From c21986a76220919bb06e4c04a89a8a62aeac107e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 4 Mar 2009 00:18:11 -0800 Subject: [PATCH 01/71] jsflash: stop defining MAJOR_NR Ever since early 2.5 kernels block drivers don't need to define MAJOR_NR anymore, so use the JSFD_MAJOR defined directly and kill it. Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- drivers/sbus/char/jsflash.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c index a9a9893a5f95..e6d1fc8c54f1 100644 --- a/drivers/sbus/char/jsflash.c +++ b/drivers/sbus/char/jsflash.c @@ -38,9 +38,6 @@ #include #include #include - -#define MAJOR_NR JSFD_MAJOR - #include #include #include From f4c13638185c91a269c63fcfb980d89180cf43a1 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Mar 2009 00:19:28 -0800 Subject: [PATCH 02/71] sparc64: wait_event_interruptible_timeout may return -ERESTARTSYS wait_event_interruptible_timeout may return -ERESTARTSYS. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/sbus/char/bbc_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index f08e169ba1b5..7e30e5f6e032 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -129,7 +129,7 @@ static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status) bp->waiting = 1; add_wait_queue(&bp->wq, &wait); while (limit-- > 0) { - unsigned long val; + long val; val = wait_event_interruptible_timeout( bp->wq, From d0cac39e4ec8097e4c7099d291b1fdcc0fe56b58 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 4 Mar 2009 14:43:47 -0800 Subject: [PATCH 03/71] sparc64: Fix lost interrupts on sun4u. Based upon a report by Meelis Roos. Sparc64 SBUS and PCI controllers use a combination of IMAP and ICLR registers to manage device interrupts. The IMAP register contains the "valid" enable bit as well as CPU targetting information. Whereas the ICLR register is written with zero at the end of handling an interrupt to reset the state machine for that interrupt to IDLE so it can be sent again. For PCI slot and SBUS slot devices we can have multiple interrupts sharing the same IMAP register. There are individual ICLR registers but only one IMAP register for managing those. We represent each shared case with individual virtual IRQs so the generic IRQ layer thinks there is only one user of the IRQ instance. In such shared IMAP cases this is wrong, so if there are multiple active users then a free_irq() call will prematurely turn off the interrupt by clearing the Valid bit in the IMAP register even though there are other active users. Fix this by simply doing nothing in sun4u_disable_irq() and checking IRQF_DISABLED during IRQ dispatch. This situation doesn't exist in the hypervisor sun4v cases, so I left those alone. Tested-by: Meelis Roos Signed-off-by: David S. Miller --- arch/sparc/kernel/irq_64.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index e289376198eb..1c378d8e90c5 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -323,17 +323,25 @@ static void sun4u_set_affinity(unsigned int virt_irq, sun4u_irq_enable(virt_irq); } +/* Don't do anything. The desc->status check for IRQ_DISABLED in + * handler_irq() will skip the handler call and that will leave the + * interrupt in the sent state. The next ->enable() call will hit the + * ICLR register to reset the state machine. + * + * This scheme is necessary, instead of clearing the Valid bit in the + * IMAP register, to handle the case of IMAP registers being shared by + * multiple INOs (and thus ICLR registers). Since we use a different + * virtual IRQ for each shared IMAP instance, the generic code thinks + * there is only one user so it prematurely calls ->disable() on + * free_irq(). + * + * We have to provide an explicit ->disable() method instead of using + * NULL to get the default. The reason is that if the generic code + * sees that, it also hooks up a default ->shutdown method which + * invokes ->mask() which we do not want. See irq_chip_set_defaults(). + */ static void sun4u_irq_disable(unsigned int virt_irq) { - struct irq_handler_data *data = get_irq_chip_data(virt_irq); - - if (likely(data)) { - unsigned long imap = data->imap; - unsigned long tmp = upa_readq(imap); - - tmp &= ~IMAP_VALID; - upa_writeq(tmp, imap); - } } static void sun4u_irq_eoi(unsigned int virt_irq) @@ -746,7 +754,8 @@ void handler_irq(int irq, struct pt_regs *regs) desc = irq_desc + virt_irq; - desc->handle_irq(virt_irq, desc); + if (!(desc->status & IRQ_DISABLED)) + desc->handle_irq(virt_irq, desc); bucket_pa = next_pa; } From ff392c497b43ddedbab5627b53928a654cc5486e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Mar 2009 14:48:36 -0500 Subject: [PATCH 04/71] xfs: prevent kernel crash due to corrupted inode log format Andras Korn reported an oops on log replay causes by a corrupted xfs_inode_log_format_t passing a 0 size to kmem_zalloc. This patch handles to small or too large numbers of log regions gracefully by rejecting the log replay with a useful error message. Signed-off-by: Christoph Hellwig Reported-by: Andras Korn Reviewed-by: Eric Sandeen Signed-off-by: Felix Blyakher --- fs/xfs/xfs_log_recover.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index b1047de2fffd..61af610d79b3 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1455,10 +1455,19 @@ xlog_recover_add_to_trans( item = item->ri_prev; if (item->ri_total == 0) { /* first region to be added */ - item->ri_total = in_f->ilf_size; - ASSERT(item->ri_total <= XLOG_MAX_REGIONS_IN_ITEM); - item->ri_buf = kmem_zalloc((item->ri_total * - sizeof(xfs_log_iovec_t)), KM_SLEEP); + if (in_f->ilf_size == 0 || + in_f->ilf_size > XLOG_MAX_REGIONS_IN_ITEM) { + xlog_warn( + "XFS: bad number of regions (%d) in inode log format", + in_f->ilf_size); + ASSERT(0); + return XFS_ERROR(EIO); + } + + item->ri_total = in_f->ilf_size; + item->ri_buf = + kmem_zalloc(item->ri_total * sizeof(xfs_log_iovec_t), + KM_SLEEP); } ASSERT(item->ri_total > item->ri_cnt); /* Description region is ri_buf[0] */ From 7d46be4a25fdfb503c20bad60a618adebfe2ac5c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Mar 2009 14:48:35 -0500 Subject: [PATCH 05/71] xfs: prevent lockdep false positive in xfs_iget_cache_miss The inode can't be locked by anyone else as we just created it a few lines above and it's not been added to any lookup data structure yet. So use a trylock that must succeed to get around the lockdep warnings. Signed-off-by: Christoph Hellwig Reported-by: Alexander Beregalov Reviewed-by: Eric Sandeen Reviewed-by: Felix Blyakher Signed-off-by: Felix Blyakher --- fs/xfs/xfs_iget.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c index e2fb6210d4c5..478e587087fe 100644 --- a/fs/xfs/xfs_iget.c +++ b/fs/xfs/xfs_iget.c @@ -246,9 +246,6 @@ xfs_iget_cache_miss( goto out_destroy; } - if (lock_flags) - xfs_ilock(ip, lock_flags); - /* * Preload the radix tree so we can insert safely under the * write spinlock. Note that we cannot sleep inside the preload @@ -256,7 +253,16 @@ xfs_iget_cache_miss( */ if (radix_tree_preload(GFP_KERNEL)) { error = EAGAIN; - goto out_unlock; + goto out_destroy; + } + + /* + * Because the inode hasn't been added to the radix-tree yet it can't + * be found by another thread, so we can do the non-sleeping lock here. + */ + if (lock_flags) { + if (!xfs_ilock_nowait(ip, lock_flags)) + BUG(); } mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1); @@ -284,7 +290,6 @@ xfs_iget_cache_miss( out_preload_end: write_unlock(&pag->pag_ici_lock); radix_tree_preload_end(); -out_unlock: if (lock_flags) xfs_iunlock(ip, lock_flags); out_destroy: From c141b2928fe20396a9ecdec85526e4b66ae96c90 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 3 Mar 2009 14:48:37 -0500 Subject: [PATCH 06/71] xfs: only issues a cache flush on unmount if barriers are enabled Currently we unconditionally issue a flush from xfs_free_buftarg, but since 2.6.29-rc1 this gives a warning in the style of end_request: I/O error, dev vdb, sector 0 Signed-off-by: Christoph Hellwig Reviewed-by: Eric Sandeen Signed-off-by: Felix Blyakher --- fs/xfs/linux-2.6/xfs_buf.c | 12 ++++++++++-- fs/xfs/linux-2.6/xfs_buf.h | 2 +- fs/xfs/linux-2.6/xfs_super.c | 10 +++++----- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index cb329edc925b..aa1016bb9134 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -34,6 +34,12 @@ #include #include +#include "xfs_sb.h" +#include "xfs_inum.h" +#include "xfs_ag.h" +#include "xfs_dmapi.h" +#include "xfs_mount.h" + static kmem_zone_t *xfs_buf_zone; STATIC int xfsbufd(void *); STATIC int xfsbufd_wakeup(int, gfp_t); @@ -1435,10 +1441,12 @@ xfs_unregister_buftarg( void xfs_free_buftarg( - xfs_buftarg_t *btp) + struct xfs_mount *mp, + struct xfs_buftarg *btp) { xfs_flush_buftarg(btp, 1); - xfs_blkdev_issue_flush(btp); + if (mp->m_flags & XFS_MOUNT_BARRIER) + xfs_blkdev_issue_flush(btp); xfs_free_bufhash(btp); iput(btp->bt_mapping->host); diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h index 288ae7c4c800..9b4d666ad31f 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/linux-2.6/xfs_buf.h @@ -413,7 +413,7 @@ static inline int XFS_bwrite(xfs_buf_t *bp) * Handling of buftargs. */ extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int); -extern void xfs_free_buftarg(xfs_buftarg_t *); +extern void xfs_free_buftarg(struct xfs_mount *, struct xfs_buftarg *); extern void xfs_wait_buftarg(xfs_buftarg_t *); extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int); extern int xfs_flush_buftarg(xfs_buftarg_t *, int); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index c71e226da7f5..32ae5028e96b 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -734,15 +734,15 @@ xfs_close_devices( { if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { struct block_device *logdev = mp->m_logdev_targp->bt_bdev; - xfs_free_buftarg(mp->m_logdev_targp); + xfs_free_buftarg(mp, mp->m_logdev_targp); xfs_blkdev_put(logdev); } if (mp->m_rtdev_targp) { struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev; - xfs_free_buftarg(mp->m_rtdev_targp); + xfs_free_buftarg(mp, mp->m_rtdev_targp); xfs_blkdev_put(rtdev); } - xfs_free_buftarg(mp->m_ddev_targp); + xfs_free_buftarg(mp, mp->m_ddev_targp); } /* @@ -811,9 +811,9 @@ xfs_open_devices( out_free_rtdev_targ: if (mp->m_rtdev_targp) - xfs_free_buftarg(mp->m_rtdev_targp); + xfs_free_buftarg(mp, mp->m_rtdev_targp); out_free_ddev_targ: - xfs_free_buftarg(mp->m_ddev_targp); + xfs_free_buftarg(mp, mp->m_ddev_targp); out_close_rtdev: if (rtdev) xfs_blkdev_put(rtdev); From d15bd1067b1fcb2b7250d22bc0c7c7fea0b759f7 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Sat, 7 Mar 2009 13:31:29 +0100 Subject: [PATCH 07/71] kbuild: fix C libary confusion in unifdef.c due to getline() This fixes an error when compiling the kernel. CHK include/linux/version.h HOSTCC scripts/unifdef scripts/unifdef.c:209: error: conflicting types for 'getline' /usr/include/stdio.h:651: note: previous declaration of 'getline' was here make[1]: *** [scripts/unifdef] Error 1 make: *** [__headers] Error 2 Signed-off-by: Justin P. Mattock Cc: Frederic Weisbecker Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/unifdef.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/unifdef.c b/scripts/unifdef.c index 552025e72acb..05a31a6c7e1b 100644 --- a/scripts/unifdef.c +++ b/scripts/unifdef.c @@ -206,7 +206,7 @@ static void done(void); static void error(const char *); static int findsym(const char *); static void flushline(bool); -static Linetype getline(void); +static Linetype get_line(void); static Linetype ifeval(const char **); static void ignoreoff(void); static void ignoreon(void); @@ -512,7 +512,7 @@ process(void) for (;;) { linenum++; - lineval = getline(); + lineval = get_line(); trans_table[ifstate[depth]][lineval](); debug("process %s -> %s depth %d", linetype_name[lineval], @@ -526,7 +526,7 @@ process(void) * help from skipcomment(). */ static Linetype -getline(void) +get_line(void) { const char *cp; int cursym; From a2ebcc7a863761b6d59a4183c600edf5af63b8d2 Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Sun, 22 Feb 2009 10:54:55 -0800 Subject: [PATCH 08/71] kbuild: fix mkspec to cleanup RPM_BUILD_ROOT The contents of the %clean section in mkspec is currently commented out leaving RPM_BUILD_ROOT and its contents on the build machine. This patch removes it once the rpm build process is complete. Signed-off-by: Josh Hunt Signed-off-by: Sam Ravnborg --- scripts/package/mkspec | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/mkspec b/scripts/package/mkspec index ee448cdc6a2b..3d93f8c81252 100755 --- a/scripts/package/mkspec +++ b/scripts/package/mkspec @@ -96,7 +96,7 @@ echo "%endif" echo "" echo "%clean" -echo '#echo -rf $RPM_BUILD_ROOT' +echo 'rm -rf $RPM_BUILD_ROOT' echo "" echo "%files" echo '%defattr (-, root, root)' From b925dbfe3c59b637666670a60473a15d29e0a7a7 Mon Sep 17 00:00:00 2001 From: Josh Hunt Date: Thu, 12 Feb 2009 10:16:05 -0800 Subject: [PATCH 09/71] kbuild: fix 'make rpm' when CONFIG_LOCALVERSION_AUTO=y and using SCM tree Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source tree under SCM. This is due to KERNELRELEASE being different when the initial make is run and when make is run from rpmbuild. mkspec creates kernel.spec using KERNELRELEASE: echo "%files" echo '%defattr (-, root, root)' echo "%dir /lib/modules" echo "/lib/modules/$KERNELRELEASE" echo "/lib/firmware" echo "/boot/*" echo "" When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any additional version info from SCM. Next, the srctree is tarred up and SCM information is excluded. rpmbuild reruns make and in the process generates a new include/config/kernel.release and thus a new KERNELRELEASE. However this time the SCM information is gone so KERNELRELEASE no longer has the additional version information. When "make modules_install" runs, it uses the new KERNELRELEASE value to determine where to install the modules. This conflicts with where the spec file assumes they are going because of the mis-matching KERNELRELEASE versions. + INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root + make -j16 modules_install INSTALL crypto/aead.ko INSTALL crypto/cbc.ko INSTALL crypto/chainiv.ko INSTALL crypto/crc32c.ko INSTALL crypto/crypto_algapi.ko INSTALL crypto/crypto_blkcipher.ko INSTALL crypto/crypto_hash.ko INSTALL crypto/cryptomgr.ko INSTALL crypto/ecb.ko INSTALL crypto/eseqiv.ko INSTALL crypto/krng.ko INSTALL crypto/md5.ko INSTALL crypto/pcbc.ko INSTALL crypto/rng.ko INSTALL drivers/block/cciss.ko INSTALL drivers/hid/hid-dummy.ko INSTALL drivers/scsi/iscsi_tcp.ko INSTALL drivers/scsi/libiscsi.ko INSTALL drivers/scsi/libiscsi_tcp.ko INSTALL drivers/scsi/scsi_transport_iscsi.ko INSTALL drivers/scsi/scsi_wait_scan.ko INSTALL fs/lockd/lockd.ko INSTALL fs/nfs/nfs.ko INSTALL fs/nfsd/nfsd.ko INSTALL lib/libcrc32c.ko INSTALL net/sunrpc/sunrpc.ko DEPMOD 2.6.29-rc4-tip + cp arch/x86/boot/bzImage /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422 + cp System.map /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422 + cp .config /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422 + cp vmlinux vmlinux.orig + bzip2 -9 vmlinux + mv vmlinux.bz2 /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2 + mv vmlinux.orig vmlinux + /usr/lib/rpm/brp-compress Processing files: kernel-2.6.29rc4tip01479g5d85422-2 error: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 RPM build errors: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 make[1]: *** [rpm] Error 1 make: *** [rpm] Error 2 I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both with and without CONFIG_LOCALVERSION_AUTO=y. Signed-off-by: Josh Hunt Signed-off-by: Sam Ravnborg ---- --- Makefile | 16 +++++++++++----- scripts/package/Makefile | 3 ++- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/Makefile b/Makefile index d04ee0ad1dcc..55424172bea4 100644 --- a/Makefile +++ b/Makefile @@ -904,12 +904,18 @@ localver = $(subst $(space),, $(string) \ # and if the SCM is know a tag from the SCM is appended. # The appended tag is determined by the SCM used. # -# Currently, only git is supported. -# Other SCMs can edit scripts/setlocalversion and add the appropriate -# checks as needed. +# .scmversion is used when generating rpm packages so we do not loose +# the version information from the SCM when we do the build of the kernel +# from the copied source ifdef CONFIG_LOCALVERSION_AUTO - _localver-auto = $(shell $(CONFIG_SHELL) \ - $(srctree)/scripts/setlocalversion $(srctree)) + +ifeq ($(wildcard .scmversion),) + _localver-auto = $(shell $(CONFIG_SHELL) \ + $(srctree)/scripts/setlocalversion $(srctree)) +else + _localver-auto = $(shell cat .scmversion 2> /dev/null) +endif + localver-auto = $(LOCALVERSION)$(_localver-auto) endif diff --git a/scripts/package/Makefile b/scripts/package/Makefile index 8c6b7b09606a..fa4a0a17b7e0 100644 --- a/scripts/package/Makefile +++ b/scripts/package/Makefile @@ -35,9 +35,10 @@ $(objtree)/kernel.spec: $(MKSPEC) $(srctree)/Makefile rpm-pkg rpm: $(objtree)/kernel.spec FORCE $(MAKE) clean $(PREV) ln -sf $(srctree) $(KERNELPATH) + $(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion $(PREV) tar -cz $(RCS_TAR_IGNORE) -f $(KERNELPATH).tar.gz $(KERNELPATH)/. $(PREV) rm $(KERNELPATH) - + rm -f $(objtree)/.scmversion set -e; \ $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version set -e; \ From 75bccd881a49d2da796ec0852158f957dc023f61 Mon Sep 17 00:00:00 2001 From: Gilles Espinasse Date: Sat, 7 Mar 2009 13:57:25 +0100 Subject: [PATCH 10/71] kbuild: remove unused -r option for module-init-tool depmod Following a thread on busybox mailing list depmod -r option is ignored by module-init-tools depmod -r option break busybox depmod. So the best solution look to remove -r from kernel Makefile Signed-off-by: Gilles Espinasse Signed-off-by: Sam Ravnborg --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 55424172bea4..5a5b82eaaec2 100644 --- a/Makefile +++ b/Makefile @@ -1543,7 +1543,7 @@ quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) cmd_depmod = \ if [ -r System.map -a -x $(DEPMOD) ]; then \ $(DEPMOD) -ae -F System.map \ - $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r) \ + $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \ $(KERNELRELEASE); \ fi From 0796e75503adc6b0a119493ce2e599fb5fd8f96e Mon Sep 17 00:00:00 2001 From: Friedrich Oslage Date: Sun, 8 Mar 2009 20:13:42 -0700 Subject: [PATCH 11/71] sunhme: Fix qfe parent detection. Signed-off-by: Friedrich Oslage Signed-off-by: David S. Miller --- drivers/net/sunhme.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c index cc4013be5e18..0ff837a9c804 100644 --- a/drivers/net/sunhme.c +++ b/drivers/net/sunhme.c @@ -2630,8 +2630,6 @@ static int __devinit happy_meal_sbus_probe_one(struct of_device *op, int is_qfe) int err = -ENODEV; sbus_dp = to_of_device(op->dev.parent)->node; - if (is_qfe) - sbus_dp = to_of_device(op->dev.parent->parent)->node; /* We can match PCI devices too, do not accept those here. */ if (strcmp(sbus_dp->name, "sbus")) From c189846ecf900cd6b3ad7d3cef5b45a746ce646b Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Mon, 9 Mar 2009 09:45:12 +0800 Subject: [PATCH 12/71] MIPS: Fix build of non-CONFIG_SYSVIPC version of sys_32_ipc Signed-off-by: Xiaotian Feng Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 2f8452b404c7..1a86f84fa947 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -235,7 +235,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third, #else SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third, - u32, ptr, u32 fifth) + u32, ptr, u32, fifth) { return -ENOSYS; } From a644b2774d41409519bb33a16bd577cb41bb3095 Mon Sep 17 00:00:00 2001 From: Shinya Kuribayashi Date: Tue, 3 Mar 2009 18:05:51 +0900 Subject: [PATCH 13/71] MIPS: NEC VR5500 processor support fixup Current VR5500 processor support lacks of some functions which are expected to be configured/synthesized on arch initialization. Here're some VR5500A spec notes: * All execution hazards are handled in hardware. * Once VR5500A stops the operation of the pipeline by WAIT instruction, it could return from the standby mode only when either a reset, NMI request, or all enabled interrupts is/are detected. In other words, if interrupts are disabled by Status.IE=0, it keeps in standby mode even when interrupts are internally asserted. Notes on WAIT: The operation of the processor is undefined if WAIT insn is in the branch delay slot. The operation is also undefined if WAIT insn is executed when Status.EXL and Status.ERL are set to 1. * VR5500A core only implements the Load prefetch. With these changes, it boots fine. Signed-off-by: Shinya Kuribayashi Signed-off-by: Ralf Baechle --- arch/mips/include/asm/hazards.h | 3 ++- arch/mips/include/asm/prefetch.h | 2 +- arch/mips/kernel/cpu-probe.c | 1 + arch/mips/mm/page.c | 3 ++- arch/mips/mm/tlbex.c | 1 + 5 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index 43baed16a109..134e1fc8f4d6 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -138,7 +138,8 @@ do { \ __instruction_hazard(); \ } while (0) -#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) +#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ + defined(CONFIG_CPU_R5500) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. diff --git a/arch/mips/include/asm/prefetch.h b/arch/mips/include/asm/prefetch.h index 17850834ccb0..a56594f360ee 100644 --- a/arch/mips/include/asm/prefetch.h +++ b/arch/mips/include/asm/prefetch.h @@ -26,7 +26,7 @@ * Pref_WriteBackInvalidate is a nop and Pref_PrepareForStore is broken in * current versions due to erratum G105. * - * VR7701 only implements the Load prefetch. + * VR5500 (including VR5701 and VR7701) only implement load prefetch. * * Finally MIPS32 and MIPS64 implement all of the following hints. */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index a7162a4484cf..1bdbcad3bb74 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -149,6 +149,7 @@ void __init check_wait(void) case CPU_R4650: case CPU_R4700: case CPU_R5000: + case CPU_R5500: case CPU_NEVADA: case CPU_4KC: case CPU_4KEC: diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 1417c6494858..48060c635acd 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -172,8 +172,9 @@ static void __cpuinit set_prefetch_parameters(void) */ cache_line_size = cpu_dcache_line_size(); switch (current_cpu_type()) { + case CPU_R5500: case CPU_TX49XX: - /* TX49 supports only Pref_Load */ + /* These processors only support the Pref_Load. */ pref_bias_copy_load = 256; break; diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 42942038d0fd..f335cf6cdd78 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -318,6 +318,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_BCM4710: case CPU_LOONGSON2: case CPU_CAVIUM_OCTEON: + case CPU_R5500: if (m4kc_tlbp_war()) uasm_i_nop(p); tlbw(p); From dc58f81346787c82ac47aef1be911ed9edf16024 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 4 Mar 2009 23:45:44 +0900 Subject: [PATCH 14/71] MIPS: TXx9: update defconfigs Enable following features: * MTD (PHYSMAP) * LED (LEDS_GPIO) * RBTX4939 * 7SEGLED * IDE (IDE_TX4938, IDE_TX4939) * SMC91X * RTC_DRV_TX4939 Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/configs/jmr3927_defconfig | 265 +++++++++++++++------- arch/mips/configs/rbtx49xx_defconfig | 319 ++++++++++++++++++++++----- 2 files changed, 447 insertions(+), 137 deletions(-) diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 9d5bd2a0af3d..5380f1f582d9 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Fri Jul 11 23:01:36 2008 +# Linux kernel version: 2.6.29-rc7 +# Wed Mar 4 23:07:16 2009 # CONFIG_MIPS=y @@ -18,8 +18,10 @@ CONFIG_MIPS=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_MACH_EMMA is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set @@ -39,7 +41,11 @@ CONFIG_MIPS=y # CONFIG_SNI_RM is not set CONFIG_MACH_TX39XX=y # CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_JMR3927=y CONFIG_SOC_TX3927=y # CONFIG_TOSHIBA_FPCIB0 is not set @@ -54,12 +60,14 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_CEVT_TXX9=y CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y @@ -87,6 +95,7 @@ CONFIG_CPU_TX39XX=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -94,6 +103,7 @@ CONFIG_CPU_TX39XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_TX39XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y @@ -117,14 +127,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -# CONFIG_TICK_ONESHOT is not set +CONFIG_UNEVICTABLE_LRU=y # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -159,6 +167,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set @@ -171,7 +188,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -188,26 +204,23 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -221,7 +234,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -231,12 +244,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set CONFIG_MMU=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y @@ -245,15 +261,12 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -293,6 +306,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -302,14 +316,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -323,7 +332,89 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set @@ -336,6 +427,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -361,7 +453,6 @@ CONFIG_HAVE_IDE=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -383,6 +474,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -392,6 +486,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -399,6 +494,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -406,7 +504,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -415,9 +512,11 @@ CONFIG_TC35815=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -428,6 +527,10 @@ CONFIG_TC35815=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -440,27 +543,7 @@ CONFIG_TC35815=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -517,16 +600,22 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + # # SPI GPIO expanders: # @@ -542,6 +631,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set CONFIG_TXX9_WDT=y # @@ -549,18 +639,21 @@ CONFIG_TXX9_WDT=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -591,16 +684,26 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -626,27 +729,34 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -676,28 +786,17 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y @@ -726,7 +825,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -734,15 +842,18 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index 83d5c58662c8..1efe977497dd 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Fri Jul 11 23:03:21 2008 +# Linux kernel version: 2.6.29-rc7 +# Wed Mar 4 23:08:06 2009 # CONFIG_MIPS=y @@ -18,8 +18,10 @@ CONFIG_MIPS=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set +# CONFIG_MACH_EMMA is not set # CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set @@ -39,20 +41,28 @@ CONFIG_MIPS=y # CONFIG_SNI_RM is not set # CONFIG_MACH_TX39XX is not set CONFIG_MACH_TX49XX=y +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_RBTX4927=y CONFIG_TOSHIBA_RBTX4938=y +CONFIG_TOSHIBA_RBTX4939=y CONFIG_SOC_TX4927=y CONFIG_SOC_TX4938=y +CONFIG_SOC_TX4939=y +CONFIG_TXX9_7SEGLED=y # CONFIG_TOSHIBA_FPCIB0 is not set CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y # # Multiplex Pin Select # -CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y +# CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set +CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP=y CONFIG_PCI_TX4927=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set @@ -64,14 +74,18 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y CONFIG_CEVT_R4K=y CONFIG_CEVT_TXX9=y +CONFIG_CSRC_R4K_LIB=y CONFIG_CSRC_R4K=y CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y # CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y @@ -100,6 +114,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 CONFIG_CPU_TX49XX=y # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -107,6 +122,7 @@ CONFIG_CPU_TX49XX=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_HAS_CPU_TX49XX=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y @@ -134,13 +150,12 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -176,6 +191,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -190,7 +214,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -207,30 +230,26 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set -# CONFIG_MODULE_UNLOAD is not set +CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -244,7 +263,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -254,12 +274,15 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set CONFIG_MMU=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y @@ -268,15 +291,12 @@ CONFIG_TRAD_SIGNALS=y # CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -318,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -327,14 +348,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -348,7 +364,90 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set @@ -365,9 +464,60 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_TIMINGS=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDE_TX4938=y +CONFIG_BLK_DEV_IDE_TX4939=y +CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support @@ -390,7 +540,6 @@ CONFIG_HAVE_IDE=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -412,15 +561,19 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +CONFIG_SMC91X=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set @@ -429,6 +582,9 @@ CONFIG_NE2000=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -436,7 +592,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -445,9 +600,11 @@ CONFIG_TC35815=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -458,6 +615,10 @@ CONFIG_TC35815=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -502,6 +663,7 @@ CONFIG_SERIAL_TXX9_CONSOLE=y CONFIG_SERIAL_TXX9_STDSERIAL=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -517,26 +679,34 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set CONFIG_SPI_TXX9=y # # SPI Protocol Masters # -CONFIG_EEPROM_AT25=y # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # -# GPIO Support +# Memory mapped GPIO expanders: # # # I2C GPIO expanders: # +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set @@ -550,6 +720,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set CONFIG_TXX9_WDT=m # @@ -557,18 +728,21 @@ CONFIG_TXX9_WDT=m # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -599,15 +773,27 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_GPIO=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -628,35 +814,47 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set CONFIG_RTC_DRV_RS5C348=y +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set CONFIG_RTC_DRV_DS1742=y # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +CONFIG_RTC_DRV_TX4939=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -687,30 +885,19 @@ CONFIG_GENERIC_ACL=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set +# CONFIG_MISC_FILESYSTEMS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -740,7 +927,16 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" # @@ -748,15 +944,18 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set From 0a7c808fccc86418acf0e0b4b119094fb56af952 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 11 Mar 2009 21:08:50 +0100 Subject: [PATCH 15/71] MIPS: IP27: Enable RAID5 module Signed-off-by: Ralf Baechle --- arch/mips/configs/ip27_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index f2baea3039bb..0208723adf28 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -512,7 +512,7 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m +CONFIG_MD_RAID456=y CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m From 363911d027d1de1c6df79eb3f487f5476b9619f4 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Thu, 12 Mar 2009 03:23:48 +0000 Subject: [PATCH 16/71] Squashfs: Valid filesystems are flagged as bad by the corrupted fs patch The corrupted filesystem patch added a check against zlib trying to output too much data in the presence of data corruption. This check triggered if zlib_inflate asked to be called again (Z_OK) with avail_out == 0 and no more output buffers available. This check proves to be rather dumb, as it incorrectly catches the case where zlib has generated all the output, but there are still input bytes to be processed. This patch does a number of things. It removes the original check and replaces it with code to not move to the next output buffer if there are no more output buffers available, relying on zlib to error if it wants an extra output buffer in the case of data corruption. It also replaces the Z_NO_FLUSH flag with the more correct Z_SYNC_FLUSH flag, and makes the error messages more understandable to non-technical users. Signed-off-by: Phillip Lougher Reported-by: Stefan Lippers-Hollmann --- fs/squashfs/block.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-) diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c index 321728f48f2d..2a7960310349 100644 --- a/fs/squashfs/block.c +++ b/fs/squashfs/block.c @@ -184,15 +184,7 @@ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index, offset = 0; } - if (msblk->stream.avail_out == 0) { - if (page == pages) { - ERROR("zlib_inflate tried to " - "decompress too much data, " - "expected %d bytes. Zlib " - "data probably corrupt\n", - srclength); - goto release_mutex; - } + if (msblk->stream.avail_out == 0 && page < pages) { msblk->stream.next_out = buffer[page++]; msblk->stream.avail_out = PAGE_CACHE_SIZE; } @@ -209,25 +201,20 @@ int squashfs_read_data(struct super_block *sb, void **buffer, u64 index, zlib_init = 1; } - zlib_err = zlib_inflate(&msblk->stream, Z_NO_FLUSH); + zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH); if (msblk->stream.avail_in == 0 && k < b) put_bh(bh[k++]); } while (zlib_err == Z_OK); if (zlib_err != Z_STREAM_END) { - ERROR("zlib_inflate returned unexpected result" - " 0x%x, srclength %d, avail_in %d," - " avail_out %d\n", zlib_err, srclength, - msblk->stream.avail_in, - msblk->stream.avail_out); + ERROR("zlib_inflate error, data probably corrupt\n"); goto release_mutex; } zlib_err = zlib_inflateEnd(&msblk->stream); if (zlib_err != Z_OK) { - ERROR("zlib_inflateEnd returned unexpected result 0x%x," - " srclength %d\n", zlib_err, srclength); + ERROR("zlib_inflate error, data probably corrupt\n"); goto release_mutex; } length = msblk->stream.total_out; From 76e6eee03353f01bfca707d4dbb1f10a4ee27dc0 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 12 Mar 2009 14:35:43 -0600 Subject: [PATCH 17/71] cpumask: tsk_cpumask for accessing the struct task_struct's cpus_allowed. This allows us to change the representation (to a dangling bitmap or cpumask_var_t) without breaking all the callers: they can use tsk_cpumask() now and won't see a difference as the changes roll into linux-next. Signed-off-by: Rusty Russell --- include/linux/sched.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/sched.h b/include/linux/sched.h index 8c216e057c94..011db2f4c94c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1419,6 +1419,9 @@ struct task_struct { #endif }; +/* Future-safe accessor for struct task_struct's cpus_allowed. */ +#define tsk_cpumask(tsk) (&(tsk)->cpus_allowed) + /* * Priority of a process goes from 0..MAX_PRIO-1, valid RT * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH From 45e575ab9bfada5a5ef1b6174f8e749b1ecf0864 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 12 Mar 2009 14:35:44 -0600 Subject: [PATCH 18/71] cpumask: mm_cpumask for accessing the struct mm_struct's cpu_vm_mask. This allows us to change the representation (to a dangling bitmap or cpumask_var_t) without breaking all the callers: they can use mm_cpumask() now and won't see a difference as the changes roll into linux-next. Signed-off-by: Rusty Russell --- include/linux/mm_types.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 92915e81443f..d84feb7bdbf0 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -276,4 +276,7 @@ struct mm_struct { #endif }; +/* Future-safe accessor for struct mm_struct's cpu_vm_mask. */ +#define mm_cpumask(mm) (&(mm)->cpu_vm_mask) + #endif /* _LINUX_MM_TYPES_H */ From 9fa7266c2f0cdfcb09eacba2d3624bec7df78641 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 10:34:45 +0000 Subject: [PATCH 19/71] x86: remove leftover unwind annotations Impact: cleanup These got left in needlessly when ret_from_fork got simplified. Signed-off-by: Jan Beulich LKML-Reference: <49B8F355.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_64.S | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 7ba4621c0dfa..54866bb5d38c 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -416,7 +416,6 @@ ENTRY(ret_from_fork) GET_THREAD_INFO(%rcx) - CFI_REMEMBER_STATE RESTORE_REST testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread? @@ -428,7 +427,6 @@ ENTRY(ret_from_fork) RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET jmp ret_from_sys_call # go to the SYSRET fastpath - CFI_RESTORE_STATE CFI_ENDPROC END(ret_from_fork) From c2810188c1b810c68139608a207befae0a4f1e69 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 10:38:55 +0000 Subject: [PATCH 20/71] x86-64: move save_paranoid into .kprobes.text Impact: mark save_paranoid as non-kprobe-able code This appears to be necessary as the function gets called from kprobes-unsafe exception handling stubs (i.e. which themselves live in .kprobes.text). Signed-off-by: Jan Beulich LKML-Reference: <49B8F44F.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_64.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 54866bb5d38c..a331ec38af9e 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -368,6 +368,7 @@ ENTRY(save_rest) END(save_rest) /* save complete stack frame */ + .pushsection .kprobes.text, "ax" ENTRY(save_paranoid) XCPT_FRAME 1 RDI+8 cld @@ -396,6 +397,7 @@ ENTRY(save_paranoid) 1: ret CFI_ENDPROC END(save_paranoid) + .popsection /* * A newly forked process directly context switches into this address. From dd1ef4ec4721ddc0a1f2b73a4f67930cb320665c Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 10:47:13 +0000 Subject: [PATCH 21/71] x86-64: remove unnecessary spill/reload of rbx from memcpy Impact: micro-optimization This should slightly improve its performance. Signed-off-by: Jan Beulich LKML-Reference: <49B8F641.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/lib/memcpy_64.S | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index c22981fa2f3a..10c067694af4 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -33,9 +33,6 @@ ENDPROC(memcpy_c) ENTRY(__memcpy) ENTRY(memcpy) CFI_STARTPROC - pushq %rbx - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rbx, 0 movq %rdi,%rax movl %edx,%ecx @@ -102,11 +99,7 @@ ENTRY(memcpy) jnz .Lloop_1 .Lende: - popq %rbx - CFI_ADJUST_CFA_OFFSET -8 - CFI_RESTORE rbx ret -.Lfinal: CFI_ENDPROC ENDPROC(memcpy) ENDPROC(__memcpy) From f3b6eaf0149186ad0637512ec363582c91e06ee6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 12 Mar 2009 12:20:17 +0100 Subject: [PATCH 22/71] x86: memcpy, clean up Impact: cleanup Make this file more readable by bringing it more in line with the usual kernel style. Signed-off-by: Ingo Molnar --- arch/x86/lib/memcpy_64.S | 136 +++++++++++++++++++++++---------------- 1 file changed, 81 insertions(+), 55 deletions(-) diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index 10c067694af4..ad5441ed1b57 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -1,30 +1,38 @@ /* Copyright 2002 Andi Kleen */ #include -#include + #include +#include /* * memcpy - Copy a memory block. * - * Input: - * rdi destination - * rsi source - * rdx count - * + * Input: + * rdi destination + * rsi source + * rdx count + * * Output: * rax original destination - */ + */ +/* + * memcpy_c() - fast string ops (REP MOVSQ) based variant. + * + * Calls to this get patched into the kernel image via the + * alternative instructions framework: + */ ALIGN memcpy_c: CFI_STARTPROC - movq %rdi,%rax - movl %edx,%ecx - shrl $3,%ecx - andl $7,%edx + movq %rdi, %rax + + movl %edx, %ecx + shrl $3, %ecx + andl $7, %edx rep movsq - movl %edx,%ecx + movl %edx, %ecx rep movsb ret CFI_ENDPROC @@ -33,92 +41,110 @@ ENDPROC(memcpy_c) ENTRY(__memcpy) ENTRY(memcpy) CFI_STARTPROC - movq %rdi,%rax - movl %edx,%ecx - shrl $6,%ecx + /* + * Put the number of full 64-byte blocks into %ecx. + * Tail portion is handled at the end: + */ + movq %rdi, %rax + movl %edx, %ecx + shrl $6, %ecx jz .Lhandle_tail .p2align 4 .Lloop_64: + /* + * We decrement the loop index here - and the zero-flag is + * checked at the end of the loop (instructions inbetween do + * not change the zero flag): + */ decl %ecx - movq (%rsi),%r11 - movq 8(%rsi),%r8 + /* + * Move in blocks of 4x16 bytes: + */ + movq 0*8(%rsi), %r11 + movq 1*8(%rsi), %r8 + movq %r11, 0*8(%rdi) + movq %r8, 1*8(%rdi) - movq %r11,(%rdi) - movq %r8,1*8(%rdi) + movq 2*8(%rsi), %r9 + movq 3*8(%rsi), %r10 + movq %r9, 2*8(%rdi) + movq %r10, 3*8(%rdi) - movq 2*8(%rsi),%r9 - movq 3*8(%rsi),%r10 + movq 4*8(%rsi), %r11 + movq 5*8(%rsi), %r8 + movq %r11, 4*8(%rdi) + movq %r8, 5*8(%rdi) - movq %r9,2*8(%rdi) - movq %r10,3*8(%rdi) + movq 6*8(%rsi), %r9 + movq 7*8(%rsi), %r10 + movq %r9, 6*8(%rdi) + movq %r10, 7*8(%rdi) - movq 4*8(%rsi),%r11 - movq 5*8(%rsi),%r8 + leaq 64(%rsi), %rsi + leaq 64(%rdi), %rdi - movq %r11,4*8(%rdi) - movq %r8,5*8(%rdi) - - movq 6*8(%rsi),%r9 - movq 7*8(%rsi),%r10 - - movq %r9,6*8(%rdi) - movq %r10,7*8(%rdi) - - leaq 64(%rsi),%rsi - leaq 64(%rdi),%rdi jnz .Lloop_64 .Lhandle_tail: - movl %edx,%ecx - andl $63,%ecx - shrl $3,%ecx + movl %edx, %ecx + andl $63, %ecx + shrl $3, %ecx jz .Lhandle_7 + .p2align 4 .Lloop_8: decl %ecx - movq (%rsi),%r8 - movq %r8,(%rdi) - leaq 8(%rdi),%rdi - leaq 8(%rsi),%rsi + movq (%rsi), %r8 + movq %r8, (%rdi) + leaq 8(%rdi), %rdi + leaq 8(%rsi), %rsi jnz .Lloop_8 .Lhandle_7: - movl %edx,%ecx - andl $7,%ecx - jz .Lende + movl %edx, %ecx + andl $7, %ecx + jz .Lend + .p2align 4 .Lloop_1: - movb (%rsi),%r8b - movb %r8b,(%rdi) + movb (%rsi), %r8b + movb %r8b, (%rdi) incq %rdi incq %rsi decl %ecx jnz .Lloop_1 -.Lende: +.Lend: ret CFI_ENDPROC ENDPROC(memcpy) ENDPROC(__memcpy) - /* Some CPUs run faster using the string copy instructions. - It is also a lot simpler. Use this when possible */ + /* + * Some CPUs run faster using the string copy instructions. + * It is also a lot simpler. Use this when possible: + */ - .section .altinstr_replacement,"ax" + .section .altinstr_replacement, "ax" 1: .byte 0xeb /* jmp */ .byte (memcpy_c - memcpy) - (2f - 1b) /* offset */ 2: .previous - .section .altinstructions,"a" + + .section .altinstructions, "a" .align 8 .quad memcpy .quad 1b .byte X86_FEATURE_REP_GOOD - /* Replace only beginning, memcpy is used to apply alternatives, so it - * is silly to overwrite itself with nops - reboot is only outcome... */ + + /* + * Replace only beginning, memcpy is used to apply alternatives, + * so it is silly to overwrite itself with nops - reboot is the + * only outcome... + */ .byte 2b - 1b .byte 2b - 1b .previous From 6a5c05f002c3e4f24887a5fe8e7df757d339d368 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 11:54:54 +0000 Subject: [PATCH 23/71] x86: fix HYPERVISOR_update_descriptor() Impact: fix potential oops during app-initiated LDT manipulation The underlying hypercall has differing argument requirements on 32- and 64-bit. Signed-off-by: Jan Beulich Acked-by: Jeremy Fitzhardinge LKML-Reference: <49B9061E.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/xen/hypercall.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index 5e79ca694326..9c371e4a9fa6 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -296,6 +296,8 @@ HYPERVISOR_get_debugreg(int reg) static inline int HYPERVISOR_update_descriptor(u64 ma, u64 desc) { + if (sizeof(u64) == sizeof(long)) + return _hypercall2(int, update_descriptor, ma, desc); return _hypercall4(int, update_descriptor, ma, ma>>32, desc, desc>>32); } From 821508d4ef7920283b960057903505fed609fd16 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 12:09:57 +0000 Subject: [PATCH 24/71] x86: move a few device initialization objects into .devinit.rodata Impact: debuggability and micro-optimization Putting whatever is possible into the (final) .rodata section increases the likelihood of catching memory corruption bugs early, and reduces false cache line sharing. Signed-off-by: Jan Beulich LKML-Reference: <49B909A5.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/pci/common.c | 4 ++-- arch/x86/pci/fixup.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 82d22fc601ae..8c362b96b644 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -90,7 +90,7 @@ static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d) return 0; } -static struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitdata = { +static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitconst = { /* * Systems where PCI IO resource ISA alignment can be skipped * when the ISA enable bit in the bridge control is not set @@ -183,7 +183,7 @@ static int __devinit assign_all_busses(const struct dmi_system_id *d) } #endif -static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { +static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = { #ifdef __i386__ /* * Laptops which need pci=assign-busses to see Cardbus cards diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 7d388d5cf548..9c49919e4d1c 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -356,7 +356,7 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev) DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); -static struct dmi_system_id __devinitdata msi_k8t_dmi_table[] = { +static const struct dmi_system_id __devinitconst msi_k8t_dmi_table[] = { { .ident = "MSI-K8T-Neo2Fir", .matches = { @@ -413,7 +413,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, */ static u16 toshiba_line_size; -static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = { +static const struct dmi_system_id __devinitconst toshiba_ohci1394_dmi_table[] = { { .ident = "Toshiba PS5 based laptop", .matches = { From 02dde8b45c5460794b9052d7c12939fe3eb63c2c Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 12:08:49 +0000 Subject: [PATCH 25/71] x86: move various CPU initialization objects into .cpuinit.rodata Impact: debuggability and micro-optimization Putting whatever is possible into the (final) .rodata section increases the likelihood of catching memory corruption bugs early, and reduces false cache line sharing. Signed-off-by: Jan Beulich LKML-Reference: <49B90961.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/addon_cpuid_features.c | 2 +- arch/x86/kernel/cpu/amd.c | 2 +- arch/x86/kernel/cpu/centaur.c | 2 +- arch/x86/kernel/cpu/centaur_64.c | 2 +- arch/x86/kernel/cpu/common.c | 20 ++++++++++---------- arch/x86/kernel/cpu/cpu.h | 11 ++++++----- arch/x86/kernel/cpu/cyrix.c | 16 ++++++++-------- arch/x86/kernel/cpu/intel.c | 2 +- arch/x86/kernel/cpu/intel_cacheinfo.c | 8 ++++---- arch/x86/kernel/cpu/transmeta.c | 2 +- arch/x86/kernel/cpu/umc.c | 2 +- arch/x86/kernel/mmconf-fam10h_64.c | 2 +- 12 files changed, 36 insertions(+), 35 deletions(-) diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index 6882a735d9c0..8220ae69849d 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -29,7 +29,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) u32 regs[4]; const struct cpuid_bit *cb; - static const struct cpuid_bit cpuid_bits[] = { + static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 }, { 0, 0, 0, 0 } }; diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index f47df59016c5..7e4a459daa64 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -502,7 +502,7 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int } #endif -static struct cpu_dev amd_cpu_dev __cpuinitdata = { +static const struct cpu_dev __cpuinitconst amd_cpu_dev = { .c_vendor = "AMD", .c_ident = { "AuthenticAMD" }, #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index 89bfdd9cacc6..983e0830f0da 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -468,7 +468,7 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size) return size; } -static struct cpu_dev centaur_cpu_dev __cpuinitdata = { +static const struct cpu_dev __cpuinitconst centaur_cpu_dev = { .c_vendor = "Centaur", .c_ident = { "CentaurHauls" }, .c_early_init = early_init_centaur, diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c index a1625f5a1e78..51b09c48c9c7 100644 --- a/arch/x86/kernel/cpu/centaur_64.c +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -25,7 +25,7 @@ static void __cpuinit init_centaur(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); } -static struct cpu_dev centaur_cpu_dev __cpuinitdata = { +static const struct cpu_dev centaur_cpu_dev __cpuinitconst = { .c_vendor = "Centaur", .c_ident = { "CentaurHauls" }, .c_early_init = early_init_centaur, diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index f8869978bbb7..54cbe7690f93 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -70,7 +70,7 @@ cpumask_t cpu_sibling_setup_map; #endif /* CONFIG_X86_32 */ -static struct cpu_dev *this_cpu __cpuinitdata; +static const struct cpu_dev *this_cpu __cpuinitdata; DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { #ifdef CONFIG_X86_64 @@ -274,9 +274,9 @@ static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn) */ /* Look up CPU names by table lookup. */ -static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) +static const char *__cpuinit table_lookup_model(struct cpuinfo_x86 *c) { - struct cpu_model_info *info; + const struct cpu_model_info *info; if (c->x86_model >= 16) return NULL; /* Range check */ @@ -321,7 +321,7 @@ void switch_to_new_gdt(int cpu) load_percpu_segment(cpu); } -static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; +static const struct cpu_dev *__cpuinitdata cpu_devs[X86_VENDOR_NUM] = {}; static void __cpuinit default_init(struct cpuinfo_x86 *c) { @@ -340,7 +340,7 @@ static void __cpuinit default_init(struct cpuinfo_x86 *c) #endif } -static struct cpu_dev __cpuinitdata default_cpu = { +static const struct cpu_dev __cpuinitconst default_cpu = { .c_init = default_init, .c_vendor = "Unknown", .c_x86_vendor = X86_VENDOR_UNKNOWN, @@ -634,12 +634,12 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c) void __init early_cpu_init(void) { - struct cpu_dev **cdev; + const struct cpu_dev *const *cdev; int count = 0; printk("KERNEL supported cpus:\n"); for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) { - struct cpu_dev *cpudev = *cdev; + const struct cpu_dev *cpudev = *cdev; unsigned int j; if (count >= X86_VENDOR_NUM) @@ -768,7 +768,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) /* If the model name is still unset, do table lookup. */ if (!c->x86_model_id[0]) { - char *p; + const char *p; p = table_lookup_model(c); if (p) strcpy(c->x86_model_id, p); @@ -847,7 +847,7 @@ struct msr_range { unsigned max; }; -static struct msr_range msr_range_array[] __cpuinitdata = { +static const struct msr_range msr_range_array[] __cpuinitconst = { { 0x00000000, 0x00000418}, { 0xc0000000, 0xc000040b}, { 0xc0010000, 0xc0010142}, @@ -894,7 +894,7 @@ __setup("noclflush", setup_noclflush); void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) { - char *vendor = NULL; + const char *vendor = NULL; if (c->x86_vendor < X86_VENDOR_NUM) vendor = this_cpu->c_vendor; diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index de4094a39210..9469ecb5aeb8 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -5,15 +5,15 @@ struct cpu_model_info { int vendor; int family; - char *model_names[16]; + const char *model_names[16]; }; /* attempt to consolidate cpu attributes */ struct cpu_dev { - char * c_vendor; + const char * c_vendor; /* some have two possibilities for cpuid string */ - char * c_ident[2]; + const char * c_ident[2]; struct cpu_model_info c_models[4]; @@ -25,11 +25,12 @@ struct cpu_dev { }; #define cpu_dev_register(cpu_devX) \ - static struct cpu_dev *__cpu_dev_##cpu_devX __used \ + static const struct cpu_dev *const __cpu_dev_##cpu_devX __used \ __attribute__((__section__(".x86_cpu_dev.init"))) = \ &cpu_devX; -extern struct cpu_dev *__x86_cpu_dev_start[], *__x86_cpu_dev_end[]; +extern const struct cpu_dev *const __x86_cpu_dev_start[], + *const __x86_cpu_dev_end[]; extern void display_cacheinfo(struct cpuinfo_x86 *c); diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index ffd0f5ed071a..593171e967ef 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -61,23 +61,23 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) */ static unsigned char Cx86_dir0_msb __cpuinitdata = 0; -static char Cx86_model[][9] __cpuinitdata = { +static const char __cpuinitconst Cx86_model[][9] = { "Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ", "M II ", "Unknown" }; -static char Cx486_name[][5] __cpuinitdata = { +static const char __cpuinitconst Cx486_name[][5] = { "SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx", "SRx2", "DRx2" }; -static char Cx486S_name[][4] __cpuinitdata = { +static const char __cpuinitconst Cx486S_name[][4] = { "S", "S2", "Se", "S2e" }; -static char Cx486D_name[][4] __cpuinitdata = { +static const char __cpuinitconst Cx486D_name[][4] = { "DX", "DX2", "?", "?", "?", "DX4" }; static char Cx86_cb[] __cpuinitdata = "?.5x Core/Bus Clock"; -static char cyrix_model_mult1[] __cpuinitdata = "12??43"; -static char cyrix_model_mult2[] __cpuinitdata = "12233445"; +static const char __cpuinitconst cyrix_model_mult1[] = "12??43"; +static const char __cpuinitconst cyrix_model_mult2[] = "12233445"; /* * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old @@ -435,7 +435,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c) } } -static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { +static const struct cpu_dev __cpuinitconst cyrix_cpu_dev = { .c_vendor = "Cyrix", .c_ident = { "CyrixInstead" }, .c_early_init = early_init_cyrix, @@ -446,7 +446,7 @@ static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { cpu_dev_register(cyrix_cpu_dev); -static struct cpu_dev nsc_cpu_dev __cpuinitdata = { +static const struct cpu_dev __cpuinitconst nsc_cpu_dev = { .c_vendor = "NSC", .c_ident = { "Geode by NSC" }, .c_init = init_nsc, diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 191117f1ad51..968f15129ed8 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -410,7 +410,7 @@ static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned i } #endif -static struct cpu_dev intel_cpu_dev __cpuinitdata = { +static const struct cpu_dev __cpuinitconst intel_cpu_dev = { .c_vendor = "Intel", .c_ident = { "GenuineIntel" }, #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 7293508d8f5c..c471eb1a389c 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -32,7 +32,7 @@ struct _cache_table }; /* all the cache descriptor types we care about (no TLB or trace cache entries) */ -static struct _cache_table cache_table[] __cpuinitdata = +static const struct _cache_table __cpuinitconst cache_table[] = { { 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */ { 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */ @@ -206,15 +206,15 @@ union l3_cache { unsigned val; }; -static unsigned short assocs[] __cpuinitdata = { +static const unsigned short __cpuinitconst assocs[] = { [1] = 1, [2] = 2, [4] = 4, [6] = 8, [8] = 16, [0xa] = 32, [0xb] = 48, [0xc] = 64, [0xf] = 0xffff // ?? }; -static unsigned char levels[] __cpuinitdata = { 1, 1, 2, 3 }; -static unsigned char types[] __cpuinitdata = { 1, 2, 3, 3 }; +static const unsigned char __cpuinitconst levels[] = { 1, 1, 2, 3 }; +static const unsigned char __cpuinitconst types[] = { 1, 2, 3, 3 }; static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c index 52b3fefbd5af..bb62b3e5caad 100644 --- a/arch/x86/kernel/cpu/transmeta.c +++ b/arch/x86/kernel/cpu/transmeta.c @@ -98,7 +98,7 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) #endif } -static struct cpu_dev transmeta_cpu_dev __cpuinitdata = { +static const struct cpu_dev __cpuinitconst transmeta_cpu_dev = { .c_vendor = "Transmeta", .c_ident = { "GenuineTMx86", "TransmetaCPU" }, .c_early_init = early_init_transmeta, diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c index e777f79e0960..fd2c37bf7acb 100644 --- a/arch/x86/kernel/cpu/umc.c +++ b/arch/x86/kernel/cpu/umc.c @@ -8,7 +8,7 @@ * so no special init takes place. */ -static struct cpu_dev umc_cpu_dev __cpuinitdata = { +static const struct cpu_dev __cpuinitconst umc_cpu_dev = { .c_vendor = "UMC", .c_ident = { "UMC UMC UMC" }, .c_models = { diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index 666e43df51f9..712d15fdc416 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -226,7 +226,7 @@ static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d) return 0; } -static struct dmi_system_id __devinitdata mmconf_dmi_table[] = { +static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = { { .callback = set_check_enable_amd_mmconf, .ident = "Sun Microsystems Machine", From 3bb9db79235e19dbb18ba6f4a428a97c69115319 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 12 Mar 2009 13:36:38 +0100 Subject: [PATCH 26/71] hwmon: (abituguru3) Fix I/O error handling Fix a logic bug reported by Roel Kluin, by rewriting the error handling code in a clearer way. Signed-off-by: Jean Delvare Cc: Roel Kluin Acked-by: Alistair John Strachan Acked-by: Hans de Goede --- drivers/hwmon/abituguru3.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index e52b38806d03..ad2b3431b725 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -760,8 +760,11 @@ static int abituguru3_read_increment_offset(struct abituguru3_data *data, for (i = 0; i < offset_count; i++) if ((x = abituguru3_read(data, bank, offset + i, count, - buf + i * count)) != count) - return i * count + (i && (x < 0)) ? 0 : x; + buf + i * count)) != count) { + if (x < 0) + return x; + return i * count + x; + } return i * count; } From 1a51e068c900eb6ea23ce597361ebf3b19a57b23 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 12 Mar 2009 13:36:38 +0100 Subject: [PATCH 27/71] hwmon: (lm90) Document support for the MAX6648/6692 chips Update documentation to prevent further confusion/duplication. Signed-off-by: Darrick J. Wong Signed-off-by: Jean Delvare --- Documentation/hwmon/lm90 | 10 ++++++++++ drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/lm90.c | 8 ++++---- 3 files changed, 16 insertions(+), 6 deletions(-) diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 0e8411710238..93d8e3d55150 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -42,6 +42,11 @@ Supported chips: Addresses scanned: I2C 0x4e Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + * Maxim MAX6648 + Prefix: 'max6646' + Addresses scanned: I2C 0x4c + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 * Maxim MAX6649 Prefix: 'max6646' Addresses scanned: I2C 0x4c @@ -74,6 +79,11 @@ Supported chips: 0x4c, 0x4d and 0x4e Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 + * Maxim MAX6692 + Prefix: 'max6646' + Addresses scanned: I2C 0x4c + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 Author: Jean Delvare diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index b84bf066879b..b4eea0292c1a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -543,8 +543,8 @@ config SENSORS_LM90 help If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, and Maxim - MAX6646, MAX6647, MAX6649, MAX6657, MAX6658, MAX6659, MAX6680 and - MAX6681 sensor chips. + MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, + MAX6680, MAX6681 and MAX6692 sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 96a701866726..1aff7575799d 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -32,10 +32,10 @@ * supported by this driver. These chips lack the remote temperature * offset feature. * - * This driver also supports the MAX6646, MAX6647 and MAX6649 chips - * made by Maxim. These are again similar to the LM86, but they use - * unsigned temperature values and can report temperatures from 0 to - * 145 degrees. + * This driver also supports the MAX6646, MAX6647, MAX6648, MAX6649 and + * MAX6692 chips made by Maxim. These are again similar to the LM86, + * but they use unsigned temperature values and can report temperatures + * from 0 to 145 degrees. * * This driver also supports the MAX6680 and MAX6681, two other sensor * chips made by Maxim. These are quite similar to the other Maxim From e267d25005c861fe6afda343f044536342c9f8b4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 12 Mar 2009 13:36:39 +0100 Subject: [PATCH 28/71] hwmon: (it87) Properly decode -128 degrees C temperature The it87 driver is reporting -128 degrees C as +128 degrees C. That's not a terribly likely temperature value but let's still get it right, especially when it simplifies the code. Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 95a99c590da2..9157247fed8e 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -213,7 +213,7 @@ static inline u16 FAN16_TO_REG(long rpm) #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\ ((val)+500)/1000),-128,127)) -#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) +#define TEMP_FROM_REG(val) ((val) * 1000) #define PWM_TO_REG(val) ((val) >> 1) #define PWM_FROM_REG(val) (((val)&0x7f) << 1) @@ -267,9 +267,9 @@ struct it87_data { u8 has_fan; /* Bitfield, fans enabled */ u16 fan[5]; /* Register values, possibly combined */ u16 fan_min[5]; /* Register values, possibly combined */ - u8 temp[3]; /* Register value */ - u8 temp_high[3]; /* Register value */ - u8 temp_low[3]; /* Register value */ + s8 temp[3]; /* Register value */ + s8 temp_high[3]; /* Register value */ + s8 temp_low[3]; /* Register value */ u8 sensor; /* Register value */ u8 fan_div[3]; /* Register encoding, shifted right */ u8 vid; /* Register encoding, combined */ From 51b3e2700177b89fdb0d985926ce777a7ad52b15 Mon Sep 17 00:00:00 2001 From: Andrew Klossner Date: Thu, 12 Mar 2009 13:36:39 +0100 Subject: [PATCH 29/71] hwmon: (f75375s) Remove unnecessary and confusing initialization f75375_probe calls i2c_get_clientdata to initialize the data pointer, but there isn't yet any client data to get, and the value is never used before the variable is assigned a new value seven lines later. The call doesn't hurt anything and wastes only a couple of cycles. The reason to fix it is because this module serves as an example to hackers writing new hwmon drivers, and this part of the example is confusing. Signed-off-by: Andrew Klossner Signed-off-by: Jean Delvare --- drivers/hwmon/f75375s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 1692de369969..18a1ba888165 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -617,7 +617,7 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data, static int f75375_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct f75375_data *data = i2c_get_clientdata(client); + struct f75375_data *data; struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data; int err; From 649426efcfbc67a8b033497151816cbac9fd0cfa Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 5 Mar 2009 13:57:28 -0500 Subject: [PATCH 30/71] PCI: Add PCI quirk to disable L0s ASPM state for 82575 and 82598 This patch is intended to disable L0s ASPM link state for 82598 (ixgbe) parts due to the fact that it is possible to corrupt TX data when coming back out of L0s on some systems. The workaround had been added for 82575 (igb) previously, but did not use the ASPM api. This quirk uses the ASPM api to prevent the ASPM subsystem from re-enabling the L0s state. Instead of adding the fix in igb to the ixgbe driver as well it was decided to move it into a pci quirk. It is necessary to move the fix out of the driver and into a pci quirk in order to prevent the issue from occuring prior to driver load to handle the possibility of the device being passed to a VM via direct assignment. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher CC: Jesse Barnes Signed-off-by: Matthew Wilcox --- drivers/pci/quirks.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f20d55368edb..1a7c48d71dc7 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "pci.h" int isa_dma_bridge_buggy; @@ -1749,6 +1750,30 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); +/* + * The 82575 and 82598 may experience data corruption issues when transitioning + * out of L0S. To prevent this we need to disable L0S on the pci-e link + */ +static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev) +{ + dev_info(&dev->dev, "Disabling L0s\n"); + pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); + static void __devinit fixup_rev1_53c810(struct pci_dev* dev) { /* rev 1 ncr53c810 chips don't set the class at all which means From cb4cb4ac7338c28b047760be187355ed9c783e72 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 5 Mar 2009 19:28:40 -0700 Subject: [PATCH 31/71] PCIe: AER: during disable, check subordinate before walking Commit 47a8b0cc (Enable PCIe AER only after checking firmware support) wants to walk the PCI bus in the remove path to disable AER, and calls pci_walk_bus for downstream bridges. Unfortunately, in the remove path, we remove devices and bridges in a depth-first manner, starting with the furthest downstream bridge and working our way backwards. The furthest downstream bridges will not have a dev->subordinate, and we hit a NULL deref in pci_walk_bus. Check for dev->subordinate first before attempting to walk the PCI hierarchy below us. Acked-by: Andrew Patterson Signed-off-by: Alex Chiang Signed-off-by: Matthew Wilcox --- drivers/pci/pcie/aer/aerdrv_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index d0c973685868..382575007382 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -133,6 +133,9 @@ static void set_downstream_devices_error_reporting(struct pci_dev *dev, bool enable) { set_device_error_reporting(dev, &enable); + + if (!dev->subordinate) + return; pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable); } From 3f3b902ed8147c42a4a9764014c758e6b3f42f51 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 6 Mar 2009 14:39:14 +1100 Subject: [PATCH 32/71] powerpc/pseries: The RPA PCI hotplug driver depends on EEH The RPA PCI hotplug driver calls EEH routines, so should depend on EEH. Also PPC_PSERIES implies PPC64, so remove that. Signed-off-by: Michael Ellerman Signed-off-by: Matthew Wilcox --- drivers/pci/hotplug/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index eacfb13998bb..9aa4fe100a0d 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -143,7 +143,7 @@ config HOTPLUG_PCI_SHPC config HOTPLUG_PCI_RPA tristate "RPA PCI Hotplug driver" - depends on PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE + depends on PPC_PSERIES && EEH && !HOTPLUG_PCI_FAKE help Say Y here if you have a RPA system that supports PCI Hotplug. From 7726c3308a92b4a4c3bd059059498fca0e6f8e48 Mon Sep 17 00:00:00 2001 From: Prakash Punnoor Date: Fri, 6 Mar 2009 00:45:12 +0100 Subject: [PATCH 33/71] pci: don't disable too many HT MSI mapping Prakash's system needs MSI disabled on some bridges, but not all. This seems to be the minimal fix for 2.6.29, but should be replaced during 2.6.30. Signed-off-by: Prakash Punnoor Signed-off-by: Matthew Wilcox --- drivers/pci/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 1a7c48d71dc7..9104671e4b72 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2166,6 +2166,10 @@ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) int pos; int found; + /* Enabling HT MSI mapping on this device breaks MCP51 */ + if (dev->device == 0x270) + return; + /* check if there is HT MSI cap or enabled on this device */ found = ht_check_msi_mapping(dev); From 6a958d5b28e4a180458e0d319d2e4bb5c4b7da3e Mon Sep 17 00:00:00 2001 From: Prakash Punnoor Date: Fri, 6 Mar 2009 10:10:35 +0100 Subject: [PATCH 34/71] pci: Fix typo in message while disabling HT MSI mapping "Enabling" should read "Disabling" Signed-off-by: Prakash Punnoor Signed-off-by: Matthew Wilcox --- drivers/pci/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 9104671e4b72..92b9efe9bcaf 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2122,7 +2122,7 @@ static void __devinit ht_disable_msi_mapping(struct pci_dev *dev) if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, &flags) == 0) { - dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); + dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); pci_write_config_byte(dev, pos + HT_MSI_FLAGS, flags & ~HT_MSI_FLAGS_ENABLE); From d89987193631bf23d1735c55d13a06d4b8d0e9bd Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Sat, 7 Mar 2009 19:35:47 -0700 Subject: [PATCH 35/71] PCIe: portdrv: call pci_disable_device during remove The PCIe port driver calls pci_enable_device() during probe but never calls pci_disable_device() during remove. Cc: stable@kernel.org Signed-off-by: Alex Chiang Signed-off-by: Matthew Wilcox --- drivers/pci/pcie/portdrv_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 248b4db91552..5ea566e20b37 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -103,6 +103,7 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev, static void pcie_portdrv_remove (struct pci_dev *dev) { pcie_port_device_remove(dev); + pci_disable_device(dev); kfree(pci_get_drvdata(dev)); } From f9c5107c2bcad91dd56d23888653d7bfa1a9696e Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 12 Mar 2009 12:50:33 -0700 Subject: [PATCH 36/71] x86: remove additional vestiges of the zImage/bzImage split Impact: cleanup Remove targets that were used for zImage only, and Makefile infrastructure that was there to support the zImage/bzImage split. Reported-by: Paul Bolle LKML-Reference: <1236879901.24144.26.camel@test.thuisdomein> Signed-off-by: H. Peter Anvin --- arch/x86/Makefile | 27 ++++++++------------------- arch/x86/boot/Makefile | 29 ++++++++++++++++------------- 2 files changed, 24 insertions(+), 32 deletions(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 1836191839ee..43bd89c67e3a 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -153,34 +153,23 @@ endif boot := arch/x86/boot -PHONY += zImage bzImage compressed zlilo bzlilo \ - zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install +BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install + +PHONY += bzImage $(BOOT_TARGETS) # Default kernel to build all: bzImage # KBUILD_IMAGE specify target image being built - KBUILD_IMAGE := $(boot)/bzImage -zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage +KBUILD_IMAGE := $(boot)/bzImage -zImage bzImage: vmlinux +bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@ -compressed: zImage - -zlilo bzlilo: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo - -zdisk bzdisk: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk - -fdimage fdimage144 fdimage288 isoimage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ - -install: - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install +$(BOOT_TARGETS): vmlinux + $(Q)$(MAKE) $(build)=$(boot) $@ PHONY += vdso_install vdso_install: @@ -208,4 +197,4 @@ endef CLEAN_FILES += arch/x86/boot/fdimage \ arch/x86/boot/image.iso \ - arch/x86/boot/mtools.conf + arch/x86/boot/mtools.conf \ No newline at end of file diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 57a29fecf6bb..2a3db75b35c3 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -109,9 +109,11 @@ $(obj)/setup.bin: $(obj)/setup.elf FORCE $(obj)/compressed/vmlinux: FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ -# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel +# Set this if you want to pass append arguments to the +# bzdisk/fdimage/isoimage kernel FDARGS = -# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel +# Set this if you want an initrd included with the +# bzdisk/fdimage/isoimage kernel FDINITRD = image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) @@ -120,7 +122,7 @@ $(obj)/mtools.conf: $(src)/mtools.conf.in sed -e 's|@OBJ@|$(obj)|g' < $< > $@ # This requires write access to /dev/fd0 -zdisk: $(BOOTIMAGE) $(obj)/mtools.conf +bzdisk: $(obj)/bzImage $(obj)/mtools.conf MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync syslinux /dev/fd0 ; sync echo '$(image_cmdline)' | \ @@ -128,10 +130,10 @@ zdisk: $(BOOTIMAGE) $(obj)/mtools.conf if [ -f '$(FDINITRD)' ] ; then \ MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \ fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync + MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage a:linux ; sync # These require being root or having syslinux 2.02 or higher installed -fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf +fdimage fdimage144: $(obj)/bzImage $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440 MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync syslinux $(obj)/fdimage ; sync @@ -140,9 +142,9 @@ fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf if [ -f '$(FDINITRD)' ] ; then \ MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \ fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync + MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage v:linux ; sync -fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf +fdimage288: $(obj)/bzImage $(obj)/mtools.conf dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880 MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync syslinux $(obj)/fdimage ; sync @@ -151,9 +153,9 @@ fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf if [ -f '$(FDINITRD)' ] ; then \ MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \ fi - MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync + MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage w:linux ; sync -isoimage: $(BOOTIMAGE) +isoimage: $(obj)/bzImage -rm -rf $(obj)/isoimage mkdir $(obj)/isoimage for i in lib lib64 share end ; do \ @@ -163,7 +165,7 @@ isoimage: $(BOOTIMAGE) fi ; \ if [ $$i = end ] ; then exit 1 ; fi ; \ done - cp $(BOOTIMAGE) $(obj)/isoimage/linux + cp $(obj)/bzImage $(obj)/isoimage/linux echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg if [ -f '$(FDINITRD)' ] ; then \ cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \ @@ -174,12 +176,13 @@ isoimage: $(BOOTIMAGE) isohybrid $(obj)/image.iso 2>/dev/null || true rm -rf $(obj)/isoimage -zlilo: $(BOOTIMAGE) +bzlilo: $(obj)/bzImage if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi - cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz + cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz cp System.map $(INSTALL_PATH)/ if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi install: - sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)" + sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(obj)/bzImage \ + System.map "$(INSTALL_PATH)" From 16a6791934a1077609482dd6c091aa8b4c39a834 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 12 Mar 2009 13:43:14 -0700 Subject: [PATCH 37/71] x86: use targets in the boot Makefile instead of CLEAN_FILES Impact: cleanup Instead of using CLEAN_FILES in arch/x86/Makefile, add generated files to targets in arch/x86/boot/Makefile, so they will get naturally cleaned up by "make clean". Cc: Sam Ravnborg Signed-off-by: H. Peter Anvin --- arch/x86/Makefile | 4 ---- arch/x86/boot/Makefile | 1 + 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 43bd89c67e3a..f05d8c91d9e5 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -194,7 +194,3 @@ define archhelp echo ' FDARGS="..." arguments for the booted kernel' echo ' FDINITRD=file initrd for the booted kernel' endef - -CLEAN_FILES += arch/x86/boot/fdimage \ - arch/x86/boot/image.iso \ - arch/x86/boot/mtools.conf \ No newline at end of file diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index 2a3db75b35c3..fb737ce5888d 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -23,6 +23,7 @@ ROOT_DEV := CURRENT SVGA_MODE := -DSVGA_MODE=NORMAL_VGA targets := vmlinux.bin setup.bin setup.elf bzImage +targets += fdimage fdimage144 fdimage288 image.iso mtools.conf subdir- := compressed setup-y += a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o From 86d6f2bf61eb2a28fa63c0a19330d36226426477 Mon Sep 17 00:00:00 2001 From: Renzo Davoli Date: Thu, 12 Mar 2009 14:31:23 -0700 Subject: [PATCH 38/71] UML on UML fixed: it did not start It is currently impossible to run a user-mode linux machine inside another user-mode linux (UML on UML). It breaks after a few instructions. When it tries to check whether SYSEMU is installed (the inner) UML receives an inconsistent result (from the outer UML). This is the output of a broken attempt: $ ./linux mem=256m ubd0=cow Locating the bottom of the address space ... 0x0 Locating the top of the address space ... 0xc0000000 Core dump limits : soft - 0 hard - NONE Checking that ptrace can change system call numbers...OK Checking ptrace new tags for syscall emulation...unsupported Checking syscall emulation patch for ptrace...check_sysemu : expected SIGTRAP, got status = 256 $ The problem is the following: PTRACE_SYSCALL/SINGLESTEP is currently managed inside arch_ptrace for ARCH=um. PTRACE_SYSEMU/SUSEMU_SINGLESTEP is not captured in arch_ptrace's switch, therefore it is erroneously passed back to ptrace_request (in kernel/ptrace). This simple patch simply forces ptrace to return an error on PTRACE_SYSEMU/SUSEMU_SINGLESTEP as it is unsupported on ARCH=um, and fixes the problem. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Renzo Davoli Reviewed-by: WANG Cong Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/kernel/ptrace.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 15e8b7c4de13..8e3d69e4fcb5 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -64,6 +64,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = poke_user(child, addr, data); break; + case PTRACE_SYSEMU: + case PTRACE_SYSEMU_SINGLESTEP: + ret = -EIO; + break; + /* continue and stop at next (return from) syscall */ case PTRACE_SYSCALL: /* restart after signal. */ From 00699e8472cc0209d57b5c5614bc2ec98e665004 Mon Sep 17 00:00:00 2001 From: "akpm@linux-foundation.org" Date: Thu, 12 Mar 2009 14:31:24 -0700 Subject: [PATCH 39/71] uml: fix WARNING: vmlinux: 'memcpy' exported twice Fix the following warning on x86_64: LD vmlinux.o MODPOST vmlinux.o WARNING: vmlinux: 'memcpy' exported twice. Previous export was in vmlinux For x86_64, this symbol is already exported from arch/um/sys-x86_64/ksyms.c. Reported-by: Boaz Harrosh Signed-off-by: WANG Cong Tested-by: Boaz Harrosh Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/user_syms.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c index 74f49bb9b125..89b48a116a89 100644 --- a/arch/um/os-Linux/user_syms.c +++ b/arch/um/os-Linux/user_syms.c @@ -14,7 +14,6 @@ #undef memset extern size_t strlen(const char *); -extern void *memcpy(void *, const void *, size_t); extern void *memmove(void *, const void *, size_t); extern void *memset(void *, int, size_t); extern int printf(const char *, ...); @@ -24,7 +23,11 @@ extern int printf(const char *, ...); EXPORT_SYMBOL(strstr); #endif +#ifndef __x86_64__ +extern void *memcpy(void *, const void *, size_t); EXPORT_SYMBOL(memcpy); +#endif + EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(printf); From 8d0df7a3d1ecbaf5d5602a59055c8ca993855bed Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 12 Mar 2009 14:31:25 -0700 Subject: [PATCH 40/71] drivers/w1/masters/w1-gpio.c: fix read_bit() W1 master implementations are expected to return 0 or 1 from their read_bit() function. However, not all platforms do return these values from gpio_get_value() - namely PXAs won't. Hence the w1 gpio-master needs to break the result down to 0 or 1 itself. Signed-off-by: Daniel Mack Cc: Ville Syrjala Cc: Evgeniy Polyakov Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/masters/w1-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c index 9e1138a75e8b..a411702413d6 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c @@ -39,7 +39,7 @@ static u8 w1_gpio_read_bit(void *data) { struct w1_gpio_platform_data *pdata = data; - return gpio_get_value(pdata->pin); + return gpio_get_value(pdata->pin) ? 1 : 0; } static int __init w1_gpio_probe(struct platform_device *pdev) From e5bc49ba7439b9726006d031d440cba96819f0f8 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 12 Mar 2009 14:31:28 -0700 Subject: [PATCH 41/71] pipe_rdwr_fasync: fix the error handling to prevent the leak/crash If the second fasync_helper() fails, pipe_rdwr_fasync() returns the error but leaves the file on ->fasync_readers. This was always wrong, but since 233e70f4228e78eb2f80dc6650f65d3ae3dbf17c "saner FASYNC handling on file close" we have the new problem. Because in this case setfl() doesn't set FASYNC bit, __fput() will not do ->fasync(0), and we leak fasync_struct with ->fa_file pointing to the freed file. Signed-off-by: Oleg Nesterov Cc: Al Viro Cc: Andi Kleen Cc: Jonathan Corbet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/pipe.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/pipe.c b/fs/pipe.c index 3a48ba5179d5..14f502b89cf5 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -699,12 +699,12 @@ pipe_rdwr_fasync(int fd, struct file *filp, int on) int retval; mutex_lock(&inode->i_mutex); - retval = fasync_helper(fd, filp, on, &pipe->fasync_readers); - - if (retval >= 0) + if (retval >= 0) { retval = fasync_helper(fd, filp, on, &pipe->fasync_writers); - + if (retval < 0) /* this can happen only if on == T */ + fasync_helper(-1, filp, 0, &pipe->fasync_readers); + } mutex_unlock(&inode->i_mutex); if (retval < 0) From a3cfbb53b1764a3d1f58ddc032737ab9edaa7d41 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 12 Mar 2009 14:31:29 -0700 Subject: [PATCH 42/71] vfs: add missing unlock in sget() In sget(), destroy_super(s) is called with s->s_umount held, which makes lockdep unhappy. Signed-off-by: Li Zefan Cc: Al Viro Acked-by: Peter Zijlstra Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/super.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/super.c b/fs/super.c index 8349ed6b1412..6ce501447ada 100644 --- a/fs/super.c +++ b/fs/super.c @@ -371,8 +371,10 @@ retry: continue; if (!grab_super(old)) goto retry; - if (s) + if (s) { + up_write(&s->s_umount); destroy_super(s); + } return old; } } @@ -387,6 +389,7 @@ retry: err = set(s, data); if (err) { spin_unlock(&sb_lock); + up_write(&s->s_umount); destroy_super(s); return ERR_PTR(err); } From a4e3f91b98d86ae0b5c816fe45190bb29ac32f71 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 12 Mar 2009 14:31:30 -0700 Subject: [PATCH 43/71] ds2760_battery.c: fix division by zero The 'battery remaining capacity' calculation in drivers/power/ds2760_battery.c lacks a parameter check to a division operation which causes the kernel to oops on my board. [ 21.233750] Division by zero in kernel. [ 21.237646] [] (__div0+0x0/0x20) from [] (Ldiv0+0x8/0x10) [ 21.244816] [] (ds2760_battery_read_status+0x0/0x2a4) from [] (ds2760_battery_get_property+0x30/0xdc) [ 21.255803] r8:c03a22c0 r7:c7886100 r6:00000009 r5:c782fe7c r4:c7886084 [ 21.262518] [] (ds2760_battery_get_property+0x0/0xdc) from [] (power_supply_show_property+0x48/0x114) [ 21.273480] r6:c7996000 r5:00000009 r4:00000000 [ 21.278111] [] (power_supply_show_property+0x0/0x114) from [] (power_supply_uevent+0x188/0x280) [ 21.288537] r8:00000001 r7:c7886100 r6:c7996000 r5:000000b4 r4:00000000 [ 21.295222] [] (power_supply_uevent+0x0/0x280) from [] (dev_uevent+0xd4/0x10c) [ 21.304199] [] (dev_uevent+0x0/0x10c) from [] (kobject_uevent_env+0x180/0x390) [ 21.313170] r5:00000000 r4:c78860ac [ 21.316725] [] (kobject_uevent_env+0x0/0x390) from [] (kobject_uevent+0x14/0x18) [ 21.325850] [] (kobject_uevent+0x0/0x18) from [] (power_supply_changed_work+0x5c/0x70) [ 21.335506] [] (power_supply_changed_work+0x0/0x70) from [] (run_workqueue+0xbc/0x144) [ 21.345167] r4:c7812040 [ 21.347716] [] (run_workqueue+0x0/0x144) from [] (worker_thread+0xa8/0xbc) [ 21.356296] r7:c7812040 r6:c7820b00 r5:c782ffa4 r4:c7812048 [ 21.361957] [] (worker_thread+0x0/0xbc) from [] (kthread+0x5c/0x94) [ 21.369971] r7:00000000 r6:c004d8a4 r5:c7812040 r4:c782e000 [ 21.375612] [] (kthread+0x0/0x94) from [] (do_exit+0x0/0x688) Signed-off-by: Daniel Mack Cc: Szabolcs Gyurko Acked-by: Matt Reimer Acked-by: Anton Vorontsov Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/power/ds2760_battery.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index 1d768928e0bb..a52d4a11652d 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -180,10 +180,13 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di) di->empty_uAh = battery_interpolate(scale, di->temp_C / 10); di->empty_uAh *= 1000; /* convert to µAh */ - /* From Maxim Application Note 131: remaining capacity = - * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */ - di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) / - (di->full_active_uAh - di->empty_uAh); + if (di->full_active_uAh == di->empty_uAh) + di->rem_capacity = 0; + else + /* From Maxim Application Note 131: remaining capacity = + * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */ + di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) / + (di->full_active_uAh - di->empty_uAh); if (di->rem_capacity < 0) di->rem_capacity = 0; From 1b53dc74ef957f134d93e989150f983e92fb88e3 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Thu, 12 Mar 2009 14:31:32 -0700 Subject: [PATCH 44/71] MAINTAINERS: downgrade support for man-pages Unfortunately, Linux Foundation funding for my work on man-pages/testing/doc under the auspices of the LF documentation fellowship unfortunately ran out a short while ago (after earlier attempts to seek funding, only Google stepped forward with a bit of further funding for the position), so the patch below acknowledges something closer to reality. Unfortunately, there will (probably very) soon be a further downgrade from "Maintained" to "Odd Fixes" or "Orphan", unless some funding miracle occurs. So, if anyone is looking to become man-pages maintainer, there may soon be an opening (okay, don't trample me in the rush ;-).) Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1c2ca1dc66f2..61aeb5aae244 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1469,8 +1469,6 @@ L: linux-acpi@vger.kernel.org S: Supported DOCUMENTATION (/Documentation directory) -P: Michael Kerrisk -M: mtk.manpages@gmail.com P: Randy Dunlap M: rdunlap@xenotime.net L: linux-doc@vger.kernel.org @@ -2879,7 +2877,7 @@ P: Michael Kerrisk M: mtk.manpages@gmail.com W: http://www.kernel.org/doc/man-pages L: linux-man@vger.kernel.org -S: Supported +S: Maintained MARVELL LIBERTAS WIRELESS DRIVER P: Dan Williams From 7c48ed3383bfb2106694807361ec187fe8a4333d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 12 Mar 2009 14:31:33 -0700 Subject: [PATCH 45/71] mmc: s3cmci: fix s3c2410_dma_config() arguments. The s3cmci driver is calling s3c2410_dma_config with incorrect data for the DCON register. The S3C2410_DCON_HWTRIG is implicit in the channel configuration and the device selection of S3C2410_DCON_CH0_SDI is incorrect as the DMA system may not select channel 0. Signed-off-by: Ben Dooks Acked-by: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/s3cmci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index f4a67c65d301..2db166b7096f 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -793,8 +793,7 @@ static void s3cmci_dma_setup(struct s3cmci_host *host, host->mem->start + host->sdidata); if (!setup_ok) { - s3c2410_dma_config(host->dma, 4, - (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); + s3c2410_dma_config(host->dma, 4, 0); s3c2410_dma_set_buffdone_fn(host->dma, s3cmci_dma_done_callback); s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); From 1ba869ec581fd9078b684c56c399ffe3d2345e27 Mon Sep 17 00:00:00 2001 From: Michael Spang Date: Thu, 12 Mar 2009 14:31:34 -0700 Subject: [PATCH 46/71] acer-wmi: fix regression in backlight detection Currently we disable the Acer WMI backlight device if there is no ACPI backlight device. As a result, we end up with no backlight device at all. We should instead disable it if there is an ACPI device, as the other laptop drivers do. This regression was introduced in febf2d9 ("Acer-WMI: fingers off backlight if video.ko is serving this functionality"). Each laptop driver with backlight support got a similar change around febf2d9. The changes to the other drivers look correct; see e.g. a598c82f for a similar but correct change. The regression is also in 2.6.28. Signed-off-by: Michael Spang Acked-by: Thomas Renninger Cc: Zhang Rui Cc: Andi Kleen Cc: Carlos Corbacho Cc: Len Brown Cc: "Rafael J. Wysocki" Cc: [2.6.28.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acer-wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 94c9f911824e..6bcca616a704 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -1297,7 +1297,7 @@ static int __init acer_wmi_init(void) set_quirks(); - if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { + if (acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { interface->capability &= ~ACER_CAP_BRIGHTNESS; printk(ACER_INFO "Brightness must be controlled by " "generic video driver\n"); From 02d46e07e538c285accb5c000a7db3a97eff1fbf Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 12 Mar 2009 14:31:36 -0700 Subject: [PATCH 47/71] mfd: add support for WM8351 revision B No software visible difference from revision A. Signed-off-by: Mark Brown Cc: Samuel Ortiz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mfd/wm8350-core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 84d5ea1ec171..b457a05b28d9 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1383,6 +1383,11 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, wm8350->power.rev_g_coeff = 1; break; + case 1: + dev_info(wm8350->dev, "WM8351 Rev B\n"); + wm8350->power.rev_g_coeff = 1; + break; + default: dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n"); ret = -ENODEV; From f272b7bc447553410dde691aa31fc531adf9c175 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 12 Mar 2009 14:31:36 -0700 Subject: [PATCH 48/71] memcg: use correct scan number at reclaim Even when page reclaim is under mem_cgroup, # of scan page is determined by status of global LRU. Fix that. Signed-off-by: KOSAKI Motohiro Signed-off-by: KAMEZAWA Hiroyuki Cc: Daisuke Nishimura Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 6177e3bcd66b..e89517141657 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1469,7 +1469,7 @@ static void shrink_zone(int priority, struct zone *zone, int file = is_file_lru(l); int scan; - scan = zone_page_state(zone, NR_LRU_BASE + l); + scan = zone_nr_pages(zone, sc, l); if (priority) { scan >>= priority; scan = (scan * percent[file]) / 100; From 7ef0d7377cb287e08f3ae94cebc919448e1f5dff Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 12 Mar 2009 14:31:38 -0700 Subject: [PATCH 49/71] fs: new inode i_state corruption fix There was a report of a data corruption http://lkml.org/lkml/2008/11/14/121. There is a script included to reproduce the problem. During testing, I encountered a number of strange things with ext3, so I tried ext2 to attempt to reduce complexity of the problem. I found that fsstress would quickly hang in wait_on_inode, waiting for I_LOCK to be cleared, even though instrumentation showed that unlock_new_inode had already been called for that inode. This points to memory scribble, or synchronisation problme. i_state of I_NEW inodes is not protected by inode_lock because other processes are not supposed to touch them until I_LOCK (and I_NEW) is cleared. Adding WARN_ON(inode->i_state & I_NEW) to sites where we modify i_state revealed that generic_sync_sb_inodes is picking up new inodes from the inode lists and passing them to __writeback_single_inode without waiting for I_NEW. Subsequently modifying i_state causes corruption. In my case it would look like this: CPU0 CPU1 unlock_new_inode() __sync_single_inode() reg <- inode->i_state reg -> reg & ~(I_LOCK|I_NEW) reg <- inode->i_state reg -> inode->i_state reg -> reg | I_SYNC reg -> inode->i_state Non-atomic RMW on CPU1 overwrites CPU0 store and sets I_LOCK|I_NEW again. Fix for this is rather than wait for I_NEW inodes, just skip over them: inodes concurrently being created are not subject to data integrity operations, and should not significantly contribute to dirty memory either. After this change, I'm unable to reproduce any of the added warnings or hangs after ~1hour of running. Previously, the new warnings would start immediately and hang would happen in under 5 minutes. I'm also testing on ext3 now, and so far no problems there either. I don't know whether this fixes the problem reported above, but it fixes a real problem for me. Cc: "Jorge Boncompte [DTI2]" Reported-by: Adrian Hunter Cc: Jan Kara Cc: Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fs-writeback.c | 9 ++++++++- fs/inode.c | 7 +++++++ 2 files changed, 15 insertions(+), 1 deletion(-) diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index e5eaa62fd17f..e3fe9918faaf 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -274,6 +274,7 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc) int ret; BUG_ON(inode->i_state & I_SYNC); + WARN_ON(inode->i_state & I_NEW); /* Set I_SYNC, reset I_DIRTY */ dirty = inode->i_state & I_DIRTY; @@ -298,6 +299,7 @@ __sync_single_inode(struct inode *inode, struct writeback_control *wbc) } spin_lock(&inode_lock); + WARN_ON(inode->i_state & I_NEW); inode->i_state &= ~I_SYNC; if (!(inode->i_state & I_FREEING)) { if (!(inode->i_state & I_DIRTY) && @@ -470,6 +472,11 @@ void generic_sync_sb_inodes(struct super_block *sb, break; } + if (inode->i_state & I_NEW) { + requeue_io(inode); + continue; + } + if (wbc->nonblocking && bdi_write_congested(bdi)) { wbc->encountered_congestion = 1; if (!sb_is_blkdev_sb(sb)) @@ -531,7 +538,7 @@ void generic_sync_sb_inodes(struct super_block *sb, list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { struct address_space *mapping; - if (inode->i_state & (I_FREEING|I_WILL_FREE)) + if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) continue; mapping = inode->i_mapping; if (mapping->nrpages == 0) diff --git a/fs/inode.c b/fs/inode.c index 913ab2d9a5d1..826fb0b9d1c3 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -359,6 +359,7 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose) invalidate_inode_buffers(inode); if (!atomic_read(&inode->i_count)) { list_move(&inode->i_list, dispose); + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_FREEING; count++; continue; @@ -460,6 +461,7 @@ static void prune_icache(int nr_to_scan) continue; } list_move(&inode->i_list, &freeable); + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_FREEING; nr_pruned++; } @@ -656,6 +658,7 @@ void unlock_new_inode(struct inode *inode) * just created it (so there can be no old holders * that haven't tested I_LOCK). */ + WARN_ON((inode->i_state & (I_LOCK|I_NEW)) != (I_LOCK|I_NEW)); inode->i_state &= ~(I_LOCK|I_NEW); wake_up_inode(inode); } @@ -1145,6 +1148,7 @@ void generic_delete_inode(struct inode *inode) list_del_init(&inode->i_list); list_del_init(&inode->i_sb_list); + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_FREEING; inodes_stat.nr_inodes--; spin_unlock(&inode_lock); @@ -1186,16 +1190,19 @@ static void generic_forget_inode(struct inode *inode) spin_unlock(&inode_lock); return; } + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_WILL_FREE; spin_unlock(&inode_lock); write_inode_now(inode, 1); spin_lock(&inode_lock); + WARN_ON(inode->i_state & I_NEW); inode->i_state &= ~I_WILL_FREE; inodes_stat.nr_unused--; hlist_del_init(&inode->i_hash); } list_del_init(&inode->i_list); list_del_init(&inode->i_sb_list); + WARN_ON(inode->i_state & I_NEW); inode->i_state |= I_FREEING; inodes_stat.nr_inodes--; spin_unlock(&inode_lock); From c12e56ef6951f4fce1afe9ef6aab9243ea9a9b04 Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Thu, 12 Mar 2009 14:34:59 -0700 Subject: [PATCH 50/71] RDMA/nes: Don't allow userspace QPs to use STag zero STag zero is a special STag that allows consumers to access any bus address without registering memory. The nes driver unfortunately allows STag zero to be used even with QPs created by unprivileged userspace consumers, which means that any process with direct verbs access to the nes device can read and write any memory accessible to the underlying PCI device (usually any memory in the system). Such access is usually given for cluster software such as MPI to use, so this is a local privilege escalation bug on most systems running this driver. The driver was using STag zero to receive the last streaming mode data; to allow STag zero to be disabled for unprivileged QPs, the driver now registers a special MR for this data. Cc: Signed-off-by: Faisal Latif Signed-off-by: Roland Dreier Signed-off-by: Linus Torvalds --- drivers/infiniband/hw/nes/nes_cm.c | 39 +++++++++++++++++++++++---- drivers/infiniband/hw/nes/nes_verbs.c | 2 ++ drivers/infiniband/hw/nes/nes_verbs.h | 1 + 3 files changed, 37 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index a01b4488208b..4a65b96db2c8 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -2490,12 +2490,14 @@ static int nes_disconnect(struct nes_qp *nesqp, int abrupt) int ret = 0; struct nes_vnic *nesvnic; struct nes_device *nesdev; + struct nes_ib_device *nesibdev; nesvnic = to_nesvnic(nesqp->ibqp.device); if (!nesvnic) return -EINVAL; nesdev = nesvnic->nesdev; + nesibdev = nesvnic->nesibdev; nes_debug(NES_DBG_CM, "netdev refcnt = %u.\n", atomic_read(&nesvnic->netdev->refcnt)); @@ -2507,6 +2509,8 @@ static int nes_disconnect(struct nes_qp *nesqp, int abrupt) } else { /* Need to free the Last Streaming Mode Message */ if (nesqp->ietf_frame) { + if (nesqp->lsmm_mr) + nesibdev->ibdev.dereg_mr(nesqp->lsmm_mr); pci_free_consistent(nesdev->pcidev, nesqp->private_data_len+sizeof(struct ietf_mpa_frame), nesqp->ietf_frame, nesqp->ietf_frame_pbase); @@ -2543,6 +2547,12 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) u32 crc_value; int ret; int passive_state; + struct nes_ib_device *nesibdev; + struct ib_mr *ibmr = NULL; + struct ib_phys_buf ibphysbuf; + struct nes_pd *nespd; + + ibqp = nes_get_qp(cm_id->device, conn_param->qpn); if (!ibqp) @@ -2601,6 +2611,26 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) if (cm_id->remote_addr.sin_addr.s_addr != cm_id->local_addr.sin_addr.s_addr) { u64temp = (unsigned long)nesqp; + nesibdev = nesvnic->nesibdev; + nespd = nesqp->nespd; + ibphysbuf.addr = nesqp->ietf_frame_pbase; + ibphysbuf.size = conn_param->private_data_len + + sizeof(struct ietf_mpa_frame); + ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd, + &ibphysbuf, 1, + IB_ACCESS_LOCAL_WRITE, + (u64 *)&nesqp->ietf_frame); + if (!ibmr) { + nes_debug(NES_DBG_CM, "Unable to register memory region" + "for lSMM for cm_node = %p \n", + cm_node); + return -ENOMEM; + } + + ibmr->pd = &nespd->ibpd; + ibmr->device = nespd->ibpd.device; + nesqp->lsmm_mr = ibmr; + u64temp |= NES_SW_CONTEXT_ALIGN>>1; set_wqe_64bit_value(wqe->wqe_words, NES_IWARP_SQ_WQE_COMP_CTX_LOW_IDX, @@ -2611,14 +2641,13 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) wqe->wqe_words[NES_IWARP_SQ_WQE_TOTAL_PAYLOAD_IDX] = cpu_to_le32(conn_param->private_data_len + sizeof(struct ietf_mpa_frame)); - wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_LOW_IDX] = - cpu_to_le32((u32)nesqp->ietf_frame_pbase); - wqe->wqe_words[NES_IWARP_SQ_WQE_FRAG0_HIGH_IDX] = - cpu_to_le32((u32)((u64)nesqp->ietf_frame_pbase >> 32)); + set_wqe_64bit_value(wqe->wqe_words, + NES_IWARP_SQ_WQE_FRAG0_LOW_IDX, + (u64)nesqp->ietf_frame); wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] = cpu_to_le32(conn_param->private_data_len + sizeof(struct ietf_mpa_frame)); - wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = 0; + wqe->wqe_words[NES_IWARP_SQ_WQE_STAG0_IDX] = ibmr->lkey; nesqp->nesqp_context->ird_ord_sizes |= cpu_to_le32(NES_QPCONTEXT_ORDIRD_LSMM_PRESENT | diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 4fdb72454f94..d93a6562817c 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1360,8 +1360,10 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd, NES_QPCONTEXT_MISC_RQ_SIZE_SHIFT); nesqp->nesqp_context->misc |= cpu_to_le32((u32)nesqp->hwqp.sq_encoded_size << NES_QPCONTEXT_MISC_SQ_SIZE_SHIFT); + if (!udata) { nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_PRIV_EN); nesqp->nesqp_context->misc |= cpu_to_le32(NES_QPCONTEXT_MISC_FAST_REGISTER_EN); + } nesqp->nesqp_context->cqs = cpu_to_le32(nesqp->nesscq->hw_cq.cq_number + ((u32)nesqp->nesrcq->hw_cq.cq_number << 16)); u64temp = (u64)nesqp->hwqp.sq_pbase; diff --git a/drivers/infiniband/hw/nes/nes_verbs.h b/drivers/infiniband/hw/nes/nes_verbs.h index 6c6b4da5184f..ae0ca9bc83bd 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.h +++ b/drivers/infiniband/hw/nes/nes_verbs.h @@ -134,6 +134,7 @@ struct nes_qp { struct ietf_mpa_frame *ietf_frame; dma_addr_t ietf_frame_pbase; wait_queue_head_t state_waitq; + struct ib_mr *lsmm_mr; unsigned long socket; struct nes_hw_qp hwqp; struct work_struct work; From ab03eca8d4754ef2ba9821d581975b10b8f317e7 Mon Sep 17 00:00:00 2001 From: Jody McIntyre Date: Thu, 12 Mar 2009 17:39:23 -0400 Subject: [PATCH 51/71] trivial: fix bad links in the ext2 and ext3 documentation Trivial patch to fix bad links in the ext2 and ext3 documentation. Signed-off-by: Jody McIntyre Signed-off-by: Linus Torvalds --- Documentation/filesystems/ext2.txt | 10 +++++----- Documentation/filesystems/ext3.txt | 4 ++-- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt index 4333e836c495..23448551cabe 100644 --- a/Documentation/filesystems/ext2.txt +++ b/Documentation/filesystems/ext2.txt @@ -373,10 +373,10 @@ Filesystem Resizing http://ext2resize.sourceforge.net/ Compression (*) http://e2compr.sourceforge.net/ Implementations for: -Windows 95/98/NT/2000 http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm -Windows 95 (*) http://www.yipton.demon.co.uk/content.html#FSDEXT2 +Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs +Windows 95 (*) http://www.yipton.net/content.html#FSDEXT2 DOS client (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ -OS/2 http://perso.wanadoo.fr/matthieu.willm/ext2-os2/ -RISC OS client ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/ +OS/2 (*) ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ +RISC OS client http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/ -(*) no longer actively developed/supported (as of Apr 2001) +(*) no longer actively developed/supported (as of Mar 2009) diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt index 9dd2a3bb2acc..e5f3833a6ef8 100644 --- a/Documentation/filesystems/ext3.txt +++ b/Documentation/filesystems/ext3.txt @@ -198,5 +198,5 @@ kernel source: programs: http://e2fsprogs.sourceforge.net/ http://ext2resize.sourceforge.net -useful links: http://www-106.ibm.com/developerworks/linux/library/l-fs7/ - http://www-106.ibm.com/developerworks/linux/library/l-fs8/ +useful links: http://www.ibm.com/developerworks/library/l-fs7.html + http://www.ibm.com/developerworks/library/l-fs8.html From 7a81d9a7da03d2f27840d659f97ef140d032f609 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 12:45:15 +0000 Subject: [PATCH 52/71] x86: smarten /proc/interrupts output Impact: change /proc/interrupts output ABI With the number of interrupts on large systems growing, assumptions on the width an interrupt number requires when converted to a decimal string turn invalid. Therefore, calculate the maximum number of digits dynamically. Signed-off-by: Jan Beulich LKML-Reference: <49B911EB.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index b864341dcc45..b8ac3b6cf776 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -45,16 +45,16 @@ void ack_bad_irq(unsigned int irq) /* * /proc/interrupts printing: */ -static int show_other_interrupts(struct seq_file *p) +static int show_other_interrupts(struct seq_file *p, int prec) { int j; - seq_printf(p, "NMI: "); + seq_printf(p, "%*s: ", prec, "NMI"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->__nmi_count); seq_printf(p, " Non-maskable interrupts\n"); #ifdef CONFIG_X86_LOCAL_APIC - seq_printf(p, "LOC: "); + seq_printf(p, "%*s: ", prec, "LOC"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->apic_timer_irqs); seq_printf(p, " Local timer interrupts\n"); @@ -66,40 +66,40 @@ static int show_other_interrupts(struct seq_file *p) seq_printf(p, " Platform interrupts\n"); } #ifdef CONFIG_SMP - seq_printf(p, "RES: "); + seq_printf(p, "%*s: ", prec, "RES"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_resched_count); seq_printf(p, " Rescheduling interrupts\n"); - seq_printf(p, "CAL: "); + seq_printf(p, "%*s: ", prec, "CAL"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_call_count); seq_printf(p, " Function call interrupts\n"); - seq_printf(p, "TLB: "); + seq_printf(p, "%*s: ", prec, "TLB"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif #ifdef CONFIG_X86_MCE - seq_printf(p, "TRM: "); + seq_printf(p, "%*s: ", prec, "TRM"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_thermal_count); seq_printf(p, " Thermal event interrupts\n"); # ifdef CONFIG_X86_64 - seq_printf(p, "THR: "); + seq_printf(p, "%*s: ", prec, "THR"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count); seq_printf(p, " Threshold APIC interrupts\n"); # endif #endif #ifdef CONFIG_X86_LOCAL_APIC - seq_printf(p, "SPU: "); + seq_printf(p, "%*s: ", prec, "SPU"); for_each_online_cpu(j) seq_printf(p, "%10u ", irq_stats(j)->irq_spurious_count); seq_printf(p, " Spurious interrupts\n"); #endif - seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); + seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count)); #if defined(CONFIG_X86_IO_APIC) - seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); + seq_printf(p, "%*s: %10u\n", prec, "MIS", atomic_read(&irq_mis_count)); #endif return 0; } @@ -107,19 +107,22 @@ static int show_other_interrupts(struct seq_file *p) int show_interrupts(struct seq_file *p, void *v) { unsigned long flags, any_count = 0; - int i = *(loff_t *) v, j; + int i = *(loff_t *) v, j, prec; struct irqaction *action; struct irq_desc *desc; if (i > nr_irqs) return 0; + for (prec = 3, j = 1000; prec < 10 && j <= nr_irqs; ++prec) + j *= 10; + if (i == nr_irqs) - return show_other_interrupts(p); + return show_other_interrupts(p, prec); /* print header */ if (i == 0) { - seq_printf(p, " "); + seq_printf(p, "%*s", prec + 8, ""); for_each_online_cpu(j) seq_printf(p, "CPU%-8d", j); seq_putc(p, '\n'); @@ -140,7 +143,7 @@ int show_interrupts(struct seq_file *p, void *v) if (!action && !any_count) goto out; - seq_printf(p, "%3d: ", i); + seq_printf(p, "%*d: ", prec, i); #ifndef CONFIG_SMP seq_printf(p, "%10u ", kstat_irqs(i)); #else From dd63fdcc63f0f853b116b52e56200a0e0227cf5f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 13 Mar 2009 03:20:49 +0100 Subject: [PATCH 53/71] x86: unify kmap_atomic_pfn() and iomap_atomic_prot_pfn(), fix Impact: build fix Move kmap_atomic_prot_pfn() to iomap_32.c. It is used on all 32-bit kernels, while highmem_32.c is only built on highmem kernels. ( Note: the debug_kmap_atomic_prot() check is removed for now, that problem is handled via another patch. ) Reported-by: Thomas Gleixner Cc: Akinobu Mita LKML-Reference: <20090311143317.GA22244@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/mm/highmem_32.c | 20 ++------------------ arch/x86/mm/iomap_32.c | 18 +++++++++++++++++- 2 files changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c index f256e73542d7..522db5e3d0bf 100644 --- a/arch/x86/mm/highmem_32.c +++ b/arch/x86/mm/highmem_32.c @@ -121,24 +121,8 @@ void kunmap_atomic(void *kvaddr, enum km_type type) pagefault_enable(); } -void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot) -{ - enum fixed_addresses idx; - unsigned long vaddr; - - pagefault_disable(); - - debug_kmap_atomic_prot(type); - - idx = type + KM_TYPE_NR * smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - set_pte(kmap_pte - idx, pfn_pte(pfn, prot)); - arch_flush_lazy_mmu_mode(); - - return (void*) vaddr; -} - -/* This is the same as kmap_atomic() but can map memory that doesn't +/* + * This is the same as kmap_atomic() but can map memory that doesn't * have a struct page associated with it. */ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c index 592984e5496b..6e60ba698cee 100644 --- a/arch/x86/mm/iomap_32.c +++ b/arch/x86/mm/iomap_32.c @@ -32,7 +32,23 @@ int is_io_mapping_possible(resource_size_t base, unsigned long size) } EXPORT_SYMBOL_GPL(is_io_mapping_possible); -/* Map 'pfn' using fixed map 'type' and protections 'prot' +void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot) +{ + enum fixed_addresses idx; + unsigned long vaddr; + + pagefault_disable(); + + idx = type + KM_TYPE_NR * smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); + set_pte(kmap_pte - idx, pfn_pte(pfn, prot)); + arch_flush_lazy_mmu_mode(); + + return (void *)vaddr; +} + +/* + * Map 'pfn' using fixed map 'type' and protections 'prot' */ void * iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot) From 46d50c98d90cd7feaa5977a09c574063e5c99b3d Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 12:33:06 +0000 Subject: [PATCH 54/71] x86, 32-bit: also limit NODES_HIGH_SHIFT here Impact: configuration bug fix Just like for x86-64, the range of widths valid for NODE_SHIFT is not unbounded. The upper bound 64-bit uses is definitely also an upper bound for 32-bit. Signed-off-by: Jan Beulich LKML-Reference: <49B90F12.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 87717f3687d2..076f4f85f6ea 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1123,7 +1123,7 @@ config NUMA_EMU config NODES_SHIFT int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP - range 1 9 if X86_64 + range 1 9 default "9" if MAXSMP default "6" if X86_64 default "4" if X86_NUMAQ From 13c6c53282d99c82e79b02477efd2c1e30a991ef Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 12:37:34 +0000 Subject: [PATCH 55/71] x86, 32-bit: also use cpuinfo_x86's x86_{phys,virt}_bits members Impact: 32/64-bit consolidation In a first step, this allows fixing phys_addr_valid() for PAE (which until now reported all addresses to be valid). Subsequently, this will also allow simplifying some MTRR handling code. Signed-off-by: Jan Beulich LKML-Reference: <49B9101E.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/processor.h | 2 +- arch/x86/kernel/cpu/common.c | 12 +++++++++++- arch/x86/kernel/cpu/intel.c | 5 +++++ arch/x86/mm/ioremap.c | 17 ++++++++--------- 4 files changed, 25 insertions(+), 11 deletions(-) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 76139506c3e4..bd3406db1d68 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -75,9 +75,9 @@ struct cpuinfo_x86 { #else /* Number of 4K pages in DTLB/ITLB combined(in pages): */ int x86_tlbsize; +#endif __u8 x86_virt_bits; __u8 x86_phys_bits; -#endif /* CPUID returned core id bits: */ __u8 x86_coreid_bits; /* Max extended CPUID function supported: */ diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 826d5c876278..a95e9480bb9c 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -549,13 +549,15 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_X86_64 if (c->extended_cpuid_level >= 0x80000008) { u32 eax = cpuid_eax(0x80000008); c->x86_virt_bits = (eax >> 8) & 0xff; c->x86_phys_bits = eax & 0xff; } +#ifdef CONFIG_X86_32 + else if (cpu_has(c, X86_FEATURE_PAE) || cpu_has(c, X86_FEATURE_PSE36)) + c->x86_phys_bits = 36; #endif if (c->extended_cpuid_level >= 0x80000007) @@ -602,8 +604,12 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c) { #ifdef CONFIG_X86_64 c->x86_clflush_size = 64; + c->x86_phys_bits = 36; + c->x86_virt_bits = 48; #else c->x86_clflush_size = 32; + c->x86_phys_bits = 32; + c->x86_virt_bits = 32; #endif c->x86_cache_alignment = c->x86_clflush_size; @@ -726,9 +732,13 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) c->x86_coreid_bits = 0; #ifdef CONFIG_X86_64 c->x86_clflush_size = 64; + c->x86_phys_bits = 36; + c->x86_virt_bits = 48; #else c->cpuid_level = -1; /* CPUID not detected */ c->x86_clflush_size = 32; + c->x86_phys_bits = 32; + c->x86_virt_bits = 32; #endif c->x86_cache_alignment = c->x86_clflush_size; memset(&c->x86_capability, 0, sizeof c->x86_capability); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 191117f1ad51..ae769471042e 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -54,6 +54,11 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) c->x86_cache_alignment = 128; #endif + /* CPUID workaround for 0F33/0F34 CPU */ + if (c->x86 == 0xF && c->x86_model == 0x3 + && (c->x86_mask == 0x3 || c->x86_mask == 0x4)) + c->x86_phys_bits = 36; + /* * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate * with P/T states and does not stop in deep C-states diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index aca924a30ee6..83ed74affba9 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -22,13 +22,17 @@ #include #include -#ifdef CONFIG_X86_64 - -static inline int phys_addr_valid(unsigned long addr) +static inline int phys_addr_valid(resource_size_t addr) { - return addr < (1UL << boot_cpu_data.x86_phys_bits); +#ifdef CONFIG_PHYS_ADDR_T_64BIT + return !(addr >> boot_cpu_data.x86_phys_bits); +#else + return 1; +#endif } +#ifdef CONFIG_X86_64 + unsigned long __phys_addr(unsigned long x) { if (x >= __START_KERNEL_map) { @@ -65,11 +69,6 @@ EXPORT_SYMBOL(__virt_addr_valid); #else -static inline int phys_addr_valid(unsigned long addr) -{ - return 1; -} - #ifdef CONFIG_DEBUG_VIRTUAL unsigned long __phys_addr(unsigned long x) { From dc9dd5cc854cde110d2421f3a11fec7597e059c1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 12:40:06 +0000 Subject: [PATCH 56/71] x86: move save_mr() into .meminit.text Impact: cleanup, save memory The function is only being called from boot or memory hotplug paths. Signed-off-by: Jan Beulich LKML-Reference: <49B910B6.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/mm/init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 15219e0d1243..fd3da1dda1c9 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -94,9 +94,9 @@ struct map_range { #define NR_RANGE_MR 5 #endif -static int save_mr(struct map_range *mr, int nr_range, - unsigned long start_pfn, unsigned long end_pfn, - unsigned long page_size_mask) +static int __meminit save_mr(struct map_range *mr, int nr_range, + unsigned long start_pfn, unsigned long end_pfn, + unsigned long page_size_mask) { if (start_pfn < end_pfn) { if (nr_range >= NR_RANGE_MR) From 9a50156a1c7bfa65315facaffdfbed6513fcfd3b Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 12:41:23 +0000 Subject: [PATCH 57/71] x86: properly __init-annotate recent early_printk additions Impact: cleanup, save memory Don't keep code resident that's only needed during startup. Signed-off-by: Jan Beulich LKML-Reference: <49B91103.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/early_printk.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 639ad98238a2..335f049d110f 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -250,7 +250,7 @@ static int dbgp_wait_until_complete(void) return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); } -static void dbgp_mdelay(int ms) +static void __init dbgp_mdelay(int ms) { int i; @@ -311,7 +311,7 @@ static void dbgp_set_data(const void *buf, int size) writel(hi, &ehci_debug->data47); } -static void dbgp_get_data(void *buf, int size) +static void __init dbgp_get_data(void *buf, int size) { unsigned char *bytes = buf; u32 lo, hi; @@ -355,7 +355,7 @@ static int dbgp_bulk_write(unsigned devnum, unsigned endpoint, return ret; } -static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, +static int __init dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, int size) { u32 pids, addr, ctrl; @@ -386,8 +386,8 @@ static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data, return ret; } -static int dbgp_control_msg(unsigned devnum, int requesttype, int request, - int value, int index, void *data, int size) +static int __init dbgp_control_msg(unsigned devnum, int requesttype, + int request, int value, int index, void *data, int size) { u32 pids, addr, ctrl; struct usb_ctrlrequest req; @@ -489,7 +489,7 @@ static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc) return 0; } -static int ehci_reset_port(int port) +static int __init ehci_reset_port(int port) { u32 portsc; u32 delay_time, delay; @@ -532,7 +532,7 @@ static int ehci_reset_port(int port) return -EBUSY; } -static int ehci_wait_for_port(int port) +static int __init ehci_wait_for_port(int port) { u32 status; int ret, reps; @@ -557,13 +557,13 @@ static inline void dbgp_printk(const char *fmt, ...) { } typedef void (*set_debug_port_t)(int port); -static void default_set_debug_port(int port) +static void __init default_set_debug_port(int port) { } -static set_debug_port_t set_debug_port = default_set_debug_port; +static set_debug_port_t __initdata set_debug_port = default_set_debug_port; -static void nvidia_set_debug_port(int port) +static void __init nvidia_set_debug_port(int port) { u32 dword; dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, From 82034d6f59b4772f4233bbb61c670290803a9960 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 12:57:10 +0000 Subject: [PATCH 58/71] x86: clean up output resulting from update_mptable option Impact: cleanup Without apic=verbose, using the update_mptable option would result in garbled and confusing output due to the inconsistent use of printk() vs apic_printk(). Signed-off-by: Jan Beulich LKML-Reference: <49B914B6.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index e8192401da47..47673e02ae58 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -890,12 +890,12 @@ static int __init replace_intsrc_all(struct mpc_table *mpc, #ifdef CONFIG_X86_IO_APIC struct mpc_intsrc *m = (struct mpc_intsrc *)mpt; - printk(KERN_INFO "OLD "); + apic_printk(APIC_VERBOSE, "OLD "); print_MP_intsrc_info(m); i = get_MP_intsrc_index(m); if (i > 0) { assign_to_mpc_intsrc(&mp_irqs[i], m); - printk(KERN_INFO "NEW "); + apic_printk(APIC_VERBOSE, "NEW "); print_mp_irq_info(&mp_irqs[i]); } else if (!i) { /* legacy, do nothing */ @@ -943,7 +943,7 @@ static int __init replace_intsrc_all(struct mpc_table *mpc, continue; if (nr_m_spare > 0) { - printk(KERN_INFO "*NEW* found "); + apic_printk(APIC_VERBOSE, "*NEW* found\n"); nr_m_spare--; assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]); m_spare[nr_m_spare] = NULL; From 5c0e6f035df983210e4d22213aed624ced502d3d Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 13:07:23 +0000 Subject: [PATCH 59/71] x86: fix code paths used by update_mptable Impact: fix crashes under Xen due to unrobust e820 code find_e820_area_size() must return a properly distinguishable and out-of-bounds value when it fails, and -1UL does not meet that criteria on i386/PAE. Additionally, callers of the function must check against that value. early_reserve_e820() should be prepared for the region found to be outside of the addressable range on 32-bits. e820_update_range_map() should not blindly update e820, but should do all it work on the map it got a pointer passed for (which in 50% of the cases is &e820_saved). It must also not call e820_add_region(), as that again acts on e820 unconditionally. The issues were found when trying to make this option work in our Xen kernel (i.e. where some of the silent assumptions made in the code would not hold). Signed-off-by: Jan Beulich LKML-Reference: <49B9171B.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/check.c | 2 +- arch/x86/kernel/e820.c | 32 +++++++++++++++++++++++++------- 2 files changed, 26 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c index 2ac0ab71412a..b617b1164f1e 100644 --- a/arch/x86/kernel/check.c +++ b/arch/x86/kernel/check.c @@ -83,7 +83,7 @@ void __init setup_bios_corruption_check(void) u64 size; addr = find_e820_area_size(addr, &size, PAGE_SIZE); - if (addr == 0) + if (!(addr + 1)) break; if ((addr + size) > corruption_check_size) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 508bec1cee27..3cf6681ac80d 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -421,7 +421,7 @@ static u64 __init e820_update_range_map(struct e820map *e820x, u64 start, u64 size, unsigned old_type, unsigned new_type) { - int i; + unsigned int i, x; u64 real_updated_size = 0; BUG_ON(old_type == new_type); @@ -429,7 +429,7 @@ static u64 __init e820_update_range_map(struct e820map *e820x, u64 start, if (size > (ULLONG_MAX - start)) size = ULLONG_MAX - start; - for (i = 0; i < e820.nr_map; i++) { + for (i = 0; i < e820x->nr_map; i++) { struct e820entry *ei = &e820x->map[i]; u64 final_start, final_end; if (ei->type != old_type) @@ -446,14 +446,23 @@ static u64 __init e820_update_range_map(struct e820map *e820x, u64 start, final_end = min(start + size, ei->addr + ei->size); if (final_start >= final_end) continue; - e820_add_region(final_start, final_end - final_start, - new_type); + + x = e820x->nr_map; + if (x == ARRAY_SIZE(e820x->map)) { + printk(KERN_ERR "Too many memory map entries!\n"); + break; + } + e820x->map[x].addr = final_start; + e820x->map[x].size = final_end - final_start; + e820x->map[x].type = new_type; + e820x->nr_map++; + real_updated_size += final_end - final_start; - ei->size -= final_end - final_start; if (ei->addr < final_start) continue; ei->addr = final_end; + ei->size -= final_end - final_start; } return real_updated_size; } @@ -1020,8 +1029,8 @@ u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align) continue; return addr; } - return -1UL; + return -1ULL; } /* @@ -1034,13 +1043,22 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) u64 start; start = startt; - while (size < sizet) + while (size < sizet && (start + 1)) start = find_e820_area_size(start, &size, align); if (size < sizet) return 0; +#ifdef CONFIG_X86_32 + if (start >= MAXMEM) + return 0; + if (start + size > MAXMEM) + size = MAXMEM - start; +#endif + addr = round_down(start + size - sizet, align); + if (addr < start) + return 0; e820_update_range(addr, sizet, E820_RAM, E820_RESERVED); e820_update_range_saved(addr, sizet, E820_RAM, E820_RESERVED); printk(KERN_INFO "update e820 for early_reserve_e820\n"); From 698609bdcd35d0641f4c6622c83680ab1a6d67cb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 12 Mar 2009 13:11:50 +0000 Subject: [PATCH 60/71] x86: create a non-zero sized bm_pte only when needed Impact: kernel image size reduction Since in most configurations the pmd page needed maps the same range of virtual addresses which is also mapped by the earlier inserted one for covering FIX_DBGP_BASE, that page (and its insertion in the page tables) can be avoided altogether by detecting the condition at compile time. Signed-off-by: Jan Beulich LKML-Reference: <49B91826.76E4.0078.0@novell.com> Signed-off-by: Ingo Molnar --- arch/x86/mm/ioremap.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 83ed74affba9..55e127f71ed9 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -487,7 +487,12 @@ static int __init early_ioremap_debug_setup(char *str) early_param("early_ioremap_debug", early_ioremap_debug_setup); static __initdata int after_paging_init; -static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)] __page_aligned_bss; +#define __FIXADDR_TOP (-PAGE_SIZE) +static pte_t bm_pte[(__fix_to_virt(FIX_DBGP_BASE) + ^ __fix_to_virt(FIX_BTMAP_BEGIN)) >> PMD_SHIFT + ? PAGE_SIZE / sizeof(pte_t) : 0] __page_aligned_bss; +#undef __FIXADDR_TOP +static __initdata pte_t *bm_ptep; static inline pmd_t * __init early_ioremap_pmd(unsigned long addr) { @@ -502,6 +507,8 @@ static inline pmd_t * __init early_ioremap_pmd(unsigned long addr) static inline pte_t * __init early_ioremap_pte(unsigned long addr) { + if (!sizeof(bm_pte)) + return &bm_ptep[pte_index(addr)]; return &bm_pte[pte_index(addr)]; } @@ -519,8 +526,14 @@ void __init early_ioremap_init(void) slot_virt[i] = fix_to_virt(FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*i); pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)); - memset(bm_pte, 0, sizeof(bm_pte)); - pmd_populate_kernel(&init_mm, pmd, bm_pte); + if (sizeof(bm_pte)) { + memset(bm_pte, 0, sizeof(bm_pte)); + pmd_populate_kernel(&init_mm, pmd, bm_pte); + } else { + bm_ptep = pte_offset_kernel(pmd, 0); + if (early_ioremap_debug) + printk(KERN_INFO "bm_ptep=%p\n", bm_ptep); + } /* * The boot-ioremap range spans multiple pmds, for which From 91219bcbdcccc1686b0ecce09e28825c93619c07 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Thu, 12 Mar 2009 02:37:00 +0530 Subject: [PATCH 61/71] x86: cpu_debug add write support for MSRs Supported write flag for registers. currently write is enabled only for PMC MSR. [root@ht]# cat /sys/kernel/debug/x86/cpu/cpu1/pmc/0x300/value 0x0 [root@ht]# echo 1234 > /sys/kernel/debug/x86/cpu/cpu1/pmc/0x300/value [root@ht]# cat /sys/kernel/debug/x86/cpu/cpu1/pmc/0x300/value 0x4d2 [root@ht]# echo 0x1234 > /sys/kernel/debug/x86/cpu/cpu1/pmc/0x300/value [root@ht]# cat /sys/kernel/debug/x86/cpu/cpu1/pmc/0x300/value 0x1234 Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpu_debug.h | 16 +++-- arch/x86/kernel/cpu/cpu_debug.c | 118 ++++++++++++++++++++++--------- 2 files changed, 97 insertions(+), 37 deletions(-) diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h index d24d64fcee04..56f1635e4617 100755 --- a/arch/x86/include/asm/cpu_debug.h +++ b/arch/x86/include/asm/cpu_debug.h @@ -171,6 +171,17 @@ struct cpu_private { struct cpu_debug_base { char *name; /* Register name */ unsigned flag; /* Register flag */ + unsigned write; /* Register write flag */ +}; + +/* + * Currently it looks similar to cpu_debug_base but once we add more files + * cpu_file_base will go in different direction + */ +struct cpu_file_base { + char *name; /* Register file name */ + unsigned flag; /* Register file flag */ + unsigned write; /* Register write flag */ }; struct cpu_cpuX_base { @@ -178,11 +189,6 @@ struct cpu_cpuX_base { int init; /* Register index file */ }; -struct cpu_file_base { - char *name; /* Register file name */ - unsigned flag; /* Register file flag */ -}; - struct cpu_debug_range { unsigned min; /* Register range min */ unsigned max; /* Register range max */ diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c index 9abbcbd933cc..21c0cf8ced18 100755 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ b/arch/x86/kernel/cpu/cpu_debug.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -40,41 +41,41 @@ static DEFINE_MUTEX(cpu_debug_lock); static struct dentry *cpu_debugfs_dir; static struct cpu_debug_base cpu_base[] = { - { "mc", CPU_MC }, /* Machine Check */ - { "monitor", CPU_MONITOR }, /* Monitor */ - { "time", CPU_TIME }, /* Time */ - { "pmc", CPU_PMC }, /* Performance Monitor */ - { "platform", CPU_PLATFORM }, /* Platform */ - { "apic", CPU_APIC }, /* APIC */ - { "poweron", CPU_POWERON }, /* Power-on */ - { "control", CPU_CONTROL }, /* Control */ - { "features", CPU_FEATURES }, /* Features control */ - { "lastbranch", CPU_LBRANCH }, /* Last Branch */ - { "bios", CPU_BIOS }, /* BIOS */ - { "freq", CPU_FREQ }, /* Frequency */ - { "mtrr", CPU_MTRR }, /* MTRR */ - { "perf", CPU_PERF }, /* Performance */ - { "cache", CPU_CACHE }, /* Cache */ - { "sysenter", CPU_SYSENTER }, /* Sysenter */ - { "therm", CPU_THERM }, /* Thermal */ - { "misc", CPU_MISC }, /* Miscellaneous */ - { "debug", CPU_DEBUG }, /* Debug */ - { "pat", CPU_PAT }, /* PAT */ - { "vmx", CPU_VMX }, /* VMX */ - { "call", CPU_CALL }, /* System Call */ - { "base", CPU_BASE }, /* BASE Address */ - { "smm", CPU_SMM }, /* System mgmt mode */ - { "svm", CPU_SVM }, /*Secure Virtial Machine*/ - { "osvm", CPU_OSVM }, /* OS-Visible Workaround*/ - { "tss", CPU_TSS }, /* Task Stack Segment */ - { "cr", CPU_CR }, /* Control Registers */ - { "dt", CPU_DT }, /* Descriptor Table */ - { "registers", CPU_REG_ALL }, /* Select all Registers */ + { "mc", CPU_MC, 0 }, + { "monitor", CPU_MONITOR, 0 }, + { "time", CPU_TIME, 0 }, + { "pmc", CPU_PMC, 1 }, + { "platform", CPU_PLATFORM, 0 }, + { "apic", CPU_APIC, 0 }, + { "poweron", CPU_POWERON, 0 }, + { "control", CPU_CONTROL, 0 }, + { "features", CPU_FEATURES, 0 }, + { "lastbranch", CPU_LBRANCH, 0 }, + { "bios", CPU_BIOS, 0 }, + { "freq", CPU_FREQ, 0 }, + { "mtrr", CPU_MTRR, 0 }, + { "perf", CPU_PERF, 0 }, + { "cache", CPU_CACHE, 0 }, + { "sysenter", CPU_SYSENTER, 0 }, + { "therm", CPU_THERM, 0 }, + { "misc", CPU_MISC, 0 }, + { "debug", CPU_DEBUG, 0 }, + { "pat", CPU_PAT, 0 }, + { "vmx", CPU_VMX, 0 }, + { "call", CPU_CALL, 0 }, + { "base", CPU_BASE, 0 }, + { "smm", CPU_SMM, 0 }, + { "svm", CPU_SVM, 0 }, + { "osvm", CPU_OSVM, 0 }, + { "tss", CPU_TSS, 0 }, + { "cr", CPU_CR, 0 }, + { "dt", CPU_DT, 0 }, + { "registers", CPU_REG_ALL, 0 }, }; static struct cpu_file_base cpu_file[] = { - { "index", CPU_REG_ALL }, /* index */ - { "value", CPU_REG_ALL }, /* value */ + { "index", CPU_REG_ALL, 0 }, + { "value", CPU_REG_ALL, 1 }, }; /* Intel Registers Range */ @@ -608,9 +609,62 @@ static int cpu_seq_open(struct inode *inode, struct file *file) return err; } +static int write_msr(struct cpu_private *priv, u64 val) +{ + u32 low, high; + + high = (val >> 32) & 0xffffffff; + low = val & 0xffffffff; + + if (!wrmsr_safe_on_cpu(priv->cpu, priv->reg, low, high)) + return 0; + + return -EPERM; +} + +static int write_cpu_register(struct cpu_private *priv, const char *buf) +{ + int ret = -EPERM; + u64 val; + + ret = strict_strtoull(buf, 0, &val); + if (ret < 0) + return ret; + + /* Supporting only MSRs */ + if (priv->type < CPU_TSS_BIT) + return write_msr(priv, val); + + return ret; +} + +static ssize_t cpu_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *off) +{ + struct seq_file *seq = file->private_data; + struct cpu_private *priv = seq->private; + char buf[19]; + + if ((priv == NULL) || (count >= sizeof(buf))) + return -EINVAL; + + if (copy_from_user(&buf, ubuf, count)) + return -EFAULT; + + buf[count] = 0; + + if ((cpu_base[priv->type].write) && (cpu_file[priv->file].write)) + if (!write_cpu_register(priv, buf)) + return count; + + return -EACCES; +} + static const struct file_operations cpu_fops = { + .owner = THIS_MODULE, .open = cpu_seq_open, .read = seq_read, + .write = cpu_write, .llseek = seq_lseek, .release = seq_release, }; From aa8e4fc68d8024cd3132035d13c3cefa7baeac8f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Mar 2009 19:32:51 -0700 Subject: [PATCH 62/71] bitmap: fix end condition in bitmap_find_free_region Guennadi Liakhovetski noticed that the end condition for the loop in bitmap_find_free_region() is wrong, and the "return if error" was also using the wrong conditional that would only trigger if the bitmap was an exact multiple of the allocation size, which is not necessarily the case with dma_alloc_from_coherent(). Such a failure would end up in bitmap_find_free_region() accessing beyond the end of the bitmap. Reported-by: Guennadi Liakhovetski Cc: Andrew Morton Signed-off-by: Linus Torvalds --- lib/bitmap.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/lib/bitmap.c b/lib/bitmap.c index 1338469ac849..35a1f7ff4149 100644 --- a/lib/bitmap.c +++ b/lib/bitmap.c @@ -948,15 +948,15 @@ done: */ int bitmap_find_free_region(unsigned long *bitmap, int bits, int order) { - int pos; /* scans bitmap by regions of size order */ + int pos, end; /* scans bitmap by regions of size order */ - for (pos = 0; pos < bits; pos += (1 << order)) - if (__reg_op(bitmap, pos, order, REG_OP_ISFREE)) - break; - if (pos == bits) - return -ENOMEM; - __reg_op(bitmap, pos, order, REG_OP_ALLOC); - return pos; + for (pos = 0 ; (end = pos + (1 << order)) <= bits; pos = end) { + if (!__reg_op(bitmap, pos, order, REG_OP_ISFREE)) + continue; + __reg_op(bitmap, pos, order, REG_OP_ALLOC); + return pos; + } + return -ENOMEM; } EXPORT_SYMBOL(bitmap_find_free_region); From 041b62374c7fedc11a8a1eeda2868612d3d1436c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Mar 2009 19:39:28 -0700 Subject: [PATCH 63/71] Linus 2.6.29-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 5a5b82eaaec2..2e2f4a4324af 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 29 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Erotic Pickled Herring # *DOCUMENTATION* From 4bb9c5c02153dfc89a6c73a6f32091413805ad7d Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Thu, 12 Mar 2009 17:45:27 -0700 Subject: [PATCH 64/71] VM, x86, PAT: Change is_linear_pfn_mapping to not use vm_pgoff Impact: fix false positive PAT warnings - also fix VirtalBox hang Use of vma->vm_pgoff to identify the pfnmaps that are fully mapped at mmap time is broken. vm_pgoff is set by generic mmap code even for cases where drivers are setting up the mappings at the fault time. The problem was originally reported here: http://marc.info/?l=linux-kernel&m=123383810628583&w=2 Change is_linear_pfn_mapping logic to overload VM_INSERTPAGE flag along with VM_PFNMAP to mean full PFNMAP setup at mmap time. Problem also tracked at: http://bugzilla.kernel.org/show_bug.cgi?id=12800 Reported-by: Thomas Hellstrom Tested-by: Frans Pop Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha @intel.com> Cc: Nick Piggin Cc: "ebiederm@xmission.com" Cc: # only for 2.6.29.1, not .28 LKML-Reference: <20090313004527.GA7176@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar --- arch/x86/mm/pat.c | 5 +++-- include/linux/mm.h | 15 +++++++++++++-- mm/memory.c | 6 ++++-- 3 files changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index e0ab173b6974..21bc1f787ae2 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -641,10 +641,11 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot, is_ram = pat_pagerange_is_ram(paddr, paddr + size); /* - * reserve_pfn_range() doesn't support RAM pages. + * reserve_pfn_range() doesn't support RAM pages. Maintain the current + * behavior with RAM pages by returning success. */ if (is_ram != 0) - return -EINVAL; + return 0; ret = reserve_memtype(paddr, paddr + size, want_flags, &flags); if (ret) diff --git a/include/linux/mm.h b/include/linux/mm.h index 065cdf8c09fb..3daa05feed9f 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -98,7 +98,7 @@ extern unsigned int kobjsize(const void *objp); #define VM_HUGETLB 0x00400000 /* Huge TLB Page VM */ #define VM_NONLINEAR 0x00800000 /* Is non-linear (remap_file_pages) */ #define VM_MAPPED_COPY 0x01000000 /* T if mapped copy of data (nommu mmap) */ -#define VM_INSERTPAGE 0x02000000 /* The vma has had "vm_insert_page()" done on it */ +#define VM_INSERTPAGE 0x02000000 /* The vma has had "vm_insert_page()" done on it. Refer note in VM_PFNMAP_AT_MMAP below */ #define VM_ALWAYSDUMP 0x04000000 /* Always include in core dumps */ #define VM_CAN_NONLINEAR 0x08000000 /* Has ->fault & does nonlinear pages */ @@ -126,6 +126,17 @@ extern unsigned int kobjsize(const void *objp); */ #define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_RESERVED | VM_PFNMAP) +/* + * pfnmap vmas that are fully mapped at mmap time (not mapped on fault). + * Used by x86 PAT to identify such PFNMAP mappings and optimize their handling. + * Note VM_INSERTPAGE flag is overloaded here. i.e, + * VM_INSERTPAGE && !VM_PFNMAP implies + * The vma has had "vm_insert_page()" done on it + * VM_INSERTPAGE && VM_PFNMAP implies + * The vma is PFNMAP with full mapping at mmap time + */ +#define VM_PFNMAP_AT_MMAP (VM_INSERTPAGE | VM_PFNMAP) + /* * mapping from the currently active vm_flags protection bits (the * low four bits) to a page protection mask.. @@ -145,7 +156,7 @@ extern pgprot_t protection_map[16]; */ static inline int is_linear_pfn_mapping(struct vm_area_struct *vma) { - return ((vma->vm_flags & VM_PFNMAP) && vma->vm_pgoff); + return ((vma->vm_flags & VM_PFNMAP_AT_MMAP) == VM_PFNMAP_AT_MMAP); } static inline int is_pfn_mapping(struct vm_area_struct *vma) diff --git a/mm/memory.c b/mm/memory.c index baa999e87cd2..d7df5babcba9 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1665,9 +1665,10 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, * behaviour that some programs depend on. We mark the "original" * un-COW'ed pages by matching them up with "vma->vm_pgoff". */ - if (addr == vma->vm_start && end == vma->vm_end) + if (addr == vma->vm_start && end == vma->vm_end) { vma->vm_pgoff = pfn; - else if (is_cow_mapping(vma->vm_flags)) + vma->vm_flags |= VM_PFNMAP_AT_MMAP; + } else if (is_cow_mapping(vma->vm_flags)) return -EINVAL; vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP; @@ -1679,6 +1680,7 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, * needed from higher level routine calling unmap_vmas */ vma->vm_flags &= ~(VM_IO | VM_RESERVED | VM_PFNMAP); + vma->vm_flags &= ~VM_PFNMAP_AT_MMAP; return -EINVAL; } From 773e673de27297d07d852e7e9bfd1a695cae1da2 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 12 Mar 2009 21:35:18 -0700 Subject: [PATCH 65/71] x86: fix e820_update_range() Impact: fix left range size on head | commit 5c0e6f035df983210e4d22213aed624ced502d3d | x86: fix code paths used by update_mptable | Impact: fix crashes under Xen due to unrobust e820 code fixes one e820 bug, but introduces another bug. Need to update size for left range at first in case it is header. also add __e820_add_region take more parameter. Signed-off-by: Yinghai Lu Cc: jbeulich@novell.com LKML-Reference: <49B9E286.502@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 45 ++++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 21 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 3cf6681ac80d..95b81c18b6bc 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -110,19 +110,25 @@ int __init e820_all_mapped(u64 start, u64 end, unsigned type) /* * Add a memory region to the kernel e820 map. */ -void __init e820_add_region(u64 start, u64 size, int type) +static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size, + int type) { - int x = e820.nr_map; + int x = e820x->nr_map; - if (x == ARRAY_SIZE(e820.map)) { + if (x == ARRAY_SIZE(e820x->map)) { printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); return; } - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; + e820x->map[x].addr = start; + e820x->map[x].size = size; + e820x->map[x].type = type; + e820x->nr_map++; +} + +void __init e820_add_region(u64 start, u64 size, int type) +{ + __e820_add_region(&e820, start, size, type); } void __init e820_print_map(char *who) @@ -417,11 +423,11 @@ static int __init append_e820_map(struct e820entry *biosmap, int nr_map) return __append_e820_map(biosmap, nr_map); } -static u64 __init e820_update_range_map(struct e820map *e820x, u64 start, +static u64 __init __e820_update_range(struct e820map *e820x, u64 start, u64 size, unsigned old_type, unsigned new_type) { - unsigned int i, x; + unsigned int i; u64 real_updated_size = 0; BUG_ON(old_type == new_type); @@ -447,22 +453,19 @@ static u64 __init e820_update_range_map(struct e820map *e820x, u64 start, if (final_start >= final_end) continue; - x = e820x->nr_map; - if (x == ARRAY_SIZE(e820x->map)) { - printk(KERN_ERR "Too many memory map entries!\n"); - break; - } - e820x->map[x].addr = final_start; - e820x->map[x].size = final_end - final_start; - e820x->map[x].type = new_type; - e820x->nr_map++; + __e820_add_region(e820x, final_start, final_end - final_start, + new_type); real_updated_size += final_end - final_start; + /* + * left range could be head or tail, so need to update + * size at first. + */ + ei->size -= final_end - final_start; if (ei->addr < final_start) continue; ei->addr = final_end; - ei->size -= final_end - final_start; } return real_updated_size; } @@ -470,13 +473,13 @@ static u64 __init e820_update_range_map(struct e820map *e820x, u64 start, u64 __init e820_update_range(u64 start, u64 size, unsigned old_type, unsigned new_type) { - return e820_update_range_map(&e820, start, size, old_type, new_type); + return __e820_update_range(&e820, start, size, old_type, new_type); } static u64 __init e820_update_range_saved(u64 start, u64 size, unsigned old_type, unsigned new_type) { - return e820_update_range_map(&e820_saved, start, size, old_type, + return __e820_update_range(&e820_saved, start, size, old_type, new_type); } From 5a8ac9d28dae5330c70562c7d7785f5104059c17 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Am=C3=A9rico=20Wang?= Date: Fri, 13 Mar 2009 15:56:58 +0800 Subject: [PATCH 66/71] x86: ptrace, bts: fix an unreachable statement Commit c2724775ce57c98b8af9694857b941dc61056516 put a statement after return, which makes that statement unreachable. Move that statement before return. Signed-off-by: WANG Cong Cc: Roland McGrath Cc: Markus Metzger LKML-Reference: <20090313075622.GB8933@hack> Cc: # .29 only Signed-off-by: Ingo Molnar --- arch/x86/kernel/ptrace.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 3d9672e59c16..19378715f415 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -685,9 +685,8 @@ static int ptrace_bts_config(struct task_struct *child, if (!cfg.signal) return -EINVAL; - return -EOPNOTSUPP; - child->thread.bts_ovfl_signal = cfg.signal; + return -EOPNOTSUPP; } if ((cfg.flags & PTRACE_BTS_O_ALLOC) && From f9a36fa5413f1b2694841c410a6fdb4666e78f16 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 13 Mar 2009 16:37:48 +0100 Subject: [PATCH 67/71] x86: disable __do_IRQ support Impact: disable unused code x86 is fully converted to flow handlers. No need to keep the deprecated __do_IRQ() support active. Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bc2fbadff9f9..3a330a437c6f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -165,6 +165,9 @@ config GENERIC_HARDIRQS bool default y +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y + config GENERIC_IRQ_PROBE bool default y From 9766cdbcb260389669e9679b2aa87c11832f479f Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sat, 14 Mar 2009 11:19:49 +0530 Subject: [PATCH 68/71] x86: cpu/common.c cleanups - fix various style problems - declare varibles before they get used - introduced clear_all_debug_regs - fix header files issues LKML-Reference: <1237009789.4387.2.camel@localhost.localdomain> Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Ingo Molnar --- arch/x86/include/asm/processor.h | 3 + arch/x86/kernel/cpu/common.c | 139 ++++++++++++++++--------------- 2 files changed, 73 insertions(+), 69 deletions(-) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 76139506c3e4..dccef5be0fc1 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -391,6 +391,9 @@ DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); DECLARE_INIT_PER_CPU(irq_stack_union); DECLARE_PER_CPU(char *, irq_stack_ptr); +DECLARE_PER_CPU(unsigned int, irq_count); +extern unsigned long kernel_eflags; +extern asmlinkage void ignore_sysret(void); #else /* X86_64 */ #ifdef CONFIG_CC_STACKPROTECTOR DECLARE_PER_CPU(unsigned long, stack_canary); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 826d5c876278..cad6878c88db 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1,52 +1,52 @@ -#include -#include -#include -#include -#include -#include -#include -#include #include -#include -#include +#include +#include +#include +#include +#include #include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include +#include + +#include #include -#include -#include -#include -#include -#include -#include -#include +#include +#include +#include #include +#include +#include +#include +#include #include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include #ifdef CONFIG_X86_LOCAL_APIC #include #endif -#include -#include -#include -#include -#include -#include -#include -#include -#include - #include "cpu.h" #ifdef CONFIG_X86_64 /* all of these masks are initialized in setup_cpu_local_masks() */ -cpumask_var_t cpu_callin_mask; -cpumask_var_t cpu_callout_mask; cpumask_var_t cpu_initialized_mask; +cpumask_var_t cpu_callout_mask; +cpumask_var_t cpu_callin_mask; /* representing cpus for which sibling maps can be computed */ cpumask_var_t cpu_sibling_setup_mask; @@ -62,10 +62,10 @@ void __init setup_cpu_local_masks(void) #else /* CONFIG_X86_32 */ -cpumask_t cpu_callin_map; +cpumask_t cpu_sibling_setup_map; cpumask_t cpu_callout_map; cpumask_t cpu_initialized; -cpumask_t cpu_sibling_setup_map; +cpumask_t cpu_callin_map; #endif /* CONFIG_X86_32 */ @@ -79,7 +79,7 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { * IRET will check the segment types kkeil 2000/10/28 * Also sysret mandates a special GDT layout * - * The TLS descriptors are currently at a different place compared to i386. + * TLS descriptors are currently at a different place compared to i386. * Hopefully nobody expects them at a fixed place (Wine?) */ [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, @@ -243,6 +243,7 @@ cpuid_dependent_features[] = { static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn) { const struct cpuid_dependent_feature *df; + for (df = cpuid_dependent_features; df->feature; df++) { /* * Note: cpuid_level is set to -1 if unavailable, but @@ -364,12 +365,12 @@ static void __cpuinit get_model_name(struct cpuinfo_x86 *c) undo that brain damage */ p = q = &c->x86_model_id[0]; while (*p == ' ') - p++; + p++; if (p != q) { - while (*p) - *q++ = *p++; - while (q <= &c->x86_model_id[48]) - *q++ = '\0'; /* Zero-pad the rest */ + while (*p) + *q++ = *p++; + while (q <= &c->x86_model_id[48]) + *q++ = '\0'; /* Zero-pad the rest */ } } @@ -441,14 +442,15 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) } else if (smp_num_siblings > 1) { if (smp_num_siblings > nr_cpu_ids) { - printk(KERN_WARNING "CPU: Unsupported number of siblings %d", - smp_num_siblings); + pr_warning("CPU: Unsupported number of siblings %d", + smp_num_siblings); smp_num_siblings = 1; return; } index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, index_msb); + c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, + index_msb); smp_num_siblings = smp_num_siblings / c->x86_max_cores; @@ -491,7 +493,8 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) if (!printed) { printed++; - printk(KERN_ERR "CPU: vendor_id '%s' unknown, using generic init.\n", v); + printk(KERN_ERR "CPU: vendor_id '%s'" + "unknown, using generic init.\n", v); printk(KERN_ERR "CPU: Your system may be unstable.\n"); } @@ -637,7 +640,7 @@ void __init early_cpu_init(void) struct cpu_dev **cdev; int count = 0; - printk("KERNEL supported cpus:\n"); + printk(KERN_INFO "KERNEL supported cpus:\n"); for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) { struct cpu_dev *cpudev = *cdev; unsigned int j; @@ -650,7 +653,7 @@ void __init early_cpu_init(void) for (j = 0; j < 2; j++) { if (!cpudev->c_ident[j]) continue; - printk(" %s %s\n", cpudev->c_vendor, + printk(KERN_INFO " %s %s\n", cpudev->c_vendor, cpudev->c_ident[j]); } } @@ -952,8 +955,6 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks [(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]) __aligned(PAGE_SIZE); -extern asmlinkage void ignore_sysret(void); - /* May not be marked __init: used by software suspend */ void syscall_init(void) { @@ -999,6 +1000,22 @@ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) } #endif /* x86_64 */ +/* + * Clear all 6 debug registers: + */ +static void clear_all_debug_regs(void) +{ + int i; + + for (i = 0; i < 8; i++) { + /* Ignore db4, db5 */ + if ((i == 4) || (i == 5)) + continue; + + set_debugreg(0, i); + } +} + /* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT @@ -1098,17 +1115,7 @@ void __cpuinit cpu_init(void) arch_kgdb_ops.correct_hw_break(); else #endif - { - /* - * Clear all 6 debug registers: - */ - set_debugreg(0UL, 0); - set_debugreg(0UL, 1); - set_debugreg(0UL, 2); - set_debugreg(0UL, 3); - set_debugreg(0UL, 6); - set_debugreg(0UL, 7); - } + clear_all_debug_regs(); fpu_init(); @@ -1129,7 +1136,8 @@ void __cpuinit cpu_init(void) if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask)) { printk(KERN_WARNING "CPU#%d already initialized!\n", cpu); - for (;;) local_irq_enable(); + for (;;) + local_irq_enable(); } printk(KERN_INFO "Initializing CPU#%d\n", cpu); @@ -1159,13 +1167,7 @@ void __cpuinit cpu_init(void) __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); #endif - /* Clear all 6 debug registers: */ - set_debugreg(0, 0); - set_debugreg(0, 1); - set_debugreg(0, 2); - set_debugreg(0, 3); - set_debugreg(0, 6); - set_debugreg(0, 7); + clear_all_debug_regs(); /* * Force FPU initialization: @@ -1186,5 +1188,4 @@ void __cpuinit cpu_init(void) xsave_init(); } - #endif From 88200bc28da38bcda1cb1bd218216e83b426d8a8 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sat, 14 Mar 2009 12:08:13 +0530 Subject: [PATCH 69/71] x86: entry_32.S fix compile warnings - fix work mask bit width Fix: arch/x86/kernel/entry_32.S:446: Warning: 00000000080001d1 shortened to 00000000000001d1 arch/x86/kernel/entry_32.S:457: Warning: 000000000800feff shortened to 000000000000feff arch/x86/kernel/entry_32.S:527: Warning: 00000000080001d1 shortened to 00000000000001d1 arch/x86/kernel/entry_32.S:541: Warning: 000000000800feff shortened to 000000000000feff arch/x86/kernel/entry_32.S:676: Warning: 0000000008000091 shortened to 0000000000000091 TIF_SYSCALL_FTRACE is 0x08000000 and until now we checked the first 16 bits of the work mask - bit 27 falls outside of that. Update the entry_32.S code to check the full 32-bit mask. [ %cx => %ecx fix from Cyrill Gorcunov ] Signed-off-by: Jaswinder Singh Rajput Cc: Frederic Weisbecker Cc: Steven Rostedt Cc: "H. Peter Anvin" LKML-Reference: <1237012693.18733.3.camel@ht.satnam> Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_32.S | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 899e8938e79f..c929add475c9 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -442,8 +442,7 @@ sysenter_past_esp: GET_THREAD_INFO(%ebp) - /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) jnz sysenter_audit sysenter_do_call: cmpl $(nr_syscalls), %eax @@ -454,7 +453,7 @@ sysenter_do_call: DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx - testw $_TIF_ALLWORK_MASK, %cx + testl $_TIF_ALLWORK_MASK, %ecx jne sysexit_audit sysenter_exit: /* if something modifies registers it must also disable sysexit */ @@ -468,7 +467,7 @@ sysenter_exit: #ifdef CONFIG_AUDITSYSCALL sysenter_audit: - testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp) + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp) jnz syscall_trace_entry addl $4,%esp CFI_ADJUST_CFA_OFFSET -4 @@ -485,7 +484,7 @@ sysenter_audit: jmp sysenter_do_call sysexit_audit: - testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx jne syscall_exit_work TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_ANY) @@ -498,7 +497,7 @@ sysexit_audit: DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx - testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx + testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %ecx jne syscall_exit_work movl PT_EAX(%esp),%eax /* reload syscall return value */ jmp sysenter_exit @@ -523,8 +522,7 @@ ENTRY(system_call) SAVE_ALL GET_THREAD_INFO(%ebp) # system call tracing in operation / emulation - /* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */ - testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp) jnz syscall_trace_entry cmpl $(nr_syscalls), %eax jae syscall_badsys @@ -538,7 +536,7 @@ syscall_exit: # between sampling and the iret TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx - testw $_TIF_ALLWORK_MASK, %cx # current->work + testl $_TIF_ALLWORK_MASK, %ecx # current->work jne syscall_exit_work restore_all: @@ -673,7 +671,7 @@ END(syscall_trace_entry) # perform syscall exit tracing ALIGN syscall_exit_work: - testb $_TIF_WORK_SYSCALL_EXIT, %cl + testl $_TIF_WORK_SYSCALL_EXIT, %ecx jz work_pending TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_ANY) # could let syscall_trace_leave() call From 895791dac6946d535991edd11341046f8e85ea77 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Fri, 13 Mar 2009 16:35:44 -0700 Subject: [PATCH 70/71] VM, x86, PAT: add a new vm flag to track full pfnmap at mmap Impact: cleanup Add a new vm flag VM_PFN_AT_MMAP to identify a PFNMAP that is fully mapped with remap_pfn_range. Patch removes the overloading of VM_INSERTPAGE from the earlier patch. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Acked-by: Nick Piggin LKML-Reference: <20090313233543.GA19909@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar --- include/linux/mm.h | 16 +++------------- mm/memory.c | 4 ++-- 2 files changed, 5 insertions(+), 15 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index 3daa05feed9f..b1ea37fc7a24 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -98,12 +98,13 @@ extern unsigned int kobjsize(const void *objp); #define VM_HUGETLB 0x00400000 /* Huge TLB Page VM */ #define VM_NONLINEAR 0x00800000 /* Is non-linear (remap_file_pages) */ #define VM_MAPPED_COPY 0x01000000 /* T if mapped copy of data (nommu mmap) */ -#define VM_INSERTPAGE 0x02000000 /* The vma has had "vm_insert_page()" done on it. Refer note in VM_PFNMAP_AT_MMAP below */ +#define VM_INSERTPAGE 0x02000000 /* The vma has had "vm_insert_page()" done on it */ #define VM_ALWAYSDUMP 0x04000000 /* Always include in core dumps */ #define VM_CAN_NONLINEAR 0x08000000 /* Has ->fault & does nonlinear pages */ #define VM_MIXEDMAP 0x10000000 /* Can contain "struct page" and pure PFN pages */ #define VM_SAO 0x20000000 /* Strong Access Ordering (powerpc) */ +#define VM_PFN_AT_MMAP 0x40000000 /* PFNMAP vma that is fully mapped at mmap time */ #ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */ #define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS @@ -126,17 +127,6 @@ extern unsigned int kobjsize(const void *objp); */ #define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_RESERVED | VM_PFNMAP) -/* - * pfnmap vmas that are fully mapped at mmap time (not mapped on fault). - * Used by x86 PAT to identify such PFNMAP mappings and optimize their handling. - * Note VM_INSERTPAGE flag is overloaded here. i.e, - * VM_INSERTPAGE && !VM_PFNMAP implies - * The vma has had "vm_insert_page()" done on it - * VM_INSERTPAGE && VM_PFNMAP implies - * The vma is PFNMAP with full mapping at mmap time - */ -#define VM_PFNMAP_AT_MMAP (VM_INSERTPAGE | VM_PFNMAP) - /* * mapping from the currently active vm_flags protection bits (the * low four bits) to a page protection mask.. @@ -156,7 +146,7 @@ extern pgprot_t protection_map[16]; */ static inline int is_linear_pfn_mapping(struct vm_area_struct *vma) { - return ((vma->vm_flags & VM_PFNMAP_AT_MMAP) == VM_PFNMAP_AT_MMAP); + return (vma->vm_flags & VM_PFN_AT_MMAP); } static inline int is_pfn_mapping(struct vm_area_struct *vma) diff --git a/mm/memory.c b/mm/memory.c index d7df5babcba9..2032ad2fc34b 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1667,7 +1667,7 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, */ if (addr == vma->vm_start && end == vma->vm_end) { vma->vm_pgoff = pfn; - vma->vm_flags |= VM_PFNMAP_AT_MMAP; + vma->vm_flags |= VM_PFN_AT_MMAP; } else if (is_cow_mapping(vma->vm_flags)) return -EINVAL; @@ -1680,7 +1680,7 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr, * needed from higher level routine calling unmap_vmas */ vma->vm_flags &= ~(VM_IO | VM_RESERVED | VM_PFNMAP); - vma->vm_flags &= ~VM_PFNMAP_AT_MMAP; + vma->vm_flags &= ~VM_PFN_AT_MMAP; return -EINVAL; } From 0f3fa48a7eaf5d1118cfda1650e8c759b2a116e4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 14 Mar 2009 08:46:17 +0100 Subject: [PATCH 71/71] x86: cpu/common.c more cleanups Complete/fix the cleanups of cpu/common.c: - fix ugly warning due to asm/topology.h -> linux/topology.h change - standardize the style across the file - simplify/refactor the code flow where possible Cc: Jaswinder Singh Rajput LKML-Reference: <1237009789.4387.2.camel@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/common.c | 251 ++++++++++++++++++++--------------- 1 file changed, 147 insertions(+), 104 deletions(-) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index cad6878c88db..a9e3791ca098 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1,4 +1,3 @@ -#include #include #include #include @@ -18,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -82,45 +82,45 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { * TLS descriptors are currently at a different place compared to i386. * Hopefully nobody expects them at a fixed place (Wine?) */ - [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, - [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, - [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, - [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, - [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, - [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, + [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, + [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, + [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, + [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, + [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, + [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, #else - [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } }, - [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } }, - [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } }, - [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff200 } } }, + [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } }, + [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } }, + [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } }, + [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff200 } } }, /* * Segments used for calling PnP BIOS have byte granularity. * They code segments and data segments have fixed 64k limits, * the transfer segment sizes are set at run time. */ /* 32-bit code */ - [GDT_ENTRY_PNPBIOS_CS32] = { { { 0x0000ffff, 0x00409a00 } } }, + [GDT_ENTRY_PNPBIOS_CS32] = { { { 0x0000ffff, 0x00409a00 } } }, /* 16-bit code */ - [GDT_ENTRY_PNPBIOS_CS16] = { { { 0x0000ffff, 0x00009a00 } } }, + [GDT_ENTRY_PNPBIOS_CS16] = { { { 0x0000ffff, 0x00009a00 } } }, /* 16-bit data */ - [GDT_ENTRY_PNPBIOS_DS] = { { { 0x0000ffff, 0x00009200 } } }, + [GDT_ENTRY_PNPBIOS_DS] = { { { 0x0000ffff, 0x00009200 } } }, /* 16-bit data */ - [GDT_ENTRY_PNPBIOS_TS1] = { { { 0x00000000, 0x00009200 } } }, + [GDT_ENTRY_PNPBIOS_TS1] = { { { 0x00000000, 0x00009200 } } }, /* 16-bit data */ - [GDT_ENTRY_PNPBIOS_TS2] = { { { 0x00000000, 0x00009200 } } }, + [GDT_ENTRY_PNPBIOS_TS2] = { { { 0x00000000, 0x00009200 } } }, /* * The APM segments have byte granularity and their bases * are set at run time. All have 64k limits. */ /* 32-bit code */ - [GDT_ENTRY_APMBIOS_BASE] = { { { 0x0000ffff, 0x00409a00 } } }, + [GDT_ENTRY_APMBIOS_BASE] = { { { 0x0000ffff, 0x00409a00 } } }, /* 16-bit code */ - [GDT_ENTRY_APMBIOS_BASE+1] = { { { 0x0000ffff, 0x00009a00 } } }, + [GDT_ENTRY_APMBIOS_BASE+1] = { { { 0x0000ffff, 0x00009a00 } } }, /* data */ - [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } }, + [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } }, - [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, - [GDT_ENTRY_PERCPU] = { { { 0x0000ffff, 0x00cf9200 } } }, + [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, + [GDT_ENTRY_PERCPU] = { { { 0x0000ffff, 0x00cf9200 } } }, GDT_STACK_CANARY_INIT #endif } }; @@ -164,16 +164,17 @@ static inline int flag_is_changeable_p(u32 flag) * the CPUID. Add "volatile" to not allow gcc to * optimize the subsequent calls to this function. */ - asm volatile ("pushfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "movl %0,%1\n\t" - "xorl %2,%0\n\t" - "pushl %0\n\t" - "popfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "popfl\n\t" + asm volatile ("pushfl \n\t" + "pushfl \n\t" + "popl %0 \n\t" + "movl %0, %1 \n\t" + "xorl %2, %0 \n\t" + "pushl %0 \n\t" + "popfl \n\t" + "pushfl \n\t" + "popl %0 \n\t" + "popfl \n\t" + : "=&r" (f1), "=&r" (f2) : "ir" (flag)); @@ -188,18 +189,22 @@ static int __cpuinit have_cpuid_p(void) static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) { - if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { - /* Disable processor serial number */ - unsigned long lo, hi; - rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - lo |= 0x200000; - wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - printk(KERN_NOTICE "CPU serial number disabled.\n"); - clear_cpu_cap(c, X86_FEATURE_PN); + unsigned long lo, hi; - /* Disabling the serial number may affect the cpuid level */ - c->cpuid_level = cpuid_eax(0); - } + if (!cpu_has(c, X86_FEATURE_PN) || !disable_x86_serial_nr) + return; + + /* Disable processor serial number: */ + + rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); + lo |= 0x200000; + wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); + + printk(KERN_NOTICE "CPU serial number disabled.\n"); + clear_cpu_cap(c, X86_FEATURE_PN); + + /* Disabling the serial number may affect the cpuid level */ + c->cpuid_level = cpuid_eax(0); } static int __init x86_serial_nr_setup(char *s) @@ -232,6 +237,7 @@ struct cpuid_dependent_feature { u32 feature; u32 level; }; + static const struct cpuid_dependent_feature __cpuinitconst cpuid_dependent_features[] = { { X86_FEATURE_MWAIT, 0x00000005 }, @@ -245,6 +251,9 @@ static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn) const struct cpuid_dependent_feature *df; for (df = cpuid_dependent_features; df->feature; df++) { + + if (!cpu_has(c, df->feature)) + continue; /* * Note: cpuid_level is set to -1 if unavailable, but * extended_extended_level is set to 0 if unavailable @@ -252,26 +261,26 @@ static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn) * when signed; hence the weird messing around with * signs here... */ - if (cpu_has(c, df->feature) && - ((s32)df->level < 0 ? + if (!((s32)df->level < 0 ? (u32)df->level > (u32)c->extended_cpuid_level : - (s32)df->level > (s32)c->cpuid_level)) { - clear_cpu_cap(c, df->feature); - if (warn) - printk(KERN_WARNING - "CPU: CPU feature %s disabled " - "due to lack of CPUID level 0x%x\n", - x86_cap_flags[df->feature], - df->level); - } + (s32)df->level > (s32)c->cpuid_level)) + continue; + + clear_cpu_cap(c, df->feature); + if (!warn) + continue; + + printk(KERN_WARNING + "CPU: CPU feature %s disabled, no CPUID level 0x%x\n", + x86_cap_flags[df->feature], df->level); } } /* * Naming convention should be: [()] * This table only is used unless init_() below doesn't set it; - * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used - * + * in particular, if CPUID levels 0x80000002..4 are supported, this + * isn't used */ /* Look up CPU names by table lookup. */ @@ -308,8 +317,10 @@ void load_percpu_segment(int cpu) load_stack_canary_segment(); } -/* Current gdt points %fs at the "master" per-cpu area: after this, - * it's on the real one. */ +/* + * Current gdt points %fs at the "master" per-cpu area: after this, + * it's on the real one. + */ void switch_to_new_gdt(int cpu) { struct desc_ptr gdt_descr; @@ -355,14 +366,16 @@ static void __cpuinit get_model_name(struct cpuinfo_x86 *c) if (c->extended_cpuid_level < 0x80000004) return; - v = (unsigned int *) c->x86_model_id; + v = (unsigned int *)c->x86_model_id; cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); c->x86_model_id[48] = 0; - /* Intel chips right-justify this string for some dumb reason; - undo that brain damage */ + /* + * Intel chips right-justify this string for some dumb reason; + * undo that brain damage: + */ p = q = &c->x86_model_id[0]; while (*p == ' ') p++; @@ -439,29 +452,31 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) if (smp_num_siblings == 1) { printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { - - if (smp_num_siblings > nr_cpu_ids) { - pr_warning("CPU: Unsupported number of siblings %d", - smp_num_siblings); - smp_num_siblings = 1; - return; - } - - index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, - index_msb); - - smp_num_siblings = smp_num_siblings / c->x86_max_cores; - - index_msb = get_count_order(smp_num_siblings); - - core_bits = get_count_order(c->x86_max_cores); - - c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, index_msb) & - ((1 << core_bits) - 1); + goto out; } + if (smp_num_siblings <= 1) + goto out; + + if (smp_num_siblings > nr_cpu_ids) { + pr_warning("CPU: Unsupported number of siblings %d", + smp_num_siblings); + smp_num_siblings = 1; + return; + } + + index_msb = get_count_order(smp_num_siblings); + c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, index_msb); + + smp_num_siblings = smp_num_siblings / c->x86_max_cores; + + index_msb = get_count_order(smp_num_siblings); + + core_bits = get_count_order(c->x86_max_cores); + + c->cpu_core_id = apic->phys_pkg_id(c->initial_apicid, index_msb) & + ((1 << core_bits) - 1); + out: if ((c->x86_max_cores * smp_num_siblings) > 1) { printk(KERN_INFO "CPU: Physical Processor ID: %d\n", @@ -475,8 +490,8 @@ out: static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; - int i; static int printed; + int i; for (i = 0; i < X86_VENDOR_NUM; i++) { if (!cpu_devs[i]) @@ -485,6 +500,7 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) if (!strcmp(v, cpu_devs[i]->c_ident[0]) || (cpu_devs[i]->c_ident[1] && !strcmp(v, cpu_devs[i]->c_ident[1]))) { + this_cpu = cpu_devs[i]; c->x86_vendor = this_cpu->c_x86_vendor; return; @@ -493,8 +509,9 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) if (!printed) { printed++; - printk(KERN_ERR "CPU: vendor_id '%s'" - "unknown, using generic init.\n", v); + printk(KERN_ERR + "CPU: vendor_id '%s' unknown, using generic init.\n", v); + printk(KERN_ERR "CPU: Your system may be unstable.\n"); } @@ -514,14 +531,17 @@ void __cpuinit cpu_detect(struct cpuinfo_x86 *c) /* Intel-defined flags: level 0x00000001 */ if (c->cpuid_level >= 0x00000001) { u32 junk, tfms, cap0, misc; + cpuid(0x00000001, &tfms, &misc, &junk, &cap0); c->x86 = (tfms >> 8) & 0xf; c->x86_model = (tfms >> 4) & 0xf; c->x86_mask = tfms & 0xf; + if (c->x86 == 0xf) c->x86 += (tfms >> 20) & 0xff; if (c->x86 >= 0x6) c->x86_model += ((tfms >> 16) & 0xf) << 4; + if (cap0 & (1<<19)) { c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; c->x86_cache_alignment = c->x86_clflush_size; @@ -537,6 +557,7 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) /* Intel-defined flags: level 0x00000001 */ if (c->cpuid_level >= 0x00000001) { u32 capability, excap; + cpuid(0x00000001, &tfms, &ebx, &excap, &capability); c->x86_capability[0] = capability; c->x86_capability[4] = excap; @@ -545,6 +566,7 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) /* AMD-defined flags: level 0x80000001 */ xlvl = cpuid_eax(0x80000000); c->extended_cpuid_level = xlvl; + if ((xlvl & 0xffff0000) == 0x80000000) { if (xlvl >= 0x80000001) { c->x86_capability[1] = cpuid_edx(0x80000001); @@ -762,8 +784,8 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) squash_the_stupid_serial_number(c); /* - * The vendor-specific functions might have changed features. Now - * we do "generic changes." + * The vendor-specific functions might have changed features. + * Now we do "generic changes." */ /* Filter out anything that depends on CPUID levels we don't have */ @@ -846,8 +868,8 @@ void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) } struct msr_range { - unsigned min; - unsigned max; + unsigned min; + unsigned max; }; static struct msr_range msr_range_array[] __cpuinitdata = { @@ -859,14 +881,15 @@ static struct msr_range msr_range_array[] __cpuinitdata = { static void __cpuinit print_cpu_msr(void) { + unsigned index_min, index_max; unsigned index; u64 val; int i; - unsigned index_min, index_max; for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) { index_min = msr_range_array[i].min; index_max = msr_range_array[i].max; + for (index = index_min; index < index_max; index++) { if (rdmsrl_amd_safe(index, &val)) continue; @@ -876,6 +899,7 @@ static void __cpuinit print_cpu_msr(void) } static int show_msr __cpuinitdata; + static __init int setup_show_msr(char *arg) { int num; @@ -899,10 +923,12 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) { char *vendor = NULL; - if (c->x86_vendor < X86_VENDOR_NUM) + if (c->x86_vendor < X86_VENDOR_NUM) { vendor = this_cpu->c_vendor; - else if (c->cpuid_level >= 0) - vendor = c->x86_vendor_id; + } else { + if (c->cpuid_level >= 0) + vendor = c->x86_vendor_id; + } if (vendor && !strstr(c->x86_model_id, vendor)) printk(KERN_CONT "%s ", vendor); @@ -929,10 +955,12 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) static __init int setup_disablecpuid(char *arg) { int bit; + if (get_option(&arg, &bit) && bit < NCAPINTS*32) setup_clear_cpu_cap(bit); else return 0; + return 1; } __setup("clearcpuid=", setup_disablecpuid); @@ -942,6 +970,7 @@ struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; DEFINE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union) __aligned(PAGE_SIZE); + DEFINE_PER_CPU(char *, irq_stack_ptr) = init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64; @@ -951,6 +980,17 @@ EXPORT_PER_CPU_SYMBOL(kernel_stack); DEFINE_PER_CPU(unsigned int, irq_count) = -1; +/* + * Special IST stacks which the CPU switches to when it calls + * an IST-marked descriptor entry. Up to 7 stacks (hardware + * limit), all of them are 4K, except the debug stack which + * is 8K. + */ +static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = { + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ, + [DEBUG_STACK - 1] = DEBUG_STKSZ +}; + static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks [(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]) __aligned(PAGE_SIZE); @@ -984,7 +1024,7 @@ unsigned long kernel_eflags; */ DEFINE_PER_CPU(struct orig_ist, orig_ist); -#else /* x86_64 */ +#else /* CONFIG_X86_64 */ #ifdef CONFIG_CC_STACKPROTECTOR DEFINE_PER_CPU(unsigned long, stack_canary); @@ -996,9 +1036,10 @@ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) memset(regs, 0, sizeof(struct pt_regs)); regs->fs = __KERNEL_PERCPU; regs->gs = __KERNEL_STACK_CANARY; + return regs; } -#endif /* x86_64 */ +#endif /* CONFIG_X86_64 */ /* * Clear all 6 debug registers: @@ -1024,15 +1065,20 @@ static void clear_all_debug_regs(void) * A lot of state is already set up in PDA init for 64 bit */ #ifdef CONFIG_X86_64 + void __cpuinit cpu_init(void) { - int cpu = stack_smp_processor_id(); - struct tss_struct *t = &per_cpu(init_tss, cpu); - struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); - unsigned long v; + struct orig_ist *orig_ist; struct task_struct *me; + struct tss_struct *t; + unsigned long v; + int cpu; int i; + cpu = stack_smp_processor_id(); + t = &per_cpu(init_tss, cpu); + orig_ist = &per_cpu(orig_ist, cpu); + #ifdef CONFIG_NUMA if (cpu != 0 && percpu_read(node_number) == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) @@ -1073,19 +1119,17 @@ void __cpuinit cpu_init(void) * set up and load the per-CPU TSS */ if (!orig_ist->ist[0]) { - static const unsigned int sizes[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ, - [DEBUG_STACK - 1] = DEBUG_STKSZ - }; char *estacks = per_cpu(exception_stacks, cpu); + for (v = 0; v < N_EXCEPTION_STACKS; v++) { - estacks += sizes[v]; + estacks += exception_stack_sizes[v]; orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks; } } t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + /* * <= is required because the CPU will access up to * 8 bits beyond the end of the IO permission bitmap. @@ -1187,5 +1231,4 @@ void __cpuinit cpu_init(void) xsave_init(); } - #endif