Merge branch 'linus' into x86/memtest

This commit is contained in:
Ingo Molnar 2008-06-16 11:19:53 +02:00
commit 064a32d82c
1984 changed files with 41887 additions and 20335 deletions

2
.gitignore vendored
View File

@ -52,8 +52,8 @@ series
# cscope files
cscope.*
ncscope.*
*.orig
*.rej
*~
\#*#

View File

@ -14,6 +14,10 @@ MAJOR:MINOR
non-block filesystems which provide their own BDI, such as NFS
and FUSE.
MAJOR:MINOR-fuseblk
Value of st_dev on fuseblk filesystems.
default
The default backing dev, used for non-block device backed

View File

@ -703,6 +703,31 @@
</sect1>
</chapter>
<chapter id="trylock-functions">
<title>The trylock Functions</title>
<para>
There are functions that try to acquire a lock only once and immediately
return a value telling about success or failure to acquire the lock.
They can be used if you need no access to the data protected with the lock
when some other thread is holding the lock. You should acquire the lock
later if you then need access to the data protected with the lock.
</para>
<para>
<function>spin_trylock()</function> does not spin but returns non-zero if
it acquires the spinlock on the first try or 0 if not. This function can
be used in all contexts like <function>spin_lock</function>: you must have
disabled the contexts that might interrupt you and acquire the spin lock.
</para>
<para>
<function>mutex_trylock()</function> does not suspend your task
but returns non-zero if it could lock the mutex on the first try
or 0 if not. This function cannot be safely used in hardware or software
interrupt contexts despite not sleeping.
</para>
</chapter>
<chapter id="Examples">
<title>Common Examples</title>
<para>

View File

@ -327,6 +327,52 @@ Some people also put extra tags at the end. They'll just be ignored for
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
If you are a subsystem or branch maintainer, sometimes you need to slightly
modify patches you receive in order to merge them, because the code is not
exactly the same in your tree and the submitters'. If you stick strictly to
rule (c), you should ask the submitter to rediff, but this is a totally
counter-productive waste of time and energy. Rule (b) allows you to adjust
the code, but then it is very impolite to change one submitter's code and
make him endorse your bugs. To solve this problem, it is recommended that
you add a line between the last Signed-off-by header and yours, indicating
the nature of your changes. While there is nothing mandatory about this, it
seems like prepending the description with your mail and/or name, all
enclosed in square brackets, is noticeable enough to make it obvious that
you are responsible for last-minute changes. Example :
Signed-off-by: Random J Developer <random@developer.example.org>
[lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
This practise is particularly helpful if you maintain a stable branch and
want at the same time to credit the author, track changes, merge the fix,
and protect the submitter from complaints. Note that under no circumstances
can you change the author's identity (the From header), as it is the one
which appears in the changelog.
Special note to back-porters: It seems to be a common and useful practise
to insert an indication of the origin of a patch at the top of the commit
message (just after the subject line) to facilitate tracking. For instance,
here's what we see in 2.6-stable :
Date: Tue May 13 19:10:30 2008 +0000
SCSI: libiscsi regression in 2.6.25: fix nop timer handling
commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
And here's what appears in 2.4 :
Date: Tue May 13 22:12:27 2008 +0200
wireless, airo: waitbusy() won't delay
[backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
Whatever the format, this information provides a valuable help to people
tracking your trees, and to people trying to trouble-shoot bugs in your
tree.
13) When to use Acked-by: and Cc:

View File

@ -21,6 +21,11 @@ This driver is known to work with the following cards:
* SA E200
* SA E200i
* SA E500
* SA P212
* SA P410
* SA P410i
* SA P411
* SA P812
Detecting drive failures:
-------------------------

View File

@ -310,8 +310,8 @@ and then start a subshell 'sh' in that cgroup:
cd /dev/cgroup
mkdir Charlie
cd Charlie
/bin/echo 2-3 > cpus
/bin/echo 1 > mems
/bin/echo 2-3 > cpuset.cpus
/bin/echo 1 > cpuset.mems
/bin/echo $$ > tasks
sh
# The subshell 'sh' is now running in cgroup Charlie

View File

@ -129,14 +129,6 @@ to its default value of '80' it means that between the checking
intervals the CPU needs to be on average more than 80% in use to then
decide that the CPU frequency needs to be increased.
sampling_down_factor: this parameter controls the rate that the CPU
makes a decision on when to decrease the frequency. When set to its
default value of '5' it means that at 1/5 the sampling_rate the kernel
makes a decision to lower the frequency. Five "lower rate" decisions
have to be made in a row before the CPU frequency is actually lower.
If set to '1' then the frequency decreases as quickly as it increases,
if set to '2' it decreases at half the rate of the increase.
ignore_nice_load: this parameter takes a value of '0' or '1'. When
set to '0' (its default), all processes are counted towards the
'cpu utilisation' value. When set to '1', the processes that are

View File

@ -199,7 +199,7 @@ using the sched_setaffinity, mbind and set_mempolicy system calls.
The following rules apply to each cpuset:
- Its CPUs and Memory Nodes must be a subset of its parents.
- It can only be marked exclusive if its parent is.
- It can't be marked exclusive unless its parent is.
- If its cpu or memory is exclusive, they may not overlap any sibling.
These rules, and the natural hierarchy of cpusets, enable efficient
@ -345,7 +345,7 @@ is modified to perform an inline check for this PF_SPREAD_PAGE task
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
Similarly, setting 'memory_spread_cache' turns on the flag
Similarly, setting 'memory_spread_slab' turns on the flag
PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
@ -709,7 +709,10 @@ Now you want to do something with this cpuset.
In this directory you can find several files:
# ls
cpus cpu_exclusive mems mem_exclusive mem_hardwall tasks
cpu_exclusive memory_migrate mems tasks
cpus memory_pressure notify_on_release
mem_exclusive memory_spread_page sched_load_balance
mem_hardwall memory_spread_slab sched_relax_domain_level
Reading them will give you information about the state of this cpuset:
the CPUs and Memory Nodes it can use, the processes that are using

View File

@ -289,6 +289,14 @@ Who: Glauber Costa <gcosta@redhat.com>
---------------------------
What: old style serial driver for ColdFire (CONFIG_SERIAL_COLDFIRE)
When: 2.6.28
Why: This driver still uses the old interface and has been replaced
by CONFIG_SERIAL_MCF.
Who: Sebastian Siewior <sebastian@breakpoint.cc>
---------------------------
What: /sys/o2cb symlink
When: January 2010
Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb

View File

@ -139,8 +139,16 @@ commit=nrsec (*) Ext4 can be told to sync all its data and metadata
Setting it to very large values will improve
performance.
barrier=1 This enables/disables barriers. barrier=0 disables
it, barrier=1 enables it.
barrier=<0|1(*)> This enables/disables the use of write barriers in
the jbd code. barrier=0 disables, barrier=1 enables.
This also requires an IO stack which can support
barriers, and if jbd gets an error on a barrier
write, it will disable again with a warning.
Write barriers enforce proper on-disk ordering
of journal commits, making volatile disk write caches
safe to use, at some performance penalty. If
your disks are battery-backed in one way or another,
disabling barriers may safely improve performance.
orlov (*) This enables the new Orlov block allocator. It is
enabled by default.

View File

@ -36,6 +36,7 @@ files, each with their own function.
local_cpus nearby CPU mask (cpumask, ro)
resource PCI resource host addresses (ascii, ro)
resource0..N PCI resource N, if present (binary, mmap)
resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap)
rom PCI ROM resource, if present (binary, ro)
subsystem_device PCI subsystem device (ascii, ro)
subsystem_vendor PCI subsystem vendor (ascii, ro)

View File

@ -69,7 +69,8 @@ point2: Set the pwm speed at a higher temperature bound.
The ADT7473 will scale the pwm between the lower and higher pwm speed when
the temperature is between the two temperature boundaries. PWM values range
from 0 (off) to 255 (full speed).
from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the
temperature sensor associated with the PWM control exceeds temp#_max.
Notes
-----

View File

@ -0,0 +1,37 @@
Kernel driver ibmaem
======================
Supported systems:
* Any recent IBM System X server with Active Energy Manager support.
This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
driver ("ipmi-si") needs to be loaded for this driver to do anything.
Prefix: 'ibmaem'
Datasheet: Not available
Author: Darrick J. Wong
Description
-----------
This driver implements sensor reading support for the energy and power
meters available on various IBM System X hardware through the BMC. All
sensor banks will be exported as platform devices; this driver can talk
to both v1 and v2 interfaces. This driver is completely separate from the
older ibmpex driver.
The v1 AEM interface has a simple set of features to monitor energy use.
There is a register that displays an estimate of raw energy consumption
since the last BMC reset, and a power sensor that returns average power
use over a configurable interval.
The v2 AEM interface is a bit more sophisticated, being able to present
a wider range of energy and power use registers, the power cap as
set by the AEM software, and temperature sensors.
Special Features
----------------
The "power_cap" value displays the current system power cap, as set by
the Active Energy Manager software. Setting the power cap from the host
is not currently supported.

View File

@ -1,6 +1,105 @@
kernel-doc nano-HOWTO
=====================
How to format kernel-doc comments
---------------------------------
In order to provide embedded, 'C' friendly, easy to maintain,
but consistent and extractable documentation of the functions and
data structures in the Linux kernel, the Linux kernel has adopted
a consistent style for documenting functions and their parameters,
and structures and their members.
The format for this documentation is called the kernel-doc format.
It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file.
This style embeds the documentation within the source files, using
a few simple conventions. The scripts/kernel-doc perl script, some
SGML templates in Documentation/DocBook, and other tools understand
these conventions, and are used to extract this embedded documentation
into various documents.
In order to provide good documentation of kernel functions and data
structures, please use the following conventions to format your
kernel-doc comments in Linux kernel source.
We definitely need kernel-doc formatted documentation for functions
that are exported to loadable modules using EXPORT_SYMBOL.
We also look to provide kernel-doc formatted documentation for
functions externally visible to other kernel files (not marked
"static").
We also recommend providing kernel-doc formatted documentation
for private (file "static") routines, for consistency of kernel
source code layout. But this is lower priority and at the
discretion of the MAINTAINER of that kernel source file.
Data structures visible in kernel include files should also be
documented using kernel-doc formatted comments.
The opening comment mark "/**" is reserved for kernel-doc comments.
Only comments so marked will be considered by the kernel-doc scripts,
and any comment so marked must be in kernel-doc format. Do not use
"/**" to be begin a comment block unless the comment block contains
kernel-doc formatted comments. The closing comment marker for
kernel-doc comments can be either "*/" or "**/".
Kernel-doc comments should be placed just before the function
or data structure being described.
Example kernel-doc function comment:
/**
* foobar() - short function description of foobar
* @arg1: Describe the first argument to foobar.
* @arg2: Describe the second argument to foobar.
* One can provide multiple line descriptions
* for arguments.
*
* A longer description, with more discussion of the function foobar()
* that might be useful to those using or modifying it. Begins with
* empty comment line, and may include additional embedded empty
* comment lines.
*
* The longer description can have multiple paragraphs.
**/
The first line, with the short description, must be on a single line.
The @argument descriptions must begin on the very next line following
this opening short function description line, with no intervening
empty comment lines.
Example kernel-doc data structure comment.
/**
* struct blah - the basic blah structure
* @mem1: describe the first member of struct blah
* @mem2: describe the second member of struct blah,
* perhaps with more lines and words.
*
* Longer description of this structure.
**/
The kernel-doc function comments describe each parameter to the
function, in order, with the @name lines.
The kernel-doc data structure comments describe each structure member
in the data structure, with the @name lines.
The longer description formatting is "reflowed", losing your line
breaks. So presenting carefully formatted lists within these
descriptions won't work so well; derived documentation will lose
the formatting.
See the section below "How to add extractable documentation to your
source files" for more details and notes on how to format kernel-doc
comments.
Components of the kernel-doc system
-----------------------------------
Many places in the source tree have extractable documentation in the
form of block comments above functions. The components of this system
are:

View File

@ -715,14 +715,14 @@
* Name: "Gary's Encyclopedia - The Linux Kernel"
Author: Gary (I suppose...).
URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm
Keywords: links, not found here?.
URL: http://slencyclopedia.berlios.de/index.html
Keywords: linux, community, everything!
Description: Gary's Encyclopedia exists to allow the rapid finding
of documentation and other information of interest to GNU/Linux
users. It has about 4000 links to external pages in 150 major
categories. This link is for kernel-specific links, documents,
sites... Look there if you could not find here what you were
looking for.
sites... This list is now hosted by developer.Berlios.de,
but seems not to have been updated since sometime in 1999.
* Name: "The home page of Linux-MM"
Author: The Linux-MM team.

View File

@ -398,9 +398,6 @@ and is between 256 and 4096 characters. It is defined in the file
cio_ignore= [S390]
See Documentation/s390/CommonIO for details.
cio_msg= [S390]
See Documentation/s390/CommonIO for details.
clock= [BUGS=X86-32, HW] gettimeofday clocksource override.
[Deprecated]
Forces specified clocksource (if available) to be used
@ -689,6 +686,12 @@ and is between 256 and 4096 characters. It is defined in the file
floppy= [HW]
See Documentation/floppy.txt.
force_pal_cache_flush
[IA-64] Avoid check_sal_cache_flush which may hang on
buggy SAL_CACHE_FLUSH implementations. Using this
parameter will force ia64_sal_cache_flush to call
ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
gamecon.map[2|3]=
[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
support via parallel port (up to 5 devices per port)

View File

@ -305,7 +305,7 @@ should not be manipulated by any other user.
A kset keeps its children in a standard kernel linked list. Kobjects point
back to their containing kset via their kset field. In almost all cases,
the kobjects belonging to a ket have that kset (or, strictly, its embedded
the kobjects belonging to a kset have that kset (or, strictly, its embedded
kobject) in their parent.
As a kset contains a kobject within it, it should always be dynamically

View File

@ -503,7 +503,7 @@ generate input device EV_KEY events.
In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
events for switches:
SW_RADIO T60 and later hardare rfkill rocker switch
SW_RFKILL_ALL T60 and later hardare rfkill rocker switch
SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
Non hot-key ACPI HKEY event map:

View File

@ -157,6 +157,9 @@ struct virtqueue
/* The routine to call when the Guest pings us. */
void (*handle_output)(int fd, struct virtqueue *me);
/* Outstanding buffers */
unsigned int inflight;
};
/* Remember the arguments to the program so we can "reboot" */
@ -702,6 +705,7 @@ static unsigned get_vq_desc(struct virtqueue *vq,
errx(1, "Looped descriptor");
} while ((i = next_desc(vq, i)) != vq->vring.num);
vq->inflight++;
return head;
}
@ -719,6 +723,7 @@ static void add_used(struct virtqueue *vq, unsigned int head, int len)
/* Make sure buffer is written before we update index. */
wmb();
vq->vring.used->idx++;
vq->inflight--;
}
/* This actually sends the interrupt for this virtqueue */
@ -726,8 +731,9 @@ static void trigger_irq(int fd, struct virtqueue *vq)
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
/* If they don't want an interrupt, don't send one. */
if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
/* If they don't want an interrupt, don't send one, unless empty. */
if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
&& vq->inflight)
return;
/* Send the Guest an interrupt tell them we used something up. */
@ -1107,6 +1113,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
vq->inflight = 0;
/* Initialize the configuration. */
vq->config.num = num_descs;
@ -1368,6 +1375,7 @@ static void setup_tun_net(const char *arg)
/* Tell Guest what MAC address to use. */
add_feature(dev, VIRTIO_NET_F_MAC);
add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
set_config(dev, sizeof(conf), &conf);
/* We don't need the socket any more; setup is done. */

View File

@ -994,7 +994,17 @@ The Linux kernel has eight basic CPU memory barriers:
DATA DEPENDENCY read_barrier_depends() smp_read_barrier_depends()
All CPU memory barriers unconditionally imply compiler barriers.
All memory barriers except the data dependency barriers imply a compiler
barrier. Data dependencies do not impose any additional compiler ordering.
Aside: In the case of data dependencies, the compiler would be expected to
issue the loads in the correct order (eg. `a[b]` would have to load the value
of b before loading a[b]), however there is no guarantee in the C specification
that the compiler may not speculate the value of b (eg. is equal to 1) and load
a before b (eg. tmp = a[1]; if (b != 1) tmp = a[b]; ). There is also the
problem of a compiler reloading b after having loaded a[b], thus having a newer
copy of b than a[b]. A consensus has not yet been reached about these problems,
however the ACCESS_ONCE macro is a good place to start looking.
SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
systems because it is assumed that a CPU will appear to be self-consistent,

View File

@ -46,7 +46,7 @@ These are the ARCnet drivers for Linux.
This new release (2.91) has been put together by David Woodhouse
<dwmw2@cam.ac.uk>, in an attempt to tidy up the driver after adding support
<dwmw2@infradead.org>, in an attempt to tidy up the driver after adding support
for yet another chipset. Now the generic support has been separated from the
individual chipset drivers, and the source files aren't quite so packed with
#ifdefs! I've changed this file a bit, but kept it in the first person from

View File

@ -1,6 +1,6 @@
In order to use the Ethernet bridging functionality, you'll need the
userspace tools. These programs and documentation are available
at http://bridge.sourceforge.net. The download page is
at http://www.linux-foundation.org/en/Net:Bridge. The download page is
http://prdownloads.sourceforge.net/bridge.
If you still have questions, don't hesitate to post to the mailing list

View File

@ -5,6 +5,6 @@
4 -> DViCO FusionHDTV5 Express [18ac:d500]
5 -> Hauppauge WinTV-HVR1500Q [0070:7790,0070:7797]
6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717]
7 -> Hauppauge WinTV-HVR1200 [0070:71d1]
7 -> Hauppauge WinTV-HVR1200 [0070:71d1,0070:71d3]
8 -> Hauppauge WinTV-HVR1700 [0070:8101]
9 -> Hauppauge WinTV-HVR1400 [0070:8010]

View File

@ -60,7 +60,7 @@
59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530]
60 -> Pinnacle Hybrid PCTV [12ab:1788]
61 -> Winfast TV2000 XP Global [107d:6f18]
62 -> PowerColor Real Angel 330 [14f1:ea3d]
62 -> PowerColor RA330 [14f1:ea3d]
63 -> Geniatech X8000-MT DVBT [14f1:8852]
64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30]
65 -> DViCO FusionHDTV 7 Gold [18ac:d610]

View File

@ -14,4 +14,4 @@
13 -> Terratec Prodigy XS (em2880) [0ccd:0047]
14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
15 -> V-Gear PocketTV (em2800)
16 -> Hauppauge WinTV HVR 950 (em2880) [2040:6513]
16 -> Hauppauge WinTV HVR 950 (em2880) [2040:6513,2040:6517,2040:651b,2040:651f]

View File

@ -1,7 +1,9 @@
Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
encoder chip:
1) The only hardware currently supported is the Hauppauge HVR-1600.
1) The only hardware currently supported is the Hauppauge HVR-1600
card and the Compro VideoMate H900 (note that this card only
supports analog input, it has no digital tuner!).
2) Some people have problems getting the i2c bus to work. Cause unknown.
The symptom is that the eeprom cannot be read and the card is

View File

@ -0,0 +1,77 @@
pagemap, from the userspace perspective
---------------------------------------
pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow
userspace programs to examine the page tables and related information by
reading files in /proc.
There are three components to pagemap:
* /proc/pid/pagemap. This file lets a userspace process find out which
physical frame each virtual page is mapped to. It contains one 64-bit
value for each virtual page, containing the following data (from
fs/proc/task_mmu.c, above pagemap_read):
* Bits 0-55 page frame number (PFN) if present
* Bits 0-4 swap type if swapped
* Bits 5-55 swap offset if swapped
* Bits 55-60 page shift (page size = 1<<page shift)
* Bit 61 reserved for future use
* Bit 62 page swapped
* Bit 63 page present
If the page is not present but in swap, then the PFN contains an
encoding of the swap file number and the page's offset into the
swap. Unmapped pages return a null PFN. This allows determining
precisely which pages are mapped (or in swap) and comparing mapped
pages between processes.
Efficient users of this interface will use /proc/pid/maps to
determine which areas of memory are actually mapped and llseek to
skip over unmapped regions.
* /proc/kpagecount. This file contains a 64-bit count of the number of
times each page is mapped, indexed by PFN.
* /proc/kpageflags. This file contains a 64-bit set of flags for each
page, indexed by PFN.
The flags are (from fs/proc/proc_misc, above kpageflags_read):
0. LOCKED
1. ERROR
2. REFERENCED
3. UPTODATE
4. DIRTY
5. LRU
6. ACTIVE
7. SLAB
8. WRITEBACK
9. RECLAIM
10. BUDDY
Using pagemap to do something useful:
The general procedure for using pagemap to find out about a process' memory
usage goes like this:
1. Read /proc/pid/maps to determine which parts of the memory space are
mapped to what.
2. Select the maps you are interested in -- all of them, or a particular
library, or the stack or the heap, etc.
3. Open /proc/pid/pagemap and seek to the pages you would like to examine.
4. Read a u64 for each page from pagemap.
5. Open /proc/kpagecount and/or /proc/kpageflags. For each PFN you just
read, seek to that entry in the file, and read the data you want.
For example, to find the "unique set size" (USS), which is the amount of
memory that a process is using that is not shared with any other process,
you can go through every map in the process, find the PFNs, look those up
in kpagecount, and tally up the number of pages that are only referenced
once.
Other notes:
Reading from any of the files will return -EINVAL if you are not starting
the read on an 8-byte boundary (e.g., if you seeked an odd number of bytes
into the file), or if the size of the read is not a multiple of 8 bytes.

3
Kbuild
View File

@ -96,5 +96,4 @@ missing-syscalls: scripts/checksyscalls.sh FORCE
$(call cmd,syscalls)
# Delete all targets during make clean
clean-files := $(addprefix $(objtree)/,$(targets))
clean-files := $(addprefix $(objtree)/,$(filter-out $(bounds-file) $(offsets-file),$(targets)))

View File

@ -228,21 +228,21 @@ ACPI BATTERY DRIVERS
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI EC DRIVER
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI FAN DRIVER
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI PCI HOTPLUG DRIVER
@ -255,14 +255,14 @@ ACPI THERMAL DRIVER
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI VIDEO DRIVER
P: Rui Zhang
M: rui.zhang@intel.com
L: linux-acpi@vger.kernel.org
W: http://acpi.sourceforge.net/
W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI WMI DRIVER
@ -274,7 +274,7 @@ S: Maintained
AD1889 ALSA SOUND DRIVER
P: Kyle McMartin
M: kyle@parisc-linux.org
M: kyle@mcmartin.ca
P: Thibaut Varene
M: T-Bone@parisc-linux.org
W: http://wiki.parisc-linux.org/AD1889
@ -367,12 +367,12 @@ S: Maintained for 2.4; PCI support for 2.6.
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
M: thomas.dahlmann@amd.com
L: info-linux@geode.amd.com (subscribers-only)
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
AMD GEODE PROCESSOR/CHIPSET SUPPORT
P: Jordan Crouse
L: info-linux@geode.amd.com (subscribers-only)
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
S: Supported
@ -982,13 +982,6 @@ L: bonding-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/bonding/
S: Supported
BROADBAND PROCESSOR ARCHITECTURE
P: Arnd Bergmann
M: arnd@arndb.de
L: linuxppc-dev@ozlabs.org
W: http://www.penguinppc.org/ppc64/
S: Supported
BROADCOM B44 10/100 ETHERNET DRIVER
P: Gary Zambrano
M: zambrano@broadcom.com
@ -1002,8 +995,8 @@ L: netdev@vger.kernel.org
S: Supported
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
P: Eliezer Tamir
M: eliezert@broadcom.com
P: Eilon Greenstein
M: eilong@broadcom.com
L: netdev@vger.kernel.org
S: Supported
@ -1052,6 +1045,14 @@ L: linux-kernel@vger.kernel.org
L: discuss@x86-64.org
S: Maintained
CELL BROADBAND ENGINE ARCHITECTURE
P: Arnd Bergmann
M: arnd@arndb.de
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
S: Supported
CFAG12864B LCD DRIVER
P: Miguel Ojeda Sandonis
M: maxextreme@gmail.com
@ -1201,6 +1202,7 @@ M: pj@sgi.com
M: menage@google.com
L: linux-kernel@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
S: Supported
CRAMFS FILESYSTEM
@ -1230,6 +1232,29 @@ P: Jaya Kumar
M: jayakumar.alsa@gmail.com
S: Maintained
CX18 VIDEO4LINUX DRIVER
P: Hans Verkuil, Andy Walls
M: hverkuil@xs4all.nl, awalls@radix.net
L: ivtv-devel@ivtvdriver.org
L: ivtv-users@ivtvdriver.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
S: Maintained
CXGB3 ETHERNET DRIVER (CXGB3)
P: Divy Le Ray
M: divy@chelsio.com
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
P: Steve Wise
M: swise@chelsio.com
L: general@lists.openfabrics.org
W: http://www.openfabrics.org
S: Supported
CYBERPRO FB DRIVER
P: Russell King
M: rmk@arm.linux.org.uk
@ -1587,7 +1612,7 @@ ETHERNET BRIDGE
P: Stephen Hemminger
M: shemminger@linux-foundation.org
L: bridge@lists.linux-foundation.org
W: http://bridge.sourceforge.net/
W: http://www.linux-foundation.org/en/Net:Bridge
S: Maintained
ETHERTEAM 16I DRIVER
@ -1636,8 +1661,10 @@ W: http://linux-fbdev.sourceforge.net/
S: Maintained
FREESCALE DMA DRIVER
P; Zhang Wei
M: wei.zhang@freescale.com
P: Li Yang
M: leoli@freescale.com
P: Zhang Wei
M: zw@zh-kernel.org
L: linuxppc-embedded@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
@ -1801,7 +1828,7 @@ S: Maintained
HARMONY SOUND DRIVER
P: Kyle McMartin
M: kyle@parisc-linux.org
M: kyle@mcmartin.ca
L: linux-parisc@vger.kernel.org
S: Maintained
@ -1931,8 +1958,10 @@ L: lm-sensors@lm-sensors.org
S: Maintained
I2C SUBSYSTEM
P: Jean Delvare
P: Jean Delvare (PC drivers, core)
M: khali@linux-fr.org
P: Ben Dooks (embedded platforms)
M: ben-linux@fluff.org
L: i2c@lm-sensors.org
T: quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
S: Maintained
@ -2318,7 +2347,8 @@ S: Maintained
KERNEL BUILD (kbuild: Makefile, scripts/Makefile.*)
P: Sam Ravnborg
M: sam@ravnborg.org
T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-next.git
T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
L: linux-kbuild@vger.kernel.org
S: Maintained
@ -2340,24 +2370,24 @@ S: Supported
KERNEL VIRTUAL MACHINE (KVM)
P: Avi Kivity
M: avi@qumranet.com
L: kvm-devel@lists.sourceforge.net
W: kvm.sourceforge.net
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
P: Hollis Blanchard
M: hollisb@us.ibm.com
L: kvm-ppc-devel@lists.sourceforge.net
W: kvm.sourceforge.net
L: kvm-ppc@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
KERNEL VIRTUAL MACHINE For Itanium(KVM/IA64)
KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
P: Anthony Xu
M: anthony.xu@intel.com
P: Xiantao Zhang
M: xiantao.zhang@intel.com
L: kvm-ia64-devel@lists.sourceforge.net
W: kvm.sourceforge.net
L: kvm-ia64@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
@ -2536,7 +2566,6 @@ LINUX SECURITY MODULE (LSM) FRAMEWORK
P: Chris Wright
M: chrisw@sous-sol.org
L: linux-security-module@vger.kernel.org
W: http://lsm.immunix.org
T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
@ -2808,6 +2837,15 @@ M: jirislaby@gmail.com
L: linux-kernel@vger.kernel.org
S: Maintained
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
P: Andrew Gallatin
M: gallatin@myri.com
P: Brice Goglin
M: brice@myri.com
L: netdev@vger.kernel.org
W: http://www.myri.com/scs/download-Myri10GE.html
S: Supported
NATSEMI ETHERNET DRIVER (DP8381x)
P: Tim Hockin
M: thockin@hockin.org
@ -2828,8 +2866,8 @@ S: Maintained
NETEFFECT IWARP RNIC DRIVER (IW_NES)
P: Faisal Latif
M: flatif@neteffect.com
P: Nishi Gupta
M: ngupta@neteffect.com
P: Chien Tung
M: ctung@neteffect.com
P: Glenn Streiff
M: gstreiff@neteffect.com
L: general@lists.openfabrics.org
@ -3083,7 +3121,7 @@ S: Maintained
PARISC ARCHITECTURE
P: Kyle McMartin
M: kyle@parisc-linux.org
M: kyle@mcmartin.ca
P: Matthew Wilcox
M: matthew@wil.cx
P: Grant Grundler
@ -3121,7 +3159,7 @@ PCI ERROR RECOVERY
P: Linas Vepstas
M: linas@austin.ibm.com
L: linux-kernel@vger.kernel.org
L: linux-pci@atrey.karlin.mff.cuni.cz
L: linux-pci@vger.kernel.org
S: Supported
PCI SUBSYSTEM
@ -3227,7 +3265,7 @@ S: Maintained
PPP OVER ETHERNET
P: Michal Ostrowski
M: mostrows@speakeasy.net
M: mostrows@earthlink.net
S: Maintained
PPP OVER L2TP
@ -3292,9 +3330,11 @@ L: video4linux-list@redhat.com
W: http://www.isely.net/pvrusb2/
S: Maintained
PXA2xx SUPPORT
P: Nicolas Pitre
M: nico@cam.org
PXA2xx/PXA3xx SUPPORT
P: Eric Miao
M: eric.miao@marvell.com
P: Russell King
M: linux@arm.linux.org.uk
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
@ -3401,10 +3441,7 @@ L: rtc-linux@googlegroups.com
S: Maintained
REISERFS FILE SYSTEM
P: Hans Reiser
M: reiserfs-dev@namesys.com
L: reiserfs-devel@vger.kernel.org
W: http://www.namesys.com
S: Supported
RFKILL
@ -3624,13 +3661,6 @@ M: romieu@fr.zoreil.com
L: netdev@vger.kernel.org
S: Maintained
SIS 5513 IDE CONTROLLER DRIVER
P: Lionel Bouton
M: Lionel.Bouton@inet6.fr
W: http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
W: http://gyver.homeip.net/sis5513/index.html
S: Maintained
SIS 900/7016 FAST ETHERNET DRIVER
P: Daniele Venzano
M: venza@brownhat.org
@ -3755,6 +3785,14 @@ M: dbrownell@users.sourceforge.net
L: spi-devel-general@lists.sourceforge.net
S: Maintained
SPU FILE SYSTEM
P: Jeremy Kerr
M: jk@ozlabs.org
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
S: Supported
STABLE BRANCH:
P: Greg Kroah-Hartman
M: greg@kroah.com
@ -3988,7 +4026,7 @@ TULIP NETWORK DRIVERS
P: Grant Grundler
M: grundler@parisc-linux.org
P: Kyle McMartin
M: kyle@parisc-linux.org
M: kyle@mcmartin.ca
L: netdev@vger.kernel.org
S: Maintained
@ -4010,12 +4048,41 @@ M: ballabio_dario@emc.com
L: linux-scsi@vger.kernel.org
S: Maintained
UCLINUX (AND M68KNOMMU)
P: Greg Ungerer
M: gerg@uclinux.org
W: http://www.uclinux.org/
L: uclinux-dev@uclinux.org (subscribers-only)
S: Maintained
UCLINUX FOR NEC V850
P: Miles Bader
UCLINUX FOR RENESAS H8/300
P: Yoshinori Sato
M: ysato@users.sourceforge.jp
W: http://uclinux-h8.sourceforge.jp/
S: Supported
UDF FILESYSTEM
P: Jan Kara
M: jack@suse.cz
W: http://linux-udf.sourceforge.net
S: Maintained
UFS FILESYSTEM
P: Evgeniy Dushistov
M: dushistov@mail.ru
L: linux-kernel@vger.kernel.org
S: Maintained
UltraSPARC (sparc64):
P: David S. Miller
M: davem@davemloft.net
L: sparclinux@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
S: Maintained
UNIFORM CDROM DRIVER
P: Jens Axboe
M: axboe@kernel.dk
@ -4062,6 +4129,13 @@ L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
USB DIAMOND RIO500 DRIVER
P: Cesar Miquel
M: miquel@df.uba.ar
L: rio500-users@lists.sourceforge.net
W: http://rio500.sourceforge.net
S: Maintained
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
@ -4293,6 +4367,14 @@ M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
S: Maintained
UTIL-LINUX-NG PACKAGE
P: Karel Zak
M: kzak@redhat.com
L: util-linux-ng@vger.kernel.org
W: http://kernel.org/~kzak/util-linux-ng/
T: git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
S: Maintained
VFAT/FAT/MSDOS FILESYSTEM:
P: OGAWA Hirofumi
M: hirofumi@mail.parknet.co.jp
@ -4316,42 +4398,6 @@ M: romieu@fr.zoreil.com
L: netdev@vger.kernel.org
S: Maintained
UCLINUX (AND M68KNOMMU)
P: Greg Ungerer
M: gerg@uclinux.org
W: http://www.uclinux.org/
L: uclinux-dev@uclinux.org (subscribers-only)
S: Maintained
UCLINUX FOR NEC V850
P: Miles Bader
UCLINUX FOR RENESAS H8/300
P: Yoshinori Sato
M: ysato@users.sourceforge.jp
W: http://uclinux-h8.sourceforge.jp/
S: Supported
UFS FILESYSTEM
P: Evgeniy Dushistov
M: dushistov@mail.ru
L: linux-kernel@vger.kernel.org
S: Maintained
UltraSPARC (sparc64):
P: David S. Miller
M: davem@davemloft.net
L: sparclinux@vger.kernel.org
T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
S: Maintained
USB DIAMOND RIO500 DRIVER
P: Cesar Miquel
M: miquel@df.uba.ar
L: rio500-users@lists.sourceforge.net
W: http://rio500.sourceforge.net
S: Maintained
VIDEO FOR LINUX
P: Mauro Carvalho Chehab
M: mchehab@infradead.org

View File

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 26
EXTRAVERSION = -rc2
NAME = Funky Weasel is Jiggy wit it
EXTRAVERSION = -rc6
NAME = Rotary Wombat
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@ -1114,6 +1114,7 @@ MRPROPER_DIRS += include/config include2 usr/include
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/linux/autoconf.h include/linux/version.h \
include/linux/utsrelease.h \
include/linux/bounds.h include/asm*/asm-offsets.h \
Module.symvers tags TAGS cscope*
# clean - Delete most, but leave enough to build external modules
@ -1431,7 +1432,7 @@ define xtags
elif $1 --version 2>&1 | grep -iq emacs; then \
$(all-sources) | xargs $1 -a; \
$(all-kconfigs) | xargs $1 -a \
--regex='/^[ \t]*(menu|)config[ \t]+\([a-zA-Z0-9_]+\)/\2/'; \
--regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'; \
$(all-defconfigs) | xargs -r $1 -a \
--regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \
else \

View File

@ -9,7 +9,6 @@
static struct fs_struct init_fs = INIT_FS;
static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);

View File

@ -33,10 +33,6 @@ __XScale_start:
bic r0, r0, #0x1000 @ clear Icache
mcr p15, 0, r0, c1, c0, 0
#ifdef CONFIG_ARCH_COTULLA_IDP
mov r7, #MACH_TYPE_COTULLA_IDP
#endif
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000

View File

@ -321,11 +321,42 @@ static void locomo_gpio_unmask_irq(unsigned int irq)
locomo_writel(r, mapbase + LOCOMO_GIE);
}
static int GPIO_IRQ_rising_edge;
static int GPIO_IRQ_falling_edge;
static int locomo_gpio_type(unsigned int irq, unsigned int type)
{
unsigned int mask;
void __iomem *mapbase = get_irq_chip_data(irq);
mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
if (type == IRQT_PROBE) {
if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
return 0;
type = __IRQT_RISEDGE | __IRQT_FALEDGE;
}
if (type & __IRQT_RISEDGE)
GPIO_IRQ_rising_edge |= mask;
else
GPIO_IRQ_rising_edge &= ~mask;
if (type & __IRQT_FALEDGE)
GPIO_IRQ_falling_edge |= mask;
else
GPIO_IRQ_falling_edge &= ~mask;
locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
return 0;
}
static struct irq_chip locomo_gpio_chip = {
.name = "LOCOMO-gpio",
.ack = locomo_gpio_ack_irq,
.mask = locomo_gpio_mask_irq,
.unmask = locomo_gpio_unmask_irq,
.name = "LOCOMO-gpio",
.ack = locomo_gpio_ack_irq,
.mask = locomo_gpio_mask_irq,
.unmask = locomo_gpio_unmask_irq,
.set_type = locomo_gpio_type,
};
static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
@ -450,22 +481,18 @@ static void locomo_setup_irq(struct locomo *lchip)
set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
@ -488,7 +515,7 @@ static void locomo_setup_irq(struct locomo *lchip)
set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
set_irq_chip(irq, &locomo_spi_chip);
set_irq_chip_data(irq, irqbase);
set_irq_handler(irq, handle_edge_irq);
@ -574,20 +601,20 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPO);
save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPICT); /* SPI */
save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPE);
save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
locomo_writel(0x00, lchip->base + LOCOMO_ASD);
save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPIMD); /* SPI */
locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD);
save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); /* SPI */
locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
locomo_writel(0x00, lchip->base + LOCOMO_DAC);
locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) )
if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */
else
/* 18MHz already enabled, so no wait */
@ -616,10 +643,10 @@ static int locomo_resume(struct platform_device *dev)
spin_lock_irqsave(&lchip->lock, flags);
locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT);
locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD);
locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
locomo_writel(0x00, lchip->base + LOCOMO_C32K);
locomo_writel(0x90, lchip->base + LOCOMO_TADC);
@ -688,9 +715,9 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
/* GPIO */
locomo_writel(0, lchip->base + LOCOMO_GPO);
locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
, lchip->base + LOCOMO_GPE);
locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
, lchip->base + LOCOMO_GPD);
locomo_writel(0, lchip->base + LOCOMO_GIE);
@ -833,7 +860,10 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
spin_lock_irqsave(&lchip->lock, flags);
r = locomo_readl(lchip->base + LOCOMO_GPD);
r &= ~bits;
if (dir)
r |= bits;
else
r &= ~bits;
locomo_writel(r, lchip->base + LOCOMO_GPD);
r = locomo_readl(lchip->base + LOCOMO_GPE);

View File

@ -179,3 +179,5 @@ EXPORT_SYMBOL(_find_next_zero_bit_be);
EXPORT_SYMBOL(_find_first_bit_be);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
EXPORT_SYMBOL(copy_page);

View File

@ -90,3 +90,5 @@ static void __exit arthur_exit(void)
module_init(arthur_init);
module_exit(arthur_exit);
MODULE_LICENSE("GPL");

View File

@ -13,7 +13,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);

View File

@ -544,10 +544,10 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
struct resource *fb_res = &lcdc_resources[2];
size_t fb_len = fb_res->end - fb_res->start + 1;
fb = ioremap_writecombine(fb_res->start, fb_len);
fb = ioremap(fb_res->start, fb_len);
if (fb) {
memset(fb, 0, fb_len);
iounmap(fb, fb_len);
iounmap(fb);
}
}
lcdc_data = *data;

View File

@ -332,13 +332,6 @@ static struct resource lcdc_resources[] = {
.end = AT91SAM9RL_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
#if defined(CONFIG_FB_INTSRAM)
[2] = {
.start = AT91SAM9RL_SRAM_BASE,
.end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
.flags = IORESOURCE_MEM,
},
#endif
};
static struct platform_device at91_lcdc_device = {
@ -381,20 +374,6 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
#ifdef CONFIG_FB_INTSRAM
{
void __iomem *fb;
struct resource *fb_res = &lcdc_resources[2];
size_t fb_len = fb_res->end - fb_res->start + 1;
fb = ioremap_writecombine(fb_res->start, fb_len);
if (fb) {
memset(fb, 0, fb_len);
iounmap(fb, fb_len);
}
}
#endif
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
}

View File

@ -16,16 +16,32 @@
#include <asm/mach/arch.h>
#include <asm/arch/at91x40.h>
#include <asm/arch/at91_st.h>
#include <asm/arch/timex.h>
#include "generic.h"
/*
* This is used in the gpio code, stub locally.
* Export the clock functions for the AT91X40. Some external code common
* to all AT91 family parts relys on this, like the gpio and serial support.
*/
int clk_enable(struct clk *clk)
{
return 0;
}
void clk_disable(struct clk *clk)
{
}
unsigned long clk_get_rate(struct clk *clk)
{
return AT91X40_MASTER_CLOCK;
}
struct clk *clk_get(struct device *dev, const char *id)
{
return NULL;
}
void __init at91x40_initialize(unsigned long main_clock)
{
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)

View File

@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev)
lm_set_drvdata(dev, impd1);
printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
printk("IM-PD1 found at 0x%08lx\n",
(unsigned long)dev->resource.start);
for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
impd1->vcos[i].owner = THIS_MODULE,

View File

@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
v3_readb(V3_LB_ISTAT));
printk(KERN_DEBUG "%s", buf);
printascii(buf);
#endif
v3_writeb(V3_LB_ISTAT, 0);
@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
unsigned long pc = instruction_pointer(regs);
unsigned long instr = *(unsigned long *)pc;
char buf[128];
extern void printascii(const char *);
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,

View File

@ -24,7 +24,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/tsc2102.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
@ -63,7 +62,7 @@ static const int palmte_keymap[] = {
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
KEY(1, 4, KEY_CENTER),
KEY(1, 4, KEY_ENTER),
0,
};
@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
#define palmte_get_power_status NULL
#endif
static struct tsc2102_config palmte_tsc2102_config = {
.use_internal = 0,
.monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP,
.temp_at25c = { 2200, 2615 },
.apm_report = palmte_get_power_status,
.alsa_config = &palmte_alsa_config,
};
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_MMC, &palmte_mmc_config },
@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
.platform_data = &palmte_tsc2102_config,
.max_speed_hz = 8000000,
},
};

View File

@ -65,7 +65,7 @@ static int palmz71_keymap[] = {
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
KEY(1, 4, KEY_CENTER),
KEY(1, 4, KEY_ENTER),
KEY(2, 0, KEY_CAMERA),
0,
};

View File

@ -208,6 +208,7 @@ static void __init omap_2430sdp_init(void)
static void __init omap_2430sdp_map_io(void)
{
omap2_set_globals_243x();
omap2_map_common_io();
}

View File

@ -394,6 +394,7 @@ static void __init omap_apollon_init(void)
static void __init omap_apollon_map_io(void)
{
omap2_set_globals_242x();
omap2_map_common_io();
}

View File

@ -65,6 +65,7 @@ static void __init omap_generic_init(void)
static void __init omap_generic_map_io(void)
{
omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
omap2_map_common_io();
}

View File

@ -420,6 +420,7 @@ static void __init omap_h4_init(void)
static void __init omap_h4_map_io(void)
{
omap2_set_globals_242x();
omap2_map_common_io();
}

View File

@ -205,7 +205,9 @@ static void omap2_clk_wait_ready(struct clk *clk)
/* REVISIT: What are the appropriate exclusions for 34XX? */
/* OMAP3: ignore DSS-mod clocks */
if (cpu_is_omap34xx() &&
(((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
(((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
return;
/* Check if both functional and interface clocks

View File

@ -836,7 +836,8 @@ static struct clk dpll5_m2_ck = {
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
.clksel_mask = OMAP3430ES2_DIV_120M_MASK,
.clksel = div16_dpll5_clksel,
.flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
.flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
@ -1046,12 +1047,13 @@ static struct clk iva2_ck = {
.name = "iva2_ck",
.parent = &dpll2_m2_ck,
.init = &omap2_init_clksel_parent,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
OMAP3430_CM_IDLEST_PLL),
.clksel_mask = OMAP3430_ST_IVA2_CLK_MASK,
.clksel = iva2_clksel,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.recalc = &omap2_clksel_recalc,
};
@ -1836,7 +1838,8 @@ static struct clk omapctrl_ick = {
static struct clk ssi_l4_ick = {
.name = "ssi_l4_ick",
.parent = &l4_ick,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
@ -2344,7 +2347,7 @@ static struct clk gpio6_fck = {
.name = "gpio6_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT6_SHIFT,
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@ -2353,7 +2356,7 @@ static struct clk gpio5_fck = {
.name = "gpio5_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT5_SHIFT,
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@ -2362,7 +2365,7 @@ static struct clk gpio4_fck = {
.name = "gpio4_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT4_SHIFT,
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@ -2371,7 +2374,7 @@ static struct clk gpio3_fck = {
.name = "gpio3_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT3_SHIFT,
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@ -2380,7 +2383,7 @@ static struct clk gpio2_fck = {
.name = "gpio2_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPT2_SHIFT,
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};

View File

@ -56,6 +56,7 @@
/* CM_FCLKEN_IVA2 */
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2 (1 << 0)
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
/* CM_CLKEN_PLL_IVA2 */
#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT 8

View File

@ -70,6 +70,9 @@ struct omap_mbox2_priv {
static struct clk *mbox_ick_handle;
static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq);
static inline unsigned int mbox_read_reg(unsigned int reg)
{
return __raw_readl(mbox_base + reg);
@ -81,7 +84,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg)
}
/* Mailbox H/W preparations */
static inline int omap2_mbox_startup(struct omap_mbox *mbox)
static int omap2_mbox_startup(struct omap_mbox *mbox)
{
unsigned int l;
@ -97,38 +100,40 @@ static inline int omap2_mbox_startup(struct omap_mbox *mbox)
l |= 0x00000011;
mbox_write_reg(l, MAILBOX_SYSCONFIG);
omap2_mbox_enable_irq(mbox, IRQ_RX);
return 0;
}
static inline void omap2_mbox_shutdown(struct omap_mbox *mbox)
static void omap2_mbox_shutdown(struct omap_mbox *mbox)
{
clk_disable(mbox_ick_handle);
clk_put(mbox_ick_handle);
}
/* Mailbox FIFO handle functions */
static inline mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
return (mbox_msg_t) mbox_read_reg(fifo->msg);
}
static inline void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
mbox_write_reg(msg, fifo->msg);
}
static inline int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
return (mbox_read_reg(fifo->msg_stat) == 0);
}
static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
@ -136,7 +141,7 @@ static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
}
/* Mailbox IRQ handle functions */
static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@ -147,7 +152,7 @@ static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
mbox_write_reg(l, p->irqenable);
}
static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@ -158,7 +163,7 @@ static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
mbox_write_reg(l, p->irqenable);
}
static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@ -167,7 +172,7 @@ static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
mbox_write_reg(bit, p->irqstatus);
}
static inline int omap2_mbox_is_irq(struct omap_mbox *mbox,
static int omap2_mbox_is_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;

View File

@ -30,7 +30,7 @@
/*
* Architecture-specific global PRM registers
* Use prm_{read,write}_reg() with these registers.
* Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx, and PRM_* on 34xx. (The exceptions are the

View File

@ -58,7 +58,7 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
}
static struct hw_pci dns323_pci __initdata = {
.nr_controllers = 1,
.nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,

View File

@ -138,7 +138,7 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
}
static struct hw_pci kurobox_pro_pci __initdata = {
.nr_controllers = 1,
.nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,

View File

@ -59,7 +59,7 @@ static struct resource cmx270_dm9k_resource[] = {
[2] = {
.start = CMX270_ETHIRQ,
.end = CMX270_ETHIRQ,
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};

View File

@ -98,7 +98,7 @@ static struct resource dm9000_resources[] = {
[2] = {
.start = COLIBRI_ETH_IRQ,
.end = COLIBRI_ETH_IRQ,
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
@ -119,7 +119,6 @@ static void __init colibri_init(void)
/* DM9000 LAN */
pxa_gpio_mode(GPIO78_nCS_2_MD);
pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
}

View File

@ -50,7 +50,7 @@ static struct resource em_x270_dm9k_resource[] = {
[2] = {
.start = EM_X270_ETHIRQ,
.end = EM_X270_ETHIRQ,
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};

View File

@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label)
mutex_unlock(&ssp_lock);
if (ssp->port_id != port)
if (&ssp->node == &ssp_list)
return NULL;
return ssp;

View File

@ -467,8 +467,8 @@ static struct platform_device *devices[] __initdata = {
static void tosa_poweroff(void)
{
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
gpio_set_value(TOSA_GPIO_ON_RESET, 1);
mdelay(1000);
arm_machine_restart('h');

View File

@ -374,7 +374,7 @@ static struct resource bast_dm9k_resource[] = {
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};

View File

@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = {
[2] = {
.start = IRQ_VR1000_DM9000A,
.end = IRQ_VR1000_DM9000A,
.flags = IORESOURCE_IRQ
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = {
[2] = {
.start = IRQ_VR1000_DM9000N,
.end = IRQ_VR1000_DM9000N,
.flags = IORESOURCE_IRQ
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};

View File

@ -225,26 +225,28 @@ static void __init collie_init(void)
int ret = 0;
/* cpu initialize */
GAFR = ( GPIO_SSP_TXD | \
GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
GPIO_32_768kHz );
GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
GPIO_MCP_CLK | GPIO_32_768kHz;
GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
GPLR = GPIO_GPIO18;
GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
// PPC pin setting
PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
PGSR = COLLIE_GPIO_nREMOCON_ON;
PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
PCFR = PCFR_OPDE;
GAFR |= GPIO_32_768kHz;
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_32_768kHz;
platform_scoop_config = &collie_pcmcia_config;

View File

@ -332,7 +332,7 @@ ENTRY(arm925_dma_flush_range)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1

View File

@ -295,7 +295,7 @@ ENTRY(arm926_dma_flush_range)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1

View File

@ -222,7 +222,7 @@ ENTRY(arm940_dma_flush_range)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry
#else
mcr p15, 0, r3, c7, c10, 2 @ clean D entry
mcr p15, 0, r3, c7, c6, 2 @ invalidate D entry
#endif
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0

View File

@ -265,7 +265,7 @@ ENTRY(arm946_dma_flush_range)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1

View File

@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
#include <asm/io.h>
@ -134,9 +135,17 @@ void clk_disable(struct clk *clk)
return;
spin_lock_irqsave(&clockfw_lock, flags);
BUG_ON(clk->usecount == 0);
if (clk->usecount == 0) {
printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
clk->name);
WARN_ON(1);
goto out;
}
if (arch_clock->clk_disable)
arch_clock->clk_disable(clk);
out:
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);

View File

@ -604,6 +604,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->data = data;
#ifndef CONFIG_ARCH_OMAP1
chan->chain_id = -1;
chan->next_linked_ch = -1;
#endif
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
@ -1087,7 +1088,6 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
printk(KERN_ERR "omap_dma: Request failed %d\n", err);
return err;
}
dma_chan[channels[i]].next_linked_ch = -1;
dma_chan[channels[i]].prev_linked_ch = -1;
dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;

View File

@ -355,7 +355,6 @@ static int omap_mbox_init(struct omap_mbox *mbox)
"failed to register mailbox interrupt:%d\n", ret);
goto fail_request_irq;
}
enable_mbox_irq(mbox, IRQ_RX);
mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
if (!mq) {

View File

@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
/* rename any peripherals used differing from the s3c2410 */
s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_i2c.name = "s3c2440-i2c";
s3c_device_nand.name = "s3c2440-nand";
s3c_device_usbgadget.name = "s3c2440-usbgadget";

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Wed Jan 9 23:20:41 2008
# Linux kernel version: 2.6.26-rc3
# Mon May 26 13:30:59 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@ -73,11 +73,21 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
@ -101,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@ -141,16 +156,19 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@ -164,9 +182,10 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@ -202,6 +221,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@ -255,87 +275,40 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_GRE=m
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@ -343,54 +316,25 @@ CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
@ -407,7 +351,6 @@ CONFIG_LLC=m
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@ -415,6 +358,7 @@ CONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -450,6 +394,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@ -531,11 +476,18 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ATMEL_PWM is not set
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@ -568,11 +520,13 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@ -586,6 +540,7 @@ CONFIG_MACB=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@ -599,7 +554,6 @@ CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@ -621,6 +575,7 @@ CONFIG_SLHC=m
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -633,6 +588,7 @@ CONFIG_SLHC=m
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@ -640,21 +596,13 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@ -665,27 +613,23 @@ CONFIG_I2C_GPIO=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@ -702,9 +646,27 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
# GPIO Support
#
# CONFIG_DEBUG_GPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -724,12 +686,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
@ -753,14 +725,12 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@ -772,6 +742,7 @@ CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@ -787,6 +758,7 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@ -797,11 +769,13 @@ CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@ -816,6 +790,8 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -844,19 +820,22 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -865,10 +844,6 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
@ -885,14 +860,11 @@ CONFIG_JBD=m
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@ -948,8 +920,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@ -957,12 +931,10 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@ -1030,11 +1002,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set
#
# Kernel hacking
@ -1042,6 +1009,7 @@ CONFIG_KPROBES=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@ -1052,7 +1020,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -1066,12 +1036,14 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@ -1083,52 +1055,90 @@ CONFIG_FRAME_POINTER=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
@ -1137,10 +1147,6 @@ CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Wed Jan 9 23:07:43 2008
# Linux kernel version: 2.6.26-rc3
# Mon May 26 13:30:20 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@ -70,11 +72,21 @@ CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@ -98,10 +110,15 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@ -147,16 +164,19 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@ -170,9 +190,10 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@ -208,6 +229,7 @@ CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@ -252,8 +274,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@ -279,6 +303,7 @@ CONFIG_LLC=m
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -314,6 +339,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@ -368,6 +394,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@ -395,13 +422,18 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_IDE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@ -444,6 +476,9 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@ -469,11 +504,13 @@ CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@ -487,6 +524,7 @@ CONFIG_MACB=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@ -500,7 +538,6 @@ CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@ -556,6 +593,7 @@ CONFIG_MOUSE_GPIO=m
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -568,6 +606,7 @@ CONFIG_MOUSE_GPIO=m
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@ -575,21 +614,13 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@ -600,27 +631,23 @@ CONFIG_I2C_GPIO=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@ -637,9 +664,27 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
# GPIO Support
#
# CONFIG_DEBUG_GPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -659,12 +704,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
@ -682,8 +737,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@ -749,7 +804,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
@ -761,14 +820,12 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@ -781,6 +838,7 @@ CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@ -796,6 +854,7 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@ -806,17 +865,20 @@ CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=m
#
@ -825,6 +887,8 @@ CONFIG_LEDS_GPIO=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -853,19 +917,22 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -874,10 +941,6 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
@ -895,14 +958,11 @@ CONFIG_JBD=m
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@ -957,8 +1017,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@ -966,7 +1028,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@ -1028,11 +1089,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set
#
# Kernel hacking
@ -1040,6 +1096,7 @@ CONFIG_KPROBES=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@ -1050,7 +1107,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -1064,12 +1123,14 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@ -1081,52 +1142,90 @@ CONFIG_FORCED_INLINING=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Wed Jan 9 22:54:34 2008
# Linux kernel version: 2.6.26-rc3
# Mon May 26 13:33:05 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@ -75,11 +75,20 @@ CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@ -103,10 +112,15 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@ -152,16 +166,19 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@ -175,9 +192,10 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@ -234,8 +252,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@ -260,6 +276,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -295,6 +312,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@ -349,6 +367,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@ -376,13 +395,18 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_IDE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@ -427,6 +451,9 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@ -447,6 +474,7 @@ CONFIG_NETDEVICES=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@ -460,7 +488,6 @@ CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@ -516,6 +543,7 @@ CONFIG_MOUSE_GPIO=m
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -528,6 +556,7 @@ CONFIG_MOUSE_GPIO=m
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@ -535,21 +564,13 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@ -560,27 +581,23 @@ CONFIG_I2C_GPIO=m
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@ -597,9 +614,27 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
# GPIO Support
#
# CONFIG_DEBUG_GPIO is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -619,12 +654,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
@ -682,7 +727,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
@ -694,14 +743,12 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@ -714,6 +761,7 @@ CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@ -729,6 +777,7 @@ CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@ -739,17 +788,20 @@ CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=y
#
@ -758,6 +810,8 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -786,19 +840,22 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -807,11 +864,8 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
#
# Userspace I/O
#
CONFIG_UIO=m
# CONFIG_UIO_SMX is not set
#
# File systems
@ -828,14 +882,11 @@ CONFIG_JBD=m
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@ -891,8 +942,10 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
@ -943,11 +996,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set
#
# Kernel hacking
@ -955,6 +1003,7 @@ CONFIG_KPROBES=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@ -965,6 +1014,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -978,12 +1028,14 @@ CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@ -1000,6 +1052,8 @@ CONFIG_FORCED_INLINING=y
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7
# Wed Jan 9 23:04:20 2008
# Linux kernel version: 2.6.26-rc3
# Mon May 26 13:34:57 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@ -34,15 +34,15 @@ CONFIG_LOCALVERSION=""
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@ -54,24 +54,38 @@ CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_PROC_PAGE_MONITOR is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@ -115,16 +129,19 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
# CONFIG_NMI_DEBUGGING is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@ -134,20 +151,7 @@ CONFIG_CMDLINE=""
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_AT32AP=y
# CONFIG_CPU_FREQ is not set
#
# Bus options
@ -197,8 +201,6 @@ CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@ -222,6 +224,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@ -255,6 +258,7 @@ CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@ -321,6 +325,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@ -346,6 +351,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -358,6 +364,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_PDC is not set
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@ -365,15 +372,9 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@ -389,9 +390,24 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y
#
# GPIO Support
#
#
# I2C GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@ -411,12 +427,22 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
@ -434,8 +460,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@ -467,14 +493,12 @@ CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
@ -485,6 +509,7 @@ CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@ -499,8 +524,11 @@ CONFIG_USB_ETH=y
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -519,15 +547,17 @@ CONFIG_RTC_INTF_DEV=y
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@ -536,18 +566,14 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@ -588,6 +613,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@ -608,6 +634,8 @@ CONFIG_MAGIC_SYSRQ=y
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set

View File

@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64);
*/
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(copy_page);
/*
* Userspace access stuff.
@ -41,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(strnlen_user);
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);

View File

@ -14,7 +14,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);

View File

@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void)
{
return cpufreq_register_driver(&at32_driver);
}
arch_initcall(at32_cpufreq_init);
late_initcall(at32_cpufreq_init);

View File

@ -479,16 +479,6 @@ comment "Memory Setup"
comment "Misc"
config ENET_FLASH_PIN
int "PF port/pin used for flash and ethernet sharing"
depends on (BFIN533_STAMP)
default 0
help
PF port/pin used for flash and ethernet sharing to allow other PF
pins to be used on other platforms without having to touch common
code.
For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc.
choice
prompt "Blackfin Exception Scratch Register"
default BFIN_SCRATCH_REG_RETN
@ -695,6 +685,8 @@ choice
prompt "Uncached SDRAM region"
default DMA_UNCACHED_1M
depends on BFIN_DMA_5XX
config DMA_UNCACHED_4M
bool "Enable 4M DMA region"
config DMA_UNCACHED_2M
bool "Enable 2M DMA region"
config DMA_UNCACHED_1M

View File

@ -1,6 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22.16
# Linux kernel version: 2.6.24.7
# Fri May 16 10:02:29 2008
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@ -13,35 +14,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@ -64,32 +64,24 @@ CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
# CONFIG_NP2 is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@ -141,7 +133,6 @@ CONFIG_BF_REV_0_0=y
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF52x=y
CONFIG_BFIN_SINGLE_CORE=y
CONFIG_MEM_MT48LC32M16A2TG_75=y
CONFIG_BFIN527_EZKIT=y
@ -227,12 +218,14 @@ CONFIG_IRQ_USB_DMA=11
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_MEM_SIZE=512
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
CONFIG_MAX_SCLK_HZ=133333333
@ -246,13 +239,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# Memory Setup
# Misc
#
CONFIG_MAX_MEM_SIZE=512
CONFIG_MEM_ADD_WIDTH=10
CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@ -288,12 +285,14 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
# CONFIG_DMA_UNCACHED_NONE is not set
@ -338,10 +337,6 @@ CONFIG_BANK_3=0xFFC0
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
@ -357,8 +352,14 @@ CONFIG_BINFMT_ZFLAT=y
# Power management options
#
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Networking
#
@ -395,6 +396,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -421,10 +423,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
@ -444,6 +442,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
@ -452,14 +451,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
@ -479,6 +475,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@ -542,39 +539,27 @@ CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
@ -582,22 +567,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
@ -611,21 +592,24 @@ CONFIG_PHYLIB=y
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_BFIN_MAC=y
CONFIG_BFIN_MAC_USE_L1=y
CONFIG_BFIN_TX_DESC_NUM=10
CONFIG_BFIN_RX_DESC_NUM=20
CONFIG_BFIN_MAC_RMII=y
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
@ -635,6 +619,15 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@ -642,15 +635,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
@ -665,7 +650,6 @@ CONFIG_INPUT=y
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@ -697,7 +681,6 @@ CONFIG_INPUT_MISC=y
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
@ -706,7 +689,7 @@ CONFIG_BFIN_OTP=y
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
# CONFIG_AD5304 is not set
# CONFIG_SIMPLE_GPIO is not set
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
@ -735,27 +718,11 @@ CONFIG_UNIX98_PTYS=y
# CAN, the car bus and industrial fieldbus
#
# CONFIG_CAN4LINUX is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
@ -777,21 +744,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_AD5252 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
# CONFIG_SENSORS_PCA9543 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -814,14 +784,11 @@ CONFIG_SPI_BFIN=y
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@ -829,12 +796,12 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@ -849,13 +816,16 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@ -865,6 +835,25 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
@ -881,72 +870,133 @@ CONFIG_HWMON=y
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# HID Devices
#
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB support
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Enable Host or Gadget support to see Inventra options
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
#
# Blackfin high speed USB support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_MUSB_LOGLEVEL=0
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -966,6 +1016,7 @@ CONFIG_RTC_INTF_DEV=y
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
@ -973,6 +1024,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
#
# SPI RTC drivers
@ -984,8 +1036,10 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@ -994,22 +1048,9 @@ CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_BFIN=y
#
# DMA Engine support
# Userspace I/O
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# PBX support
#
# CONFIG_PBX is not set
# CONFIG_UIO is not set
#
# File systems
@ -1054,7 +1095,6 @@ CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@ -1080,10 +1120,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
@ -1092,10 +1134,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@ -1115,17 +1154,12 @@ CONFIG_SMB_FS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@ -1166,21 +1200,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@ -1188,6 +1217,7 @@ CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@ -1207,11 +1237,8 @@ CONFIG_ACCESS_CHECK=y
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
#
# Cryptographic options
#
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_CRYPTO is not set
#
@ -1222,6 +1249,7 @@ CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m

View File

@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22.16
# Linux kernel version: 2.6.24.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@ -64,32 +63,24 @@ CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
# CONFIG_NP2 is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@ -141,7 +132,6 @@ CONFIG_BF_REV_0_0=y
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF54x=y
CONFIG_BFIN_SINGLE_CORE=y
CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_RTC=8
CONFIG_IRQ_SPORT0_RX=9
@ -169,6 +159,7 @@ CONFIG_IRQ_TIMER8=11
CONFIG_IRQ_TIMER9=11
CONFIG_IRQ_TIMER10=11
CONFIG_BFIN548_EZKIT=y
# CONFIG_BFIN548_BLUETECHNIX_CM is not set
#
# BF548 Specific Configuration
@ -262,12 +253,14 @@ CONFIG_PINT3_ASSIGN=0x02020303
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
CONFIG_MAX_MEM_SIZE=512
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
CONFIG_MAX_SCLK_HZ=133333333
@ -281,14 +274,17 @@ CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# Memory Setup
# Misc
#
CONFIG_MAX_MEM_SIZE=512
# CONFIG_MEM_MT46V32M16_6T is not set
CONFIG_MEM_MT46V32M16_5B=y
CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@ -324,12 +320,14 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
# CONFIG_DMA_UNCACHED_4M is not set
CONFIG_DMA_UNCACHED_2M=y
# CONFIG_DMA_UNCACHED_1M is not set
# CONFIG_DMA_UNCACHED_NONE is not set
@ -377,10 +375,6 @@ CONFIG_EBIU_FCTLVAL=0x6
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
@ -396,6 +390,7 @@ CONFIG_BINFMT_ZFLAT=y
# Power management options
#
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
@ -439,6 +434,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -465,10 +461,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
@ -488,6 +480,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
@ -496,14 +489,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
@ -523,6 +513,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@ -587,39 +578,27 @@ CONFIG_MTD_NAND_BF5XX_HWECC=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
@ -627,6 +606,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@ -657,43 +637,35 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_BF54X=y
CONFIG_PATA_BF54X_DMA=y
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_SMSC911X=y
# CONFIG_DM9000 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
@ -703,6 +675,15 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@ -710,15 +691,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
@ -733,9 +706,6 @@ CONFIG_INPUT=y
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
@ -758,6 +728,7 @@ CONFIG_KEYBOARD_BFIN=y
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
@ -787,7 +758,6 @@ CONFIG_INPUT_MISC=y
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
@ -796,7 +766,7 @@ CONFIG_BFIN_OTP=y
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
# CONFIG_AD5304 is not set
# CONFIG_SIMPLE_GPIO is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
@ -830,27 +800,11 @@ CONFIG_UNIX98_PTYS=y
# CAN, the car bus and industrial fieldbus
#
# CONFIG_CAN4LINUX is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
@ -872,21 +826,24 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_AD5252 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
# CONFIG_SENSORS_PCA9543 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@ -909,14 +866,11 @@ CONFIG_SPI_BFIN=y
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
#
# Dallas's 1-wire bus
#
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@ -924,12 +878,12 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@ -944,13 +898,16 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@ -960,6 +917,25 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
@ -972,23 +948,20 @@ CONFIG_HWMON=y
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@ -1003,18 +976,24 @@ CONFIG_FB_DEFERRED_IO=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_BFIN_7171 is not set
# CONFIG_FB_BFIN_7393 is not set
CONFIG_FB_BF54X_LQ043=y
# CONFIG_FB_BFIN_T350MCQB is not set
# CONFIG_FB_BFIN_7393 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
@ -1064,11 +1043,22 @@ CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# SPI devices
#
#
# ALSA Blackfin devices
#
# CONFIG_SND_BLACKFIN_AD1836 is not set
# CONFIG_SND_BFIN_AD73311 is not set
# CONFIG_SND_BFIN_AD73322 is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
@ -1084,6 +1074,10 @@ CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
CONFIG_SND_BF5XX_SPORT_NUM=0
CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
#
# SoC Audio support for SuperH
#
CONFIG_SND_SOC_AD1980=y
#
@ -1091,29 +1085,129 @@ CONFIG_SND_SOC_AD1980=y
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
#
# HID Devices
#
CONFIG_HID=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB support
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Enable Host or Gadget support to see Inventra options
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
#
# Blackfin high speed USB support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_MUSB_HDRC_HCD=y
# CONFIG_MUSB_PIO_ONLY is not set
# CONFIG_USB_INVENTRA_DMA is not set
# CONFIG_USB_TI_CPPI_DMA is not set
CONFIG_USB_MUSB_LOGLEVEL=0
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
@ -1126,37 +1220,17 @@ CONFIG_MMC=m
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_SDH_BFIN=m
# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
# CONFIG_MMC_SPI is not set
# CONFIG_SPI_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -1176,6 +1250,7 @@ CONFIG_RTC_INTF_DEV=y
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
@ -1183,6 +1258,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
#
# SPI RTC drivers
@ -1194,8 +1270,10 @@ CONFIG_RTC_INTF_DEV=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@ -1204,22 +1282,9 @@ CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_BFIN=y
#
# DMA Engine support
# Userspace I/O
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# PBX support
#
# CONFIG_PBX is not set
# CONFIG_UIO is not set
#
# File systems
@ -1280,7 +1345,6 @@ CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@ -1306,10 +1370,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
@ -1318,10 +1384,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@ -1352,7 +1415,6 @@ CONFIG_CIFS=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
@ -1375,10 +1437,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@ -1419,21 +1477,16 @@ CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Profiling support
#
CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@ -1441,6 +1494,7 @@ CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@ -1460,11 +1514,8 @@ CONFIG_ACCESS_CHECK=y
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
#
# Cryptographic options
#
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_CRYPTO is not set
#
@ -1475,6 +1526,7 @@ CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m

View File

@ -212,7 +212,7 @@ CONFIG_HZ=250
#
# Memory Setup
#
CONFIG_MEM_SIZE=64
CONFIG_MAX_MEM_SIZE=64
CONFIG_MEM_ADD_WIDTH=10
#

View File

@ -90,6 +90,17 @@ int request_dma(unsigned int channel, char *device_id)
{
pr_debug("request_dma() : BEGIN \n");
#if defined(CONFIG_BF561) && ANOMALY_05000182
if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) {
if (get_cclk() > 500000000) {
printk(KERN_WARNING
"Request IMDMA failed due to ANOMALY 05000182\n");
return -EFAULT;
}
}
#endif
mutex_lock(&(dma_ch[channel].dmalock));
if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED)

View File

@ -1130,6 +1130,25 @@ void bfin_gpio_irq_prepare(unsigned gpio)
#else
int gpio_get_value(unsigned gpio)
{
unsigned long flags;
int ret;
if (unlikely(get_gpio_edge(gpio))) {
local_irq_save(flags);
set_gpio_edge(gpio, 0);
ret = get_gpio_data(gpio);
set_gpio_edge(gpio, 1);
local_irq_restore(flags);
return ret;
} else
return get_gpio_data(gpio);
}
EXPORT_SYMBOL(gpio_get_value);
int gpio_direction_input(unsigned gpio)
{
unsigned long flags;

View File

@ -90,7 +90,9 @@ EXPORT_SYMBOL(__umodsi3);
EXPORT_SYMBOL(outsb);
EXPORT_SYMBOL(insb);
EXPORT_SYMBOL(outsw);
EXPORT_SYMBOL(outsw_8);
EXPORT_SYMBOL(insw);
EXPORT_SYMBOL(insw_8);
EXPORT_SYMBOL(outsl);
EXPORT_SYMBOL(insl);
EXPORT_SYMBOL(insl_16);

View File

@ -10,8 +10,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/io.h>
#include <asm/io.h>
#include <asm/blackfin.h>
#include <asm/gptimers.h>

View File

@ -34,7 +34,6 @@
#include <linux/fs.h>
static struct fs_struct init_fs = INIT_FS;
static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);

View File

@ -67,7 +67,7 @@ void __init trap_init(void)
CSYNC();
}
void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
int kstack_depth_to_print = 48;
@ -364,13 +364,13 @@ asmlinkage void trap_c(struct pt_regs *fp)
/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
case VEC_CPLB_MHIT:
info.si_code = ILL_CPLB_MULHIT;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
printk(KERN_NOTICE "NULL pointer access (probably)\n");
#else
sig = SIGILL;
printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
if (saved_dcplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "NULL pointer access\n");
else
#endif
printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x28 - Emulation Watchpoint, handled here */
@ -419,13 +419,13 @@ asmlinkage void trap_c(struct pt_regs *fp)
/* 0x2D - Instruction CPLB Multiple Hits, handled here */
case VEC_CPLB_I_MHIT:
info.si_code = ILL_CPLB_MULHIT;
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
#else
sig = SIGILL;
printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
if (saved_icplb_fault_addr < FIXED_CODE_START)
printk(KERN_NOTICE "Jump to NULL address\n");
else
#endif
printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x2E - Illegal use of Supervisor Resource, handled here */
@ -939,8 +939,6 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
oops_in_progress = 1;
printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);

View File

@ -72,9 +72,9 @@ static unsigned short do_csum(const unsigned char *buff, int len)
* This is a version of ip_compute_csum() optimized for IP headers,
* which always checksum on 4 octet boundaries.
*/
unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl)
{
return ~do_csum(iph, ihl * 4);
return (__force __sum16)~do_csum(iph, ihl * 4);
}
/*
@ -89,7 +89,7 @@ unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
*
* it's best to have buff aligned on a 32-bit boundary
*/
unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
__wsum csum_partial(const void *buff, int len, __wsum sum)
{
/*
* Just in case we get nasty checksum data...
@ -109,22 +109,22 @@ unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
unsigned short ip_compute_csum(const unsigned char *buff, int len)
__sum16 ip_compute_csum(const void *buff, int len)
{
return ~do_csum(buff, len);
return (__force __sum16)~do_csum(buff, len);
}
/*
* copy from fs while checksumming, otherwise like csum_partial
*/
unsigned int
csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
int len, int sum, int *csum_err)
__wsum
csum_partial_copy_from_user(const void __user *src, void *dst,
int len, __wsum sum, int *csum_err)
{
if (csum_err)
*csum_err = 0;
memcpy(dst, src, len);
memcpy(dst, (__force void *)src, len);
return csum_partial(dst, len, sum);
}
@ -132,8 +132,7 @@ csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
* copy from ds while checksumming, otherwise like csum_partial
*/
unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
int len, int sum)
__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
{
memcpy(dst, src, len);
return csum_partial(dst, len, sum);

View File

@ -7,7 +7,7 @@
* Description: Implementation of ins{bwl} for BlackFin processors using zero overhead loops.
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
* Copyright 2004-2008 Analog Devices Inc.
* Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
@ -63,6 +63,23 @@ ENTRY(_insw)
RTS;
ENDPROC(_insw)
ENTRY(_insw_8)
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
SSYNC;
LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
.Lword8_loop_s: R0 = W[P0];
B[P1++] = R0;
R0 = R0 >> 8;
B[P1++] = R0;
NOP;
.Lword8_loop_e: NOP;
sti R3;
RTS;
ENDPROC(_insw_8)
ENTRY(_insb)
P0 = R0; /* P0 = port */
cli R3;
@ -78,8 +95,6 @@ ENTRY(_insb)
RTS;
ENDPROC(_insb)
ENTRY(_insl_16)
P0 = R0; /* P0 = port */
cli R3;

View File

@ -7,7 +7,7 @@
* Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
*
* Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
* Copyright 2004-2006 Analog Devices Inc.
* Copyright 2004-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@ -63,3 +63,17 @@ ENTRY(_outsb)
.Lbyte_loop_e: B[P0] = R0;
RTS;
ENDPROC(_outsb)
ENTRY(_outsw_8)
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
.Lword8_loop_s: R1 = B[P1++];
R0 = B[P1++];
R0 = R0 << 8;
R0 = R0 + R1;
.Lword8_loop_e: W[P0] = R0;
RTS;
ENDPROC(_outsw_8)

View File

@ -451,9 +451,6 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@ -647,10 +644,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.irq = IRQ_PF6,
.irq = IRQ_PF8,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.chip_select = 2,
.controller_data = &spi_ad7877_chip_info,
},
#endif
@ -676,6 +673,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@ -799,13 +797,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
.type = "pcf8574_lcd",
},
#endif
#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.type = "pcf8574_keypad",
.irq = IRQ_PF8,
},
#endif
@ -1020,10 +1016,7 @@ static int __init stamp_init(void)
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

View File

@ -87,9 +87,6 @@ static struct platform_device smc91x_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@ -189,6 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@ -425,9 +423,7 @@ static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

View File

@ -111,7 +111,7 @@ static struct platform_device net2272_bfin_device = {
};
#endif
#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
static struct mtd_partition stamp_partitions[] = {
{
.name = "Bootloader",
@ -141,13 +141,17 @@ static struct resource stamp_flash_resource[] = {
.end = 0x203fffff,
.flags = IORESOURCE_MEM,
}, {
.start = CONFIG_ENET_FLASH_PIN,
.start = 0x7BB07BB0, /* AMBCTL0 setting when accessing flash */
.end = 0x7BB07BB0, /* AMBCTL1 setting when accessing flash */
.flags = IORESOURCE_MEM,
}, {
.start = GPIO_PF0,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device stamp_flash_device = {
.name = "BF5xx-Flash",
.name = "bfin-async-flash",
.id = 0,
.dev = {
.platform_data = &stamp_flash_data,
@ -157,9 +161,6 @@ static struct platform_device stamp_flash_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@ -316,6 +317,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@ -595,7 +597,7 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_gpios_device,
#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
&stamp_flash_device,
#endif
};
@ -617,15 +619,13 @@ static int __init stamp_init(void)
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN));
bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN);
bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
bfin_write_FIO_FLAG_S(PF0);
SSYNC();
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
@ -636,8 +636,8 @@ arch_initcall(stamp_init);
void native_machine_restart(char *cmd)
{
#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
bfin_write_FIO_INEN(~BIT_TO_SET);
bfin_write_FIO_DIR(BIT_TO_SET);
bfin_write_FIO_FLAG_C(BIT_TO_SET);
/* workaround pull up on cpld / flash pin not being strong enough */
bfin_write_FIO_INEN(~PF0);
bfin_write_FIO_DIR(PF0);
bfin_write_FIO_FLAG_C(PF0);
}

View File

@ -3,7 +3,7 @@
#
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o

View File

@ -1,183 +0,0 @@
/****************************************************
* LED1 ---- PF6 LED2 ---- PF7 *
* LED3 ---- PF8 LED4 ---- PF9 *
* LED5 ---- PF10 LED6 ---- PF11 *
****************************************************/
#include <linux/linkage.h>
#include <asm/blackfin.h>
/* All functions in this file save the registers they uses.
So there is no need to save any registers before calling them. */
.text;
/* Initialize LEDs. */
ENTRY(_led_init)
LINK 12;
[--SP] = P0;
[--SP] = R0;
[--SP] = R1;
[--SP] = R2;
R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
R2 = ~R1;
P0.H = hi(PORTF_FER);
P0.L = lo(PORTF_FER);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
P0.H = hi(PORTFIO_DIR);
P0.L = lo(PORTFIO_DIR);
R0 = W[P0](Z);
SSYNC;
R0 = R0 | R1;
W[P0] = R0.L;
SSYNC;
P0.H = hi(PORTFIO_INEN);
P0.L = lo(PORTFIO_INEN);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
R0 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_init, .-_led_init
/* Set one LED on. Leave other LEDs unchanged.
It expects the LED number passed through R0. */
ENTRY(_led_on)
LINK 12;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R0 = W[P0](Z);
SSYNC;
R0 = R0 | R1;
W[P0] = R0.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_on, .-_led_on
/* Set one LED off. Leave other LEDs unchanged. */
ENTRY(_led_off)
LINK 12;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
R1 = ~R1;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R1;
W[P0] = R0.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_off, .-_led_off
/* Toggle one LED. Leave other LEDs unchanged. */
ENTRY(_led_toggle)
LINK 12;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R0 = W[P0](Z);
SSYNC;
R0 = R0 ^ R1;
W[P0] = R0.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle, .-_led_toggle
/* Display the number using LEDs in binary format. */
ENTRY(_led_disp_num)
LINK 12;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R2 = 6(X);
R0 <<= R2;
R1 <<= R2;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R2 = W[P0](Z);
SSYNC;
R1 = ~R1;
R2 = R2 & R1;
R2 = R2 | R0;
W[P0] = R2.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_disp_num, .-_led_disp_num
/* Toggle the number using LEDs in binary format. */
ENTRY(_led_toggle_num)
LINK 12;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R1 = 6(X);
R0 <<= R1;
P0.H = hi(PORTFIO);
P0.L = lo(PORTFIO);
R1 = W[P0](Z);
SSYNC;
R1 = R1 ^ R0;
W[P0] = R1.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle_num, .-_led_toggle_num

View File

@ -400,9 +400,6 @@ static struct platform_device stamp_flash_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@ -629,6 +626,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@ -939,10 +937,7 @@ static int __init stamp_init(void)
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

View File

@ -2,5 +2,5 @@
# arch/blackfin/mach-bf548/boards/Makefile
#
obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o

View File

@ -684,7 +684,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
static int __init cm_bf548_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)

View File

@ -412,8 +412,6 @@ static struct platform_device ezkit_flash_device = {
};
#endif
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
/* SPI flash chip (m25p16) */
@ -481,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
};
#endif
static struct spi_board_info bf54x_spi_board_info[] __initdata = {
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
{
@ -527,6 +525,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
#endif
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@ -800,10 +799,7 @@ static int __init ezkit_init(void)
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bf54x_spi_board_info,
ARRAY_SIZE(bf54x_spi_board_info));
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}

View File

@ -1,172 +0,0 @@
/****************************************************
* LED1 ---- PG6 LED2 ---- PG7 *
* LED3 ---- PG8 LED4 ---- PG9 *
* LED5 ---- PG10 LED6 ---- PG11 *
****************************************************/
#include <linux/linkage.h>
#include <asm/blackfin.h>
/* All functions in this file save the registers they uses.
So there is no need to save any registers before calling them. */
.text;
/* Initialize LEDs. */
ENTRY(_led_init)
LINK 0;
[--SP] = P0;
[--SP] = R0;
[--SP] = R1;
[--SP] = R2;
R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
R2 = ~R1;
P0.H = hi(PORTG_FER);
P0.L = lo(PORTG_FER);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
P0.H = hi(PORTG_DIR_SET);
P0.L = lo(PORTG_DIR_SET);
W[P0] = R1.L;
SSYNC;
P0.H = hi(PORTG_INEN);
P0.L = lo(PORTG_INEN);
R0 = W[P0](Z);
SSYNC;
R0 = R0 & R2;
W[P0] = R0.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
R0 = [SP++];
P0 = [SP++];
RTS;
.size _led_init, .-_led_init
/* Set one LED on. Leave other LEDs unchanged.
It expects the LED number passed through R0. */
ENTRY(_led_on)
LINK 0;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTG_SET);
P0.L = lo(PORTG_SET);
W[P0] = R1.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_on, .-_led_on
/* Set one LED off. Leave other LEDs unchanged. */
ENTRY(_led_off)
LINK 0;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTG_CLEAR);
P0.L = lo(PORTG_CLEAR);
W[P0] = R1.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_off, .-_led_off
/* Toggle one LED. Leave other LEDs unchanged. */
ENTRY(_led_toggle)
LINK 0;
[--SP] = P0;
[--SP] = R1;
CALL _led_init;
R1 = 1;
R0 += 5;
R1 <<= R0;
P0.H = hi(PORTG);
P0.L = lo(PORTG);
R0 = W[P0](Z);
SSYNC;
R0 = R0 ^ R1;
W[P0] = R0.L;
SSYNC;
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle, .-_led_toggle
/* Display the number using LEDs in binary format. */
ENTRY(_led_disp_num)
LINK 0;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R2 = 6(X);
R0 <<= R2;
R1 <<= R2;
P0.H = hi(PORTG);
P0.L = lo(PORTG);
R2 = W[P0](Z);
SSYNC;
R1 = ~R1;
R2 = R2 & R1;
R2 = R2 | R0;
W[P0] = R2.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_disp_num, .-_led_disp_num
/* Toggle the number using LEDs in binary format. */
ENTRY(_led_toggle_num)
LINK 0;
[--SP] = P0;
[--SP] = R1;
[--SP] = R2;
CALL _led_init;
R1 = 0x3f(X);
R0 = R0 & R1;
R1 = 6(X);
R0 <<= R1;
P0.H = hi(PORTG);
P0.L = lo(PORTG);
R1 = W[P0](Z);
SSYNC;
R1 = R1 ^ R0;
W[P0] = R1.L;
SSYNC;
R2 = [SP++];
R1 = [SP++];
P0 = [SP++];
UNLINK;
RTS;
.size _led_toggle_num, .-_led_toggle_num

Some files were not shown because too many files have changed in this diff Show More