[POWERPC] 8xx: Convert mpc866ads to the new device binding.

Verified on mpc866ads. This version has muram and brg nodes added to dts
to get the things work.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
This commit is contained in:
Scott Wood 2007-11-25 13:09:31 +03:00 committed by Kumar Gala
parent 77d4309e19
commit 0b5cf10691
4 changed files with 188 additions and 328 deletions

View File

@ -12,7 +12,7 @@
/ {
model = "MPC866ADS";
compatible = "mpc8xx";
compatible = "fsl,mpc866ads";
#address-cells = <1>;
#size-cells = <1>;
@ -23,15 +23,15 @@
PowerPC,866@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-line-size = <10>; // 16 bytes
i-cache-line-size = <10>; // 16 bytes
d-cache-size = <2000>; // L1, 8K
i-cache-size = <4000>; // L1, 16K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <f 2>; // decrementer interrupt
interrupt-parent = <&Mpc8xx_pic>;
interrupt-parent = <&PIC>;
};
};
@ -40,107 +40,139 @@
reg = <00000000 800000>;
};
soc866@ff000000 {
localbus@ff000100 {
compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <ff000100 40>;
ranges = <
1 0 ff080000 00008000
5 0 ff0a0000 00008000
>;
board-control@1,0 {
reg = <1 0 20 5 300 4>;
compatible = "fsl,mpc866ads-bcsr";
};
};
soc@ff000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 ff000000 00100000>;
reg = <ff000000 00000200>;
bus-frequency = <0>;
mdio@e80 {
device_type = "mdio";
compatible = "fs_enet";
reg = <e80 8>;
mdio@e00 {
compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
reg = <e00 188>;
#address-cells = <1>;
#size-cells = <0>;
phy: ethernet-phy@f {
PHY: ethernet-phy@f {
reg = <f>;
device_type = "ethernet-phy";
};
};
fec@e00 {
ethernet@e00 {
device_type = "network";
compatible = "fs_enet";
model = "FEC";
device-id = <1>;
compatible = "fsl,mpc866-fec-enet",
"fsl,pq1-fec-enet";
reg = <e00 188>;
mac-address = [ 00 00 0C 00 01 FD ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&Mpc8xx_pic>;
phy-handle = <&Phy>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY>;
linux,network-index = <0>;
};
mpc8xx_pic: pic@ff000000 {
PIC: pic@0 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0 24>;
device_type = "mpc8xx-pic";
compatible = "CPM";
compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
};
cpm@ff000000 {
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "cpm";
model = "CPM";
ranges = <0 0 4000>;
reg = <860 f0>;
command-proc = <9c0>;
compatible = "fsl,mpc866-cpm", "fsl,cpm1";
ranges;
reg = <9c0 40>;
brg-frequency = <0>;
interrupts = <0 2>; // cpm error interrupt
interrupt-parent = <&Cpm_pic>;
interrupt-parent = <&CPM_PIC>;
cpm_pic: pic@930 {
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 2000 2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 1c00>;
};
};
brg@9f0 {
compatible = "fsl,mpc866-brg",
"fsl,cpm1-brg",
"fsl,cpm-brg";
reg = <9f0 10>;
clock-frequency = <0>;
};
CPM_PIC: pic@930 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&Mpc8xx_pic>;
interrupt-parent = <&PIC>;
reg = <930 20>;
device_type = "cpm-pic";
compatible = "CPM";
compatible = "fsl,mpc866-cpm-pic",
"fsl,cpm1-pic";
};
smc@a80 {
serial@a80 {
device_type = "serial";
compatible = "cpm_uart";
model = "SMC";
device-id = <1>;
compatible = "fsl,mpc866-smc-uart",
"fsl,cpm1-smc-uart";
reg = <a80 10 3e80 40>;
clock-setup = <00ffffff 0>;
rx-clock = <1>;
tx-clock = <1>;
current-speed = <0>;
interrupts = <4 3>;
interrupt-parent = <&Cpm_pic>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0090>;
};
smc@a90 {
serial@a90 {
device_type = "serial";
compatible = "cpm_uart";
model = "SMC";
device-id = <2>;
reg = <a90 20 3f80 40>;
clock-setup = <ff00ffff 90000>;
rx-clock = <2>;
tx-clock = <2>;
current-speed = <0>;
interrupts = <3 3>;
interrupt-parent = <&Cpm_pic>;
compatible = "fsl,mpc866-smc-uart",
"fsl,cpm1-smc-uart";
reg = <a90 10 3f80 40>;
interrupts = <3>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <2>;
fsl,cpm-command = <00d0>;
};
scc@a00 {
ethernet@a00 {
device_type = "network";
compatible = "fs_enet";
model = "SCC";
device-id = <1>;
reg = <a00 18 3c00 80>;
mac-address = [ 00 00 0C 00 03 FD ];
interrupts = <1e 3>;
interrupt-parent = <&Cpm_pic>;
compatible = "fsl,mpc866-scc-enet",
"fsl,cpm1-scc-enet";
reg = <a00 18 3c00 100>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <1e>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-command = <0000>;
linux,network-index = <1>;
};
};
};
chosen {
linux,stdout-path = "/soc/cpm/serial@a80";
};
};

View File

@ -18,6 +18,7 @@ config MPC8XXFADS
config MPC86XADS
bool "MPC86XADS"
select CPM1
select PPC_CPM_NEW_BINDING
help
MPC86x Application Development System by Freescale Semiconductor.
The MPC86xADS is meant to serve as a platform for s/w and h/w

View File

@ -15,27 +15,6 @@
#ifndef __ASM_MPC86XADS_H__
#define __ASM_MPC86XADS_H__
#include <sysdev/fsl_soc.h>
/* U-Boot maps BCSR to 0xff080000 */
#define BCSR_ADDR ((uint)0xff080000)
#define BCSR_SIZE ((uint)32)
#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
#define MPC8xx_CPM_OFFSET (0x9c0)
#define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET)
#define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver
#define PCMCIA_MEM_ADDR ((uint)0xff020000)
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
/* Bits of interest in the BCSRs.
*/
#define BCSR1_ETHEN ((uint)0x20000000)
@ -64,28 +43,5 @@
#define BCSR5_MII1_EN 0x02
#define BCSR5_MII1_RST 0x01
/* Interrupt level assignments */
#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */
#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */
#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */
/* We don't use the 8259 */
#define NR_8259_INTS 0
/* CPM Ethernet through SCC1 */
#define PA_ENET_RXD ((ushort)0x0001)
#define PA_ENET_TXD ((ushort)0x0002)
#define PA_ENET_TCLK ((ushort)0x0100)
#define PA_ENET_RCLK ((ushort)0x0200)
#define PB_ENET_TENA ((uint)0x00001000)
#define PC_ENET_CLSN ((ushort)0x0010)
#define PC_ENET_RENA ((ushort)0x0020)
/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
* SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
*/
#define SICR_ENET_MASK ((uint)0x000000ff)
#define SICR_ENET_CLKRT ((uint)0x0000002c)
#endif /* __ASM_MPC86XADS_H__ */
#endif /* __KERNEL__ */

View File

@ -6,265 +6,135 @@
*
* Copyright 2005 MontaVista Software Inc.
*
* Heavily modified by Scott Wood <scottwood@freescale.com>
* Copyright 2007 Freescale Semiconductor, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/root_dev.h>
#include <linux/of_platform.h>
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/mii.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
#include <asm/commproc.h>
#include <asm/fs_pd.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/commproc.h>
static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi);
static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi);
static void init_scc1_ioports(struct fs_platform_info* ptr);
#include "mpc86xads.h"
void __init mpc86xads_board_setup(void)
struct cpm_pin {
int port, pin, flags;
};
static struct cpm_pin mpc866ads_pins[] = {
/* SMC1 */
{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
/* SMC2 */
{CPM_PORTB, 21, CPM_PIN_INPUT}, /* RX */
{CPM_PORTB, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
/* SCC1 */
{CPM_PORTA, 6, CPM_PIN_INPUT}, /* CLK1 */
{CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */
{CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */
{CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */
{CPM_PORTB, 19, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
{CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
{CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
/* MII */
{CPM_PORTD, 3, CPM_PIN_OUTPUT},
{CPM_PORTD, 4, CPM_PIN_OUTPUT},
{CPM_PORTD, 5, CPM_PIN_OUTPUT},
{CPM_PORTD, 6, CPM_PIN_OUTPUT},
{CPM_PORTD, 7, CPM_PIN_OUTPUT},
{CPM_PORTD, 8, CPM_PIN_OUTPUT},
{CPM_PORTD, 9, CPM_PIN_OUTPUT},
{CPM_PORTD, 10, CPM_PIN_OUTPUT},
{CPM_PORTD, 11, CPM_PIN_OUTPUT},
{CPM_PORTD, 12, CPM_PIN_OUTPUT},
{CPM_PORTD, 13, CPM_PIN_OUTPUT},
{CPM_PORTD, 14, CPM_PIN_OUTPUT},
{CPM_PORTD, 15, CPM_PIN_OUTPUT},
};
static void __init init_ioports(void)
{
cpm8xx_t *cp;
unsigned int *bcsr_io;
u8 tmpval8;
int i;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
cp = (cpm8xx_t *)immr_map(im_cpm);
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR\n");
return;
}
#ifdef CONFIG_SERIAL_CPM_SMC1
clrbits32(bcsr_io, BCSR1_RS232EN_1);
clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1 */
tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX);
out_8(&(cp->cp_smc[0].smc_smcm), tmpval8);
clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN);
#else
setbits32(bcsr_io,BCSR1_RS232EN_1);
out_be16(&cp->cp_smc[0].smc_smcmr, 0);
out_8(&cp->cp_smc[0].smc_smce, 0);
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
clrbits32(bcsr_io,BCSR1_RS232EN_2);
clrbits32(&cp->cp_simode, 0xe0000000 >> 1);
setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */
tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX);
out_8(&(cp->cp_smc[1].smc_smcm), tmpval8);
clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN);
init_smc2_uart_ioports(0);
#else
setbits32(bcsr_io,BCSR1_RS232EN_2);
out_be16(&cp->cp_smc[1].smc_smcmr, 0);
out_8(&cp->cp_smc[1].smc_smce, 0);
#endif
immr_unmap(cp);
iounmap(bcsr_io);
}
static void init_fec1_ioports(struct fs_platform_info* ptr)
{
iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport);
/* configure FEC1 pins */
setbits16(&io_port->iop_pdpar, 0x1fff);
setbits16(&io_port->iop_pddir, 0x1fff);
immr_unmap(io_port);
}
void init_fec_ioports(struct fs_platform_info *fpi)
{
int fec_no = fs_get_fec_index(fpi->fs_no);
switch (fec_no) {
case 0:
init_fec1_ioports(fpi);
break;
default:
printk(KERN_ERR "init_fec_ioports: invalid FEC number\n");
return;
}
}
static void init_scc1_ioports(struct fs_platform_info* fpi)
{
unsigned *bcsr_io;
iop8xx_t *io_port;
cpm8xx_t *cp;
bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
io_port = (iop8xx_t *)immr_map(im_ioport);
cp = (cpm8xx_t *)immr_map(im_cpm);
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR\n");
return;
for (i = 0; i < ARRAY_SIZE(mpc866ads_pins); i++) {
struct cpm_pin *pin = &mpc866ads_pins[i];
cpm1_set_pin(pin->port, pin->pin, pin->flags);
}
/* Configure port A pins for Txd and Rxd.
*/
setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD);
clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD);
clrbits16(&io_port->iop_paodr, PA_ENET_TXD);
cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK1, CPM_CLK_TX);
cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX);
/* Configure port C pins to enable CLSN and RENA.
*/
clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
/* Configure port A for TCLK and RCLK.
*/
setbits16(&io_port->iop_papar, PA_ENET_TCLK | PA_ENET_RCLK);
clrbits16(&io_port->iop_padir, PA_ENET_TCLK | PA_ENET_RCLK);
clrbits32(&cp->cp_pbpar, PB_ENET_TENA);
clrbits32(&cp->cp_pbdir, PB_ENET_TENA);
/* Configure Serial Interface clock routing.
* First, clear all SCC bits to zero, then set the ones we want.
*/
clrbits32(&cp->cp_sicr, SICR_ENET_MASK);
setbits32(&cp->cp_sicr, SICR_ENET_CLKRT);
/* In the original SCC enet driver the following code is placed at
the end of the initialization */
setbits32(&cp->cp_pbpar, PB_ENET_TENA);
setbits32(&cp->cp_pbdir, PB_ENET_TENA);
clrbits32(bcsr_io+1, BCSR1_ETHEN);
iounmap(bcsr_io);
immr_unmap(cp);
immr_unmap(io_port);
}
void init_scc_ioports(struct fs_platform_info *fpi)
{
int scc_no = fs_get_scc_index(fpi->fs_no);
switch (scc_no) {
case 0:
init_scc1_ioports(fpi);
break;
default:
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
return;
}
}
static void init_smc1_uart_ioports(struct fs_uart_platform_info* ptr)
{
unsigned *bcsr_io;
cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm);
setbits32(&cp->cp_pbpar, 0x000000c0);
clrbits32(&cp->cp_pbdir, 0x000000c0);
clrbits16(&cp->cp_pbodr, 0x00c0);
immr_unmap(cp);
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_1);
iounmap(bcsr_io);
}
static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi)
{
unsigned *bcsr_io;
cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm);
setbits32(&cp->cp_pbpar, 0x00000c00);
clrbits32(&cp->cp_pbdir, 0x00000c00);
clrbits16(&cp->cp_pbodr, 0x0c00);
immr_unmap(cp);
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_2);
iounmap(bcsr_io);
}
void init_smc_ioports(struct fs_uart_platform_info *data)
{
int smc_no = fs_uart_id_fsid2smc(data->fs_no);
switch (smc_no) {
case 0:
init_smc1_uart_ioports(data);
data->brg = data->clk_rx;
break;
case 1:
init_smc2_uart_ioports(data);
data->brg = data->clk_rx;
break;
default:
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
return;
}
}
int platform_device_skip(const char *model, int id)
{
return 0;
/* Set FEC1 and FEC2 to MII mode */
clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
}
static void __init mpc86xads_setup_arch(void)
{
struct device_node *np;
u32 __iomem *bcsr_io;
cpm_reset();
init_ioports();
mpc86xads_board_setup();
np = of_find_compatible_node(NULL, NULL, "fsl,mpc866ads-bcsr");
if (!np) {
printk(KERN_CRIT "Could not find fsl,mpc866ads-bcsr node\n");
return;
}
ROOT_DEV = Root_NFS;
bcsr_io = of_iomap(np, 0);
of_node_put(np);
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR\n");
return;
}
clrbits32(bcsr_io, BCSR1_RS232EN_1 | BCSR1_RS232EN_2 | BCSR1_ETHEN);
iounmap(bcsr_io);
}
static int __init mpc86xads_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC866ADS"))
return 0;
return 1;
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,mpc866ads");
}
static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "soc", },
{ .name = "cpm", },
{ .name = "localbus", },
{},
};
static int __init declare_of_platform_devices(void)
{
if (machine_is(mpc86x_ads))
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
device_initcall(declare_of_platform_devices);
define_machine(mpc86x_ads) {
.name = "MPC86x ADS",
.probe = mpc86xads_probe,
@ -275,4 +145,5 @@ define_machine(mpc86x_ads) {
.calibrate_decr = mpc8xx_calibrate_decr,
.set_rtc_time = mpc8xx_set_rtc_time,
.get_rtc_time = mpc8xx_get_rtc_time,
.progress = udbg_progress,
};