Merge 4.14-rc6 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2017-10-23 14:24:37 +02:00
commit 0520d37bb3
312 changed files with 3641 additions and 1503 deletions

View File

@ -14,3 +14,11 @@ Description:
Show or set the gain boost of the amp, from 0-31 range.
18 = indoors (default)
14 = outdoors
What /sys/bus/iio/devices/iio:deviceX/noise_level_tripped
Date: May 2017
KernelVersion: 4.13
Contact: Matt Ranostay <matt.ranostay@konsulko.com>
Description:
When 1 the noise level is over the trip level and not reporting
valid data

View File

@ -352,44 +352,30 @@ Read-Copy Update (RCU)
----------------------
.. kernel-doc:: include/linux/rcupdate.h
:external:
.. kernel-doc:: include/linux/rcupdate_wait.h
:external:
.. kernel-doc:: include/linux/rcutree.h
:external:
.. kernel-doc:: kernel/rcu/tree.c
:external:
.. kernel-doc:: kernel/rcu/tree_plugin.h
:external:
.. kernel-doc:: kernel/rcu/tree_exp.h
:external:
.. kernel-doc:: kernel/rcu/update.c
:external:
.. kernel-doc:: include/linux/srcu.h
:external:
.. kernel-doc:: kernel/rcu/srcutree.c
:external:
.. kernel-doc:: include/linux/rculist_bl.h
:external:
.. kernel-doc:: include/linux/rculist.h
:external:
.. kernel-doc:: include/linux/rculist_nulls.h
:external:
.. kernel-doc:: include/linux/rcu_sync.h
:external:
.. kernel-doc:: kernel/rcu/sync.c
:external:

View File

@ -16,6 +16,10 @@ Optional properties:
- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
value 0 - 120pF. This will require using the calibration data from
the manufacturer.
- ams,nflwdth: Set the noise and watchdog threshold register on
startup. This will need to set according to the noise from the
MCU board, and possibly the local environment. Refer to the
datasheet for the threshold settings.
Example:
@ -27,4 +31,5 @@ as3935@0 {
interrupt-parent = <&gpio1>;
interrupts = <16 1>;
ams,tuning-capacitor-pf = <80>;
ams,nflwdth = <0x44>;
};

View File

@ -99,7 +99,7 @@ Examples:
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x0 0x2c200000 0 0x200000>;
reg = <0x0 0x2c200000 0 0x20000>;
};
};
@ -124,14 +124,14 @@ Examples:
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x0 0x2c200000 0 0x200000>;
reg = <0x0 0x2c200000 0 0x20000>;
};
gic-its@2c400000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x0 0x2c400000 0 0x200000>;
reg = <0x0 0x2c400000 0 0x20000>;
};
ppi-partitions {

View File

@ -25,6 +25,7 @@ Below are the essential guides that every developer should read.
submitting-patches
coding-style
email-clients
kernel-enforcement-statement
Other guides to the community that are of interest to most developers are:

View File

@ -0,0 +1,147 @@
Linux Kernel Enforcement Statement
----------------------------------
As developers of the Linux kernel, we have a keen interest in how our software
is used and how the license for our software is enforced. Compliance with the
reciprocal sharing obligations of GPL-2.0 is critical to the long-term
sustainability of our software and community.
Although there is a right to enforce the separate copyright interests in the
contributions made to our community, we share an interest in ensuring that
individual enforcement actions are conducted in a manner that benefits our
community and do not have an unintended negative impact on the health and
growth of our software ecosystem. In order to deter unhelpful enforcement
actions, we agree that it is in the best interests of our development
community to undertake the following commitment to users of the Linux kernel
on behalf of ourselves and any successors to our copyright interests:
Notwithstanding the termination provisions of the GPL-2.0, we agree that
it is in the best interests of our development community to adopt the
following provisions of GPL-3.0 as additional permissions under our
license with respect to any non-defensive assertion of rights under the
license.
However, if you cease all violation of this License, then your license
from a particular copyright holder is reinstated (a) provisionally,
unless and until the copyright holder explicitly and finally
terminates your license, and (b) permanently, if the copyright holder
fails to notify you of the violation by some reasonable means prior to
60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Our intent in providing these assurances is to encourage more use of the
software. We want companies and individuals to use, modify and distribute
this software. We want to work with users in an open and transparent way to
eliminate any uncertainty about our expectations regarding compliance or
enforcement that might limit adoption of our software. We view legal action
as a last resort, to be initiated only when other community efforts have
failed to resolve the problem.
Finally, once a non-compliance issue is resolved, we hope the user will feel
welcome to join us in our efforts on this project. Working together, we will
be stronger.
Except where noted below, we speak only for ourselves, and not for any company
we might work for today, have in the past, or will in the future.
- Bjorn Andersson (Linaro)
- Andrea Arcangeli (Red Hat)
- Neil Armstrong
- Jens Axboe
- Pablo Neira Ayuso
- Khalid Aziz
- Ralf Baechle
- Felipe Balbi
- Arnd Bergmann
- Ard Biesheuvel
- Paolo Bonzini (Red Hat)
- Christian Borntraeger
- Mark Brown (Linaro)
- Paul Burton
- Javier Martinez Canillas
- Rob Clark
- Jonathan Corbet
- Vivien Didelot (Savoir-faire Linux)
- Hans de Goede (Red Hat)
- Mel Gorman (SUSE)
- Sven Eckelmann
- Alex Elder (Linaro)
- Fabio Estevam
- Larry Finger
- Bhumika Goyal
- Andy Gross
- Juergen Gross
- Shawn Guo
- Ulf Hansson
- Tejun Heo
- Rob Herring
- Masami Hiramatsu
- Michal Hocko
- Simon Horman
- Johan Hovold (Hovold Consulting AB)
- Christophe JAILLET
- Olof Johansson
- Lee Jones (Linaro)
- Heiner Kallweit
- Srinivas Kandagatla
- Jan Kara
- Shuah Khan (Samsung)
- David Kershner
- Jaegeuk Kim
- Namhyung Kim
- Colin Ian King
- Jeff Kirsher
- Greg Kroah-Hartman (Linux Foundation)
- Christian König
- Vinod Koul
- Krzysztof Kozlowski
- Viresh Kumar
- Aneesh Kumar K.V
- Julia Lawall
- Doug Ledford (Red Hat)
- Chuck Lever (Oracle)
- Daniel Lezcano
- Shaohua Li
- Xin Long (Red Hat)
- Tony Luck
- Mike Marshall
- Chris Mason
- Paul E. McKenney
- David S. Miller
- Ingo Molnar
- Kuninori Morimoto
- Borislav Petkov
- Jiri Pirko
- Josh Poimboeuf
- Sebastian Reichel (Collabora)
- Guenter Roeck
- Joerg Roedel
- Leon Romanovsky
- Steven Rostedt (VMware)
- Ivan Safonov
- Ivan Safonov
- Anna Schumaker
- Jes Sorensen
- K.Y. Srinivasan
- Heiko Stuebner
- Jiri Kosina (SUSE)
- Dmitry Torokhov
- Linus Torvalds
- Thierry Reding
- Rik van Riel
- Geert Uytterhoeven (Glider bvba)
- Daniel Vetter
- Linus Walleij
- Richard Weinberger
- Dan Williams
- Rafael J. Wysocki
- Arvind Yadav
- Masahiro Yamada
- Wei Yongjun
- Lv Zheng

View File

@ -9213,7 +9213,6 @@ F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Bin Liu <b-liu@ti.com>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/musb/
@ -10560,6 +10559,8 @@ M: Peter Zijlstra <peterz@infradead.org>
M: Ingo Molnar <mingo@redhat.com>
M: Arnaldo Carvalho de Melo <acme@kernel.org>
R: Alexander Shishkin <alexander.shishkin@linux.intel.com>
R: Jiri Olsa <jolsa@redhat.com>
R: Namhyung Kim <namhyung@kernel.org>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Supported

View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 14
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc6
NAME = Fearless Coyote
# *DOCUMENTATION*

View File

@ -131,7 +131,7 @@ endif
KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
CHECKFLAGS += -D__arm__
CHECKFLAGS += -D__arm__ -m32
#Default value
head-y := arch/arm/kernel/head$(MMUEXT).o

View File

@ -23,7 +23,11 @@ ENTRY(putc)
strb r0, [r1]
mov r0, #0x03 @ SYS_WRITEC
ARM( svc #0x123456 )
#ifdef CONFIG_CPU_V7M
THUMB( bkpt #0xab )
#else
THUMB( svc #0xab )
#endif
mov pc, lr
.align 2
1: .word _GLOBAL_OFFSET_TABLE_ - .

View File

@ -178,7 +178,7 @@
};
i2c0: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
@ -189,7 +189,7 @@
};
i2c1: i2c@11100 {
compatible = "marvell,mv64xxx-i2c";
compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;

View File

@ -67,8 +67,8 @@
pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
ethernet-phy@1 {
reg = <0x1>;
ethernet-phy@0 {
reg = <0x0>;
interrupt-parent = <&pioA>;
interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";

View File

@ -309,7 +309,7 @@
vddana-supply = <&vdd_3v3_lp_reg>;
vref-supply = <&vdd_3v3_lp_reg>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc_default>;
pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
status = "okay";
};
@ -340,6 +340,20 @@
bias-disable;
};
/*
* The ADTRG pin can work on any edge type.
* In here it's being pulled up, so need to
* connect it to ground to get an edge e.g.
* Trigger can be configured on falling, rise
* or any edge, and the pull-up can be changed
* to pull-down or left floating according to
* needs.
*/
pinctrl_adtrg_default: adtrg_default {
pinmux = <PIN_PD31__ADTRG>;
bias-pull-up;
};
pinctrl_charger_chglev: charger_chglev {
pinmux = <PIN_PA12__GPIO>;
bias-disable;

View File

@ -18,12 +18,9 @@
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
model = "Raspberry Pi Zero W";
/* Needed by firmware to properly init UARTs */
aliases {
uart0 = "/soc/serial@7e201000";
uart1 = "/soc/serial@7e215040";
serial0 = "/soc/serial@7e201000";
serial1 = "/soc/serial@7e215040";
chosen {
/* 8250 auxiliary UART instead of pl011 */
stdout-path = "serial1:115200n8";
};
leds {

View File

@ -8,6 +8,11 @@
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
model = "Raspberry Pi 3 Model B";
chosen {
/* 8250 auxiliary UART instead of pl011 */
stdout-path = "serial1:115200n8";
};
memory {
reg = <0 0x40000000>;
};

View File

@ -20,8 +20,13 @@
#address-cells = <1>;
#size-cells = <1>;
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
chosen {
bootargs = "earlyprintk console=ttyAMA0";
stdout-path = "serial0:115200n8";
};
thermal-zones {

View File

@ -145,11 +145,12 @@
};
watchdog@41000000 {
compatible = "cortina,gemini-watchdog";
compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
reg = <0x41000000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_WDOG>;
clocks = <&syscon GEMINI_CLK_APB>;
clock-names = "PCLK";
};
uart0: serial@42000000 {

View File

@ -144,10 +144,10 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
<&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
<&clks IMX7D_PCIE_PHY_ROOT_CLK>;

View File

@ -87,9 +87,10 @@
};
watchdog: watchdog@98500000 {
compatible = "moxa,moxart-watchdog";
compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
reg = <0x98500000 0x10>;
clocks = <&clk_apb>;
clock-names = "PCLK";
};
sdhci: sdhci@98e00000 {

View File

@ -1430,6 +1430,7 @@
atmel,min-sample-rate-hz = <200000>;
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};

View File

@ -311,8 +311,8 @@
#size-cells = <0>;
reg = <0>;
tcon1_in_drc1: endpoint@0 {
reg = <0>;
tcon1_in_drc1: endpoint@1 {
reg = <1>;
remote-endpoint = <&drc1_out_tcon1>;
};
};
@ -1012,8 +1012,8 @@
#size-cells = <0>;
reg = <1>;
be1_out_drc1: endpoint@0 {
reg = <0>;
be1_out_drc1: endpoint@1 {
reg = <1>;
remote-endpoint = <&drc1_in_be1>;
};
};
@ -1042,8 +1042,8 @@
#size-cells = <0>;
reg = <0>;
drc1_in_be1: endpoint@0 {
reg = <0>;
drc1_in_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_out_drc1>;
};
};
@ -1053,8 +1053,8 @@
#size-cells = <0>;
reg = <1>;
drc1_out_tcon1: endpoint@0 {
reg = <0>;
drc1_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_drc1>;
};
};

View File

@ -115,7 +115,11 @@ ENTRY(printascii)
mov r1, r0
mov r0, #0x04 @ SYS_WRITE0
ARM( svc #0x123456 )
#ifdef CONFIG_CPU_V7M
THUMB( bkpt #0xab )
#else
THUMB( svc #0xab )
#endif
ret lr
ENDPROC(printascii)
@ -124,7 +128,11 @@ ENTRY(printch)
strb r0, [r1]
mov r0, #0x03 @ SYS_WRITEC
ARM( svc #0x123456 )
#ifdef CONFIG_CPU_V7M
THUMB( bkpt #0xab )
#else
THUMB( svc #0xab )
#endif
ret lr
ENDPROC(printch)

View File

@ -32,6 +32,7 @@
#include <asm/mach/arch.h>
#include "db8500-regs.h"
#include "pm_domains.h"
static int __init ux500_l2x0_unlock(void)
{
@ -157,6 +158,9 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
static void __init u8500_init_machine(void)
{
/* Initialize ux500 power domains */
ux500_pm_domains_init();
/* automatically probe child nodes of dbx5x0 devices */
if (of_machine_is_compatible("st-ericsson,u8540"))
of_platform_populate(NULL, u8500_local_bus_nodes,

View File

@ -19,7 +19,6 @@
#include <linux/of_address.h>
#include "db8500-regs.h"
#include "pm_domains.h"
/* ARM WFI Standby signal register */
#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130)
@ -203,7 +202,4 @@ void __init ux500_pm_init(u32 phy_base, u32 size)
/* Set up ux500 suspend callbacks. */
suspend_set_ops(UX500_SUSPEND_OPS);
/* Initialize ux500 power domains */
ux500_pm_domains_init();
}

View File

@ -344,6 +344,11 @@ void __init arm_mm_memblock_reserve(void)
* reserved here.
*/
#endif
/*
* In any case, always ensure address 0 is never used as many things
* get very confused if 0 is returned as a legitimate address.
*/
memblock_reserve(0, 1);
}
void __init adjust_lowmem_bounds(void)

View File

@ -61,13 +61,6 @@
chosen {
stdout-path = "serial0:115200n8";
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&ehci0 {
@ -91,7 +84,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
cd-inverted;
disable-wp;

View File

@ -336,7 +336,7 @@
/* non-prefetchable memory */
0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clocks = <&cpm_clk 1 13>;
@ -362,7 +362,7 @@
/* non-prefetchable memory */
0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
@ -389,7 +389,7 @@
/* non-prefetchable memory */
0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;

View File

@ -335,7 +335,7 @@
/* non-prefetchable memory */
0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clocks = <&cps_clk 1 13>;
@ -361,7 +361,7 @@
/* non-prefetchable memory */
0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
@ -388,7 +388,7 @@
/* non-prefetchable memory */
0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;

View File

@ -62,6 +62,7 @@
brightness-levels = <256 128 64 16 8 4 0>;
default-brightness-level = <6>;
power-supply = <&reg_12v>;
enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
};
@ -83,6 +84,15 @@
regulator-always-on;
};
reg_12v: regulator2 {
compatible = "regulator-fixed";
regulator-name = "fixed-12V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-boot-on;
regulator-always-on;
};
rsnd_ak4613: sound {
compatible = "simple-audio-card";

View File

@ -582,7 +582,7 @@
vop_mmu: iommu@ff373f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff373f00 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vop_mmu";
#iommu-cells = <0>;
status = "disabled";

View File

@ -740,7 +740,7 @@
iep_mmu: iommu@ff900800 {
compatible = "rockchip,iommu";
reg = <0x0 0xff900800 0x0 0x100>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "iep_mmu";
#iommu-cells = <0>;
status = "disabled";

View File

@ -371,10 +371,10 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
regulator-suspend-microvolt = <3000000>;
};
};

View File

@ -325,12 +325,12 @@
vcc_sd: LDO_REG4 {
regulator-name = "vcc_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
regulator-suspend-microvolt = <3000000>;
};
};

View File

@ -315,10 +315,10 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
regulator-suspend-microvolt = <3000000>;
};
};

View File

@ -35,12 +35,12 @@ EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(__xchg8);
EXPORT_SYMBOL(__xchg32);
EXPORT_SYMBOL(__cmpxchg_u32);
EXPORT_SYMBOL(__cmpxchg_u64);
#ifdef CONFIG_SMP
EXPORT_SYMBOL(__atomic_hash);
#endif
#ifdef CONFIG_64BIT
EXPORT_SYMBOL(__xchg64);
EXPORT_SYMBOL(__cmpxchg_u64);
#endif
#include <linux/uaccess.h>

View File

@ -742,7 +742,7 @@ lws_compare_and_swap_2:
10: ldd 0(%r25), %r25
11: ldd 0(%r24), %r24
#else
/* Load new value into r22/r23 - high/low */
/* Load old value into r22/r23 - high/low */
10: ldw 0(%r25), %r22
11: ldw 4(%r25), %r23
/* Load new value into fr4 for atomic store later */
@ -834,11 +834,11 @@ cas2_action:
copy %r0, %r28
#else
/* Compare first word */
19: ldw,ma 0(%r26), %r29
19: ldw 0(%r26), %r29
sub,= %r29, %r22, %r0
b,n cas2_end
/* Compare second word */
20: ldw,ma 4(%r26), %r29
20: ldw 4(%r26), %r29
sub,= %r29, %r23, %r0
b,n cas2_end
/* Perform the store */

View File

@ -253,7 +253,10 @@ static int __init init_cr16_clocksource(void)
cpu0_loc = per_cpu(cpu_data, 0).cpu_loc;
for_each_online_cpu(cpu) {
if (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc)
if (cpu == 0)
continue;
if ((cpu0_loc != 0) &&
(cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc))
continue;
clocksource_cr16.name = "cr16_unstable";

View File

@ -27,6 +27,7 @@ CONFIG_NET=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_XPRAM is not set
# CONFIG_DCSSBLK is not set
# CONFIG_DASD is not set
@ -59,6 +60,7 @@ CONFIG_CONFIGFS_FS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_PANIC_ON_OOPS=y
# CONFIG_SCHED_DEBUG is not set

View File

@ -293,7 +293,10 @@ static void pcpu_attach_task(struct pcpu *pcpu, struct task_struct *tsk)
lc->lpp = LPP_MAGIC;
lc->current_pid = tsk->pid;
lc->user_timer = tsk->thread.user_timer;
lc->guest_timer = tsk->thread.guest_timer;
lc->system_timer = tsk->thread.system_timer;
lc->hardirq_timer = tsk->thread.hardirq_timer;
lc->softirq_timer = tsk->thread.softirq_timer;
lc->steal_timer = 0;
}

View File

@ -110,6 +110,10 @@ build_mmio_write(__writeq, "q", unsigned long, "r", )
#endif
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
/**
* virt_to_phys - map virtual addresses to physical
* @address: address to remap

View File

@ -82,12 +82,21 @@ static inline u64 inc_mm_tlb_gen(struct mm_struct *mm)
#define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
#endif
/*
* If tlb_use_lazy_mode is true, then we try to avoid switching CR3 to point
* to init_mm when we switch to a kernel thread (e.g. the idle thread). If
* it's false, then we immediately switch CR3 when entering a kernel thread.
*/
DECLARE_STATIC_KEY_TRUE(tlb_use_lazy_mode);
static inline bool tlb_defer_switch_to_init_mm(void)
{
/*
* If we have PCID, then switching to init_mm is reasonably
* fast. If we don't have PCID, then switching to init_mm is
* quite slow, so we try to defer it in the hopes that we can
* avoid it entirely. The latter approach runs the risk of
* receiving otherwise unnecessary IPIs.
*
* This choice is just a heuristic. The tlb code can handle this
* function returning true or false regardless of whether we have
* PCID.
*/
return !static_cpu_has(X86_FEATURE_PCID);
}
/*
* 6 because 6 should be plenty and struct tlb_state will fit in

View File

@ -831,7 +831,6 @@ static int __cache_amd_cpumap_setup(unsigned int cpu, int index,
} else if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
unsigned int apicid, nshared, first, last;
this_leaf = this_cpu_ci->info_list + index;
nshared = base->eax.split.num_threads_sharing + 1;
apicid = cpu_data(cpu).apicid;
first = apicid - (apicid % nshared);

View File

@ -34,6 +34,7 @@
#include <linux/mm.h>
#include <asm/microcode_intel.h>
#include <asm/intel-family.h>
#include <asm/processor.h>
#include <asm/tlbflush.h>
#include <asm/setup.h>
@ -918,6 +919,18 @@ static int get_ucode_fw(void *to, const void *from, size_t n)
return 0;
}
static bool is_blacklisted(unsigned int cpu)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
if (c->x86 == 6 && c->x86_model == INTEL_FAM6_BROADWELL_X) {
pr_err_once("late loading on model 79 is disabled.\n");
return true;
}
return false;
}
static enum ucode_state request_microcode_fw(int cpu, struct device *device,
bool refresh_fw)
{
@ -926,6 +939,9 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device,
const struct firmware *firmware;
enum ucode_state ret;
if (is_blacklisted(cpu))
return UCODE_NFOUND;
sprintf(name, "intel-ucode/%02x-%02x-%02x",
c->x86, c->x86_model, c->x86_mask);
@ -950,6 +966,9 @@ static int get_ucode_user(void *to, const void *from, size_t n)
static enum ucode_state
request_microcode_user(int cpu, const void __user *buf, size_t size)
{
if (is_blacklisted(cpu))
return UCODE_NFOUND;
return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user);
}

View File

@ -30,10 +30,11 @@ static void __init i386_default_early_setup(void)
asmlinkage __visible void __init i386_start_kernel(void)
{
cr4_init_shadow();
/* Make sure IDT is set up before any exception happens */
idt_setup_early_handler();
cr4_init_shadow();
sanitize_boot_params(&boot_params);
x86_early_init_platform_quirks();

View File

@ -174,3 +174,15 @@ const char *arch_vma_name(struct vm_area_struct *vma)
return "[mpx]";
return NULL;
}
int valid_phys_addr_range(phys_addr_t addr, size_t count)
{
return addr + count <= __pa(high_memory);
}
int valid_mmap_phys_addr_range(unsigned long pfn, size_t count)
{
phys_addr_t addr = (phys_addr_t)pfn << PAGE_SHIFT;
return valid_phys_addr_range(addr, count);
}

View File

@ -30,7 +30,6 @@
atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1);
DEFINE_STATIC_KEY_TRUE(tlb_use_lazy_mode);
static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen,
u16 *new_asid, bool *need_flush)
@ -147,8 +146,8 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
this_cpu_write(cpu_tlbstate.is_lazy, false);
if (real_prev == next) {
VM_BUG_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=
next->context.ctx_id);
VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=
next->context.ctx_id);
/*
* We don't currently support having a real mm loaded without
@ -213,6 +212,9 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
}
/*
* Please ignore the name of this function. It should be called
* switch_to_kernel_thread().
*
* enter_lazy_tlb() is a hint from the scheduler that we are entering a
* kernel thread or other context without an mm. Acceptable implementations
* include doing nothing whatsoever, switching to init_mm, or various clever
@ -227,7 +229,7 @@ void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
if (this_cpu_read(cpu_tlbstate.loaded_mm) == &init_mm)
return;
if (static_branch_unlikely(&tlb_use_lazy_mode)) {
if (tlb_defer_switch_to_init_mm()) {
/*
* There's a significant optimization that may be possible
* here. We have accurate enough TLB flush tracking that we
@ -626,57 +628,3 @@ static int __init create_tlb_single_page_flush_ceiling(void)
return 0;
}
late_initcall(create_tlb_single_page_flush_ceiling);
static ssize_t tlblazy_read_file(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
char buf[2];
buf[0] = static_branch_likely(&tlb_use_lazy_mode) ? '1' : '0';
buf[1] = '\n';
return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
}
static ssize_t tlblazy_write_file(struct file *file,
const char __user *user_buf, size_t count, loff_t *ppos)
{
bool val;
if (kstrtobool_from_user(user_buf, count, &val))
return -EINVAL;
if (val)
static_branch_enable(&tlb_use_lazy_mode);
else
static_branch_disable(&tlb_use_lazy_mode);
return count;
}
static const struct file_operations fops_tlblazy = {
.read = tlblazy_read_file,
.write = tlblazy_write_file,
.llseek = default_llseek,
};
static int __init init_tlb_use_lazy_mode(void)
{
if (boot_cpu_has(X86_FEATURE_PCID)) {
/*
* Heuristic: with PCID on, switching to and from
* init_mm is reasonably fast, but remote flush IPIs
* as expensive as ever, so turn off lazy TLB mode.
*
* We can't do this in setup_pcid() because static keys
* haven't been initialized yet, and it would blow up
* badly.
*/
static_branch_disable(&tlb_use_lazy_mode);
}
debugfs_create_file("tlb_use_lazy_mode", S_IRUSR | S_IWUSR,
arch_debugfs_dir, NULL, &fops_tlblazy);
return 0;
}
late_initcall(init_tlb_use_lazy_mode);

View File

@ -57,6 +57,8 @@ struct key *find_asymmetric_key(struct key *keyring,
char *req, *p;
int len;
BUG_ON(!id_0 && !id_1);
if (id_0) {
lookup = id_0->data;
len = id_0->len;
@ -105,7 +107,7 @@ struct key *find_asymmetric_key(struct key *keyring,
if (id_0 && id_1) {
const struct asymmetric_key_ids *kids = asymmetric_key_ids(key);
if (!kids->id[0]) {
if (!kids->id[1]) {
pr_debug("First ID matches, but second is missing\n");
goto reject;
}

View File

@ -88,6 +88,9 @@ static int pkcs7_check_authattrs(struct pkcs7_message *msg)
bool want = false;
sinfo = msg->signed_infos;
if (!sinfo)
goto inconsistent;
if (sinfo->authattrs) {
want = true;
msg->have_authattrs = true;

View File

@ -3662,12 +3662,6 @@ static void binder_stat_br(struct binder_proc *proc,
}
}
static int binder_has_thread_work(struct binder_thread *thread)
{
return !binder_worklist_empty(thread->proc, &thread->todo) ||
thread->looper_need_return;
}
static int binder_put_node_cmd(struct binder_proc *proc,
struct binder_thread *thread,
void __user **ptrp,
@ -4297,12 +4291,9 @@ static unsigned int binder_poll(struct file *filp,
binder_inner_proc_unlock(thread->proc);
if (binder_has_work(thread, wait_for_proc_work))
return POLLIN;
poll_wait(filp, &thread->wait, wait);
if (binder_has_thread_work(thread))
if (binder_has_work(thread, wait_for_proc_work))
return POLLIN;
return 0;

View File

@ -215,17 +215,12 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
}
}
if (!vma && need_mm)
mm = get_task_mm(alloc->tsk);
if (!vma && need_mm && mmget_not_zero(alloc->vma_vm_mm))
mm = alloc->vma_vm_mm;
if (mm) {
down_write(&mm->mmap_sem);
vma = alloc->vma;
if (vma && mm != alloc->vma_vm_mm) {
pr_err("%d: vma mm and task mm mismatch\n",
alloc->pid);
vma = NULL;
}
}
if (!vma && need_mm) {
@ -565,7 +560,7 @@ static void binder_delete_free_buffer(struct binder_alloc *alloc,
binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC,
"%d: merge free, buffer %pK do not share page with %pK or %pK\n",
alloc->pid, buffer->data,
prev->data, next->data);
prev->data, next ? next->data : NULL);
binder_update_page_range(alloc, 0, buffer_start_page(buffer),
buffer_start_page(buffer) + PAGE_SIZE,
NULL);
@ -720,6 +715,7 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc,
barrier();
alloc->vma = vma;
alloc->vma_vm_mm = vma->vm_mm;
mmgrab(alloc->vma_vm_mm);
return 0;
@ -795,6 +791,8 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc)
vfree(alloc->buffer);
}
mutex_unlock(&alloc->mutex);
if (alloc->vma_vm_mm)
mmdrop(alloc->vma_vm_mm);
binder_alloc_debug(BINDER_DEBUG_OPEN_CLOSE,
"%s: %d buffers %d, pages %d\n",
@ -889,7 +887,6 @@ int binder_alloc_get_allocated_count(struct binder_alloc *alloc)
void binder_alloc_vma_close(struct binder_alloc *alloc)
{
WRITE_ONCE(alloc->vma, NULL);
WRITE_ONCE(alloc->vma_vm_mm, NULL);
}
/**
@ -926,9 +923,9 @@ enum lru_status binder_alloc_free_page(struct list_head *item,
page_addr = (uintptr_t)alloc->buffer + index * PAGE_SIZE;
vma = alloc->vma;
if (vma) {
mm = get_task_mm(alloc->tsk);
if (!mm)
goto err_get_task_mm_failed;
if (!mmget_not_zero(alloc->vma_vm_mm))
goto err_mmget;
mm = alloc->vma_vm_mm;
if (!down_write_trylock(&mm->mmap_sem))
goto err_down_write_mmap_sem_failed;
}
@ -963,7 +960,7 @@ enum lru_status binder_alloc_free_page(struct list_head *item,
err_down_write_mmap_sem_failed:
mmput_async(mm);
err_get_task_mm_failed:
err_mmget:
err_page_already_freed:
mutex_unlock(&alloc->mutex);
err_get_alloc_mutex_failed:
@ -1002,7 +999,6 @@ struct shrinker binder_shrinker = {
*/
void binder_alloc_init(struct binder_alloc *alloc)
{
alloc->tsk = current->group_leader;
alloc->pid = current->group_leader->pid;
mutex_init(&alloc->mutex);
INIT_LIST_HEAD(&alloc->buffers);

View File

@ -100,7 +100,6 @@ struct binder_lru_page {
*/
struct binder_alloc {
struct mutex mutex;
struct task_struct *tsk;
struct vm_area_struct *vma;
struct mm_struct *vma_vm_mm;
void *buffer;

View File

@ -243,7 +243,6 @@ static void nbd_size_set(struct nbd_device *nbd, loff_t blocksize,
struct nbd_config *config = nbd->config;
config->blksize = blocksize;
config->bytesize = blocksize * nr_blocks;
nbd_size_update(nbd);
}
static void nbd_complete_rq(struct request *req)
@ -1094,6 +1093,7 @@ static int nbd_start_device(struct nbd_device *nbd)
args->index = i;
queue_work(recv_workqueue, &args->work);
}
nbd_size_update(nbd);
return error;
}

View File

@ -2604,7 +2604,7 @@ static void *skd_alloc_dma(struct skd_device *skdev, struct kmem_cache *s,
return NULL;
*dma_handle = dma_map_single(dev, buf, s->size, dir);
if (dma_mapping_error(dev, *dma_handle)) {
kfree(buf);
kmem_cache_free(s, buf);
buf = NULL;
}
return buf;

View File

@ -720,7 +720,7 @@ mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
if (mbus->hw_io_coherency)
w->mbus_attr |= ATTR_HW_COHERENCY;
w->base = base & DDR_BASE_CS_LOW_MASK;
w->size = (size | ~DDR_SIZE_MASK) + 1;
w->size = (u64)(size | ~DDR_SIZE_MASK) + 1;
}
}
mvebu_mbus_dram_info.num_cs = cs;

View File

@ -117,7 +117,8 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
/* Turn off the clock (and clear the event) */
disable_timer(cs5535_event_clock);
if (clockevent_state_shutdown(&cs5535_clockevent))
if (clockevent_state_detached(&cs5535_clockevent) ||
clockevent_state_shutdown(&cs5535_clockevent))
return IRQ_HANDLED;
/* Clear the counter */

View File

@ -344,7 +344,7 @@ msgdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
spin_lock_irqsave(&mdev->lock, irqflags);
if (desc_cnt > mdev->desc_free_cnt) {
spin_unlock_bh(&mdev->lock);
spin_unlock_irqrestore(&mdev->lock, irqflags);
dev_dbg(mdev->dev, "mdev %p descs are not available\n", mdev);
return NULL;
}
@ -407,7 +407,7 @@ msgdma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
spin_lock_irqsave(&mdev->lock, irqflags);
if (desc_cnt > mdev->desc_free_cnt) {
spin_unlock_bh(&mdev->lock);
spin_unlock_irqrestore(&mdev->lock, irqflags);
dev_dbg(mdev->dev, "mdev %p descs are not available\n", mdev);
return NULL;
}

View File

@ -205,32 +205,17 @@ void amd_sched_entity_fini(struct amd_gpu_scheduler *sched,
struct amd_sched_entity *entity)
{
struct amd_sched_rq *rq = entity->rq;
int r;
if (!amd_sched_entity_is_initialized(sched, entity))
return;
/**
* The client will not queue more IBs during this fini, consume existing
* queued IBs or discard them on SIGKILL
* queued IBs
*/
if ((current->flags & PF_SIGNALED) && current->exit_code == SIGKILL)
r = -ERESTARTSYS;
else
r = wait_event_killable(sched->job_scheduled,
amd_sched_entity_is_idle(entity));
wait_event(sched->job_scheduled, amd_sched_entity_is_idle(entity));
amd_sched_rq_remove_entity(rq, entity);
if (r) {
struct amd_sched_job *job;
/* Park the kernel for a moment to make sure it isn't processing
* our enity.
*/
kthread_park(sched->thread);
kthread_unpark(sched->thread);
while (kfifo_out(&entity->job_queue, &job, sizeof(job)))
sched->ops->free_job(job);
}
kfifo_free(&entity->job_queue);
}

View File

@ -168,11 +168,13 @@ static struct drm_driver exynos_drm_driver = {
static int exynos_drm_suspend(struct device *dev)
{
struct drm_device *drm_dev = dev_get_drvdata(dev);
struct exynos_drm_private *private = drm_dev->dev_private;
struct exynos_drm_private *private;
if (pm_runtime_suspended(dev) || !drm_dev)
return 0;
private = drm_dev->dev_private;
drm_kms_helper_poll_disable(drm_dev);
exynos_drm_fbdev_suspend(drm_dev);
private->suspend_state = drm_atomic_helper_suspend(drm_dev);
@ -188,11 +190,12 @@ static int exynos_drm_suspend(struct device *dev)
static int exynos_drm_resume(struct device *dev)
{
struct drm_device *drm_dev = dev_get_drvdata(dev);
struct exynos_drm_private *private = drm_dev->dev_private;
struct exynos_drm_private *private;
if (pm_runtime_suspended(dev) || !drm_dev)
return 0;
private = drm_dev->dev_private;
drm_atomic_helper_resume(drm_dev, private->suspend_state);
exynos_drm_fbdev_resume(drm_dev);
drm_kms_helper_poll_enable(drm_dev);
@ -427,6 +430,7 @@ static void exynos_drm_unbind(struct device *dev)
kfree(drm->dev_private);
drm->dev_private = NULL;
dev_set_drvdata(dev, NULL);
drm_dev_unref(drm);
}

View File

@ -308,20 +308,8 @@ static int tbs_sched_init_vgpu(struct intel_vgpu *vgpu)
static void tbs_sched_clean_vgpu(struct intel_vgpu *vgpu)
{
struct intel_gvt_workload_scheduler *scheduler = &vgpu->gvt->scheduler;
int ring_id;
kfree(vgpu->sched_data);
vgpu->sched_data = NULL;
spin_lock_bh(&scheduler->mmio_context_lock);
for (ring_id = 0; ring_id < I915_NUM_ENGINES; ring_id++) {
if (scheduler->engine_owner[ring_id] == vgpu) {
intel_gvt_switch_mmio(vgpu, NULL, ring_id);
scheduler->engine_owner[ring_id] = NULL;
}
}
spin_unlock_bh(&scheduler->mmio_context_lock);
}
static void tbs_sched_start_schedule(struct intel_vgpu *vgpu)
@ -388,6 +376,7 @@ void intel_vgpu_stop_schedule(struct intel_vgpu *vgpu)
{
struct intel_gvt_workload_scheduler *scheduler =
&vgpu->gvt->scheduler;
int ring_id;
gvt_dbg_core("vgpu%d: stop schedule\n", vgpu->id);
@ -401,4 +390,13 @@ void intel_vgpu_stop_schedule(struct intel_vgpu *vgpu)
scheduler->need_reschedule = true;
scheduler->current_vgpu = NULL;
}
spin_lock_bh(&scheduler->mmio_context_lock);
for (ring_id = 0; ring_id < I915_NUM_ENGINES; ring_id++) {
if (scheduler->engine_owner[ring_id] == vgpu) {
intel_gvt_switch_mmio(vgpu, NULL, ring_id);
scheduler->engine_owner[ring_id] = NULL;
}
}
spin_unlock_bh(&scheduler->mmio_context_lock);
}

View File

@ -2657,6 +2657,9 @@ i915_gem_object_pwrite_gtt(struct drm_i915_gem_object *obj,
if (READ_ONCE(obj->mm.pages))
return -ENODEV;
if (obj->mm.madv != I915_MADV_WILLNEED)
return -EFAULT;
/* Before the pages are instantiated the object is treated as being
* in the CPU domain. The pages will be clflushed as required before
* use, and we can freely write into the pages directly. If userspace

View File

@ -33,21 +33,20 @@
#include "intel_drv.h"
#include "i915_trace.h"
static bool ggtt_is_idle(struct drm_i915_private *dev_priv)
static bool ggtt_is_idle(struct drm_i915_private *i915)
{
struct i915_ggtt *ggtt = &dev_priv->ggtt;
struct intel_engine_cs *engine;
enum intel_engine_id id;
struct intel_engine_cs *engine;
enum intel_engine_id id;
for_each_engine(engine, dev_priv, id) {
struct intel_timeline *tl;
if (i915->gt.active_requests)
return false;
tl = &ggtt->base.timeline.engine[engine->id];
if (i915_gem_active_isset(&tl->last_request))
return false;
}
for_each_engine(engine, i915, id) {
if (engine->last_retired_context != i915->kernel_context)
return false;
}
return true;
return true;
}
static int ggtt_flush(struct drm_i915_private *i915)
@ -157,7 +156,8 @@ i915_gem_evict_something(struct i915_address_space *vm,
min_size, alignment, cache_level,
start, end, mode);
/* Retire before we search the active list. Although we have
/*
* Retire before we search the active list. Although we have
* reasonable accuracy in our retirement lists, we may have
* a stray pin (preventing eviction) that can only be resolved by
* retiring.
@ -182,7 +182,8 @@ search_again:
BUG_ON(ret);
}
/* Can we unpin some objects such as idle hw contents,
/*
* Can we unpin some objects such as idle hw contents,
* or pending flips? But since only the GGTT has global entries
* such as scanouts, rinbuffers and contexts, we can skip the
* purge when inspecting per-process local address spaces.
@ -190,19 +191,33 @@ search_again:
if (!i915_is_ggtt(vm) || flags & PIN_NONBLOCK)
return -ENOSPC;
if (ggtt_is_idle(dev_priv)) {
/* If we still have pending pageflip completions, drop
* back to userspace to give our workqueues time to
* acquire our locks and unpin the old scanouts.
*/
return intel_has_pending_fb_unpin(dev_priv) ? -EAGAIN : -ENOSPC;
/*
* Not everything in the GGTT is tracked via VMA using
* i915_vma_move_to_active(), otherwise we could evict as required
* with minimal stalling. Instead we are forced to idle the GPU and
* explicitly retire outstanding requests which will then remove
* the pinning for active objects such as contexts and ring,
* enabling us to evict them on the next iteration.
*
* To ensure that all user contexts are evictable, we perform
* a switch to the perma-pinned kernel context. This all also gives
* us a termination condition, when the last retired context is
* the kernel's there is no more we can evict.
*/
if (!ggtt_is_idle(dev_priv)) {
ret = ggtt_flush(dev_priv);
if (ret)
return ret;
goto search_again;
}
ret = ggtt_flush(dev_priv);
if (ret)
return ret;
goto search_again;
/*
* If we still have pending pageflip completions, drop
* back to userspace to give our workqueues time to
* acquire our locks and unpin the old scanouts.
*/
return intel_has_pending_fb_unpin(dev_priv) ? -EAGAIN : -ENOSPC;
found:
/* drm_mm doesn't allow any other other operations while

View File

@ -6998,6 +6998,7 @@ enum {
*/
#define L3_GENERAL_PRIO_CREDITS(x) (((x) >> 1) << 19)
#define L3_HIGH_PRIO_CREDITS(x) (((x) >> 1) << 14)
#define L3_PRIO_CREDITS_MASK ((0x1f << 19) | (0x1f << 14))
#define GEN7_L3CNTLREG1 _MMIO(0xB01C)
#define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C47FF8C

View File

@ -664,8 +664,8 @@ intel_ddi_get_buf_trans_fdi(struct drm_i915_private *dev_priv,
int *n_entries)
{
if (IS_BROADWELL(dev_priv)) {
*n_entries = ARRAY_SIZE(hsw_ddi_translations_fdi);
return hsw_ddi_translations_fdi;
*n_entries = ARRAY_SIZE(bdw_ddi_translations_fdi);
return bdw_ddi_translations_fdi;
} else if (IS_HASWELL(dev_priv)) {
*n_entries = ARRAY_SIZE(hsw_ddi_translations_fdi);
return hsw_ddi_translations_fdi;
@ -2102,8 +2102,7 @@ static void intel_ddi_clk_select(struct intel_encoder *encoder,
* register writes.
*/
val = I915_READ(DPCLKA_CFGCR0);
val &= ~(DPCLKA_CFGCR0_DDI_CLK_OFF(port) |
DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port));
val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF(port);
I915_WRITE(DPCLKA_CFGCR0, val);
} else if (IS_GEN9_BC(dev_priv)) {
/* DDI -> PLL mapping */

View File

@ -1996,7 +1996,7 @@ static void cnl_ddi_pll_enable(struct drm_i915_private *dev_priv,
/* 3. Configure DPLL_CFGCR0 */
/* Avoid touch CFGCR1 if HDMI mode is not enabled */
if (pll->state.hw_state.cfgcr0 & DPLL_CTRL1_HDMI_MODE(pll->id)) {
if (pll->state.hw_state.cfgcr0 & DPLL_CFGCR0_HDMI_MODE) {
val = pll->state.hw_state.cfgcr1;
I915_WRITE(CNL_DPLL_CFGCR1(pll->id), val);
/* 4. Reab back to ensure writes completed */

View File

@ -1048,9 +1048,12 @@ static int bxt_init_workarounds(struct intel_engine_cs *engine)
}
/* WaProgramL3SqcReg1DefaultForPerf:bxt */
if (IS_BXT_REVID(dev_priv, BXT_REVID_B0, REVID_FOREVER))
I915_WRITE(GEN8_L3SQCREG1, L3_GENERAL_PRIO_CREDITS(62) |
L3_HIGH_PRIO_CREDITS(2));
if (IS_BXT_REVID(dev_priv, BXT_REVID_B0, REVID_FOREVER)) {
u32 val = I915_READ(GEN8_L3SQCREG1);
val &= ~L3_PRIO_CREDITS_MASK;
val |= L3_GENERAL_PRIO_CREDITS(62) | L3_HIGH_PRIO_CREDITS(2);
I915_WRITE(GEN8_L3SQCREG1, val);
}
/* WaToEnableHwFixForPushConstHWBug:bxt */
if (IS_BXT_REVID(dev_priv, BXT_REVID_C0, REVID_FOREVER))

View File

@ -8245,14 +8245,17 @@ static void gen8_set_l3sqc_credits(struct drm_i915_private *dev_priv,
int high_prio_credits)
{
u32 misccpctl;
u32 val;
/* WaTempDisableDOPClkGating:bdw */
misccpctl = I915_READ(GEN7_MISCCPCTL);
I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
I915_WRITE(GEN8_L3SQCREG1,
L3_GENERAL_PRIO_CREDITS(general_prio_credits) |
L3_HIGH_PRIO_CREDITS(high_prio_credits));
val = I915_READ(GEN8_L3SQCREG1);
val &= ~L3_PRIO_CREDITS_MASK;
val |= L3_GENERAL_PRIO_CREDITS(general_prio_credits);
val |= L3_HIGH_PRIO_CREDITS(high_prio_credits);
I915_WRITE(GEN8_L3SQCREG1, val);
/*
* Wait at least 100 clocks before re-enabling clock gating.

View File

@ -223,7 +223,7 @@ void
nouveau_fbcon_accel_save_disable(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
if (drm->fbcon) {
if (drm->fbcon && drm->fbcon->helper.fbdev) {
drm->fbcon->saved_flags = drm->fbcon->helper.fbdev->flags;
drm->fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
}
@ -233,7 +233,7 @@ void
nouveau_fbcon_accel_restore(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
if (drm->fbcon) {
if (drm->fbcon && drm->fbcon->helper.fbdev) {
drm->fbcon->helper.fbdev->flags = drm->fbcon->saved_flags;
}
}
@ -245,7 +245,8 @@ nouveau_fbcon_accel_fini(struct drm_device *dev)
struct nouveau_fbdev *fbcon = drm->fbcon;
if (fbcon && drm->channel) {
console_lock();
fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
if (fbcon->helper.fbdev)
fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
console_unlock();
nouveau_channel_idle(drm->channel);
nvif_object_fini(&fbcon->twod);

View File

@ -3265,11 +3265,14 @@ nv50_mstm = {
void
nv50_mstm_service(struct nv50_mstm *mstm)
{
struct drm_dp_aux *aux = mstm->mgr.aux;
struct drm_dp_aux *aux = mstm ? mstm->mgr.aux : NULL;
bool handled = true;
int ret;
u8 esi[8] = {};
if (!aux)
return;
while (handled) {
ret = drm_dp_dpcd_read(aux, DP_SINK_COUNT_ESI, esi, 8);
if (ret != 8) {

View File

@ -39,5 +39,5 @@ int
g84_bsp_new(struct nvkm_device *device, int index, struct nvkm_engine **pengine)
{
return nvkm_xtensa_new_(&g84_bsp, device, index,
true, 0x103000, pengine);
device->chipset != 0x92, 0x103000, pengine);
}

View File

@ -241,6 +241,8 @@ nvkm_vm_unmap_pgt(struct nvkm_vm *vm, int big, u32 fpde, u32 lpde)
mmu->func->map_pgt(vpgd->obj, pde, vpgt->mem);
}
mmu->func->flush(vm);
nvkm_memory_del(&pgt);
}
}

View File

@ -937,7 +937,10 @@ void vmbus_hvsock_device_unregister(struct vmbus_channel *channel)
{
BUG_ON(!is_hvsock_channel(channel));
channel->rescind = true;
/* We always get a rescind msg when a connection is closed. */
while (!READ_ONCE(channel->probe_done) || !READ_ONCE(channel->rescind))
msleep(1);
vmbus_device_unregister(channel->device_obj);
}
EXPORT_SYMBOL_GPL(vmbus_hvsock_device_unregister);

View File

@ -1021,7 +1021,7 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
}
dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
rinfo->sda_gpio, rinfo->scl_gpio);
rinfo->scl_gpio, rinfo->sda_gpio);
rinfo->prepare_recovery = i2c_imx_prepare_recovery;
rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
@ -1100,7 +1100,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
}
/* Request IRQ */
ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED,
pdev->name, i2c_imx);
if (ret) {
dev_err(&pdev->dev, "can't claim irq %d\n", irq);

View File

@ -340,12 +340,15 @@ static int ismt_process_desc(const struct ismt_desc *desc,
data->word = dma_buffer[0] | (dma_buffer[1] << 8);
break;
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_I2C_BLOCK_DATA:
if (desc->rxbytes != dma_buffer[0] + 1)
return -EMSGSIZE;
memcpy(data->block, dma_buffer, desc->rxbytes);
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
memcpy(&data->block[1], dma_buffer, desc->rxbytes);
data->block[0] = desc->rxbytes;
break;
}
return 0;
}

View File

@ -360,6 +360,7 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
unsigned long fclk_rate = 12000000;
unsigned long internal_clk = 0;
struct clk *fclk;
int error;
if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) {
/*
@ -378,6 +379,13 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
* do this bit unconditionally.
*/
fclk = clk_get(omap->dev, "fck");
if (IS_ERR(fclk)) {
error = PTR_ERR(fclk);
dev_err(omap->dev, "could not get fck: %i\n", error);
return error;
}
fclk_rate = clk_get_rate(fclk);
clk_put(fclk);
@ -410,6 +418,12 @@ static int omap_i2c_init(struct omap_i2c_dev *omap)
else
internal_clk = 4000;
fclk = clk_get(omap->dev, "fck");
if (IS_ERR(fclk)) {
error = PTR_ERR(fclk);
dev_err(omap->dev, "could not get fck: %i\n", error);
return error;
}
fclk_rate = clk_get_rate(fclk) / 1000;
clk_put(fclk);

View File

@ -85,6 +85,9 @@
/* SB800 constants */
#define SB800_PIIX4_SMB_IDX 0xcd6
#define KERNCZ_IMC_IDX 0x3e
#define KERNCZ_IMC_DATA 0x3f
/*
* SB800 port is selected by bits 2:1 of the smb_en register (0x2c)
* or the smb_sel register (0x2e), depending on bit 0 of register 0x2f.
@ -94,6 +97,12 @@
#define SB800_PIIX4_PORT_IDX_ALT 0x2e
#define SB800_PIIX4_PORT_IDX_SEL 0x2f
#define SB800_PIIX4_PORT_IDX_MASK 0x06
#define SB800_PIIX4_PORT_IDX_SHIFT 1
/* On kerncz, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */
#define SB800_PIIX4_PORT_IDX_KERNCZ 0x02
#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18
#define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3
/* insmod parameters */
@ -149,6 +158,8 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
*/
static DEFINE_MUTEX(piix4_mutex_sb800);
static u8 piix4_port_sel_sb800;
static u8 piix4_port_mask_sb800;
static u8 piix4_port_shift_sb800;
static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
" port 0", " port 2", " port 3", " port 4"
};
@ -159,6 +170,7 @@ struct i2c_piix4_adapdata {
/* SB800 */
bool sb800_main;
bool notify_imc;
u8 port; /* Port number, shifted */
};
@ -347,7 +359,19 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
/* Find which register is used for port selection */
if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) {
piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
switch (PIIX4_dev->device) {
case PCI_DEVICE_ID_AMD_KERNCZ_SMBUS:
piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ;
piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ;
piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ;
break;
case PCI_DEVICE_ID_AMD_HUDSON2_SMBUS:
default:
piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
break;
}
} else {
mutex_lock(&piix4_mutex_sb800);
outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
@ -355,6 +379,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
piix4_port_sel_sb800 = (port_sel & 0x01) ?
SB800_PIIX4_PORT_IDX_ALT :
SB800_PIIX4_PORT_IDX;
piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
mutex_unlock(&piix4_mutex_sb800);
}
@ -572,6 +598,67 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr,
return 0;
}
static uint8_t piix4_imc_read(uint8_t idx)
{
outb_p(idx, KERNCZ_IMC_IDX);
return inb_p(KERNCZ_IMC_DATA);
}
static void piix4_imc_write(uint8_t idx, uint8_t value)
{
outb_p(idx, KERNCZ_IMC_IDX);
outb_p(value, KERNCZ_IMC_DATA);
}
static int piix4_imc_sleep(void)
{
int timeout = MAX_TIMEOUT;
if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
return -EBUSY;
/* clear response register */
piix4_imc_write(0x82, 0x00);
/* request ownership flag */
piix4_imc_write(0x83, 0xB4);
/* kick off IMC Mailbox command 96 */
piix4_imc_write(0x80, 0x96);
while (timeout--) {
if (piix4_imc_read(0x82) == 0xfa) {
release_region(KERNCZ_IMC_IDX, 2);
return 0;
}
usleep_range(1000, 2000);
}
release_region(KERNCZ_IMC_IDX, 2);
return -ETIMEDOUT;
}
static void piix4_imc_wakeup(void)
{
int timeout = MAX_TIMEOUT;
if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc"))
return;
/* clear response register */
piix4_imc_write(0x82, 0x00);
/* release ownership flag */
piix4_imc_write(0x83, 0xB5);
/* kick off IMC Mailbox command 96 */
piix4_imc_write(0x80, 0x96);
while (timeout--) {
if (piix4_imc_read(0x82) == 0xfa)
break;
usleep_range(1000, 2000);
}
release_region(KERNCZ_IMC_IDX, 2);
}
/*
* Handles access to multiple SMBus ports on the SB800.
* The port is selected by bits 2:1 of the smb_en register (0x2c).
@ -612,12 +699,47 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
return -EBUSY;
}
/*
* Notify the IMC (Integrated Micro Controller) if required.
* Among other responsibilities, the IMC is in charge of monitoring
* the System fans and temperature sensors, and act accordingly.
* All this is done through SMBus and can/will collide
* with our transactions if they are long (BLOCK_DATA).
* Therefore we need to request the ownership flag during those
* transactions.
*/
if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc) {
int ret;
ret = piix4_imc_sleep();
switch (ret) {
case -EBUSY:
dev_warn(&adap->dev,
"IMC base address index region 0x%x already in use.\n",
KERNCZ_IMC_IDX);
break;
case -ETIMEDOUT:
dev_warn(&adap->dev,
"Failed to communicate with the IMC.\n");
break;
default:
break;
}
/* If IMC communication fails do not retry */
if (ret) {
dev_warn(&adap->dev,
"Continuing without IMC notification.\n");
adapdata->notify_imc = false;
}
}
outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
port = adapdata->port;
if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != port)
outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | port,
if ((smba_en_lo & piix4_port_mask_sb800) != port)
outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
SB800_PIIX4_SMB_IDX + 1);
retval = piix4_access(adap, addr, flags, read_write,
@ -628,6 +750,9 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
/* Release the semaphore */
outb_p(smbslvcnt | 0x20, SMBSLVCNT);
if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc)
piix4_imc_wakeup();
mutex_unlock(&piix4_mutex_sb800);
return retval;
@ -679,7 +804,7 @@ static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
static struct i2c_adapter *piix4_aux_adapter;
static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
bool sb800_main, u8 port,
bool sb800_main, u8 port, bool notify_imc,
const char *name, struct i2c_adapter **padap)
{
struct i2c_adapter *adap;
@ -706,7 +831,8 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
adapdata->smba = smba;
adapdata->sb800_main = sb800_main;
adapdata->port = port << 1;
adapdata->port = port << piix4_port_shift_sb800;
adapdata->notify_imc = notify_imc;
/* set up the sysfs linkage to our parent device */
adap->dev.parent = &dev->dev;
@ -728,14 +854,15 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
return 0;
}
static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba)
static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba,
bool notify_imc)
{
struct i2c_piix4_adapdata *adapdata;
int port;
int retval;
for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
retval = piix4_add_adapter(dev, smba, true, port,
retval = piix4_add_adapter(dev, smba, true, port, notify_imc,
piix4_main_port_names_sb800[port],
&piix4_main_adapters[port]);
if (retval < 0)
@ -769,6 +896,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
dev->revision >= 0x40) ||
dev->vendor == PCI_VENDOR_ID_AMD) {
bool notify_imc = false;
is_sb800 = true;
if (!request_region(SB800_PIIX4_SMB_IDX, 2, "smba_idx")) {
@ -778,6 +906,20 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -EBUSY;
}
if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) {
u8 imc;
/*
* Detect if IMC is active or not, this method is
* described on coreboot's AMD IMC notes
*/
pci_bus_read_config_byte(dev->bus, PCI_DEVFN(0x14, 3),
0x40, &imc);
if (imc & 0x80)
notify_imc = true;
}
/* base address location etc changed in SB800 */
retval = piix4_setup_sb800(dev, id, 0);
if (retval < 0) {
@ -789,7 +931,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
* Try to register multiplexed main SMBus adapter,
* give up if we can't
*/
retval = piix4_add_adapters_sb800(dev, retval);
retval = piix4_add_adapters_sb800(dev, retval, notify_imc);
if (retval < 0) {
release_region(SB800_PIIX4_SMB_IDX, 2);
return retval;
@ -800,7 +942,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
return retval;
/* Try to register main SMBus adapter, give up if we can't */
retval = piix4_add_adapter(dev, retval, false, 0, "",
retval = piix4_add_adapter(dev, retval, false, 0, false, "",
&piix4_main_adapters[0]);
if (retval < 0)
return retval;
@ -827,7 +969,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (retval > 0) {
/* Try to add the aux adapter if it exists,
* piix4_add_adapter will clean up if this fails */
piix4_add_adapter(dev, retval, false, 0,
piix4_add_adapter(dev, retval, false, 0, false,
is_sb800 ? piix4_aux_port_name_sb800 : "",
&piix4_aux_adapter);
}

View File

@ -243,6 +243,8 @@ config DA9150_GPADC
config DLN2_ADC
tristate "Diolan DLN-2 ADC driver support"
depends on MFD_DLN2
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Diolan DLN-2 ADC.

View File

@ -225,6 +225,7 @@ struct at91_adc_trigger {
char *name;
unsigned int trgmod_value;
unsigned int edge_type;
bool hw_trig;
};
struct at91_adc_state {
@ -254,16 +255,25 @@ static const struct at91_adc_trigger at91_adc_trigger_list[] = {
.name = "external_rising",
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE,
.edge_type = IRQ_TYPE_EDGE_RISING,
.hw_trig = true,
},
{
.name = "external_falling",
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL,
.edge_type = IRQ_TYPE_EDGE_FALLING,
.hw_trig = true,
},
{
.name = "external_any",
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY,
.edge_type = IRQ_TYPE_EDGE_BOTH,
.hw_trig = true,
},
{
.name = "software",
.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER,
.edge_type = IRQ_TYPE_NONE,
.hw_trig = false,
},
};
@ -597,7 +607,7 @@ static int at91_adc_probe(struct platform_device *pdev)
struct at91_adc_state *st;
struct resource *res;
int ret, i;
u32 edge_type;
u32 edge_type = IRQ_TYPE_NONE;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
if (!indio_dev)
@ -641,14 +651,14 @@ static int at91_adc_probe(struct platform_device *pdev)
ret = of_property_read_u32(pdev->dev.of_node,
"atmel,trigger-edge-type", &edge_type);
if (ret) {
dev_err(&pdev->dev,
"invalid or missing value for atmel,trigger-edge-type\n");
return ret;
dev_dbg(&pdev->dev,
"atmel,trigger-edge-type not specified, only software trigger available\n");
}
st->selected_trig = NULL;
for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++)
/* find the right trigger, or no trigger at all */
for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT + 1; i++)
if (at91_adc_trigger_list[i].edge_type == edge_type) {
st->selected_trig = &at91_adc_trigger_list[i];
break;
@ -717,24 +727,27 @@ static int at91_adc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, indio_dev);
ret = at91_adc_buffer_init(indio_dev);
if (ret < 0) {
dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
goto per_clk_disable_unprepare;
}
if (st->selected_trig->hw_trig) {
ret = at91_adc_buffer_init(indio_dev);
if (ret < 0) {
dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
goto per_clk_disable_unprepare;
}
ret = at91_adc_trigger_init(indio_dev);
if (ret < 0) {
dev_err(&pdev->dev, "couldn't setup the triggers.\n");
goto per_clk_disable_unprepare;
ret = at91_adc_trigger_init(indio_dev);
if (ret < 0) {
dev_err(&pdev->dev, "couldn't setup the triggers.\n");
goto per_clk_disable_unprepare;
}
}
ret = iio_device_register(indio_dev);
if (ret < 0)
goto per_clk_disable_unprepare;
dev_info(&pdev->dev, "setting up trigger as %s\n",
st->selected_trig->name);
if (st->selected_trig->hw_trig)
dev_info(&pdev->dev, "setting up trigger as %s\n",
st->selected_trig->name);
dev_info(&pdev->dev, "version: %x\n",
readl_relaxed(st->base + AT91_SAMA5D2_VERSION));

View File

@ -72,6 +72,7 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
st->event_en = state;
else
return -EINVAL;
break;
default:
return -EINVAL;
}

View File

@ -865,7 +865,6 @@ complete:
static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev,
struct zpa2326_private *private)
{
int ret;
unsigned int val;
long timeout;
@ -887,14 +886,11 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev *indio_dev,
/* Timed out. */
zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)",
timeout);
ret = -ETIME;
} else if (timeout < 0) {
zpa2326_warn(indio_dev,
"wait for one shot interrupt cancelled");
ret = -ERESTARTSYS;
return -ETIME;
}
return ret;
zpa2326_warn(indio_dev, "wait for one shot interrupt cancelled");
return -ERESTARTSYS;
}
static int zpa2326_init_managed_irq(struct device *parent,

View File

@ -39,8 +39,12 @@
#define AS3935_AFE_GAIN_MAX 0x1F
#define AS3935_AFE_PWR_BIT BIT(0)
#define AS3935_NFLWDTH 0x01
#define AS3935_NFLWDTH_MASK 0x7f
#define AS3935_INT 0x03
#define AS3935_INT_MASK 0x0f
#define AS3935_DISTURB_INT BIT(2)
#define AS3935_EVENT_INT BIT(3)
#define AS3935_NOISE_INT BIT(0)
@ -48,6 +52,7 @@
#define AS3935_DATA_MASK 0x3F
#define AS3935_TUNE_CAP 0x08
#define AS3935_DEFAULTS 0x3C
#define AS3935_CALIBRATE 0x3D
#define AS3935_READ_DATA BIT(14)
@ -62,7 +67,9 @@ struct as3935_state {
struct mutex lock;
struct delayed_work work;
unsigned long noise_tripped;
u32 tune_cap;
u32 nflwdth_reg;
u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */
u8 buf[2] ____cacheline_aligned;
};
@ -145,12 +152,29 @@ static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
return len;
}
static ssize_t as3935_noise_level_tripped_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
int ret;
mutex_lock(&st->lock);
ret = sprintf(buf, "%d\n", !time_after(jiffies, st->noise_tripped + HZ));
mutex_unlock(&st->lock);
return ret;
}
static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0);
static IIO_DEVICE_ATTR(noise_level_tripped, S_IRUGO,
as3935_noise_level_tripped_show, NULL, 0);
static struct attribute *as3935_attributes[] = {
&iio_dev_attr_sensor_sensitivity.dev_attr.attr,
&iio_dev_attr_noise_level_tripped.dev_attr.attr,
NULL,
};
@ -246,7 +270,11 @@ static void as3935_event_work(struct work_struct *work)
case AS3935_EVENT_INT:
iio_trigger_poll_chained(st->trig);
break;
case AS3935_DISTURB_INT:
case AS3935_NOISE_INT:
mutex_lock(&st->lock);
st->noise_tripped = jiffies;
mutex_unlock(&st->lock);
dev_warn(&st->spi->dev, "noise level is too high\n");
break;
}
@ -269,15 +297,14 @@ static irqreturn_t as3935_interrupt_handler(int irq, void *private)
static void calibrate_as3935(struct as3935_state *st)
{
/* mask disturber interrupt bit */
as3935_write(st, AS3935_INT, BIT(5));
as3935_write(st, AS3935_DEFAULTS, 0x96);
as3935_write(st, AS3935_CALIBRATE, 0x96);
as3935_write(st, AS3935_TUNE_CAP,
BIT(5) | (st->tune_cap / TUNE_CAP_DIV));
mdelay(2);
as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV));
as3935_write(st, AS3935_NFLWDTH, st->nflwdth_reg);
}
#ifdef CONFIG_PM_SLEEP
@ -370,6 +397,15 @@ static int as3935_probe(struct spi_device *spi)
return -EINVAL;
}
ret = of_property_read_u32(np,
"ams,nflwdth", &st->nflwdth_reg);
if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
dev_err(&spi->dev,
"invalid nflwdth setting of %d\n",
st->nflwdth_reg);
return -EINVAL;
}
indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->channels = as3935_channels;
@ -384,6 +420,7 @@ static int as3935_probe(struct spi_device *spi)
return -ENOMEM;
st->trig = trig;
st->noise_tripped = jiffies - HZ;
trig->dev.parent = indio_dev->dev.parent;
iio_trigger_set_drvdata(trig, indio_dev);
trig->ops = &iio_interrupt_trigger_ops;

View File

@ -933,58 +933,52 @@ int input_set_keycode(struct input_dev *dev,
}
EXPORT_SYMBOL(input_set_keycode);
bool input_match_device_id(const struct input_dev *dev,
const struct input_device_id *id)
{
if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
if (id->bustype != dev->id.bustype)
return false;
if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
if (id->vendor != dev->id.vendor)
return false;
if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
if (id->product != dev->id.product)
return false;
if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
if (id->version != dev->id.version)
return false;
if (!bitmap_subset(id->evbit, dev->evbit, EV_MAX) ||
!bitmap_subset(id->keybit, dev->keybit, KEY_MAX) ||
!bitmap_subset(id->relbit, dev->relbit, REL_MAX) ||
!bitmap_subset(id->absbit, dev->absbit, ABS_MAX) ||
!bitmap_subset(id->mscbit, dev->mscbit, MSC_MAX) ||
!bitmap_subset(id->ledbit, dev->ledbit, LED_MAX) ||
!bitmap_subset(id->sndbit, dev->sndbit, SND_MAX) ||
!bitmap_subset(id->ffbit, dev->ffbit, FF_MAX) ||
!bitmap_subset(id->swbit, dev->swbit, SW_MAX) ||
!bitmap_subset(id->propbit, dev->propbit, INPUT_PROP_MAX)) {
return false;
}
return true;
}
EXPORT_SYMBOL(input_match_device_id);
static const struct input_device_id *input_match_device(struct input_handler *handler,
struct input_dev *dev)
{
const struct input_device_id *id;
for (id = handler->id_table; id->flags || id->driver_info; id++) {
if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
if (id->bustype != dev->id.bustype)
continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
if (id->vendor != dev->id.vendor)
continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
if (id->product != dev->id.product)
continue;
if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
if (id->version != dev->id.version)
continue;
if (!bitmap_subset(id->evbit, dev->evbit, EV_MAX))
continue;
if (!bitmap_subset(id->keybit, dev->keybit, KEY_MAX))
continue;
if (!bitmap_subset(id->relbit, dev->relbit, REL_MAX))
continue;
if (!bitmap_subset(id->absbit, dev->absbit, ABS_MAX))
continue;
if (!bitmap_subset(id->mscbit, dev->mscbit, MSC_MAX))
continue;
if (!bitmap_subset(id->ledbit, dev->ledbit, LED_MAX))
continue;
if (!bitmap_subset(id->sndbit, dev->sndbit, SND_MAX))
continue;
if (!bitmap_subset(id->ffbit, dev->ffbit, FF_MAX))
continue;
if (!bitmap_subset(id->swbit, dev->swbit, SW_MAX))
continue;
if (!handler->match || handler->match(handler, dev))
if (input_match_device_id(dev, id) &&
(!handler->match || handler->match(handler, dev))) {
return id;
}
}
return NULL;

View File

@ -747,6 +747,68 @@ static void joydev_cleanup(struct joydev *joydev)
input_close_device(handle);
}
/*
* These codes are copied from from hid-ids.h, unfortunately there is no common
* usb_ids/bt_ids.h header.
*/
#define USB_VENDOR_ID_SONY 0x054c
#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
#define USB_DEVICE_ID_SONY_PS4_CONTROLLER 0x05c4
#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_2 0x09cc
#define USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE 0x0ba0
#define USB_VENDOR_ID_THQ 0x20d6
#define USB_DEVICE_ID_THQ_PS3_UDRAW 0xcb17
#define ACCEL_DEV(vnd, prd) \
{ \
.flags = INPUT_DEVICE_ID_MATCH_VENDOR | \
INPUT_DEVICE_ID_MATCH_PRODUCT | \
INPUT_DEVICE_ID_MATCH_PROPBIT, \
.vendor = (vnd), \
.product = (prd), \
.propbit = { BIT_MASK(INPUT_PROP_ACCELEROMETER) }, \
}
static const struct input_device_id joydev_blacklist[] = {
/* Avoid touchpads and touchscreens */
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
},
/* Avoid tablets, digitisers and similar devices */
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
},
/* Disable accelerometers on composite devices */
ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2),
ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE),
ACCEL_DEV(USB_VENDOR_ID_THQ, USB_DEVICE_ID_THQ_PS3_UDRAW),
{ /* sentinel */ }
};
static bool joydev_dev_is_blacklisted(struct input_dev *dev)
{
const struct input_device_id *id;
for (id = joydev_blacklist; id->flags; id++) {
if (input_match_device_id(dev, id)) {
dev_dbg(&dev->dev,
"joydev: blacklisting '%s'\n", dev->name);
return true;
}
}
return false;
}
static bool joydev_dev_is_absolute_mouse(struct input_dev *dev)
{
DECLARE_BITMAP(jd_scratch, KEY_CNT);
@ -807,12 +869,8 @@ static bool joydev_dev_is_absolute_mouse(struct input_dev *dev)
static bool joydev_match(struct input_handler *handler, struct input_dev *dev)
{
/* Avoid touchpads and touchscreens */
if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_TOUCH, dev->keybit))
return false;
/* Avoid tablets, digitisers and similar devices */
if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_DIGI, dev->keybit))
/* Disable blacklisted devices */
if (joydev_dev_is_blacklisted(dev))
return false;
/* Avoid absolute mice */

View File

@ -234,14 +234,7 @@ static irqreturn_t tca8418_irq_handler(int irq, void *dev_id)
static int tca8418_configure(struct tca8418_keypad *keypad_data,
u32 rows, u32 cols)
{
int reg, error;
/* Write config register, if this fails assume device not present */
error = tca8418_write_byte(keypad_data, REG_CFG,
CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
if (error < 0)
return -ENODEV;
int reg, error = 0;
/* Assemble a mask for row and column registers */
reg = ~(~0 << rows);
@ -257,6 +250,12 @@ static int tca8418_configure(struct tca8418_keypad *keypad_data,
error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS2, reg >> 8);
error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS3, reg >> 16);
if (error)
return error;
error = tca8418_write_byte(keypad_data, REG_CFG,
CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
return error;
}
@ -268,6 +267,7 @@ static int tca8418_keypad_probe(struct i2c_client *client,
struct input_dev *input;
u32 rows = 0, cols = 0;
int error, row_shift, max_keys;
u8 reg;
/* Check i2c driver capabilities */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
@ -301,10 +301,10 @@ static int tca8418_keypad_probe(struct i2c_client *client,
keypad_data->client = client;
keypad_data->row_shift = row_shift;
/* Initialize the chip or fail if chip isn't present */
error = tca8418_configure(keypad_data, rows, cols);
if (error < 0)
return error;
/* Read key lock register, if this fails assume device not present */
error = tca8418_read_byte(keypad_data, REG_KEY_LCK_EC, &reg);
if (error)
return -ENODEV;
/* Configure input device */
input = devm_input_allocate_device(dev);
@ -340,6 +340,11 @@ static int tca8418_keypad_probe(struct i2c_client *client,
return error;
}
/* Initialize the chip */
error = tca8418_configure(keypad_data, rows, cols);
if (error < 0)
return error;
error = input_register_device(input);
if (error) {
dev_err(dev, "Unable to register input device, error: %d\n",

View File

@ -403,6 +403,7 @@ static const struct platform_device_id axp_pek_id_match[] = {
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, axp_pek_id_match);
static struct platform_driver axp20x_pek_driver = {
.probe = axp20x_pek_probe,
@ -417,4 +418,3 @@ module_platform_driver(axp20x_pek_driver);
MODULE_DESCRIPTION("axp20x Power Button");
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:axp20x-pek");

View File

@ -1635,13 +1635,25 @@ ims_pcu_get_cdc_union_desc(struct usb_interface *intf)
return NULL;
}
while (buflen > 0) {
while (buflen >= sizeof(*union_desc)) {
union_desc = (struct usb_cdc_union_desc *)buf;
if (union_desc->bLength > buflen) {
dev_err(&intf->dev, "Too large descriptor\n");
return NULL;
}
if (union_desc->bDescriptorType == USB_DT_CS_INTERFACE &&
union_desc->bDescriptorSubType == USB_CDC_UNION_TYPE) {
dev_dbg(&intf->dev, "Found union header\n");
return union_desc;
if (union_desc->bLength >= sizeof(*union_desc))
return union_desc;
dev_err(&intf->dev,
"Union descriptor to short (%d vs %zd\n)",
union_desc->bLength, sizeof(*union_desc));
return NULL;
}
buflen -= union_desc->bLength;

View File

@ -1709,8 +1709,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,
.sensor_pdata = {
.sensor_type = rmi_sensor_touchpad,
.axis_align.flip_y = true,
/* to prevent cursors jumps: */
.kernel_tracking = true,
.kernel_tracking = false,
.topbuttonpad = topbuttonpad,
},
.f30_data = {

View File

@ -72,6 +72,9 @@ struct goodix_ts_data {
#define GOODIX_REG_CONFIG_DATA 0x8047
#define GOODIX_REG_ID 0x8140
#define GOODIX_BUFFER_STATUS_READY BIT(7)
#define GOODIX_BUFFER_STATUS_TIMEOUT 20
#define RESOLUTION_LOC 1
#define MAX_CONTACTS_LOC 5
#define TRIGGER_LOC 6
@ -195,35 +198,53 @@ static int goodix_get_cfg_len(u16 id)
static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
{
unsigned long max_timeout;
int touch_num;
int error;
error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, data,
GOODIX_CONTACT_SIZE + 1);
if (error) {
dev_err(&ts->client->dev, "I2C transfer error: %d\n", error);
return error;
}
if (!(data[0] & 0x80))
return -EAGAIN;
touch_num = data[0] & 0x0f;
if (touch_num > ts->max_touch_num)
return -EPROTO;
if (touch_num > 1) {
data += 1 + GOODIX_CONTACT_SIZE;
error = goodix_i2c_read(ts->client,
GOODIX_READ_COOR_ADDR +
1 + GOODIX_CONTACT_SIZE,
data,
GOODIX_CONTACT_SIZE * (touch_num - 1));
if (error)
/*
* The 'buffer status' bit, which indicates that the data is valid, is
* not set as soon as the interrupt is raised, but slightly after.
* This takes around 10 ms to happen, so we poll for 20 ms.
*/
max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT);
do {
error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR,
data, GOODIX_CONTACT_SIZE + 1);
if (error) {
dev_err(&ts->client->dev, "I2C transfer error: %d\n",
error);
return error;
}
}
return touch_num;
if (data[0] & GOODIX_BUFFER_STATUS_READY) {
touch_num = data[0] & 0x0f;
if (touch_num > ts->max_touch_num)
return -EPROTO;
if (touch_num > 1) {
data += 1 + GOODIX_CONTACT_SIZE;
error = goodix_i2c_read(ts->client,
GOODIX_READ_COOR_ADDR +
1 + GOODIX_CONTACT_SIZE,
data,
GOODIX_CONTACT_SIZE *
(touch_num - 1));
if (error)
return error;
}
return touch_num;
}
usleep_range(1000, 2000); /* Poll every 1 - 2 ms */
} while (time_before(jiffies, max_timeout));
/*
* The Goodix panel will send spurious interrupts after a
* 'finger up' event, which will always cause a timeout.
*/
return 0;
}
static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)

View File

@ -663,12 +663,10 @@ static int stmfts_probe(struct i2c_client *client,
sdata->input->open = stmfts_input_open;
sdata->input->close = stmfts_input_close;
input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_X);
input_set_capability(sdata->input, EV_ABS, ABS_MT_POSITION_Y);
touchscreen_parse_properties(sdata->input, true, &sdata->prop);
input_set_abs_params(sdata->input, ABS_MT_POSITION_X, 0,
sdata->prop.max_x, 0, 0);
input_set_abs_params(sdata->input, ABS_MT_POSITION_Y, 0,
sdata->prop.max_y, 0, 0);
input_set_abs_params(sdata->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
input_set_abs_params(sdata->input, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
input_set_abs_params(sdata->input, ABS_MT_ORIENTATION, 0, 255, 0, 0);

View File

@ -161,7 +161,7 @@ static void titsc_step_config(struct titsc *ts_dev)
break;
case 5:
config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
ts_dev->bit_xn | ts_dev->bit_yp;
STEPCONFIG_XNP | STEPCONFIG_YPN;
break;
case 8:
config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);

View File

@ -107,6 +107,10 @@ struct its_node {
#define ITS_ITT_ALIGN SZ_256
/* The maximum number of VPEID bits supported by VLPI commands */
#define ITS_MAX_VPEID_BITS (16)
#define ITS_MAX_VPEID (1 << (ITS_MAX_VPEID_BITS))
/* Convert page order to size in bytes */
#define PAGE_ORDER_TO_SIZE(o) (PAGE_SIZE << (o))
@ -308,7 +312,7 @@ static void its_encode_size(struct its_cmd_block *cmd, u8 size)
static void its_encode_itt(struct its_cmd_block *cmd, u64 itt_addr)
{
its_mask_encode(&cmd->raw_cmd[2], itt_addr >> 8, 50, 8);
its_mask_encode(&cmd->raw_cmd[2], itt_addr >> 8, 51, 8);
}
static void its_encode_valid(struct its_cmd_block *cmd, int valid)
@ -318,7 +322,7 @@ static void its_encode_valid(struct its_cmd_block *cmd, int valid)
static void its_encode_target(struct its_cmd_block *cmd, u64 target_addr)
{
its_mask_encode(&cmd->raw_cmd[2], target_addr >> 16, 50, 16);
its_mask_encode(&cmd->raw_cmd[2], target_addr >> 16, 51, 16);
}
static void its_encode_collection(struct its_cmd_block *cmd, u16 col)
@ -358,7 +362,7 @@ static void its_encode_its_list(struct its_cmd_block *cmd, u16 its_list)
static void its_encode_vpt_addr(struct its_cmd_block *cmd, u64 vpt_pa)
{
its_mask_encode(&cmd->raw_cmd[3], vpt_pa >> 16, 50, 16);
its_mask_encode(&cmd->raw_cmd[3], vpt_pa >> 16, 51, 16);
}
static void its_encode_vpt_size(struct its_cmd_block *cmd, u8 vpt_size)
@ -1478,9 +1482,9 @@ static int its_setup_baser(struct its_node *its, struct its_baser *baser,
u64 val = its_read_baser(its, baser);
u64 esz = GITS_BASER_ENTRY_SIZE(val);
u64 type = GITS_BASER_TYPE(val);
u64 baser_phys, tmp;
u32 alloc_pages;
void *base;
u64 tmp;
retry_alloc_baser:
alloc_pages = (PAGE_ORDER_TO_SIZE(order) / psz);
@ -1496,8 +1500,24 @@ retry_alloc_baser:
if (!base)
return -ENOMEM;
baser_phys = virt_to_phys(base);
/* Check if the physical address of the memory is above 48bits */
if (IS_ENABLED(CONFIG_ARM64_64K_PAGES) && (baser_phys >> 48)) {
/* 52bit PA is supported only when PageSize=64K */
if (psz != SZ_64K) {
pr_err("ITS: no 52bit PA support when psz=%d\n", psz);
free_pages((unsigned long)base, order);
return -ENXIO;
}
/* Convert 52bit PA to 48bit field */
baser_phys = GITS_BASER_PHYS_52_to_48(baser_phys);
}
retry_baser:
val = (virt_to_phys(base) |
val = (baser_phys |
(type << GITS_BASER_TYPE_SHIFT) |
((esz - 1) << GITS_BASER_ENTRY_SIZE_SHIFT) |
((alloc_pages - 1) << GITS_BASER_PAGES_SHIFT) |
@ -1582,13 +1602,12 @@ retry_baser:
static bool its_parse_indirect_baser(struct its_node *its,
struct its_baser *baser,
u32 psz, u32 *order)
u32 psz, u32 *order, u32 ids)
{
u64 tmp = its_read_baser(its, baser);
u64 type = GITS_BASER_TYPE(tmp);
u64 esz = GITS_BASER_ENTRY_SIZE(tmp);
u64 val = GITS_BASER_InnerShareable | GITS_BASER_RaWaWb;
u32 ids = its->device_ids;
u32 new_order = *order;
bool indirect = false;
@ -1680,9 +1699,13 @@ static int its_alloc_tables(struct its_node *its)
continue;
case GITS_BASER_TYPE_DEVICE:
indirect = its_parse_indirect_baser(its, baser,
psz, &order,
its->device_ids);
case GITS_BASER_TYPE_VCPU:
indirect = its_parse_indirect_baser(its, baser,
psz, &order);
psz, &order,
ITS_MAX_VPEID_BITS);
break;
}
@ -2551,7 +2574,7 @@ static struct irq_chip its_vpe_irq_chip = {
static int its_vpe_id_alloc(void)
{
return ida_simple_get(&its_vpeid_ida, 0, 1 << 16, GFP_KERNEL);
return ida_simple_get(&its_vpeid_ida, 0, ITS_MAX_VPEID, GFP_KERNEL);
}
static void its_vpe_id_free(u16 id)
@ -2851,7 +2874,7 @@ static int its_init_vpe_domain(void)
return -ENOMEM;
}
BUG_ON(entries != vpe_proxy.dev->nr_ites);
BUG_ON(entries > vpe_proxy.dev->nr_ites);
raw_spin_lock_init(&vpe_proxy.lock);
vpe_proxy.next_victim = 0;

View File

@ -141,7 +141,7 @@ static void __init tangox_irq_init_chip(struct irq_chip_generic *gc,
for (i = 0; i < 2; i++) {
ct[i].chip.irq_ack = irq_gc_ack_set_bit;
ct[i].chip.irq_mask = irq_gc_mask_disable_reg;
ct[i].chip.irq_mask_ack = irq_gc_mask_disable_reg_and_ack;
ct[i].chip.irq_mask_ack = irq_gc_mask_disable_and_ack_set;
ct[i].chip.irq_unmask = irq_gc_unmask_enable_reg;
ct[i].chip.irq_set_type = tangox_irq_set_type;
ct[i].chip.name = gc->domain->name;

View File

@ -1797,12 +1797,19 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
*/
switch (msg->msg[1]) {
case CEC_MSG_GET_CEC_VERSION:
case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
case CEC_MSG_ABORT:
case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
case CEC_MSG_GIVE_PHYSICAL_ADDR:
case CEC_MSG_GIVE_OSD_NAME:
/*
* These messages reply with a directed message, so ignore if
* the initiator is Unregistered.
*/
if (!adap->passthrough && from_unregistered)
return 0;
/* Fall through */
case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
case CEC_MSG_GIVE_FEATURES:
case CEC_MSG_GIVE_PHYSICAL_ADDR:
/*
* Skip processing these messages if the passthrough mode
* is on.
@ -1810,7 +1817,7 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
if (adap->passthrough)
goto skip_processing;
/* Ignore if addressing is wrong */
if (is_broadcast || from_unregistered)
if (is_broadcast)
return 0;
break;

View File

@ -141,22 +141,39 @@ struct dvb_frontend_private {
static void dvb_frontend_invoke_release(struct dvb_frontend *fe,
void (*release)(struct dvb_frontend *fe));
static void dvb_frontend_free(struct kref *ref)
static void __dvb_frontend_free(struct dvb_frontend *fe)
{
struct dvb_frontend *fe =
container_of(ref, struct dvb_frontend, refcount);
struct dvb_frontend_private *fepriv = fe->frontend_priv;
if (!fepriv)
return;
dvb_free_device(fepriv->dvbdev);
dvb_frontend_invoke_release(fe, fe->ops.release);
kfree(fepriv);
fe->frontend_priv = NULL;
}
static void dvb_frontend_free(struct kref *ref)
{
struct dvb_frontend *fe =
container_of(ref, struct dvb_frontend, refcount);
__dvb_frontend_free(fe);
}
static void dvb_frontend_put(struct dvb_frontend *fe)
{
kref_put(&fe->refcount, dvb_frontend_free);
/*
* Check if the frontend was registered, as otherwise
* kref was not initialized yet.
*/
if (fe->frontend_priv)
kref_put(&fe->refcount, dvb_frontend_free);
else
__dvb_frontend_free(fe);
}
static void dvb_frontend_get(struct dvb_frontend *fe)

View File

@ -55,29 +55,57 @@ struct dib3000mc_state {
static u16 dib3000mc_read_word(struct dib3000mc_state *state, u16 reg)
{
u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff };
u8 rb[2];
struct i2c_msg msg[2] = {
{ .addr = state->i2c_addr >> 1, .flags = 0, .buf = wb, .len = 2 },
{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
{ .addr = state->i2c_addr >> 1, .flags = 0, .len = 2 },
{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .len = 2 },
};
u16 word;
u8 *b;
b = kmalloc(4, GFP_KERNEL);
if (!b)
return 0;
b[0] = (reg >> 8) | 0x80;
b[1] = reg;
b[2] = 0;
b[3] = 0;
msg[0].buf = b;
msg[1].buf = b + 2;
if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
dprintk("i2c read error on %d\n",reg);
return (rb[0] << 8) | rb[1];
word = (b[2] << 8) | b[3];
kfree(b);
return word;
}
static int dib3000mc_write_word(struct dib3000mc_state *state, u16 reg, u16 val)
{
u8 b[4] = {
(reg >> 8) & 0xff, reg & 0xff,
(val >> 8) & 0xff, val & 0xff,
};
struct i2c_msg msg = {
.addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
.addr = state->i2c_addr >> 1, .flags = 0, .len = 4
};
return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
int rc;
u8 *b;
b = kmalloc(4, GFP_KERNEL);
if (!b)
return -ENOMEM;
b[0] = reg >> 8;
b[1] = reg;
b[2] = val >> 8;
b[3] = val;
msg.buf = b;
rc = i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
kfree(b);
return rc;
}
static int dib3000mc_identify(struct dib3000mc_state *state)

View File

@ -753,13 +753,19 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
struct i2c_adapter *i2c,
unsigned int pll_desc_id)
{
u8 b1 [] = { 0 };
struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD,
.buf = b1, .len = 1 };
u8 *b1;
struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD, .len = 1 };
struct dvb_pll_priv *priv = NULL;
int ret;
const struct dvb_pll_desc *desc;
b1 = kmalloc(1, GFP_KERNEL);
if (!b1)
return NULL;
b1[0] = 0;
msg.buf = b1;
if ((id[dvb_pll_devcount] > DVB_PLL_UNDEFINED) &&
(id[dvb_pll_devcount] < ARRAY_SIZE(pll_list)))
pll_desc_id = id[dvb_pll_devcount];
@ -773,15 +779,19 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
fe->ops.i2c_gate_ctrl(fe, 1);
ret = i2c_transfer (i2c, &msg, 1);
if (ret != 1)
if (ret != 1) {
kfree(b1);
return NULL;
}
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
priv = kzalloc(sizeof(struct dvb_pll_priv), GFP_KERNEL);
if (priv == NULL)
if (!priv) {
kfree(b1);
return NULL;
}
priv->pll_i2c_address = pll_addr;
priv->i2c = i2c;
@ -811,6 +821,8 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
"insmod option" : "autodetected");
}
kfree(b1);
return fe;
}
EXPORT_SYMBOL(dvb_pll_attach);

View File

@ -112,7 +112,7 @@ config VIDEO_PXA27x
config VIDEO_QCOM_CAMSS
tristate "Qualcomm 8x16 V4L2 Camera Subsystem driver"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
select VIDEOBUF2_DMA_SG
select V4L2_FWNODE

View File

@ -2660,7 +2660,7 @@ static int vfe_get_selection(struct v4l2_subdev *sd,
*
* Return -EINVAL or zero on success
*/
int vfe_set_selection(struct v4l2_subdev *sd,
static int vfe_set_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_selection *sel)
{

View File

@ -682,6 +682,7 @@ void venus_helper_vb2_stop_streaming(struct vb2_queue *q)
hfi_session_abort(inst);
load_scale_clocks(core);
INIT_LIST_HEAD(&inst->registeredbufs);
}
venus_helper_buffers_done(inst, VB2_BUF_STATE_ERROR);

View File

@ -172,7 +172,8 @@ u32 s5p_cec_get_status(struct s5p_cec_dev *cec)
{
u32 status = 0;
status = readb(cec->reg + S5P_CEC_STATUS_0);
status = readb(cec->reg + S5P_CEC_STATUS_0) & 0xf;
status |= (readb(cec->reg + S5P_CEC_TX_STAT1) & 0xf) << 4;
status |= readb(cec->reg + S5P_CEC_STATUS_1) << 8;
status |= readb(cec->reg + S5P_CEC_STATUS_2) << 16;
status |= readb(cec->reg + S5P_CEC_STATUS_3) << 24;

View File

@ -92,7 +92,10 @@ static irqreturn_t s5p_cec_irq_handler(int irq, void *priv)
dev_dbg(cec->dev, "irq received\n");
if (status & CEC_STATUS_TX_DONE) {
if (status & CEC_STATUS_TX_ERROR) {
if (status & CEC_STATUS_TX_NACK) {
dev_dbg(cec->dev, "CEC_STATUS_TX_NACK set\n");
cec->tx = STATE_NACK;
} else if (status & CEC_STATUS_TX_ERROR) {
dev_dbg(cec->dev, "CEC_STATUS_TX_ERROR set\n");
cec->tx = STATE_ERROR;
} else {
@ -135,6 +138,12 @@ static irqreturn_t s5p_cec_irq_handler_thread(int irq, void *priv)
cec_transmit_done(cec->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
cec->tx = STATE_IDLE;
break;
case STATE_NACK:
cec_transmit_done(cec->adap,
CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_NACK,
0, 1, 0, 0);
cec->tx = STATE_IDLE;
break;
case STATE_ERROR:
cec_transmit_done(cec->adap,
CEC_TX_STATUS_MAX_RETRIES | CEC_TX_STATUS_ERROR,

Some files were not shown because too many files have changed in this diff Show More