diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 3c8863f26c7e..ec52e3a399f3 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -384,6 +384,20 @@ config SENSORS_W83627HF This driver can also be built as a module. If so, the module will be called w83627hf. +config SENSORS_W83627EHF + tristate "Winbond W83627EHF" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + select I2C_ISA + help + If you say yes here you get preliminary support for the hardware + monitoring functionality of the Winbond W83627EHF Super-I/O chip. + Only fan and temperature inputs are supported at the moment, while + the chip does much more than that. + + This driver can also be built as a module. If so, the module + will be called w83627ehf. + endmenu menu "Other I2C Chip support" diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 247fc982a6d2..2281435fc4c3 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o +obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o diff --git a/drivers/i2c/chips/w83627ehf.c b/drivers/i2c/chips/w83627ehf.c new file mode 100644 index 000000000000..7bb693d29784 --- /dev/null +++ b/drivers/i2c/chips/w83627ehf.c @@ -0,0 +1,839 @@ +/* + w83627ehf - Driver for the hardware monitoring functionality of + the Winbond W83627EHF Super-I/O chip + Copyright (C) 2005 Jean Delvare + + Shamelessly ripped from the w83627hf driver + Copyright (C) 2003 Mark Studebaker + + Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help + in testing and debugging this driver. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + + Supports the following chips: + + Chip #vin #fan #pwm #temp chip_id man_id + w83627ehf - 5 - 3 0x88 0x5ca3 + + This is a preliminary version of the driver, only supporting the + fan and temperature inputs. The chip does much more than that. +*/ + +#include +#include +#include +#include +#include +#include +#include "lm75.h" + +/* Addresses to scan + The actual ISA address is read from Super-I/O configuration space */ +static unsigned short normal_i2c[] = { I2C_CLIENT_END }; +static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_1(w83627ehf); + +/* + * Super-I/O constants and functions + */ + +static int REG; /* The register to read/write */ +static int VAL; /* The value to read/write */ + +#define W83627EHF_LD_HWM 0x0b + +#define SIO_REG_LDSEL 0x07 /* Logical device select */ +#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ +#define SIO_REG_ENABLE 0x30 /* Logical device enable */ +#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ + +#define SIO_W83627EHF_ID 0x8840 +#define SIO_ID_MASK 0xFFC0 + +static inline void +superio_outb(int reg, int val) +{ + outb(reg, REG); + outb(val, VAL); +} + +static inline int +superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +static inline void +superio_select(int ld) +{ + outb(SIO_REG_LDSEL, REG); + outb(ld, VAL); +} + +static inline void +superio_enter(void) +{ + outb(0x87, REG); + outb(0x87, REG); +} + +static inline void +superio_exit(void) +{ + outb(0x02, REG); + outb(0x02, VAL); +} + +/* + * ISA constants + */ + +#define REGION_LENGTH 8 +#define ADDR_REG_OFFSET 5 +#define DATA_REG_OFFSET 6 + +#define W83627EHF_REG_BANK 0x4E +#define W83627EHF_REG_CONFIG 0x40 +#define W83627EHF_REG_CHIP_ID 0x49 +#define W83627EHF_REG_MAN_ID 0x4F + +static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 }; +static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c }; + +#define W83627EHF_REG_TEMP1 0x27 +#define W83627EHF_REG_TEMP1_HYST 0x3a +#define W83627EHF_REG_TEMP1_OVER 0x39 +static const u16 W83627EHF_REG_TEMP[] = { 0x150, 0x250 }; +static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x153, 0x253 }; +static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x155, 0x255 }; +static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0x152, 0x252 }; + +/* Fan clock dividers are spread over the following five registers */ +#define W83627EHF_REG_FANDIV1 0x47 +#define W83627EHF_REG_FANDIV2 0x4B +#define W83627EHF_REG_VBAT 0x5D +#define W83627EHF_REG_DIODE 0x59 +#define W83627EHF_REG_SMI_OVT 0x4C + +/* + * Conversions + */ + +static inline unsigned int +fan_from_reg(u8 reg, unsigned int div) +{ + if (reg == 0 || reg == 255) + return 0; + return 1350000U / (reg * div); +} + +static inline unsigned int +div_from_reg(u8 reg) +{ + return 1 << reg; +} + +static inline int +temp1_from_reg(s8 reg) +{ + return reg * 1000; +} + +static inline s8 +temp1_to_reg(int temp) +{ + if (temp <= -128000) + return -128; + if (temp >= 127000) + return 127; + if (temp < 0) + return (temp - 500) / 1000; + return (temp + 500) / 1000; +} + +/* + * Data structures and manipulation thereof + */ + +struct w83627ehf_data { + struct i2c_client client; + struct semaphore lock; + + struct semaphore update_lock; + char valid; /* !=0 if following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + /* Register values */ + u8 fan[5]; + u8 fan_min[5]; + u8 fan_div[5]; + u8 has_fan; /* some fan inputs can be disabled */ + s8 temp1; + s8 temp1_max; + s8 temp1_max_hyst; + s16 temp[2]; + s16 temp_max[2]; + s16 temp_max_hyst[2]; +}; + +static inline int is_word_sized(u16 reg) +{ + return (((reg & 0xff00) == 0x100 + || (reg & 0xff00) == 0x200) + && ((reg & 0x00ff) == 0x50 + || (reg & 0x00ff) == 0x53 + || (reg & 0x00ff) == 0x55)); +} + +/* We assume that the default bank is 0, thus the following two functions do + nothing for registers which live in bank 0. For others, they respectively + set the bank register to the correct value (before the register is + accessed), and back to 0 (afterwards). */ +static inline void w83627ehf_set_bank(struct i2c_client *client, u16 reg) +{ + if (reg & 0xff00) { + outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET); + outb_p(reg >> 8, client->addr + DATA_REG_OFFSET); + } +} + +static inline void w83627ehf_reset_bank(struct i2c_client *client, u16 reg) +{ + if (reg & 0xff00) { + outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET); + outb_p(0, client->addr + DATA_REG_OFFSET); + } +} + +static u16 w83627ehf_read_value(struct i2c_client *client, u16 reg) +{ + struct w83627ehf_data *data = i2c_get_clientdata(client); + int res, word_sized = is_word_sized(reg); + + down(&data->lock); + + w83627ehf_set_bank(client, reg); + outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET); + res = inb_p(client->addr + DATA_REG_OFFSET); + if (word_sized) { + outb_p((reg & 0xff) + 1, + client->addr + ADDR_REG_OFFSET); + res = (res << 8) + inb_p(client->addr + DATA_REG_OFFSET); + } + w83627ehf_reset_bank(client, reg); + + up(&data->lock); + + return res; +} + +static int w83627ehf_write_value(struct i2c_client *client, u16 reg, u16 value) +{ + struct w83627ehf_data *data = i2c_get_clientdata(client); + int word_sized = is_word_sized(reg); + + down(&data->lock); + + w83627ehf_set_bank(client, reg); + outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET); + if (word_sized) { + outb_p(value >> 8, client->addr + DATA_REG_OFFSET); + outb_p((reg & 0xff) + 1, + client->addr + ADDR_REG_OFFSET); + } + outb_p(value & 0xff, client->addr + DATA_REG_OFFSET); + w83627ehf_reset_bank(client, reg); + + up(&data->lock); + return 0; +} + +/* This function assumes that the caller holds data->update_lock */ +static void w83627ehf_write_fan_div(struct i2c_client *client, int nr) +{ + struct w83627ehf_data *data = i2c_get_clientdata(client); + u8 reg; + + switch (nr) { + case 0: + reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf) + | ((data->fan_div[0] & 0x03) << 4); + w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg); + reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf) + | ((data->fan_div[0] & 0x04) << 3); + w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg); + break; + case 1: + reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f) + | ((data->fan_div[1] & 0x03) << 6); + w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg); + reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf) + | ((data->fan_div[1] & 0x04) << 4); + w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg); + break; + case 2: + reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV2) & 0x3f) + | ((data->fan_div[2] & 0x03) << 6); + w83627ehf_write_value(client, W83627EHF_REG_FANDIV2, reg); + reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0x7f) + | ((data->fan_div[2] & 0x04) << 5); + w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg); + break; + case 3: + reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0xfc) + | (data->fan_div[3] & 0x03); + w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg); + reg = (w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT) & 0x7f) + | ((data->fan_div[3] & 0x04) << 5); + w83627ehf_write_value(client, W83627EHF_REG_SMI_OVT, reg); + break; + case 4: + reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0x73) + | ((data->fan_div[4] & 0x03) << 3) + | ((data->fan_div[4] & 0x04) << 5); + w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg); + break; + } +} + +static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) + || !data->valid) { + /* Fan clock dividers */ + i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1); + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = (i >> 6) & 0x03; + i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV2); + data->fan_div[2] = (i >> 6) & 0x03; + i = w83627ehf_read_value(client, W83627EHF_REG_VBAT); + data->fan_div[0] |= (i >> 3) & 0x04; + data->fan_div[1] |= (i >> 4) & 0x04; + data->fan_div[2] |= (i >> 5) & 0x04; + if (data->has_fan & ((1 << 3) | (1 << 4))) { + i = w83627ehf_read_value(client, W83627EHF_REG_DIODE); + data->fan_div[3] = i & 0x03; + data->fan_div[4] = ((i >> 2) & 0x03) + | ((i >> 5) & 0x04); + } + if (data->has_fan & (1 << 3)) { + i = w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT); + data->fan_div[3] |= (i >> 5) & 0x04; + } + + /* Measured fan speeds and limits */ + for (i = 0; i < 5; i++) { + if (!(data->has_fan & (1 << i))) + continue; + + data->fan[i] = w83627ehf_read_value(client, + W83627EHF_REG_FAN[i]); + data->fan_min[i] = w83627ehf_read_value(client, + W83627EHF_REG_FAN_MIN[i]); + + /* If we failed to measure the fan speed and clock + divider can be increased, let's try that for next + time */ + if (data->fan[i] == 0xff + && data->fan_div[i] < 0x07) { + dev_dbg(&client->dev, "Increasing fan %d " + "clock divider from %u to %u\n", + i, div_from_reg(data->fan_div[i]), + div_from_reg(data->fan_div[i] + 1)); + data->fan_div[i]++; + w83627ehf_write_fan_div(client, i); + /* Preserve min limit if possible */ + if (data->fan_min[i] >= 2 + && data->fan_min[i] != 255) + w83627ehf_write_value(client, + W83627EHF_REG_FAN_MIN[i], + (data->fan_min[i] /= 2)); + } + } + + /* Measured temperatures and limits */ + data->temp1 = w83627ehf_read_value(client, + W83627EHF_REG_TEMP1); + data->temp1_max = w83627ehf_read_value(client, + W83627EHF_REG_TEMP1_OVER); + data->temp1_max_hyst = w83627ehf_read_value(client, + W83627EHF_REG_TEMP1_HYST); + for (i = 0; i < 2; i++) { + data->temp[i] = w83627ehf_read_value(client, + W83627EHF_REG_TEMP[i]); + data->temp_max[i] = w83627ehf_read_value(client, + W83627EHF_REG_TEMP_OVER[i]); + data->temp_max_hyst[i] = w83627ehf_read_value(client, + W83627EHF_REG_TEMP_HYST[i]); + } + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + return data; +} + +/* + * Sysfs callback functions + */ + +#define show_fan_reg(reg) \ +static ssize_t \ +show_##reg(struct device *dev, char *buf, int nr) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + return sprintf(buf, "%d\n", \ + fan_from_reg(data->reg[nr], \ + div_from_reg(data->fan_div[nr]))); \ +} +show_fan_reg(fan); +show_fan_reg(fan_min); + +static ssize_t +show_fan_div(struct device *dev, char *buf, int nr) +{ + struct w83627ehf_data *data = w83627ehf_update_device(dev); + return sprintf(buf, "%u\n", + div_from_reg(data->fan_div[nr])); +} + +static ssize_t +store_fan_min(struct device *dev, const char *buf, size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct w83627ehf_data *data = i2c_get_clientdata(client); + unsigned int val = simple_strtoul(buf, NULL, 10); + unsigned int reg; + u8 new_div; + + down(&data->update_lock); + if (!val) { + /* No min limit, alarm disabled */ + data->fan_min[nr] = 255; + new_div = data->fan_div[nr]; /* No change */ + dev_info(dev, "fan%u low limit and alarm disabled\n", nr + 1); + } else if ((reg = 1350000U / val) >= 128 * 255) { + /* Speed below this value cannot possibly be represented, + even with the highest divider (128) */ + data->fan_min[nr] = 254; + new_div = 7; /* 128 == (1 << 7) */ + dev_warn(dev, "fan%u low limit %u below minimum %u, set to " + "minimum\n", nr + 1, val, fan_from_reg(254, 128)); + } else if (!reg) { + /* Speed above this value cannot possibly be represented, + even with the lowest divider (1) */ + data->fan_min[nr] = 1; + new_div = 0; /* 1 == (1 << 0) */ + dev_warn(dev, "fan%u low limit %u above maximum %u, set to " + "maximum\n", nr + 1, val, fan_from_reg(1, 0)); + } else { + /* Automatically pick the best divider, i.e. the one such + that the min limit will correspond to a register value + in the 96..192 range */ + new_div = 0; + while (reg > 192 && new_div < 7) { + reg >>= 1; + new_div++; + } + data->fan_min[nr] = reg; + } + + /* Write both the fan clock divider (if it changed) and the new + fan min (unconditionally) */ + if (new_div != data->fan_div[nr]) { + if (new_div > data->fan_div[nr]) + data->fan[nr] >>= (data->fan_div[nr] - new_div); + else + data->fan[nr] <<= (new_div - data->fan_div[nr]); + + dev_dbg(dev, "fan%u clock divider changed from %u to %u\n", + nr + 1, div_from_reg(data->fan_div[nr]), + div_from_reg(new_div)); + data->fan_div[nr] = new_div; + w83627ehf_write_fan_div(client, nr); + } + w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr], + data->fan_min[nr]); + up(&data->update_lock); + + return count; +} + +#define sysfs_fan_offset(offset) \ +static ssize_t \ +show_reg_fan_##offset(struct device *dev, char *buf) \ +{ \ + return show_fan(dev, buf, offset-1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_reg_fan_##offset, NULL); + +#define sysfs_fan_min_offset(offset) \ +static ssize_t \ +show_reg_fan##offset##_min(struct device *dev, char *buf) \ +{ \ + return show_fan_min(dev, buf, offset-1); \ +} \ +static ssize_t \ +store_reg_fan##offset##_min(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + return store_fan_min(dev, buf, count, offset-1); \ +} \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_reg_fan##offset##_min, \ + store_reg_fan##offset##_min); + +#define sysfs_fan_div_offset(offset) \ +static ssize_t \ +show_reg_fan##offset##_div(struct device *dev, char *buf) \ +{ \ + return show_fan_div(dev, buf, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ + show_reg_fan##offset##_div, NULL); + +sysfs_fan_offset(1); +sysfs_fan_min_offset(1); +sysfs_fan_div_offset(1); +sysfs_fan_offset(2); +sysfs_fan_min_offset(2); +sysfs_fan_div_offset(2); +sysfs_fan_offset(3); +sysfs_fan_min_offset(3); +sysfs_fan_div_offset(3); +sysfs_fan_offset(4); +sysfs_fan_min_offset(4); +sysfs_fan_div_offset(4); +sysfs_fan_offset(5); +sysfs_fan_min_offset(5); +sysfs_fan_div_offset(5); + +#define show_temp1_reg(reg) \ +static ssize_t \ +show_##reg(struct device *dev, char *buf) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + return sprintf(buf, "%d\n", temp1_from_reg(data->reg)); \ +} +show_temp1_reg(temp1); +show_temp1_reg(temp1_max); +show_temp1_reg(temp1_max_hyst); + +#define store_temp1_reg(REG, reg) \ +static ssize_t \ +store_temp1_##reg(struct device *dev, const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83627ehf_data *data = i2c_get_clientdata(client); \ + u32 val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->temp1_##reg = temp1_to_reg(val); \ + w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \ + data->temp1_##reg); \ + up(&data->update_lock); \ + return count; \ +} +store_temp1_reg(OVER, max); +store_temp1_reg(HYST, max_hyst); + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL); +static DEVICE_ATTR(temp1_max, S_IRUGO| S_IWUSR, + show_temp1_max, store_temp1_max); +static DEVICE_ATTR(temp1_max_hyst, S_IRUGO| S_IWUSR, + show_temp1_max_hyst, store_temp1_max_hyst); + +#define show_temp_reg(reg) \ +static ssize_t \ +show_##reg (struct device *dev, char *buf, int nr) \ +{ \ + struct w83627ehf_data *data = w83627ehf_update_device(dev); \ + return sprintf(buf, "%d\n", \ + LM75_TEMP_FROM_REG(data->reg[nr])); \ +} +show_temp_reg(temp); +show_temp_reg(temp_max); +show_temp_reg(temp_max_hyst); + +#define store_temp_reg(REG, reg) \ +static ssize_t \ +store_##reg (struct device *dev, const char *buf, size_t count, int nr) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct w83627ehf_data *data = i2c_get_clientdata(client); \ + u32 val = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->reg[nr] = LM75_TEMP_TO_REG(val); \ + w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \ + data->reg[nr]); \ + up(&data->update_lock); \ + return count; \ +} +store_temp_reg(OVER, temp_max); +store_temp_reg(HYST, temp_max_hyst); + +#define sysfs_temp_offset(offset) \ +static ssize_t \ +show_reg_temp##offset (struct device *dev, char *buf) \ +{ \ + return show_temp(dev, buf, offset - 2); \ +} \ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_reg_temp##offset, NULL); + +#define sysfs_temp_reg_offset(reg, offset) \ +static ssize_t \ +show_reg_temp##offset##_##reg(struct device *dev, char *buf) \ +{ \ + return show_temp_##reg(dev, buf, offset - 2); \ +} \ +static ssize_t \ +store_reg_temp##offset##_##reg(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + return store_temp_##reg(dev, buf, count, offset - 2); \ +} \ +static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \ + show_reg_temp##offset##_##reg, \ + store_reg_temp##offset##_##reg); + +sysfs_temp_offset(2); +sysfs_temp_reg_offset(max, 2); +sysfs_temp_reg_offset(max_hyst, 2); +sysfs_temp_offset(3); +sysfs_temp_reg_offset(max, 3); +sysfs_temp_reg_offset(max_hyst, 3); + +/* + * Driver and client management + */ + +static struct i2c_driver w83627ehf_driver; + +static void w83627ehf_init_client(struct i2c_client *client) +{ + int i; + u8 tmp; + + /* Start monitoring is needed */ + tmp = w83627ehf_read_value(client, W83627EHF_REG_CONFIG); + if (!(tmp & 0x01)) + w83627ehf_write_value(client, W83627EHF_REG_CONFIG, + tmp | 0x01); + + /* Enable temp2 and temp3 if needed */ + for (i = 0; i < 2; i++) { + tmp = w83627ehf_read_value(client, + W83627EHF_REG_TEMP_CONFIG[i]); + if (tmp & 0x01) + w83627ehf_write_value(client, + W83627EHF_REG_TEMP_CONFIG[i], + tmp & 0xfe); + } +} + +static int w83627ehf_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct w83627ehf_data *data; + int i, err = 0; + + if (!i2c_is_isa_adapter(adapter)) + return 0; + + if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) { + err = -EBUSY; + goto exit; + } + + if (!(data = kmalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit_release; + } + memset(data, 0, sizeof(struct w83627ehf_data)); + + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + init_MUTEX(&data->lock); + client->adapter = adapter; + client->driver = &w83627ehf_driver; + client->flags = 0; + + strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the i2c layer a new client has arrived */ + if ((err = i2c_attach_client(client))) + goto exit_free; + + /* Initialize the chip */ + w83627ehf_init_client(client); + + /* A few vars need to be filled upon startup */ + for (i = 0; i < 5; i++) + data->fan_min[i] = w83627ehf_read_value(client, + W83627EHF_REG_FAN_MIN[i]); + + /* It looks like fan4 and fan5 pins can be alternatively used + as fan on/off switches */ + data->has_fan = 0x07; /* fan1, fan2 and fan3 */ + i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1); + if (i & (1 << 2)) + data->has_fan |= (1 << 3); + if (i & (1 << 0)) + data->has_fan |= (1 << 4); + + /* Register sysfs hooks */ + device_create_file(&client->dev, &dev_attr_fan1_input); + device_create_file(&client->dev, &dev_attr_fan1_min); + device_create_file(&client->dev, &dev_attr_fan1_div); + device_create_file(&client->dev, &dev_attr_fan2_input); + device_create_file(&client->dev, &dev_attr_fan2_min); + device_create_file(&client->dev, &dev_attr_fan2_div); + device_create_file(&client->dev, &dev_attr_fan3_input); + device_create_file(&client->dev, &dev_attr_fan3_min); + device_create_file(&client->dev, &dev_attr_fan3_div); + + if (data->has_fan & (1 << 3)) { + device_create_file(&client->dev, &dev_attr_fan4_input); + device_create_file(&client->dev, &dev_attr_fan4_min); + device_create_file(&client->dev, &dev_attr_fan4_div); + } + if (data->has_fan & (1 << 4)) { + device_create_file(&client->dev, &dev_attr_fan5_input); + device_create_file(&client->dev, &dev_attr_fan5_min); + device_create_file(&client->dev, &dev_attr_fan5_div); + } + + device_create_file(&client->dev, &dev_attr_temp1_input); + device_create_file(&client->dev, &dev_attr_temp1_max); + device_create_file(&client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&client->dev, &dev_attr_temp2_input); + device_create_file(&client->dev, &dev_attr_temp2_max); + device_create_file(&client->dev, &dev_attr_temp2_max_hyst); + device_create_file(&client->dev, &dev_attr_temp3_input); + device_create_file(&client->dev, &dev_attr_temp3_max); + device_create_file(&client->dev, &dev_attr_temp3_max_hyst); + + return 0; + +exit_free: + kfree(data); +exit_release: + release_region(address, REGION_LENGTH); +exit: + return err; +} + +static int w83627ehf_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, w83627ehf_detect); +} + +static int w83627ehf_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + release_region(client->addr, REGION_LENGTH); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static struct i2c_driver w83627ehf_driver = { + .owner = THIS_MODULE, + .name = "w83627ehf", + .flags = I2C_DF_NOTIFY, + .attach_adapter = w83627ehf_attach_adapter, + .detach_client = w83627ehf_detach_client, +}; + +static int __init w83627ehf_find(int sioaddr, int *address) +{ + u16 val; + + REG = sioaddr; + VAL = sioaddr + 1; + superio_enter(); + + val = (superio_inb(SIO_REG_DEVID) << 8) + | superio_inb(SIO_REG_DEVID + 1); + if ((val & SIO_ID_MASK) != SIO_W83627EHF_ID) { + superio_exit(); + return -ENODEV; + } + + superio_select(W83627EHF_LD_HWM); + val = (superio_inb(SIO_REG_ADDR) << 8) + | superio_inb(SIO_REG_ADDR + 1); + *address = val & ~(REGION_LENGTH - 1); + if (*address == 0) { + superio_exit(); + return -ENODEV; + } + + /* Activate logical device if needed */ + val = superio_inb(SIO_REG_ENABLE); + if (!(val & 0x01)) + superio_outb(SIO_REG_ENABLE, val | 0x01); + + superio_exit(); + return 0; +} + +static int __init sensors_w83627ehf_init(void) +{ + if (w83627ehf_find(0x2e, &normal_isa[0]) + && w83627ehf_find(0x4e, &normal_isa[0])) + return -ENODEV; + + return i2c_add_driver(&w83627ehf_driver); +} + +static void __exit sensors_w83627ehf_exit(void) +{ + i2c_del_driver(&w83627ehf_driver); +} + +MODULE_AUTHOR("Jean Delvare "); +MODULE_DESCRIPTION("W83627EHF driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_w83627ehf_init); +module_exit(sensors_w83627ehf_exit);