diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index 0f882ecb7d81..6ec300549960 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -120,182 +120,156 @@ struct pl08x_channel_data spear300_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, }; diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index bbcf4571d361..1d0e435b9045 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -205,182 +205,156 @@ struct pl08x_channel_data spear310_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart2_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart2_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart3_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart3_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart4_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart4_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart5_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart5_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, }; diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 88d483bcd66a..fd823c624575 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -213,182 +213,156 @@ struct pl08x_channel_data spear320_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c0_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c0_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp1_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp1_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart1_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart1_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart2_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart2_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c1_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c1_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c2_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c2_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2s_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2s_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "rs485_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "rs485_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, }; diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 0f41bd1c47c3..d6cd8403fe66 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -46,7 +46,8 @@ struct pl022_ssp_controller pl022_plat_data = { struct pl08x_platform_data pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", - .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2e2e3596583e..b59ae5369e7b 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -36,336 +36,288 @@ static struct pl08x_channel_data spear600_dma_info[] = { .min_signal = 0, .max_signal = 0, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp1_tx", .min_signal = 1, .max_signal = 1, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_rx", .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_rx", .min_signal = 4, .max_signal = 4, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_tx", .min_signal = 5, .max_signal = 5, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp2_rx", .min_signal = 6, .max_signal = 6, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_tx", .min_signal = 7, .max_signal = 7, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ext0_rx", .min_signal = 0, .max_signal = 0, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext0_tx", .min_signal = 1, .max_signal = 1, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext1_rx", .min_signal = 2, .max_signal = 2, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext1_tx", .min_signal = 3, .max_signal = 3, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext2_rx", .min_signal = 4, .max_signal = 4, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext2_tx", .min_signal = 5, .max_signal = 5, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext3_rx", .min_signal = 6, .max_signal = 6, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext3_tx", .min_signal = 7, .max_signal = 7, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext4_rx", .min_signal = 8, .max_signal = 8, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext4_tx", .min_signal = 9, .max_signal = 9, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext5_rx", .min_signal = 10, .max_signal = 10, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext5_tx", .min_signal = 11, .max_signal = 11, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext6_rx", .min_signal = 12, .max_signal = 12, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext6_tx", .min_signal = 13, .max_signal = 13, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext7_rx", .min_signal = 14, .max_signal = 14, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext7_tx", .min_signal = 15, .max_signal = 15, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, }; @@ -373,7 +325,8 @@ static struct pl08x_channel_data spear600_dma_info[] = { struct pl08x_platform_data pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", - .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h index 2bc6b54460a8..eb6590ded40d 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -14,8 +14,8 @@ #ifndef __PLAT_PL080_H #define __PLAT_PL080_H -struct pl08x_dma_chan; -int pl080_get_signal(struct pl08x_dma_chan *ch); -void pl080_put_signal(struct pl08x_dma_chan *ch); +struct pl08x_channel_data; +int pl080_get_signal(const struct pl08x_channel_data *cd); +void pl080_put_signal(const struct pl08x_channel_data *cd, int signal); #endif /* __PLAT_PL080_H */ diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c index 12cf27f935f9..cfa1199d0f4a 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/plat-spear/pl080.c @@ -27,9 +27,8 @@ struct { unsigned char val; } signals[16] = {{0, 0}, }; -int pl080_get_signal(struct pl08x_dma_chan *ch) +int pl080_get_signal(const struct pl08x_channel_data *cd) { - const struct pl08x_channel_data *cd = ch->cd; unsigned int signal = cd->min_signal, val; unsigned long flags; @@ -63,18 +62,17 @@ int pl080_get_signal(struct pl08x_dma_chan *ch) return signal; } -void pl080_put_signal(struct pl08x_dma_chan *ch) +void pl080_put_signal(const struct pl08x_channel_data *cd, int signal) { - const struct pl08x_channel_data *cd = ch->cd; unsigned long flags; spin_lock_irqsave(&lock, flags); /* if signal is not used */ - if (!signals[cd->min_signal].busy) + if (!signals[signal].busy) BUG(); - signals[cd->min_signal].busy--; + signals[signal].busy--; spin_unlock_irqrestore(&lock, flags); } diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 8be3bf68c0bd..6f93365d9d04 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -53,6 +53,7 @@ config AMBA_PL08X bool "ARM PrimeCell PL080 or PL081 support" depends on ARM_AMBA && EXPERIMENTAL select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS help Platform has a PL08x DMAC device which can provide DMA engine support diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 49ecbbb8932d..6fbeebb9486f 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -86,10 +86,12 @@ #include #include "dmaengine.h" +#include "virt-dma.h" #define DRIVER_NAME "pl08xdmac" static struct amba_driver pl08x_amba_driver; +struct pl08x_driver_data; /** * struct vendor_data - vendor-specific config parameters for PL08x derivatives @@ -118,6 +120,123 @@ struct pl08x_lli { u32 cctl; }; +/** + * struct pl08x_bus_data - information of source or destination + * busses for a transfer + * @addr: current address + * @maxwidth: the maximum width of a transfer on this bus + * @buswidth: the width of this bus in bytes: 1, 2 or 4 + */ +struct pl08x_bus_data { + dma_addr_t addr; + u8 maxwidth; + u8 buswidth; +}; + +/** + * struct pl08x_phy_chan - holder for the physical channels + * @id: physical index to this channel + * @lock: a lock to use when altering an instance of this struct + * @serving: the virtual channel currently being served by this physical + * channel + * @locked: channel unavailable for the system, e.g. dedicated to secure + * world + */ +struct pl08x_phy_chan { + unsigned int id; + void __iomem *base; + spinlock_t lock; + struct pl08x_dma_chan *serving; + bool locked; +}; + +/** + * struct pl08x_sg - structure containing data per sg + * @src_addr: src address of sg + * @dst_addr: dst address of sg + * @len: transfer len in bytes + * @node: node for txd's dsg_list + */ +struct pl08x_sg { + dma_addr_t src_addr; + dma_addr_t dst_addr; + size_t len; + struct list_head node; +}; + +/** + * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor + * @vd: virtual DMA descriptor + * @dsg_list: list of children sg's + * @llis_bus: DMA memory address (physical) start for the LLIs + * @llis_va: virtual memory address start for the LLIs + * @cctl: control reg values for current txd + * @ccfg: config reg values for current txd + * @done: this marks completed descriptors, which should not have their + * mux released. + */ +struct pl08x_txd { + struct virt_dma_desc vd; + struct list_head dsg_list; + dma_addr_t llis_bus; + struct pl08x_lli *llis_va; + /* Default cctl value for LLIs */ + u32 cctl; + /* + * Settings to be put into the physical channel when we + * trigger this txd. Other registers are in llis_va[0]. + */ + u32 ccfg; + bool done; +}; + +/** + * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel + * states + * @PL08X_CHAN_IDLE: the channel is idle + * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport + * channel and is running a transfer on it + * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport + * channel, but the transfer is currently paused + * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport + * channel to become available (only pertains to memcpy channels) + */ +enum pl08x_dma_chan_state { + PL08X_CHAN_IDLE, + PL08X_CHAN_RUNNING, + PL08X_CHAN_PAUSED, + PL08X_CHAN_WAITING, +}; + +/** + * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel + * @vc: wrappped virtual channel + * @phychan: the physical channel utilized by this channel, if there is one + * @name: name of channel + * @cd: channel platform data + * @runtime_addr: address for RX/TX according to the runtime config + * @at: active transaction on this channel + * @lock: a lock for this channel data + * @host: a pointer to the host (internal use) + * @state: whether the channel is idle, paused, running etc + * @slave: whether this channel is a device (slave) or for memcpy + * @signal: the physical DMA request signal which this channel is using + * @mux_use: count of descriptors using this DMA request signal setting + */ +struct pl08x_dma_chan { + struct virt_dma_chan vc; + struct pl08x_phy_chan *phychan; + const char *name; + const struct pl08x_channel_data *cd; + struct dma_slave_config cfg; + struct pl08x_txd *at; + struct pl08x_driver_data *host; + enum pl08x_dma_chan_state state; + bool slave; + int signal; + unsigned mux_use; +}; + /** * struct pl08x_driver_data - the local state holder for the PL08x * @slave: slave engine for this instance @@ -128,7 +247,6 @@ struct pl08x_lli { * @pd: platform data passed in from the platform/machine * @phy_chans: array of data for the physical channels * @pool: a pool for the LLI descriptors - * @pool_ctr: counter of LLIs in the pool * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI * fetches * @mem_buses: set to indicate memory transfers on AHB2. @@ -143,10 +261,8 @@ struct pl08x_driver_data { struct pl08x_platform_data *pd; struct pl08x_phy_chan *phy_chans; struct dma_pool *pool; - int pool_ctr; u8 lli_buses; u8 mem_buses; - spinlock_t lock; }; /* @@ -162,12 +278,51 @@ struct pl08x_driver_data { static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan) { - return container_of(chan, struct pl08x_dma_chan, chan); + return container_of(chan, struct pl08x_dma_chan, vc.chan); } static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx) { - return container_of(tx, struct pl08x_txd, tx); + return container_of(tx, struct pl08x_txd, vd.tx); +} + +/* + * Mux handling. + * + * This gives us the DMA request input to the PL08x primecell which the + * peripheral described by the channel data will be routed to, possibly + * via a board/SoC specific external MUX. One important point to note + * here is that this does not depend on the physical channel. + */ +static int pl08x_request_mux(struct pl08x_dma_chan *plchan) +{ + const struct pl08x_platform_data *pd = plchan->host->pd; + int ret; + + if (plchan->mux_use++ == 0 && pd->get_signal) { + ret = pd->get_signal(plchan->cd); + if (ret < 0) { + plchan->mux_use = 0; + return ret; + } + + plchan->signal = ret; + } + return 0; +} + +static void pl08x_release_mux(struct pl08x_dma_chan *plchan) +{ + const struct pl08x_platform_data *pd = plchan->host->pd; + + if (plchan->signal >= 0) { + WARN_ON(plchan->mux_use == 0); + + if (--plchan->mux_use == 0 && pd->put_signal) { + pd->put_signal(plchan->cd, plchan->signal); + plchan->signal = -1; + } + } } /* @@ -189,20 +344,25 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) * been set when the LLIs were constructed. Poke them into the hardware * and start the transfer. */ -static void pl08x_start_txd(struct pl08x_dma_chan *plchan, - struct pl08x_txd *txd) +static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan) { struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; - struct pl08x_lli *lli = &txd->llis_va[0]; + struct virt_dma_desc *vd = vchan_next_desc(&plchan->vc); + struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); + struct pl08x_lli *lli; u32 val; + list_del(&txd->vd.node); + plchan->at = txd; /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) cpu_relax(); + lli = &txd->llis_va[0]; + dev_vdbg(&pl08x->adev->dev, "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", @@ -311,10 +471,8 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) { struct pl08x_phy_chan *ch; struct pl08x_txd *txd; - unsigned long flags; size_t bytes = 0; - spin_lock_irqsave(&plchan->lock, flags); ch = plchan->phychan; txd = plchan->at; @@ -354,18 +512,6 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) } } - /* Sum up all queued transactions */ - if (!list_empty(&plchan->pend_list)) { - struct pl08x_txd *txdi; - list_for_each_entry(txdi, &plchan->pend_list, node) { - struct pl08x_sg *dsg; - list_for_each_entry(dsg, &txd->dsg_list, node) - bytes += dsg->len; - } - } - - spin_unlock_irqrestore(&plchan->lock, flags); - return bytes; } @@ -391,7 +537,6 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, if (!ch->locked && !ch->serving) { ch->serving = virt_chan; - ch->signal = -1; spin_unlock_irqrestore(&ch->lock, flags); break; } @@ -404,25 +549,114 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, return NULL; } - pm_runtime_get_sync(&pl08x->adev->dev); return ch; } +/* Mark the physical channel as free. Note, this write is atomic. */ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x, struct pl08x_phy_chan *ch) { - unsigned long flags; - - spin_lock_irqsave(&ch->lock, flags); - - /* Stop the channel and clear its interrupts */ - pl08x_terminate_phy_chan(pl08x, ch); - - pm_runtime_put(&pl08x->adev->dev); - - /* Mark it as free */ ch->serving = NULL; - spin_unlock_irqrestore(&ch->lock, flags); +} + +/* + * Try to allocate a physical channel. When successful, assign it to + * this virtual channel, and initiate the next descriptor. The + * virtual channel lock must be held at this point. + */ +static void pl08x_phy_alloc_and_start(struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_phy_chan *ch; + + ch = pl08x_get_phy_channel(pl08x, plchan); + if (!ch) { + dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name); + plchan->state = PL08X_CHAN_WAITING; + return; + } + + dev_dbg(&pl08x->adev->dev, "allocated physical channel %d for xfer on %s\n", + ch->id, plchan->name); + + plchan->phychan = ch; + plchan->state = PL08X_CHAN_RUNNING; + pl08x_start_next_txd(plchan); +} + +static void pl08x_phy_reassign_start(struct pl08x_phy_chan *ch, + struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + + dev_dbg(&pl08x->adev->dev, "reassigned physical channel %d for xfer on %s\n", + ch->id, plchan->name); + + /* + * We do this without taking the lock; we're really only concerned + * about whether this pointer is NULL or not, and we're guaranteed + * that this will only be called when it _already_ is non-NULL. + */ + ch->serving = plchan; + plchan->phychan = ch; + plchan->state = PL08X_CHAN_RUNNING; + pl08x_start_next_txd(plchan); +} + +/* + * Free a physical DMA channel, potentially reallocating it to another + * virtual channel if we have any pending. + */ +static void pl08x_phy_free(struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_dma_chan *p, *next; + + retry: + next = NULL; + + /* Find a waiting virtual channel for the next transfer. */ + list_for_each_entry(p, &pl08x->memcpy.channels, vc.chan.device_node) + if (p->state == PL08X_CHAN_WAITING) { + next = p; + break; + } + + if (!next) { + list_for_each_entry(p, &pl08x->slave.channels, vc.chan.device_node) + if (p->state == PL08X_CHAN_WAITING) { + next = p; + break; + } + } + + /* Ensure that the physical channel is stopped */ + pl08x_terminate_phy_chan(pl08x, plchan->phychan); + + if (next) { + bool success; + + /* + * Eww. We know this isn't going to deadlock + * but lockdep probably doesn't. + */ + spin_lock(&next->vc.lock); + /* Re-check the state now that we have the lock */ + success = next->state == PL08X_CHAN_WAITING; + if (success) + pl08x_phy_reassign_start(plchan->phychan, next); + spin_unlock(&next->vc.lock); + + /* If the state changed, try to find another channel */ + if (!success) + goto retry; + } else { + /* No more jobs, so free up the physical channel */ + pl08x_put_phy_channel(pl08x, plchan->phychan); + } + + plchan->phychan = NULL; + plchan->state = PL08X_CHAN_IDLE; } /* @@ -585,8 +819,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, return 0; } - pl08x->pool_ctr++; - bd.txd = txd; bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0; cctl = txd->cctl; @@ -802,18 +1034,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, return num_llis; } -/* You should call this with the struct pl08x lock held */ static void pl08x_free_txd(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { struct pl08x_sg *dsg, *_dsg; - /* Free the LLI */ if (txd->llis_va) dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); - pl08x->pool_ctr--; - list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) { list_del(&dsg->node); kfree(dsg); @@ -822,18 +1050,60 @@ static void pl08x_free_txd(struct pl08x_driver_data *pl08x, kfree(txd); } +static void pl08x_unmap_buffers(struct pl08x_txd *txd) +{ + struct device *dev = txd->vd.tx.chan->device->dev; + struct pl08x_sg *dsg; + + if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (txd->vd.tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); + else { + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); + } + } + if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (txd->vd.tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); + else + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); + } +} + +static void pl08x_desc_free(struct virt_dma_desc *vd) +{ + struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); + struct pl08x_dma_chan *plchan = to_pl08x_chan(vd->tx.chan); + + if (!plchan->slave) + pl08x_unmap_buffers(txd); + + if (!txd->done) + pl08x_release_mux(plchan); + + pl08x_free_txd(plchan->host, txd); +} + static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x, struct pl08x_dma_chan *plchan) { - struct pl08x_txd *txdi = NULL; - struct pl08x_txd *next; + LIST_HEAD(head); + struct pl08x_txd *txd; - if (!list_empty(&plchan->pend_list)) { - list_for_each_entry_safe(txdi, - next, &plchan->pend_list, node) { - list_del(&txdi->node); - pl08x_free_txd(pl08x, txdi); - } + vchan_get_all_descriptors(&plchan->vc, &head); + + while (!list_empty(&head)) { + txd = list_first_entry(&head, struct pl08x_txd, vd.node); + list_del(&txd->vd.node); + pl08x_desc_free(&txd->vd); } } @@ -847,108 +1117,8 @@ static int pl08x_alloc_chan_resources(struct dma_chan *chan) static void pl08x_free_chan_resources(struct dma_chan *chan) { -} - -/* - * This should be called with the channel plchan->lock held - */ -static int prep_phy_channel(struct pl08x_dma_chan *plchan, - struct pl08x_txd *txd) -{ - struct pl08x_driver_data *pl08x = plchan->host; - struct pl08x_phy_chan *ch; - int ret; - - /* Check if we already have a channel */ - if (plchan->phychan) { - ch = plchan->phychan; - goto got_channel; - } - - ch = pl08x_get_phy_channel(pl08x, plchan); - if (!ch) { - /* No physical channel available, cope with it */ - dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name); - return -EBUSY; - } - - /* - * OK we have a physical channel: for memcpy() this is all we - * need, but for slaves the physical signals may be muxed! - * Can the platform allow us to use this channel? - */ - if (plchan->slave && pl08x->pd->get_signal) { - ret = pl08x->pd->get_signal(plchan); - if (ret < 0) { - dev_dbg(&pl08x->adev->dev, - "unable to use physical channel %d for transfer on %s due to platform restrictions\n", - ch->id, plchan->name); - /* Release physical channel & return */ - pl08x_put_phy_channel(pl08x, ch); - return -EBUSY; - } - ch->signal = ret; - } - - plchan->phychan = ch; - dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n", - ch->id, - ch->signal, - plchan->name); - -got_channel: - /* Assign the flow control signal to this channel */ - if (txd->direction == DMA_MEM_TO_DEV) - txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT; - else if (txd->direction == DMA_DEV_TO_MEM) - txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT; - - plchan->phychan_hold++; - - return 0; -} - -static void release_phy_channel(struct pl08x_dma_chan *plchan) -{ - struct pl08x_driver_data *pl08x = plchan->host; - - if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) { - pl08x->pd->put_signal(plchan); - plchan->phychan->signal = -1; - } - pl08x_put_phy_channel(pl08x, plchan->phychan); - plchan->phychan = NULL; -} - -static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) -{ - struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); - struct pl08x_txd *txd = to_pl08x_txd(tx); - unsigned long flags; - dma_cookie_t cookie; - - spin_lock_irqsave(&plchan->lock, flags); - cookie = dma_cookie_assign(tx); - - /* Put this onto the pending list */ - list_add_tail(&txd->node, &plchan->pend_list); - - /* - * If there was no physical channel available for this memcpy, - * stack the request up and indicate that the channel is waiting - * for a free physical channel. - */ - if (!plchan->slave && !plchan->phychan) { - /* Do this memcpy whenever there is a channel ready */ - plchan->state = PL08X_CHAN_WAITING; - plchan->waiting = txd; - } else { - plchan->phychan_hold--; - } - - spin_unlock_irqrestore(&plchan->lock, flags); - - return cookie; + /* Ensure all queued descriptors are freed */ + vchan_free_chan_resources(to_virt_chan(chan)); } static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( @@ -968,23 +1138,53 @@ static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, struct dma_tx_state *txstate) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct virt_dma_desc *vd; + unsigned long flags; enum dma_status ret; + size_t bytes = 0; ret = dma_cookie_status(chan, cookie, txstate); if (ret == DMA_SUCCESS) return ret; + /* + * There's no point calculating the residue if there's + * no txstate to store the value. + */ + if (!txstate) { + if (plchan->state == PL08X_CHAN_PAUSED) + ret = DMA_PAUSED; + return ret; + } + + spin_lock_irqsave(&plchan->vc.lock, flags); + ret = dma_cookie_status(chan, cookie, txstate); + if (ret != DMA_SUCCESS) { + vd = vchan_find_desc(&plchan->vc, cookie); + if (vd) { + /* On the issued list, so hasn't been processed yet */ + struct pl08x_txd *txd = to_pl08x_txd(&vd->tx); + struct pl08x_sg *dsg; + + list_for_each_entry(dsg, &txd->dsg_list, node) + bytes += dsg->len; + } else { + bytes = pl08x_getbytes_chan(plchan); + } + } + spin_unlock_irqrestore(&plchan->vc.lock, flags); + /* * This cookie not complete yet * Get number of bytes left in the active transactions and queue */ - dma_set_residue(txstate, pl08x_getbytes_chan(plchan)); + dma_set_residue(txstate, bytes); - if (plchan->state == PL08X_CHAN_PAUSED) - return DMA_PAUSED; + if (plchan->state == PL08X_CHAN_PAUSED && ret == DMA_IN_PROGRESS) + ret = DMA_PAUSED; /* Whether waiting or running, we're in progress */ - return DMA_IN_PROGRESS; + return ret; } /* PrimeCell DMA extension */ @@ -1080,38 +1280,14 @@ static u32 pl08x_burst(u32 maxburst) return burst_sizes[i].reg; } -static int dma_set_runtime_config(struct dma_chan *chan, - struct dma_slave_config *config) +static u32 pl08x_get_cctl(struct pl08x_dma_chan *plchan, + enum dma_slave_buswidth addr_width, u32 maxburst) { - struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - struct pl08x_driver_data *pl08x = plchan->host; - enum dma_slave_buswidth addr_width; - u32 width, burst, maxburst; - u32 cctl = 0; - - if (!plchan->slave) - return -EINVAL; - - /* Transfer direction */ - plchan->runtime_direction = config->direction; - if (config->direction == DMA_MEM_TO_DEV) { - addr_width = config->dst_addr_width; - maxburst = config->dst_maxburst; - } else if (config->direction == DMA_DEV_TO_MEM) { - addr_width = config->src_addr_width; - maxburst = config->src_maxburst; - } else { - dev_err(&pl08x->adev->dev, - "bad runtime_config: alien transfer direction\n"); - return -EINVAL; - } + u32 width, burst, cctl = 0; width = pl08x_width(addr_width); - if (width == ~0) { - dev_err(&pl08x->adev->dev, - "bad runtime_config: alien address width\n"); - return -EINVAL; - } + if (width == ~0) + return ~0; cctl |= width << PL080_CONTROL_SWIDTH_SHIFT; cctl |= width << PL080_CONTROL_DWIDTH_SHIFT; @@ -1128,28 +1304,23 @@ static int dma_set_runtime_config(struct dma_chan *chan, cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT; cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT; - plchan->device_fc = config->device_fc; + return pl08x_cctl(cctl); +} - if (plchan->runtime_direction == DMA_DEV_TO_MEM) { - plchan->src_addr = config->src_addr; - plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR | - pl08x_select_bus(plchan->cd->periph_buses, - pl08x->mem_buses); - } else { - plchan->dst_addr = config->dst_addr; - plchan->dst_cctl = pl08x_cctl(cctl) | PL080_CONTROL_SRC_INCR | - pl08x_select_bus(pl08x->mem_buses, - plchan->cd->periph_buses); - } +static int dma_set_runtime_config(struct dma_chan *chan, + struct dma_slave_config *config) +{ + struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - dev_dbg(&pl08x->adev->dev, - "configured channel %s (%s) for %s, data width %d, " - "maxburst %d words, LE, CCTL=0x%08x\n", - dma_chan_name(chan), plchan->name, - (config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX", - addr_width, - maxburst, - cctl); + if (!plchan->slave) + return -EINVAL; + + /* Reject definitely invalid configurations */ + if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || + config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) + return -EINVAL; + + plchan->cfg = *config; return 0; } @@ -1163,95 +1334,19 @@ static void pl08x_issue_pending(struct dma_chan *chan) struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); unsigned long flags; - spin_lock_irqsave(&plchan->lock, flags); - /* Something is already active, or we're waiting for a channel... */ - if (plchan->at || plchan->state == PL08X_CHAN_WAITING) { - spin_unlock_irqrestore(&plchan->lock, flags); - return; + spin_lock_irqsave(&plchan->vc.lock, flags); + if (vchan_issue_pending(&plchan->vc)) { + if (!plchan->phychan && plchan->state != PL08X_CHAN_WAITING) + pl08x_phy_alloc_and_start(plchan); } - - /* Take the first element in the queue and execute it */ - if (!list_empty(&plchan->pend_list)) { - struct pl08x_txd *next; - - next = list_first_entry(&plchan->pend_list, - struct pl08x_txd, - node); - list_del(&next->node); - plchan->state = PL08X_CHAN_RUNNING; - - pl08x_start_txd(plchan, next); - } - - spin_unlock_irqrestore(&plchan->lock, flags); + spin_unlock_irqrestore(&plchan->vc.lock, flags); } -static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, - struct pl08x_txd *txd) -{ - struct pl08x_driver_data *pl08x = plchan->host; - unsigned long flags; - int num_llis, ret; - - num_llis = pl08x_fill_llis_for_desc(pl08x, txd); - if (!num_llis) { - spin_lock_irqsave(&plchan->lock, flags); - pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, flags); - return -EINVAL; - } - - spin_lock_irqsave(&plchan->lock, flags); - - /* - * See if we already have a physical channel allocated, - * else this is the time to try to get one. - */ - ret = prep_phy_channel(plchan, txd); - if (ret) { - /* - * No physical channel was available. - * - * memcpy transfers can be sorted out at submission time. - * - * Slave transfers may have been denied due to platform - * channel muxing restrictions. Since there is no guarantee - * that this will ever be resolved, and the signal must be - * acquired AFTER acquiring the physical channel, we will let - * them be NACK:ed with -EBUSY here. The drivers can retry - * the prep() call if they are eager on doing this using DMA. - */ - if (plchan->slave) { - pl08x_free_txd_list(pl08x, plchan); - pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, flags); - return -EBUSY; - } - } else - /* - * Else we're all set, paused and ready to roll, status - * will switch to PL08X_CHAN_RUNNING when we call - * issue_pending(). If there is something running on the - * channel already we don't change its state. - */ - if (plchan->state == PL08X_CHAN_IDLE) - plchan->state = PL08X_CHAN_PAUSED; - - spin_unlock_irqrestore(&plchan->lock, flags); - - return 0; -} - -static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, - unsigned long flags) +static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) { struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); if (txd) { - dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); - txd->tx.flags = flags; - txd->tx.tx_submit = pl08x_tx_submit; - INIT_LIST_HEAD(&txd->node); INIT_LIST_HEAD(&txd->dsg_list); /* Always enable error and terminal interrupts */ @@ -1274,7 +1369,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( struct pl08x_sg *dsg; int ret; - txd = pl08x_get_txd(plchan, flags); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no memory for descriptor\n", __func__); @@ -1290,14 +1385,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( } list_add_tail(&dsg->node, &txd->dsg_list); - txd->direction = DMA_NONE; dsg->src_addr = src; dsg->dst_addr = dest; dsg->len = len; /* Set platform data for m2m */ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; - txd->cctl = pl08x->pd->memcpy_channel.cctl & + txd->cctl = pl08x->pd->memcpy_channel.cctl_memcpy & ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); /* Both to be incremented or the code will break */ @@ -1307,11 +1401,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->cctl |= pl08x_select_bus(pl08x->mem_buses, pl08x->mem_buses); - ret = pl08x_prep_channel_resources(plchan, txd); - if (ret) + ret = pl08x_fill_llis_for_desc(plchan->host, txd); + if (!ret) { + pl08x_free_txd(pl08x, txd); return NULL; + } - return &txd->tx; + return vchan_tx_prep(&plchan->vc, &txd->vd, flags); } static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( @@ -1324,36 +1420,40 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_txd *txd; struct pl08x_sg *dsg; struct scatterlist *sg; + enum dma_slave_buswidth addr_width; dma_addr_t slave_addr; int ret, tmp; + u8 src_buses, dst_buses; + u32 maxburst, cctl; dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", __func__, sg_dma_len(sgl), plchan->name); - txd = pl08x_get_txd(plchan, flags); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no txd\n", __func__); return NULL; } - if (direction != plchan->runtime_direction) - dev_err(&pl08x->adev->dev, "%s DMA setup does not match " - "the direction configured for the PrimeCell\n", - __func__); - /* * Set up addresses, the PrimeCell configured address * will take precedence since this may configure the * channel target address dynamically at runtime. */ - txd->direction = direction; - if (direction == DMA_MEM_TO_DEV) { - txd->cctl = plchan->dst_cctl; - slave_addr = plchan->dst_addr; + cctl = PL080_CONTROL_SRC_INCR; + slave_addr = plchan->cfg.dst_addr; + addr_width = plchan->cfg.dst_addr_width; + maxburst = plchan->cfg.dst_maxburst; + src_buses = pl08x->mem_buses; + dst_buses = plchan->cd->periph_buses; } else if (direction == DMA_DEV_TO_MEM) { - txd->cctl = plchan->src_cctl; - slave_addr = plchan->src_addr; + cctl = PL080_CONTROL_DST_INCR; + slave_addr = plchan->cfg.src_addr; + addr_width = plchan->cfg.src_addr_width; + maxburst = plchan->cfg.src_maxburst; + src_buses = plchan->cd->periph_buses; + dst_buses = pl08x->mem_buses; } else { pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, @@ -1361,7 +1461,17 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } - if (plchan->device_fc) + cctl |= pl08x_get_cctl(plchan, addr_width, maxburst); + if (cctl == ~0) { + pl08x_free_txd(pl08x, txd); + dev_err(&pl08x->adev->dev, + "DMA slave configuration botched?\n"); + return NULL; + } + + txd->cctl = cctl | pl08x_select_bus(src_buses, dst_buses); + + if (plchan->cfg.device_fc) tmp = (direction == DMA_MEM_TO_DEV) ? PL080_FLOW_MEM2PER_PER : PL080_FLOW_PER2MEM_PER; else @@ -1370,9 +1480,28 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + ret = pl08x_request_mux(plchan); + if (ret < 0) { + pl08x_free_txd(pl08x, txd); + dev_dbg(&pl08x->adev->dev, + "unable to mux for transfer on %s due to platform restrictions\n", + plchan->name); + return NULL; + } + + dev_dbg(&pl08x->adev->dev, "allocated DMA request signal %d for xfer on %s\n", + plchan->signal, plchan->name); + + /* Assign the flow control signal to this channel */ + if (direction == DMA_MEM_TO_DEV) + txd->ccfg |= plchan->signal << PL080_CONFIG_DST_SEL_SHIFT; + else + txd->ccfg |= plchan->signal << PL080_CONFIG_SRC_SEL_SHIFT; + for_each_sg(sgl, sg, sg_len, tmp) { dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); if (!dsg) { + pl08x_release_mux(plchan); pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n", __func__); @@ -1390,11 +1519,14 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( } } - ret = pl08x_prep_channel_resources(plchan, txd); - if (ret) + ret = pl08x_fill_llis_for_desc(plchan->host, txd); + if (!ret) { + pl08x_release_mux(plchan); + pl08x_free_txd(pl08x, txd); return NULL; + } - return &txd->tx; + return vchan_tx_prep(&plchan->vc, &txd->vd, flags); } static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, @@ -1415,9 +1547,9 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * Anything succeeds on channels with no physical allocation and * no queued transfers. */ - spin_lock_irqsave(&plchan->lock, flags); + spin_lock_irqsave(&plchan->vc.lock, flags); if (!plchan->phychan && !plchan->at) { - spin_unlock_irqrestore(&plchan->lock, flags); + spin_unlock_irqrestore(&plchan->vc.lock, flags); return 0; } @@ -1426,18 +1558,15 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, plchan->state = PL08X_CHAN_IDLE; if (plchan->phychan) { - pl08x_terminate_phy_chan(pl08x, plchan->phychan); - /* * Mark physical channel as free and free any slave * signal */ - release_phy_channel(plchan); - plchan->phychan_hold = 0; + pl08x_phy_free(plchan); } /* Dequeue jobs and free LLIs */ if (plchan->at) { - pl08x_free_txd(pl08x, plchan->at); + pl08x_desc_free(&plchan->at->vd); plchan->at = NULL; } /* Dequeue jobs not yet fired as well */ @@ -1457,7 +1586,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, break; } - spin_unlock_irqrestore(&plchan->lock, flags); + spin_unlock_irqrestore(&plchan->vc.lock, flags); return ret; } @@ -1494,123 +1623,6 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG); } -static void pl08x_unmap_buffers(struct pl08x_txd *txd) -{ - struct device *dev = txd->tx.chan->device->dev; - struct pl08x_sg *dsg; - - if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { - if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_single(dev, dsg->src_addr, dsg->len, - DMA_TO_DEVICE); - else { - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_page(dev, dsg->src_addr, dsg->len, - DMA_TO_DEVICE); - } - } - if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { - if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_single(dev, dsg->dst_addr, dsg->len, - DMA_FROM_DEVICE); - else - list_for_each_entry(dsg, &txd->dsg_list, node) - dma_unmap_page(dev, dsg->dst_addr, dsg->len, - DMA_FROM_DEVICE); - } -} - -static void pl08x_tasklet(unsigned long data) -{ - struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; - struct pl08x_driver_data *pl08x = plchan->host; - struct pl08x_txd *txd; - unsigned long flags; - - spin_lock_irqsave(&plchan->lock, flags); - - txd = plchan->at; - plchan->at = NULL; - - if (txd) { - /* Update last completed */ - dma_cookie_complete(&txd->tx); - } - - /* If a new descriptor is queued, set it up plchan->at is NULL here */ - if (!list_empty(&plchan->pend_list)) { - struct pl08x_txd *next; - - next = list_first_entry(&plchan->pend_list, - struct pl08x_txd, - node); - list_del(&next->node); - - pl08x_start_txd(plchan, next); - } else if (plchan->phychan_hold) { - /* - * This channel is still in use - we have a new txd being - * prepared and will soon be queued. Don't give up the - * physical channel. - */ - } else { - struct pl08x_dma_chan *waiting = NULL; - - /* - * No more jobs, so free up the physical channel - * Free any allocated signal on slave transfers too - */ - release_phy_channel(plchan); - plchan->state = PL08X_CHAN_IDLE; - - /* - * And NOW before anyone else can grab that free:d up - * physical channel, see if there is some memcpy pending - * that seriously needs to start because of being stacked - * up while we were choking the physical channels with data. - */ - list_for_each_entry(waiting, &pl08x->memcpy.channels, - chan.device_node) { - if (waiting->state == PL08X_CHAN_WAITING && - waiting->waiting != NULL) { - int ret; - - /* This should REALLY not fail now */ - ret = prep_phy_channel(waiting, - waiting->waiting); - BUG_ON(ret); - waiting->phychan_hold--; - waiting->state = PL08X_CHAN_RUNNING; - waiting->waiting = NULL; - pl08x_issue_pending(&waiting->chan); - break; - } - } - } - - spin_unlock_irqrestore(&plchan->lock, flags); - - if (txd) { - dma_async_tx_callback callback = txd->tx.callback; - void *callback_param = txd->tx.callback_param; - - /* Don't try to unmap buffers on slave channels */ - if (!plchan->slave) - pl08x_unmap_buffers(txd); - - /* Free the descriptor */ - spin_lock_irqsave(&plchan->lock, flags); - pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, flags); - - /* Callback to signal completion */ - if (callback) - callback(callback_param); - } -} - static irqreturn_t pl08x_irq(int irq, void *dev) { struct pl08x_driver_data *pl08x = dev; @@ -1635,6 +1647,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev) /* Locate physical channel */ struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i]; struct pl08x_dma_chan *plchan = phychan->serving; + struct pl08x_txd *tx; if (!plchan) { dev_err(&pl08x->adev->dev, @@ -1643,8 +1656,29 @@ static irqreturn_t pl08x_irq(int irq, void *dev) continue; } - /* Schedule tasklet on this channel */ - tasklet_schedule(&plchan->tasklet); + spin_lock(&plchan->vc.lock); + tx = plchan->at; + if (tx) { + plchan->at = NULL; + /* + * This descriptor is done, release its mux + * reservation. + */ + pl08x_release_mux(plchan); + tx->done = true; + vchan_cookie_complete(&tx->vd); + + /* + * And start the next descriptor (if any), + * otherwise free this channel. + */ + if (vchan_next_desc(&plchan->vc)) + pl08x_start_next_txd(plchan); + else + pl08x_phy_free(plchan); + } + spin_unlock(&plchan->vc.lock); + mask |= (1 << i); } } @@ -1654,16 +1688,10 @@ static irqreturn_t pl08x_irq(int irq, void *dev) static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan) { - u32 cctl = pl08x_cctl(chan->cd->cctl); - chan->slave = true; chan->name = chan->cd->bus_id; - chan->src_addr = chan->cd->addr; - chan->dst_addr = chan->cd->addr; - chan->src_cctl = cctl | PL080_CONTROL_DST_INCR | - pl08x_select_bus(chan->cd->periph_buses, chan->host->mem_buses); - chan->dst_cctl = cctl | PL080_CONTROL_SRC_INCR | - pl08x_select_bus(chan->host->mem_buses, chan->cd->periph_buses); + chan->cfg.src_addr = chan->cd->addr; + chan->cfg.dst_addr = chan->cd->addr; } /* @@ -1693,6 +1721,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->host = pl08x; chan->state = PL08X_CHAN_IDLE; + chan->signal = -1; if (slave) { chan->cd = &pl08x->pd->slave_channels[i]; @@ -1705,26 +1734,12 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, return -ENOMEM; } } - if (chan->cd->circular_buffer) { - dev_err(&pl08x->adev->dev, - "channel %s: circular buffers not supported\n", - chan->name); - kfree(chan); - continue; - } dev_dbg(&pl08x->adev->dev, "initialize virtual channel \"%s\"\n", chan->name); - chan->chan.device = dmadev; - dma_cookie_init(&chan->chan); - - spin_lock_init(&chan->lock); - INIT_LIST_HEAD(&chan->pend_list); - tasklet_init(&chan->tasklet, pl08x_tasklet, - (unsigned long) chan); - - list_add_tail(&chan->chan.device_node, &dmadev->channels); + chan->vc.desc_free = pl08x_desc_free; + vchan_init(&chan->vc, dmadev); } dev_info(&pl08x->adev->dev, "initialized %d virtual %s channels\n", i, slave ? "slave" : "memcpy"); @@ -1737,8 +1752,8 @@ static void pl08x_free_virtual_channels(struct dma_device *dmadev) struct pl08x_dma_chan *next; list_for_each_entry_safe(chan, - next, &dmadev->channels, chan.device_node) { - list_del(&chan->chan.device_node); + next, &dmadev->channels, vc.chan.device_node) { + list_del(&chan->vc.chan.device_node); kfree(chan); } } @@ -1791,7 +1806,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "\nPL08x virtual memcpy channels:\n"); seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); - list_for_each_entry(chan, &pl08x->memcpy.channels, chan.device_node) { + list_for_each_entry(chan, &pl08x->memcpy.channels, vc.chan.device_node) { seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } @@ -1799,7 +1814,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "\nPL08x virtual slave channels:\n"); seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); - list_for_each_entry(chan, &pl08x->slave.channels, chan.device_node) { + list_for_each_entry(chan, &pl08x->slave.channels, vc.chan.device_node) { seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } @@ -1851,9 +1866,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) goto out_no_pl08x; } - pm_runtime_set_active(&adev->dev); - pm_runtime_enable(&adev->dev); - /* Initialize memcpy engine */ dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask); pl08x->memcpy.dev = &adev->dev; @@ -1903,8 +1915,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) goto out_no_lli_pool; } - spin_lock_init(&pl08x->lock); - pl08x->base = ioremap(adev->res.start, resource_size(&adev->res)); if (!pl08x->base) { ret = -ENOMEM; @@ -1942,7 +1952,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) ch->id = i; ch->base = pl08x->base + PL080_Cx_BASE(i); spin_lock_init(&ch->lock); - ch->signal = -1; /* * Nomadik variants can have channels that are locked @@ -2007,7 +2016,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) amba_part(adev), amba_rev(adev), (unsigned long long)adev->res.start, adev->irq[0]); - pm_runtime_put(&adev->dev); return 0; out_no_slave_reg: @@ -2026,9 +2034,6 @@ out_no_ioremap: dma_pool_destroy(pl08x->pool); out_no_lli_pool: out_no_platdata: - pm_runtime_put(&adev->dev); - pm_runtime_disable(&adev->dev); - kfree(pl08x); out_no_pl08x: amba_release_regions(adev); diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c index 5f1d2e670837..f5a73606217e 100644 --- a/drivers/dma/sa11x0-dma.c +++ b/drivers/dma/sa11x0-dma.c @@ -78,6 +78,8 @@ struct sa11x0_dma_desc { u32 ddar; size_t size; + unsigned period; + bool cyclic; unsigned sglen; struct sa11x0_dma_sg sg[0]; @@ -178,19 +180,24 @@ static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p, return; if (p->sg_load == txd->sglen) { - struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c); + if (!txd->cyclic) { + struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c); - /* - * We have reached the end of the current descriptor. - * Peek at the next descriptor, and if compatible with - * the current, start processing it. - */ - if (txn && txn->ddar == txd->ddar) { - txd = txn; - sa11x0_dma_start_desc(p, txn); + /* + * We have reached the end of the current descriptor. + * Peek at the next descriptor, and if compatible with + * the current, start processing it. + */ + if (txn && txn->ddar == txd->ddar) { + txd = txn; + sa11x0_dma_start_desc(p, txn); + } else { + p->txd_load = NULL; + return; + } } else { - p->txd_load = NULL; - return; + /* Cyclic: reset back to beginning */ + p->sg_load = 0; } } @@ -224,13 +231,21 @@ static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd = p->txd_done; if (++p->sg_done == txd->sglen) { - vchan_cookie_complete(&txd->vd); + if (!txd->cyclic) { + vchan_cookie_complete(&txd->vd); - p->sg_done = 0; - p->txd_done = p->txd_load; + p->sg_done = 0; + p->txd_done = p->txd_load; - if (!p->txd_done) - tasklet_schedule(&p->dev->task); + if (!p->txd_done) + tasklet_schedule(&p->dev->task); + } else { + if ((p->sg_done % txd->period) == 0) + vchan_cyclic_callback(&txd->vd); + + /* Cyclic: reset back to beginning */ + p->sg_done = 0; + } } sa11x0_dma_start_sg(p, c); @@ -416,27 +431,47 @@ static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan, struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); struct sa11x0_dma_phy *p; - struct sa11x0_dma_desc *txd; + struct virt_dma_desc *vd; unsigned long flags; enum dma_status ret; - size_t bytes = 0; ret = dma_cookie_status(&c->vc.chan, cookie, state); if (ret == DMA_SUCCESS) return ret; + if (!state) + return c->status; + spin_lock_irqsave(&c->vc.lock, flags); p = c->phy; - ret = c->status; - if (p) { - dma_addr_t addr = sa11x0_dma_pos(p); - dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr); + /* + * If the cookie is on our issue queue, then the residue is + * its total size. + */ + vd = vchan_find_desc(&c->vc, cookie); + if (vd) { + state->residue = container_of(vd, struct sa11x0_dma_desc, vd)->size; + } else if (!p) { + state->residue = 0; + } else { + struct sa11x0_dma_desc *txd; + size_t bytes = 0; - txd = p->txd_done; + if (p->txd_done && p->txd_done->vd.tx.cookie == cookie) + txd = p->txd_done; + else if (p->txd_load && p->txd_load->vd.tx.cookie == cookie) + txd = p->txd_load; + else + txd = NULL; + + ret = c->status; if (txd) { + dma_addr_t addr = sa11x0_dma_pos(p); unsigned i; + dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr); + for (i = 0; i < txd->sglen; i++) { dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n", i, txd->sg[i].addr, txd->sg[i].len); @@ -459,18 +494,11 @@ static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan, bytes += txd->sg[i].len; } } - if (txd != p->txd_load && p->txd_load) - bytes += p->txd_load->size; - } - list_for_each_entry(txd, &c->vc.desc_issued, vd.node) { - bytes += txd->size; + state->residue = bytes; } spin_unlock_irqrestore(&c->vc.lock, flags); - if (state) - state->residue = bytes; - - dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", bytes); + dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", state->residue); return ret; } @@ -584,6 +612,65 @@ static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( return vchan_tx_prep(&c->vc, &txd->vd, flags); } +static struct dma_async_tx_descriptor *sa11x0_dma_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period, + enum dma_transfer_direction dir, void *context) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_desc *txd; + unsigned i, j, k, sglen, sgperiod; + + /* SA11x0 channels can only operate in their native direction */ + if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) { + dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n", + &c->vc, c->ddar, dir); + return NULL; + } + + sgperiod = DIV_ROUND_UP(period, DMA_MAX_SIZE & ~DMA_ALIGN); + sglen = size * sgperiod / period; + + /* Do not allow zero-sized txds */ + if (sglen == 0) + return NULL; + + txd = kzalloc(sizeof(*txd) + sglen * sizeof(txd->sg[0]), GFP_ATOMIC); + if (!txd) { + dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", &c->vc); + return NULL; + } + + for (i = k = 0; i < size / period; i++) { + size_t tlen, len = period; + + for (j = 0; j < sgperiod; j++, k++) { + tlen = len; + + if (tlen > DMA_MAX_SIZE) { + unsigned mult = DIV_ROUND_UP(tlen, DMA_MAX_SIZE & ~DMA_ALIGN); + tlen = (tlen / mult) & ~DMA_ALIGN; + } + + txd->sg[k].addr = addr; + txd->sg[k].len = tlen; + addr += tlen; + len -= tlen; + } + + WARN_ON(len != 0); + } + + WARN_ON(k != sglen); + + txd->ddar = c->ddar; + txd->size = size; + txd->sglen = sglen; + txd->cyclic = 1; + txd->period = sgperiod; + + return vchan_tx_prep(&c->vc, &txd->vd, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); +} + static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_config *cfg) { u32 ddar = c->ddar & ((0xf << 4) | DDAR_RW); @@ -854,7 +941,9 @@ static int __devinit sa11x0_dma_probe(struct platform_device *pdev) } dma_cap_set(DMA_SLAVE, d->slave.cap_mask); + dma_cap_set(DMA_CYCLIC, d->slave.cap_mask); d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg; + d->slave.device_prep_dma_cyclic = sa11x0_dma_prep_dma_cyclic; ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev); if (ret) { dev_warn(d->slave.dev, "failed to register slave async device: %d\n", diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 02549017212a..2a5f64a11b77 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -21,8 +21,9 @@ #include #include -struct pl08x_lli; struct pl08x_driver_data; +struct pl08x_phy_chan; +struct pl08x_txd; /* Bitmasks for selecting AHB ports for DMA transfers */ enum { @@ -46,169 +47,28 @@ enum { * devices with static assignments * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel - * @cctl_opt: default options for the channel control register + * @cctl_memcpy: options for the channel control register for memcpy + * *** not used for slave channels *** * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring * this. - * @circular_buffer: whether the buffer passed in is circular and - * shall simply be looped round round (like a record baby round - * round round round) * @single: the device connected to this channel will request single DMA * transfers, not bursts. (Bursts are default.) * @periph_buses: the device connected to this channel is accessible via * these buses (use PL08X_AHB1 | PL08X_AHB2). */ struct pl08x_channel_data { - char *bus_id; + const char *bus_id; int min_signal; int max_signal; u32 muxval; - u32 cctl; + u32 cctl_memcpy; dma_addr_t addr; - bool circular_buffer; bool single; u8 periph_buses; }; -/** - * Struct pl08x_bus_data - information of source or destination - * busses for a transfer - * @addr: current address - * @maxwidth: the maximum width of a transfer on this bus - * @buswidth: the width of this bus in bytes: 1, 2 or 4 - */ -struct pl08x_bus_data { - dma_addr_t addr; - u8 maxwidth; - u8 buswidth; -}; - -/** - * struct pl08x_phy_chan - holder for the physical channels - * @id: physical index to this channel - * @lock: a lock to use when altering an instance of this struct - * @signal: the physical signal (aka channel) serving this physical channel - * right now - * @serving: the virtual channel currently being served by this physical - * channel - * @locked: channel unavailable for the system, e.g. dedicated to secure - * world - */ -struct pl08x_phy_chan { - unsigned int id; - void __iomem *base; - spinlock_t lock; - int signal; - struct pl08x_dma_chan *serving; - bool locked; -}; - -/** - * struct pl08x_sg - structure containing data per sg - * @src_addr: src address of sg - * @dst_addr: dst address of sg - * @len: transfer len in bytes - * @node: node for txd's dsg_list - */ -struct pl08x_sg { - dma_addr_t src_addr; - dma_addr_t dst_addr; - size_t len; - struct list_head node; -}; - -/** - * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor - * @tx: async tx descriptor - * @node: node for txd list for channels - * @dsg_list: list of children sg's - * @direction: direction of transfer - * @llis_bus: DMA memory address (physical) start for the LLIs - * @llis_va: virtual memory address start for the LLIs - * @cctl: control reg values for current txd - * @ccfg: config reg values for current txd - */ -struct pl08x_txd { - struct dma_async_tx_descriptor tx; - struct list_head node; - struct list_head dsg_list; - enum dma_transfer_direction direction; - dma_addr_t llis_bus; - struct pl08x_lli *llis_va; - /* Default cctl value for LLIs */ - u32 cctl; - /* - * Settings to be put into the physical channel when we - * trigger this txd. Other registers are in llis_va[0]. - */ - u32 ccfg; -}; - -/** - * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel - * states - * @PL08X_CHAN_IDLE: the channel is idle - * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport - * channel and is running a transfer on it - * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport - * channel, but the transfer is currently paused - * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport - * channel to become available (only pertains to memcpy channels) - */ -enum pl08x_dma_chan_state { - PL08X_CHAN_IDLE, - PL08X_CHAN_RUNNING, - PL08X_CHAN_PAUSED, - PL08X_CHAN_WAITING, -}; - -/** - * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel - * @chan: wrappped abstract channel - * @phychan: the physical channel utilized by this channel, if there is one - * @phychan_hold: if non-zero, hold on to the physical channel even if we - * have no pending entries - * @tasklet: tasklet scheduled by the IRQ to handle actual work etc - * @name: name of channel - * @cd: channel platform data - * @runtime_addr: address for RX/TX according to the runtime config - * @runtime_direction: current direction of this channel according to - * runtime config - * @pend_list: queued transactions pending on this channel - * @at: active transaction on this channel - * @lock: a lock for this channel data - * @host: a pointer to the host (internal use) - * @state: whether the channel is idle, paused, running etc - * @slave: whether this channel is a device (slave) or for memcpy - * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave - * channels. Fill with 'true' if peripheral should be flow controller. Direction - * will be selected at Runtime. - * @waiting: a TX descriptor on this channel which is waiting for a physical - * channel to become available - */ -struct pl08x_dma_chan { - struct dma_chan chan; - struct pl08x_phy_chan *phychan; - int phychan_hold; - struct tasklet_struct tasklet; - char *name; - const struct pl08x_channel_data *cd; - dma_addr_t src_addr; - dma_addr_t dst_addr; - u32 src_cctl; - u32 dst_cctl; - enum dma_transfer_direction runtime_direction; - struct list_head pend_list; - struct pl08x_txd *at; - spinlock_t lock; - struct pl08x_driver_data *host; - enum pl08x_dma_chan_state state; - bool slave; - bool device_fc; - struct pl08x_txd *waiting; -}; - /** * struct pl08x_platform_data - the platform configuration for the PL08x * PrimeCells. @@ -229,8 +89,8 @@ struct pl08x_platform_data { const struct pl08x_channel_data *slave_channels; unsigned int num_slave_channels; struct pl08x_channel_data memcpy_channel; - int (*get_signal)(struct pl08x_dma_chan *); - void (*put_signal)(struct pl08x_dma_chan *); + int (*get_signal)(const struct pl08x_channel_data *); + void (*put_signal)(const struct pl08x_channel_data *, int); u8 lli_buses; u8 mem_buses; };