PM / devfreq: exynos: Add generic exynos bus frequency driver

This patch adds the generic exynos bus frequency driver for AMBA AXI bus
of sub-blocks in exynos SoC with DEVFREQ framework. The Samsung Exynos SoC
have the common architecture for bus between DRAM and sub-blocks in SoC.
This driver can support the generic bus frequency driver for Exynos SoCs.

In devicetree, Each bus block has a bus clock, regulator, operation-point
and devfreq-event devices which measure the utilization of each bus block.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board]
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This commit is contained in:
Chanwoo Choi 2015-11-03 19:04:16 +09:00 committed by MyungJoo Ham
parent 04974df804
commit 0722249ac1
3 changed files with 459 additions and 0 deletions

View File

@ -66,6 +66,21 @@ config DEVFREQ_GOV_USERSPACE
comment "DEVFREQ Drivers"
config ARM_EXYNOS_BUS_DEVFREQ
bool "ARM EXYNOS Generic Memory Bus DEVFREQ Driver"
depends on ARCH_EXYNOS
select DEVFREQ_GOV_SIMPLE_ONDEMAND
select DEVFREQ_EVENT_EXYNOS_PPMU
select PM_DEVFREQ_EVENT
select PM_OPP
help
This adds the common DEVFREQ driver for Exynos Memory bus. Exynos
Memory bus has one more group of memory bus (e.g, MIF and INT block).
Each memory bus group could contain many memoby bus block. It reads
PPMU counters of memory controllers by using DEVFREQ-event device
and adjusts the operating frequencies and voltages with OPP support.
This does not yet operate with optimal voltages.
config ARM_EXYNOS4_BUS_DEVFREQ
bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM

View File

@ -6,6 +6,7 @@ obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE) += governor_powersave.o
obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o
# DEVFREQ Drivers
obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o
obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/
obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/
obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o

View File

@ -0,0 +1,443 @@
/*
* Generic Exynos Bus frequency driver with DEVFREQ Framework
*
* Copyright (c) 2015 Samsung Electronics Co., Ltd.
* Author : Chanwoo Choi <cw00.choi@samsung.com>
*
* This driver support Exynos Bus frequency feature by using
* DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/devfreq.h>
#include <linux/devfreq-event.h>
#include <linux/device.h>
#include <linux/export.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_opp.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#define DEFAULT_SATURATION_RATIO 40
#define DEFAULT_VOLTAGE_TOLERANCE 2
struct exynos_bus {
struct device *dev;
struct devfreq *devfreq;
struct devfreq_event_dev **edev;
unsigned int edev_count;
struct mutex lock;
struct dev_pm_opp *curr_opp;
struct regulator *regulator;
struct clk *clk;
unsigned int voltage_tolerance;
unsigned int ratio;
};
/*
* Control the devfreq-event device to get the current state of bus
*/
#define exynos_bus_ops_edev(ops) \
static int exynos_bus_##ops(struct exynos_bus *bus) \
{ \
int i, ret; \
\
for (i = 0; i < bus->edev_count; i++) { \
if (!bus->edev[i]) \
continue; \
ret = devfreq_event_##ops(bus->edev[i]); \
if (ret < 0) \
return ret; \
} \
\
return 0; \
}
exynos_bus_ops_edev(enable_edev);
exynos_bus_ops_edev(disable_edev);
exynos_bus_ops_edev(set_event);
static int exynos_bus_get_event(struct exynos_bus *bus,
struct devfreq_event_data *edata)
{
struct devfreq_event_data event_data;
unsigned long load_count = 0, total_count = 0;
int i, ret = 0;
for (i = 0; i < bus->edev_count; i++) {
if (!bus->edev[i])
continue;
ret = devfreq_event_get_event(bus->edev[i], &event_data);
if (ret < 0)
return ret;
if (i == 0 || event_data.load_count > load_count) {
load_count = event_data.load_count;
total_count = event_data.total_count;
}
}
edata->load_count = load_count;
edata->total_count = total_count;
return ret;
}
/*
* Must necessary function for devfreq governor
*/
static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
struct dev_pm_opp *new_opp;
unsigned long old_freq, new_freq, old_volt, new_volt, tol;
int ret = 0;
/* Get new opp-bus instance according to new bus clock */
rcu_read_lock();
new_opp = devfreq_recommended_opp(dev, freq, flags);
if (IS_ERR(new_opp)) {
dev_err(dev, "failed to get recommended opp instance\n");
rcu_read_unlock();
return PTR_ERR(new_opp);
}
new_freq = dev_pm_opp_get_freq(new_opp);
new_volt = dev_pm_opp_get_voltage(new_opp);
old_freq = dev_pm_opp_get_freq(bus->curr_opp);
old_volt = dev_pm_opp_get_voltage(bus->curr_opp);
rcu_read_unlock();
if (old_freq == new_freq)
return 0;
tol = new_volt * bus->voltage_tolerance / 100;
/* Change voltage and frequency according to new OPP level */
mutex_lock(&bus->lock);
if (old_freq < new_freq) {
ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
if (ret < 0) {
dev_err(bus->dev, "failed to set voltage\n");
goto out;
}
}
ret = clk_set_rate(bus->clk, new_freq);
if (ret < 0) {
dev_err(dev, "failed to change clock of bus\n");
clk_set_rate(bus->clk, old_freq);
goto out;
}
if (old_freq > new_freq) {
ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
if (ret < 0) {
dev_err(bus->dev, "failed to set voltage\n");
goto out;
}
}
bus->curr_opp = new_opp;
dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n",
old_freq/1000, new_freq/1000);
out:
mutex_unlock(&bus->lock);
return ret;
}
static int exynos_bus_get_dev_status(struct device *dev,
struct devfreq_dev_status *stat)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
struct devfreq_event_data edata;
int ret;
rcu_read_lock();
stat->current_frequency = dev_pm_opp_get_freq(bus->curr_opp);
rcu_read_unlock();
ret = exynos_bus_get_event(bus, &edata);
if (ret < 0) {
stat->total_time = stat->busy_time = 0;
goto err;
}
stat->busy_time = (edata.load_count * 100) / bus->ratio;
stat->total_time = edata.total_count;
dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time,
stat->total_time);
err:
ret = exynos_bus_set_event(bus);
if (ret < 0) {
dev_err(dev, "failed to set event to devfreq-event devices\n");
return ret;
}
return ret;
}
static void exynos_bus_exit(struct device *dev)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
int ret;
ret = exynos_bus_disable_edev(bus);
if (ret < 0)
dev_warn(dev, "failed to disable the devfreq-event devices\n");
if (bus->regulator)
regulator_disable(bus->regulator);
dev_pm_opp_of_remove_table(dev);
}
static int exynos_bus_parse_of(struct device_node *np,
struct exynos_bus *bus)
{
struct device *dev = bus->dev;
unsigned long rate;
int i, ret, count, size;
/* Get the clock to provide each bus with source clock */
bus->clk = devm_clk_get(dev, "bus");
if (IS_ERR(bus->clk)) {
dev_err(dev, "failed to get bus clock\n");
return PTR_ERR(bus->clk);
}
ret = clk_prepare_enable(bus->clk);
if (ret < 0) {
dev_err(dev, "failed to get enable clock\n");
return ret;
}
/* Get the freq/voltage OPP table to scale the bus frequency */
rcu_read_lock();
ret = dev_pm_opp_of_add_table(dev);
if (ret < 0) {
dev_err(dev, "failed to get OPP table\n");
rcu_read_unlock();
goto err_clk;
}
rate = clk_get_rate(bus->clk);
bus->curr_opp = dev_pm_opp_find_freq_ceil(dev, &rate);
if (IS_ERR(bus->curr_opp)) {
dev_err(dev, "failed to find dev_pm_opp\n");
rcu_read_unlock();
ret = PTR_ERR(bus->curr_opp);
goto err_opp;
}
rcu_read_unlock();
/* Get the regulator to provide each bus with the power */
bus->regulator = devm_regulator_get(dev, "vdd");
if (IS_ERR(bus->regulator)) {
dev_err(dev, "failed to get VDD regulator\n");
ret = PTR_ERR(bus->regulator);
goto err_opp;
}
ret = regulator_enable(bus->regulator);
if (ret < 0) {
dev_err(dev, "failed to enable VDD regulator\n");
goto err_opp;
}
/*
* Get the devfreq-event devices to get the current utilization of
* buses. This raw data will be used in devfreq ondemand governor.
*/
count = devfreq_event_get_edev_count(dev);
if (count < 0) {
dev_err(dev, "failed to get the count of devfreq-event dev\n");
ret = count;
goto err_regulator;
}
bus->edev_count = count;
size = sizeof(*bus->edev) * count;
bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
if (!bus->edev) {
ret = -ENOMEM;
goto err_regulator;
}
for (i = 0; i < count; i++) {
bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, i);
if (IS_ERR(bus->edev[i])) {
ret = -EPROBE_DEFER;
goto err_regulator;
}
}
/*
* Optionally, Get the saturation ratio according to Exynos SoC
* When measuring the utilization of each AXI bus with devfreq-event
* devices, the measured real cycle might be much lower than the
* total cycle of bus during sampling rate. In result, the devfreq
* simple-ondemand governor might not decide to change the current
* frequency due to too utilization (= real cycle/total cycle).
* So, this property is used to adjust the utilization when calculating
* the busy_time in exynos_bus_get_dev_status().
*/
if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio))
bus->ratio = DEFAULT_SATURATION_RATIO;
if (of_property_read_u32(np, "exynos,voltage-tolerance",
&bus->voltage_tolerance))
bus->voltage_tolerance = DEFAULT_VOLTAGE_TOLERANCE;
return 0;
err_regulator:
regulator_disable(bus->regulator);
err_opp:
dev_pm_opp_of_remove_table(dev);
err_clk:
clk_disable_unprepare(bus->clk);
return ret;
}
static int exynos_bus_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct devfreq_dev_profile *profile;
struct devfreq_simple_ondemand_data *ondemand_data;
struct exynos_bus *bus;
int ret;
if (!np) {
dev_err(dev, "failed to find devicetree node\n");
return -EINVAL;
}
bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
if (!bus)
return -ENOMEM;
mutex_init(&bus->lock);
bus->dev = &pdev->dev;
platform_set_drvdata(pdev, bus);
/* Parse the device-tree to get the resource information */
ret = exynos_bus_parse_of(np, bus);
if (ret < 0)
return ret;
/* Initalize the struct profile and governor data */
profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
if (!profile)
return -ENOMEM;
profile->polling_ms = 50;
profile->target = exynos_bus_target;
profile->get_dev_status = exynos_bus_get_dev_status;
profile->exit = exynos_bus_exit;
ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
if (!ondemand_data)
return -ENOMEM;
ondemand_data->upthreshold = 40;
ondemand_data->downdifferential = 5;
/* Add devfreq device to monitor and handle the exynos bus */
bus->devfreq = devm_devfreq_add_device(dev, profile, "simple_ondemand",
ondemand_data);
if (IS_ERR(bus->devfreq)) {
dev_err(dev, "failed to add devfreq device\n");
return PTR_ERR(bus->devfreq);
}
/* Register opp_notifier to catch the change of OPP */
ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
if (ret < 0) {
dev_err(dev, "failed to register opp notifier\n");
return ret;
}
/*
* Enable devfreq-event to get raw data which is used to determine
* current bus load.
*/
ret = exynos_bus_enable_edev(bus);
if (ret < 0) {
dev_err(dev, "failed to enable devfreq-event devices\n");
return ret;
}
ret = exynos_bus_set_event(bus);
if (ret < 0) {
dev_err(dev, "failed to set event to devfreq-event devices\n");
return ret;
}
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int exynos_bus_resume(struct device *dev)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
int ret;
ret = exynos_bus_enable_edev(bus);
if (ret < 0) {
dev_err(dev, "failed to enable the devfreq-event devices\n");
return ret;
}
return 0;
}
static int exynos_bus_suspend(struct device *dev)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
int ret;
ret = exynos_bus_disable_edev(bus);
if (ret < 0) {
dev_err(dev, "failed to disable the devfreq-event devices\n");
return ret;
}
return 0;
}
#endif
static const struct dev_pm_ops exynos_bus_pm = {
SET_SYSTEM_SLEEP_PM_OPS(exynos_bus_suspend, exynos_bus_resume)
};
static const struct of_device_id exynos_bus_of_match[] = {
{ .compatible = "samsung,exynos-bus", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, exynos_bus_of_match);
static struct platform_driver exynos_bus_platdrv = {
.probe = exynos_bus_probe,
.driver = {
.name = "exynos-bus",
.pm = &exynos_bus_pm,
.of_match_table = of_match_ptr(exynos_bus_of_match),
},
};
module_platform_driver(exynos_bus_platdrv);
MODULE_DESCRIPTION("Generic Exynos Bus frequency driver");
MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
MODULE_LICENSE("GPL v2");