OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

usb: musb: dsps: use musb register read/write wrappers instead 

musb core already exports the register read/write wrappers, so clean up
the duplication in dsps glue.

Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Bin Liu 2016-06-30 12:12:23 -05:00 committed by Greg Kroah-Hartman
parent b99d3659b3
commit 086b288282
1 changed files with 44 additions and 68 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

112
drivers/usb/musb/musb_dsps.c
View File

@ -51,30 +51,6 @@
static const struct of_device_id musb_dsps_of_match[];
/**
* avoid using musb_readx()/musb_writex() as glue layer should not be
* dependent on musb core layer symbols.
*/
static inline u8 dsps_readb(const void __iomem *addr, unsigned offset)
{
return __raw_readb(addr + offset);
}
static inline u32 dsps_readl(const void __iomem *addr, unsigned offset)
{
return __raw_readl(addr + offset);
}
static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data)
{
__raw_writeb(data, addr + offset);
}
static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data)
{
__raw_writel(data, addr + offset);
}
/**
* DSPS musb wrapper register offset.
* FIXME: This should be expanded to have all the wrapper registers from TI DSPS
@ -223,8 +199,8 @@ static void dsps_musb_enable(struct musb *musb)
((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
dsps_writel(reg_base, wrp->epintr_set, epmask);
dsps_writel(reg_base, wrp->coreintr_set, coremask);
musb_writel(reg_base, wrp->epintr_set, epmask);
musb_writel(reg_base, wrp->coreintr_set, coremask);
/* start polling for ID change in dual-role idle mode */
if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
@ -244,10 +220,10 @@ static void dsps_musb_disable(struct musb *musb)
const struct dsps_musb_wrapper *wrp = glue->wrp;
void __iomem *reg_base = musb->ctrl_base;
dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
dsps_writel(reg_base, wrp->epintr_clear,
musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
musb_writel(reg_base, wrp->epintr_clear,
wrp->txep_bitmap | wrp->rxep_bitmap);
dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
}
static void otg_timer(unsigned long _musb)
@ -265,14 +241,14 @@ static void otg_timer(unsigned long _musb)
* We poll because DSPS IP's won't expose several OTG-critical
* status change events (from the transceiver) otherwise.
*/
devctl = dsps_readb(mregs, MUSB_DEVCTL);
devctl = musb_readb(mregs, MUSB_DEVCTL);
dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
usb_otg_state_string(musb->xceiv->otg->state));
spin_lock_irqsave(&musb->lock, flags);
switch (musb->xceiv->otg->state) {
case OTG_STATE_A_WAIT_BCON:
dsps_writeb(musb->mregs, MUSB_DEVCTL, 0);
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
skip_session = 1;
/* fall */
@ -286,13 +262,13 @@ static void otg_timer(unsigned long _musb)
MUSB_HST_MODE(musb);
}
if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
musb_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
mod_timer(&glue->timer, jiffies +
msecs_to_jiffies(wrp->poll_timeout));
break;
case OTG_STATE_A_WAIT_VFALL:
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
dsps_writel(musb->ctrl_base, wrp->coreintr_set,
musb_writel(musb->ctrl_base, wrp->coreintr_set,
MUSB_INTR_VBUSERROR << wrp->usb_shift);
break;
default:
@ -315,29 +291,29 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
spin_lock_irqsave(&musb->lock, flags);
/* Get endpoint interrupts */
epintr = dsps_readl(reg_base, wrp->epintr_status);
epintr = musb_readl(reg_base, wrp->epintr_status);
musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
if (epintr)
dsps_writel(reg_base, wrp->epintr_status, epintr);
musb_writel(reg_base, wrp->epintr_status, epintr);
/* Get usb core interrupts */
usbintr = dsps_readl(reg_base, wrp->coreintr_status);
usbintr = musb_readl(reg_base, wrp->coreintr_status);
if (!usbintr && !epintr)
goto out;
musb->int_usb = (usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
if (usbintr)
dsps_writel(reg_base, wrp->coreintr_status, usbintr);
musb_writel(reg_base, wrp->coreintr_status, usbintr);
dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
usbintr, epintr);
if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
int drvvbus = dsps_readl(reg_base, wrp->status);
int drvvbus = musb_readl(reg_base, wrp->status);
void __iomem *mregs = musb->mregs;
u8 devctl = dsps_readb(mregs, MUSB_DEVCTL);
u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
int err;
err = musb->int_usb & MUSB_INTR_VBUSERROR;
@ -442,7 +418,7 @@ static int dsps_musb_init(struct musb *musb)
musb->phy = devm_phy_get(dev->parent, "usb2-phy");
/* Returns zero if e.g. not clocked */
rev = dsps_readl(reg_base, wrp->revision);
rev = musb_readl(reg_base, wrp->revision);
if (!rev)
return -ENODEV;
@ -463,14 +439,14 @@ static int dsps_musb_init(struct musb *musb)
setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
/* Reset the musb */
dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
musb_writel(reg_base, wrp->control, (1 << wrp->reset));
musb->isr = dsps_interrupt;
/* reset the otgdisable bit, needed for host mode to work */
val = dsps_readl(reg_base, wrp->phy_utmi);
val = musb_readl(reg_base, wrp->phy_utmi);
val &= ~(1 << wrp->otg_disable);
dsps_writel(musb->ctrl_base, wrp->phy_utmi, val);
musb_writel(musb->ctrl_base, wrp->phy_utmi, val);
/*
* Check whether the dsps version has babble control enabled.
@ -478,11 +454,11 @@ static int dsps_musb_init(struct musb *musb)
* If MUSB_BABBLE_CTL returns 0x4 then we have the babble control
* logic enabled.
*/
val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
val = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
if (val & MUSB_BABBLE_RCV_DISABLE) {
glue->sw_babble_enabled = true;
val |= MUSB_BABBLE_SW_SESSION_CTRL;
dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
}
return dsps_musb_dbg_init(musb, glue);
@ -510,7 +486,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
void __iomem *ctrl_base = musb->ctrl_base;
u32 reg;
reg = dsps_readl(ctrl_base, wrp->mode);
reg = musb_readl(ctrl_base, wrp->mode);
switch (mode) {
case MUSB_HOST:
@ -523,8 +499,8 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
*/
reg |= (1 << wrp->iddig_mux);
dsps_writel(ctrl_base, wrp->mode, reg);
dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
musb_writel(ctrl_base, wrp->mode, reg);
musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
break;
case MUSB_PERIPHERAL:
reg |= (1 << wrp->iddig);
@ -536,10 +512,10 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
*/
reg |= (1 << wrp->iddig_mux);
dsps_writel(ctrl_base, wrp->mode, reg);
musb_writel(ctrl_base, wrp->mode, reg);
break;
case MUSB_OTG:
dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
break;
default:
dev_err(glue->dev, "unsupported mode %d\n", mode);
@ -554,7 +530,7 @@ static bool dsps_sw_babble_control(struct musb *musb)
u8 babble_ctl;
bool session_restart = false;
babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n",
babble_ctl);
/*
@ -571,14 +547,14 @@ static bool dsps_sw_babble_control(struct musb *musb)
* babble is due to noise, then set transmit idle (d7 bit)
* to resume normal operation
*/
babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE;
dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
musb_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
/* wait till line monitor flag cleared */
dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n");
do {
babble_ctl = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
udelay(1);
} while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--);
@ -896,13 +872,13 @@ static int dsps_suspend(struct device *dev)
return 0;
mbase = musb->ctrl_base;
glue->context.control = dsps_readl(mbase, wrp->control);
glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
glue->context.phy_utmi = dsps_readl(mbase, wrp->phy_utmi);
glue->context.mode = dsps_readl(mbase, wrp->mode);
glue->context.tx_mode = dsps_readl(mbase, wrp->tx_mode);
glue->context.rx_mode = dsps_readl(mbase, wrp->rx_mode);
glue->context.control = musb_readl(mbase, wrp->control);
glue->context.epintr = musb_readl(mbase, wrp->epintr_set);
glue->context.coreintr = musb_readl(mbase, wrp->coreintr_set);
glue->context.phy_utmi = musb_readl(mbase, wrp->phy_utmi);
glue->context.mode = musb_readl(mbase, wrp->mode);
glue->context.tx_mode = musb_readl(mbase, wrp->tx_mode);
glue->context.rx_mode = musb_readl(mbase, wrp->rx_mode);
return 0;
}
@ -918,13 +894,13 @@ static int dsps_resume(struct device *dev)
return 0;
mbase = musb->ctrl_base;
dsps_writel(mbase, wrp->control, glue->context.control);
dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
dsps_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
dsps_writel(mbase, wrp->mode, glue->context.mode);
dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
musb_writel(mbase, wrp->control, glue->context.control);
musb_writel(mbase, wrp->epintr_set, glue->context.epintr);
musb_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
musb_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
musb_writel(mbase, wrp->mode, glue->context.mode);
musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
mod_timer(&glue->timer, jiffies +