Merge tag 'topic/drm-misc-2015-07-28' into drm-intel-next-queued

We need a few core drm patches to be able to merge Maarten's series to
convert DPMS over to atomic.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This commit is contained in:
Daniel Vetter 2015-08-06 14:27:09 +02:00
commit 06059d5090
603 changed files with 7897 additions and 3520 deletions

View File

@ -116,6 +116,7 @@ Shiraz Hashim <shiraz.linux.kernel@gmail.com> <shiraz.hashim@st.com>
Simon Kelley <simon@thekelleys.org.uk>
Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
Stephen Hemminger <shemminger@osdl.org>
Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Sumit Semwal <sumit.semwal@ti.com>
Tejun Heo <htejun@gmail.com>
Thomas Graf <tgraf@suug.ch>
@ -125,7 +126,9 @@ Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>

View File

@ -1234,10 +1234,8 @@ Description:
object is near the sensor, usually be observing
reflectivity of infrared or ultrasound emitted.
Often these sensors are unit less and as such conversion
to SI units is not possible. Where it is, the units should
be meters. If such a conversion is not possible, the reported
values should behave in the same way as a distance, i.e. lower
values indicate something is closer to the sensor.
to SI units is not possible. Higher proximity measurements
indicate closer objects, and vice versa.
What: /sys/.../iio:deviceX/in_illuminance_input
What: /sys/.../iio:deviceX/in_illuminance_raw

View File

@ -3383,7 +3383,7 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >TBD</td>
</tr>
<tr>
<td rowspan="2" valign="top" >omap</td>
<td valign="top" >omap</td>
<td valign="top" >Generic</td>
<td valign="top" >“zorder”</td>
<td valign="top" >RANGE</td>

View File

@ -60,4 +60,4 @@ Introduction
Document Author
---------------
Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics

View File

@ -258,6 +258,12 @@ cache metadata mode : ro if read-only, rw if read-write
no further I/O will be permitted and the status will just
contain the string 'Fail'. The userspace recovery tools
should then be used.
needs_check : 'needs_check' if set, '-' if not set
A metadata operation has failed, resulting in the needs_check
flag being set in the metadata's superblock. The metadata
device must be deactivated and checked/repaired before the
cache can be made fully operational again. '-' indicates
needs_check is not set.
Messages
--------

View File

@ -296,7 +296,7 @@ ii) Status
underlying device. When this is enabled when loading the table,
it can get disabled if the underlying device doesn't support it.
ro|rw
ro|rw|out_of_data_space
If the pool encounters certain types of device failures it will
drop into a read-only metadata mode in which no changes to
the pool metadata (like allocating new blocks) are permitted.
@ -314,6 +314,13 @@ ii) Status
module parameter can be used to change this timeout -- it
defaults to 60 seconds but may be disabled using a value of 0.
needs_check
A metadata operation has failed, resulting in the needs_check
flag being set in the metadata's superblock. The metadata
device must be deactivated and checked/repaired before the
thin-pool can be made fully operational again. '-' indicates
needs_check is not set.
iii) Messages
create_thin <dev id>

View File

@ -65,8 +65,10 @@ Optional properties:
- edid: verbatim EDID data block describing attached display.
- ddc: phandle describing the i2c bus handling the display data
channel
- port: A port node with endpoint definitions as defined in
- port@[0-1]: Port nodes with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
Port 0 is the input port connected to the IPU display interface,
port 1 is the output port connected to a panel.
example:
@ -75,9 +77,29 @@ display@di0 {
edid = [edid-data];
interface-pix-fmt = "rgb24";
port {
port@0 {
reg = <0>;
display_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
port@1 {
reg = <1>;
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
panel {
...
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};

View File

@ -952,6 +952,14 @@ When kbuild executes, the following steps are followed (roughly):
$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
mode) if this option is supported by $(AR).
ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS Overrides the kbuild defaults
These variables are appended to the KBUILD_CPPFLAGS,
KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the
top-level Makefile has set any other flags. This provides a
means for an architecture to override the defaults.
--- 6.2 Add prerequisites to archheaders:
The archheaders: rule is used to generate header files that

View File

@ -361,11 +361,11 @@ S: Supported
F: drivers/input/touchscreen/ad7879.c
ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
M: Jiri Kosina <jkosina@suse.cz>
M: Jiri Kosina <jkosina@suse.com>
S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/adm1025
@ -430,7 +430,7 @@ S: Maintained
F: drivers/macintosh/therm_adt746x.c
ADT7475 HARDWARE MONITOR DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/adt7475
@ -445,7 +445,7 @@ F: drivers/input/misc/adxl34x.c
ADVANSYS SCSI DRIVER
M: Matthew Wilcox <matthew@wil.cx>
M: Hannes Reinecke <hare@suse.de>
M: Hannes Reinecke <hare@suse.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: Documentation/scsi/advansys.txt
@ -506,7 +506,7 @@ F: drivers/scsi/aha152x*
F: drivers/scsi/pcmcia/aha152x*
AIC7XXX / AIC79XX SCSI DRIVER
M: Hannes Reinecke <hare@suse.de>
M: Hannes Reinecke <hare@suse.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/aic7xxx/
@ -636,9 +636,14 @@ M: Oded Gabbay <oded.gabbay@gmail.com>
L: dri-devel@lists.freedesktop.org
T: git git://people.freedesktop.org/~gabbayo/linux.git
S: Supported
F: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
F: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
F: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c
F: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v8.c
F: drivers/gpu/drm/amd/amdkfd/
F: drivers/gpu/drm/amd/include/cik_structs.h
F: drivers/gpu/drm/amd/include/kgd_kfd_interface.h
F: drivers/gpu/drm/amd/include/vi_structs.h
F: drivers/gpu/drm/radeon/radeon_kfd.c
F: drivers/gpu/drm/radeon/radeon_kfd.h
F: include/uapi/linux/kfd_ioctl.h
@ -746,7 +751,7 @@ S: Maintained
F: sound/aoa/
APM DRIVER
M: Jiri Kosina <jkosina@suse.cz>
M: Jiri Kosina <jkosina@suse.com>
S: Odd fixes
F: arch/x86/kernel/apm_32.c
F: include/linux/apm_bios.h
@ -1001,6 +1006,7 @@ ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
M: Baruch Siach <baruch@tkos.co.il>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/cx92755*
N: digicolor
ARM/EBSA110 MACHINE SUPPORT
@ -1324,7 +1330,7 @@ F: arch/arm/mach-pxa/include/mach/palmtc.h
F: arch/arm/mach-pxa/palmtc.c
ARM/PALM TREO SUPPORT
M: Tomas Cech <sleep_walker@suse.cz>
M: Tomas Cech <sleep_walker@suse.com>
L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
@ -2405,7 +2411,7 @@ F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
M: Chris Mason <clm@fb.com>
M: Josef Bacik <jbacik@fb.com>
M: David Sterba <dsterba@suse.cz>
M: David Sterba <dsterba@suse.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
@ -2748,7 +2754,7 @@ COCCINELLE/Semantic Patches (SmPL)
M: Julia Lawall <Julia.Lawall@lip6.fr>
M: Gilles Muller <Gilles.Muller@lip6.fr>
M: Nicolas Palix <nicolas.palix@imag.fr>
M: Michal Marek <mmarek@suse.cz>
M: Michal Marek <mmarek@suse.com>
L: cocci@systeme.lip6.fr (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
W: http://coccinelle.lip6.fr/
@ -2864,7 +2870,7 @@ F: kernel/cpuset.c
CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
M: Johannes Weiner <hannes@cmpxchg.org>
M: Michal Hocko <mhocko@suse.cz>
M: Michal Hocko <mhocko@kernel.org>
L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
S: Maintained
@ -2945,7 +2951,7 @@ F: arch/x86/kernel/cpuid.c
F: arch/x86/kernel/msr.c
CPU POWER MONITORING SUBSYSTEM
M: Thomas Renninger <trenn@suse.de>
M: Thomas Renninger <trenn@suse.com>
L: linux-pm@vger.kernel.org
S: Maintained
F: tools/power/cpupower/
@ -3175,7 +3181,7 @@ F: Documentation/networking/dmfe.txt
F: drivers/net/ethernet/dec/tulip/dmfe.c
DC390/AM53C974 SCSI driver
M: Hannes Reinecke <hare@suse.de>
M: Hannes Reinecke <hare@suse.com>
L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/am53c974.c
@ -3379,7 +3385,7 @@ W: http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
S: Maintained
DISKQUOTA
M: Jan Kara <jack@suse.cz>
M: Jan Kara <jack@suse.com>
S: Maintained
F: Documentation/filesystems/quota.txt
F: fs/quota/
@ -3435,7 +3441,7 @@ F: Documentation/hwmon/dme1737
F: drivers/hwmon/dme1737.c
DMI/SMBIOS SUPPORT
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
S: Maintained
T: quilt http://jdelvare.nerim.net/devel/linux/jdelvare-dmi/
F: Documentation/ABI/testing/sysfs-firmware-dmi-tables
@ -4051,7 +4057,7 @@ F: drivers/of/of_mdio.c
F: drivers/of/of_net.c
EXT2 FILE SYSTEM
M: Jan Kara <jack@suse.cz>
M: Jan Kara <jack@suse.com>
L: linux-ext4@vger.kernel.org
S: Maintained
F: Documentation/filesystems/ext2.txt
@ -4059,7 +4065,7 @@ F: fs/ext2/
F: include/linux/ext2*
EXT3 FILE SYSTEM
M: Jan Kara <jack@suse.cz>
M: Jan Kara <jack@suse.com>
M: Andrew Morton <akpm@linux-foundation.org>
M: Andreas Dilger <adilger.kernel@dilger.ca>
L: linux-ext4@vger.kernel.org
@ -4109,7 +4115,7 @@ F: drivers/video/fbdev/exynos/exynos_mipi*
F: include/video/exynos_mipi*
F71805F HARDWARE MONITORING DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/f71805f
@ -4244,7 +4250,7 @@ S: Maintained
F: drivers/block/rsxx/
FLOPPY DRIVER
M: Jiri Kosina <jkosina@suse.cz>
M: Jiri Kosina <jkosina@suse.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
S: Odd fixes
F: drivers/block/floppy.c
@ -4665,7 +4671,7 @@ F: drivers/media/usb/stk1160/
H8/300 ARCHITECTURE
M: Yoshinori Sato <ysato@users.sourceforge.jp>
L: uclinux-h8-devel@lists.sourceforge.jp
L: uclinux-h8-devel@lists.sourceforge.jp (moderated for non-subscribers)
W: http://uclinux-h8.sourceforge.jp
T: git git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git
S: Maintained
@ -4712,7 +4718,7 @@ S: Maintained
F: drivers/media/usb/hackrf/
HARDWARE MONITORING
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
@ -4815,7 +4821,7 @@ F: include/linux/pm.h
F: arch/*/include/asm/suspend*.h
HID CORE LAYER
M: Jiri Kosina <jkosina@suse.cz>
M: Jiri Kosina <jkosina@suse.com>
L: linux-input@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
@ -4824,7 +4830,7 @@ F: include/linux/hid*
F: include/uapi/linux/hid*
HID SENSOR HUB DRIVERS
M: Jiri Kosina <jkosina@suse.cz>
M: Jiri Kosina <jkosina@suse.com>
M: Jonathan Cameron <jic23@kernel.org>
M: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
L: linux-input@vger.kernel.org
@ -4958,7 +4964,7 @@ F: include/linux/hyperv.h
F: tools/hv/
I2C OVER PARALLEL PORT
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-parport
@ -4967,7 +4973,7 @@ F: drivers/i2c/busses/i2c-parport.c
F: drivers/i2c/busses/i2c-parport-light.c
I2C/SMBUS CONTROLLER DRIVERS FOR PC
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-ali1535
@ -5008,7 +5014,7 @@ F: drivers/i2c/busses/i2c-ismt.c
F: Documentation/i2c/busses/i2c-ismt
I2C/SMBUS STUB DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/i2c-stub.c
@ -5035,7 +5041,7 @@ L: linux-acpi@vger.kernel.org
S: Maintained
I2C-TAOS-EVM DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/i2c/busses/i2c-taos-evm
@ -5564,8 +5570,8 @@ F: include/uapi/linux/ip_vs.h
F: net/netfilter/ipvs/
IPWIRELESS DRIVER
M: Jiri Kosina <jkosina@suse.cz>
M: David Sterba <dsterba@suse.cz>
M: Jiri Kosina <jkosina@suse.com>
M: David Sterba <dsterba@suse.com>
S: Odd Fixes
F: drivers/tty/ipwireless/
@ -5685,7 +5691,7 @@ S: Maintained
F: drivers/isdn/hardware/eicon/
IT87 HARDWARE MONITORING DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/it87
@ -5752,7 +5758,7 @@ F: include/uapi/linux/jffs2.h
JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
M: Andrew Morton <akpm@linux-foundation.org>
M: Jan Kara <jack@suse.cz>
M: Jan Kara <jack@suse.com>
L: linux-ext4@vger.kernel.org
S: Maintained
F: fs/jbd/
@ -5816,7 +5822,7 @@ S: Maintained
F: fs/autofs4/
KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
M: Michal Marek <mmarek@suse.cz>
M: Michal Marek <mmarek@suse.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git for-next
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git rc-fixes
L: linux-kbuild@vger.kernel.org
@ -5880,7 +5886,7 @@ F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
M: Alexander Graf <agraf@suse.de>
M: Alexander Graf <agraf@suse.com>
L: kvm-ppc@vger.kernel.org
W: http://kvm.qumranet.com
T: git git://github.com/agraf/linux-2.6.git
@ -6037,7 +6043,7 @@ F: drivers/leds/
F: include/linux/leds.h
LEGACY EEPROM DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
S: Maintained
F: Documentation/misc-devices/eeprom
F: drivers/misc/eeprom/eeprom.c
@ -6090,7 +6096,7 @@ F: include/linux/ata.h
F: include/linux/libata.h
LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
M: Viresh Kumar <viresh.linux@gmail.com>
M: Viresh Kumar <vireshk@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
@ -6251,8 +6257,8 @@ F: drivers/platform/x86/hp_accel.c
LIVE PATCHING
M: Josh Poimboeuf <jpoimboe@redhat.com>
M: Seth Jennings <sjenning@redhat.com>
M: Jiri Kosina <jkosina@suse.cz>
M: Vojtech Pavlik <vojtech@suse.cz>
M: Jiri Kosina <jkosina@suse.com>
M: Vojtech Pavlik <vojtech@suse.com>
S: Maintained
F: kernel/livepatch/
F: include/linux/livepatch.h
@ -6278,21 +6284,21 @@ S: Maintained
F: drivers/hwmon/lm73.c
LM78 HARDWARE MONITOR DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm78
F: drivers/hwmon/lm78.c
LM83 HARDWARE MONITOR DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm83
F: drivers/hwmon/lm83.c
LM90 HARDWARE MONITOR DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/lm90
@ -7019,6 +7025,7 @@ F: include/uapi/linux/netfilter/
F: net/*/netfilter.c
F: net/*/netfilter/
F: net/netfilter/
F: net/bridge/br_netfilter*.c
NETLABEL
M: Paul Moore <paul@paul-moore.com>
@ -7718,7 +7725,7 @@ S: Maintained
F: drivers/char/pc8736x_gpio.c
PC87427 HARDWARE MONITORING DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/pc87427
@ -7995,7 +8002,7 @@ S: Maintained
F: drivers/pinctrl/samsung/
PIN CONTROLLER - ST SPEAR
M: Viresh Kumar <viresh.linux@gmail.com>
M: Viresh Kumar <vireshk@kernel.org>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@ -8003,7 +8010,7 @@ S: Maintained
F: drivers/pinctrl/spear/
PKTCDVD DRIVER
M: Jiri Kosina <jkosina@suse.cz>
M: Jiri Kosina <jkosina@suse.com>
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
@ -8894,7 +8901,7 @@ S: Maintained
F: drivers/tty/serial/
SYNOPSYS DESIGNWARE DMAC DRIVER
M: Viresh Kumar <viresh.linux@gmail.com>
M: Viresh Kumar <vireshk@kernel.org>
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
S: Maintained
F: include/linux/dma/dw.h
@ -9061,7 +9068,7 @@ S: Maintained
F: drivers/mmc/host/sdhci-s3c*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
M: Viresh Kumar <viresh.linux@gmail.com>
M: Viresh Kumar <vireshk@kernel.org>
L: spear-devel@list.st.com
L: linux-mmc@vger.kernel.org
S: Maintained
@ -9423,7 +9430,7 @@ F: Documentation/hwmon/sch5627
F: drivers/hwmon/sch5627.c
SMSC47B397 HARDWARE MONITOR DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/smsc47b397
@ -9472,7 +9479,7 @@ S: Supported
F: drivers/media/pci/solo6x10/
SOFTWARE RAID (Multiple Disks) SUPPORT
M: Neil Brown <neilb@suse.de>
M: Neil Brown <neilb@suse.com>
L: linux-raid@vger.kernel.org
S: Supported
F: drivers/md/
@ -9515,7 +9522,7 @@ F: drivers/memstick/core/ms_block.*
SOUND
M: Jaroslav Kysela <perex@perex.cz>
M: Takashi Iwai <tiwai@suse.de>
M: Takashi Iwai <tiwai@suse.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://www.alsa-project.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
@ -9599,7 +9606,7 @@ S: Maintained
F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
M: Viresh Kumar <viresh.linux@gmail.com>
M: Viresh Kumar <vireshk@kernel.org>
M: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -9608,7 +9615,7 @@ S: Maintained
F: arch/arm/mach-spear/
SPEAR CLOCK FRAMEWORK SUPPORT
M: Viresh Kumar <viresh.linux@gmail.com>
M: Viresh Kumar <vireshk@kernel.org>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@ -10398,7 +10405,7 @@ K: ^Subject:.*(?i)trivial
TTY LAYER
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
M: Jiri Slaby <jslaby@suse.cz>
M: Jiri Slaby <jslaby@suse.com>
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
F: Documentation/serial/
@ -10472,7 +10479,7 @@ F: arch/m68k/*/*_no.*
F: arch/m68k/include/asm/*_no.*
UDF FILESYSTEM
M: Jan Kara <jack@suse.cz>
M: Jan Kara <jack@suse.com>
S: Maintained
F: Documentation/filesystems/udf.txt
F: fs/udf/
@ -10615,7 +10622,7 @@ F: drivers/usb/gadget/
F: include/linux/usb/gadget*
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
M: Jiri Kosina <jkosina@suse.cz>
M: Jiri Kosina <jkosina@suse.com>
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
@ -10740,7 +10747,7 @@ S: Maintained
F: drivers/usb/host/uhci*
USB "USBNET" DRIVER FRAMEWORK
M: Oliver Neukum <oneukum@suse.de>
M: Oliver Neukum <oneukum@suse.com>
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
@ -11067,7 +11074,7 @@ F: Documentation/hwmon/w83793
F: drivers/hwmon/w83793.c
W83795 HARDWARE MONITORING DRIVER
M: Jean Delvare <jdelvare@suse.de>
M: Jean Delvare <jdelvare@suse.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/w83795.c

View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 2
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
@ -780,10 +780,11 @@ endif
include scripts/Makefile.kasan
include scripts/Makefile.extrawarn
# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
KBUILD_CPPFLAGS += $(KCPPFLAGS)
KBUILD_AFLAGS += $(KAFLAGS)
KBUILD_CFLAGS += $(KCFLAGS)
# Add any arch overrides and user supplied CPPFLAGS, AFLAGS and CFLAGS as the
# last assignments
KBUILD_CPPFLAGS += $(ARCH_CPPFLAGS) $(KCPPFLAGS)
KBUILD_AFLAGS += $(ARCH_AFLAGS) $(KAFLAGS)
KBUILD_CFLAGS += $(ARCH_CFLAGS) $(KCFLAGS)
# Use --build-id when available.
LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\

View File

@ -221,6 +221,10 @@ config ARCH_TASK_STRUCT_ALLOCATOR
config ARCH_THREAD_INFO_ALLOCATOR
bool
# Select if arch wants to size task_struct dynamically via arch_task_struct_size:
config ARCH_WANTS_DYNAMIC_TASK_STRUCT
bool
config HAVE_REGS_AND_STACK_ACCESS_API
bool
help

View File

@ -5,6 +5,7 @@ generic-y += cputime.h
generic-y += exec.h
generic-y += irq_work.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += preempt.h
generic-y += sections.h
generic-y += trace_clock.h

View File

@ -1,15 +0,0 @@
/*
* Architecture specific mm hooks
*
* Copyright (C) 2015, IBM Corporation
* Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_ALPHA_MM_ARCH_HOOKS_H
#define _ASM_ALPHA_MM_ARCH_HOOKS_H
#endif /* _ASM_ALPHA_MM_ARCH_HOOKS_H */

View File

@ -115,6 +115,7 @@ if ISA_ARCOMPACT
config ARC_CPU_750D
bool "ARC750D"
select ARC_CANT_LLSC
help
Support for ARC750 core
@ -362,7 +363,7 @@ config ARC_CANT_LLSC
config ARC_HAS_LLSC
bool "Insn: LLOCK/SCOND (efficient atomic ops)"
default y
depends on !ARC_CPU_750D && !ARC_CANT_LLSC
depends on !ARC_CANT_LLSC
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"

View File

@ -49,7 +49,8 @@ endif
ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
# Generic build system uses -O2, we want -O3
cflags-y += -O3
# Note: No need to add to cflags-y as that happens anyways
ARCH_CFLAGS += -O3
endif
# small data is default for elf32 tool-chain. If not usable, disable it

View File

@ -12,7 +12,7 @@
/ {
compatible = "snps,arc";
clock-frequency = <75000000>;
clock-frequency = <90000000>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -12,7 +12,7 @@
/ {
compatible = "snps,arc";
clock-frequency = <75000000>;
clock-frequency = <90000000>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -22,6 +22,7 @@ generic-y += kvm_para.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += mman.h
generic-y += msgbuf.h
generic-y += param.h

View File

@ -50,8 +50,7 @@ static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
* done for const @nr, but no code is generated due to gcc \
* const prop. \
*/ \
if (__builtin_constant_p(nr)) \
nr &= 0x1f; \
nr &= 0x1f; \
\
__asm__ __volatile__( \
"1: llock %0, [%1] \n" \
@ -82,8 +81,7 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *
\
m += nr >> 5; \
\
if (__builtin_constant_p(nr)) \
nr &= 0x1f; \
nr &= 0x1f; \
\
/* \
* Explicit full memory barrier needed before/after as \
@ -129,16 +127,13 @@ static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
unsigned long temp, flags; \
m += nr >> 5; \
\
if (__builtin_constant_p(nr)) \
nr &= 0x1f; \
\
/* \
* spin lock/unlock provide the needed smp_mb() before/after \
*/ \
bitops_lock(flags); \
\
temp = *m; \
*m = temp c_op (1UL << nr); \
*m = temp c_op (1UL << (nr & 0x1f)); \
\
bitops_unlock(flags); \
}
@ -149,17 +144,14 @@ static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *
unsigned long old, flags; \
m += nr >> 5; \
\
if (__builtin_constant_p(nr)) \
nr &= 0x1f; \
\
bitops_lock(flags); \
\
old = *m; \
*m = old c_op (1 << nr); \
*m = old c_op (1UL << (nr & 0x1f)); \
\
bitops_unlock(flags); \
\
return (old & (1 << nr)) != 0; \
return (old & (1UL << (nr & 0x1f))) != 0; \
}
#endif /* CONFIG_ARC_HAS_LLSC */
@ -174,11 +166,8 @@ static inline void __##op##_bit(unsigned long nr, volatile unsigned long *m) \
unsigned long temp; \
m += nr >> 5; \
\
if (__builtin_constant_p(nr)) \
nr &= 0x1f; \
\
temp = *m; \
*m = temp c_op (1UL << nr); \
*m = temp c_op (1UL << (nr & 0x1f)); \
}
#define __TEST_N_BIT_OP(op, c_op, asm_op) \
@ -187,13 +176,10 @@ static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long
unsigned long old; \
m += nr >> 5; \
\
if (__builtin_constant_p(nr)) \
nr &= 0x1f; \
\
old = *m; \
*m = old c_op (1 << nr); \
*m = old c_op (1UL << (nr & 0x1f)); \
\
return (old & (1 << nr)) != 0; \
return (old & (1UL << (nr & 0x1f))) != 0; \
}
#define BIT_OPS(op, c_op, asm_op) \
@ -224,10 +210,7 @@ test_bit(unsigned int nr, const volatile unsigned long *addr)
addr += nr >> 5;
if (__builtin_constant_p(nr))
nr &= 0x1f;
mask = 1 << nr;
mask = 1UL << (nr & 0x1f);
return ((mask & *addr) != 0);
}

View File

@ -16,12 +16,15 @@
#include <linux/uaccess.h>
#include <asm/errno.h>
#ifdef CONFIG_ARC_HAS_LLSC
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
\
__asm__ __volatile__( \
"1: ld %1, [%2] \n" \
"1: llock %1, [%2] \n" \
insn "\n" \
"2: st %0, [%2] \n" \
"2: scond %0, [%2] \n" \
" bnz 1b \n" \
" mov %0, 0 \n" \
"3: \n" \
" .section .fixup,\"ax\" \n" \
@ -39,6 +42,33 @@
: "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \
: "cc", "memory")
#else /* !CONFIG_ARC_HAS_LLSC */
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
\
__asm__ __volatile__( \
"1: ld %1, [%2] \n" \
insn "\n" \
"2: st %0, [%2] \n" \
" mov %0, 0 \n" \
"3: \n" \
" .section .fixup,\"ax\" \n" \
" .align 4 \n" \
"4: mov %0, %4 \n" \
" b 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" .align 4 \n" \
" .word 1b, 4b \n" \
" .word 2b, 4b \n" \
" .previous \n" \
\
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \
: "cc", "memory")
#endif
static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
{
int op = (encoded_op >> 28) & 7;
@ -123,11 +153,17 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
pagefault_disable();
/* TBD : can use llock/scond */
__asm__ __volatile__(
"1: ld %0, [%3] \n"
" brne %0, %1, 3f \n"
"2: st %2, [%3] \n"
#ifdef CONFIG_ARC_HAS_LLSC
"1: llock %0, [%3] \n"
" brne %0, %1, 3f \n"
"2: scond %2, [%3] \n"
" bnz 1b \n"
#else
"1: ld %0, [%3] \n"
" brne %0, %1, 3f \n"
"2: st %2, [%3] \n"
#endif
"3: \n"
" .section .fixup,\"ax\" \n"
"4: mov %0, %4 \n"

View File

@ -1,15 +0,0 @@
/*
* Architecture specific mm hooks
*
* Copyright (C) 2015, IBM Corporation
* Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_ARC_MM_ARCH_HOOKS_H
#define _ASM_ARC_MM_ARCH_HOOKS_H
#endif /* _ASM_ARC_MM_ARCH_HOOKS_H */

View File

@ -106,7 +106,7 @@ struct callee_regs {
long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
};
#define instruction_pointer(regs) ((regs)->ret)
#define instruction_pointer(regs) (unsigned long)((regs)->ret)
#define profile_pc(regs) instruction_pointer(regs)
/* return 1 if user mode or 0 if kernel mode */

View File

@ -12,7 +12,6 @@
#include <linux/of.h>
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
#include "../../drivers/irqchip/irqchip.h"
#include <asm/irq.h>
/*

View File

@ -12,7 +12,6 @@
#include <linux/of.h>
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
#include "../../drivers/irqchip/irqchip.h"
#include <asm/irq.h>
/*

View File

@ -175,7 +175,6 @@ void mcip_init_early_smp(void)
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include "../../drivers/irqchip/irqchip.h"
/*
* Set the DEST for @cmn_irq to @cpu_mask (1 bit per core)
@ -218,11 +217,28 @@ static void idu_irq_unmask(struct irq_data *data)
raw_spin_unlock_irqrestore(&mcip_lock, flags);
}
#ifdef CONFIG_SMP
static int
idu_irq_set_affinity(struct irq_data *d, const struct cpumask *cpumask, bool f)
idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
bool force)
{
unsigned long flags;
cpumask_t online;
/* errout if no online cpu per @cpumask */
if (!cpumask_and(&online, cpumask, cpu_online_mask))
return -EINVAL;
raw_spin_lock_irqsave(&mcip_lock, flags);
idu_set_dest(data->hwirq, cpumask_bits(&online)[0]);
idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
raw_spin_unlock_irqrestore(&mcip_lock, flags);
return IRQ_SET_MASK_OK;
}
#endif
static struct irq_chip idu_irq_chip = {
.name = "MCIP IDU Intc",
@ -330,8 +346,7 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
if (!i)
idu_first_irq = irq;
irq_set_handler_data(irq, domain);
irq_set_chained_handler(irq, idu_cascade_isr);
irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
}
__mcip_cmd(CMD_IDU_ENABLE, 0);

View File

@ -142,17 +142,22 @@ static void read_arc_build_cfg_regs(void)
}
static const struct cpuinfo_data arc_cpu_tbl[] = {
#ifdef CONFIG_ISA_ARCOMPACT
{ {0x20, "ARC 600" }, 0x2F},
{ {0x30, "ARC 700" }, 0x33},
{ {0x34, "ARC 700 R4.10"}, 0x34},
{ {0x35, "ARC 700 R4.11"}, 0x35},
{ {0x50, "ARC HS38" }, 0x51},
#else
{ {0x50, "ARC HS38 R2.0"}, 0x51},
{ {0x52, "ARC HS38 R2.1"}, 0x52},
#endif
{ {0x00, NULL } }
};
#define IS_AVAIL1(v, str) ((v) ? str : "")
#define IS_USED(cfg) (IS_ENABLED(cfg) ? "" : "(not used) ")
#define IS_AVAIL2(v, str, cfg) IS_AVAIL1(v, str), IS_AVAIL1(v, IS_USED(cfg))
#define IS_AVAIL1(v, s) ((v) ? s : "")
#define IS_USED_RUN(v) ((v) ? "" : "(not used) ")
#define IS_USED_CFG(cfg) IS_USED_RUN(IS_ENABLED(cfg))
#define IS_AVAIL2(v, s, cfg) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
{
@ -226,7 +231,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
}
n += scnprintf(buf + n, len - n, "%s",
IS_USED(CONFIG_ARC_HAS_HW_MPY));
IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
}
n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",

View File

@ -58,7 +58,6 @@ static void show_callee_regs(struct callee_regs *cregs)
static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
{
struct path path;
char *path_nm = NULL;
struct mm_struct *mm;
struct file *exe_file;

View File

@ -468,10 +468,18 @@ static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
{
#ifdef CONFIG_ISA_ARCV2
/*
* SLC is shared between all cores and concurrent aux operations from
* multiple cores need to be serialized using a spinlock
* A concurrent operation can be silently ignored and/or the old/new
* operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop
* below)
*/
static DEFINE_SPINLOCK(lock);
unsigned long flags;
unsigned int ctrl;
local_irq_save(flags);
spin_lock_irqsave(&lock, flags);
/*
* The Region Flush operation is specified by CTRL.RGN_OP[11..9]
@ -504,7 +512,7 @@ noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
local_irq_restore(flags);
spin_unlock_irqrestore(&lock, flags);
#endif
}

View File

@ -60,8 +60,8 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
/* This is kernel Virtual address (0x7000_0000 based) */
kvaddr = ioremap_nocache((unsigned long)paddr, size);
if (kvaddr != NULL)
memset(kvaddr, 0, size);
if (kvaddr == NULL)
return NULL;
/* This is bus address, platform dependent */
*dma_handle = (dma_addr_t)paddr;

View File

@ -74,6 +74,7 @@
audio_codec: tlv320aic3106@1b {
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
ai3x-micbias-vg = <0x2>;
};
accel: lis331dlh@1d {
@ -153,7 +154,7 @@
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"LINE1L", "Line In";
"MIC3L", "Mic3L Switch";
};
&mcasp0 {
@ -438,41 +439,50 @@
regulators {
dcdc1_reg: regulator@0 {
/* VDD_1V8 system supply */
regulator-always-on;
};
dcdc2_reg: regulator@1 {
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1325000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
dcdc3_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1150000>;
regulator-max-microvolt = <1325000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: regulator@3 {
/* VRTC 1.8V always-on supply */
regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
/* 3.3V rail */
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
/* VDD_3V3A 3.3V rail */
regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo4_reg: regulator@6 {
/* VDD_3V3B 3.3V rail */
regulator-name = "vdd_3v3b";
regulator-always-on;
};
};
};

View File

@ -22,6 +22,7 @@
MATRIX_KEY(0x00, 0x02, KEY_F1)
MATRIX_KEY(0x00, 0x03, KEY_B)
MATRIX_KEY(0x00, 0x04, KEY_F10)
MATRIX_KEY(0x00, 0x05, KEY_RO)
MATRIX_KEY(0x00, 0x06, KEY_N)
MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
@ -34,6 +35,7 @@
MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
MATRIX_KEY(0x01, 0x09, KEY_F9)
MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
MATRIX_KEY(0x02, 0x01, KEY_TAB)
@ -45,6 +47,7 @@
MATRIX_KEY(0x02, 0x07, KEY_102ND)
MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
MATRIX_KEY(0x02, 0x09, KEY_F8)
MATRIX_KEY(0x02, 0x0a, KEY_YEN)
MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
MATRIX_KEY(0x03, 0x02, KEY_F2)
@ -53,6 +56,7 @@
MATRIX_KEY(0x03, 0x06, KEY_6)
MATRIX_KEY(0x03, 0x08, KEY_MINUS)
MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
MATRIX_KEY(0x04, 0x01, KEY_A)

View File

@ -686,7 +686,8 @@
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan1_pins_default>;
pinctrl-names = "default", "sleep", "active";
pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};

View File

@ -587,9 +587,10 @@
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan1_pins_default>;
pinctrl-names = "default", "sleep", "active";
pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};
&qspi {

View File

@ -468,6 +468,7 @@
interrupts = <36 37 38 39 40 41 42 43 44>;
status = "disabled";
clocks = <&clks 26>;
#io-channel-cells = <1>;
};
spdif@80054000 {

View File

@ -108,7 +108,7 @@
};
gpt1: timer@10003000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
@ -117,7 +117,7 @@
};
gpt2: timer@10004000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10004000 0x1000>;
interrupts = <25>;
clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
@ -126,7 +126,7 @@
};
gpt3: timer@10005000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10005000 0x1000>;
interrupts = <24>;
clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
@ -376,7 +376,7 @@
};
gpt4: timer@10019000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10019000 0x1000>;
interrupts = <4>;
clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
@ -385,7 +385,7 @@
};
gpt5: timer@1001a000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001a000 0x1000>;
interrupts = <3>;
clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
@ -436,7 +436,7 @@
};
gpt6: timer@1001f000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001f000 0x1000>;
interrupts = <2>;
clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,

View File

@ -295,9 +295,10 @@
&tve {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vga_sync>;
ddc-i2c-bus = <&i2c2>;
fsl,tve-mode = "vga";
fsl,hsync-pin = <4>;
fsl,vsync-pin = <6>;
fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */
fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */
status = "okay";
};

View File

@ -86,7 +86,7 @@
gpio,syscon-dev = <&devctrl 0x240>;
};
pcie@21020000 {
pcie1: pcie@21020000 {
compatible = "ti,keystone-pcie","snps,dw-pcie";
clocks = <&clkpcie1>;
clock-names = "pcie";
@ -96,6 +96,7 @@
ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
status = "disabled";
device_type = "pci";
num-lanes = <2>;

View File

@ -286,7 +286,7 @@
ti,syscon-dev = <&devctrl 0x2a0>;
};
pcie@21800000 {
pcie0: pcie@21800000 {
compatible = "ti,keystone-pcie", "snps,dw-pcie";
clocks = <&clkpcie>;
clock-names = "pcie";
@ -296,6 +296,7 @@
ranges = <0x81000000 0 0 0x23250000 0 0x4000
0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
status = "disabled";
device_type = "pci";
num-lanes = <2>;

View File

@ -120,7 +120,7 @@
lcd0: display@0 {
compatible = "lgphilips,lb035q02";
label = "lcd";
label = "lcd35";
reg = <1>; /* CS1 */
spi-max-frequency = <10000000>;

View File

@ -98,7 +98,7 @@
lcd0: display@0 {
compatible = "samsung,lte430wq-f0c", "panel-dpi";
label = "lcd";
label = "lcd43";
pinctrl-names = "default";
pinctrl-0 = <&lte430_pins>;

View File

@ -551,6 +551,7 @@
reg = <0x4a066000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_dsp";
#iommu-cells = <0>;
};
mmu_ipu: mmu@55082000 {
@ -558,6 +559,7 @@
reg = <0x55082000 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu";
#iommu-cells = <0>;
ti,iommu-bus-err-back;
};

View File

@ -612,6 +612,7 @@
reg = <0x4a066000 0x100>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_dsp";
#iommu-cells = <0>;
};
mmu_ipu: mmu@55082000 {
@ -619,6 +620,7 @@
reg = <0x55082000 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmu_ipu";
#iommu-cells = <0>;
ti,iommu-bus-err-back;
};

View File

@ -60,6 +60,22 @@
rxc-skew-ps = <2000>;
};
&gpio2 {
status = "okay";
};
&i2c1 {
status = "okay";
accel1: accelerometer@53 {
compatible = "adi,adxl345";
reg = <0x53>;
interrupt-parent = <&portc>;
interrupts = <3 2>;
};
};
&mmc0 {
vmmc-supply = <&regulator_3_3v>;
vqmmc-supply = <&regulator_3_3v>;
@ -68,19 +84,3 @@
&usb1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&i2c1{
status = "okay";
accel1: accel1@53{
compatible = "adxl34x";
reg = <0x53>;
interrupt-parent = < &portc >;
interrupts = <3 2>;
};
};

View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr1310 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr1310 SoCs
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr1340 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr1340 SoCs
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr13xx SoCs
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr300 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr300 SoC
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr310 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr310 SoC
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr320 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr320 SoC
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr3xx SoCs
*
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
* Copyright 2012 Viresh Kumar <vireshk@kernel.org>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

View File

@ -17,6 +17,13 @@
model = "ST-Ericsson U8540 platform with Device Tree";
compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
memory@0 {
device_type = "memory";
reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;

View File

@ -16,6 +16,13 @@
model = "ST-Ericsson CCU9540 platform with Device Tree";
compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
memory {
reg = <0x00000000 0x20000000>;
};

View File

@ -971,7 +971,7 @@
power-domains = <&pm_domains DOMAIN_VAPE>;
};
uart@80120000 {
ux500_serial0: uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
@ -986,7 +986,7 @@
status = "disabled";
};
uart@80121000 {
ux500_serial1: uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
@ -1001,7 +1001,7 @@
status = "disabled";
};
uart@80007000 {
ux500_serial2: uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;

View File

@ -32,11 +32,11 @@
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@80121000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart1_default_mode>;
pinctrl-1 = <&uart1_sleep_mode>;
status = "okay";
};
uart@80007000 {

View File

@ -17,6 +17,13 @@
model = "ST-Ericsson HREF (pre-v60) and ST UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {

View File

@ -16,4 +16,11 @@
/ {
model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
compatible = "st-ericsson,mop500", "st-ericsson,u8500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
};

View File

@ -23,6 +23,11 @@
};
soc {
/* Enable UART1 on this board */
uart@80121000 {
status = "okay";
};
i2c@80004000 {
tps61052@33 {
compatible = "tps61052";

View File

@ -19,6 +19,13 @@
model = "ST-Ericsson HREF (v60+) and ST UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
soc {
/* Reset line for the BU21013 touchscreen */
i2c@80110000 {

View File

@ -18,4 +18,11 @@
/ {
model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
};

View File

@ -43,15 +43,26 @@
<&vaudio_hf_hrefv60_mode>,
<&gbf_hrefv60_mode>,
<&hdtv_hrefv60_mode>,
<&touch_hrefv60_mode>;
<&touch_hrefv60_mode>,
<&gpios_hrefv60_mode>;
sdi0 {
/* SD card detect GPIO pin, extend default state */
sdi0_default_mode: sdi0_default {
/* SD card detect GPIO pin, extend default state */
default_hrefv60_cfg1 {
pins = "GPIO95_E8";
ste,config = <&gpio_in_pu>;
};
/* VMMCI level-shifter enable */
default_hrefv60_cfg2 {
pins = "GPIO169_D22";
ste,config = <&gpio_out_lo>;
};
/* VMMCI level-shifter voltage select */
default_hrefv60_cfg3 {
pins = "GPIO5_AG6";
ste,config = <&gpio_out_hi>;
};
};
};
ipgpio {
@ -213,6 +224,16 @@
};
};
};
gpios {
/* Dangling GPIO pins */
gpios_hrefv60_mode: gpios_hrefv60 {
default_cfg1 {
/* Normally UART1 RXD, now dangling */
pins = "GPIO4_AH6";
ste,config = <&in_pu>;
};
};
};
};
};
};

View File

@ -18,6 +18,13 @@
model = "Calao Systems Snowball platform with device tree";
compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
memory {
reg = <0x00000000 0x20000000>;
};
@ -223,11 +230,11 @@
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@80121000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart1_default_mode>;
pinctrl-1 = <&uart1_sleep_mode>;
status = "okay";
};
uart@80007000 {
@ -452,7 +459,21 @@
pins = "GPIO21_AB3"; /* DAT31DIR */
ste,config = <&out_hi>;
};
/* SD card detect GPIO pin, extend default state */
snowball_cfg2 {
pins = "GPIO218_AH11";
ste,config = <&gpio_in_pu>;
};
/* VMMCI level-shifter enable */
snowball_cfg3 {
pins = "GPIO217_AH12";
ste,config = <&gpio_out_lo>;
};
/* VMMCI level-shifter voltage select */
snowball_cfg4 {
pins = "GPIO228_AJ6";
ste,config = <&gpio_out_hi>;
};
};
};
ssp0 {

View File

@ -13,6 +13,7 @@ generic-y += kdebug.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += msgbuf.h
generic-y += param.h
generic-y += parport.h

View File

@ -286,7 +286,7 @@ extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
*/
static inline phys_addr_t __virt_to_idmap(unsigned long x)
{
if (arch_virt_to_idmap)
if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap)
return arch_virt_to_idmap(x);
else
return __virt_to_phys(x);

View File

@ -1,15 +0,0 @@
/*
* Architecture specific mm hooks
*
* Copyright (C) 2015, IBM Corporation
* Author: Laurent Dufour <ldufour@linux.vnet.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_ARM_MM_ARCH_HOOKS_H
#define _ASM_ARM_MM_ARCH_HOOKS_H
#endif /* _ASM_ARM_MM_ARCH_HOOKS_H */

View File

@ -818,12 +818,13 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu)
if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL))
break;
of_node_put(dn);
if (cpu >= nr_cpu_ids) {
pr_warn("Failed to find logical CPU for %s\n",
dn->name);
of_node_put(dn);
break;
}
of_node_put(dn);
irqs[i] = cpu;
cpumask_set_cpu(cpu, &pmu->supported_cpus);

View File

@ -50,7 +50,7 @@ static void __soft_restart(void *addr)
flush_cache_all();
/* Switch to the identity mapping. */
phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset);
phys_reset((unsigned long)addr);
/* Should never get here. */

View File

@ -291,8 +291,6 @@ void __init imx_gpc_check_dt(void)
}
}
#ifdef CONFIG_PM_GENERIC_DOMAINS
static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
{
int iso, iso2sw;
@ -399,7 +397,6 @@ static struct genpd_onecell_data imx_gpc_onecell_data = {
static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
{
struct clk *clk;
bool is_off;
int i;
imx6q_pu_domain.reg = pu_reg;
@ -416,18 +413,13 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
}
imx6q_pu_domain.num_clks = i;
is_off = IS_ENABLED(CONFIG_PM);
if (is_off) {
_imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
} else {
/*
* Enable power if compiled without CONFIG_PM in case the
* bootloader disabled it.
*/
imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
}
/* Enable power always in case bootloader disabled it. */
imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
return 0;
pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
return of_genpd_add_provider_onecell(dev->of_node,
&imx_gpc_onecell_data);
@ -437,13 +429,6 @@ clk_err:
return -EINVAL;
}
#else
static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
{
return 0;
}
#endif /* CONFIG_PM_GENERIC_DOMAINS */
static int imx_gpc_probe(struct platform_device *pdev)
{
struct regulator *pu_reg;

View File

@ -60,6 +60,7 @@ config SOC_AM43XX
select ARM_GIC
select MACH_OMAP_GENERIC
select MIGHT_HAVE_CACHE_L2X0
select HAVE_ARM_SCU
config SOC_DRA7XX
bool "TI DRA7XX"

View File

@ -24,6 +24,7 @@
#include <linux/ata_platform.h>
#include <linux/serial_8250.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -144,6 +145,8 @@ static void __init capc7117_init(void)
capc7117_uarts_init();
capc7117_ide_init();
regulator_has_full_constraints();
}
MACHINE_START(CAPC7117,

View File

@ -13,6 +13,7 @@
#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/dm9000.h>
#include <linux/leds.h>
@ -466,6 +467,8 @@ static void __init cmx2xx_init(void)
cmx2xx_init_ac97();
cmx2xx_init_touchscreen();
cmx2xx_init_leds();
regulator_has_full_constraints();
}
static void __init cmx2xx_init_irq(void)

View File

@ -835,6 +835,8 @@ static void __init cm_x300_init(void)
cm_x300_init_ac97();
cm_x300_init_wi2wi();
cm_x300_init_bl();
regulator_has_full_constraints();
}
static void __init cm_x300_fixup(struct tag *tags, char **cmdline)

View File

@ -18,6 +18,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/ucb1400.h>
#include <asm/mach/arch.h>
@ -294,6 +295,8 @@ static void __init colibri_pxa270_init(void)
printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
colibri_pxa270_baseboard);
}
regulator_has_full_constraints();
}
/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either

View File

@ -1306,6 +1306,8 @@ static void __init em_x270_init(void)
em_x270_init_i2c();
em_x270_init_camera();
em_x270_userspace_consumers_init();
regulator_has_full_constraints();
}
MACHINE_START(EM_X270, "Compulab EM-X270")

View File

@ -26,6 +26,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/can/platform/mcp251x.h>
#include <linux/regulator/machine.h>
#include "generic.h"
@ -185,6 +186,8 @@ static void __init icontrol_init(void)
mxm_8x10_mmc_init();
icontrol_can_init();
regulator_has_full_constraints();
}
MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")

View File

@ -26,6 +26,7 @@
#include <linux/dm9000.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/types.h>
@ -534,6 +535,8 @@ static void __init trizeps4_init(void)
BCR_writew(trizeps_conxs_bcr);
board_backlight_power(1);
regulator_has_full_constraints();
}
static void __init trizeps4_map_io(void)

View File

@ -24,6 +24,7 @@
#include <linux/dm9000.h>
#include <linux/ucb1400.h>
#include <linux/ata_platform.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max1586.h>
#include <linux/i2c/pxa-i2c.h>
@ -711,6 +712,8 @@ static void __init vpac270_init(void)
vpac270_ts_init();
vpac270_rtc_init();
vpac270_ide_init();
regulator_has_full_constraints();
}
MACHINE_START(VPAC270, "Voipac PXA270")

View File

@ -868,6 +868,8 @@ static void __init zeus_init(void)
i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
regulator_has_full_constraints();
}
static struct map_desc zeus_io_desc[] __initdata = {

View File

@ -3,7 +3,7 @@
*
* Copyright (C) 2009-2012 ST Microelectronics
* Rajeev Kumar <rajeev-dlh.kumar@st.com>
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -3,7 +3,7 @@
*
* Copyright (C) 2009-2012 ST Microelectronics
* Rajeev Kumar <rajeev-dlh.kumar@st.com>
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* Miscellaneous registers definitions for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -3,7 +3,7 @@
*
* Copyright (C) 2009,2012 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* SPEAr platform specific restart functions
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* SPEAr1310 machine source file
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* SPEAr1340 machine source file
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* SPEAr13XX machines common source file
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* SPEAr300 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* SPEAr310 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* SPEAr320 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -4,7 +4,7 @@
* SPEAr3XX machines common source file
*
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
* Viresh Kumar <vireshk@kernel.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

View File

@ -1971,7 +1971,7 @@ static int extend_iommu_mapping(struct dma_iommu_mapping *mapping)
{
int next_bitmap;
if (mapping->nr_bitmaps > mapping->extensions)
if (mapping->nr_bitmaps >= mapping->extensions)
return -EINVAL;
next_bitmap = mapping->nr_bitmaps;

View File

@ -274,7 +274,10 @@ __v7_ca15mp_setup:
__v7_b15mp_setup:
__v7_ca17mp_setup:
mov r10, #0
1:
1: adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6
bl v7_invalidate_l1
ldmia r12, {r0-r5, lr}
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
ALT_UP(mov r0, #(1 << 6)) @ fake it for UP
@ -283,7 +286,7 @@ __v7_ca17mp_setup:
orreq r0, r0, r10 @ Enable CPU-specific SMP bits
mcreq p15, 0, r0, c1, c0, 1
#endif
b __v7_setup
b __v7_setup_cont
/*
* Errata:
@ -413,10 +416,11 @@ __v7_pj4b_setup:
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6
bl v7_invalidate_l1
ldmia r12, {r0-r5, r7, r9, r11, lr}
ldmia r12, {r0-r5, lr}
__v7_setup_cont:
and r0, r9, #0xff000000 @ ARM?
teq r0, #0x41000000
bne __errata_finish
@ -480,7 +484,7 @@ ENDPROC(__v7_setup)
.align 2
__v7_setup_stack:
.space 4 * 11 @ 11 registers
.space 4 * 7 @ 12 registers
__INITDATA

View File

@ -25,6 +25,7 @@ generic-y += kvm_para.h
generic-y += local.h
generic-y += local64.h
generic-y += mcs_spinlock.h
generic-y += mm-arch-hooks.h
generic-y += mman.h
generic-y += msgbuf.h
generic-y += msi.h

Some files were not shown because too many files have changed in this diff Show More