leds: lm3692x: Support LED sync configuration
The LM36922 has one output but can sync current to 2 LED strings. The user may only use one sync so the other syncs need to be disabled. The LM36923 has 3 LED syncs. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This commit is contained in:
parent
581e3ca38a
commit
07abd4325e
|
@ -15,6 +15,9 @@
|
|||
#include <linux/slab.h>
|
||||
#include <uapi/linux/uleds.h>
|
||||
|
||||
#define LM36922_MODEL 0
|
||||
#define LM36923_MODEL 1
|
||||
|
||||
#define LM3692X_REV 0x0
|
||||
#define LM3692X_RESET 0x1
|
||||
#define LM3692X_EN 0x10
|
||||
|
@ -33,6 +36,9 @@
|
|||
#define LM3692X_DEVICE_EN BIT(0)
|
||||
#define LM3692X_LED1_EN BIT(1)
|
||||
#define LM3692X_LED2_EN BIT(2)
|
||||
#define LM36923_LED3_EN BIT(3)
|
||||
#define LM3692X_ENABLE_MASK (LM3692X_DEVICE_EN | LM3692X_LED1_EN | \
|
||||
LM3692X_LED2_EN | LM36923_LED3_EN)
|
||||
|
||||
/* Brightness Control Bits */
|
||||
#define LM3692X_BL_ADJ_POL BIT(0)
|
||||
|
@ -98,6 +104,8 @@
|
|||
* @enable_gpio - VDDIO/EN gpio to enable communication interface
|
||||
* @regulator - LED supply regulator pointer
|
||||
* @label - LED label
|
||||
* @led_enable - LED sync to be enabled
|
||||
* @model_id - Current device model ID enumerated
|
||||
*/
|
||||
struct lm3692x_led {
|
||||
struct mutex lock;
|
||||
|
@ -107,6 +115,8 @@ struct lm3692x_led {
|
|||
struct gpio_desc *enable_gpio;
|
||||
struct regulator *regulator;
|
||||
char label[LED_MAX_NAME_SIZE];
|
||||
int led_enable;
|
||||
int model_id;
|
||||
};
|
||||
|
||||
static const struct reg_default lm3692x_reg_defs[] = {
|
||||
|
@ -189,6 +199,7 @@ out:
|
|||
|
||||
static int lm3692x_init(struct lm3692x_led *led)
|
||||
{
|
||||
int enable_state;
|
||||
int ret;
|
||||
|
||||
if (led->regulator) {
|
||||
|
@ -215,9 +226,25 @@ static int lm3692x_init(struct lm3692x_led *led)
|
|||
|
||||
/*
|
||||
* For glitch free operation, the following data should
|
||||
* only be written while device enable bit is 0
|
||||
* only be written while LEDx enable bits are 0 and the device enable
|
||||
* bit is set to 1.
|
||||
* per Section 7.5.14 of the data sheet
|
||||
*/
|
||||
ret = regmap_write(led->regmap, LM3692X_EN, LM3692X_DEVICE_EN);
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
/* Set the brightness to 0 so when enabled the LEDs do not come
|
||||
* on with full brightness.
|
||||
*/
|
||||
ret = regmap_write(led->regmap, LM3692X_BRT_MSB, 0);
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
ret = regmap_write(led->regmap, LM3692X_BRT_LSB, 0);
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
ret = regmap_write(led->regmap, LM3692X_PWM_CTRL,
|
||||
LM3692X_PWM_FILTER_100 | LM3692X_PWM_SAMP_24MHZ);
|
||||
if (ret)
|
||||
|
@ -247,6 +274,38 @@ static int lm3692x_init(struct lm3692x_led *led)
|
|||
if (ret)
|
||||
goto out;
|
||||
|
||||
switch (led->led_enable) {
|
||||
case 0:
|
||||
default:
|
||||
if (led->model_id == LM36923_MODEL)
|
||||
enable_state = LM3692X_LED1_EN | LM3692X_LED2_EN |
|
||||
LM36923_LED3_EN;
|
||||
else
|
||||
enable_state = LM3692X_LED1_EN | LM3692X_LED2_EN;
|
||||
|
||||
break;
|
||||
case 1:
|
||||
enable_state = LM3692X_LED1_EN;
|
||||
break;
|
||||
case 2:
|
||||
enable_state = LM3692X_LED2_EN;
|
||||
break;
|
||||
|
||||
case 3:
|
||||
if (led->model_id == LM36923_MODEL) {
|
||||
enable_state = LM36923_LED3_EN;
|
||||
break;
|
||||
}
|
||||
|
||||
ret = -EINVAL;
|
||||
dev_err(&led->client->dev,
|
||||
"LED3 sync not available on this device\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
ret = regmap_update_bits(led->regmap, LM3692X_EN, LM3692X_ENABLE_MASK,
|
||||
enable_state | LM3692X_DEVICE_EN);
|
||||
|
||||
return ret;
|
||||
out:
|
||||
dev_err(&led->client->dev, "Fail writing initialization values\n");
|
||||
|
@ -263,55 +322,29 @@ out:
|
|||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lm3692x_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
static int lm3692x_probe_dt(struct lm3692x_led *led)
|
||||
{
|
||||
struct fwnode_handle *child = NULL;
|
||||
struct lm3692x_led *led;
|
||||
const char *name;
|
||||
int ret;
|
||||
|
||||
led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
|
||||
if (!led)
|
||||
return -ENOMEM;
|
||||
|
||||
led->enable_gpio = devm_gpiod_get_optional(&client->dev,
|
||||
led->enable_gpio = devm_gpiod_get_optional(&led->client->dev,
|
||||
"enable", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(led->enable_gpio)) {
|
||||
ret = PTR_ERR(led->enable_gpio);
|
||||
dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
led->regulator = devm_regulator_get(&client->dev, "vled");
|
||||
if (IS_ERR(led->regulator))
|
||||
led->regulator = NULL;
|
||||
|
||||
led->client = client;
|
||||
led->led_dev.name = led->label;
|
||||
led->led_dev.brightness_set_blocking = lm3692x_brightness_set;
|
||||
|
||||
mutex_init(&led->lock);
|
||||
|
||||
i2c_set_clientdata(client, led);
|
||||
|
||||
led->regmap = devm_regmap_init_i2c(client, &lm3692x_regmap_config);
|
||||
if (IS_ERR(led->regmap)) {
|
||||
ret = PTR_ERR(led->regmap);
|
||||
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
||||
dev_err(&led->client->dev, "Failed to get enable gpio: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = lm3692x_init(led);
|
||||
if (ret)
|
||||
return ret;
|
||||
led->regulator = devm_regulator_get(&led->client->dev, "vled");
|
||||
if (IS_ERR(led->regulator))
|
||||
led->regulator = NULL;
|
||||
|
||||
child = device_get_next_child_node(&led->client->dev, child);
|
||||
if (!child) {
|
||||
dev_err(&led->client->dev, "No LED Child node\n");
|
||||
return ret;
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
fwnode_property_read_string(child, "linux,default-trigger",
|
||||
|
@ -325,14 +358,57 @@ static int lm3692x_probe(struct i2c_client *client,
|
|||
snprintf(led->label, sizeof(led->label),
|
||||
"%s:%s", led->client->name, name);
|
||||
|
||||
led->led_dev.dev->of_node = to_of_node(child);
|
||||
|
||||
ret = devm_led_classdev_register(&client->dev, &led->led_dev);
|
||||
ret = fwnode_property_read_u32(child, "reg", &led->led_enable);
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "led register err: %d\n", ret);
|
||||
dev_err(&led->client->dev, "reg DT property missing\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
led->led_dev.name = led->label;
|
||||
|
||||
ret = devm_led_classdev_register(&led->client->dev, &led->led_dev);
|
||||
if (ret) {
|
||||
dev_err(&led->client->dev, "led register err: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
led->led_dev.dev->of_node = to_of_node(child);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int lm3692x_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct lm3692x_led *led;
|
||||
int ret;
|
||||
|
||||
led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
|
||||
if (!led)
|
||||
return -ENOMEM;
|
||||
|
||||
mutex_init(&led->lock);
|
||||
led->client = client;
|
||||
led->led_dev.brightness_set_blocking = lm3692x_brightness_set;
|
||||
led->model_id = id->driver_data;
|
||||
i2c_set_clientdata(client, led);
|
||||
|
||||
led->regmap = devm_regmap_init_i2c(client, &lm3692x_regmap_config);
|
||||
if (IS_ERR(led->regmap)) {
|
||||
ret = PTR_ERR(led->regmap);
|
||||
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = lm3692x_probe_dt(led);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = lm3692x_init(led);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -341,6 +417,12 @@ static int lm3692x_remove(struct i2c_client *client)
|
|||
struct lm3692x_led *led = i2c_get_clientdata(client);
|
||||
int ret;
|
||||
|
||||
ret = regmap_update_bits(led->regmap, LM3692X_EN, LM3692X_DEVICE_EN, 0);
|
||||
if (ret) {
|
||||
dev_err(&led->client->dev, "Failed to disable regulator\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (led->enable_gpio)
|
||||
gpiod_direction_output(led->enable_gpio, 0);
|
||||
|
||||
|
@ -357,8 +439,8 @@ static int lm3692x_remove(struct i2c_client *client)
|
|||
}
|
||||
|
||||
static const struct i2c_device_id lm3692x_id[] = {
|
||||
{ "lm36922", 0 },
|
||||
{ "lm36923", 1 },
|
||||
{ "lm36922", LM36922_MODEL },
|
||||
{ "lm36923", LM36923_MODEL },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, lm3692x_id);
|
||||
|
|
Loading…
Reference in New Issue