Merge branch 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux
* 'for-linus/2635-updates' of git://git.fluff.org/bjdooks/linux: ARM: S5PV210: serial: Fix section mismatch warning ARM: s3c2410_defconfig: Add new machines ARM: s3c6400_defconfig: Add framebuffer and basic LCD ARM: s3c6400_defconfig: Add RTC driver support ARM: s3c6400_defconfig: Enable USB host side ARM: s3c6400_defconfig: Add SPI driver ARM: s3c6400_defconfig: Update compiled machines ARM: S5P: Regoster clk_xusbxti clock for hsotg driver ARM: S3C64XX: Add USB OTG HCLK to the list of clocks ARM: SAMSUNG: gpio-cfg.h: update documentation ARM: SAMSUNG: Documentation: add documentation on GPIO code ARM: SAMSUNG: Fix documentation for s3c_gpio_cfgpin() ARM: S3C24XX: Documentation: add section on gpiolib changes ARM: S3C24XX: Documentation: update GPIO documentation ARM: S3C24XX: Documentation: update documentation overview ARM: SAMSUNG: Documentation: update directory layout ARM: SAMSUNG: Documentation: update the list of SoCs supported
This commit is contained in:
Linus Torvalds
commit
043f275d78
|
|
@ -12,6 +12,8 @@ Introduction
|
|||
of the s3c2410 GPIO system, please read the Samsung provided
|
||||
data-sheet/users manual to find out the complete list.
|
||||
|
||||
See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
|
||||
|
||||
|
||||
GPIOLIB
|
||||
-------
|
||||
|
|
@ -24,8 +26,60 @@ GPIOLIB
|
|||
listed below will be removed (they may be marked as __deprecated
|
||||
in the near future).
|
||||
|
||||
- s3c2410_gpio_getpin
|
||||
- s3c2410_gpio_setpin
|
||||
The following functions now either have a s3c_ specific variant
|
||||
or are merged into gpiolib. See the definitions in
|
||||
arch/arm/plat-samsung/include/plat/gpio-cfg.h:
|
||||
|
||||
s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output()
|
||||
s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input()
|
||||
s3c2410_gpio_getirq() gpio_to_irq()
|
||||
s3c2410_gpio_cfgpin() s3c_gpio_cfgpin()
|
||||
s3c2410_gpio_getcfg() s3c_gpio_getcfg()
|
||||
s3c2410_gpio_pullup() s3c_gpio_setpull()
|
||||
|
||||
|
||||
GPIOLIB conversion
|
||||
------------------
|
||||
|
||||
If you need to convert your board or driver to use gpiolib from the exiting
|
||||
s3c2410 api, then here are some notes on the process.
|
||||
|
||||
1) If your board is exclusively using an GPIO, say to control peripheral
|
||||
power, then it will require to claim the gpio with gpio_request() before
|
||||
it can use it.
|
||||
|
||||
It is recommended to check the return value, with at least WARN_ON()
|
||||
during initialisation.
|
||||
|
||||
2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
|
||||
as they have the same arguments, and can either take the pin specific
|
||||
values, or the more generic special-function-number arguments.
|
||||
|
||||
3) s3c2410_gpio_pullup() changs have the problem that whilst the
|
||||
s3c2410_gpio_pullup(x, 1) can be easily translated to the
|
||||
s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
|
||||
are not so easy.
|
||||
|
||||
The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
|
||||
of some of the devices, a pull-down) and as such the new API distinguishes
|
||||
between the UP and DOWN case. There is currently no 'just turn on' setting
|
||||
which may be required if this becomes a problem.
|
||||
|
||||
4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
|
||||
does not implicitly configure the relevant gpio to output. The gpio
|
||||
direction should be changed before using gpio_set_value().
|
||||
|
||||
5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
|
||||
has been set to input. It is currently unknown what the behaviour is
|
||||
when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
|
||||
would return the value the pin is supposed to be outputting).
|
||||
|
||||
6) s3c2410_gpio_getirq() should be directly replacable with the
|
||||
gpio_to_irq() call.
|
||||
|
||||
The s3c2410_gpio and gpio_ calls have always operated on the same gpio
|
||||
numberspace, so there is no problem with converting the gpio numbering
|
||||
between the calls.
|
||||
|
||||
|
||||
Headers
|
||||
|
|
@ -54,6 +108,11 @@ PIN Numbers
|
|||
eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
|
||||
the GPIO functions which pin is to be used.
|
||||
|
||||
With the conversion to gpiolib, there is no longer a direct conversion
|
||||
from gpio pin number to register base address as in earlier kernels. This
|
||||
is due to the number space required for newer SoCs where the later
|
||||
GPIOs are not contiguous.
|
||||
|
||||
|
||||
Configuring a pin
|
||||
-----------------
|
||||
|
|
@ -71,6 +130,8 @@ Configuring a pin
|
|||
which would turn GPA(0) into the lowest Address line A0, and set
|
||||
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
|
||||
|
||||
The s3c_gpio_cfgpin() call is a functional replacement for this call.
|
||||
|
||||
|
||||
Reading the current configuration
|
||||
---------------------------------
|
||||
|
|
@ -82,6 +143,9 @@ Reading the current configuration
|
|||
The return value will be from the same set of values which can be
|
||||
passed to s3c2410_gpio_cfgpin().
|
||||
|
||||
The s3c_gpio_getcfg() call should be a functional replacement for
|
||||
this call.
|
||||
|
||||
|
||||
Configuring a pull-up resistor
|
||||
------------------------------
|
||||
|
|
@ -95,6 +159,10 @@ Configuring a pull-up resistor
|
|||
Where the to value is zero to set the pull-up off, and 1 to enable
|
||||
the specified pull-up. Any other values are currently undefined.
|
||||
|
||||
The s3c_gpio_setpull() offers similar functionality, but with the
|
||||
ability to encode whether the pull is up or down. Currently there
|
||||
is no 'just on' state, so up or down must be selected.
|
||||
|
||||
|
||||
Getting the state of a PIN
|
||||
--------------------------
|
||||
|
|
@ -106,6 +174,9 @@ Getting the state of a PIN
|
|||
This will return either zero or non-zero. Do not count on this
|
||||
function returning 1 if the pin is set.
|
||||
|
||||
This call is now implemented by the relevant gpiolib calls, convert
|
||||
your board or driver to use gpiolib.
|
||||
|
||||
|
||||
Setting the state of a PIN
|
||||
--------------------------
|
||||
|
|
@ -117,6 +188,9 @@ Setting the state of a PIN
|
|||
Which sets the given pin to the value. Use 0 to write 0, and 1 to
|
||||
set the output to 1.
|
||||
|
||||
This call is now implemented by the relevant gpiolib calls, convert
|
||||
your board or driver to use gpiolib.
|
||||
|
||||
|
||||
Getting the IRQ number associated with a PIN
|
||||
--------------------------------------------
|
||||
|
|
@ -128,6 +202,9 @@ Getting the IRQ number associated with a PIN
|
|||
|
||||
Note, not all pins have an IRQ.
|
||||
|
||||
This call is now implemented by the relevant gpiolib calls, convert
|
||||
your board or driver to use gpiolib.
|
||||
|
||||
|
||||
Authour
|
||||
-------
|
||||
|
|
|
|||
|
|
@ -8,10 +8,16 @@ Introduction
|
|||
|
||||
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
|
||||
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
|
||||
S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
|
||||
S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices
|
||||
are supported.
|
||||
|
||||
Support for the S3C2400 and S3C24A0 series are in progress.
|
||||
|
||||
The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
|
||||
included under the arch/arm/mach-s3c2416 directory. Note, whilst core
|
||||
support for these SoCs is in, work on some of the extra peripherals
|
||||
and extra interrupts is still ongoing.
|
||||
|
||||
|
||||
Configuration
|
||||
-------------
|
||||
|
|
@ -209,6 +215,13 @@ GPIO
|
|||
Newer kernels carry GPIOLIB, and support is being moved towards
|
||||
this with some of the older support in line to be removed.
|
||||
|
||||
As of v2.6.34, the move towards using gpiolib support is almost
|
||||
complete, and very little of the old calls are left.
|
||||
|
||||
See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific
|
||||
support and Documentation/arm/Samsung/GPIO.txt for the core Samsung
|
||||
implementation.
|
||||
|
||||
|
||||
Clock Management
|
||||
----------------
|
||||
|
|
|
|||
|
|
@ -0,0 +1,42 @@
|
|||
Samsung GPIO implementation
|
||||
===========================
|
||||
|
||||
Introduction
|
||||
------------
|
||||
|
||||
This outlines the Samsung GPIO implementation and the architecture
|
||||
specfic calls provided alongisde the drivers/gpio core.
|
||||
|
||||
|
||||
S3C24XX (Legacy)
|
||||
----------------
|
||||
|
||||
See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
|
||||
about these devices. Their implementation is being brought into line
|
||||
with the core samsung implementation described in this document.
|
||||
|
||||
|
||||
GPIOLIB integration
|
||||
-------------------
|
||||
|
||||
The gpio implementation uses gpiolib as much as possible, only providing
|
||||
specific calls for the items that require Samsung specific handling, such
|
||||
as pin special-function or pull resistor control.
|
||||
|
||||
GPIO numbering is synchronised between the Samsung and gpiolib system.
|
||||
|
||||
|
||||
PIN configuration
|
||||
-----------------
|
||||
|
||||
Pin configuration is specific to the Samsung architecutre, with each SoC
|
||||
registering the necessary information for the core gpio configuration
|
||||
implementation to configure pins as necessary.
|
||||
|
||||
The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
|
||||
driver or machine to change gpio configuration.
|
||||
|
||||
See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
|
||||
on these functions.
|
||||
|
||||
|
||||
|
|
@ -13,9 +13,10 @@ Introduction
|
|||
|
||||
- S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
|
||||
- S3C64XX: S3C6400 and S3C6410
|
||||
- S5PC6440
|
||||
|
||||
S5PC100 and S5PC110 support is currently being merged
|
||||
- S5P6440
|
||||
- S5P6442
|
||||
- S5PC100
|
||||
- S5PC110 / S5PV210
|
||||
|
||||
|
||||
S3C24XX Systems
|
||||
|
|
@ -35,7 +36,10 @@ Configuration
|
|||
unifying all the SoCs into one kernel.
|
||||
|
||||
s5p6440_defconfig - S5P6440 specific default configuration
|
||||
s5p6442_defconfig - S5P6442 specific default configuration
|
||||
s5pc100_defconfig - S5PC100 specific default configuration
|
||||
s5pc110_defconfig - S5PC110 specific default configuration
|
||||
s5pv210_defconfig - S5PV210 specific default configuration
|
||||
|
||||
|
||||
Layout
|
||||
|
|
@ -50,18 +54,27 @@ Layout
|
|||
specific information. It contains the base clock, GPIO and device definitions
|
||||
to get the system running.
|
||||
|
||||
plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
|
||||
involved in other builds this will be phased out once the relevant code is
|
||||
moved elsewhere.
|
||||
|
||||
plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
|
||||
|
||||
plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs.
|
||||
|
||||
plat-s5p is for s5p specific builds, more to be added.
|
||||
plat-s5p is for s5p specific builds, and contains common support for the
|
||||
S5P specific systems. Not all S5Ps use all the features in this directory
|
||||
due to differences in the hardware.
|
||||
|
||||
|
||||
Layout changes
|
||||
--------------
|
||||
|
||||
The old plat-s3c and plat-s5pc1xx directories have been removed, with
|
||||
support moved to either plat-samsung or plat-s5p as necessary. These moves
|
||||
where to simplify the include and dependency issues involved with having
|
||||
so many different platform directories.
|
||||
|
||||
It was decided to remove plat-s5pc1xx as some of the support was already
|
||||
in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
|
||||
the only user was the S5PC100. The S5PC100 specific items where moved to
|
||||
arch/arm/mach-s5pc100.
|
||||
|
||||
|
||||
[ to finish ]
|
||||
|
||||
|
||||
Port Contributors
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.34
|
||||
# Wed May 26 19:04:29 2010
|
||||
# Fri May 28 19:15:48 2010
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_HAVE_PWM=y
|
||||
|
|
@ -250,12 +250,15 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
|
|||
CONFIG_S3C_LOWLEVEL_UART_PORT=0
|
||||
CONFIG_SAMSUNG_CLKSRC=y
|
||||
CONFIG_S3C_GPIO_CFG_S3C24XX=y
|
||||
CONFIG_S3C_GPIO_PULL_UPDOWN=y
|
||||
CONFIG_S3C_GPIO_PULL_UP=y
|
||||
CONFIG_SAMSUNG_GPIO_EXTRA=0
|
||||
CONFIG_S3C_GPIO_SPACE=0
|
||||
CONFIG_S3C_ADC=y
|
||||
CONFIG_S3C_DEV_HSMMC=y
|
||||
CONFIG_S3C_DEV_HSMMC1=y
|
||||
CONFIG_S3C_DEV_HWMON=y
|
||||
CONFIG_S3C_DEV_FB=y
|
||||
CONFIG_S3C_DEV_USB_HOST=y
|
||||
CONFIG_S3C_DEV_WDT=y
|
||||
CONFIG_S3C_DEV_NAND=y
|
||||
|
|
@ -322,11 +325,13 @@ CONFIG_MACH_SMDK2413=y
|
|||
CONFIG_MACH_S3C2413=y
|
||||
CONFIG_MACH_SMDK2412=y
|
||||
CONFIG_MACH_VSTMS=y
|
||||
CONFIG_CPU_S3C2416=y
|
||||
CONFIG_S3C2416_DMA=y
|
||||
|
||||
#
|
||||
# S3C2416 Machines
|
||||
#
|
||||
# CONFIG_MACH_SMDK2416 is not set
|
||||
CONFIG_MACH_SMDK2416=y
|
||||
CONFIG_CPU_S3C2440=y
|
||||
CONFIG_CPU_S3C2442=y
|
||||
CONFIG_CPU_S3C244X=y
|
||||
|
|
@ -338,9 +343,9 @@ CONFIG_S3C2440_DMA=y
|
|||
# S3C2440 and S3C2442 Machines
|
||||
#
|
||||
CONFIG_MACH_ANUBIS=y
|
||||
# CONFIG_MACH_NEO1973_GTA02 is not set
|
||||
CONFIG_MACH_NEO1973_GTA02=y
|
||||
CONFIG_MACH_OSIRIS=y
|
||||
# CONFIG_MACH_OSIRIS_DVS is not set
|
||||
CONFIG_MACH_OSIRIS_DVS=m
|
||||
CONFIG_MACH_RX3715=y
|
||||
CONFIG_ARCH_S3C2440=y
|
||||
CONFIG_MACH_NEXCODER_2440=y
|
||||
|
|
@ -348,7 +353,7 @@ CONFIG_SMDK2440_CPU2440=y
|
|||
CONFIG_SMDK2440_CPU2442=y
|
||||
CONFIG_MACH_AT2440EVB=y
|
||||
CONFIG_MACH_MINI2440=y
|
||||
# CONFIG_MACH_RX1950 is not set
|
||||
CONFIG_MACH_RX1950=y
|
||||
CONFIG_CPU_S3C2443=y
|
||||
CONFIG_S3C2443_DMA=y
|
||||
|
||||
|
|
@ -1302,6 +1307,7 @@ CONFIG_INPUT_POWERMATE=m
|
|||
CONFIG_INPUT_YEALINK=m
|
||||
CONFIG_INPUT_CM109=m
|
||||
CONFIG_INPUT_UINPUT=m
|
||||
# CONFIG_INPUT_PCF50633_PMU is not set
|
||||
# CONFIG_INPUT_PCF8574 is not set
|
||||
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
|
||||
|
||||
|
|
@ -1490,7 +1496,16 @@ CONFIG_GPIOLIB=y
|
|||
# AC97 GPIO expanders:
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
# CONFIG_POWER_SUPPLY is not set
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
# CONFIG_POWER_SUPPLY_DEBUG is not set
|
||||
# CONFIG_PDA_POWER is not set
|
||||
# CONFIG_APM_POWER is not set
|
||||
# CONFIG_TEST_POWER is not set
|
||||
# CONFIG_BATTERY_DS2760 is not set
|
||||
# CONFIG_BATTERY_DS2782 is not set
|
||||
# CONFIG_BATTERY_BQ27x00 is not set
|
||||
# CONFIG_BATTERY_MAX17040 is not set
|
||||
# CONFIG_CHARGER_PCF50633 is not set
|
||||
CONFIG_HWMON=y
|
||||
CONFIG_HWMON_VID=m
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
|
|
@ -1607,7 +1622,7 @@ CONFIG_MFD_SM501=y
|
|||
# CONFIG_HTC_PASIC3 is not set
|
||||
# CONFIG_HTC_I2CPLD is not set
|
||||
# CONFIG_UCB1400_CORE is not set
|
||||
# CONFIG_TPS65010 is not set
|
||||
CONFIG_TPS65010=m
|
||||
# CONFIG_TWL4030_CORE is not set
|
||||
# CONFIG_MFD_TMIO is not set
|
||||
# CONFIG_MFD_T7L66XB is not set
|
||||
|
|
@ -1620,8 +1635,10 @@ CONFIG_MFD_SM501=y
|
|||
# CONFIG_MFD_WM831X is not set
|
||||
# CONFIG_MFD_WM8350_I2C is not set
|
||||
# CONFIG_MFD_WM8994 is not set
|
||||
# CONFIG_MFD_PCF50633 is not set
|
||||
CONFIG_MFD_PCF50633=y
|
||||
# CONFIG_MFD_MC13783 is not set
|
||||
# CONFIG_PCF50633_ADC is not set
|
||||
CONFIG_PCF50633_GPIO=y
|
||||
# CONFIG_AB3100_CORE is not set
|
||||
# CONFIG_EZX_PCAP is not set
|
||||
# CONFIG_AB4500_CORE is not set
|
||||
|
|
@ -1737,6 +1754,7 @@ CONFIG_SND_S3C24XX_SOC_I2S=y
|
|||
CONFIG_SND_S3C_I2SV2_SOC=m
|
||||
CONFIG_SND_S3C2412_SOC_I2S=m
|
||||
CONFIG_SND_S3C_SOC_AC97=m
|
||||
# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set
|
||||
CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
|
||||
CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
|
||||
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
|
||||
|
|
@ -2045,6 +2063,7 @@ CONFIG_RTC_INTF_DEV=y
|
|||
# CONFIG_RTC_DRV_BQ4802 is not set
|
||||
# CONFIG_RTC_DRV_RP5C01 is not set
|
||||
# CONFIG_RTC_DRV_V3020 is not set
|
||||
# CONFIG_RTC_DRV_PCF50633 is not set
|
||||
|
||||
#
|
||||
# on-CPU RTC drivers
|
||||
|
|
|
|||
|
|
@ -1,9 +1,10 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.34
|
||||
# Wed May 26 19:04:30 2010
|
||||
# Fri May 28 19:05:39 2010
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_HAVE_PWM=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_TIME=y
|
||||
|
|
@ -253,12 +254,15 @@ CONFIG_S3C_GPIO_TRACK=y
|
|||
# CONFIG_S3C_ADC is not set
|
||||
CONFIG_S3C_DEV_HSMMC=y
|
||||
CONFIG_S3C_DEV_HSMMC1=y
|
||||
CONFIG_S3C_DEV_HSMMC2=y
|
||||
CONFIG_S3C_DEV_HWMON=y
|
||||
CONFIG_S3C_DEV_I2C1=y
|
||||
CONFIG_S3C_DEV_FB=y
|
||||
CONFIG_S3C_DEV_USB_HOST=y
|
||||
CONFIG_S3C_DEV_USB_HSOTG=y
|
||||
CONFIG_S3C_DEV_WDT=y
|
||||
CONFIG_S3C_DEV_NAND=y
|
||||
CONFIG_S3C_DEV_RTC=y
|
||||
CONFIG_SAMSUNG_DEV_ADC=y
|
||||
CONFIG_SAMSUNG_DEV_TS=y
|
||||
CONFIG_S3C_DMA=y
|
||||
|
|
@ -271,6 +275,7 @@ CONFIG_S3C_DMA=y
|
|||
# CONFIG_SAMSUNG_PM_CHECK is not set
|
||||
CONFIG_SAMSUNG_WAKEMASK=y
|
||||
CONFIG_PLAT_S3C64XX=y
|
||||
CONFIG_CPU_S3C6400=y
|
||||
CONFIG_CPU_S3C6410=y
|
||||
CONFIG_S3C64XX_DMA=y
|
||||
CONFIG_S3C64XX_SETUP_SDHCI=y
|
||||
|
|
@ -278,17 +283,18 @@ CONFIG_S3C64XX_SETUP_I2C0=y
|
|||
CONFIG_S3C64XX_SETUP_I2C1=y
|
||||
CONFIG_S3C64XX_SETUP_FB_24BPP=y
|
||||
CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
|
||||
# CONFIG_MACH_SMDK6400 is not set
|
||||
# CONFIG_MACH_ANW6410 is not set
|
||||
CONFIG_MACH_SMDK6400=y
|
||||
CONFIG_MACH_ANW6410=y
|
||||
CONFIG_MACH_SMDK6410=y
|
||||
CONFIG_SMDK6410_SD_CH0=y
|
||||
# CONFIG_SMDK6410_SD_CH1 is not set
|
||||
# CONFIG_SMDK6410_WM1190_EV1 is not set
|
||||
# CONFIG_SMDK6410_WM1192_EV1 is not set
|
||||
# CONFIG_MACH_NCP is not set
|
||||
# CONFIG_MACH_HMT is not set
|
||||
# CONFIG_MACH_SMARTQ5 is not set
|
||||
# CONFIG_MACH_SMARTQ7 is not set
|
||||
CONFIG_MACH_NCP=y
|
||||
CONFIG_MACH_HMT=y
|
||||
CONFIG_MACH_SMARTQ=y
|
||||
CONFIG_MACH_SMARTQ5=y
|
||||
CONFIG_MACH_SMARTQ7=y
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
|
|
@ -475,6 +481,9 @@ CONFIG_MTD_CFI_I2=y
|
|||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_DATAFLASH is not set
|
||||
# CONFIG_MTD_M25P80 is not set
|
||||
# CONFIG_MTD_SST25L is not set
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
|
|
@ -501,6 +510,7 @@ CONFIG_MTD_NAND_S3C2410=y
|
|||
# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
|
||||
# CONFIG_MTD_NAND_DISKONCHIP is not set
|
||||
# CONFIG_MTD_NAND_PLATFORM is not set
|
||||
# CONFIG_MTD_ALAUDA is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
|
||||
#
|
||||
|
|
@ -521,6 +531,7 @@ CONFIG_BLK_DEV_LOOP=y
|
|||
#
|
||||
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
|
||||
#
|
||||
# CONFIG_BLK_DEV_UB is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
|
|
@ -534,12 +545,14 @@ CONFIG_MISC_DEVICES=y
|
|||
# CONFIG_ISL29003 is not set
|
||||
# CONFIG_SENSORS_TSL2550 is not set
|
||||
# CONFIG_DS1682 is not set
|
||||
# CONFIG_TI_DAC7512 is not set
|
||||
# CONFIG_C2PORT is not set
|
||||
|
||||
#
|
||||
# EEPROM support
|
||||
#
|
||||
CONFIG_EEPROM_AT24=y
|
||||
# CONFIG_EEPROM_AT25 is not set
|
||||
# CONFIG_EEPROM_LEGACY is not set
|
||||
# CONFIG_EEPROM_MAX6875 is not set
|
||||
# CONFIG_EEPROM_93CX6 is not set
|
||||
|
|
@ -654,6 +667,7 @@ CONFIG_SERIAL_SAMSUNG_UARTS=4
|
|||
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
|
||||
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
|
||||
CONFIG_SERIAL_S3C6400=y
|
||||
# CONFIG_SERIAL_MAX3100 is not set
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_TIMBERDALE is not set
|
||||
|
|
@ -694,6 +708,7 @@ CONFIG_I2C_S3C2410=y
|
|||
#
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_TAOS_EVM is not set
|
||||
# CONFIG_I2C_TINY_USB is not set
|
||||
|
||||
#
|
||||
# Other I2C/SMBus bus drivers
|
||||
|
|
@ -703,7 +718,24 @@ CONFIG_I2C_S3C2410=y
|
|||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
# CONFIG_SPI is not set
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_DEBUG is not set
|
||||
CONFIG_SPI_MASTER=y
|
||||
|
||||
#
|
||||
# SPI Master Controller Drivers
|
||||
#
|
||||
CONFIG_SPI_BITBANG=m
|
||||
CONFIG_SPI_GPIO=m
|
||||
CONFIG_SPI_S3C64XX=m
|
||||
# CONFIG_SPI_XILINX is not set
|
||||
# CONFIG_SPI_DESIGNWARE is not set
|
||||
|
||||
#
|
||||
# SPI Protocol Masters
|
||||
#
|
||||
# CONFIG_SPI_SPIDEV is not set
|
||||
# CONFIG_SPI_TLE62X0 is not set
|
||||
|
||||
#
|
||||
# PPS support
|
||||
|
|
@ -735,6 +767,9 @@ CONFIG_GPIOLIB=y
|
|||
#
|
||||
# SPI GPIO expanders:
|
||||
#
|
||||
# CONFIG_GPIO_MAX7301 is not set
|
||||
# CONFIG_GPIO_MCP23S08 is not set
|
||||
# CONFIG_GPIO_MC33880 is not set
|
||||
|
||||
#
|
||||
# AC97 GPIO expanders:
|
||||
|
|
@ -750,6 +785,7 @@ CONFIG_HWMON=y
|
|||
#
|
||||
# CONFIG_SENSORS_AD7414 is not set
|
||||
# CONFIG_SENSORS_AD7418 is not set
|
||||
# CONFIG_SENSORS_ADCXX is not set
|
||||
# CONFIG_SENSORS_ADM1021 is not set
|
||||
# CONFIG_SENSORS_ADM1025 is not set
|
||||
# CONFIG_SENSORS_ADM1026 is not set
|
||||
|
|
@ -771,6 +807,7 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_GL520SM is not set
|
||||
# CONFIG_SENSORS_IT87 is not set
|
||||
# CONFIG_SENSORS_LM63 is not set
|
||||
# CONFIG_SENSORS_LM70 is not set
|
||||
# CONFIG_SENSORS_LM73 is not set
|
||||
# CONFIG_SENSORS_LM75 is not set
|
||||
# CONFIG_SENSORS_LM77 is not set
|
||||
|
|
@ -785,6 +822,7 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_LTC4215 is not set
|
||||
# CONFIG_SENSORS_LTC4245 is not set
|
||||
# CONFIG_SENSORS_LM95241 is not set
|
||||
# CONFIG_SENSORS_MAX1111 is not set
|
||||
# CONFIG_SENSORS_MAX1619 is not set
|
||||
# CONFIG_SENSORS_MAX6650 is not set
|
||||
# CONFIG_SENSORS_PC87360 is not set
|
||||
|
|
@ -796,6 +834,7 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_SMSC47M192 is not set
|
||||
# CONFIG_SENSORS_SMSC47B397 is not set
|
||||
# CONFIG_SENSORS_ADS7828 is not set
|
||||
# CONFIG_SENSORS_ADS7871 is not set
|
||||
# CONFIG_SENSORS_AMC6821 is not set
|
||||
# CONFIG_SENSORS_THMC50 is not set
|
||||
# CONFIG_SENSORS_TMP401 is not set
|
||||
|
|
@ -809,6 +848,7 @@ CONFIG_HWMON=y
|
|||
# CONFIG_SENSORS_W83L786NG is not set
|
||||
# CONFIG_SENSORS_W83627HF is not set
|
||||
# CONFIG_SENSORS_W83627EHF is not set
|
||||
# CONFIG_SENSORS_LIS3_SPI is not set
|
||||
# CONFIG_SENSORS_LIS3_I2C is not set
|
||||
# CONFIG_THERMAL is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
|
|
@ -845,7 +885,10 @@ CONFIG_SSB_POSSIBLE=y
|
|||
# CONFIG_MFD_WM8350_I2C is not set
|
||||
# CONFIG_MFD_WM8994 is not set
|
||||
# CONFIG_MFD_PCF50633 is not set
|
||||
# CONFIG_MFD_MC13783 is not set
|
||||
# CONFIG_AB3100_CORE is not set
|
||||
# CONFIG_EZX_PCAP is not set
|
||||
# CONFIG_AB4500_CORE is not set
|
||||
# CONFIG_REGULATOR is not set
|
||||
# CONFIG_MEDIA_SUPPORT is not set
|
||||
|
||||
|
|
@ -854,8 +897,47 @@ CONFIG_SSB_POSSIBLE=y
|
|||
#
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||
# CONFIG_FB is not set
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
CONFIG_FB=y
|
||||
# CONFIG_FIRMWARE_EDID is not set
|
||||
# CONFIG_FB_DDC is not set
|
||||
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
|
||||
CONFIG_FB_CFB_FILLRECT=y
|
||||
CONFIG_FB_CFB_COPYAREA=y
|
||||
CONFIG_FB_CFB_IMAGEBLIT=y
|
||||
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
|
||||
# CONFIG_FB_SYS_FILLRECT is not set
|
||||
# CONFIG_FB_SYS_COPYAREA is not set
|
||||
# CONFIG_FB_SYS_IMAGEBLIT is not set
|
||||
# CONFIG_FB_FOREIGN_ENDIAN is not set
|
||||
# CONFIG_FB_SYS_FOPS is not set
|
||||
# CONFIG_FB_SVGALIB is not set
|
||||
# CONFIG_FB_MACMODES is not set
|
||||
# CONFIG_FB_BACKLIGHT is not set
|
||||
# CONFIG_FB_MODE_HELPERS is not set
|
||||
# CONFIG_FB_TILEBLITTING is not set
|
||||
|
||||
#
|
||||
# Frame buffer hardware drivers
|
||||
#
|
||||
# CONFIG_FB_S1D13XXX is not set
|
||||
CONFIG_FB_S3C=y
|
||||
# CONFIG_FB_S3C_DEBUG_REGWRITE is not set
|
||||
# CONFIG_FB_VIRTUAL is not set
|
||||
# CONFIG_FB_METRONOME is not set
|
||||
# CONFIG_FB_MB862XX is not set
|
||||
# CONFIG_FB_BROADSHEET is not set
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
# CONFIG_LCD_L4F00242T03 is not set
|
||||
# CONFIG_LCD_LMS283GF05 is not set
|
||||
CONFIG_LCD_LTV350QV=y
|
||||
# CONFIG_LCD_ILI9320 is not set
|
||||
# CONFIG_LCD_TDO24M is not set
|
||||
# CONFIG_LCD_VGG2432A4 is not set
|
||||
# CONFIG_LCD_PLATFORM is not set
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_GENERIC=y
|
||||
CONFIG_BACKLIGHT_PWM=y
|
||||
|
||||
#
|
||||
# Display device support
|
||||
|
|
@ -867,6 +949,8 @@ CONFIG_SSB_POSSIBLE=y
|
|||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE is not set
|
||||
# CONFIG_LOGO is not set
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SOUND_OSS_CORE=y
|
||||
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
|
||||
|
|
@ -895,6 +979,11 @@ CONFIG_SND_DRIVERS=y
|
|||
# CONFIG_SND_SERIAL_U16550 is not set
|
||||
# CONFIG_SND_MPU401 is not set
|
||||
CONFIG_SND_ARM=y
|
||||
CONFIG_SND_SPI=y
|
||||
CONFIG_SND_USB=y
|
||||
# CONFIG_SND_USB_AUDIO is not set
|
||||
# CONFIG_SND_USB_UA101 is not set
|
||||
# CONFIG_SND_USB_CAIAQ is not set
|
||||
CONFIG_SND_SOC=m
|
||||
CONFIG_SND_SOC_AC97_BUS=y
|
||||
CONFIG_SND_S3C24XX_SOC=m
|
||||
|
|
@ -909,29 +998,197 @@ CONFIG_AC97_BUS=m
|
|||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HID=y
|
||||
# CONFIG_HIDRAW is not set
|
||||
|
||||
#
|
||||
# USB Input Devices
|
||||
#
|
||||
CONFIG_USB_HID=y
|
||||
# CONFIG_HID_PID is not set
|
||||
# CONFIG_USB_HIDDEV is not set
|
||||
|
||||
#
|
||||
# Special HID drivers
|
||||
#
|
||||
# CONFIG_HID_3M_PCT is not set
|
||||
CONFIG_HID_A4TECH=y
|
||||
CONFIG_HID_APPLE=y
|
||||
CONFIG_HID_BELKIN=y
|
||||
# CONFIG_HID_CANDO is not set
|
||||
CONFIG_HID_CHERRY=y
|
||||
CONFIG_HID_CHICONY=y
|
||||
# CONFIG_HID_PRODIKEYS is not set
|
||||
CONFIG_HID_CYPRESS=y
|
||||
# CONFIG_HID_DRAGONRISE is not set
|
||||
# CONFIG_HID_EGALAX is not set
|
||||
CONFIG_HID_EZKEY=y
|
||||
CONFIG_HID_KYE=y
|
||||
# CONFIG_HID_GYRATION is not set
|
||||
# CONFIG_HID_TWINHAN is not set
|
||||
CONFIG_HID_KENSINGTON=y
|
||||
CONFIG_HID_LOGITECH=y
|
||||
# CONFIG_LOGITECH_FF is not set
|
||||
# CONFIG_LOGIRUMBLEPAD2_FF is not set
|
||||
# CONFIG_LOGIG940_FF is not set
|
||||
CONFIG_HID_MICROSOFT=y
|
||||
# CONFIG_HID_MOSART is not set
|
||||
CONFIG_HID_MONTEREY=y
|
||||
# CONFIG_HID_NTRIG is not set
|
||||
# CONFIG_HID_ORTEK is not set
|
||||
# CONFIG_HID_PANTHERLORD is not set
|
||||
# CONFIG_HID_PETALYNX is not set
|
||||
# CONFIG_HID_PICOLCD is not set
|
||||
# CONFIG_HID_QUANTA is not set
|
||||
# CONFIG_HID_ROCCAT_KONE is not set
|
||||
# CONFIG_HID_SAMSUNG is not set
|
||||
# CONFIG_HID_SONY is not set
|
||||
# CONFIG_HID_STANTUM is not set
|
||||
# CONFIG_HID_SUNPLUS is not set
|
||||
# CONFIG_HID_GREENASIA is not set
|
||||
# CONFIG_HID_SMARTJOYPLUS is not set
|
||||
# CONFIG_HID_TOPSEED is not set
|
||||
# CONFIG_HID_THRUSTMASTER is not set
|
||||
# CONFIG_HID_ZEROPLUS is not set
|
||||
# CONFIG_HID_ZYDACRON is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB is not set
|
||||
CONFIG_USB=y
|
||||
# CONFIG_USB_DEBUG is not set
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
|
||||
#
|
||||
# Enable Host or Gadget support to see Inventra options
|
||||
# Miscellaneous USB options
|
||||
#
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
CONFIG_USB_DEVICE_CLASS=y
|
||||
# CONFIG_USB_DYNAMIC_MINORS is not set
|
||||
# CONFIG_USB_MON is not set
|
||||
# CONFIG_USB_WUSB is not set
|
||||
# CONFIG_USB_WUSB_CBAF is not set
|
||||
|
||||
#
|
||||
# USB Host Controller Drivers
|
||||
#
|
||||
# CONFIG_USB_C67X00_HCD is not set
|
||||
# CONFIG_USB_OXU210HP_HCD is not set
|
||||
# CONFIG_USB_ISP116X_HCD is not set
|
||||
# CONFIG_USB_ISP1760_HCD is not set
|
||||
# CONFIG_USB_ISP1362_HCD is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
||||
# CONFIG_USB_SL811_HCD is not set
|
||||
# CONFIG_USB_R8A66597_HCD is not set
|
||||
# CONFIG_USB_HWA_HCD is not set
|
||||
# CONFIG_USB_MUSB_HDRC is not set
|
||||
|
||||
#
|
||||
# USB Device Class drivers
|
||||
#
|
||||
CONFIG_USB_ACM=m
|
||||
CONFIG_USB_PRINTER=m
|
||||
# CONFIG_USB_WDM is not set
|
||||
# CONFIG_USB_TMC is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
|
||||
#
|
||||
|
||||
#
|
||||
# also be needed; see USB_STORAGE Help for more info
|
||||
#
|
||||
# CONFIG_USB_LIBUSUAL is not set
|
||||
|
||||
#
|
||||
# USB Imaging devices
|
||||
#
|
||||
# CONFIG_USB_MDC800 is not set
|
||||
|
||||
#
|
||||
# USB port drivers
|
||||
#
|
||||
CONFIG_USB_SERIAL=m
|
||||
# CONFIG_USB_EZUSB is not set
|
||||
CONFIG_USB_SERIAL_GENERIC=y
|
||||
# CONFIG_USB_SERIAL_AIRCABLE is not set
|
||||
# CONFIG_USB_SERIAL_ARK3116 is not set
|
||||
# CONFIG_USB_SERIAL_BELKIN is not set
|
||||
# CONFIG_USB_SERIAL_CH341 is not set
|
||||
# CONFIG_USB_SERIAL_WHITEHEAT is not set
|
||||
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
|
||||
# CONFIG_USB_SERIAL_CP210X is not set
|
||||
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
|
||||
CONFIG_USB_SERIAL_EMPEG=m
|
||||
CONFIG_USB_SERIAL_FTDI_SIO=m
|
||||
# CONFIG_USB_SERIAL_FUNSOFT is not set
|
||||
# CONFIG_USB_SERIAL_VISOR is not set
|
||||
# CONFIG_USB_SERIAL_IPAQ is not set
|
||||
# CONFIG_USB_SERIAL_IR is not set
|
||||
# CONFIG_USB_SERIAL_EDGEPORT is not set
|
||||
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
|
||||
# CONFIG_USB_SERIAL_GARMIN is not set
|
||||
# CONFIG_USB_SERIAL_IPW is not set
|
||||
# CONFIG_USB_SERIAL_IUU is not set
|
||||
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
|
||||
# CONFIG_USB_SERIAL_KEYSPAN is not set
|
||||
# CONFIG_USB_SERIAL_KLSI is not set
|
||||
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
|
||||
# CONFIG_USB_SERIAL_MCT_U232 is not set
|
||||
# CONFIG_USB_SERIAL_MOS7720 is not set
|
||||
# CONFIG_USB_SERIAL_MOS7840 is not set
|
||||
# CONFIG_USB_SERIAL_MOTOROLA is not set
|
||||
# CONFIG_USB_SERIAL_NAVMAN is not set
|
||||
CONFIG_USB_SERIAL_PL2303=m
|
||||
# CONFIG_USB_SERIAL_OTI6858 is not set
|
||||
# CONFIG_USB_SERIAL_QCAUX is not set
|
||||
# CONFIG_USB_SERIAL_QUALCOMM is not set
|
||||
# CONFIG_USB_SERIAL_SPCP8X5 is not set
|
||||
# CONFIG_USB_SERIAL_HP4X is not set
|
||||
# CONFIG_USB_SERIAL_SAFE is not set
|
||||
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
|
||||
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
|
||||
# CONFIG_USB_SERIAL_SYMBOL is not set
|
||||
# CONFIG_USB_SERIAL_TI is not set
|
||||
# CONFIG_USB_SERIAL_CYBERJACK is not set
|
||||
# CONFIG_USB_SERIAL_XIRCOM is not set
|
||||
# CONFIG_USB_SERIAL_OPTION is not set
|
||||
# CONFIG_USB_SERIAL_OMNINET is not set
|
||||
# CONFIG_USB_SERIAL_OPTICON is not set
|
||||
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
|
||||
# CONFIG_USB_SERIAL_ZIO is not set
|
||||
# CONFIG_USB_SERIAL_DEBUG is not set
|
||||
|
||||
#
|
||||
# USB Miscellaneous drivers
|
||||
#
|
||||
# CONFIG_USB_EMI62 is not set
|
||||
# CONFIG_USB_EMI26 is not set
|
||||
# CONFIG_USB_ADUTUX is not set
|
||||
# CONFIG_USB_SEVSEG is not set
|
||||
# CONFIG_USB_RIO500 is not set
|
||||
# CONFIG_USB_LEGOTOWER is not set
|
||||
# CONFIG_USB_LCD is not set
|
||||
# CONFIG_USB_LED is not set
|
||||
# CONFIG_USB_CYPRESS_CY7C63 is not set
|
||||
# CONFIG_USB_CYTHERM is not set
|
||||
# CONFIG_USB_IDMOUSE is not set
|
||||
# CONFIG_USB_FTDI_ELAN is not set
|
||||
# CONFIG_USB_APPLEDISPLAY is not set
|
||||
# CONFIG_USB_LD is not set
|
||||
# CONFIG_USB_TRANCEVIBRATOR is not set
|
||||
# CONFIG_USB_IOWARRIOR is not set
|
||||
# CONFIG_USB_TEST is not set
|
||||
# CONFIG_USB_ISIGHTFW is not set
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# OTG and related infrastructure
|
||||
#
|
||||
# CONFIG_USB_GPIO_VBUS is not set
|
||||
# CONFIG_USB_ULPI is not set
|
||||
# CONFIG_NOP_USB_XCEIV is not set
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_DEBUG=y
|
||||
CONFIG_MMC_UNSAFE_RESUME=y
|
||||
|
|
@ -951,11 +1208,77 @@ CONFIG_MMC_SDHCI=y
|
|||
# CONFIG_MMC_SDHCI_PLTFM is not set
|
||||
CONFIG_MMC_SDHCI_S3C=y
|
||||
# CONFIG_MMC_SDHCI_S3C_DMA is not set
|
||||
# CONFIG_MMC_SPI is not set
|
||||
# CONFIG_MEMSTICK is not set
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
# CONFIG_ACCESSIBILITY is not set
|
||||
CONFIG_RTC_LIB=y
|
||||
# CONFIG_RTC_CLASS is not set
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_HCTOSYS=y
|
||||
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
|
||||
# CONFIG_RTC_DEBUG is not set
|
||||
|
||||
#
|
||||
# RTC interfaces
|
||||
#
|
||||
CONFIG_RTC_INTF_SYSFS=y
|
||||
CONFIG_RTC_INTF_PROC=y
|
||||
CONFIG_RTC_INTF_DEV=y
|
||||
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
|
||||
# CONFIG_RTC_DRV_TEST is not set
|
||||
|
||||
#
|
||||
# I2C RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_DS1307 is not set
|
||||
# CONFIG_RTC_DRV_DS1374 is not set
|
||||
# CONFIG_RTC_DRV_DS1672 is not set
|
||||
# CONFIG_RTC_DRV_MAX6900 is not set
|
||||
# CONFIG_RTC_DRV_RS5C372 is not set
|
||||
# CONFIG_RTC_DRV_ISL1208 is not set
|
||||
# CONFIG_RTC_DRV_X1205 is not set
|
||||
# CONFIG_RTC_DRV_PCF8563 is not set
|
||||
# CONFIG_RTC_DRV_PCF8583 is not set
|
||||
# CONFIG_RTC_DRV_M41T80 is not set
|
||||
# CONFIG_RTC_DRV_BQ32K is not set
|
||||
# CONFIG_RTC_DRV_S35390A is not set
|
||||
# CONFIG_RTC_DRV_FM3130 is not set
|
||||
# CONFIG_RTC_DRV_RX8581 is not set
|
||||
# CONFIG_RTC_DRV_RX8025 is not set
|
||||
|
||||
#
|
||||
# SPI RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_M41T94 is not set
|
||||
# CONFIG_RTC_DRV_DS1305 is not set
|
||||
# CONFIG_RTC_DRV_DS1390 is not set
|
||||
# CONFIG_RTC_DRV_MAX6902 is not set
|
||||
# CONFIG_RTC_DRV_R9701 is not set
|
||||
# CONFIG_RTC_DRV_RS5C348 is not set
|
||||
# CONFIG_RTC_DRV_DS3234 is not set
|
||||
# CONFIG_RTC_DRV_PCF2123 is not set
|
||||
|
||||
#
|
||||
# Platform RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_CMOS is not set
|
||||
# CONFIG_RTC_DRV_DS1286 is not set
|
||||
# CONFIG_RTC_DRV_DS1511 is not set
|
||||
# CONFIG_RTC_DRV_DS1553 is not set
|
||||
# CONFIG_RTC_DRV_DS1742 is not set
|
||||
# CONFIG_RTC_DRV_STK17TA8 is not set
|
||||
# CONFIG_RTC_DRV_M48T86 is not set
|
||||
# CONFIG_RTC_DRV_M48T35 is not set
|
||||
# CONFIG_RTC_DRV_M48T59 is not set
|
||||
# CONFIG_RTC_DRV_MSM6242 is not set
|
||||
# CONFIG_RTC_DRV_BQ4802 is not set
|
||||
# CONFIG_RTC_DRV_RP5C01 is not set
|
||||
# CONFIG_RTC_DRV_V3020 is not set
|
||||
|
||||
#
|
||||
# on-CPU RTC drivers
|
||||
#
|
||||
CONFIG_RTC_DRV_S3C=y
|
||||
# CONFIG_DMADEVICES is not set
|
||||
# CONFIG_AUXDISPLAY is not set
|
||||
# CONFIG_UIO is not set
|
||||
|
|
@ -1052,7 +1375,46 @@ CONFIG_ROMFS_ON_BLOCK=y
|
|||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
# CONFIG_NLS is not set
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
# CONFIG_NLS_CODEPAGE_437 is not set
|
||||
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||
# CONFIG_NLS_CODEPAGE_850 is not set
|
||||
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||
# CONFIG_NLS_CODEPAGE_860 is not set
|
||||
# CONFIG_NLS_CODEPAGE_861 is not set
|
||||
# CONFIG_NLS_CODEPAGE_862 is not set
|
||||
# CONFIG_NLS_CODEPAGE_863 is not set
|
||||
# CONFIG_NLS_CODEPAGE_864 is not set
|
||||
# CONFIG_NLS_CODEPAGE_865 is not set
|
||||
# CONFIG_NLS_CODEPAGE_866 is not set
|
||||
# CONFIG_NLS_CODEPAGE_869 is not set
|
||||
# CONFIG_NLS_CODEPAGE_936 is not set
|
||||
# CONFIG_NLS_CODEPAGE_950 is not set
|
||||
# CONFIG_NLS_CODEPAGE_932 is not set
|
||||
# CONFIG_NLS_CODEPAGE_949 is not set
|
||||
# CONFIG_NLS_CODEPAGE_874 is not set
|
||||
# CONFIG_NLS_ISO8859_8 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||
# CONFIG_NLS_ASCII is not set
|
||||
# CONFIG_NLS_ISO8859_1 is not set
|
||||
# CONFIG_NLS_ISO8859_2 is not set
|
||||
# CONFIG_NLS_ISO8859_3 is not set
|
||||
# CONFIG_NLS_ISO8859_4 is not set
|
||||
# CONFIG_NLS_ISO8859_5 is not set
|
||||
# CONFIG_NLS_ISO8859_6 is not set
|
||||
# CONFIG_NLS_ISO8859_7 is not set
|
||||
# CONFIG_NLS_ISO8859_9 is not set
|
||||
# CONFIG_NLS_ISO8859_13 is not set
|
||||
# CONFIG_NLS_ISO8859_14 is not set
|
||||
# CONFIG_NLS_ISO8859_15 is not set
|
||||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
|
|
|
|||
|
|
@ -258,6 +258,12 @@ static struct clk init_clocks[] = {
|
|||
.parent = &clk_h,
|
||||
.enable = s3c64xx_hclk_ctrl,
|
||||
.ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
|
||||
}, {
|
||||
.name = "otg",
|
||||
.id = -1,
|
||||
.parent = &clk_h,
|
||||
.enable = s3c64xx_hclk_ctrl,
|
||||
.ctrlbit = S3C_CLKCON_HCLK_USB,
|
||||
}, {
|
||||
.name = "timers",
|
||||
.id = -1,
|
||||
|
|
|
|||
|
|
@ -148,6 +148,7 @@ static struct clk *s5p_clks[] __initdata = {
|
|||
&clk_fout_vpll,
|
||||
&clk_arm,
|
||||
&clk_vpll,
|
||||
&clk_xusbxti,
|
||||
};
|
||||
|
||||
void __init s5p_register_clocks(unsigned long xtal_freq)
|
||||
|
|
|
|||
|
|
@ -43,6 +43,11 @@ struct s3c_gpio_chip;
|
|||
* layouts. Provide an point to vector control routine and provide any
|
||||
* per-bank configuration information that other systems such as the
|
||||
* external interrupt code will need.
|
||||
*
|
||||
* @sa s3c_gpio_cfgpin
|
||||
* @sa s3c_gpio_getcfg
|
||||
* @sa s3c_gpio_setpull
|
||||
* @sa s3c_gpio_getpull
|
||||
*/
|
||||
struct s3c_gpio_cfg {
|
||||
unsigned int cfg_eint;
|
||||
|
|
@ -70,11 +75,25 @@ struct s3c_gpio_cfg {
|
|||
/**
|
||||
* s3c_gpio_cfgpin() - Change the GPIO function of a pin.
|
||||
* @pin pin The pin number to configure.
|
||||
* @pin to The configuration for the pin's function.
|
||||
* @to to The configuration for the pin's function.
|
||||
*
|
||||
* Configure which function is actually connected to the external
|
||||
* pin, such as an gpio input, output or some form of special function
|
||||
* connected to an internal peripheral block.
|
||||
*
|
||||
* The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
|
||||
* or S3C_GPIO_SFN() to indicate one of the possible values that the helper
|
||||
* will then generate the correct bit mask and shift for the configuration.
|
||||
*
|
||||
* If a bank of GPIOs all needs to be set to special-function 2, then
|
||||
* the following code will work:
|
||||
*
|
||||
* for (gpio = start; gpio < end; gpio++)
|
||||
* s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
|
||||
*
|
||||
* The @to parameter can also be a specific value already shifted to the
|
||||
* correct position in the control register, although these are discouraged
|
||||
* in newer kernels and are only being kept for compatibility.
|
||||
*/
|
||||
extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
|
||||
|
||||
|
|
@ -108,6 +127,8 @@ extern unsigned s3c_gpio_getcfg(unsigned int pin);
|
|||
* This function sets the state of the pull-{up,down} resistor for the
|
||||
* specified pin. It will return 0 if successfull, or a negative error
|
||||
* code if the pin cannot support the requested pull setting.
|
||||
*
|
||||
* @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
|
||||
*/
|
||||
extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
|
||||
|
||||
|
|
|
|||
|
|
@ -119,7 +119,7 @@ static int s5p_serial_probe(struct platform_device *pdev)
|
|||
return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
|
||||
}
|
||||
|
||||
static struct platform_driver s5p_serial_drv = {
|
||||
static struct platform_driver s5p_serial_driver = {
|
||||
.probe = s5p_serial_probe,
|
||||
.remove = __devexit_p(s3c24xx_serial_remove),
|
||||
.driver = {
|
||||
|
|
@ -130,19 +130,19 @@ static struct platform_driver s5p_serial_drv = {
|
|||
|
||||
static int __init s5pv210_serial_console_init(void)
|
||||
{
|
||||
return s3c24xx_serial_initconsole(&s5p_serial_drv, s5p_uart_inf);
|
||||
return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf);
|
||||
}
|
||||
|
||||
console_initcall(s5pv210_serial_console_init);
|
||||
|
||||
static int __init s5p_serial_init(void)
|
||||
{
|
||||
return s3c24xx_serial_init(&s5p_serial_drv, *s5p_uart_inf);
|
||||
return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
|
||||
}
|
||||
|
||||
static void __exit s5p_serial_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&s5p_serial_drv);
|
||||
platform_driver_unregister(&s5p_serial_driver);
|
||||
}
|
||||
|
||||
module_init(s5p_serial_init);
|
||||
|
|
|
|||
Loading…
Reference in New Issue