thermal: imx: dynamic passive and SoC specific critical trip points

Set passive and critical trip point values depending on the maximum die
temperature stored in the OCOTP fuses. This allows higher trip points
for industrial and automotive rated i.MX6 SoCs.
Also allow to configure the passive trip point from userspace.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This commit is contained in:
Philipp Zabel 2013-08-01 18:33:11 +02:00 committed by Zhang Rui
parent cba77f5312
commit 017e51420c
1 changed files with 40 additions and 10 deletions

View File

@ -55,12 +55,6 @@ enum imx_thermal_trip {
*/
#define IMX_TEMP_PASSIVE 85000
/*
* The maximum die temperature on imx parts is 105C, let's give some cushion
* for noise and possible temperature rise between measurements.
*/
#define IMX_TEMP_CRITICAL 100000
#define IMX_POLLING_DELAY 2000 /* millisecond */
#define IMX_PASSIVE_DELAY 1000
@ -70,6 +64,8 @@ struct imx_thermal_data {
enum thermal_device_mode mode;
struct regmap *tempmon;
int c1, c2; /* See formula in imx_get_sensor_data() */
unsigned long temp_passive;
unsigned long temp_critical;
};
static int imx_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
@ -156,15 +152,35 @@ static int imx_get_trip_type(struct thermal_zone_device *tz, int trip,
static int imx_get_crit_temp(struct thermal_zone_device *tz,
unsigned long *temp)
{
*temp = IMX_TEMP_CRITICAL;
struct imx_thermal_data *data = tz->devdata;
*temp = data->temp_critical;
return 0;
}
static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip,
unsigned long *temp)
{
*temp = (trip == IMX_TRIP_PASSIVE) ? IMX_TEMP_PASSIVE :
IMX_TEMP_CRITICAL;
struct imx_thermal_data *data = tz->devdata;
*temp = (trip == IMX_TRIP_PASSIVE) ? data->temp_passive :
data->temp_critical;
return 0;
}
static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
unsigned long temp)
{
struct imx_thermal_data *data = tz->devdata;
if (trip == IMX_TRIP_CRITICAL)
return -EPERM;
if (temp > IMX_TEMP_PASSIVE)
return -EINVAL;
data->temp_passive = temp;
return 0;
}
@ -211,6 +227,7 @@ static const struct thermal_zone_device_ops imx_tz_ops = {
.get_trip_type = imx_get_trip_type,
.get_trip_temp = imx_get_trip_temp,
.get_crit_temp = imx_get_crit_temp,
.set_trip_temp = imx_set_trip_temp,
};
static int imx_get_sensor_data(struct platform_device *pdev)
@ -267,6 +284,18 @@ static int imx_get_sensor_data(struct platform_device *pdev)
data->c1 = 1000 * (t1 - t2) / (n1 - n2);
data->c2 = 1000 * t2 - data->c1 * n2;
/*
* Set the default passive cooling trip point to 20 °C below the
* maximum die temperature. Can be changed from userspace.
*/
data->temp_passive = 1000 * (t2 - 20);
/*
* The maximum die temperature is t2, let's give 5 °C cushion
* for noise and possible temperature rise between measurements.
*/
data->temp_critical = 1000 * (t2 - 5);
return 0;
}
@ -314,7 +343,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
}
data->tz = thermal_zone_device_register("imx_thermal_zone",
IMX_TRIP_NUM, 0, data,
IMX_TRIP_NUM,
BIT(IMX_TRIP_PASSIVE), data,
&imx_tz_ops, NULL,
IMX_PASSIVE_DELAY,
IMX_POLLING_DELAY);