OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Revert "USB: pl2303: distinguish between original and cloned HX chips" 

This reverts commit 7d26a78f62.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.

Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Greg Kroah-Hartman 2013-11-01 09:12:52 -07:00
parent 959f58544b
commit 09169197c9
1 changed files with 11 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
drivers/usb/serial/pl2303.c
View File

@ -139,7 +139,6 @@ enum pl2303_type {
HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */
HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */
TB, /* TB version */
HX_CLONE, /* Cheap and less functional clone of the HX chip */
};
/*
* NOTE: don't know the difference between type 0 and type 1,
@ -207,23 +206,8 @@ static int pl2303_startup(struct usb_serial *serial)
* the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB
*/
if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) {
/* Check if the device is a clone */
pl2303_vendor_read(0x9494, 0, serial, buf);
/*
* NOTE: Not sure if this read is really needed.
* The HX returns 0x00, the clone 0x02, but the Windows
* driver seems to ignore the value and continues.
*/
pl2303_vendor_write(0x0606, 0xaa, serial);
pl2303_vendor_read(0x8686, 0, serial, buf);
if (buf[0] != 0xaa) {
type = HX_CLONE;
type_str = "X/HX clone (limited functionality)";
} else {
type = HX_TA;
type_str = "X/HX/TA";
}
pl2303_vendor_write(0x0606, 0x00, serial);
} else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
== 0x400) {
type = HXD_EA_RA_SA;
@ -321,9 +305,8 @@ static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
{
/*
* NOTE: Only the values defined in baud_sup are supported !
* => if unsupported values are set, the PL2303 uses 9600 baud instead
* => HX clones just don't work at unsupported baud rates < 115200 baud,
* for baud rates > 115200 they run at 115200 baud
* => if unsupported values are set, the PL2303 seems to
* use 9600 baud (at least my PL2303X always does)
*/
const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
4800, 7200, 9600, 14400, 19200, 28800, 38400,
@ -333,14 +316,14 @@ static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
* NOTE: With the exception of type_0/1 devices, the following
* additional baud rates are supported (tested with HX rev. 3A only):
* 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800,
* 403200, 806400. (*: not HX and HX clones)
* 403200, 806400. (*: not HX)
*
* Maximum values: HXD, TB: 12000000; HX, TA: 6000000;
* type_0+1: 1228800; RA: 921600; HX clones, SA: 115200
* type_0+1: 1228800; RA: 921600; SA: 115200
*
* As long as we are not using this encoding method for anything else
* than the type_0+1, HX and HX clone chips, there is no point in
* complicating the code to support them.
* than the type_0+1 and HX chips, there is no point in complicating
* the code to support them.
*/
int i;
@ -364,8 +347,6 @@ static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
baud = min_t(int, baud, 6000000);
else if (type == type_0 || type == type_1)
baud = min_t(int, baud, 1228800);
else if (type == HX_CLONE)
baud = min_t(int, baud, 115200);
/* Direct (standard) baud rate encoding method */
put_unaligned_le32(baud, buf);
@ -378,8 +359,7 @@ static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type,
/*
* Divisor based baud rate encoding method
*
* NOTE: HX clones do NOT support this method.
* It's not clear if the type_0/1 chips support it.
* NOTE: it's not clear if the type_0/1 chips support this method
*
* divisor = 12MHz * 32 / baudrate = 2^A * B
*
@ -472,7 +452,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty,
* 1) Direct method: encodes the baud rate value directly
* => supported by all chip types
* 2) Divisor based method: encodes a divisor to a base value (12MHz*32)
* => not supported by HX clones (and likely type_0/1 chips)
* => supported by HX chips (and likely not by type_0/1 chips)
*
* NOTE: Although the divisor based baud rate encoding method is much
* more flexible, some of the standard baud rate values can not be
@ -480,7 +460,7 @@ static void pl2303_encode_baudrate(struct tty_struct *tty,
* the device likely uses the same baud rate generator for both methods
* so that there is likley no difference.
*/
if (type == type_0 || type == type_1 || type == HX_CLONE)
if (type == type_0 || type == type_1)
baud = pl2303_baudrate_encode_direct(baud, type, buf);
else
baud = pl2303_baudrate_encode_divisor(baud, type, buf);
@ -833,7 +813,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
/* NOTE: HX clones don't support sending breaks, -EPIPE is returned */
if (result)
dev_err(&port->dev, "error sending break = %d\n", result);
}