OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

pasemi_mac: A couple of minor bugfixes. 

Bugfixes:

* Move the wake_queue logic from tx_intr to clean_tx
* Always do wake_queue even if queue wasn't full before clean since
  it's safe to do
* Fix polarity in checks in pasemi_mac_close

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Olof Johansson 2007-04-28 15:36:40 -05:00 committed by Jeff Garzik
parent 5b94f675f5
commit 0ce68c7416
1 changed files with 8 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
drivers/net/pasemi_mac.c
View File

@ -476,6 +476,8 @@ static int pasemi_mac_clean_tx(struct pasemi_mac *mac)
mac->tx->next_to_clean += count;
spin_unlock_irqrestore(&mac->tx->lock, flags);
netif_wake_queue(mac->netdev);
return count;
}
@ -510,9 +512,6 @@ static irqreturn_t pasemi_mac_tx_intr(int irq, void *data)
struct net_device *dev = data;
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int reg;
int was_full;
was_full = mac->tx->next_to_clean - mac->tx->next_to_use == TX_RING_SIZE;
if (!(*mac->tx_status & PAS_STATUS_INT))
return IRQ_NONE;
@ -526,9 +525,6 @@ static irqreturn_t pasemi_mac_tx_intr(int irq, void *data)
pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_RESET(mac->dma_txch),
reg);
if (was_full)
netif_wake_queue(dev);
return IRQ_HANDLED;
}
@ -660,40 +656,37 @@ static int pasemi_mac_close(struct net_device *dev)
pci_read_config_dword(mac->dma_pdev,
PAS_DMA_TXCHAN_TCMDSTA(mac->dma_txch),
&stat);
if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)
if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT))
break;
cond_resched();
}
if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)) {
if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)
dev_err(&mac->dma_pdev->dev, "Failed to stop tx channel\n");
}
for (retries = 0; retries < MAX_RETRIES; retries++) {
pci_read_config_dword(mac->dma_pdev,
PAS_DMA_RXCHAN_CCMDSTA(mac->dma_rxch),
&stat);
if (stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)
if (!(stat & PAS_DMA_RXCHAN_CCMDSTA_ACT))
break;
cond_resched();
}
if (!(stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)) {
if (stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)
dev_err(&mac->dma_pdev->dev, "Failed to stop rx channel\n");
}
for (retries = 0; retries < MAX_RETRIES; retries++) {
pci_read_config_dword(mac->dma_pdev,
PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
&stat);
if (stat & PAS_DMA_RXINT_RCMDSTA_ACT)
if (!(stat & PAS_DMA_RXINT_RCMDSTA_ACT))
break;
cond_resched();
}
if (!(stat & PAS_DMA_RXINT_RCMDSTA_ACT)) {
if (stat & PAS_DMA_RXINT_RCMDSTA_ACT)
dev_err(&mac->dma_pdev->dev, "Failed to stop rx interface\n");
}
/* Then, disable the channel. This must be done separately from
* stopping, since you can't disable when active.