diff --git a/Documentation/DocBook/media/v4l/dev-codec.xml b/Documentation/DocBook/media/v4l/dev-codec.xml
index dca0ecd54dc6..ff44c16fc080 100644
--- a/Documentation/DocBook/media/v4l/dev-codec.xml
+++ b/Documentation/DocBook/media/v4l/dev-codec.xml
@@ -1,18 +1,27 @@
Codec Interface
-
- Suspended
-
- This interface has been be suspended from the V4L2 API
-implemented in Linux 2.6 until we have more experience with codec
-device interfaces.
-
-
A V4L2 codec can compress, decompress, transform, or otherwise
-convert video data from one format into another format, in memory.
-Applications send data to be converted to the driver through a
-&func-write; call, and receive the converted data through a
-&func-read; call. For efficiency a driver may also support streaming
-I/O.
+convert video data from one format into another format, in memory. Typically
+such devices are memory-to-memory devices (i.e. devices with the
+V4L2_CAP_VIDEO_M2M or V4L2_CAP_VIDEO_M2M_MPLANE
+capability set).
+
- [to do]
+ A memory-to-memory video node acts just like a normal video node, but it
+supports both output (sending frames from memory to the codec hardware) and
+capture (receiving the processed frames from the codec hardware into memory)
+stream I/O. An application will have to setup the stream
+I/O for both sides and finally call &VIDIOC-STREAMON; for both capture and output
+to start the codec.
+
+ Video compression codecs use the MPEG controls to setup their codec parameters
+(note that the MPEG controls actually support many more codecs than just MPEG).
+See .
+
+ Memory-to-memory devices can often be used as a shared resource: you can
+open the video node multiple times, each application setting up their own codec properties
+that are local to the file handle, and each can use it independently from the others.
+The driver will arbitrate access to the codec and reprogram it whenever another file
+handler gets access. This is different from the usual video node behavior where the video properties
+are global to the device (i.e. changing something through one file handle is visible
+through another file handle).
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index bfc93cdcf696..bfe823dd0f31 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -493,7 +493,7 @@ and discussions on the V4L mailing list.
Video for Linux Two API Specification
- Revision 3.9
+ Revision 3.10
&sub-common;
diff --git a/Documentation/bcache.txt b/Documentation/bcache.txt
index 77db8809bd96..b3a7e7d384f6 100644
--- a/Documentation/bcache.txt
+++ b/Documentation/bcache.txt
@@ -319,7 +319,10 @@ cache<0..n>
Symlink to each of the cache devices comprising this cache set.
cache_available_percent
- Percentage of cache device free.
+ Percentage of cache device which doesn't contain dirty data, and could
+ potentially be used for writeback. This doesn't mean this space isn't used
+ for clean cached data; the unused statistic (in priority_stats) is typically
+ much lower.
clear_stats
Clears the statistics associated with this cache
@@ -423,8 +426,11 @@ nbuckets
Total buckets in this cache
priority_stats
- Statistics about how recently data in the cache has been accessed. This can
- reveal your working set size.
+ Statistics about how recently data in the cache has been accessed.
+ This can reveal your working set size. Unused is the percentage of
+ the cache that doesn't contain any data. Metadata is bcache's
+ metadata overhead. Average is the average priority of cache buckets.
+ Next is a list of quantiles with the priority threshold of each.
written
Sum of all data that has been written to the cache; comparison with
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 08f01e79c41a..b9015912bca6 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -498,12 +498,8 @@ Your cooperation is appreciated.
Each device type has 5 bits (32 minors).
- 13 block 8-bit MFM/RLL/IDE controller
- 0 = /dev/xda First XT disk whole disk
- 64 = /dev/xdb Second XT disk whole disk
-
- Partitions are handled in the same way as IDE disks
- (see major number 3).
+ 13 block Previously used for the XT disk (/dev/xdN)
+ Deleted in kernel v3.9.
14 char Open Sound System (OSS)
0 = /dev/mixer Mixer control
diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
index 3f62adfb3e0b..de9f6b78ee51 100644
--- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
+++ b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
@@ -2,7 +2,7 @@ Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
Required properties:
-- compatible : should be "samsung,exynos4212-fimc" for Exynos4212 and
+- compatible : should be "samsung,exynos4212-fimc-lite" for Exynos4212 and
Exynos4412 SoCs;
- reg : physical base address and size of the device memory mapped
registers;
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 44afa0e5057d..4ff65047bb9a 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -4,7 +4,7 @@ Required properties:
- compatible: Should be "cdns,[-]{macb|gem}"
Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
- Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on
+ Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
the Cadence GEM, or the generic form: "cdns,gem".
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
index 2a3feabd3b22..34c1505774bf 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt
@@ -1,7 +1,7 @@
Atmel AT91RM9200 Real Time Clock
Required properties:
-- compatible: should be: "atmel,at91rm9200-rtc"
+- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: rtc alarm/event interrupt
diff --git a/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt b/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt
new file mode 100644
index 000000000000..b2d07ad90e9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/lsi,zevio-timer.txt
@@ -0,0 +1,33 @@
+TI-NSPIRE timer
+
+Required properties:
+
+- compatible : should be "lsi,zevio-timer".
+- reg : The physical base address and size of the timer (always first).
+- clocks: phandle to the source clock.
+
+Optional properties:
+
+- interrupts : The interrupt number of the first timer.
+- reg : The interrupt acknowledgement registers
+ (always after timer base address)
+
+If any of the optional properties are not given, the timer is added as a
+clock-source only.
+
+Example:
+
+timer {
+ compatible = "lsi,zevio-timer";
+ reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+ interrupts = <19>;
+ clocks = <&timer_clk>;
+};
+
+Example (no clock-events):
+
+timer {
+ compatible = "lsi,zevio-timer";
+ reg = <0x900D0000 0x1000>;
+ clocks = <&timer_clk>;
+};
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
similarity index 100%
rename from Documentation/devicetree/bindings/drm/exynos/hdmi.txt
rename to Documentation/devicetree/bindings/video/exynos_hdmi.txt
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt b/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt
similarity index 100%
rename from Documentation/devicetree/bindings/drm/exynos/hdmiddc.txt
rename to Documentation/devicetree/bindings/video/exynos_hdmiddc.txt
diff --git a/Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt b/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
similarity index 100%
rename from Documentation/devicetree/bindings/drm/exynos/hdmiphy.txt
rename to Documentation/devicetree/bindings/video/exynos_hdmiphy.txt
diff --git a/Documentation/devicetree/bindings/drm/exynos/mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt
similarity index 100%
rename from Documentation/devicetree/bindings/drm/exynos/mixer.txt
rename to Documentation/devicetree/bindings/video/exynos_mixer.txt
diff --git a/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
new file mode 100644
index 000000000000..3ea460583111
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/simple-framebuffer.txt
@@ -0,0 +1,25 @@
+Simple Framebuffer
+
+A simple frame-buffer describes a raw memory region that may be rendered to,
+with the assumption that the display hardware has already been set up to scan
+out from that buffer.
+
+Required properties:
+- compatible: "simple-framebuffer"
+- reg: Should contain the location and size of the framebuffer memory.
+- width: The width of the framebuffer in pixels.
+- height: The height of the framebuffer in pixels.
+- stride: The number of bytes in each line of the framebuffer.
+- format: The format of the framebuffer surface. Valid values are:
+ - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
+
+Example:
+
+ framebuffer {
+ compatible = "simple-framebuffer";
+ reg = <0x1d385000 (1600 * 1200 * 2)>;
+ width = <1600>;
+ height = <1200>;
+ stride = <(1600 * 2)>;
+ format = "r5g6b5";
+ };
diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt
index ef9d06c9f8fd..0efedaad5165 100644
--- a/Documentation/devicetree/usage-model.txt
+++ b/Documentation/devicetree/usage-model.txt
@@ -191,9 +191,11 @@ Linux it will look something like this:
};
The bootargs property contains the kernel arguments, and the initrd-*
-properties define the address and size of an initrd blob. The
-chosen node may also optionally contain an arbitrary number of
-additional properties for platform-specific configuration data.
+properties define the address and size of an initrd blob. Note that
+initrd-end is the first address after the initrd image, so this doesn't
+match the usual semantic of struct resource. The chosen node may also
+optionally contain an arbitrary number of additional properties for
+platform-specific configuration data.
During early boot, the architecture setup code calls of_scan_flat_dt()
several times with different helper callbacks to parse device tree
diff --git a/Documentation/dmatest.txt b/Documentation/dmatest.txt
index 279ac0a8c5b1..132a094c7bc3 100644
--- a/Documentation/dmatest.txt
+++ b/Documentation/dmatest.txt
@@ -34,7 +34,7 @@ command:
After a while you will start to get messages about current status or error like
in the original code.
-Note that running a new test will stop any in progress test.
+Note that running a new test will not stop any in progress test.
The following command should return actual state of the test.
% cat /sys/kernel/debug/dmatest/run
@@ -52,8 +52,8 @@ To wait for test done the user may perform a busy loop that checks the state.
The module parameters that is supplied to the kernel command line will be used
for the first performed test. After user gets a control, the test could be
-interrupted or re-run with same or different parameters. For the details see
-the above section "Part 2 - When dmatest is built as a module..."
+re-run with the same or different parameters. For the details see the above
+section "Part 2 - When dmatest is built as a module..."
In both cases the module parameters are used as initial values for the test case.
You always could check them at run-time by running
diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt
index 3e4b3dd1e046..83577f0232a0 100644
--- a/Documentation/filesystems/xfs.txt
+++ b/Documentation/filesystems/xfs.txt
@@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted.
removing extended attributes) the on-disk superblock feature
bit field will be updated to reflect this format being in use.
+ CRC enabled filesystems always use the attr2 format, and so
+ will reject the noattr2 mount option if it is set.
+
barrier
Enables the use of block layer write barriers for writes into
the journal and unwritten extent conversion. This allows for
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index c3bfacb92910..2fe6e767b3d6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3005,6 +3005,27 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Force threading of all interrupt handlers except those
marked explicitly IRQF_NO_THREAD.
+ tmem [KNL,XEN]
+ Enable the Transcendent memory driver if built-in.
+
+ tmem.cleancache=0|1 [KNL, XEN]
+ Default is on (1). Disable the usage of the cleancache
+ API to send anonymous pages to the hypervisor.
+
+ tmem.frontswap=0|1 [KNL, XEN]
+ Default is on (1). Disable the usage of the frontswap
+ API to send swap pages to the hypervisor. If disabled
+ the selfballooning and selfshrinking are force disabled.
+
+ tmem.selfballooning=0|1 [KNL, XEN]
+ Default is on (1). Disable the driving of swap pages
+ to the hypervisor.
+
+ tmem.selfshrinking=0|1 [KNL, XEN]
+ Default is on (1). Partial swapoff that immediately
+ transfers pages from Xen hypervisor back to the
+ kernel based on different criteria.
+
topology= [S390]
Format: {off | on}
Specify if the kernel should make use of the cpu
@@ -3330,9 +3351,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
plus one apbt timer for broadcast timer.
x86_mrst_timer=apbt_only | lapic_and_apbt
- xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks.
- xd_geo= See header of drivers/block/xd.c.
-
xen_emul_unplug= [HW,X86,XEN]
Unplug Xen emulated devices
Format: [unplug0,][unplug1]
diff --git a/Documentation/kernel-per-CPU-kthreads.txt b/Documentation/kernel-per-CPU-kthreads.txt
new file mode 100644
index 000000000000..cbf7ae412da4
--- /dev/null
+++ b/Documentation/kernel-per-CPU-kthreads.txt
@@ -0,0 +1,202 @@
+REDUCING OS JITTER DUE TO PER-CPU KTHREADS
+
+This document lists per-CPU kthreads in the Linux kernel and presents
+options to control their OS jitter. Note that non-per-CPU kthreads are
+not listed here. To reduce OS jitter from non-per-CPU kthreads, bind
+them to a "housekeeping" CPU dedicated to such work.
+
+
+REFERENCES
+
+o Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs.
+
+o Documentation/cgroups: Using cgroups to bind tasks to sets of CPUs.
+
+o man taskset: Using the taskset command to bind tasks to sets
+ of CPUs.
+
+o man sched_setaffinity: Using the sched_setaffinity() system
+ call to bind tasks to sets of CPUs.
+
+o /sys/devices/system/cpu/cpuN/online: Control CPU N's hotplug state,
+ writing "0" to offline and "1" to online.
+
+o In order to locate kernel-generated OS jitter on CPU N:
+
+ cd /sys/kernel/debug/tracing
+ echo 1 > max_graph_depth # Increase the "1" for more detail
+ echo function_graph > current_tracer
+ # run workload
+ cat per_cpu/cpuN/trace
+
+
+KTHREADS
+
+Name: ehca_comp/%u
+Purpose: Periodically process Infiniband-related work.
+To reduce its OS jitter, do any of the following:
+1. Don't use eHCA Infiniband hardware, instead choosing hardware
+ that does not require per-CPU kthreads. This will prevent these
+ kthreads from being created in the first place. (This will
+ work for most people, as this hardware, though important, is
+ relatively old and is produced in relatively low unit volumes.)
+2. Do all eHCA-Infiniband-related work on other CPUs, including
+ interrupts.
+3. Rework the eHCA driver so that its per-CPU kthreads are
+ provisioned only on selected CPUs.
+
+
+Name: irq/%d-%s
+Purpose: Handle threaded interrupts.
+To reduce its OS jitter, do the following:
+1. Use irq affinity to force the irq threads to execute on
+ some other CPU.
+
+Name: kcmtpd_ctr_%d
+Purpose: Handle Bluetooth work.
+To reduce its OS jitter, do one of the following:
+1. Don't use Bluetooth, in which case these kthreads won't be
+ created in the first place.
+2. Use irq affinity to force Bluetooth-related interrupts to
+ occur on some other CPU and furthermore initiate all
+ Bluetooth activity on some other CPU.
+
+Name: ksoftirqd/%u
+Purpose: Execute softirq handlers when threaded or when under heavy load.
+To reduce its OS jitter, each softirq vector must be handled
+separately as follows:
+TIMER_SOFTIRQ: Do all of the following:
+1. To the extent possible, keep the CPU out of the kernel when it
+ is non-idle, for example, by avoiding system calls and by forcing
+ both kernel threads and interrupts to execute elsewhere.
+2. Build with CONFIG_HOTPLUG_CPU=y. After boot completes, force
+ the CPU offline, then bring it back online. This forces
+ recurring timers to migrate elsewhere. If you are concerned
+ with multiple CPUs, force them all offline before bringing the
+ first one back online. Once you have onlined the CPUs in question,
+ do not offline any other CPUs, because doing so could force the
+ timer back onto one of the CPUs in question.
+NET_TX_SOFTIRQ and NET_RX_SOFTIRQ: Do all of the following:
+1. Force networking interrupts onto other CPUs.
+2. Initiate any network I/O on other CPUs.
+3. Once your application has started, prevent CPU-hotplug operations
+ from being initiated from tasks that might run on the CPU to
+ be de-jittered. (It is OK to force this CPU offline and then
+ bring it back online before you start your application.)
+BLOCK_SOFTIRQ: Do all of the following:
+1. Force block-device interrupts onto some other CPU.
+2. Initiate any block I/O on other CPUs.
+3. Once your application has started, prevent CPU-hotplug operations
+ from being initiated from tasks that might run on the CPU to
+ be de-jittered. (It is OK to force this CPU offline and then
+ bring it back online before you start your application.)
+BLOCK_IOPOLL_SOFTIRQ: Do all of the following:
+1. Force block-device interrupts onto some other CPU.
+2. Initiate any block I/O and block-I/O polling on other CPUs.
+3. Once your application has started, prevent CPU-hotplug operations
+ from being initiated from tasks that might run on the CPU to
+ be de-jittered. (It is OK to force this CPU offline and then
+ bring it back online before you start your application.)
+TASKLET_SOFTIRQ: Do one or more of the following:
+1. Avoid use of drivers that use tasklets. (Such drivers will contain
+ calls to things like tasklet_schedule().)
+2. Convert all drivers that you must use from tasklets to workqueues.
+3. Force interrupts for drivers using tasklets onto other CPUs,
+ and also do I/O involving these drivers on other CPUs.
+SCHED_SOFTIRQ: Do all of the following:
+1. Avoid sending scheduler IPIs to the CPU to be de-jittered,
+ for example, ensure that at most one runnable kthread is present
+ on that CPU. If a thread that expects to run on the de-jittered
+ CPU awakens, the scheduler will send an IPI that can result in
+ a subsequent SCHED_SOFTIRQ.
+2. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y,
+ CONFIG_NO_HZ_FULL=y, and, in addition, ensure that the CPU
+ to be de-jittered is marked as an adaptive-ticks CPU using the
+ "nohz_full=" boot parameter. This reduces the number of
+ scheduler-clock interrupts that the de-jittered CPU receives,
+ minimizing its chances of being selected to do the load balancing
+ work that runs in SCHED_SOFTIRQ context.
+3. To the extent possible, keep the CPU out of the kernel when it
+ is non-idle, for example, by avoiding system calls and by
+ forcing both kernel threads and interrupts to execute elsewhere.
+ This further reduces the number of scheduler-clock interrupts
+ received by the de-jittered CPU.
+HRTIMER_SOFTIRQ: Do all of the following:
+1. To the extent possible, keep the CPU out of the kernel when it
+ is non-idle. For example, avoid system calls and force both
+ kernel threads and interrupts to execute elsewhere.
+2. Build with CONFIG_HOTPLUG_CPU=y. Once boot completes, force the
+ CPU offline, then bring it back online. This forces recurring
+ timers to migrate elsewhere. If you are concerned with multiple
+ CPUs, force them all offline before bringing the first one
+ back online. Once you have onlined the CPUs in question, do not
+ offline any other CPUs, because doing so could force the timer
+ back onto one of the CPUs in question.
+RCU_SOFTIRQ: Do at least one of the following:
+1. Offload callbacks and keep the CPU in either dyntick-idle or
+ adaptive-ticks state by doing all of the following:
+ a. Build with CONFIG_RCU_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_ALL=y,
+ CONFIG_NO_HZ_FULL=y, and, in addition ensure that the CPU
+ to be de-jittered is marked as an adaptive-ticks CPU using
+ the "nohz_full=" boot parameter. Bind the rcuo kthreads
+ to housekeeping CPUs, which can tolerate OS jitter.
+ b. To the extent possible, keep the CPU out of the kernel
+ when it is non-idle, for example, by avoiding system
+ calls and by forcing both kernel threads and interrupts
+ to execute elsewhere.
+2. Enable RCU to do its processing remotely via dyntick-idle by
+ doing all of the following:
+ a. Build with CONFIG_NO_HZ=y and CONFIG_RCU_FAST_NO_HZ=y.
+ b. Ensure that the CPU goes idle frequently, allowing other
+ CPUs to detect that it has passed through an RCU quiescent
+ state. If the kernel is built with CONFIG_NO_HZ_FULL=y,
+ userspace execution also allows other CPUs to detect that
+ the CPU in question has passed through a quiescent state.
+ c. To the extent possible, keep the CPU out of the kernel
+ when it is non-idle, for example, by avoiding system
+ calls and by forcing both kernel threads and interrupts
+ to execute elsewhere.
+
+Name: rcuc/%u
+Purpose: Execute RCU callbacks in CONFIG_RCU_BOOST=y kernels.
+To reduce its OS jitter, do at least one of the following:
+1. Build the kernel with CONFIG_PREEMPT=n. This prevents these
+ kthreads from being created in the first place, and also obviates
+ the need for RCU priority boosting. This approach is feasible
+ for workloads that do not require high degrees of responsiveness.
+2. Build the kernel with CONFIG_RCU_BOOST=n. This prevents these
+ kthreads from being created in the first place. This approach
+ is feasible only if your workload never requires RCU priority
+ boosting, for example, if you ensure frequent idle time on all
+ CPUs that might execute within the kernel.
+3. Build with CONFIG_RCU_NOCB_CPU=y and CONFIG_RCU_NOCB_CPU_ALL=y,
+ which offloads all RCU callbacks to kthreads that can be moved
+ off of CPUs susceptible to OS jitter. This approach prevents the
+ rcuc/%u kthreads from having any work to do, so that they are
+ never awakened.
+4. Ensure that the CPU never enters the kernel, and, in particular,
+ avoid initiating any CPU hotplug operations on this CPU. This is
+ another way of preventing any callbacks from being queued on the
+ CPU, again preventing the rcuc/%u kthreads from having any work
+ to do.
+
+Name: rcuob/%d, rcuop/%d, and rcuos/%d
+Purpose: Offload RCU callbacks from the corresponding CPU.
+To reduce its OS jitter, do at least one of the following:
+1. Use affinity, cgroups, or other mechanism to force these kthreads
+ to execute on some other CPU.
+2. Build with CONFIG_RCU_NOCB_CPUS=n, which will prevent these
+ kthreads from being created in the first place. However, please
+ note that this will not eliminate OS jitter, but will instead
+ shift it to RCU_SOFTIRQ.
+
+Name: watchdog/%u
+Purpose: Detect software lockups on each CPU.
+To reduce its OS jitter, do at least one of the following:
+1. Build with CONFIG_LOCKUP_DETECTOR=n, which will prevent these
+ kthreads from being created in the first place.
+2. Echo a zero to /proc/sys/kernel/watchdog to disable the
+ watchdog timer.
+3. Echo a large number of /proc/sys/kernel/watchdog_thresh in
+ order to reduce the frequency of OS jitter due to the watchdog
+ timer down to a level that is acceptable for your workload.
diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt
index 97d45f276fe6..eaf32a1fd0b1 100644
--- a/Documentation/m68k/kernel-options.txt
+++ b/Documentation/m68k/kernel-options.txt
@@ -80,8 +80,6 @@ Valid names are:
/dev/sdd: -> 0x0830 (forth SCSI disk)
/dev/sde: -> 0x0840 (fifth SCSI disk)
/dev/fd : -> 0x0200 (floppy disk)
- /dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k)
- /dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k)
The name must be followed by a decimal number, that stands for the
partition number. Internally, the value of the number is just
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index f98ca633b528..3458d6343e01 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -420,10 +420,10 @@ tcp_synack_retries - INTEGER
for a passive TCP connection will happen after 63seconds.
tcp_syncookies - BOOLEAN
- Only valid when the kernel was compiled with CONFIG_SYNCOOKIES
+ Only valid when the kernel was compiled with CONFIG_SYN_COOKIES
Send out syncookies when the syn backlog queue of a socket
overflows. This is to prevent against the common 'SYN flood attack'
- Default: FALSE
+ Default: 1
Note, that syncookies is fallback facility.
It MUST NOT be used to help highly loaded servers to stand
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 504dfe4d52eb..a66c9821b5ce 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -268,7 +268,7 @@ situations.
System Power Management Phases
------------------------------
Suspending or resuming the system is done in several phases. Different phases
-are used for standby or memory sleep states ("suspend-to-RAM") and the
+are used for freeze, standby, and memory sleep states ("suspend-to-RAM") and the
hibernation state ("suspend-to-disk"). Each phase involves executing callbacks
for every device before the next phase begins. Not all busses or classes
support all these callbacks and not all drivers use all the callbacks. The
@@ -309,7 +309,8 @@ execute the corresponding method from dev->driver->pm instead if there is one.
Entering System Suspend
-----------------------
-When the system goes into the standby or memory sleep state, the phases are:
+When the system goes into the freeze, standby or memory sleep state,
+the phases are:
prepare, suspend, suspend_late, suspend_noirq.
@@ -368,7 +369,7 @@ the devices that were suspended.
Leaving System Suspend
----------------------
-When resuming from standby or memory sleep, the phases are:
+When resuming from freeze, standby or memory sleep, the phases are:
resume_noirq, resume_early, resume, complete.
@@ -433,8 +434,8 @@ the system log.
Entering Hibernation
--------------------
-Hibernating the system is more complicated than putting it into the standby or
-memory sleep state, because it involves creating and saving a system image.
+Hibernating the system is more complicated than putting it into the other
+sleep states, because it involves creating and saving a system image.
Therefore there are more phases for hibernation, with a different set of
callbacks. These phases always run after tasks have been frozen and memory has
been freed.
@@ -485,8 +486,8 @@ image forms an atomic snapshot of the system state.
At this point the system image is saved, and the devices then need to be
prepared for the upcoming system shutdown. This is much like suspending them
-before putting the system into the standby or memory sleep state, and the phases
-are similar.
+before putting the system into the freeze, standby or memory sleep state,
+and the phases are similar.
9. The prepare phase is discussed above.
diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt
index c537834af005..f1f0f59a7c47 100644
--- a/Documentation/power/interface.txt
+++ b/Documentation/power/interface.txt
@@ -7,8 +7,8 @@ running. The interface exists in /sys/power/ directory (assuming sysfs
is mounted at /sys).
/sys/power/state controls system power state. Reading from this file
-returns what states are supported, which is hard-coded to 'standby'
-(Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk'
+returns what states are supported, which is hard-coded to 'freeze',
+'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk'
(Suspend-to-Disk).
Writing to this file one of those strings causes the system to
diff --git a/Documentation/power/notifiers.txt b/Documentation/power/notifiers.txt
index c2a4a346c0d9..a81fa254303d 100644
--- a/Documentation/power/notifiers.txt
+++ b/Documentation/power/notifiers.txt
@@ -15,8 +15,10 @@ A suspend/hibernation notifier may be used for this purpose.
The subsystems or drivers having such needs can register suspend notifiers that
will be called upon the following events by the PM core:
-PM_HIBERNATION_PREPARE The system is going to hibernate or suspend, tasks will
- be frozen immediately.
+PM_HIBERNATION_PREPARE The system is going to hibernate, tasks will be frozen
+ immediately. This is different from PM_SUSPEND_PREPARE
+ below because here we do additional work between notifiers
+ and drivers freezing.
PM_POST_HIBERNATION The system memory state has been restored from a
hibernation image or an error occurred during
diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt
index 4416b28630df..442d43df9b25 100644
--- a/Documentation/power/states.txt
+++ b/Documentation/power/states.txt
@@ -2,12 +2,26 @@
System Power Management States
-The kernel supports three power management states generically, though
-each is dependent on platform support code to implement the low-level
-details for each state. This file describes each state, what they are
+The kernel supports four power management states generically, though
+one is generic and the other three are dependent on platform support
+code to implement the low-level details for each state.
+This file describes each state, what they are
commonly called, what ACPI state they map to, and what string to write
to /sys/power/state to enter that state
+state: Freeze / Low-Power Idle
+ACPI state: S0
+String: "freeze"
+
+This state is a generic, pure software, light-weight, low-power state.
+It allows more energy to be saved relative to idle by freezing user
+space and putting all I/O devices into low-power states (possibly
+lower-power than available at run time), such that the processors can
+spend more time in their idle states.
+This state can be used for platforms without Standby/Suspend-to-RAM
+support, or it can be used in addition to Suspend-to-RAM (memory sleep)
+to provide reduced resume latency.
+
State: Standby / Power-On Suspend
ACPI State: S1
@@ -22,9 +36,6 @@ We try to put devices in a low-power state equivalent to D1, which
also offers low power savings, but low resume latency. Not all devices
support D1, and those that don't are left on.
-A transition from Standby to the On state should take about 1-2
-seconds.
-
State: Suspend-to-RAM
ACPI State: S3
@@ -42,9 +53,6 @@ transition back to the On state.
For at least ACPI, STR requires some minimal boot-strapping code to
resume the system from STR. This may be true on other platforms.
-A transition from Suspend-to-RAM to the On state should take about
-3-5 seconds.
-
State: Suspend-to-disk
ACPI State: S4
@@ -74,7 +82,3 @@ low-power state (like ACPI S4), or it may simply power down. Powering
down offers greater savings, and allows this mechanism to work on any
system. However, entering a real low-power state allows the user to
trigger wake up events (e.g. pressing a key or opening a laptop lid).
-
-A transition from Suspend-to-Disk to the On state should take about 30
-seconds, though it's typically a bit more with the current
-implementation.
diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt
index c907be41d60f..dc23e58ae264 100644
--- a/Documentation/powerpc/transactional_memory.txt
+++ b/Documentation/powerpc/transactional_memory.txt
@@ -147,6 +147,25 @@ Example signal handler:
fix_the_problem(ucp->dar);
}
+When in an active transaction that takes a signal, we need to be careful with
+the stack. It's possible that the stack has moved back up after the tbegin.
+The obvious case here is when the tbegin is called inside a function that
+returns before a tend. In this case, the stack is part of the checkpointed
+transactional memory state. If we write over this non transactionally or in
+suspend, we are in trouble because if we get a tm abort, the program counter and
+stack pointer will be back at the tbegin but our in memory stack won't be valid
+anymore.
+
+To avoid this, when taking a signal in an active transaction, we need to use
+the stack pointer from the checkpointed state, rather than the speculated
+state. This ensures that the signal context (written tm suspended) will be
+written below the stack required for the rollback. The transaction is aborted
+becuase of the treclaim, so any memory written between the tbegin and the
+signal will be rolled back anyway.
+
+For signals taken in non-TM or suspended mode, we use the
+normal/non-checkpointed stack pointer.
+
Failure cause codes used by kernel
==================================
@@ -155,14 +174,18 @@ These are defined in , and distinguish different reasons why the
kernel aborted a transaction:
TM_CAUSE_RESCHED Thread was rescheduled.
+ TM_CAUSE_TLBI Software TLB invalide.
TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap.
TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort
transactions for consistency will use this.
TM_CAUSE_SIGNAL Signal delivered.
TM_CAUSE_MISC Currently unused.
+ TM_CAUSE_ALIGNMENT Alignment fault.
+ TM_CAUSE_EMULATE Emulation that touched memory.
-These can be checked by the user program's abort handler as TEXASR[0:7].
-
+These can be checked by the user program's abort handler as TEXASR[0:7]. If
+bit 7 is set, it indicates that the error is consider persistent. For example
+a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q
GDB
===
diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt
index c75694b35d08..a9c16c979da2 100644
--- a/Documentation/rapidio/rapidio.txt
+++ b/Documentation/rapidio/rapidio.txt
@@ -79,20 +79,63 @@ master port that is used to communicate with devices within the network.
In order to initialize the RapidIO subsystem, a platform must initialize and
register at least one master port within the RapidIO network. To register mport
within the subsystem controller driver initialization code calls function
-rio_register_mport() for each available master port. After all active master
-ports are registered with a RapidIO subsystem, the rio_init_mports() routine
-is called to perform enumeration and discovery.
+rio_register_mport() for each available master port.
-In the current PowerPC-based implementation a subsys_initcall() is specified to
-perform controller initialization and mport registration. At the end it directly
-calls rio_init_mports() to execute RapidIO enumeration and discovery.
+RapidIO subsystem uses subsys_initcall() or device_initcall() to perform
+controller initialization (depending on controller device type).
+
+After all active master ports are registered with a RapidIO subsystem,
+an enumeration and/or discovery routine may be called automatically or
+by user-space command.
4. Enumeration and Discovery
----------------------------
-When rio_init_mports() is called it scans a list of registered master ports and
-calls an enumeration or discovery routine depending on the configured role of a
-master port: host or agent.
+4.1 Overview
+------------
+
+RapidIO subsystem configuration options allow users to specify enumeration and
+discovery methods as statically linked components or loadable modules.
+An enumeration/discovery method implementation and available input parameters
+define how any given method can be attached to available RapidIO mports:
+simply to all available mports OR individually to the specified mport device.
+
+Depending on selected enumeration/discovery build configuration, there are
+several methods to initiate an enumeration and/or discovery process:
+
+ (a) Statically linked enumeration and discovery process can be started
+ automatically during kernel initialization time using corresponding module
+ parameters. This was the original method used since introduction of RapidIO
+ subsystem. Now this method relies on enumerator module parameter which is
+ 'rio-scan.scan' for existing basic enumeration/discovery method.
+ When automatic start of enumeration/discovery is used a user has to ensure
+ that all discovering endpoints are started before the enumerating endpoint
+ and are waiting for enumeration to be completed.
+ Configuration option CONFIG_RAPIDIO_DISC_TIMEOUT defines time that discovering
+ endpoint waits for enumeration to be completed. If the specified timeout
+ expires the discovery process is terminated without obtaining RapidIO network
+ information. NOTE: a timed out discovery process may be restarted later using
+ a user-space command as it is described later if the given endpoint was
+ enumerated successfully.
+
+ (b) Statically linked enumeration and discovery process can be started by
+ a command from user space. This initiation method provides more flexibility
+ for a system startup compared to the option (a) above. After all participating
+ endpoints have been successfully booted, an enumeration process shall be
+ started first by issuing a user-space command, after an enumeration is
+ completed a discovery process can be started on all remaining endpoints.
+
+ (c) Modular enumeration and discovery process can be started by a command from
+ user space. After an enumeration/discovery module is loaded, a network scan
+ process can be started by issuing a user-space command.
+ Similar to the option (b) above, an enumerator has to be started first.
+
+ (d) Modular enumeration and discovery process can be started by a module
+ initialization routine. In this case an enumerating module shall be loaded
+ first.
+
+When a network scan process is started it calls an enumeration or discovery
+routine depending on the configured role of a master port: host or agent.
Enumeration is performed by a master port if it is configured as a host port by
assigning a host device ID greater than or equal to zero. A host device ID is
@@ -104,8 +147,58 @@ for it.
The enumeration and discovery routines use RapidIO maintenance transactions
to access the configuration space of devices.
-The enumeration process is implemented according to the enumeration algorithm
-outlined in the RapidIO Interconnect Specification: Annex I [1].
+4.2 Automatic Start of Enumeration and Discovery
+------------------------------------------------
+
+Automatic enumeration/discovery start method is applicable only to built-in
+enumeration/discovery RapidIO configuration selection. To enable automatic
+enumeration/discovery start by existing basic enumerator method set use boot
+command line parameter "rio-scan.scan=1".
+
+This configuration requires synchronized start of all RapidIO endpoints that
+form a network which will be enumerated/discovered. Discovering endpoints have
+to be started before an enumeration starts to ensure that all RapidIO
+controllers have been initialized and are ready to be discovered. Configuration
+parameter CONFIG_RAPIDIO_DISC_TIMEOUT defines time (in seconds) which
+a discovering endpoint will wait for enumeration to be completed.
+
+When automatic enumeration/discovery start is selected, basic method's
+initialization routine calls rio_init_mports() to perform enumeration or
+discovery for all known mport devices.
+
+Depending on RapidIO network size and configuration this automatic
+enumeration/discovery start method may be difficult to use due to the
+requirement for synchronized start of all endpoints.
+
+4.3 User-space Start of Enumeration and Discovery
+-------------------------------------------------
+
+User-space start of enumeration and discovery can be used with built-in and
+modular build configurations. For user-space controlled start RapidIO subsystem
+creates the sysfs write-only attribute file '/sys/bus/rapidio/scan'. To initiate
+an enumeration or discovery process on specific mport device, a user needs to
+write mport_ID (not RapidIO destination ID) into that file. The mport_ID is a
+sequential number (0 ... RIO_MAX_MPORTS) assigned during mport device
+registration. For example for machine with single RapidIO controller, mport_ID
+for that controller always will be 0.
+
+To initiate RapidIO enumeration/discovery on all available mports a user may
+write '-1' (or RIO_MPORT_ANY) into the scan attribute file.
+
+4.4 Basic Enumeration Method
+----------------------------
+
+This is an original enumeration/discovery method which is available since
+first release of RapidIO subsystem code. The enumeration process is
+implemented according to the enumeration algorithm outlined in the RapidIO
+Interconnect Specification: Annex I [1].
+
+This method can be configured as statically linked or loadable module.
+The method's single parameter "scan" allows to trigger the enumeration/discovery
+process from module initialization routine.
+
+This enumeration/discovery method can be started only once and does not support
+unloading if it is built as a module.
The enumeration process traverses the network using a recursive depth-first
algorithm. When a new device is found, the enumerator takes ownership of that
@@ -160,6 +253,19 @@ time period. If this wait time period expires before enumeration is completed,
an agent skips RapidIO discovery and continues with remaining kernel
initialization.
+4.5 Adding New Enumeration/Discovery Method
+-------------------------------------------
+
+RapidIO subsystem code organization allows addition of new enumeration/discovery
+methods as new configuration options without significant impact to to the core
+RapidIO code.
+
+A new enumeration/discovery method has to be attached to one or more mport
+devices before an enumeration/discovery process can be started. Normally,
+method's module initialization routine calls rio_register_scan() to attach
+an enumerator to a specified mport device (or devices). The basic enumerator
+implementation demonstrates this process.
+
5. References
-------------
diff --git a/Documentation/rapidio/sysfs.txt b/Documentation/rapidio/sysfs.txt
index 97f71ce575d6..19878179da4c 100644
--- a/Documentation/rapidio/sysfs.txt
+++ b/Documentation/rapidio/sysfs.txt
@@ -88,3 +88,20 @@ that exports additional attributes.
IDT_GEN2:
errlog - reads contents of device error log until it is empty.
+
+
+5. RapidIO Bus Attributes
+-------------------------
+
+RapidIO bus subdirectory /sys/bus/rapidio implements the following bus-specific
+attribute:
+
+ scan - allows to trigger enumeration discovery process from user space. This
+ is a write-only attribute. To initiate an enumeration or discovery
+ process on specific mport device, a user needs to write mport_ID (not
+ RapidIO destination ID) into this file. The mport_ID is a sequential
+ number (0 ... RIO_MAX_MPORTS) assigned to the mport device.
+ For example, for a machine with a single RapidIO controller, mport_ID
+ for that controller always will be 0.
+ To initiate RapidIO enumeration/discovery on all available mports
+ a user must write '-1' (or RIO_MPORT_ANY) into this attribute file.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index bb8b0dc532b8..77d68e23b247 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -29,6 +29,8 @@ ALC269/270/275/276/280/282
alc271-dmic Enable ALC271X digital mic workaround
inv-dmic Inverted internal mic workaround
lenovo-dock Enables docking station I/O for some Lenovos
+ dell-headset-multi Headset jack, which can also be used as mic-in
+ dell-headset-dock Headset jack (without mic-in), and also dock I/O
ALC662/663/272
==============
@@ -42,6 +44,7 @@ ALC662/663/272
asus-mode7 ASUS
asus-mode8 ASUS
inv-dmic Inverted internal mic workaround
+ dell-headset-multi Headset jack, which can also be used as mic-in
ALC680
======
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d7782b9f90d..ad7e322ad17b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2890,8 +2890,8 @@ F: drivers/media/dvb-frontends/ec100*
ECRYPT FILE SYSTEM
M: Tyler Hicks
-M: Dustin Kirkland
L: ecryptfs@vger.kernel.org
+W: http://ecryptfs.org
W: https://launchpad.net/ecryptfs
S: Supported
F: Documentation/filesystems/ecryptfs.txt
@@ -3220,7 +3220,7 @@ F: lib/fault-inject.c
FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
M: Robert Love
-L: devel@open-fcoe.org
+L: fcoe-devel@open-fcoe.org
W: www.Open-FCoE.org
S: Supported
F: drivers/scsi/libfc/
@@ -3322,11 +3322,12 @@ F: drivers/net/wan/dlci.c
F: drivers/net/wan/sdla.c
FRAMEBUFFER LAYER
-M: Florian Tobias Schandinat
+M: Jean-Christophe Plagniol-Villard
+M: Tomi Valkeinen
L: linux-fbdev@vger.kernel.org
W: http://linux-fbdev.sourceforge.net/
Q: http://patchwork.kernel.org/project/linux-fbdev/list/
-T: git git://github.com/schandinat/linux-2.6.git fbdev-next
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git
S: Maintained
F: Documentation/fb/
F: Documentation/devicetree/bindings/fb/
@@ -3865,9 +3866,16 @@ M: K. Y. Srinivasan
M: Haiyang Zhang
L: devel@linuxdriverproject.org
S: Maintained
-F: drivers/hv/
+F: arch/x86/include/asm/mshyperv.h
+F: arch/x86/include/uapi/asm/hyperv.h
+F: arch/x86/kernel/cpu/mshyperv.c
F: drivers/hid/hid-hyperv.c
+F: drivers/hv/
F: drivers/net/hyperv/
+F: drivers/scsi/storvsc_drv.c
+F: drivers/video/hyperv_fb.c
+F: include/linux/hyperv.h
+F: tools/hv/
I2C OVER PARALLEL PORT
M: Jean Delvare
@@ -4440,6 +4448,16 @@ S: Maintained
F: drivers/scsi/*iscsi*
F: include/scsi/*iscsi*
+ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
+M: Or Gerlitz
+M: Roi Dayan
+L: linux-rdma@vger.kernel.org
+S: Supported
+W: http://www.openfabrics.org
+W: www.open-iscsi.org
+Q: http://patchwork.kernel.org/project/linux-rdma/list/
+F: drivers/infiniband/ulp/iser
+
ISDN SUBSYSTEM
M: Karsten Keil
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
@@ -4641,12 +4659,13 @@ F: include/linux/sunrpc/
F: include/uapi/linux/sunrpc/
KERNEL VIRTUAL MACHINE (KVM)
-M: Marcelo Tosatti
M: Gleb Natapov
+M: Paolo Bonzini
L: kvm@vger.kernel.org
-W: http://kvm.qumranet.com
+W: http://linux-kvm.org
S: Supported
-F: Documentation/*/kvm.txt
+F: Documentation/*/kvm*.txt
+F: Documentation/virtual/kvm/
F: arch/*/kvm/
F: arch/*/include/asm/kvm*
F: include/linux/kvm*
@@ -4976,6 +4995,13 @@ S: Maintained
F: Documentation/hwmon/lm90
F: drivers/hwmon/lm90.c
+LM95234 HARDWARE MONITOR DRIVER
+M: Guenter Roeck
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/lm95234
+F: drivers/hwmon/lm95234.c
+
LME2510 MEDIA DRIVER
M: Malcolm Priestley
L: linux-media@vger.kernel.org
@@ -5509,18 +5535,18 @@ F: Documentation/networking/s2io.txt
F: Documentation/networking/vxge.txt
F: drivers/net/ethernet/neterion/
-NETFILTER/IPTABLES/IPCHAINS
-P: Harald Welte
-P: Jozsef Kadlecsik
+NETFILTER/IPTABLES
M: Pablo Neira Ayuso
M: Patrick McHardy
+M: Jozsef Kadlecsik
L: netfilter-devel@vger.kernel.org
L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git git://1984.lsi.us.es/nf
-T: git git://1984.lsi.us.es/nf-next
+Q: http://patchwork.ozlabs.org/project/netfilter-devel/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
@@ -5740,7 +5766,7 @@ M: Matthew Wilcox
L: linux-nvme@lists.infradead.org
T: git git://git.infradead.org/users/willy/linux-nvme.git
S: Supported
-F: drivers/block/nvme.c
+F: drivers/block/nvme*
F: include/linux/nvme.h
OMAP SUPPORT
@@ -6069,9 +6095,18 @@ L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
Q: http://patchwork.kernel.org/project/linux-parisc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git
S: Maintained
F: arch/parisc/
+F: Documentation/parisc/
F: drivers/parisc/
+F: drivers/char/agp/parisc-agp.c
+F: drivers/input/serio/gscps2.c
+F: drivers/parport/parport_gsc.*
+F: drivers/tty/serial/8250/8250_gsc.c
+F: drivers/video/sti*
+F: drivers/video/console/sti*
+F: drivers/video/logo/logo_parisc*
PC87360 HARDWARE MONITORING DRIVER
M: Jim Cromie
@@ -7589,7 +7624,7 @@ F: drivers/clk/spear/
SPI SUBSYSTEM
M: Mark Brown
M: Grant Likely
-L: spi-devel-general@lists.sourceforge.net
+L: linux-spi@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
S: Maintained
@@ -7854,7 +7889,7 @@ L: linux-scsi@vger.kernel.org
L: target-devel@vger.kernel.org
L: http://groups.google.com/group/linux-iscsi-target-dev
W: http://www.linux-iscsi.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-core.git master
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
S: Supported
F: drivers/target/
F: include/target/
@@ -8182,6 +8217,13 @@ F: drivers/mmc/host/sh_mobile_sdhi.c
F: include/linux/mmc/tmio.h
F: include/linux/mmc/sh_mobile_sdhi.h
+TMP401 HARDWARE MONITOR DRIVER
+M: Guenter Roeck
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/tmp401
+F: drivers/hwmon/tmp401.c
+
TMPFS (SHMEM FILESYSTEM)
M: Hugh Dickins
L: linux-mm@kvack.org
@@ -8962,7 +9004,7 @@ S: Maintained
F: drivers/net/wireless/wl3501*
WM97XX TOUCHSCREEN DRIVERS
-M: Mark Brown
+M: Mark Brown
M: Liam Girdwood
L: linux-input@vger.kernel.org
T: git git://opensource.wolfsonmicro.com/linux-2.6-touch
@@ -8972,7 +9014,6 @@ F: drivers/input/touchscreen/*wm97*
F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS DRIVERS
-M: Mark Brown
L: patches@opensource.wolfsonmicro.com
T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
diff --git a/Makefile b/Makefile
index cd11e8857604..e5e3ba085191 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 10
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION =
NAME = Unicycling Gorilla
# *DOCUMENTATION*
diff --git a/arch/Kconfig b/arch/Kconfig
index dd0e8eb8042f..a4429bcd609e 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -213,6 +213,9 @@ config USE_GENERIC_SMP_HELPERS
config GENERIC_SMP_IDLE_THREAD
bool
+config GENERIC_IDLE_POLL_SETUP
+ bool
+
# Select if arch init_task initializer is different to init/init_task.c
config ARCH_INIT_TASK
bool
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
index c0fd3623c393..0fa0d4abe795 100644
--- a/arch/arc/boot/dts/abilis_tb100_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -37,7 +37,7 @@
soc100 {
uart@FF100000 {
- pinctrl-names = "abilis,simple-default";
+ pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
ethernet@FE100000 {
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
index 6f8c381f6268..a4d80ce283ae 100644
--- a/arch/arc/boot/dts/abilis_tb101_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -37,7 +37,7 @@
soc100 {
uart@FF100000 {
- pinctrl-names = "abilis,simple-default";
+ pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
ethernet@FE100000 {
diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi
index a6139fc5aaa3..b97e3051ba4b 100644
--- a/arch/arc/boot/dts/abilis_tb10x.dtsi
+++ b/arch/arc/boot/dts/abilis_tb10x.dtsi
@@ -88,8 +88,7 @@
};
uart@FF100000 {
- compatible = "snps,dw-apb-uart",
- "abilis,simple-pinctrl";
+ compatible = "snps,dw-apb-uart";
reg = <0xFF100000 0x100>;
clock-frequency = <166666666>;
interrupts = <25 1>;
@@ -184,8 +183,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
- compatible = "abilis,tb100-spi",
- "abilis,simple-pinctrl";
+ compatible = "abilis,tb100-spi";
num-cs = <2>;
reg = <0xFE011000 0x20>;
interrupt-parent = <&tb10x_ictl>;
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
index 9f841af41092..ef62682e8d95 100644
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@@ -93,14 +93,16 @@ static inline int cache_is_vipt_aliasing(void)
#endif
}
-#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 3)
+#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 1)
/*
* checks if two addresses (after page aligning) index into same cache set
*/
#define addr_not_cache_congruent(addr1, addr2) \
+({ \
cache_is_vipt_aliasing() ? \
- (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0 \
+ (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0; \
+})
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
do { \
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 374a35514116..ab84bf131fe1 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -19,13 +19,6 @@
#define clear_page(paddr) memset((paddr), 0, PAGE_SIZE)
#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
-#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
-
-#define clear_user_page(addr, vaddr, pg) clear_page(addr)
-#define copy_user_page(vto, vfrom, vaddr, pg) copy_page(vto, vfrom)
-
-#else /* VIPT aliasing dcache */
-
struct vm_area_struct;
struct page;
@@ -35,8 +28,6 @@ void copy_user_highpage(struct page *to, struct page *from,
unsigned long u_vaddr, struct vm_area_struct *vma);
void clear_user_page(void *to, unsigned long u_vaddr, struct page *page);
-#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */
-
#undef STRICT_MM_TYPECHECKS
#ifdef STRICT_MM_TYPECHECKS
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 1cc4720faccb..95b1522212a7 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -57,9 +57,9 @@
#define _PAGE_ACCESSED (1<<1) /* Page is accessed (S) */
#define _PAGE_CACHEABLE (1<<2) /* Page is cached (H) */
-#define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */
-#define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */
-#define _PAGE_READ (1<<5) /* Page has user read perm (H) */
+#define _PAGE_U_EXECUTE (1<<3) /* Page has user execute perm (H) */
+#define _PAGE_U_WRITE (1<<4) /* Page has user write perm (H) */
+#define _PAGE_U_READ (1<<5) /* Page has user read perm (H) */
#define _PAGE_K_EXECUTE (1<<6) /* Page has kernel execute perm (H) */
#define _PAGE_K_WRITE (1<<7) /* Page has kernel write perm (H) */
#define _PAGE_K_READ (1<<8) /* Page has kernel perm (H) */
@@ -72,9 +72,9 @@
/* PD1 */
#define _PAGE_CACHEABLE (1<<0) /* Page is cached (H) */
-#define _PAGE_EXECUTE (1<<1) /* Page has user execute perm (H) */
-#define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */
-#define _PAGE_READ (1<<3) /* Page has user read perm (H) */
+#define _PAGE_U_EXECUTE (1<<1) /* Page has user execute perm (H) */
+#define _PAGE_U_WRITE (1<<2) /* Page has user write perm (H) */
+#define _PAGE_U_READ (1<<3) /* Page has user read perm (H) */
#define _PAGE_K_EXECUTE (1<<4) /* Page has kernel execute perm (H) */
#define _PAGE_K_WRITE (1<<5) /* Page has kernel write perm (H) */
#define _PAGE_K_READ (1<<6) /* Page has kernel perm (H) */
@@ -93,7 +93,8 @@
#endif
/* Kernel allowed all permissions for all pages */
-#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
+#define _K_PAGE_PERMS (_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ | \
+ _PAGE_GLOBAL | _PAGE_PRESENT)
#ifdef CONFIG_ARC_CACHE_PAGES
#define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE
@@ -106,7 +107,11 @@
* -by default cached, unless config otherwise
* -present in memory
*/
-#define ___DEF (_PAGE_PRESENT | _K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
+#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE)
+
+#define _PAGE_READ (_PAGE_U_READ | _PAGE_K_READ)
+#define _PAGE_WRITE (_PAGE_U_WRITE | _PAGE_K_WRITE)
+#define _PAGE_EXECUTE (_PAGE_U_EXECUTE | _PAGE_K_EXECUTE)
/* Set of bits not changed in pte_modify */
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED)
@@ -125,11 +130,10 @@
* kernel vaddr space - visible in all addr spaces, but kernel mode only
* Thus Global, all-kernel-access, no-user-access, cached
*/
-#define PAGE_KERNEL __pgprot(___DEF | _PAGE_GLOBAL)
+#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE)
/* ioremap */
-#define PAGE_KERNEL_NO_CACHE __pgprot(_PAGE_PRESENT | _K_PAGE_PERMS | \
- _PAGE_GLOBAL)
+#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
/**************************************************************************
* Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h
index 85b6df839bd7..cb0c708ca665 100644
--- a/arch/arc/include/asm/tlb.h
+++ b/arch/arc/include/asm/tlb.h
@@ -16,7 +16,7 @@
/* Masks for actual TLB "PD"s */
#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT)
#define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \
- _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
+ _PAGE_U_EXECUTE | _PAGE_U_WRITE | _PAGE_U_READ | \
_PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ)
#ifndef __ASSEMBLY__
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 2f12bca8aef3..aedce1905441 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -610,7 +610,7 @@ void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
local_irq_save(flags);
__ic_line_inv_vaddr(paddr, vaddr, len);
- __dc_line_op(paddr, vaddr, len, OP_FLUSH);
+ __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
local_irq_restore(flags);
}
@@ -676,6 +676,17 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
flush_cache_all();
}
+void flush_anon_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long u_vaddr)
+{
+ /* TBD: do we really need to clear the kernel mapping */
+ __flush_dcache_page(page_address(page), u_vaddr);
+ __flush_dcache_page(page_address(page), page_address(page));
+
+}
+
+#endif
+
void copy_user_highpage(struct page *to, struct page *from,
unsigned long u_vaddr, struct vm_area_struct *vma)
{
@@ -725,16 +736,6 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
set_bit(PG_arch_1, &page->flags);
}
-void flush_anon_page(struct vm_area_struct *vma, struct page *page,
- unsigned long u_vaddr)
-{
- /* TBD: do we really need to clear the kernel mapping */
- __flush_dcache_page(page_address(page), u_vaddr);
- __flush_dcache_page(page_address(page), page_address(page));
-
-}
-
-#endif
/**********************************************************************
* Explicit Cache flush request from user space via syscall
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 066145b5f348..fe1c5a073afe 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -444,7 +444,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
* so userspace sees the right data.
* (Avoids the flush for Non-exec + congruent mapping case)
*/
- if (vma->vm_flags & VM_EXEC || addr_not_cache_congruent(paddr, vaddr)) {
+ if ((vma->vm_flags & VM_EXEC) ||
+ addr_not_cache_congruent(paddr, vaddr)) {
struct page *page = pfn_to_page(pte_pfn(*ptep));
int dirty = test_and_clear_bit(PG_arch_1, &page->flags);
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index 9df765dc7c3a..3357d26ffe54 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -277,7 +277,7 @@ ARC_ENTRY EV_TLBMissI
;----------------------------------------------------------------
; VERIFY_PTE: Check if PTE permissions approp for executing code
cmp_s r2, VMALLOC_START
- mov.lo r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE)
+ mov.lo r2, (_PAGE_PRESENT | _PAGE_U_READ | _PAGE_U_EXECUTE)
mov.hs r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE)
and r3, r0, r2 ; Mask out NON Flag bits from PTE
@@ -320,9 +320,9 @@ ARC_ENTRY EV_TLBMissD
mov_s r2, 0
lr r3, [ecr]
btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access
- or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE
+ or.nz r2, r2, _PAGE_U_READ ; chk for Read flag in PTE
btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access
- or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE
+ or.nz r2, r2, _PAGE_U_WRITE ; chk for Write flag in PTE
; Above laddering takes care of XCHG access
; which is both Read and Write
diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c
index d3567691c7e1..06cb30929460 100644
--- a/arch/arc/plat-tb10x/tb10x.c
+++ b/arch/arc/plat-tb10x/tb10x.c
@@ -34,31 +34,6 @@ static void __init tb10x_platform_init(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static void __init tb10x_platform_late_init(void)
-{
- struct device_node *dn;
-
- /*
- * Pinctrl documentation recommends setting up the iomux here for
- * all modules which don't require control over the pins themselves.
- * Modules which need this kind of assistance are compatible with
- * "abilis,simple-pinctrl", i.e. we can easily iterate over them.
- * TODO: Does this recommended method work cleanly with pins required
- * by modules?
- */
- for_each_compatible_node(dn, NULL, "abilis,simple-pinctrl") {
- struct platform_device *pd = of_find_device_by_node(dn);
- struct pinctrl *pctl;
-
- pctl = pinctrl_get_select(&pd->dev, "abilis,simple-default");
- if (IS_ERR(pctl)) {
- int ret = PTR_ERR(pctl);
- dev_err(&pd->dev, "Could not set up pinctrl: %d\n",
- ret);
- }
- }
-}
-
static const char *tb10x_compat[] __initdata = {
"abilis,arc-tb10x",
NULL,
@@ -67,5 +42,4 @@ static const char *tb10x_compat[] __initdata = {
MACHINE_START(TB10x, "tb10x")
.dt_compat = tb10x_compat,
.init_machine = tb10x_platform_init,
- .init_late = tb10x_platform_late_init,
MACHINE_END
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d423d58f938d..b02e6bbc1b46 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -14,6 +14,7 @@ config ARM
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
+ select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
select GENERIC_IDLE_POLL_SETUP
select GENERIC_STRNCPY_FROM_USER
@@ -38,6 +39,7 @@ config ARM
select HAVE_GENERIC_HARDIRQS
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_IDE if PCI || ISA || PCMCIA
+ select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
@@ -488,7 +490,7 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
- select CPU_V7
+ select CPU_PJ4
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
select PINCTRL
@@ -1086,6 +1088,20 @@ if !MMU
source "arch/arm/Kconfig-nommu"
endif
+config PJ4B_ERRATA_4742
+ bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
+ depends on CPU_PJ4B && MACH_ARMADA_370
+ default y
+ help
+ When coming out of either a Wait for Interrupt (WFI) or a Wait for
+ Event (WFE) IDLE states, a specific timing sensitivity exists between
+ the retiring WFI/WFE instructions and the newly issued subsequent
+ instructions. This sensitivity can result in a CPU hang scenario.
+ Workaround:
+ The software must insert either a Data Synchronization Barrier (DSB)
+ or Data Memory Barrier (DMB) command immediately after the WFI/WFE
+ instruction
+
config ARM_ERRATA_326103
bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
depends on CPU_V6
@@ -1188,6 +1204,16 @@ config PL310_ERRATA_588369
is not correctly implemented in PL310 as clean lines are not
invalidated as a result of these operations.
+config ARM_ERRATA_643719
+ bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 643719 Cortex-A9 (prior to
+ r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
+ register returns zero when it should return one. The workaround
+ corrects this value, ensuring cache maintenance operations which use
+ it behave as intended and avoiding data corruption.
+
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
depends on CPU_V7
@@ -2005,7 +2031,7 @@ config XIP_PHYS_ADDR
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
- depends on (!SMP || HOTPLUG_CPU)
+ depends on (!SMP || PM_SLEEP_SMP)
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 47374085befd..1ba358ba16b8 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -309,7 +309,7 @@ define archhelp
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
echo ' uImage - U-Boot wrapped zImage'
- echo ' bootpImage - Combined zImage and initial RAM disk'
+ echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=)'
echo '* dtbs - Build device tree blobs for enabled boards'
echo ' install - Install uncompressed kernel'
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 3580d57ea218..120b83bfde20 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -116,7 +116,8 @@ targets := vmlinux vmlinux.lds \
# Make sure files are removed during clean
extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \
- lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs)
+ lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \
+ hyp-stub.S
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -124,7 +125,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S
index 6e8382d5b7a4..5392ee63338f 100644
--- a/arch/arm/boot/compressed/debug.S
+++ b/arch/arm/boot/compressed/debug.S
@@ -1,6 +1,8 @@
#include
#include
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
#include CONFIG_DEBUG_LL_INCLUDE
ENTRY(putc)
@@ -10,3 +12,29 @@ ENTRY(putc)
busyuart r3, r1
mov pc, lr
ENDPROC(putc)
+
+#else
+
+ENTRY(putc)
+ adr r1, 1f
+ ldmia r1, {r2, r3}
+ add r2, r2, r1
+ ldr r1, [r2, r3]
+ strb r0, [r1]
+ mov r0, #0x03 @ SYS_WRITEC
+ ARM( svc #0x123456 )
+ THUMB( svc #0xab )
+ mov pc, lr
+ .align 2
+1: .word _GLOBAL_OFFSET_TABLE_ - .
+ .word semi_writec_buf(GOT)
+ENDPROC(putc)
+
+ .bss
+ .global semi_writec_buf
+ .type semi_writec_buf, %object
+semi_writec_buf:
+ .space 4
+ .size semi_writec_buf, 4
+
+#endif
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 6179d94dd5c6..3115e313d9f6 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -11,6 +11,7 @@
#include
.section ".start", "ax"
+ .arch armv4
__SA1100_start:
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
index 089c560e07f1..92b56897ed64 100644
--- a/arch/arm/boot/compressed/head-shark.S
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -18,6 +18,7 @@
.section ".start", "ax"
+ .arch armv4
b __beginning
__ofw_data: .long 0 @ the number of memory blocks
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fe4d9c3ad761..032a8d987148 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -11,6 +11,7 @@
#include
#include
+ .arch armv7-a
/*
* Debugging stuff
*
@@ -805,8 +806,8 @@ call_cache_fn: adr r12, proc_types
.align 2
.type proc_types,#object
proc_types:
- .word 0x00000000 @ old ARM ID
- .word 0x0000f000
+ .word 0x41000000 @ old ARM ID
+ .word 0xff00f000
mov pc, lr
THUMB( nop )
mov pc, lr
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b9f7121e6ecf..f0895c581a89 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -177,7 +177,9 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear320-evb.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+dtb-$(CONFIG_ARCH_SUNXI) += \
+ sun4i-a10-cubieboard.dtb \
+ sun4i-a10-mini-xplus.dtb \
sun4i-a10-hackberry.dtb \
sun5i-a13-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 1460d9b88adf..8e1248f01fab 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -409,8 +409,8 @@
ti,hwmods = "gpmc";
reg = <0x50000000 0x2000>;
interrupts = <100>;
- num-cs = <7>;
- num-waitpins = <2>;
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 272bbc65fab0..550eb772c30e 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -33,7 +33,8 @@
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&mpic>;
- ranges = <0 0 0xd0000000 0x100000>;
+ ranges = <0 0 0xd0000000 0x0100000 /* internal registers */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
internal-regs {
compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index b2c1b5af9749..aee2b1866ce2 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -29,7 +29,8 @@
};
soc {
- ranges = <0 0xd0000000 0x100000>;
+ ranges = <0 0xd0000000 0x0100000 /* internal registers */
+ 0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
internal-regs {
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
@@ -38,12 +39,12 @@
L2: l2-cache {
compatible = "marvell,aurora-outer-cache";
- reg = <0xd0008000 0x1000>;
+ reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
wt-override;
};
- mpic: interrupt-controller@20000 {
+ interrupt-controller@20000 {
reg = <0x20a00 0x1d0>, <0x21870 0x58>;
};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 26ad06fc147e..76db557adbe7 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -39,6 +39,10 @@
};
soc {
+ ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+ 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>;
+
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index f14d36c46159..fdea75c73411 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -27,6 +27,10 @@
};
soc {
+ ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+ 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>;
+
internal-regs {
serial@12000 {
clock-frequency = <250000000>;
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index bacab11c10dc..5b902f9a3af2 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -31,7 +31,7 @@
wt-override;
};
- mpic: interrupt-controller@20000 {
+ interrupt-controller@20000 {
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 70b5ccbac234..84c4bef2d726 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -264,7 +264,7 @@
atmel,pins =
<0 10 0x2 0x0 /* PA10 periph B */
0 11 0x2 0x0 /* PA11 periph B */
- 0 24 0x2 0x0 /* PA24 periph B */
+ 0 22 0x2 0x0 /* PA22 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0 /* PA26 periph B */
0 27 0x2 0x0 /* PA27 periph B */
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 3de8e6dfbcb1..8d25f889928e 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -57,6 +57,7 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <31>;
};
ramc0: ramc@ffffe800 {
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 3b40d11d65e7..315250b4995e 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -11,7 +11,7 @@
/include/ "at91sam9x5ek.dtsi"
/ {
- model = "Atmel AT91SAM9G25-EK";
+ model = "Atmel AT91SAM9X25-EK";
compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
ahb {
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index f0052dccf9a8..1e12aeff403b 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -44,6 +44,7 @@
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
clock-frequency = <3000000>;
+ arm,primecell-periphid = <0x00241011>;
};
gpio: gpio {
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d1650fb34c0a..ded558bb0f3b 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -763,7 +763,7 @@
};
};
- pinctrl@03680000 {
+ pinctrl@03860000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 98dfc3ea5c0b..fc9fb3d526e2 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -161,9 +161,9 @@
interrupts = <0 50 0>;
};
- pinctrl_3: pinctrl@03680000 {
+ pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5250-pinctrl";
- reg = <0x0368000 0x1000>;
+ reg = <0x03860000 0x1000>;
interrupts = <0 47 0>;
};
@@ -497,6 +497,21 @@
clock-names = "usbhost";
};
+ usbphy@12130000 {
+ compatible = "samsung,exynos5250-usb2phy";
+ reg = <0x12130000 0x100>;
+ clocks = <&clock 1>, <&clock 285>;
+ clock-names = "ext_xtal", "usbhost";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbphy-sys {
+ reg = <0x10040704 0x8>,
+ <0x10050230 0x4>;
+ };
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index d2550e0bca24..701153992c69 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -141,8 +141,8 @@
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x43fa4000 0x4000>;
- clocks = <&clks 62>;
- clock-names = "ipg";
+ clocks = <&clks 62>, <&clks 62>;
+ clock-names = "ipg", "per";
interrupts = <14>;
status = "disabled";
};
@@ -182,8 +182,8 @@
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50004000 0x4000>;
interrupts = <0>;
- clocks = <&clks 80>;
- clock-names = "ipg";
+ clocks = <&clks 80>, <&clks 80>;
+ clock-names = "ipg", "per";
status = "disabled";
};
@@ -210,8 +210,8 @@
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50010000 0x4000>;
- clocks = <&clks 79>;
- clock-names = "ipg";
+ clocks = <&clks 79>, <&clks 79>;
+ clock-names = "ipg", "per";
interrupts = <13>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index ff4bd4873edf..75bd11386516 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -131,7 +131,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000e000 0x1000>;
interrupts = <16>;
- clocks = <&clks 53>, <&clks 0>;
+ clocks = <&clks 53>, <&clks 53>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -142,7 +142,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x1000f000 0x1000>;
interrupts = <15>;
- clocks = <&clks 52>, <&clks 0>;
+ clocks = <&clks 52>, <&clks 52>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -223,7 +223,7 @@
compatible = "fsl,imx27-cspi";
reg = <0x10017000 0x1000>;
interrupts = <6>;
- clocks = <&clks 51>, <&clks 0>;
+ clocks = <&clks 51>, <&clks 51>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 21bb786c5b31..53fdde69bbf4 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -631,7 +631,7 @@
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 0>;
+ clocks = <&clks 55>, <&clks 55>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 845982eaac22..eb83aa039b8b 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -714,7 +714,7 @@
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 0>;
+ clocks = <&clks 55>, <&clks 55>;
clock-names = "ipg", "per";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 82a404da1c0d..99ba6e14ebf3 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -516,7 +516,7 @@
usb_otg_hs: usb_otg_hs@480ab000 {
compatible = "ti,omap3-musb";
reg = <0x480ab000 0x1000>;
- interrupts = <0 92 0x4>, <0 93 0x4>;
+ interrupts = <92>, <93>;
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
multipoint = <1>;
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 03bd60deb52b..eeb734e25709 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -56,9 +56,23 @@
};
};
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6030_wkup_pins
+ >;
+
+ twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+ pinctrl-single,pins = <
+ 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ >;
+ };
+};
+
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
+ &twl6030_pins
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
@@ -66,6 +80,12 @@
&tpd12s015_pins
>;
+ twl6030_pins: pinmux_twl6030_pins {
+ pinctrl-single,pins = <
+ 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ >;
+ };
+
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index a35d9cd58063..98505a2ef162 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -142,9 +142,23 @@
};
};
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6030_wkup_pins
+ >;
+
+ twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+ pinctrl-single,pins = <
+ 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ >;
+ };
+};
+
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
+ &twl6030_pins
&twl6040_pins
&mcpdm_pins
&dmic_pins
@@ -179,6 +193,12 @@
>;
};
+ twl6030_pins: pinmux_twl6030_pins {
+ pinctrl-single,pins = <
+ 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ >;
+ };
+
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 3dd7ff825828..635cae283011 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -538,6 +538,7 @@
interrupts = <0 41 0x4>;
ti,hwmods = "timer5";
ti,timer-dsp;
+ ti,timer-pwm;
};
timer6: timer@4013a000 {
@@ -574,6 +575,7 @@
reg = <0x4803e000 0x80>;
interrupts = <0 45 0x4>;
ti,hwmods = "timer9";
+ ti,timer-pwm;
};
timer10: timer@48086000 {
@@ -581,6 +583,7 @@
reg = <0x48086000 0x80>;
interrupts = <0 46 0x4>;
ti,hwmods = "timer10";
+ ti,timer-pwm;
};
timer11: timer@48088000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 2e643ea51cce..5000e0d42849 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -75,11 +75,6 @@
compatible = "atmel,at91sam9x5-spi";
reg = <0xf0004000 0x100>;
interrupts = <24 4 3>;
- cs-gpios = <&pioD 13 0
- &pioD 14 0 /* conflicts with SCK0 and CANRX0 */
- &pioD 15 0 /* conflicts with CTS0 and CANTX0 */
- &pioD 16 0 /* conflicts with RTS0 and PWMFI3 */
- >;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
@@ -156,7 +151,7 @@
};
macb0: ethernet@f0028000 {
- compatible = "cnds,pc302-gem", "cdns,gem";
+ compatible = "cdns,pc302-gem", "cdns,gem";
reg = <0xf0028000 0x100>;
interrupts = <34 4 3>;
pinctrl-names = "default";
@@ -203,11 +198,6 @@
compatible = "atmel,at91sam9x5-spi";
reg = <0xf8008000 0x100>;
interrupts = <25 4 3>;
- cs-gpios = <&pioC 25 0
- &pioC 26 0 /* conflitcs with TWD1 and ISI_D11 */
- &pioC 27 0 /* conflitcs with TWCK1 and ISI_D10 */
- &pioC 28 0 /* conflitcs with PWMFI0 and ISI_D9 */
- >;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 1f8ed404626c..b336e7787cb3 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -32,6 +32,10 @@
ahb {
apb {
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+ };
+
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
};
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index b28fbf3408e3..6f82d9368948 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -14,13 +14,19 @@
bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
};
+ /* This is where the interrupt is routed on the S8815 board */
+ external-bus@34000000 {
+ ethernet@300 {
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 0x1>;
+ };
+ };
+
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
/* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
ethernet-gpio {
- gpios = <&gpio3 19 0x1>;
- interrupts = <19 0x1>;
- interrupt-parent = <&gpio3>;
+ gpios = <&gpio3 8 0x1>;
};
/* This will bias the MMC/SD card detect line */
mmcsd-gpio {
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 4a7c35d6726a..078ed7f618d7 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,8 +22,8 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc {
- uart0: uart@01c28000 {
+ soc@01c20000 {
+ uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
index 52b88d81b7bb..3caed0db6986 100644
--- a/arch/arm/common/mcpm_platsmp.c
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -15,8 +15,6 @@
#include
#include
-#include
-
#include
#include
#include
@@ -49,7 +47,6 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i
static void __cpuinit mcpm_secondary_init(unsigned int cpu)
{
mcpm_cpu_powered_up();
- gic_secondary_init(0);
}
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index ddc740769601..023ee63827a2 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -28,8 +28,8 @@
#include
#include
#include
+#include
-#include
#include
#include
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index e40b435d204e..227abf9cc601 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -1,4 +1,4 @@
-CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
@@ -7,17 +7,18 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
CONFIG_ARCH_EXYNOS=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_LOWLEVEL_UART_PORT=3
CONFIG_S3C24XX_PWM=y
CONFIG_ARCH_EXYNOS5=y
CONFIG_MACH_EXYNOS4_DT=y
-CONFIG_MACH_EXYNOS5_DT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
@@ -30,35 +31,58 @@ CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_KEYBOARD_CROS_EC=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_CYAPA=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_HW_RANDOM=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_S3C2410=y
+CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_MAX77686=y
+CONFIG_MFD_MAX8997=y
+CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_TPS65090=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX8997=y
+CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_SIMPLE=y
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
CONFIG_EXYNOS_DP=y
@@ -67,6 +91,20 @@ CONFIG_FONTS=y
CONFIG_FONT_7x14=y
CONFIG_LOGO=y
CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_S5P=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_PHY=y
+CONFIG_SAMSUNG_USB2PHY=y
+CONFIG_SAMSUNG_USB3PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_COMMON_CLK_MAX77686=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
@@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
@@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_SHA256=y
CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 7e0ebb64a7f9..9940f7b4e438 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -199,7 +199,6 @@ CONFIG_USB_PHY=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c1ef64bc5abd..abbe31937c65 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -20,6 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
@@ -204,7 +205,6 @@ CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index a5f0485133cf..f7ba316164d4 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -153,6 +153,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
+CONFIG_TEGRA_HOST1X=y
CONFIG_DRM_TEGRA=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
@@ -202,7 +203,7 @@ CONFIG_TEGRA20_APB_DMA=y
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
-CONFIG_SENSORS_AK8975=y
+CONFIG_AK8975=y
CONFIG_MFD_NVEC=y
CONFIG_KEYBOARD_NVEC=y
CONFIG_SERIO_NVEC_PS2=y
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
index 92c6eed7aac9..99207c45ec10 100644
--- a/arch/arm/crypto/sha1-armv4-large.S
+++ b/arch/arm/crypto/sha1-armv4-large.S
@@ -195,6 +195,7 @@ ENTRY(sha1_block_data_order)
add r3,r3,r10 @ E+=F_00_19(B,C,D)
cmp r14,sp
bne .L_00_15 @ [((11+4)*5+2)*3]
+ sub sp,sp,#25*4
#if __ARM_ARCH__<7
ldrb r10,[r1,#2]
ldrb r9,[r1,#3]
@@ -290,7 +291,6 @@ ENTRY(sha1_block_data_order)
add r3,r3,r10 @ E+=F_00_19(B,C,D)
ldr r8,.LK_20_39 @ [+15+16*4]
- sub sp,sp,#25*4
cmn sp,#0 @ [+3], clear carry to denote 20_39
.L_20_39_or_60_79:
ldr r9,[r14,#15*4]
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index bff71388e72a..17d0ae8672fa 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -320,9 +320,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
}
#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
-static inline void flush_kernel_dcache_page(struct page *page)
-{
-}
+extern void flush_kernel_dcache_page(struct page *);
#define flush_dcache_mmap_lock(mapping) \
spin_lock_irq(&(mapping)->tree_lock)
diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h
index 7eb18c1d8d6c..4f009c10540d 100644
--- a/arch/arm/include/asm/cmpxchg.h
+++ b/arch/arm/include/asm/cmpxchg.h
@@ -233,15 +233,15 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
((__typeof__(*(ptr)))atomic64_cmpxchg(container_of((ptr), \
atomic64_t, \
counter), \
- (unsigned long)(o), \
- (unsigned long)(n)))
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
#define cmpxchg64_local(ptr, o, n) \
((__typeof__(*(ptr)))local64_cmpxchg(container_of((ptr), \
local64_t, \
a), \
- (unsigned long)(o), \
- (unsigned long)(n)))
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
#endif /* __LINUX_ARM_ARCH__ >= 6 */
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 7652712d1d14..dba62cb1ad08 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -32,6 +32,8 @@
#define MPIDR_HWID_BITMASK 0xFFFFFF
+#define MPIDR_INVALID (~MPIDR_HWID_BITMASK)
+
#define MPIDR_LEVEL_BITS 8
#define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1)
diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h
index ac1dd54724b6..8017e94acc5e 100644
--- a/arch/arm/include/asm/glue-proc.h
+++ b/arch/arm/include/asm/glue-proc.h
@@ -230,6 +230,15 @@
# endif
#endif
+#ifdef CONFIG_CPU_PJ4B
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_pj4b
+# endif
+#endif
+
#ifndef MULTI_CPU
#define cpu_proc_init __glue(CPU_NAME,_proc_init)
#define cpu_proc_fin __glue(CPU_NAME,_proc_fin)
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index 968c0a14e0a3..209e6504922e 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off)
static inline unsigned long __my_cpu_offset(void)
{
unsigned long off;
- /* Read TPIDRPRW */
- asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory");
+ register unsigned long *sp asm ("sp");
+
+ /*
+ * Read TPIDRPRW.
+ * We want to allow caching the value, so avoid using volatile and
+ * instead use a fake stack read to hazard against barrier().
+ */
+ asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp));
+
return off;
}
#define __my_cpu_offset __my_cpu_offset()
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index 3d520ddca61b..2389b71a8e7c 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -1,16 +1,4 @@
-/*
- * sched_clock.h: support for extending counters to full 64-bit ns counter
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+/* You shouldn't include this file. Use linux/sched_clock.h instead.
+ * Temporary file until all asm/sched_clock.h users are gone
*/
-#ifndef ASM_SCHED_CLOCK
-#define ASM_SCHED_CLOCK
-
-extern void sched_clock_postinit(void);
-extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
-
-extern unsigned long long (*sched_clock_func)(void);
-
-#endif
+#include
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index aaa61b6f50ff..e78983202737 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -49,7 +49,7 @@ static inline int cache_ops_need_broadcast(void)
/*
* Logical CPU mapping.
*/
-extern int __cpu_logical_map[];
+extern u32 __cpu_logical_map[];
#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
/*
* Retrieve logical cpu index corresponding to a given MPIDR[23:0]
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 99a19512ee26..bdf2b8458ec1 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -33,18 +33,6 @@
#include
#include
-/*
- * We need to delay page freeing for SMP as other CPUs can access pages
- * which have been removed but not yet had their TLB entries invalidated.
- * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
- * we need to apply this same delaying tactic to ensure correct operation.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
-#define tlb_fast_mode(tlb) 0
-#else
-#define tlb_fast_mode(tlb) 1
-#endif
-
#define MMU_GATHER_BUNDLE 8
/*
@@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb)
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
tlb_flush(tlb);
- if (!tlb_fast_mode(tlb)) {
- free_pages_and_swap_cache(tlb->pages, tlb->nr);
- tlb->nr = 0;
- if (tlb->pages == tlb->local)
- __tlb_alloc_page(tlb);
- }
+ free_pages_and_swap_cache(tlb->pages, tlb->nr);
+ tlb->nr = 0;
+ if (tlb->pages == tlb->local)
+ __tlb_alloc_page(tlb);
}
static inline void
@@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
{
- if (tlb_fast_mode(tlb)) {
- free_page_and_swap_cache(page);
- return 1; /* avoid calling tlb_flush_mmu */
- }
-
tlb->pages[tlb->nr++] = page;
VM_BUG_ON(tlb->nr > tlb->max);
return tlb->max - tlb->nr;
diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S
index 2848857f5b62..fbd24beeb1fa 100644
--- a/arch/arm/include/debug/ux500.S
+++ b/arch/arm/include/debug/ux500.S
@@ -24,9 +24,9 @@
#define U8500_UART0_PHYS_BASE (0x80120000)
#define U8500_UART1_PHYS_BASE (0x80121000)
#define U8500_UART2_PHYS_BASE (0x80007000)
-#define U8500_UART0_VIRT_BASE (0xa8120000)
-#define U8500_UART1_VIRT_BASE (0xa8121000)
-#define U8500_UART2_VIRT_BASE (0xa8007000)
+#define U8500_UART0_VIRT_BASE (0xf8120000)
+#define U8500_UART1_VIRT_BASE (0xf8121000)
+#define U8500_UART2_VIRT_BASE (0xf8007000)
#define __UX500_PHYS_UART(n) U8500_UART##n##_PHYS_BASE
#define __UX500_VIRT_UART(n) U8500_UART##n##_VIRT_BASE
#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 5f3338eacad2..97cb0576d07c 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -16,7 +16,7 @@ CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \
- process.o ptrace.o return_address.o sched_clock.o \
+ process.o ptrace.o return_address.o \
setup.o signal.o stacktrace.o sys_arm.o time.o traps.o
obj-$(CONFIG_ATAGS) += atags_parse.o
diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c
index 59dcdced6e30..221f07b11ccb 100644
--- a/arch/arm/kernel/arch_timer.c
+++ b/arch/arm/kernel/arch_timer.c
@@ -11,9 +11,9 @@
#include
#include
#include
+#include
#include
-#include
#include
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 5af04f6daa33..5859c8bc727c 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -82,7 +82,7 @@ void __init arm_dt_init_cpu_maps(void)
u32 i, j, cpuidx = 1;
u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
- u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = UINT_MAX };
+ u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
bool bootcpu_valid = false;
cpus = of_find_node_by_path("/cpus");
@@ -92,6 +92,9 @@ void __init arm_dt_init_cpu_maps(void)
for_each_child_of_node(cpus, cpu) {
u32 hwid;
+ if (of_node_cmp(cpu->type, "cpu"))
+ continue;
+
pr_debug(" * %s...\n", cpu->full_name);
/*
* A device tree containing CPU nodes with missing "reg"
@@ -149,9 +152,10 @@ void __init arm_dt_init_cpu_maps(void)
tmp_map[i] = hwid;
}
- if (WARN(!bootcpu_valid, "DT missing boot CPU MPIDR[23:0], "
- "fall back to default cpu_logical_map\n"))
+ if (!bootcpu_valid) {
+ pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");
return;
+ }
/*
* Since the boot CPU node contains proper data, and all nodes have
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 8ef8c9337809..4fb074c446bf 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -134,6 +134,10 @@ void machine_kexec(struct kimage *image)
unsigned long reboot_code_buffer_phys;
void *reboot_code_buffer;
+ if (num_online_cpus() > 1) {
+ pr_err("kexec: error: multiple CPUs still online\n");
+ return;
+ }
page_list = image->head & PAGE_MASK;
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index f21970316836..6e8931ccf13e 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -184,30 +184,61 @@ int __init reboot_setup(char *str)
__setup("reboot=", reboot_setup);
+/*
+ * Called by kexec, immediately prior to machine_kexec().
+ *
+ * This must completely disable all secondary CPUs; simply causing those CPUs
+ * to execute e.g. a RAM-based pin loop is not sufficient. This allows the
+ * kexec'd kernel to use any and all RAM as it sees fit, without having to
+ * avoid any code or data used by any SW CPU pin loop. The CPU hotplug
+ * functionality embodied in disable_nonboot_cpus() to achieve this.
+ */
void machine_shutdown(void)
{
-#ifdef CONFIG_SMP
- smp_send_stop();
-#endif
+ disable_nonboot_cpus();
}
+/*
+ * Halting simply requires that the secondary CPUs stop performing any
+ * activity (executing tasks, handling interrupts). smp_send_stop()
+ * achieves this.
+ */
void machine_halt(void)
{
- machine_shutdown();
+ smp_send_stop();
+
local_irq_disable();
while (1);
}
+/*
+ * Power-off simply requires that the secondary CPUs stop performing any
+ * activity (executing tasks, handling interrupts). smp_send_stop()
+ * achieves this. When the system power is turned off, it will take all CPUs
+ * with it.
+ */
void machine_power_off(void)
{
- machine_shutdown();
+ smp_send_stop();
+
if (pm_power_off)
pm_power_off();
}
+/*
+ * Restart requires that the secondary CPUs stop performing any activity
+ * while the primary CPU resets the system. Systems with a single CPU can
+ * use soft_restart() as their machine descriptor's .restart hook, since that
+ * will cause the only available CPU to reset. Systems with multiple CPUs must
+ * provide a HW restart implementation, to ensure that all CPUs reset at once.
+ * This is required so that any code running after reset on the primary CPU
+ * doesn't have to co-ordinate with other CPUs to ensure they aren't still
+ * executing pre-reset code, and using RAM that the primary CPU's code wishes
+ * to use. Implementing such co-ordination would be essentially impossible.
+ */
void machine_restart(char *cmd)
{
- machine_shutdown();
+ smp_send_stop();
arm_pm_restart(reboot_mode, cmd);
@@ -411,7 +442,6 @@ static struct vm_area_struct gate_vma = {
.vm_start = 0xffff0000,
.vm_end = 0xffff0000 + PAGE_SIZE,
.vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC,
- .vm_mm = &init_mm,
};
static int __init gate_vma_init(void)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 1522c7ae31b0..b4b1d397592b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -444,7 +444,7 @@ void notrace cpu_init(void)
: "r14");
}
-int __cpu_logical_map[NR_CPUS];
+u32 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
void __init smp_setup_processor_id(void)
{
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 47ab90563bf4..5919eb451bb9 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -251,7 +251,7 @@ void __ref cpu_die(void)
* this returns, power and/or clocks can be removed at any point
* from this CPU and its cache by platform_cpu_kill().
*/
- RCU_NONIDLE(complete(&cpu_died));
+ complete(&cpu_died);
/*
* Ensure that the cache lines associated with that completion are
@@ -651,17 +651,6 @@ void smp_send_reschedule(int cpu)
smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
}
-#ifdef CONFIG_HOTPLUG_CPU
-static void smp_kill_cpus(cpumask_t *mask)
-{
- unsigned int cpu;
- for_each_cpu(cpu, mask)
- platform_cpu_kill(cpu);
-}
-#else
-static void smp_kill_cpus(cpumask_t *mask) { }
-#endif
-
void smp_send_stop(void)
{
unsigned long timeout;
@@ -679,8 +668,6 @@ void smp_send_stop(void)
if (num_online_cpus() > 1)
pr_warning("SMP: failed to stop secondary CPUs\n");
-
- smp_kill_cpus(&mask);
}
/*
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index abff4e9aaee0..98aee3258398 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -24,9 +24,9 @@
#include
#include
#include
+#include
#include
-#include
#include
#include
#include
@@ -120,6 +120,4 @@ void __init time_init(void)
machine_desc->init_time();
else
clocksource_of_init();
-
- sched_clock_postinit();
}
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index f10316b4ecdc..c5a59546a256 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -13,6 +13,7 @@
#include
#include
+#include
#include
#include
#include
@@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
* cpu topology table
*/
struct cputopo_arm cpu_topology[NR_CPUS];
+EXPORT_SYMBOL_GPL(cpu_topology);
const struct cpumask *cpu_coregroup_mask(int cpu)
{
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 37d216d814cd..ef1703b9587b 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu)
wait_event_interruptible(*wq, !vcpu->arch.pause);
}
+static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
+{
+ return vcpu->arch.target >= 0;
+}
+
/**
* kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
* @vcpu: The VCPU pointer
@@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
int ret;
sigset_t sigsaved;
- /* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */
- if (unlikely(vcpu->arch.target < 0))
+ if (unlikely(!kvm_vcpu_initialized(vcpu)))
return -ENOEXEC;
ret = kvm_vcpu_first_run_init(vcpu);
@@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
case KVM_SET_ONE_REG:
case KVM_GET_ONE_REG: {
struct kvm_one_reg reg;
+
+ if (unlikely(!kvm_vcpu_initialized(vcpu)))
+ return -ENOEXEC;
+
if (copy_from_user(®, argp, sizeof(reg)))
return -EFAULT;
if (ioctl == KVM_SET_ONE_REG)
@@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
struct kvm_reg_list reg_list;
unsigned n;
+ if (unlikely(!kvm_vcpu_initialized(vcpu)))
+ return -ENOEXEC;
+
if (copy_from_user(®_list, user_list, sizeof(reg_list)))
return -EFAULT;
n = reg_list.n;
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 965706578f13..84ba67b982c0 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -43,7 +43,14 @@ static phys_addr_t hyp_idmap_vector;
static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
{
- kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
+ /*
+ * This function also gets called when dealing with HYP page
+ * tables. As HYP doesn't have an associated struct kvm (and
+ * the HYP page tables are fairly static), we don't do
+ * anything there.
+ */
+ if (kvm)
+ kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa);
}
static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache,
@@ -78,18 +85,20 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc)
return p;
}
-static void clear_pud_entry(pud_t *pud)
+static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr)
{
pmd_t *pmd_table = pmd_offset(pud, 0);
pud_clear(pud);
+ kvm_tlb_flush_vmid_ipa(kvm, addr);
pmd_free(NULL, pmd_table);
put_page(virt_to_page(pud));
}
-static void clear_pmd_entry(pmd_t *pmd)
+static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr)
{
pte_t *pte_table = pte_offset_kernel(pmd, 0);
pmd_clear(pmd);
+ kvm_tlb_flush_vmid_ipa(kvm, addr);
pte_free_kernel(NULL, pte_table);
put_page(virt_to_page(pmd));
}
@@ -100,11 +109,12 @@ static bool pmd_empty(pmd_t *pmd)
return page_count(pmd_page) == 1;
}
-static void clear_pte_entry(pte_t *pte)
+static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr)
{
if (pte_present(*pte)) {
kvm_set_pte(pte, __pte(0));
put_page(virt_to_page(pte));
+ kvm_tlb_flush_vmid_ipa(kvm, addr);
}
}
@@ -114,7 +124,8 @@ static bool pte_empty(pte_t *pte)
return page_count(pte_page) == 1;
}
-static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size)
+static void unmap_range(struct kvm *kvm, pgd_t *pgdp,
+ unsigned long long start, u64 size)
{
pgd_t *pgd;
pud_t *pud;
@@ -138,15 +149,15 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size)
}
pte = pte_offset_kernel(pmd, addr);
- clear_pte_entry(pte);
+ clear_pte_entry(kvm, pte, addr);
range = PAGE_SIZE;
/* If we emptied the pte, walk back up the ladder */
if (pte_empty(pte)) {
- clear_pmd_entry(pmd);
+ clear_pmd_entry(kvm, pmd, addr);
range = PMD_SIZE;
if (pmd_empty(pmd)) {
- clear_pud_entry(pud);
+ clear_pud_entry(kvm, pud, addr);
range = PUD_SIZE;
}
}
@@ -165,14 +176,14 @@ void free_boot_hyp_pgd(void)
mutex_lock(&kvm_hyp_pgd_mutex);
if (boot_hyp_pgd) {
- unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
- unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
+ unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE);
+ unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
kfree(boot_hyp_pgd);
boot_hyp_pgd = NULL;
}
if (hyp_pgd)
- unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
+ unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE);
kfree(init_bounce_page);
init_bounce_page = NULL;
@@ -200,9 +211,10 @@ void free_hyp_pgds(void)
if (hyp_pgd) {
for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE)
- unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+ unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE)
- unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+ unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE);
+
kfree(hyp_pgd);
hyp_pgd = NULL;
}
@@ -393,7 +405,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm)
*/
static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
{
- unmap_range(kvm->arch.pgd, start, size);
+ unmap_range(kvm, kvm->arch.pgd, start, size);
}
/**
@@ -675,7 +687,6 @@ static void handle_hva_to_gpa(struct kvm *kvm,
static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data)
{
unmap_stage2_range(kvm, gpa, PAGE_SIZE);
- kvm_tlb_flush_vmid_ipa(kvm, gpa);
}
int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 2acdff4c1dfe..180b3024bec3 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,6 +174,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
static struct clock_event_device clkevt = {
.name = "at91_tick",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
.rating = 150,
.set_next_event = clkevt32k_next_event,
.set_mode = clkevt32k_mode,
@@ -264,9 +265,11 @@ void __init at91rm9200_timer_init(void)
at91_st_write(AT91_ST_RTMR, 1);
/* Setup timer clockevent, with minimum of two ticks (important!!) */
+ clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
+ clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
+ clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
clkevt.cpumask = cpumask_of(0);
- clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
- 2, AT91_ST_ALMV);
+ clockevents_register_device(&clkevt);
/* register clocksource */
clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 13cdbcd48f51..c7d670d11802 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -223,13 +223,7 @@ static void __init at91sam9n12_map_io(void)
at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
}
-void __init at91sam9n12_initialize(void)
-{
- at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0);
-}
-
AT91_SOC_START(at91sam9n12)
.map_io = at91sam9n12_map_io,
.register_clocks = at91sam9n12_register_clocks,
- .init = at91sam9n12_initialize,
AT91_SOC_END
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 31df12029c4e..2bd7f51b0b82 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -179,9 +179,9 @@ extern void __iomem *at91_pmc_base;
#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */
#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */
#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */
-#define AT91_PMC_PCR_DIV2 0x2 /* Peripheral clock is MCK/2 */
-#define AT91_PMC_PCR_DIV4 0x4 /* Peripheral clock is MCK/4 */
-#define AT91_PMC_PCR_DIV8 0x8 /* Peripheral clock is MCK/8 */
+#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */
+#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */
+#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */
#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */
#endif
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index bad361ec1666..7a55b5c95971 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -18,8 +18,8 @@
#include
#include
#include
+#include
-#include
#include
#include
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index d19edff0ea6e..ff18fc2ea46f 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -250,6 +250,7 @@ config MACH_ARMLEX4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CLKSRC_MMIO
+ select CLKSRC_SAMSUNG_PWM
select CPU_EXYNOS4210
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
@@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210
select S5P_DEV_TV
select S5P_GPIO_INT
select S5P_SETUP_MIPIPHY
- select SAMSUNG_HRT
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
@@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT
depends on ARCH_EXYNOS4
select ARM_AMBA
select CLKSRC_OF
+ select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
select CPU_EXYNOS4210
select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select PINCTRL
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 745e304ad0de..f7e504b7874d 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -10,12 +10,14 @@
*/
#include
+#include
#include
#include
#include
#include
#include
#include
+#include
#include
#include
#include
@@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = {
},
};
+static struct samsung_pwm_variant exynos4_pwm_variant = {
+ .bits = 32,
+ .div_base = 0,
+ .has_tint_cstat = true,
+ .tclk_mask = 0,
+};
+
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -317,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd)
val = 0x1;
addr = EXYNOS_SWRESET;
} else if (of_machine_is_compatible("samsung,exynos5440")) {
+ u32 status;
np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
+
+ addr = of_iomap(np, 0) + 0xbc;
+ status = __raw_readl(addr);
+
addr = of_iomap(np, 0) + 0xcc;
- val = (0xfff << 20) | (0x1 << 16);
+ val = __raw_readl(addr);
+
+ val = (val & 0xffff0000) | (status & 0xffff);
} else {
pr_err("%s: cannot support non-DT\n", __func__);
return;
@@ -370,6 +386,8 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
void __init exynos_init_io(struct map_desc *mach_desc, int size)
{
+ debug_ll_io_init();
+
#ifdef CONFIG_OF
if (initial_boot_params)
of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
@@ -442,8 +460,20 @@ static void __init exynos5440_map_io(void)
iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
}
+void __init exynos_set_timer_source(u8 channels)
+{
+ exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+ exynos4_pwm_variant.output_mask &= ~channels;
+}
+
void __init exynos_init_time(void)
{
+ unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+ EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC,
+ EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC,
+ EXYNOS4_IRQ_TIMER4_VIC,
+ };
+
if (of_have_populated_dt()) {
#ifdef CONFIG_OF
of_clk_init(NULL);
@@ -455,7 +485,14 @@ void __init exynos_init_time(void)
exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1);
exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
#endif
- mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
+#ifdef CONFIG_CLKSRC_SAMSUNG_PWM
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ samsung_pwm_clocksource_init(S3C_VA_TIMER,
+ timer_irqs, &exynos4_pwm_variant);
+ else
+#endif
+ mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0,
+ EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
}
}
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 60dd35cc01a6..11fc1e29819b 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
void exynos_firmware_init(void);
+void exynos_set_timer_source(u8 channels);
+
#ifdef CONFIG_PM_GENERIC_DOMAINS
int exynos_pm_late_initcall(void);
#else
diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h
index 7dbbfec13ea5..296090e7f423 100644
--- a/arch/arm/mach-exynos/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos/include/mach/pm-core.h
@@ -18,8 +18,15 @@
#ifndef __ASM_ARCH_PM_CORE_H
#define __ASM_ARCH_PM_CORE_H __FILE__
+#include
#include
+#ifdef CONFIG_PINCTRL_EXYNOS
+extern u32 exynos_get_eint_wake_mask(void);
+#else
+static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
+#endif
+
static inline void s3c_pm_debug_init_uart(void)
{
/* nothing here yet */
@@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void)
static inline void s3c_pm_arch_prepare_irqs(void)
{
- __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+ u32 eintmask = s3c_irqwake_eintmask;
+
+ if (of_have_populated_dt())
+ eintmask = exynos_get_eint_wake_mask();
+
+ __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK);
__raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
}
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 327d50d4681d..74ddb2b55614 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -41,7 +41,6 @@
#include
#include
#include
-#include
#include
#include
@@ -1094,7 +1093,7 @@ static void __init universal_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
- samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
+ exynos_set_timer_source(BIT(2) | BIT(4));
xxti_f = 0;
xusbxti_f = 24000000;
}
@@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
- .init_time = samsung_timer_init,
+ .init_time = exynos_init_time,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 151259003086..4e3148ce852d 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -177,17 +177,18 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
-static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", };
static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
-static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", };
static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
static const char *gpu_axi_sels[] = { "axi", "ahb", };
static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
-static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", };
static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
-static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
+static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
@@ -369,8 +370,8 @@ int __init mx6q_clocks_init(void)
clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
- clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
- clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
@@ -498,7 +499,7 @@ int __init mx6q_clocks_init(void)
clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
- clk[mlb] = imx_clk_gate2("mlb", "pll8_mlb", base + 0x74, 18);
+ clk[mlb] = imx_clk_gate2("mlb", "axi", base + 0x74, 18);
clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 67b9c48dcafe..627f16f0e9d1 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -18,8 +18,20 @@
.section ".text.head", "ax"
#ifdef CONFIG_SMP
+diag_reg_offset:
+ .word g_diag_reg - .
+
+ .macro set_diag_reg
+ adr r0, diag_reg_offset
+ ldr r1, [r0]
+ add r1, r1, r0 @ r1 = physical &g_diag_reg
+ ldr r0, [r1]
+ mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register
+ .endm
+
ENTRY(v7_secondary_startup)
bl v7_invalidate_l1
+ set_diag_reg
b secondary_startup
ENDPROC(v7_secondary_startup)
#endif
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 4a69305db65e..c6e1ab544882 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -12,6 +12,7 @@
#include
#include
+#include
#include
#include
#include
@@ -21,6 +22,7 @@
#define SCU_STANDBY_ENABLE (1 << 5)
+u32 g_diag_reg;
static void __iomem *scu_base;
static struct map_desc scu_io_desc __initdata = {
@@ -80,6 +82,18 @@ void imx_smp_prepare(void)
static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
{
imx_smp_prepare();
+
+ /*
+ * The diagnostic register holds the errata bits. Mostly bootloader
+ * does not bring up secondary cores, so that when errata bits are set
+ * in bootloader, they are set only for boot cpu. But on a SMP
+ * configuration, it should be equally done on every single core.
+ * Read the register from boot cpu here, and will replicate it into
+ * secondary cores when booting them.
+ */
+ asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc");
+ __cpuc_flush_dcache_area(&g_diag_reg, sizeof(g_diag_reg));
+ outer_clean_range(__pa(&g_diag_reg), __pa(&g_diag_reg + 1));
}
struct smp_operations imx_smp_ops __initdata = {
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index fea91313678b..cd46529e9eaa 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -26,8 +26,8 @@
#include
#include
#include
+#include
-#include
#include
#include "common.h"
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index b23c8e4f28e8..aa4346227c41 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -41,6 +41,7 @@
#include
#include
#include
+#include
#include