forcedeth: fix vlans

For some reason, when rxaccel is disabled, NV_RX3_VLAN_TAG_PRESENT is
still set and some pseudorandom vids appear. So check for
NETIF_F_HW_VLAN_RX as well. Also set correctly hw_features and set vlan
mode on probe.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Jiri Pirko 2011-07-26 10:19:28 +00:00 committed by David S. Miller
parent b852b72087
commit 0891b0e089
1 changed files with 13 additions and 3 deletions

View File

@ -2764,7 +2764,14 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
prefetch(skb->data);
vlanflags = le32_to_cpu(np->get_rx.ex->buflow);
if (vlanflags & NV_RX3_VLAN_TAG_PRESENT) {
/*
* There's need to check for NETIF_F_HW_VLAN_RX here.
* Even if vlan rx accel is disabled,
* NV_RX3_VLAN_TAG_PRESENT is pseudo randomly set.
*/
if (dev->features & NETIF_F_HW_VLAN_RX &&
vlanflags & NV_RX3_VLAN_TAG_PRESENT) {
u16 vid = vlanflags & NV_RX3_VLAN_TAG_MASK;
__vlan_hwaccel_put_tag(skb, vid);
@ -5331,15 +5338,16 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG |
NETIF_F_TSO | NETIF_F_RXCSUM;
dev->features |= dev->hw_features;
}
np->vlanctl_bits = 0;
if (id->driver_data & DEV_HAS_VLAN) {
np->vlanctl_bits = NVREG_VLANCONTROL_ENABLE;
dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
dev->hw_features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
}
dev->features |= dev->hw_features;
np->pause_flags = NV_PAUSEFRAME_RX_CAPABLE | NV_PAUSEFRAME_RX_REQ | NV_PAUSEFRAME_AUTONEG;
if ((id->driver_data & DEV_HAS_PAUSEFRAME_TX_V1) ||
(id->driver_data & DEV_HAS_PAUSEFRAME_TX_V2) ||
@ -5607,6 +5615,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
goto out_error;
}
nv_vlan_mode(dev, dev->features);
netif_carrier_off(dev);
dev_info(&pci_dev->dev, "ifname %s, PHY OUI 0x%x @ %d, addr %pM\n",