 +326,10 @@ static void __init omap_fsample_init(void)
omap_register_i2c_bus(1, 100, NULL, 0);
}
static void __init fsample_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
static void __init omap_fsample_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
fsample_init_smc91x();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */

79
arch/arm/mach-omap1/board-h2.c
View File

@ -52,43 +52,42 @@
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
static int h2_keymap[] = {
static const unsigned int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_3),
KEY(0, 3, KEY_F10),
KEY(0, 4, KEY_F5),
KEY(0, 5, KEY_9),
KEY(1, 0, KEY_DOWN),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_3),
KEY(3, 0, KEY_F10),
KEY(4, 0, KEY_F5),
KEY(5, 0, KEY_9),
KEY(0, 1, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_2),
KEY(1, 3, KEY_F9),
KEY(1, 4, KEY_F7),
KEY(1, 5, KEY_0),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_6),
KEY(2, 1, KEY_2),
KEY(3, 1, KEY_F9),
KEY(4, 1, KEY_F7),
KEY(5, 1, KEY_0),
KEY(0, 2, KEY_ENTER),
KEY(1, 2, KEY_6),
KEY(2, 2, KEY_1),
KEY(2, 3, KEY_F2),
KEY(2, 4, KEY_F6),
KEY(2, 5, KEY_HOME),
KEY(3, 0, KEY_8),
KEY(3, 1, KEY_5),
KEY(3, 2, KEY_F12),
KEY(3, 2, KEY_F2),
KEY(4, 2, KEY_F6),
KEY(5, 2, KEY_HOME),
KEY(0, 3, KEY_8),
KEY(1, 3, KEY_5),
KEY(2, 3, KEY_F12),
KEY(3, 3, KEY_F3),
KEY(3, 4, KEY_F8),
KEY(3, 5, KEY_END),
KEY(4, 0, KEY_7),
KEY(4, 1, KEY_4),
KEY(4, 2, KEY_F11),
KEY(4, 3, KEY_F1),
KEY(4, 3, KEY_F8),
KEY(5, 3, KEY_END),
KEY(0, 4, KEY_7),
KEY(1, 4, KEY_4),
KEY(2, 4, KEY_F11),
KEY(3, 4, KEY_F1),
KEY(4, 4, KEY_F4),
KEY(4, 5, KEY_ESC),
KEY(5, 0, KEY_F13),
KEY(5, 1, KEY_F14),
KEY(5, 2, KEY_F15),
KEY(5, 3, KEY_F16),
KEY(5, 4, KEY_SLEEP),
0
KEY(5, 4, KEY_ESC),
KEY(0, 5, KEY_F13),
KEY(1, 5, KEY_F14),
KEY(2, 5, KEY_F15),
KEY(3, 5, KEY_F16),
KEY(4, 5, KEY_SLEEP),
};
static struct mtd_partition h2_nor_partitions[] = {
@ -270,14 +269,18 @@ static struct resource h2_kp_resources[] = {
},
};
static const struct matrix_keymap_data h2_keymap_data = {
.keymap = h2_keymap,
.keymap_size = ARRAY_SIZE(h2_keymap),
};
static struct omap_kp_platform_data h2_kp_data = {
.rows = 8,
.cols = 8,
.keymap = h2_keymap,
.keymapsize = ARRAY_SIZE(h2_keymap),
.rep = 1,
.keymap_data = &h2_keymap_data,
.rep = true,
.delay = 9,
.dbounce = 1,
.dbounce = true,
};
static struct platform_device h2_kp_device = {
@ -374,8 +377,6 @@ static void __init h2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
h2_init_smc91x();
}
static struct omap_usb_config h2_usb_config __initdata = {
@ -403,6 +404,8 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
static void __init h2_init(void)
{
h2_init_smc91x();
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
* notice whether a NAND chip is enabled at probe time.

97
arch/arm/mach-omap1/board-h3.c
View File

@ -56,43 +56,42 @@
#define H3_TS_GPIO 48
static int h3_keymap[] = {
static const unsigned int h3_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_3),
KEY(0, 3, KEY_F10),
KEY(0, 4, KEY_F5),
KEY(0, 5, KEY_9),
KEY(1, 0, KEY_DOWN),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_3),
KEY(3, 0, KEY_F10),
KEY(4, 0, KEY_F5),
KEY(5, 0, KEY_9),
KEY(0, 1, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_2),
KEY(1, 3, KEY_F9),
KEY(1, 4, KEY_F7),
KEY(1, 5, KEY_0),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_6),
KEY(2, 1, KEY_2),
KEY(3, 1, KEY_F9),
KEY(4, 1, KEY_F7),
KEY(5, 1, KEY_0),
KEY(0, 2, KEY_ENTER),
KEY(1, 2, KEY_6),
KEY(2, 2, KEY_1),
KEY(2, 3, KEY_F2),
KEY(2, 4, KEY_F6),
KEY(2, 5, KEY_HOME),
KEY(3, 0, KEY_8),
KEY(3, 1, KEY_5),
KEY(3, 2, KEY_F12),
KEY(3, 2, KEY_F2),
KEY(4, 2, KEY_F6),
KEY(5, 2, KEY_HOME),
KEY(0, 3, KEY_8),
KEY(1, 3, KEY_5),
KEY(2, 3, KEY_F12),
KEY(3, 3, KEY_F3),
KEY(3, 4, KEY_F8),
KEY(3, 5, KEY_END),
KEY(4, 0, KEY_7),
KEY(4, 1, KEY_4),
KEY(4, 2, KEY_F11),
KEY(4, 3, KEY_F1),
KEY(4, 3, KEY_F8),
KEY(5, 3, KEY_END),
KEY(0, 4, KEY_7),
KEY(1, 4, KEY_4),
KEY(2, 4, KEY_F11),
KEY(3, 4, KEY_F1),
KEY(4, 4, KEY_F4),
KEY(4, 5, KEY_ESC),
KEY(5, 0, KEY_F13),
KEY(5, 1, KEY_F14),
KEY(5, 2, KEY_F15),
KEY(5, 3, KEY_F16),
KEY(5, 4, KEY_SLEEP),
0
KEY(5, 4, KEY_ESC),
KEY(0, 5, KEY_F13),
KEY(1, 5, KEY_F14),
KEY(2, 5, KEY_F15),
KEY(3, 5, KEY_F16),
KEY(4, 5, KEY_SLEEP),
};
@ -264,6 +263,15 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
static void __init h3_init_smc91x(void)
{
omap_cfg_reg(W15_1710_GPIO40);
if (gpio_request(40, "SMC91x irq") < 0) {
printk("Error requesting gpio 40 for smc91x irq\n");
return;
}
}
#define GPTIMER_BASE 0xFFFB1400
#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800))
#define GPTIMER_REGS_SIZE 0x46
@ -296,14 +304,18 @@ static struct resource h3_kp_resources[] = {
},
};
static const struct matrix_keymap_data h3_keymap_data = {
.keymap = h3_keymap,
.keymap_size = ARRAY_SIZE(h3_keymap),
};
static struct omap_kp_platform_data h3_kp_data = {
.rows = 8,
.cols = 8,
.keymap = h3_keymap,
.keymapsize = ARRAY_SIZE(h3_keymap),
.rep = 1,
.keymap_data = &h3_keymap_data,
.rep = true,
.delay = 9,
.dbounce = 1,
.dbounce = true,
};
static struct platform_device h3_kp_device = {
@ -376,6 +388,8 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
static void __init h3_init(void)
{
h3_init_smc91x();
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
* notice whether a NAND chip is enabled at probe time.
@ -422,21 +436,10 @@ static void __init h3_init(void)
h3_mmc_init();
}
static void __init h3_init_smc91x(void)
{
omap_cfg_reg(W15_1710_GPIO40);
if (gpio_request(40, "SMC91x irq") < 0) {
printk("Error requesting gpio 40 for smc91x irq\n");
return;
}
}
static void __init h3_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
h3_init_smc91x();
}
static void __init h3_map_io(void)

102
arch/arm/mach-omap1/board-htcherald.c
View File

@ -180,64 +180,68 @@
/* Keyboard definition */
static int htc_herald_keymap[] = {
static const unsigned int htc_herald_keymap[] = {
KEY(0, 0, KEY_RECORD), /* Mail button */
KEY(0, 1, KEY_CAMERA), /* Camera */
KEY(0, 2, KEY_PHONE), /* Send key */
KEY(0, 3, KEY_VOLUMEUP), /* Volume up */
KEY(0, 4, KEY_F2), /* Right bar (landscape) */
KEY(0, 5, KEY_MAIL), /* Win key (portrait) */
KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */
KEY(1, 0, KEY_LEFTCTRL), /* Windows key */
KEY(1, 0, KEY_CAMERA), /* Camera */
KEY(2, 0, KEY_PHONE), /* Send key */
KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
KEY(4, 0, KEY_F2), /* Right bar (landscape) */
KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */
KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
KEY(1, 1, KEY_COMMA),
KEY(1, 2, KEY_M),
KEY(1, 3, KEY_K),
KEY(1, 4, KEY_SLASH), /* OK key */
KEY(1, 5, KEY_I),
KEY(1, 6, KEY_U),
KEY(2, 0, KEY_LEFTALT),
KEY(2, 1, KEY_TAB),
KEY(2, 1, KEY_M),
KEY(3, 1, KEY_K),
KEY(4, 1, KEY_SLASH), /* OK key */
KEY(5, 1, KEY_I),
KEY(6, 1, KEY_U),
KEY(0, 2, KEY_LEFTALT),
KEY(1, 2, KEY_TAB),
KEY(2, 2, KEY_N),
KEY(2, 3, KEY_J),
KEY(2, 4, KEY_ENTER),
KEY(2, 5, KEY_H),
KEY(2, 6, KEY_Y),
KEY(3, 0, KEY_SPACE),
KEY(3, 1, KEY_L),
KEY(3, 2, KEY_B),
KEY(3, 2, KEY_J),
KEY(4, 2, KEY_ENTER),
KEY(5, 2, KEY_H),
KEY(6, 2, KEY_Y),
KEY(0, 3, KEY_SPACE),
KEY(1, 3, KEY_L),
KEY(2, 3, KEY_B),
KEY(3, 3, KEY_V),
KEY(3, 4, KEY_BACKSPACE),
KEY(3, 5, KEY_G),
KEY(3, 6, KEY_T),
KEY(4, 0, KEY_CAPSLOCK), /* Shift */
KEY(4, 1, KEY_C),
KEY(4, 2, KEY_F),
KEY(4, 3, KEY_R),
KEY(4, 3, KEY_BACKSPACE),
KEY(5, 3, KEY_G),
KEY(6, 3, KEY_T),
KEY(0, 4, KEY_CAPSLOCK), /* Shift */
KEY(1, 4, KEY_C),
KEY(2, 4, KEY_F),
KEY(3, 4, KEY_R),
KEY(4, 4, KEY_O),
KEY(4, 5, KEY_E),
KEY(4, 6, KEY_D),
KEY(5, 0, KEY_X),
KEY(5, 1, KEY_Z),
KEY(5, 2, KEY_S),
KEY(5, 3, KEY_W),
KEY(5, 4, KEY_P),
KEY(5, 4, KEY_E),
KEY(6, 4, KEY_D),
KEY(0, 5, KEY_X),
KEY(1, 5, KEY_Z),
KEY(2, 5, KEY_S),
KEY(3, 5, KEY_W),
KEY(4, 5, KEY_P),
KEY(5, 5, KEY_Q),
KEY(5, 6, KEY_A),
KEY(6, 0, KEY_CONNECT), /* Voice button */
KEY(6, 2, KEY_CANCEL), /* End key */
KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */
KEY(6, 4, KEY_F1), /* Left bar (landscape) */
KEY(6, 5, KEY_WWW), /* OK button (portrait) */
KEY(6, 5, KEY_A),
KEY(0, 6, KEY_CONNECT), /* Voice button */
KEY(2, 6, KEY_CANCEL), /* End key */
KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */
KEY(4, 6, KEY_F1), /* Left bar (landscape) */
KEY(5, 6, KEY_WWW), /* OK button (portrait) */
KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
0
};
struct omap_kp_platform_data htcherald_kp_data = {
static const struct matrix_keymap_data htc_herald_keymap_data = {
.keymap = htc_herald_keymap,
.keymap_size = ARRAY_SIZE(htc_herald_keymap),
};
static struct omap_kp_platform_data htcherald_kp_data = {
.rows = 7,
.cols = 7,
.delay = 20,
.rep = 1,
.keymap = htc_herald_keymap,
.rep = true,
.keymap_data = &htc_herald_keymap_data,
};
static struct resource kp_resources[] = {
@ -278,7 +282,7 @@ static struct gpio_keys_button herald_gpio_keys_table[] = {
static struct gpio_keys_platform_data herald_gpio_keys_data = {
.buttons = herald_gpio_keys_table,
.nbuttons = ARRAY_SIZE(herald_gpio_keys_table),
.rep = 1,
.rep = true,
};
static struct platform_device herald_gpiokeys_device = {
@ -439,7 +443,7 @@ static const struct ads7846_platform_data htcherald_ts_platform_data = {
.keep_vref_on = 1,
.x_plate_ohms = 496,
.gpio_pendown = HTCHERALD_GPIO_TS,
.pressure_max = 100000,
.pressure_max = 10000,
.pressure_min = 5000,
.x_min = 528,
.x_max = 3760,
@ -577,8 +581,6 @@ static void __init htcherald_init(void)
printk(KERN_INFO "HTC Herald init.\n");
/* Do board initialization before we register all the devices */
omap_gpio_init();
omap_board_config = htcherald_config;
omap_board_config_size = ARRAY_SIZE(htcherald_config);
platform_add_devices(devices, ARRAY_SIZE(devices));

32
arch/arm/mach-omap1/board-innovator.c
View File

@ -44,17 +44,16 @@
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300
static int innovator_keymap[] = {
static const unsigned int innovator_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(0, 3, KEY_DOWN),
KEY(3, 0, KEY_DOWN),
KEY(1, 1, KEY_F2),
KEY(1, 2, KEY_RIGHT),
KEY(2, 0, KEY_F3),
KEY(2, 1, KEY_F4),
KEY(2, 1, KEY_RIGHT),
KEY(0, 2, KEY_F3),
KEY(1, 2, KEY_F4),
KEY(2, 2, KEY_UP),
KEY(3, 2, KEY_ENTER),
KEY(2, 3, KEY_ENTER),
KEY(3, 3, KEY_LEFT),
0
};
static struct mtd_partition innovator_partitions[] = {
@ -126,11 +125,15 @@ static struct resource innovator_kp_resources[] = {
},
};
static const struct matrix_keymap_data innovator_keymap_data = {
.keymap = innovator_keymap,
.keymap_size = ARRAY_SIZE(innovator_keymap),
};
static struct omap_kp_platform_data innovator_kp_data = {
.rows = 8,
.cols = 8,
.keymap = innovator_keymap,
.keymapsize = ARRAY_SIZE(innovator_keymap),
.keymap_data = &innovator_keymap_data,
.delay = 4,
};
@ -290,13 +293,6 @@ static void __init innovator_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap1510_fpga_init_irq();
}
#endif
innovator_init_smc91x();
}
#ifdef CONFIG_ARCH_OMAP15XX
@ -387,6 +383,10 @@ static struct omap_board_config_kernel innovator_config[] = {
static void __init innovator_init(void)
{
if (cpu_is_omap1510())
omap1510_fpga_init_irq();
innovator_init_smc91x();
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
unsigned char reg;

30
arch/arm/mach-omap1/board-nokia770.c
View File

@ -54,19 +54,18 @@ static void __init omap_nokia770_init_irq(void)
omap_init_irq();
}
static int nokia770_keymap[] = {
KEY(0, 1, GROUP_0 | KEY_UP),
KEY(0, 2, GROUP_1 | KEY_F5),
KEY(1, 0, GROUP_0 | KEY_LEFT),
static const unsigned int nokia770_keymap[] = {
KEY(1, 0, GROUP_0 | KEY_UP),
KEY(2, 0, GROUP_1 | KEY_F5),
KEY(0, 1, GROUP_0 | KEY_LEFT),
KEY(1, 1, GROUP_0 | KEY_ENTER),
KEY(1, 2, GROUP_0 | KEY_RIGHT),
KEY(2, 0, GROUP_1 | KEY_ESC),
KEY(2, 1, GROUP_0 | KEY_DOWN),
KEY(2, 1, GROUP_0 | KEY_RIGHT),
KEY(0, 2, GROUP_1 | KEY_ESC),
KEY(1, 2, GROUP_0 | KEY_DOWN),
KEY(2, 2, GROUP_1 | KEY_F4),
KEY(3, 0, GROUP_2 | KEY_F7),
KEY(3, 1, GROUP_2 | KEY_F8),
KEY(3, 2, GROUP_2 | KEY_F6),
0
KEY(0, 3, GROUP_2 | KEY_F7),
KEY(1, 3, GROUP_2 | KEY_F8),
KEY(2, 3, GROUP_2 | KEY_F6),
};
static struct resource nokia770_kp_resources[] = {
@ -77,11 +76,15 @@ static struct resource nokia770_kp_resources[] = {
},
};
static const struct matrix_keymap_data nokia770_keymap_data = {
.keymap = nokia770_keymap,
.keymap_size = ARRAY_SIZE(nokia770_keymap),
};
static struct omap_kp_platform_data nokia770_kp_data = {
.rows = 8,
.cols = 8,
.keymap = nokia770_keymap,
.keymapsize = ARRAY_SIZE(nokia770_keymap),
.keymap_data = &nokia770_keymap_data,
.delay = 4,
};
@ -246,7 +249,6 @@ static void __init omap_nokia770_init(void)
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
omap_gpio_init();
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
hwa742_dev_init();

27
arch/arm/mach-omap1/board-osk.c
View File

@ -283,9 +283,6 @@ static void __init osk_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
osk_init_smc91x();
osk_init_cf();
}
static struct omap_usb_config osk_usb_config __initdata = {
@ -341,25 +338,28 @@ static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
*/
};
static const int osk_keymap[] = {
static const unsigned int osk_keymap[] = {
/* KEY(col, row, code) */
KEY(0, 0, KEY_F1), /* SW4 */
KEY(0, 3, KEY_UP), /* (sw2/up) */
KEY(3, 0, KEY_UP), /* (sw2/up) */
KEY(1, 1, KEY_LEFTCTRL), /* SW5 */
KEY(1, 2, KEY_LEFT), /* (sw2/left) */
KEY(2, 0, KEY_SPACE), /* SW3 */
KEY(2, 1, KEY_ESC), /* SW6 */
KEY(2, 1, KEY_LEFT), /* (sw2/left) */
KEY(0, 2, KEY_SPACE), /* SW3 */
KEY(1, 2, KEY_ESC), /* SW6 */
KEY(2, 2, KEY_DOWN), /* (sw2/down) */
KEY(3, 2, KEY_ENTER), /* (sw2/select) */
KEY(2, 3, KEY_ENTER), /* (sw2/select) */
KEY(3, 3, KEY_RIGHT), /* (sw2/right) */
0
};
static const struct matrix_keymap_data osk_keymap_data = {
.keymap = osk_keymap,
.keymap_size = ARRAY_SIZE(osk_keymap),
};
static struct omap_kp_platform_data osk_kp_data = {
.rows = 8,
.cols = 8,
.keymap = (int *) osk_keymap,
.keymapsize = ARRAY_SIZE(osk_keymap),
.keymap_data = &osk_keymap_data,
.delay = 9,
};
@ -541,6 +541,9 @@ static void __init osk_init(void)
{
u32 l;
osk_init_smc91x();
osk_init_cf();
/* Workaround for wrong CS3 (NOR flash) timing
* There are some U-Boot versions out there which configure
* wrong CS3 memory timings. This mainly leads to CRC

29
arch/arm/mach-omap1/board-palmte.c
View File

@ -63,28 +63,31 @@ static void __init omap_palmte_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
static const int palmte_keymap[] = {
static const unsigned int palmte_keymap[] = {
KEY(0, 0, KEY_F1), /* Calendar */
KEY(0, 1, KEY_F2), /* Contacts */
KEY(0, 2, KEY_F3), /* Tasks List */
KEY(0, 3, KEY_F4), /* Note Pad */
KEY(0, 4, KEY_POWER),
KEY(1, 0, KEY_LEFT),
KEY(1, 0, KEY_F2), /* Contacts */
KEY(2, 0, KEY_F3), /* Tasks List */
KEY(3, 0, KEY_F4), /* Note Pad */
KEY(4, 0, KEY_POWER),
KEY(0, 1, KEY_LEFT),
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
KEY(1, 4, KEY_ENTER),
0,
KEY(2, 1, KEY_UP),
KEY(3, 1, KEY_RIGHT),
KEY(4, 1, KEY_ENTER),
};
static const struct matrix_keymap_data palmte_keymap_data = {
.keymap = palmte_keymap,
.keymap_size = ARRAY_SIZE(palmte_keymap),
};
static struct omap_kp_platform_data palmte_kp_data = {
.rows = 8,
.cols = 8,
.keymap = (int *) palmte_keymap,
.rep = 1,
.keymap_data = &palmte_keymap_data,
.rep = true,
.delay = 12,
};

28
arch/arm/mach-omap1/board-palmtt.c
View File

@ -51,19 +51,18 @@
#define PALMTT_MMC_WP_GPIO 8
#define PALMTT_HDQ_GPIO 11
static int palmtt_keymap[] = {
static const unsigned int palmtt_keymap[] = {
KEY(0, 0, KEY_ESC),
KEY(0, 1, KEY_SPACE),
KEY(0, 2, KEY_LEFTCTRL),
KEY(0, 3, KEY_TAB),
KEY(0, 4, KEY_ENTER),
KEY(1, 0, KEY_LEFT),
KEY(1, 0, KEY_SPACE),
KEY(2, 0, KEY_LEFTCTRL),
KEY(3, 0, KEY_TAB),
KEY(4, 0, KEY_ENTER),
KEY(0, 1, KEY_LEFT),
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
KEY(2, 0, KEY_SLEEP),
KEY(2, 4, KEY_Y),
0
KEY(2, 1, KEY_UP),
KEY(3, 1, KEY_RIGHT),
KEY(0, 2, KEY_SLEEP),
KEY(4, 2, KEY_Y),
};
static struct mtd_partition palmtt_partitions[] = {
@ -136,10 +135,15 @@ static struct resource palmtt_kp_resources[] = {
},
};
static const struct matrix_keymap_data palmtt_keymap_data = {
.keymap = palmtt_keymap,
.keymap_size = ARRAY_SIZE(palmtt_keymap),
};
static struct omap_kp_platform_data palmtt_kp_data = {
.rows = 6,
.cols = 3,
.keymap = palmtt_keymap,
.keymap_data = &palmtt_keymap_data,
};
static struct platform_device palmtt_kp_device = {

31
arch/arm/mach-omap1/board-palmz71.c
View File

@ -62,29 +62,32 @@ omap_palmz71_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
static int palmz71_keymap[] = {
static const unsigned int palmz71_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(0, 1, KEY_F2),
KEY(0, 2, KEY_F3),
KEY(0, 3, KEY_F4),
KEY(0, 4, KEY_POWER),
KEY(1, 0, KEY_LEFT),
KEY(1, 0, KEY_F2),
KEY(2, 0, KEY_F3),
KEY(3, 0, KEY_F4),
KEY(4, 0, KEY_POWER),
KEY(0, 1, KEY_LEFT),
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
KEY(1, 4, KEY_ENTER),
KEY(2, 0, KEY_CAMERA),
0,
KEY(2, 1, KEY_UP),
KEY(3, 1, KEY_RIGHT),
KEY(4, 1, KEY_ENTER),
KEY(0, 2, KEY_CAMERA),
};
static const struct matrix_keymap_data palmz71_keymap_data = {
.keymap = palmz71_keymap,
.keymap_size = ARRAY_SIZE(palmz71_keymap),
};
static struct omap_kp_platform_data palmz71_kp_data = {
.rows = 8,
.cols = 8,
.keymap = palmz71_keymap,
.rep = 1,
.keymap_data = &palmz71_keymap_data,
.rep = true,
.delay = 80,
};

91
arch/arm/mach-omap1/board-perseus2.c
View File

@ -36,36 +36,35 @@
#include <plat/common.h>
#include <plat/board.h>
static int p2_keymap[] = {
KEY(0,0,KEY_UP),
KEY(0,1,KEY_RIGHT),
KEY(0,2,KEY_LEFT),
KEY(0,3,KEY_DOWN),
KEY(0,4,KEY_ENTER),
KEY(1,0,KEY_F10),
KEY(1,1,KEY_SEND),
KEY(1,2,KEY_END),
KEY(1,3,KEY_VOLUMEDOWN),
KEY(1,4,KEY_VOLUMEUP),
KEY(1,5,KEY_RECORD),
KEY(2,0,KEY_F9),
KEY(2,1,KEY_3),
KEY(2,2,KEY_6),
KEY(2,3,KEY_9),
KEY(2,4,KEY_KPDOT),
KEY(3,0,KEY_BACK),
KEY(3,1,KEY_2),
KEY(3,2,KEY_5),
KEY(3,3,KEY_8),
KEY(3,4,KEY_0),
KEY(3,5,KEY_KPSLASH),
KEY(4,0,KEY_HOME),
KEY(4,1,KEY_1),
KEY(4,2,KEY_4),
KEY(4,3,KEY_7),
KEY(4,4,KEY_KPASTERISK),
KEY(4,5,KEY_POWER),
0
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_LEFT),
KEY(3, 0, KEY_DOWN),
KEY(4, 0, KEY_ENTER),
KEY(0, 1, KEY_F10),
KEY(1, 1, KEY_SEND),
KEY(2, 1, KEY_END),
KEY(3, 1, KEY_VOLUMEDOWN),
KEY(4, 1, KEY_VOLUMEUP),
KEY(5, 1, KEY_RECORD),
KEY(0, 2, KEY_F9),
KEY(1, 2, KEY_3),
KEY(2, 2, KEY_6),
KEY(3, 2, KEY_9),
KEY(4, 2, KEY_KPDOT),
KEY(0, 3, KEY_BACK),
KEY(1, 3, KEY_2),
KEY(2, 3, KEY_5),
KEY(3, 3, KEY_8),
KEY(4, 3, KEY_0),
KEY(5, 3, KEY_KPSLASH),
KEY(0, 4, KEY_HOME),
KEY(1, 4, KEY_1),
KEY(2, 4, KEY_4),
KEY(3, 4, KEY_7),
KEY(4, 4, KEY_KPASTERISK),
KEY(5, 4, KEY_POWER),
};
static struct smc91x_platdata smc91x_info = {
@ -211,13 +210,17 @@ static struct resource kp_resources[] = {
},
};
static const struct matrix_keymap_data p2_keymap_data = {
.keymap = p2_keymap,
.keymap_size = ARRAY_SIZE(p2_keymap),
};
static struct omap_kp_platform_data kp_data = {
.rows = 8,
.cols = 8,
.keymap = p2_keymap,
.keymapsize = ARRAY_SIZE(p2_keymap),
.keymap_data = &p2_keymap_data,
.delay = 4,
.dbounce = 1,
.dbounce = true,
};
static struct platform_device kp_device = {
@ -251,8 +254,19 @@ static struct omap_board_config_kernel perseus2_config[] __initdata = {
{ OMAP_TAG_LCD, &perseus2_lcd_config },
};
static void __init perseus2_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
static void __init omap_perseus2_init(void)
{
perseus2_init_smc91x();
if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
BUG();
gpio_direction_input(P2_NAND_RB_GPIO_PIN);
@ -280,21 +294,10 @@ static void __init omap_perseus2_init(void)
omap_register_i2c_bus(1, 100, NULL, 0);
}
static void __init perseus2_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
static void __init omap_perseus2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
perseus2_init_smc91x();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {

58
arch/arm/mach-omap1/board-sx1.c
View File

@ -164,36 +164,35 @@ EXPORT_SYMBOL(sx1_setusbpower);
/*----------- Keypad -------------------------*/
static int sx1_keymap[] = {
KEY(5, 3, GROUP_0 | 117), /* camera Qt::Key_F17 */
KEY(0, 4, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
KEY(1, 4, GROUP_2 | 114), /* voice memo */
KEY(2, 4, GROUP_3 | 114), /* voice memo */
static const unsigned int sx1_keymap[] = {
KEY(3, 5, GROUP_0 | 117), /* camera Qt::Key_F17 */
KEY(4, 0, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
KEY(4, 1, GROUP_2 | 114), /* voice memo */
KEY(4, 2, GROUP_3 | 114), /* voice memo */
KEY(0, 0, GROUP_1 | KEY_F12), /* red button Qt::Key_Hangup */
KEY(4, 3, GROUP_1 | KEY_LEFT),
KEY(2, 3, GROUP_1 | KEY_DOWN),
KEY(1, 3, GROUP_1 | KEY_RIGHT),
KEY(0, 3, GROUP_1 | KEY_UP),
KEY(3, 4, GROUP_1 | KEY_LEFT),
KEY(3, 2, GROUP_1 | KEY_DOWN),
KEY(3, 1, GROUP_1 | KEY_RIGHT),
KEY(3, 0, GROUP_1 | KEY_UP),
KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */
KEY(5, 0, GROUP_1 | KEY_1),
KEY(4, 0, GROUP_1 | KEY_2),
KEY(3, 0, GROUP_1 | KEY_3),
KEY(3, 4, GROUP_1 | KEY_4),
KEY(0, 5, GROUP_1 | KEY_1),
KEY(0, 4, GROUP_1 | KEY_2),
KEY(0, 3, GROUP_1 | KEY_3),
KEY(4, 3, GROUP_1 | KEY_4),
KEY(4, 4, GROUP_1 | KEY_5),
KEY(5, 4, GROUP_1 | KEY_KPASTERISK),/* "*" */
KEY(4, 1, GROUP_1 | KEY_6),
KEY(5, 1, GROUP_1 | KEY_7),
KEY(3, 1, GROUP_1 | KEY_8),
KEY(3, 2, GROUP_1 | KEY_9),
KEY(5, 2, GROUP_1 | KEY_0),
KEY(4, 2, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
KEY(0, 1, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */
KEY(1, 2, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */
KEY(4, 5, GROUP_1 | KEY_KPASTERISK),/* "*" */
KEY(1, 4, GROUP_1 | KEY_6),
KEY(1, 5, GROUP_1 | KEY_7),
KEY(1, 3, GROUP_1 | KEY_8),
KEY(2, 3, GROUP_1 | KEY_9),
KEY(2, 5, GROUP_1 | KEY_0),
KEY(2, 4, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
KEY(1, 0, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */
KEY(2, 1, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */
KEY(2, 2, GROUP_1 | KEY_F8), /* right soft Qt::Key_Back */
KEY(2, 1, GROUP_1 | KEY_LEFTSHIFT), /* shift */
KEY(1, 2, GROUP_1 | KEY_LEFTSHIFT), /* shift */
KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */
KEY(0, 2, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */
0
KEY(2, 0, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */
};
static struct resource sx1_kp_resources[] = {
@ -204,11 +203,15 @@ static struct resource sx1_kp_resources[] = {
},
};
static const struct matrix_keymap_data sx1_keymap_data = {
.keymap = sx1_keymap,
.keymap_size = ARRAY_SIZE(sx1_keymap),
};
static struct omap_kp_platform_data sx1_kp_data = {
.rows = 6,
.cols = 6,
.keymap = sx1_keymap,
.keymapsize = ARRAY_SIZE(sx1_keymap),
.keymap_data = &sx1_keymap_data,
.delay = 80,
};
@ -409,7 +412,6 @@ static void __init omap_sx1_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
/*----------------------------------------*/

7
arch/arm/mach-omap1/board-voiceblue.c
View File

@ -83,6 +83,9 @@ static struct platform_device serial_device = {
static int __init ext_uart_init(void)
{
if (!machine_is_voiceblue())
return -ENODEV;
return platform_device_register(&serial_device);
}
arch_initcall(ext_uart_init);
@ -158,7 +161,6 @@ static void __init voiceblue_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
static void __init voiceblue_init(void)
@ -236,6 +238,9 @@ static struct notifier_block panic_block = {
static int __init voiceblue_setup(void)
{
if (!machine_is_voiceblue())
return -ENODEV;
/* Setup panic notifier */
atomic_notifier_chain_register(&panic_notifier_list, &panic_block);

27
arch/arm/mach-omap1/clock_data.c
View File

@ -143,7 +143,7 @@ static struct arm_idlect1_clk armper_ck = {
* activation. [ GPIO code for 1510 ]
*/
static struct clk arm_gpio_ck = {
.name = "arm_gpio_ck",
.name = "ick",
.ops = &clkops_generic,
.parent = &ck_dpll1,
.flags = ENABLE_ON_INIT,
@ -684,7 +684,7 @@ static struct omap_clk omap_clks[] = {
CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX),
CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
CLK("omap_gpio.0", "ick", &arm_gpio_ck, CK_1510 | CK_310),
CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
@ -736,9 +736,9 @@ static struct omap_clk omap_clks[] = {
CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX),
/* Virtual clocks */
CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX),
CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
CLK("omap_i2c.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX),
CLK("omap_i2c.1", "ick", &i2c_ick, CK_16XX),
CLK("omap_i2c.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX),
CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX),
CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX),
CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX),
@ -823,12 +823,10 @@ int __init omap1_clk_init(void)
crystal_type = info->system_clock_type;
}
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
ck_ref.rate = 13000000;
#elif defined(CONFIG_ARCH_OMAP16XX)
if (crystal_type == 2)
if (cpu_is_omap7xx())
ck_ref.rate = 13000000;
if (cpu_is_omap16xx() && crystal_type == 2)
ck_ref.rate = 19200000;
#endif
pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
"0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
@ -883,10 +881,11 @@ int __init omap1_clk_init(void)
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
#endif
if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
OMAP7XX_PCC_UPLD_CTRL);
}
/* Amstrad Delta wants BCLK high when inactive */
if (machine_is_ams_delta())

4
arch/arm/mach-omap1/devices.c
View File

@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <mach/camera.h>
#include <mach/hardware.h>
#include <asm/mach/map.h>
@ -287,6 +288,9 @@ static inline void omap_init_audio(void) {}
*/
static int __init omap1_init_devices(void)
{
if (!cpu_class_is_omap1())
return -ENODEV;
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/

390
arch/arm/mach-omap1/dma.c Normal file
View File

@ -0,0 +1,390 @@
/*
* OMAP1/OMAP7xx - specific DMA driver
*
* Copyright (C) 2003 - 2008 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
* DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
* Graphics DMA and LCD DMA graphics tranformations
* by Imre Deak <imre.deak@nokia.com>
* OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
* Converted DMA library into platform driver
* - G, Manjunath Kondaiah <manjugk@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat/irqs.h>
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
#define OMAP1_DMA_STRIDE 0x40
static u32 errata;
static u32 enable_1510_mode;
static u8 dma_stride;
static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
static u16 reg_map[] = {
[GCR] = 0x400,
[GSCR] = 0x404,
[GRST1] = 0x408,
[HW_ID] = 0x442,
[PCH2_ID] = 0x444,
[PCH0_ID] = 0x446,
[PCH1_ID] = 0x448,
[PCHG_ID] = 0x44a,
[PCHD_ID] = 0x44c,
[CAPS_0] = 0x44e,
[CAPS_1] = 0x452,
[CAPS_2] = 0x456,
[CAPS_3] = 0x458,
[CAPS_4] = 0x45a,
[PCH2_SR] = 0x460,
[PCH0_SR] = 0x480,
[PCH1_SR] = 0x482,
[PCHD_SR] = 0x4c0,
/* Common Registers */
[CSDP] = 0x00,
[CCR] = 0x02,
[CICR] = 0x04,
[CSR] = 0x06,
[CEN] = 0x10,
[CFN] = 0x12,
[CSFI] = 0x14,
[CSEI] = 0x16,
[CPC] = 0x18, /* 15xx only */
[CSAC] = 0x18,
[CDAC] = 0x1a,
[CDEI] = 0x1c,
[CDFI] = 0x1e,
[CLNK_CTRL] = 0x28,
/* Channel specific register offsets */
[CSSA] = 0x08,
[CDSA] = 0x0c,
[COLOR] = 0x20,
[CCR2] = 0x24,
[LCH_CTRL] = 0x2a,
};
static struct resource res[] __initdata = {
[0] = {
.start = OMAP1_DMA_BASE,
.end = OMAP1_DMA_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "0",
.start = INT_DMA_CH0_6,
.flags = IORESOURCE_IRQ,
},
[2] = {
.name = "1",
.start = INT_DMA_CH1_7,
.flags = IORESOURCE_IRQ,
},
[3] = {
.name = "2",
.start = INT_DMA_CH2_8,
.flags = IORESOURCE_IRQ,
},
[4] = {
.name = "3",
.start = INT_DMA_CH3,
.flags = IORESOURCE_IRQ,
},
[5] = {
.name = "4",
.start = INT_DMA_CH4,
.flags = IORESOURCE_IRQ,
},
[6] = {
.name = "5",
.start = INT_DMA_CH5,
.flags = IORESOURCE_IRQ,
},
/* Handled in lcd_dma.c */
[7] = {
.name = "6",
.start = INT_1610_DMA_CH6,
.flags = IORESOURCE_IRQ,
},
/* irq's for omap16xx and omap7xx */
[8] = {
.name = "7",
.start = INT_1610_DMA_CH7,
.flags = IORESOURCE_IRQ,
},
[9] = {
.name = "8",
.start = INT_1610_DMA_CH8,
.flags = IORESOURCE_IRQ,
},
[10] = {
.name = "9",
.start = INT_1610_DMA_CH9,
.flags = IORESOURCE_IRQ,
},
[11] = {
.name = "10",
.start = INT_1610_DMA_CH10,
.flags = IORESOURCE_IRQ,
},
[12] = {
.name = "11",
.start = INT_1610_DMA_CH11,
.flags = IORESOURCE_IRQ,
},
[13] = {
.name = "12",
.start = INT_1610_DMA_CH12,
.flags = IORESOURCE_IRQ,
},
[14] = {
.name = "13",
.start = INT_1610_DMA_CH13,
.flags = IORESOURCE_IRQ,
},
[15] = {
.name = "14",
.start = INT_1610_DMA_CH14,
.flags = IORESOURCE_IRQ,
},
[16] = {
.name = "15",
.start = INT_1610_DMA_CH15,
.flags = IORESOURCE_IRQ,
},
[17] = {
.name = "16",
.start = INT_DMA_LCD,
.flags = IORESOURCE_IRQ,
},
};
static void __iomem *dma_base;
static inline void dma_write(u32 val, int reg, int lch)
{
u8 stride;
u32 offset;
stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
offset = reg_map[reg] + (stride * lch);
__raw_writew(val, dma_base + offset);
if ((reg > CLNK_CTRL && reg < CCEN) ||
(reg > PCHD_ID && reg < CAPS_2)) {
u32 offset2 = reg_map[reg] + 2 + (stride * lch);
__raw_writew(val >> 16, dma_base + offset2);
}
}
static inline u32 dma_read(int reg, int lch)
{
u8 stride;
u32 offset, val;
stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
offset = reg_map[reg] + (stride * lch);
val = __raw_readw(dma_base + offset);
if ((reg > CLNK_CTRL && reg < CCEN) ||
(reg > PCHD_ID && reg < CAPS_2)) {
u16 upper;
u32 offset2 = reg_map[reg] + 2 + (stride * lch);
upper = __raw_readw(dma_base + offset2);
val |= (upper << 16);
}
return val;
}
static void omap1_clear_lch_regs(int lch)
{
int i = dma_common_ch_start;
for (; i <= dma_common_ch_end; i += 1)
dma_write(0, i, lch);
}
static void omap1_clear_dma(int lch)
{
u32 l;
l = dma_read(CCR, lch);
l &= ~OMAP_DMA_CCR_EN;
dma_write(l, CCR, lch);
/* Clear pending interrupts */
l = dma_read(CSR, lch);
}
static void omap1_show_dma_caps(void)
{
if (enable_1510_mode) {
printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
} else {
u16 w;
printk(KERN_INFO "OMAP DMA hardware version %d\n",
dma_read(HW_ID, 0));
printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
dma_read(CAPS_0, 0), dma_read(CAPS_1, 0),
dma_read(CAPS_2, 0), dma_read(CAPS_3, 0),
dma_read(CAPS_4, 0));
/* Disable OMAP 3.0/3.1 compatibility mode. */
w = dma_read(GSCR, 0);
w |= 1 << 3;
dma_write(w, GSCR, 0);
}
return;
}
static u32 configure_dma_errata(void)
{
/*
* Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
if (!cpu_is_omap15xx())
SET_DMA_ERRATA(DMA_ERRATA_3_3);
return errata;
}
static int __init omap1_system_dma_init(void)
{
struct omap_system_dma_plat_info *p;
struct omap_dma_dev_attr *d;
struct platform_device *pdev;
int ret;
pdev = platform_device_alloc("omap_dma_system", 0);
if (!pdev) {
pr_err("%s: Unable to device alloc for dma\n",
__func__);
return -ENOMEM;
}
dma_base = ioremap(res[0].start, resource_size(&res[0]));
if (!dma_base) {
pr_err("%s: Unable to ioremap\n", __func__);
return -ENODEV;
}
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
goto exit_device_del;
}
p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
if (!p) {
dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
__func__, pdev->name);
ret = -ENOMEM;
goto exit_device_put;
}
d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
if (!d) {
dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n",
__func__, pdev->name);
ret = -ENOMEM;
goto exit_release_p;
}
d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
/* Valid attributes for omap1 plus processors */
if (cpu_is_omap15xx())
d->dev_caps = ENABLE_1510_MODE;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
d->dev_caps |= SRC_PORT;
d->dev_caps |= DST_PORT;
d->dev_caps |= SRC_INDEX;
d->dev_caps |= DST_INDEX;
d->dev_caps |= IS_BURST_ONLY4;
d->dev_caps |= CLEAR_CSR_ON_READ;
d->dev_caps |= IS_WORD_16;
d->chan = kzalloc(sizeof(struct omap_dma_lch) *
(d->lch_count), GFP_KERNEL);
if (!d->chan) {
dev_err(&pdev->dev, "%s: Memory allocation failed"
"for d->chan!!!\n", __func__);
goto exit_release_d;
}
if (cpu_is_omap15xx())
d->chan_count = 9;
else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
if (!(d->dev_caps & ENABLE_1510_MODE))
d->chan_count = 16;
else
d->chan_count = 9;
}
p->dma_attr = d;
p->show_dma_caps = omap1_show_dma_caps;
p->clear_lch_regs = omap1_clear_lch_regs;
p->clear_dma = omap1_clear_dma;
p->dma_write = dma_write;
p->dma_read = dma_read;
p->disable_irq_lch = NULL;
p->errata = configure_dma_errata();
ret = platform_device_add_data(pdev, p, sizeof(*p));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
goto exit_release_chan;
}
ret = platform_device_add(pdev);
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
goto exit_release_chan;
}
dma_stride = OMAP1_DMA_STRIDE;
dma_common_ch_start = CPC;
dma_common_ch_end = COLOR;
return ret;
exit_release_chan:
kfree(d->chan);
exit_release_d:
kfree(d);
exit_release_p:
kfree(p);
exit_device_put:
platform_device_put(pdev);
exit_device_del:
platform_device_del(pdev);
return ret;
}
arch_initcall(omap1_system_dma_init);

1
arch/arm/mach-omap1/flash.c
View File

@ -11,6 +11,7 @@
#include <plat/io.h>
#include <plat/tc.h>
#include <plat/flash.h>
void omap1_set_vpp(struct map_info *map, int enable)
{

10
arch/arm/mach-omap1/fpga.c
View File

@ -143,7 +143,7 @@ static struct irq_chip omap_fpga_irq = {
*/
void omap1510_fpga_init_irq(void)
{
int i;
int i, res;
__raw_writeb(0, OMAP1510_FPGA_IMR_LO);
__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
@ -177,10 +177,12 @@ void omap1510_fpga_init_irq(void)
* NOTE: For general GPIO/MPUIO access and interrupts, please see
* gpio.[ch]
*/
gpio_request(13, "FPGA irq");
res = gpio_request(13, "FPGA irq");
if (res) {
pr_err("%s failed to get gpio\n", __func__);
return;
}
gpio_direction_input(13);
set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
}
EXPORT_SYMBOL(omap1510_fpga_init_irq);

99
arch/arm/mach-omap1/gpio15xx.c Normal file
View File

@ -0,0 +1,99 @@
/*
* OMAP15xx specific gpio init
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
*
* Author:
* Charulatha V <charu@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000
/* gpio1 */
static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
{
.start = OMAP1_MPUIO_VBASE,
.end = OMAP1_MPUIO_VBASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_MPUIO,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.bank_type = METHOD_MPUIO,
.bank_width = 16,
.bank_stride = 1,
};
static struct __initdata platform_device omap15xx_mpu_gpio = {
.name = "omap_gpio",
.id = 0,
.dev = {
.platform_data = &omap15xx_mpu_gpio_config,
},
.num_resources = ARRAY_SIZE(omap15xx_mpu_gpio_resources),
.resource = omap15xx_mpu_gpio_resources,
};
/* gpio2 */
static struct __initdata resource omap15xx_gpio_resources[] = {
{
.start = OMAP1510_GPIO_BASE,
.end = OMAP1510_GPIO_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_GPIO_BANK1,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_type = METHOD_GPIO_1510,
.bank_width = 16,
};
static struct __initdata platform_device omap15xx_gpio = {
.name = "omap_gpio",
.id = 1,
.dev = {
.platform_data = &omap15xx_gpio_config,
},
.num_resources = ARRAY_SIZE(omap15xx_gpio_resources),
.resource = omap15xx_gpio_resources,
};
/*
* omap15xx_gpio_init needs to be done before
* machine_init functions access gpio APIs.
* Hence omap15xx_gpio_init is a postcore_initcall.
*/
static int __init omap15xx_gpio_init(void)
{
if (!cpu_is_omap15xx())
return -EINVAL;
platform_device_register(&omap15xx_mpu_gpio);
platform_device_register(&omap15xx_gpio);
gpio_bank_count = 2;
return 0;
}
postcore_initcall(omap15xx_gpio_init);

200
arch/arm/mach-omap1/gpio16xx.c Normal file
View File

@ -0,0 +1,200 @@
/*
* OMAP16xx specific gpio init
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
*
* Author:
* Charulatha V <charu@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00
#define OMAP1610_GPIO3_BASE 0xfffbb400
#define OMAP1610_GPIO4_BASE 0xfffbbc00
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
/* mpu gpio */
static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
{
.start = OMAP1_MPUIO_VBASE,
.end = OMAP1_MPUIO_VBASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_MPUIO,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.bank_type = METHOD_MPUIO,
.bank_width = 16,
.bank_stride = 1,
};
static struct __initdata platform_device omap16xx_mpu_gpio = {
.name = "omap_gpio",
.id = 0,
.dev = {
.platform_data = &omap16xx_mpu_gpio_config,
},
.num_resources = ARRAY_SIZE(omap16xx_mpu_gpio_resources),
.resource = omap16xx_mpu_gpio_resources,
};
/* gpio1 */
static struct __initdata resource omap16xx_gpio1_resources[] = {
{
.start = OMAP1610_GPIO1_BASE,
.end = OMAP1610_GPIO1_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_GPIO_BANK1,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
};
static struct __initdata platform_device omap16xx_gpio1 = {
.name = "omap_gpio",
.id = 1,
.dev = {
.platform_data = &omap16xx_gpio1_config,
},
.num_resources = ARRAY_SIZE(omap16xx_gpio1_resources),
.resource = omap16xx_gpio1_resources,
};
/* gpio2 */
static struct __initdata resource omap16xx_gpio2_resources[] = {
{
.start = OMAP1610_GPIO2_BASE,
.end = OMAP1610_GPIO2_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_1610_GPIO_BANK2,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
.virtual_irq_start = IH_GPIO_BASE + 16,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
};
static struct __initdata platform_device omap16xx_gpio2 = {
.name = "omap_gpio",
.id = 2,
.dev = {
.platform_data = &omap16xx_gpio2_config,
},
.num_resources = ARRAY_SIZE(omap16xx_gpio2_resources),
.resource = omap16xx_gpio2_resources,
};
/* gpio3 */
static struct __initdata resource omap16xx_gpio3_resources[] = {
{
.start = OMAP1610_GPIO3_BASE,
.end = OMAP1610_GPIO3_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_1610_GPIO_BANK3,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
.virtual_irq_start = IH_GPIO_BASE + 32,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
};
static struct __initdata platform_device omap16xx_gpio3 = {
.name = "omap_gpio",
.id = 3,
.dev = {
.platform_data = &omap16xx_gpio3_config,
},
.num_resources = ARRAY_SIZE(omap16xx_gpio3_resources),
.resource = omap16xx_gpio3_resources,
};
/* gpio4 */
static struct __initdata resource omap16xx_gpio4_resources[] = {
{
.start = OMAP1610_GPIO4_BASE,
.end = OMAP1610_GPIO4_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_1610_GPIO_BANK4,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
.virtual_irq_start = IH_GPIO_BASE + 48,
.bank_type = METHOD_GPIO_1610,
.bank_width = 16,
};
static struct __initdata platform_device omap16xx_gpio4 = {
.name = "omap_gpio",
.id = 4,
.dev = {
.platform_data = &omap16xx_gpio4_config,
},
.num_resources = ARRAY_SIZE(omap16xx_gpio4_resources),
.resource = omap16xx_gpio4_resources,
};
static struct __initdata platform_device * omap16xx_gpio_dev[] = {
&omap16xx_mpu_gpio,
&omap16xx_gpio1,
&omap16xx_gpio2,
&omap16xx_gpio3,
&omap16xx_gpio4,
};
/*
* omap16xx_gpio_init needs to be done before
* machine_init functions access gpio APIs.
* Hence omap16xx_gpio_init is a postcore_initcall.
*/
static int __init omap16xx_gpio_init(void)
{
int i;
if (!cpu_is_omap16xx())
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
platform_device_register(omap16xx_gpio_dev[i]);
gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev);
return 0;
}
postcore_initcall(omap16xx_gpio_init);

262
arch/arm/mach-omap1/gpio7xx.c Normal file
View File

@ -0,0 +1,262 @@
/*
* OMAP7xx specific gpio init
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
*
* Author:
* Charulatha V <charu@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800
#define OMAP7XX_GPIO3_BASE 0xfffbd000
#define OMAP7XX_GPIO4_BASE 0xfffbd800
#define OMAP7XX_GPIO5_BASE 0xfffbe000
#define OMAP7XX_GPIO6_BASE 0xfffbe800
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
/* mpu gpio */
static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
{
.start = OMAP1_MPUIO_VBASE,
.end = OMAP1_MPUIO_VBASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_7XX_MPUIO,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
.virtual_irq_start = IH_MPUIO_BASE,
.bank_type = METHOD_MPUIO,
.bank_width = 32,
.bank_stride = 2,
};
static struct __initdata platform_device omap7xx_mpu_gpio = {
.name = "omap_gpio",
.id = 0,
.dev = {
.platform_data = &omap7xx_mpu_gpio_config,
},
.num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources),
.resource = omap7xx_mpu_gpio_resources,
};
/* gpio1 */
static struct __initdata resource omap7xx_gpio1_resources[] = {
{
.start = OMAP7XX_GPIO1_BASE,
.end = OMAP7XX_GPIO1_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_7XX_GPIO_BANK1,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
.virtual_irq_start = IH_GPIO_BASE,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
};
static struct __initdata platform_device omap7xx_gpio1 = {
.name = "omap_gpio",
.id = 1,
.dev = {
.platform_data = &omap7xx_gpio1_config,
},
.num_resources = ARRAY_SIZE(omap7xx_gpio1_resources),
.resource = omap7xx_gpio1_resources,
};
/* gpio2 */
static struct __initdata resource omap7xx_gpio2_resources[] = {
{
.start = OMAP7XX_GPIO2_BASE,
.end = OMAP7XX_GPIO2_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_7XX_GPIO_BANK2,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
.virtual_irq_start = IH_GPIO_BASE + 32,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
};
static struct __initdata platform_device omap7xx_gpio2 = {
.name = "omap_gpio",
.id = 2,
.dev = {
.platform_data = &omap7xx_gpio2_config,
},
.num_resources = ARRAY_SIZE(omap7xx_gpio2_resources),
.resource = omap7xx_gpio2_resources,
};
/* gpio3 */
static struct __initdata resource omap7xx_gpio3_resources[] = {
{
.start = OMAP7XX_GPIO3_BASE,
.end = OMAP7XX_GPIO3_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_7XX_GPIO_BANK3,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
.virtual_irq_start = IH_GPIO_BASE + 64,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
};
static struct __initdata platform_device omap7xx_gpio3 = {
.name = "omap_gpio",
.id = 3,
.dev = {
.platform_data = &omap7xx_gpio3_config,
},
.num_resources = ARRAY_SIZE(omap7xx_gpio3_resources),
.resource = omap7xx_gpio3_resources,
};
/* gpio4 */
static struct __initdata resource omap7xx_gpio4_resources[] = {
{
.start = OMAP7XX_GPIO4_BASE,
.end = OMAP7XX_GPIO4_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_7XX_GPIO_BANK4,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
.virtual_irq_start = IH_GPIO_BASE + 96,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
};
static struct __initdata platform_device omap7xx_gpio4 = {
.name = "omap_gpio",
.id = 4,
.dev = {
.platform_data = &omap7xx_gpio4_config,
},
.num_resources = ARRAY_SIZE(omap7xx_gpio4_resources),
.resource = omap7xx_gpio4_resources,
};
/* gpio5 */
static struct __initdata resource omap7xx_gpio5_resources[] = {
{
.start = OMAP7XX_GPIO5_BASE,
.end = OMAP7XX_GPIO5_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_7XX_GPIO_BANK5,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
.virtual_irq_start = IH_GPIO_BASE + 128,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
};
static struct __initdata platform_device omap7xx_gpio5 = {
.name = "omap_gpio",
.id = 5,
.dev = {
.platform_data = &omap7xx_gpio5_config,
},
.num_resources = ARRAY_SIZE(omap7xx_gpio5_resources),
.resource = omap7xx_gpio5_resources,
};
/* gpio6 */
static struct __initdata resource omap7xx_gpio6_resources[] = {
{
.start = OMAP7XX_GPIO6_BASE,
.end = OMAP7XX_GPIO6_BASE + SZ_2K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_7XX_GPIO_BANK6,
.flags = IORESOURCE_IRQ,
},
};
static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
.virtual_irq_start = IH_GPIO_BASE + 160,
.bank_type = METHOD_GPIO_7XX,
.bank_width = 32,
};
static struct __initdata platform_device omap7xx_gpio6 = {
.name = "omap_gpio",
.id = 6,
.dev = {
.platform_data = &omap7xx_gpio6_config,
},
.num_resources = ARRAY_SIZE(omap7xx_gpio6_resources),
.resource = omap7xx_gpio6_resources,
};
static struct __initdata platform_device * omap7xx_gpio_dev[] = {
&omap7xx_mpu_gpio,
&omap7xx_gpio1,
&omap7xx_gpio2,
&omap7xx_gpio3,
&omap7xx_gpio4,
&omap7xx_gpio5,
&omap7xx_gpio6,
};
/*
* omap7xx_gpio_init needs to be done before
* machine_init functions access gpio APIs.
* Hence omap7xx_gpio_init is a postcore_initcall.
*/
static int __init omap7xx_gpio_init(void)
{
int i;
if (!cpu_is_omap7xx())
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
platform_device_register(omap7xx_gpio_dev[i]);
gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev);
return 0;
}
postcore_initcall(omap7xx_gpio_init);

27
arch/arm/mach-omap1/include/mach/entry-macro.S
View File

@ -14,18 +14,17 @@
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
#define INT_IH2_IRQ INT_7XX_IH2_IRQ
#elif defined(CONFIG_ARCH_OMAP15XX)
#define INT_IH2_IRQ INT_1510_IH2_IRQ
#elif defined(CONFIG_ARCH_OMAP16XX)
#define INT_IH2_IRQ INT_1610_IH2_IRQ
#else
#warning "IH2 IRQ defaulted"
#define INT_IH2_IRQ INT_1510_IH2_IRQ
/*
* We use __glue to avoid errors with multiple definitions of
* .globl omap_irq_flags as it's included from entry-armv.S but not
* from entry-common.S.
*/
#ifdef __glue
.pushsection .data
.globl omap_irq_flags
omap_irq_flags:
.word 0
.popsection
#endif
.macro disable_fiq
@ -47,9 +46,11 @@
beq 1510f
ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
ldr \tmp, =omap_irq_flags @ irq flags address
ldr \tmp, [\tmp, #0] @ irq flags value
cmp \irqnr, #0
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
cmpeq \irqnr, #INT_IH2_IRQ
cmpeq \irqnr, \tmp
ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
addeqs \irqnr, \irqnr, #32

39
arch/arm/mach-omap1/io.c
View File

@ -142,3 +142,42 @@ void __init omap1_init_common_hw(void)
omap1_mux_init();
}
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
u8 omap_readb(u32 pa)
{
return __raw_readb(OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readb);
u16 omap_readw(u32 pa)
{
return __raw_readw(OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readw);
u32 omap_readl(u32 pa)
{
return __raw_readl(OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_readl);
void omap_writeb(u8 v, u32 pa)
{
__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writeb);
void omap_writew(u16 v, u32 pa)
{
__raw_writew(v, OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writew);
void omap_writel(u32 v, u32 pa)
{
__raw_writel(v, OMAP1_IO_ADDRESS(pa));
}
EXPORT_SYMBOL(omap_writel);

5
arch/arm/mach-omap1/irq.c
View File

@ -176,26 +176,31 @@ static struct irq_chip omap_irq_chip = {
void __init omap_init_irq(void)
{
extern unsigned int omap_irq_flags;
int i, j;
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
if (cpu_is_omap7xx()) {
omap_irq_flags = INT_7XX_IH2_IRQ;
irq_banks = omap7xx_irq_banks;
irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
}
#endif
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap_irq_flags = INT_1510_IH2_IRQ;
irq_banks = omap1510_irq_banks;
irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
}
if (cpu_is_omap310()) {
omap_irq_flags = INT_1510_IH2_IRQ;
irq_banks = omap310_irq_banks;
irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
}
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
if (cpu_is_omap16xx()) {
omap_irq_flags = INT_1510_IH2_IRQ;
irq_banks = omap1610_irq_banks;
irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
}

3
arch/arm/mach-omap1/lcd_dma.c
View File

@ -424,6 +424,9 @@ static int __init omap_init_lcd_dma(void)
{
int r;
if (!cpu_class_is_omap1())
return -ENODEV;
if (cpu_is_omap16xx()) {
u16 w;

3
arch/arm/mach-omap1/leds.c
View File

@ -17,6 +17,9 @@
static int __init
omap_leds_init(void)
{
if (!cpu_class_is_omap1())
return -ENODEV;
if (machine_is_omap_innovator())
leds_event = innovator_leds_event;

5
arch/arm/mach-omap1/mailbox.c
View File

@ -133,19 +133,18 @@ static struct omap_mbox1_priv omap1_mbox_dsp_priv = {
},
};
struct omap_mbox mbox_dsp_info = {
static struct omap_mbox mbox_dsp_info = {
.name = "dsp",
.ops = &omap1_mbox_ops,
.priv = &omap1_mbox_dsp_priv,
};
struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
static int __devinit omap1_mbox_probe(struct platform_device *pdev)
{
struct resource *mem;
int ret;
int i;
struct omap_mbox **list;
list = omap1_mboxes;

5
arch/arm/mach-omap1/mcbsp.c
View File

@ -174,8 +174,11 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
#define OMAP16XX_MCBSP_REG_NUM 0
#endif
int __init omap1_mcbsp_init(void)
static int __init omap1_mcbsp_init(void)
{
if (!cpu_class_is_omap1())
return -ENODEV;
if (cpu_is_omap7xx()) {
omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);

2
arch/arm/mach-omap1/mux.c
View File

@ -343,7 +343,7 @@ MUX_CFG("Y14_1610_CCP_DATAM", 9, 21, 6, 2, 3, 1, 2, 0, 0)
#define OMAP1XXX_PINS_SZ 0
#endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
{
static DEFINE_SPINLOCK(mux_spin_lock);
unsigned long flags;

3
arch/arm/mach-omap1/pm.c
View File

@ -661,6 +661,9 @@ static int __init omap_pm_init(void)
int error;
#endif
if (!cpu_class_is_omap1())
return -ENODEV;
printk("Power Management for TI OMAP.\n");
/*

4
arch/arm/mach-omap1/pm_bus.c
View File

@ -48,7 +48,6 @@ static int omap1_pm_runtime_suspend(struct device *dev)
static int omap1_pm_runtime_resume(struct device *dev)
{
int ret = 0;
struct clk *iclk, *fclk;
dev_dbg(dev, "%s\n", __func__);
@ -73,6 +72,9 @@ static int __init omap1_pm_runtime_init(void)
const struct dev_pm_ops *pm;
struct dev_pm_ops *omap_pm;
if (!cpu_class_is_omap1())
return -ENODEV;
pm = platform_bus_get_pm_ops();
if (!pm) {
pr_err("%s: unable to get dev_pm_ops from platform_bus\n",

11
arch/arm/mach-omap1/serial.c
View File

@ -27,6 +27,8 @@
#include <mach/gpio.h>
#include <plat/fpga.h>
#include "pm.h"
static struct clk * uart1_ck;
static struct clk * uart2_ck;
static struct clk * uart3_ck;
@ -52,9 +54,11 @@ static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
*/
static void __init omap_serial_reset(struct plat_serial8250_port *p)
{
omap_serial_outp(p, UART_OMAP_MDR1, 0x07); /* disable UART */
omap_serial_outp(p, UART_OMAP_MDR1,
UART_OMAP_MDR1_DISABLE); /* disable UART */
omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */
omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */
omap_serial_outp(p, UART_OMAP_MDR1,
UART_OMAP_MDR1_16X_MODE); /* enable UART */
if (!cpu_is_omap15xx()) {
omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
@ -254,6 +258,9 @@ late_initcall(omap_serial_wakeup_init);
static int __init omap_init(void)
{
if (!cpu_class_is_omap1())
return -ENODEV;
return platform_device_register(&serial_device);
}
arch_initcall(omap_init);

1
arch/arm/mach-omap1/time.c
View File

@ -52,6 +52,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <plat/common.h>
#define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE
#define OMAP_MPU_TIMER_OFFSET 0x100

34
arch/arm/mach-omap2/Kconfig
View File

@ -15,7 +15,7 @@ config ARCH_OMAP2PLUS_TYPICAL
select SERIAL_OMAP_CONSOLE
select I2C
select I2C_OMAP
select MFD
select MFD_SUPPORT
select MENELAUS if ARCH_OMAP2
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
@ -35,6 +35,8 @@ config ARCH_OMAP3
select CPU_V7
select USB_ARCH_HAS_EHCI
select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4
select ARCH_HAS_OPP
select PM_OPP if PM
config ARCH_OMAP4
bool "TI OMAP4"
@ -44,6 +46,8 @@ config ARCH_OMAP4
select ARM_GIC
select PL310_ERRATA_588369
select ARM_ERRATA_720789
select ARCH_HAS_OPP
select PM_OPP if PM
comment "OMAP Core Type"
depends on ARCH_OMAP2
@ -85,6 +89,12 @@ config OMAP_PACKAGE_CUS
config OMAP_PACKAGE_CBP
bool
config OMAP_PACKAGE_CBL
bool
config OMAP_PACKAGE_CBS
bool
comment "OMAP Board Type"
depends on ARCH_OMAP2PLUS
@ -128,7 +138,6 @@ config MACH_DEVKIT8000
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CUS
select OMAP_MUX
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
@ -174,11 +183,17 @@ config MACH_OMAP3517EVM
default y
select OMAP_PACKAGE_CBB
config MACH_CRANEBOARD
bool "AM3517/05 CRANE board"
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE
config MACH_OMAP3_TOUCHBOOK
bool "OMAP3 Touch Book"
@ -210,6 +225,12 @@ config MACH_NOKIA_N8X0
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
config MACH_NOKIA_RM680
bool "Nokia RM-680 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3
@ -224,6 +245,7 @@ config MACH_OMAP_ZOOM2
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@ -233,20 +255,19 @@ config MACH_OMAP_ZOOM3
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE
config MACH_CM_T35
bool "CompuLab CM-T35 module"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CUS
select OMAP_MUX
config MACH_CM_T3517
bool "CompuLab CM-T3517 module"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select OMAP_MUX
config MACH_IGEP0020
bool "IGEP v2 board"
@ -265,7 +286,6 @@ config MACH_SBC3530
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CUS
select OMAP_MUX
config MACH_OMAP_3630SDP
bool "OMAP3630 SDP board"
@ -277,11 +297,15 @@ config MACH_OMAP_4430SDP
bool "OMAP 4430 SDP board"
default y
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
config MACH_OMAP4_PANDA
bool "OMAP4 Panda Board"
default y
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
config OMAP3_EMU
bool "OMAP3 debugging peripherals"

81
arch/arm/mach-omap2/Makefile
View File

@ -4,30 +4,31 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
common.o
common.o gpio.o dma.o wd_timer.o
omap-2-3-common = irq.o sdrc.o prm2xxx_3xxx.o
omap-2-3-common = irq.o sdrc.o
hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
prcm-common = prcm.o powerdomain.o
clock-common = clock.o clock_common_data.o \
clockdomain.o clkt_dpll.o \
clkt_clksel.o
clkt_dpll.o clkt_clksel.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a
AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
@ -42,18 +43,29 @@ AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
obj-$(CONFIG_ARCH_OMAP2420) += mux2420.o
obj-$(CONFIG_ARCH_OMAP2430) += mux2430.o
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
obj-y += opp.o
obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
endif
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o voltage.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \
cpuidle34xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o voltage.o pm_bus.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
@ -65,10 +77,36 @@ endif
endif
# PRCM
obj-$(CONFIG_ARCH_OMAP2) += cm.o
obj-$(CONFIG_ARCH_OMAP3) += cm.o
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
# will be removed once the OMAP4 part of the codebase is converted to
# use OMAP4-specific PRCM functions.
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
cm44xx.o prcm_mpu44xx.o \
prminst44xx.o
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
powerdomain2xxx_3xxx.o \
powerdomains2xxx_data.o \
powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
powerdomain2xxx_3xxx.o \
powerdomains3xxx_data.o \
powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
powerdomain44xx.o \
powerdomains44xx_data.o
# PRCM clockdomain control
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
clockdomains44xx_data.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
clkt2xxx_sys.o \
@ -139,17 +177,20 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
hsmmc.o \
board-flash.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
sdram-nokia.o \
hsmmc.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-sdram.o \
sdram-nokia.o \
board-rx51-peripherals.o \
board-rx51-video.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
board-zoom-peripherals.o \
board-flash.o \
hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
board-zoom-peripherals.o \
board-flash.o \
hsmmc.o \
@ -174,6 +215,8 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
hsmmc.o
# Platform specific device init code

8
arch/arm/mach-omap2/board-2430sdp.c
View File

@ -135,7 +135,7 @@ static inline void board_smc91x_init(void)
#endif
static struct omap_board_config_kernel sdp2430_config[] = {
static struct omap_board_config_kernel sdp2430_config[] __initdata = {
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
@ -143,9 +143,9 @@ static void __init omap_2430sdp_init_irq(void)
{
omap_board_config = sdp2430_config;
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
@ -218,8 +218,6 @@ static struct omap_usb_config sdp2430_usb_config __initdata = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init omap_2430sdp_init(void)

6
arch/arm/mach-omap2/board-3430sdp.c
View File

@ -326,9 +326,9 @@ static void __init omap_3430sdp_init_irq(void)
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
}
static int sdp3430_batt_table[] = {
@ -663,8 +663,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
/*

8
arch/arm/mach-omap2/board-3630sdp.c
View File

@ -73,18 +73,16 @@ static void __init omap_sdp_init_irq(void)
{
omap_board_config = sdp_config;
omap_board_config_size = ARRAY_SIZE(sdp_config);
omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
omap2_init_common_infrastructure();
omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
/*

45
arch/arm/mach-omap2/board-4430sdp.c
View File

@ -23,6 +23,7 @@
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
#include <mach/hardware.h>
#include <mach/omap4-common.h>
@ -35,6 +36,7 @@
#include <plat/usb.h>
#include <plat/mmc.h>
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "control.h"
@ -96,6 +98,28 @@ static struct gpio_led_platform_data sdp4430_led_data = {
.num_leds = ARRAY_SIZE(sdp4430_gpio_leds),
};
static struct led_pwm sdp4430_pwm_leds[] = {
{
.name = "omap4:green:chrg",
.pwm_id = 1,
.max_brightness = 255,
.pwm_period_ns = 7812500,
},
};
static struct led_pwm_platform_data sdp4430_pwm_data = {
.num_leds = ARRAY_SIZE(sdp4430_pwm_leds),
.leds = sdp4430_pwm_leds,
};
static struct platform_device sdp4430_leds_pwm = {
.name = "leds_pwm",
.id = -1,
.dev = {
.platform_data = &sdp4430_pwm_data,
},
};
static int omap_prox_activate(struct device *dev)
{
gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
@ -203,6 +227,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_lcd_device,
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
&sdp4430_leds_pwm,
};
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
@ -217,12 +242,12 @@ static void __init omap_4430sdp_init_irq(void)
{
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
#endif
gic_init_irq();
omap_gpio_init();
}
static struct omap_musb_board_data musb_board_data = {
@ -464,6 +489,9 @@ static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
{
I2C_BOARD_INFO("tmp105", 0x48),
},
{
I2C_BOARD_INFO("bh1780", 0x29),
},
};
static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
{
@ -505,9 +533,22 @@ static void __init omap_sfh7741prox_init(void)
}
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init omap_4430sdp_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
omap4_i2c_init();
omap_sfh7741prox_init();

116
arch/arm/mach-omap2/board-am3517crane.c Normal file
View File

@ -0,0 +1,116 @@
/*
* Support for AM3517/05 Craneboard
* http://www.mistralsolutions.com/products/craneboard.php
*
* Copyright (C) 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
* Author: R.Srinath <srinath@mistralsolutions.com>
*
* Based on mach-omap2/board-am3517evm.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
* whether express or implied; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/usb.h>
#include "mux.h"
#include "control.h"
#define GPIO_USB_POWER 35
#define GPIO_USB_NRESET 38
/* Board initialization */
static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init am3517_crane_init_irq(void)
{
omap_board_config = am3517_crane_config;
omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = GPIO_USB_NRESET,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static void __init am3517_crane_init(void)
{
int ret;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
/* Configure GPIO for EHCI port */
if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
GPIO_USB_NRESET);
return;
}
if (omap_mux_init_gpio(GPIO_USB_POWER, OMAP_PIN_OUTPUT)) {
pr_err("Can not configure mux for GPIO_USB_POWER %d\n",
GPIO_USB_POWER);
return;
}
ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable");
if (ret < 0) {
pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
return;
}
ret = gpio_direction_output(GPIO_USB_POWER, 1);
if (ret < 0) {
gpio_free(GPIO_USB_POWER);
pr_err("Unable to initialize EHCI power\n");
return;
}
usb_ehci_init(&ehci_pdata);
}
MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
.reserve = omap_reserve,
.init_irq = am3517_crane_init_irq,
.init_machine = am3517_crane_init,
.timer = &omap_timer,
MACHINE_END

7
arch/arm/mach-omap2/board-am3517evm.c
View File

@ -389,10 +389,9 @@ static void __init am3517_evm_init_irq(void)
{
omap_board_config = am3517_evm_config;
omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct omap_musb_board_data musb_board_data = {
@ -442,8 +441,6 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif

10
arch/arm/mach-omap2/board-apollon.c
View File

@ -270,7 +270,7 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel apollon_config[] = {
static struct omap_board_config_kernel apollon_config[] __initdata = {
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
@ -278,10 +278,9 @@ static void __init omap_apollon_init_irq(void)
{
omap_board_config = apollon_config;
omap_board_config_size = ARRAY_SIZE(apollon_config);
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
omap_gpio_init();
apollon_init_smc91x();
}
static void __init apollon_led_init(void)
@ -314,8 +313,6 @@ static void __init apollon_usb_init(void)
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init omap_apollon_init(void)
@ -324,6 +321,7 @@ static void __init omap_apollon_init(void)
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
apollon_init_smc91x();
apollon_led_init();
apollon_flash_init();
apollon_usb_init();

15
arch/arm/mach-omap2/board-cm-t35.c
View File

@ -600,8 +600,8 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6,
.reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7,
.reset_gpio_port[2] = -EINVAL
};
@ -630,12 +630,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
cm_t35_vmmc1_supply.dev = mmc[0].dev;
cm_t35_vsim_supply.dev = mmc[0].dev;
/* setup USB with proper PHY reset GPIOs */
ehci_pdata.reset_gpio_port[0] = gpio + 6;
ehci_pdata.reset_gpio_port[1] = gpio + 7;
usb_ehci_init(&ehci_pdata);
return 0;
}
@ -683,10 +677,10 @@ static void __init cm_t35_init_irq(void)
omap_board_config = cm_t35_config;
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct omap_board_mux board_mux[] __initdata = {
@ -805,6 +799,7 @@ static void __init cm_t35_init(void)
cm_t35_init_display();
usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
}
MACHINE_START(CM_T35, "Compulab CM-T35")

4
arch/arm/mach-omap2/board-cm-t3517.c
View File

@ -248,9 +248,9 @@ static void __init cm_t3517_init_irq(void)
omap_board_config = cm_t3517_config;
omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct omap_board_mux board_mux[] __initdata = {

14
arch/arm/mach-omap2/board-devkit8000.c
View File

@ -118,27 +118,27 @@ static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value(dssdev->reset_gpio, 1);
gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
}
static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value(dssdev->reset_gpio, 0);
gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value(dssdev->reset_gpio, 1);
gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
}
static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value(dssdev->reset_gpio, 0);
gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
static struct regulator_consumer_supply devkit8000_vmmc1_supply =
@ -444,13 +444,13 @@ static struct platform_device keys_gpio = {
static void __init devkit8000_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap_gpio_init();
}
static void __init devkit8000_ads7846_init(void)

3
arch/arm/mach-omap2/board-generic.c
View File

@ -37,7 +37,8 @@ static void __init omap_generic_init_irq(void)
{
omap_board_config = generic_config;
omap_board_config_size = ARRAY_SIZE(generic_config);
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
}

71
arch/arm/mach-omap2/board-h4.c
View File

@ -51,38 +51,37 @@
static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
static int h4_keymap[] = {
static const unsigned int h4_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_A),
KEY(0, 3, KEY_B),
KEY(0, 4, KEY_C),
KEY(1, 0, KEY_DOWN),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_A),
KEY(3, 0, KEY_B),
KEY(4, 0, KEY_C),
KEY(0, 1, KEY_DOWN),
KEY(1, 1, KEY_UP),
KEY(1, 2, KEY_E),
KEY(1, 3, KEY_F),
KEY(1, 4, KEY_G),
KEY(2, 0, KEY_ENTER),
KEY(2, 1, KEY_I),
KEY(2, 1, KEY_E),
KEY(3, 1, KEY_F),
KEY(4, 1, KEY_G),
KEY(0, 2, KEY_ENTER),
KEY(1, 2, KEY_I),
KEY(2, 2, KEY_J),
KEY(2, 3, KEY_K),
KEY(2, 4, KEY_3),
KEY(3, 0, KEY_M),
KEY(3, 1, KEY_N),
KEY(3, 2, KEY_O),
KEY(3, 2, KEY_K),
KEY(4, 2, KEY_3),
KEY(0, 3, KEY_M),
KEY(1, 3, KEY_N),
KEY(2, 3, KEY_O),
KEY(3, 3, KEY_P),
KEY(3, 4, KEY_Q),
KEY(4, 0, KEY_R),
KEY(4, 1, KEY_4),
KEY(4, 2, KEY_T),
KEY(4, 3, KEY_U),
KEY(4, 3, KEY_Q),
KEY(0, 4, KEY_R),
KEY(1, 4, KEY_4),
KEY(2, 4, KEY_T),
KEY(3, 4, KEY_U),
KEY(4, 4, KEY_ENTER),
KEY(5, 0, KEY_V),
KEY(5, 1, KEY_W),
KEY(5, 2, KEY_L),
KEY(5, 3, KEY_S),
KEY(5, 4, KEY_ENTER),
0
KEY(0, 5, KEY_V),
KEY(1, 5, KEY_W),
KEY(2, 5, KEY_L),
KEY(3, 5, KEY_S),
KEY(4, 5, KEY_ENTER),
};
static struct mtd_partition h4_partitions[] = {
@ -136,12 +135,16 @@ static struct platform_device h4_flash_device = {
.resource = &h4_flash_resource,
};
static const struct matrix_keymap_data h4_keymap_data = {
.keymap = h4_keymap,
.keymap_size = ARRAY_SIZE(h4_keymap),
};
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
.keymap = h4_keymap,
.keymapsize = ARRAY_SIZE(h4_keymap),
.rep = 1,
.keymap_data = &h4_keymap_data,
.rep = true,
.row_gpios = row_gpios,
.col_gpios = col_gpios,
};
@ -283,7 +286,7 @@ static struct omap_usb_config h4_usb_config __initdata = {
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
};
static struct omap_board_config_kernel h4_config[] = {
static struct omap_board_config_kernel h4_config[] __initdata = {
{ OMAP_TAG_LCD, &h4_lcd_config },
};
@ -291,9 +294,9 @@ static void __init omap_h4_init_irq(void)
{
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
omap_gpio_init();
h4_init_flash();
}
@ -321,8 +324,6 @@ static struct i2c_board_info __initdata h4_i2c_board_info[] = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init omap_h4_init(void)

124
arch/arm/mach-omap2/board-igep0020.c
View File

@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
@ -136,16 +137,9 @@ static struct mtd_partition igep2_onenand_partitions[] = {
},
};
static int igep2_onenand_setup(void __iomem *onenand_base, int freq)
{
/* nothing is required to be setup for onenand as of now */
return 0;
}
static struct omap_onenand_platform_data igep2_onenand_data = {
.parts = igep2_onenand_partitions,
.nr_parts = ARRAY_SIZE(igep2_onenand_partitions),
.onenand_setup = igep2_onenand_setup,
.dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
};
@ -159,35 +153,34 @@ static struct platform_device igep2_onenand_device = {
static void __init igep2_flash_init(void)
{
u8 cs = 0;
u8 onenandcs = GPMC_CS_NUM + 1;
u8 cs = 0;
u8 onenandcs = GPMC_CS_NUM + 1;
while (cs < GPMC_CS_NUM) {
u32 ret = 0;
for (cs = 0; cs < GPMC_CS_NUM; cs++) {
u32 ret;
ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
/* Check if NAND/oneNAND is configured */
if ((ret & 0xC00) == 0x800)
/* NAND found */
pr_err("IGEP v2: Unsupported NAND found\n");
pr_err("IGEP2: Unsupported NAND found\n");
else {
ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
if ((ret & 0x3F) == (ONENAND_MAP >> 24))
/* ONENAND found */
onenandcs = cs;
}
cs++;
}
if (onenandcs > GPMC_CS_NUM) {
pr_err("IGEP v2: Unable to find configuration in GPMC\n");
pr_err("IGEP2: Unable to find configuration in GPMC\n");
return;
}
if (onenandcs < GPMC_CS_NUM) {
igep2_onenand_data.cs = onenandcs;
if (platform_device_register(&igep2_onenand_device) < 0)
pr_err("IGEP v2: Unable to register OneNAND device\n");
}
igep2_onenand_data.cs = onenandcs;
if (platform_device_register(&igep2_onenand_device) < 0)
pr_err("IGEP2: Unable to register OneNAND device\n");
}
#else
@ -254,12 +247,8 @@ static inline void __init igep2_init_smsc911x(void)
static inline void __init igep2_init_smsc911x(void) { }
#endif
static struct omap_board_config_kernel igep2_config[] __initdata = {
};
static struct regulator_consumer_supply igep2_vmmc1_supply = {
.supply = "vmmc",
};
static struct regulator_consumer_supply igep2_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep2_vmmc1 = {
@ -276,6 +265,52 @@ static struct regulator_init_data igep2_vmmc1 = {
.consumer_supplies = &igep2_vmmc1_supply,
};
static struct regulator_consumer_supply igep2_vio_supply =
REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
static struct regulator_init_data igep2_vio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep2_vio_supply,
};
static struct regulator_consumer_supply igep2_vmmc2_supply =
REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
static struct regulator_init_data igep2_vmmc2 = {
.constraints = {
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep2_vmmc2_supply,
};
static struct fixed_voltage_config igep2_vwlan = {
.supply_name = "vwlan",
.microvolts = 3300000,
.gpio = -EINVAL,
.enabled_at_boot = 1,
.init_data = &igep2_vmmc2,
};
static struct platform_device igep2_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &igep2_vwlan,
},
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@ -317,6 +352,7 @@ static struct gpio_led igep2_gpio_leds[] = {
.name = "gpio-led:green:d1",
.default_trigger = "heartbeat",
.gpio = -EINVAL, /* gets replaced */
.active_low = 1,
},
};
@ -342,24 +378,21 @@ static void __init igep2_leds_init(void)
static inline void igep2_leds_init(void)
{
if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
(gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
(gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0))
gpio_export(IGEP2_GPIO_LED0_RED, 0);
gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
} else
else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
(gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
(gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0))
gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
} else
else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
(gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
(gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0))
gpio_export(IGEP2_GPIO_LED1_RED, 0);
gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
} else
else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
}
@ -372,12 +405,6 @@ static int igep2_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/*
* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
igep2_vmmc1_supply.dev = mmc[0].dev;
/*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
@ -397,10 +424,9 @@ static int igep2_twl_gpio_setup(struct device *dev,
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
&& (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
&& (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0))
gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
} else
else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
#else
igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
@ -489,15 +515,15 @@ static void __init igep2_display_init(void)
static struct platform_device *igep2_devices[] __initdata = {
&igep2_dss_device,
&igep2_vwlan_device,
};
static void __init igep2_init_irq(void)
{
omap_board_config = igep2_config;
omap_board_config_size = ARRAY_SIZE(igep2_config);
omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
omap2_init_common_infrastructure();
omap2_init_common_devices(m65kxxxxam_sdrc_params,
m65kxxxxam_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct twl4030_codec_audio_data igep2_audio_data = {
@ -519,7 +545,7 @@ static struct twl4030_platform_data igep2_twldata = {
.gpio = &igep2_twl4030_gpio_pdata,
.vmmc1 = &igep2_vmmc1,
.vpll2 = &igep2_vpll2,
.vio = &igep2_vio,
};
static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = {
@ -577,8 +603,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)

7
arch/arm/mach-omap2/board-igep0030.c
View File

@ -289,9 +289,10 @@ static struct twl4030_usb_data igep3_twl4030_usb_data = {
static void __init igep3_init_irq(void)
{
omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
omap2_init_common_infrastructure();
omap2_init_common_devices(m65kxxxxam_sdrc_params,
m65kxxxxam_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct twl4030_platform_data igep3_twl4030_pdata = {
@ -366,8 +367,6 @@ void __init igep3_wifi_bt_init(void) {}
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init igep3_init(void)

8
arch/arm/mach-omap2/board-ldp.c
View File

@ -292,10 +292,9 @@ static void __init omap_ldp_init_irq(void)
{
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smsc911x();
}
static struct twl4030_usb_data ldp_usb_data = {
@ -381,8 +380,6 @@ static struct platform_device *ldp_devices[] __initdata = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static struct omap_musb_board_data musb_board_data = {
@ -426,6 +423,7 @@ static struct mtd_partition ldp_nand_partitions[] = {
static void __init omap_ldp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
ldp_init_smsc911x();
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
ts_gpio = 54;

70
arch/arm/mach-omap2/board-n8x0.c
View File

@ -184,23 +184,15 @@ static struct mtd_partition onenand_partitions[] = {
},
};
static struct omap_onenand_platform_data board_onenand_data = {
.cs = 0,
.gpio_irq = 26,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
.flags = ONENAND_SYNC_READ,
static struct omap_onenand_platform_data board_onenand_data[] = {
{
.cs = 0,
.gpio_irq = 26,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
.flags = ONENAND_SYNC_READ,
}
};
static void __init n8x0_onenand_init(void)
{
gpmc_onenand_init(&board_onenand_data);
}
#else
static void __init n8x0_onenand_init(void) {}
#endif
#if defined(CONFIG_MENELAUS) && \
@ -639,9 +631,9 @@ static void __init n8x0_map_io(void)
static void __init n8x0_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
#ifdef CONFIG_OMAP_MUX
@ -653,8 +645,43 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_device_pad serial2_pads[] __initdata = {
{
.name = "uart3_rx_irrx.uart3_rx_irrx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_MUX_MODE0,
.idle = OMAP_MUX_MODE3 /* Mux as GPIO for idle */
},
};
static inline void board_serial_init(void)
{
struct omap_board_data bdata;
bdata.flags = 0;
bdata.pads = NULL;
bdata.pads_cnt = 0;
bdata.id = 0;
omap_serial_init_port(&bdata);
bdata.id = 1;
omap_serial_init_port(&bdata);
bdata.id = 2;
bdata.pads = serial2_pads;
bdata.pads_cnt = ARRAY_SIZE(serial2_pads);
omap_serial_init_port(&bdata);
}
#else
#define board_mux NULL
static inline void board_serial_init(void)
{
omap_serial_init();
}
#endif
static void __init n8x0_init_machine(void)
@ -669,9 +696,8 @@ static void __init n8x0_init_machine(void)
if (machine_is_nokia_n810())
i2c_register_board_info(2, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
omap_serial_init();
n8x0_onenand_init();
board_serial_init();
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
}

8
arch/arm/mach-omap2/board-omap3beagle.c
View File

@ -484,13 +484,13 @@ static struct platform_device keys_gpio = {
static void __init omap3_beagle_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap_gpio_init();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
@ -548,8 +548,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static struct omap_musb_board_data musb_board_data = {

6
arch/arm/mach-omap2/board-omap3evm.c
View File

@ -623,9 +623,9 @@ static void __init omap3_evm_init_irq(void)
{
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device *omap3_evm_devices[] __initdata = {
@ -654,8 +654,6 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static struct omap_musb_board_data musb_board_data = {

6
arch/arm/mach-omap2/board-omap3logic.c
View File

@ -197,17 +197,15 @@ static inline void __init board_smsc911x_init(void)
static void __init omap3logic_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
omap_init_irq();
omap_gpio_init();
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init omap3logic_init(void)

10
arch/arm/mach-omap2/board-omap3pandora.c
View File

@ -293,7 +293,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
},
{
.mmc = 3,
.caps = MMC_CAP_4_BIT_DATA,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.init_card = pandora_wl1251_init_card,
@ -636,10 +636,10 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
static void __init omap3pandora_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static void __init pandora_wl1251_init(void)
@ -697,8 +697,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static struct omap_musb_board_data musb_board_data = {

6
arch/arm/mach-omap2/board-omap3stalker.c
View File

@ -584,12 +584,12 @@ static void __init omap3_stalker_init_irq(void)
{
omap_board_config = omap3_stalker_config;
omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap_gpio_init();
}
static struct platform_device *omap3_stalker_devices[] __initdata = {
@ -616,8 +616,6 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
{.reg_offset = OMAP_MUX_TERMINATOR},
};
#else
#define board_mux NULL
#endif
static struct omap_musb_board_data musb_board_data = {

8
arch/arm/mach-omap2/board-omap3touchbook.c
View File

@ -413,8 +413,6 @@ static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init omap3_touchbook_init_irq(void)
@ -422,13 +420,13 @@ static void __init omap3_touchbook_init_irq(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = omap3_touchbook_config;
omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap_gpio_init();
}
static struct platform_device *omap3_touchbook_devices[] __initdata = {

22
arch/arm/mach-omap2/board-omap4panda.c
View File

@ -40,6 +40,7 @@
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
#define GPIO_HUB_POWER 1
#define GPIO_HUB_NRESET 62
@ -76,9 +77,9 @@ static struct platform_device *panda_devices[] __initdata = {
static void __init omap4_panda_init_irq(void)
{
omap2_init_common_hw(NULL, NULL);
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
gic_init_irq();
omap_gpio_init();
}
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@ -142,6 +143,7 @@ static struct omap2_hsmmc_info mmc[] = {
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
},
{} /* Terminator */
};
@ -368,8 +370,23 @@ static int __init omap4_panda_i2c_init(void)
omap_register_i2c_bus(4, 400, NULL, 0);
return 0;
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
omap_serial_init();
@ -391,6 +408,7 @@ static void __init omap4_panda_map_io(void)
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap4_panda_map_io,
.init_irq = omap4_panda_init_irq,
.init_machine = omap4_panda_init,

8
arch/arm/mach-omap2/board-overo.c
View File

@ -413,10 +413,10 @@ static void __init overo_init_irq(void)
{
omap_board_config = overo_config;
omap_board_config_size = ARRAY_SIZE(overo_config);
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap2_init_common_infrastructure();
omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device *overo_devices[] __initdata = {
@ -438,8 +438,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static struct omap_musb_board_data musb_board_data = {

187
arch/arm/mach-omap2/board-rm680.c Normal file
View File

@ -0,0 +1,187 @@
/*
* Board support file for Nokia RM-680.
*
* Copyright (C) 2010 Nokia
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/i2c/twl.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/i2c.h>
#include <plat/mmc.h>
#include <plat/usb.h>
#include <plat/gpmc.h>
#include <plat/common.h>
#include <plat/onenand.h>
#include "mux.h"
#include "hsmmc.h"
#include "sdram-nokia.h"
static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
};
/* Fixed regulator for internal eMMC */
static struct regulator_init_data rm680_vemmc = {
.constraints = {
.name = "rm680_vemmc",
.min_uV = 2900000,
.max_uV = 2900000,
.apply_uV = 1,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_STATUS
| REGULATOR_CHANGE_MODE,
},
.num_consumer_supplies = ARRAY_SIZE(rm680_vemmc_consumers),
.consumer_supplies = rm680_vemmc_consumers,
};
static struct fixed_voltage_config rm680_vemmc_config = {
.supply_name = "VEMMC",
.microvolts = 2900000,
.gpio = 157,
.startup_delay = 150,
.enable_high = 1,
.init_data = &rm680_vemmc,
};
static struct platform_device rm680_vemmc_device = {
.name = "reg-fixed-voltage",
.dev = {
.platform_data = &rm680_vemmc_config,
},
};
static struct platform_device *rm680_peripherals_devices[] __initdata = {
&rm680_vemmc_device,
};
/* TWL */
static struct twl4030_gpio_platform_data rm680_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.pullups = BIT(0),
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
static struct twl4030_usb_data rm680_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_platform_data rm680_twl_data = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &rm680_gpio_data,
.usb = &rm680_usb_data,
/* add rest of the children here */
};
static struct i2c_board_info __initdata rm680_twl_i2c_board_info[] = {
{
I2C_BOARD_INFO("twl5031", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &rm680_twl_data,
},
};
static void __init rm680_i2c_init(void)
{
omap_register_i2c_bus(1, 2900, rm680_twl_i2c_board_info,
ARRAY_SIZE(rm680_twl_i2c_board_info));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
}
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
static struct omap_onenand_platform_data board_onenand_data[] = {
{
.gpio_irq = 65,
.flags = ONENAND_SYNC_READWRITE,
}
};
#endif
/* eMMC */
static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "internal",
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{ /* Terminator */ }
};
static void __init rm680_peripherals_init(void)
{
platform_add_devices(rm680_peripherals_devices,
ARRAY_SIZE(rm680_peripherals_devices));
rm680_i2c_init();
gpmc_onenand_init(board_onenand_data);
omap2_hsmmc_init(mmc);
}
static void __init rm680_init_irq(void)
{
struct omap_sdrc_params *sdrc_params;
omap2_init_common_infrastructure();
sdrc_params = nokia_get_sdram_timings();
omap2_init_common_devices(sdrc_params, sdrc_params);
omap_init_irq();
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
static struct omap_musb_board_data rm680_musb_data = {
.interface_type = MUSB_INTERFACE_ULPI,
.mode = MUSB_PERIPHERAL,
.power = 100,
};
static void __init rm680_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
usb_musb_init(&rm680_musb_data);
rm680_peripherals_init();
}
static void __init rm680_map_io(void)
{
omap2_set_globals_3xxx();
omap34xx_map_common_io();
}
MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.boot_params = 0x80000100,
.map_io = rm680_map_io,
.reserve = omap_reserve,
.init_irq = rm680_init_irq,
.init_machine = rm680_init,
.timer = &omap_timer,
MACHINE_END

77
arch/arm/mach-omap2/board-rx51-peripherals.c
View File

@ -23,7 +23,6 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <sound/tlv320aic3x.h>
#include <plat/mcspi.h>
#include <plat/board.h>
@ -293,6 +292,8 @@ static struct omap_board_mux rx51_mmc2_off_mux[] = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static struct omap_mux_partition *partition;
/*
* Current flows to eMMC when eMMC is off and the data lines are pulled up,
* so pull them down. N.B. we pull 8 lines because we are using 8 lines.
@ -300,9 +301,9 @@ static struct omap_board_mux rx51_mmc2_off_mux[] = {
static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
{
if (power_on)
omap_mux_write_array(rx51_mmc2_on_mux);
omap_mux_write_array(partition, rx51_mmc2_on_mux);
else
omap_mux_write_array(rx51_mmc2_off_mux);
omap_mux_write_array(partition, rx51_mmc2_off_mux);
}
static struct omap2_hsmmc_info mmc[] __initdata = {
@ -342,6 +343,8 @@ static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
/* tlv320aic3x analog supplies */
REGULATOR_SUPPLY("AVDD", "2-0018"),
REGULATOR_SUPPLY("DRVDD", "2-0018"),
REGULATOR_SUPPLY("AVDD", "2-0019"),
REGULATOR_SUPPLY("DRVDD", "2-0019"),
/* tpa6130a2 */
REGULATOR_SUPPLY("Vdd", "2-0060"),
/* Keep vmmc as last item. It is not iterated for newer boards */
@ -352,19 +355,16 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = {
/* tlv320aic3x digital supplies */
REGULATOR_SUPPLY("IOVDD", "2-0018"),
REGULATOR_SUPPLY("DVDD", "2-0018"),
REGULATOR_SUPPLY("IOVDD", "2-0019"),
REGULATOR_SUPPLY("DVDD", "2-0019"),
};
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
extern struct platform_device rx51_display_device;
#endif
static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
{
.supply = "vdds_sdi",
.dev = &rx51_display_device.dev,
},
#endif
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
};
static struct regulator_consumer_supply rx51_vdac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss"),
};
static struct regulator_init_data rx51_vaux1 = {
@ -484,14 +484,17 @@ static struct regulator_init_data rx51_vsim = {
static struct regulator_init_data rx51_vdac = {
.constraints = {
.name = "VDAC",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = rx51_vdac_supply,
};
static struct regulator_init_data rx51_vio = {
@ -717,7 +720,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
.vio = &rx51_vio,
};
static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = {
static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = {
.id = TPA6130A2,
.power_gpio = 98,
};
@ -742,11 +745,19 @@ static struct aic3x_pdata rx51_aic3x_data = {
.gpio_reset = 60,
};
static struct aic3x_pdata rx51_aic3x_data2 = {
.gpio_reset = 60,
};
static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
.platform_data = &rx51_aic3x_data,
},
{
I2C_BOARD_INFO("tlv320aic3x", 0x19),
.platform_data = &rx51_aic3x_data2,
},
#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
{
I2C_BOARD_INFO("tsl2563", 0x29),
@ -815,25 +826,15 @@ static struct mtd_partition onenand_partitions[] = {
},
};
static struct omap_onenand_platform_data board_onenand_data = {
.cs = 0,
.gpio_irq = 65,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
.flags = ONENAND_SYNC_READWRITE,
static struct omap_onenand_platform_data board_onenand_data[] = {
{
.cs = 0,
.gpio_irq = 65,
.parts = onenand_partitions,
.nr_parts = ARRAY_SIZE(onenand_partitions),
.flags = ONENAND_SYNC_READWRITE,
}
};
static void __init board_onenand_init(void)
{
gpmc_onenand_init(&board_onenand_data);
}
#else
static inline void board_onenand_init(void)
{
}
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
@ -916,13 +917,17 @@ error:
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
board_onenand_init();
gpmc_onenand_init(board_onenand_data);
board_smc91x_init();
rx51_add_gpio_keys();
rx51_init_wl1251();
spi_register_board_info(rx51_peripherals_spi_board_info,
ARRAY_SIZE(rx51_peripherals_spi_board_info));
omap2_hsmmc_init(mmc);
partition = omap_mux_get("core");
if (partition)
omap2_hsmmc_init(mmc);
platform_device_register(&rx51_charger_device);
}

9
arch/arm/mach-omap2/board-rx51-video.c
View File

@ -14,7 +14,6 @@
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/mm.h>
#include <asm/mach-types.h>
#include <plat/display.h>
#include <plat/vram.h>
@ -49,8 +48,16 @@ static struct omap_dss_device rx51_lcd_device = {
.platform_disable = rx51_lcd_disable,
};
static struct omap_dss_device rx51_tv_device = {
.name = "tv",
.type = OMAP_DISPLAY_TYPE_VENC,
.driver_name = "venc",
.phy.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
};
static struct omap_dss_device *rx51_dss_devices[] = {
&rx51_lcd_device,
&rx51_tv_device,
};
static struct omap_dss_board_info rx51_dss_board_info = {

10
arch/arm/mach-omap2/board-rx51.c
View File

@ -32,10 +32,10 @@
#include "mux.h"
#include "pm.h"
#include "sdram-nokia.h"
#define RX51_GPIO_SLEEP_IND 162
struct omap_sdrc_params *rx51_get_sdram_timings(void);
extern void rx51_video_mem_init(void);
static struct gpio_led gpio_leds[] = {
@ -105,10 +105,10 @@ static void __init rx51_init_irq(void)
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap3_pm_init_cpuidle(rx51_cpuidle_params);
sdrc_params = rx51_get_sdram_timings();
omap2_init_common_hw(sdrc_params, sdrc_params);
omap2_init_common_infrastructure();
sdrc_params = nokia_get_sdram_timings();
omap2_init_common_devices(sdrc_params, sdrc_params);
omap_init_irq();
omap_gpio_init();
}
extern void __init rx51_peripherals_init(void);
@ -117,8 +117,6 @@ extern void __init rx51_peripherals_init(void);
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static struct omap_musb_board_data musb_board_data = {

2
arch/arm/mach-omap2/board-zoom-peripherals.c
View File

@ -196,7 +196,7 @@ struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
.board_ref_clock = 1,
};
static struct omap2_hsmmc_info mmc[] __initdata = {
static struct omap2_hsmmc_info mmc[] = {
{
.name = "external",
.mmc = 1,

104
arch/arm/mach-omap2/board-zoom3.c → arch/arm/mach-omap2/board-zoom.c
View File

@ -1,6 +1,9 @@
/*
* Copyright (C) 2009 Texas Instruments Inc.
* Copyright (C) 2009-2010 Texas Instruments Inc.
* Mikkel Christensen <mlc@ti.com>
* Felipe Balbi <balbi@ti.com>
*
* Modified from mach-omap2/board-ldp.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -12,22 +15,55 @@
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/board-zoom.h>
#include <plat/common.h>
#include <plat/board.h>
#include <plat/usb.h>
#include <mach/board-zoom.h>
#include "board-flash.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
static struct omap_board_config_kernel zoom_config[] __initdata = {
#define ZOOM3_EHCI_RESET_GPIO 64
static void __init omap_zoom_init_irq(void)
{
omap2_init_common_infrastructure();
if (machine_is_omap_zoom2())
omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
else if (machine_is_omap_zoom3())
omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
omap_init_irq();
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
/* WLAN POWER ENABLE - GPIO 101 */
OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* WLAN SDIO: MMC3 CMD */
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC3 CLK */
OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC3 DAT[0-3] */
OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
static struct mtd_partition zoom_nand_partitions[] = {
/* All the partition sizes are listed in terms of NAND block size */
@ -70,59 +106,41 @@ static struct mtd_partition zoom_nand_partitions[] = {
},
};
static void __init omap_zoom_init_irq(void)
{
omap_board_config = zoom_config;
omap_board_config_size = ARRAY_SIZE(zoom_config);
omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
/* WLAN POWER ENABLE - GPIO 101 */
OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* WLAN SDIO: MMC3 CMD */
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC3 CLK */
OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC3 DAT[0-3] */
OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = 64,
.reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO,
.reset_gpio_port[2] = -EINVAL,
};
static void __init omap_zoom_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
zoom_peripherals_init();
board_nand_init(zoom_nand_partitions,
ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
zoom_debugboard_init();
if (machine_is_omap_zoom2()) {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
} else if (machine_is_omap_zoom3()) {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
usb_ehci_init(&ehci_pdata);
}
omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
usb_ehci_init(&ehci_pdata);
board_nand_init(zoom_nand_partitions,
ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
zoom_debugboard_init();
zoom_peripherals_init();
}
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
.reserve = omap_reserve,
.init_irq = omap_zoom_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap_timer,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,

117
arch/arm/mach-omap2/board-zoom2.c
View File

@ -1,117 +0,0 @@
/*
* Copyright (C) 2009 Texas Instruments Inc.
* Mikkel Christensen <mlc@ti.com>
*
* Modified from mach-omap2/board-ldp.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/common.h>
#include <plat/board.h>
#include <mach/board-zoom.h>
#include "board-flash.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
static void __init omap_zoom2_init_irq(void)
{
omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
/* WLAN POWER ENABLE - GPIO 101 */
OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* WLAN SDIO: MMC3 CMD */
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC3 CLK */
OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC3 DAT[0-3] */
OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static struct mtd_partition zoom_nand_partitions[] = {
/* All the partition sizes are listed in terms of NAND block size */
{
.name = "X-Loader-NAND",
.offset = 0,
.size = 4 * (64 * 2048), /* 512KB, 0x80000 */
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "U-Boot-NAND",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
.size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "Boot Env-NAND",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
.size = 2 * (64 * 2048), /* 256KB, 0x40000 */
},
{
.name = "Kernel-NAND",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/
.size = 240 * (64 * 2048), /* 30M, 0x1E00000 */
},
{
.name = "system",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */
.size = 3328 * (64 * 2048), /* 416M, 0x1A000000 */
},
{
.name = "userdata",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1C000000*/
.size = 256 * (64 * 2048), /* 32M, 0x2000000 */
},
{
.name = "cache",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1E000000*/
.size = 256 * (64 * 2048), /* 32M, 0x2000000 */
},
};
static void __init omap_zoom2_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
zoom_peripherals_init();
board_nand_init(zoom_nand_partitions,
ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
zoom_debugboard_init();
}
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
.reserve = omap_reserve,
.init_irq = omap_zoom2_init_irq,
.init_machine = omap_zoom2_init,
.timer = &omap_timer,
MACHINE_END

12
arch/arm/mach-omap2/clkt2xxx_apll.c
View File

@ -26,7 +26,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
@ -49,14 +49,14 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
apll_mask = EN_APLL_LOCKED << clk->enable_bit;
cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
if ((cval & apll_mask) == apll_mask)
return 0; /* apll already enabled */
cval &= ~apll_mask;
cval |= apll_mask;
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
OMAP24XX_CM_IDLEST_VAL, clk->name);
@ -83,9 +83,9 @@ static void omap2_clk_apll_disable(struct clk *clk)
{
u32 cval;
cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
}
/* Public data */
@ -106,7 +106,7 @@ u32 omap2xxx_get_apll_clkin(void)
{
u32 aplls, srate = 0;
aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
aplls = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
aplls &= OMAP24XX_APLLS_CLKIN_MASK;
aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;

10
arch/arm/mach-omap2/clkt2xxx_dpllcore.c
View File

@ -32,7 +32,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
@ -54,7 +54,7 @@ unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
core_clk = omap2_get_dpll_rate(clk);
v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
v &= OMAP24XX_CORE_CLK_SRC_MASK;
if (v == CORE_CLK_SRC_32K)
@ -73,7 +73,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
{
u32 high, low, core_clk_src;
core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
core_clk_src = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */
@ -111,7 +111,7 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
const struct dpll_data *dd;
cur_rate = omap2xxx_clk_get_core_rate(dclk);
mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
if ((rate == (cur_rate / 2)) && (mult == 2)) {
@ -136,7 +136,7 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
dd->div1_mask);
div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
tmpset.cm_clksel2_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
if (rate > low) {
tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;

2
arch/arm/mach-omap2/clkt2xxx_osc.c
View File

@ -27,7 +27,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
static int omap2_enable_osc_ck(struct clk *clk)

2
arch/arm/mach-omap2/clkt2xxx_sys.c
View File

@ -26,7 +26,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
void __iomem *prcm_clksrc_ctrl;

14
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
View File

@ -40,7 +40,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
const struct prcm_config *curr_prcm_set;
@ -133,21 +133,21 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
done_rate = CORE_CLK_SRC_DPLL;
/* MPU divider */
cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
omap2_cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
/* dsp + iva1 div(2420), iva2.1(2430) */
cm_write_mod_reg(prcm->cm_clksel_dsp,
omap2_cm_write_mod_reg(prcm->cm_clksel_dsp,
OMAP24XX_DSP_MOD, CM_CLKSEL);
cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
omap2_cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
/* Major subsystem dividers */
tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
omap2_cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
CM_CLKSEL1);
if (cpu_is_omap2430())
cm_write_mod_reg(prcm->cm_clksel_mdm,
omap2_cm_write_mod_reg(prcm->cm_clksel_mdm,
OMAP2430_MDM_MOD, CM_CLKSEL);
/* x2 to enter omap2xxx_sdrc_init_params() */

1
arch/arm/mach-omap2/clkt_dpll.c
View File

@ -24,7 +24,6 @@
#include <plat/clock.h>
#include "clock.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"

6
arch/arm/mach-omap2/clock.c
View File

@ -24,14 +24,12 @@
#include <linux/bitops.h>
#include <plat/clock.h>
#include <plat/clockdomain.h>
#include "clockdomain.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include "clock.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"

1
arch/arm/mach-omap2/clock.h
View File

@ -49,7 +49,6 @@
/* DPLL Type and DCO Selection Flags */
#define DPLL_J_TYPE 0x1
#define DPLL_NO_DCO_SEL 0x2
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);

14
arch/arm/mach-omap2/clock2420_data.c
View File

@ -22,8 +22,8 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "prm.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
@ -812,7 +812,7 @@ static struct clk dss2_fck = { /* Alt clk used in power management */
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_DSS2_MASK,
.clksel = dss2_fck_clksel,
.recalc = &followparent_recalc,
.recalc = &omap2_clksel_recalc,
};
static struct clk dss_54m_fck = { /* Alt clk used in power management */
@ -1862,10 +1862,10 @@ static struct omap_clk omap2420_clks[] = {
CLK(NULL, "eac_fck", &eac_fck, CK_242X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X),
CLK("omap_hdq.1", "fck", &hdq_fck, CK_242X),
CLK("i2c_omap.1", "ick", &i2c1_ick, CK_242X),
CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X),
CLK("i2c_omap.2", "ick", &i2c2_ick, CK_242X),
CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X),
CLK("omap_i2c.1", "fck", &i2c1_fck, CK_242X),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X),
CLK("omap_i2c.2", "fck", &i2c2_fck, CK_242X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_242X),
CLK(NULL, "sdma_ick", &sdma_ick, CK_242X),

2
arch/arm/mach-omap2/clock2430.c
View File

@ -25,7 +25,7 @@
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
/**

14
arch/arm/mach-omap2/clock2430_data.c
View File

@ -22,8 +22,8 @@
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "prm.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
@ -800,7 +800,7 @@ static struct clk dss2_fck = { /* Alt clk used in power management */
.clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
.clksel_mask = OMAP24XX_CLKSEL_DSS2_MASK,
.clksel = dss2_fck_clksel,
.recalc = &followparent_recalc,
.recalc = &omap2_clksel_recalc,
};
static struct clk dss_54m_fck = { /* Alt clk used in power management */
@ -1969,10 +1969,10 @@ static struct omap_clk omap2430_clks[] = {
CLK(NULL, "fac_fck", &fac_fck, CK_243X),
CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X),
CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X),
CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X),
CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X),
CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X),
CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X),
CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X),
CLK("omap_i2c.1", "fck", &i2chs1_fck, CK_243X),
CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X),
CLK("omap_i2c.2", "fck", &i2chs2_fck, CK_243X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X),
CLK(NULL, "sdma_fck", &sdma_fck, CK_243X),
CLK(NULL, "sdma_ick", &sdma_ick, CK_243X),

2
arch/arm/mach-omap2/clock34xx.c
View File

@ -25,7 +25,7 @@
#include "clock.h"
#include "clock34xx.h"
#include "cm.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
/**

Some files were not shown because too many files have changed in this diff Show More