ARM: OMAP: Add OMAP chip type structure; clean up mach-omap2/id.c

Add a new OMAP chip identification interface, omap_chip_id.
omap_chip_id is a structure which contains one bit for each OMAP2/3
CPU type, and on 3430, ES level.  For example, the CHIP_IS_OMAP2420
bit is set in omap_chip at boot on an OMAP2420.  On OMAP3430ES2, both
CHIP_IS_OMAP3430 and CHIP_IS_OMAP3430ES2 bits are set.

omap_chip is set in mach-omap2/id.c by _set_omap_chip(). Other
code should use the omap_chip_is() function to test against omap_chip.

Also, clean up id.c by splitting some code out of
omap_check_revision() into its own function, _set_system_rev(); and
converting some debug printk()s into pr_debug().

Second revision.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Paul Walmsley 2008-07-03 12:24:45 +03:00 committed by Tony Lindgren
parent ff00fcc9ca
commit 097c584cd4
2 changed files with 205 additions and 29 deletions

View File

@ -17,16 +17,23 @@
#include <asm/io.h>
#if defined(CONFIG_ARCH_OMAP2420)
#define OMAP24XX_TAP_BASE io_p2v(0x48014000)
#endif
#include <asm/arch/control.h>
#include <asm/arch/cpu.h>
#if defined(CONFIG_ARCH_OMAP2430)
#define OMAP24XX_TAP_BASE io_p2v(0x4900A000)
#if defined(CONFIG_ARCH_OMAP2420)
#define TAP_BASE io_p2v(0x48014000)
#elif defined(CONFIG_ARCH_OMAP2430)
#define TAP_BASE io_p2v(0x4900A000)
#elif defined(CONFIG_ARCH_OMAP34XX)
#define TAP_BASE io_p2v(0x4830A000)
#endif
#define OMAP_TAP_IDCODE 0x0204
#if defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_TAP_PROD_ID 0x0210
#else
#define OMAP_TAP_PROD_ID 0x0208
#endif
#define OMAP_TAP_DIE_ID_0 0x0218
#define OMAP_TAP_DIE_ID_1 0x021C
@ -56,9 +63,134 @@ static struct omap_id omap_ids[] __initdata = {
{ .hawkeye = 0xb68a, .dev = 0x0, .type = 0x24300000 },
};
static struct omap_chip_id omap_chip;
/**
* omap_chip_is - test whether currently running OMAP matches a chip type
* @oc: omap_chip_t to test against
*
* Test whether the currently-running OMAP chip matches the supplied
* chip type 'oc'. Returns 1 upon a match; 0 upon failure.
*/
int omap_chip_is(struct omap_chip_id oci)
{
return (oci.oc & omap_chip.oc) ? 1 : 0;
}
EXPORT_SYMBOL(omap_chip_is);
static u32 __init read_tap_reg(int reg)
{
return __raw_readl(OMAP24XX_TAP_BASE + reg);
unsigned int regval = 0;
u32 cpuid;
/* Reading the IDCODE register on 3430 ES1 results in a
* data abort as the register is not exposed on the OCP
* Hence reading the Cortex Rev
*/
cpuid = read_cpuid(CPUID_ID);
/* If the processor type is Cortex-A8 and the revision is 0x0
* it means its Cortex r0p0 which is 3430 ES1
*/
if ((((cpuid >> 4) & 0xFFF) == 0xC08) && ((cpuid & 0xF) == 0x0)) {
switch (reg) {
case OMAP_TAP_IDCODE : regval = 0x0B7AE02F; break;
/* Making DevType as 0xF in ES1 to differ from ES2 */
case OMAP_TAP_PROD_ID : regval = 0x000F00F0; break;
case OMAP_TAP_DIE_ID_0: regval = 0x01000000; break;
case OMAP_TAP_DIE_ID_1: regval = 0x1012d687; break;
case OMAP_TAP_DIE_ID_2: regval = 0x00000000; break;
case OMAP_TAP_DIE_ID_3: regval = 0x2d2c0000; break;
}
} else
regval = __raw_readl(TAP_BASE + reg);
return regval;
}
/*
* _set_system_rev - set the system_rev global based on current OMAP chip type
*
* Set the system_rev global. This is primarily used by the cpu_is_omapxxxx()
* macros.
*/
static void __init _set_system_rev(u32 type, u8 rev)
{
u32 i, ctrl_status;
/*
* system_rev encoding is as follows
* system_rev & 0xff000000 -> Omap Class (24xx/34xx)
* system_rev & 0xfff00000 -> Omap Sub Class (242x/343x)
* system_rev & 0xffff0000 -> Omap type (2420/2422/2423/2430/3430)
* system_rev & 0x0000f000 -> Silicon revision (ES1, ES2 )
* system_rev & 0x00000700 -> Device Type ( EMU/HS/GP/BAD )
* system_rev & 0x000000c0 -> IDCODE revision[6:7]
* system_rev & 0x0000003f -> sys_boot[0:5]
*/
/* Embedding the ES revision info in type field */
system_rev = type;
/* Also add IDCODE revision info only two lower bits */
system_rev |= ((rev & 0x3) << 6);
/* Add in the device type and sys_boot fields (see above) */
if (cpu_is_omap24xx()) {
i = OMAP24XX_CONTROL_STATUS;
} else if (cpu_is_omap343x()) {
i = OMAP343X_CONTROL_STATUS;
} else {
printk(KERN_ERR "id: unknown CPU type\n");
BUG();
}
ctrl_status = omap_ctrl_readl(i);
system_rev |= (ctrl_status & (OMAP2_SYSBOOT_5_MASK |
OMAP2_SYSBOOT_4_MASK |
OMAP2_SYSBOOT_3_MASK |
OMAP2_SYSBOOT_2_MASK |
OMAP2_SYSBOOT_1_MASK |
OMAP2_SYSBOOT_0_MASK));
system_rev |= (ctrl_status & OMAP2_DEVICETYPE_MASK);
}
/*
* _set_omap_chip - set the omap_chip global based on OMAP chip type
*
* Build the omap_chip bits. This variable is used by powerdomain and
* clockdomain code to indicate whether structures are applicable for
* the current OMAP chip type by ANDing it against a 'platform' bitfield
* in the structure.
*/
static void __init _set_omap_chip(void)
{
if (cpu_is_omap343x()) {
omap_chip.oc = CHIP_IS_OMAP3430;
if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0))
omap_chip.oc |= CHIP_IS_OMAP3430ES1;
else if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0))
omap_chip.oc |= CHIP_IS_OMAP3430ES2;
} else if (cpu_is_omap243x()) {
/* Currently only supports 2430ES2.1 and 2430-all */
omap_chip.oc |= CHIP_IS_OMAP2430;
} else if (cpu_is_omap242x()) {
/* Currently only supports 2420ES2.1.1 and 2420-all */
omap_chip.oc |= CHIP_IS_OMAP2420;
} else {
/* Current CPU not supported by this code. */
printk(KERN_WARNING "OMAP chip type code does not yet support "
"this CPU type.\n");
WARN_ON(1);
}
}
void __init omap2_check_revision(void)
@ -76,21 +208,31 @@ void __init omap2_check_revision(void)
rev = (idcode >> 28) & 0x0f;
dev_type = (prod_id >> 16) & 0x0f;
#ifdef DEBUG
printk(KERN_DEBUG "OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
printk(KERN_DEBUG "OMAP_TAP_DIE_ID_0: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_0));
printk(KERN_DEBUG "OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
read_tap_reg(OMAP_TAP_DIE_ID_1),
(read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
printk(KERN_DEBUG "OMAP_TAP_DIE_ID_2: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_2));
printk(KERN_DEBUG "OMAP_TAP_DIE_ID_3: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_3));
printk(KERN_DEBUG "OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
prod_id, dev_type);
#endif
pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_0));
pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
read_tap_reg(OMAP_TAP_DIE_ID_1),
(read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_2));
pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n",
read_tap_reg(OMAP_TAP_DIE_ID_3));
pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
prod_id, dev_type);
/*
* Detection for 34xx ES2.0 and above can be done with just
* hawkeye and rev. See TRM 1.5.2 Device Identification.
* Note that rev cannot be used directly as ES1.0 uses value 0.
*/
if (hawkeye == 0xb7ae) {
system_rev = 0x34300000 | ((1 + rev) << 12);
pr_info("OMAP%04x ES2.%i\n", system_rev >> 16, rev);
_set_omap_chip();
return;
}
/* Check hawkeye ids */
for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
@ -114,16 +256,15 @@ void __init omap2_check_revision(void)
omap_ids[i].type >> 16);
j = i;
}
system_rev = omap_ids[j].type;
system_rev |= rev << 8;
_set_system_rev(omap_ids[j].type, rev);
/* Add the cpu class info (24xx) */
system_rev |= 0x24;
_set_omap_chip();
pr_info("OMAP%04x", system_rev >> 16);
if ((system_rev >> 8) & 0x0f)
printk("%x", (system_rev >> 8) & 0x0f);
printk("\n");
pr_info("ES%x", (system_rev >> 12) & 0xf);
pr_info("\n");
}

View File

@ -3,7 +3,7 @@
*
* OMAP cpu type detection
*
* Copyright (C) 2004 Nokia Corporation
* Copyright (C) 2004, 2008 Nokia Corporation
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
@ -26,6 +26,12 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
struct omap_chip_id {
u8 oc;
};
#define OMAP_CHIP_INIT(x) { .oc = x }
extern unsigned int system_rev;
#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f)
@ -345,6 +351,33 @@ IS_OMAP_TYPE(3430, 0x3430)
#define OMAP2430_REV_ES1_0 0x24300000
#define OMAP3430_REV_ES1_0 0x34300000
#define OMAP3430_REV_ES2_0 0x34301000
#define OMAP3430_REV_ES2_1 0x34302000
#define OMAP3430_REV_ES2_2 0x34303000
/*
* omap_chip bits
*
* CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
* valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
* something that is only valid on that particular ES revision.
*
* These bits may be ORed together to indicate structures that are
* available on multiple chip types.
*
* To test whether a particular structure matches the current OMAP chip type,
* use omap_chip_is().
*
*/
#define CHIP_IS_OMAP2420 (1 << 0)
#define CHIP_IS_OMAP2430 (1 << 1)
#define CHIP_IS_OMAP3430 (1 << 2)
#define CHIP_IS_OMAP3430ES1 (1 << 3)
#define CHIP_IS_OMAP3430ES2 (1 << 4)
#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
int omap_chip_is(struct omap_chip_id oci);
/*
* Macro to detect device type i.e. EMU/HS/TST/GP/BAD
@ -362,6 +395,8 @@ IS_OMAP_TYPE(3430, 0x3430)
#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP)
#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD)
#endif
void omap2_check_revision(void);
#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
#endif