powerpc/fsl_booke: smp support for booting a relocatable kernel above 64M

When booting above the 64M for a secondary cpu, we also face the
same issue as the boot cpu that the PAGE_OFFSET map two different
physical address for the init tlb and the final map. So we have to use
switch_to_as1/restore_to_as0 between the conversion of these two
maps. When restoring to as0 for a secondary cpu, we only need to
return to the caller. So add a new parameter for function
restore_to_as0 for this purpose.

Use LOAD_REG_ADDR_PIC to get the address of variables which may
be used before we set the final map in cams for the secondary cpu.
Move the setting of cams a bit earlier in order to avoid the
unnecessary using of LOAD_REG_ADDR_PIC.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This commit is contained in:
Kevin Hao 2013-12-24 15:12:11 +08:00 committed by Scott Wood
parent 7d2471f9fa
commit 0be7d969b0
4 changed files with 35 additions and 18 deletions

View File

@ -216,8 +216,7 @@ set_ivor:
/* Check to see if we're the second processor, and jump
* to the secondary_start code if so
*/
lis r24, boot_cpuid@h
ori r24, r24, boot_cpuid@l
LOAD_REG_ADDR_PIC(r24, boot_cpuid)
lwz r24, 0(r24)
cmpwi r24, -1
mfspr r24,SPRN_PIR
@ -1146,6 +1145,29 @@ _GLOBAL(__flush_disable_L1)
/* When we get here, r24 needs to hold the CPU # */
.globl __secondary_start
__secondary_start:
LOAD_REG_ADDR_PIC(r3, tlbcam_index)
lwz r3,0(r3)
mtctr r3
li r26,0 /* r26 safe? */
bl switch_to_as1
mr r27,r3 /* tlb entry */
/* Load each CAM entry */
1: mr r3,r26
bl loadcam_entry
addi r26,r26,1
bdnz 1b
mr r3,r27 /* tlb entry */
LOAD_REG_ADDR_PIC(r4, memstart_addr)
lwz r4,0(r4)
mr r5,r25 /* phys kernel start */
rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */
subf r4,r5,r4 /* memstart_addr - phys kernel start */
li r5,0 /* no device tree */
li r6,0 /* not boot cpu */
bl restore_to_as0
lis r3,__secondary_hold_acknowledge@h
ori r3,r3,__secondary_hold_acknowledge@l
stw r24,0(r3)
@ -1154,17 +1176,6 @@ __secondary_start:
mr r4,r24 /* Why? */
bl call_setup_cpu
lis r3,tlbcam_index@ha
lwz r3,tlbcam_index@l(r3)
mtctr r3
li r26,0 /* r26 safe? */
/* Load each CAM entry */
1: mr r3,r26
bl loadcam_entry
addi r26,r26,1
bdnz 1b
/* get current_thread_info and current */
lis r1,secondary_ti@ha
lwz r1,secondary_ti@l(r1)
@ -1253,6 +1264,7 @@ _GLOBAL(switch_to_as1)
* r3 - the tlb entry which should be invalidated
* r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0)
* r5 - device tree virtual address. If r4 is 0, r5 is ignored.
* r6 - boot cpu
*/
_GLOBAL(restore_to_as0)
mflr r0
@ -1268,6 +1280,7 @@ _GLOBAL(restore_to_as0)
*/
add r9,r9,r4
add r5,r5,r4
add r0,r0,r4
2: mfmsr r7
li r8,(MSR_IS | MSR_DS)
@ -1290,7 +1303,9 @@ _GLOBAL(restore_to_as0)
isync
cmpwi r4,0
bne 3f
cmpwi cr1,r6,0
cror eq,4*cr1+eq,eq
bne 3f /* offset != 0 && is_boot_cpu */
mtlr r0
blr

View File

@ -231,7 +231,7 @@ void __init adjust_total_lowmem(void)
i = switch_to_as1();
__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
restore_to_as0(i, 0, 0);
restore_to_as0(i, 0, 0, 1);
pr_info("Memory CAM mapping: ");
for (i = 0; i < tlbcam_index - 1; i++)
@ -302,7 +302,7 @@ notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
else
map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
0x4000000, CONFIG_LOWMEM_CAM_NUM);
restore_to_as0(n, offset, __va(dt_ptr));
restore_to_as0(n, offset, __va(dt_ptr), 1);
/* We should never reach here */
panic("Relocation error");
}

View File

@ -149,7 +149,7 @@ extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(unsigned long top);
extern void adjust_total_lowmem(void);
extern int switch_to_as1(void);
extern void restore_to_as0(int esel, int offset, void *dt_ptr);
extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
#endif
extern void loadcam_entry(unsigned int index);

View File

@ -402,7 +402,9 @@ _GLOBAL(set_context)
* Load TLBCAM[index] entry in to the L2 CAM MMU
*/
_GLOBAL(loadcam_entry)
LOAD_REG_ADDR(r4, TLBCAM)
mflr r5
LOAD_REG_ADDR_PIC(r4, TLBCAM)
mtlr r5
mulli r5,r3,TLBCAM_SIZE
add r3,r5,r4
lwz r4,TLBCAM_MAS0(r3)