mmc: block: allow get_card_status() to return error status

If the MMC_SEND_STATUS command is not successful, we should not return
a zero status word, but instead allow the caller to know positively
that an error occurred.

Convert the open-coded get_card_status() to use the helper function,
and provide definitions for the card state field.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
Russell King - ARM Linux 2011-06-20 20:10:08 +01:00 committed by Chris Ball
parent 6e83e10d92
commit 0a2d4048a2
2 changed files with 19 additions and 24 deletions

View File

@ -525,7 +525,7 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
return result;
}
static u32 get_card_status(struct mmc_card *card, struct request *req)
static int get_card_status(struct mmc_card *card, u32 *status, int retries)
{
struct mmc_command cmd = {0};
int err;
@ -534,11 +534,10 @@ static u32 get_card_status(struct mmc_card *card, struct request *req)
if (!mmc_host_is_spi(card->host))
cmd.arg = card->rca << 16;
cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err)
printk(KERN_ERR "%s: error %d sending status command",
req->rq_disk->disk_name, err);
return cmd.resp[0];
err = mmc_wait_for_cmd(card->host, &cmd, retries);
if (err == 0)
*status = cmd.resp[0];
return err;
}
static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
@ -686,7 +685,6 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
(md->flags & MMC_BLK_REL_WR);
do {
struct mmc_command cmd = {0};
u32 readcmd, writecmd, status = 0;
memset(&brq, 0, sizeof(struct mmc_blk_request));
@ -817,7 +815,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
disable_multi = 1;
continue;
}
status = get_card_status(card, req);
get_card_status(card, &status, 0);
}
if (brq.sbc.error) {
@ -854,12 +852,7 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
do {
int err;
cmd.opcode = MMC_SEND_STATUS;
cmd.arg = card->rca << 16;
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
int err = get_card_status(card, &status, 5);
if (err) {
printk(KERN_ERR "%s: error %d requesting status\n",
req->rq_disk->disk_name, err);
@ -870,16 +863,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req)
* so make sure to check both the busy
* indication and the card state.
*/
} while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
(R1_CURRENT_STATE(cmd.resp[0]) == 7));
#if 0
if (cmd.resp[0] & ~0x00000900)
printk(KERN_ERR "%s: status = %08x\n",
req->rq_disk->disk_name, cmd.resp[0]);
if (mmc_decode_status(cmd.resp))
goto cmd_err;
#endif
} while (!(status & R1_READY_FOR_DATA) ||
(R1_CURRENT_STATE(status) == R1_STATE_PRG));
}
if (brq.cmd.error || brq.stop.error || brq.data.error) {

View File

@ -140,6 +140,16 @@ static inline bool mmc_op_multi(u32 opcode)
#define R1_SWITCH_ERROR (1 << 7) /* sx, c */
#define R1_APP_CMD (1 << 5) /* sr, c */
#define R1_STATE_IDLE 0
#define R1_STATE_READY 1
#define R1_STATE_IDENT 2
#define R1_STATE_STBY 3
#define R1_STATE_TRAN 4
#define R1_STATE_DATA 5
#define R1_STATE_RCV 6
#define R1_STATE_PRG 7
#define R1_STATE_DIS 8
/*
* MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
* R1 is the low order byte; R2 is the next highest byte, when present.