Merge branch 'master'

Conflicts:

	drivers/scsi/libata-scsi.c
	include/linux/libata.h
This commit is contained in:
Jeff Garzik 2006-04-11 12:51:40 -04:00
commit 10a5fd5e6b
500 changed files with 7856 additions and 7485 deletions

View File

@ -3382,7 +3382,7 @@ S: Germany
N: Geert Uytterhoeven
E: geert@linux-m68k.org
W: http://home.tvd.be/cr26864/
W: http://users.telenet.be/geertu/
P: 1024/862678A6 C51D 361C 0BD1 4C90 B275 C553 6EEA 11BA 8626 78A6
D: m68k/Amiga and PPC/CHRP Longtrail coordinator
D: Frame buffer device and XF68_FBDev maintainer
@ -3392,8 +3392,8 @@ D: Amiga Buddha and Catweasel chipset IDE
D: Atari Falcon chipset IDE
D: Amiga Gayle chipset IDE
D: mipsel NEC DDB Vrc-5074
S: Emiel Vlieberghlaan 2A/21
S: B-3010 Kessel-Lo
S: Haterbeekstraat 55B
S: B-3200 Aarschot
S: Belgium
N: Chris Vance

View File

@ -194,7 +194,7 @@ document for how to handle this case.
Finally, if your device can only drive the low 24-bits of
address during PCI bus mastering you might do something like:
if (pci_set_dma_mask(pdev, 0x00ffffff)) {
if (pci_set_dma_mask(pdev, DMA_24BIT_MASK)) {
printk(KERN_WARNING
"mydev: 24-bit DMA addressing not available.\n");
goto ignore_this_device;
@ -212,7 +212,7 @@ functions (for example a sound card provides playback and record
functions) and the various different functions have _different_
DMA addressing limitations, you may wish to probe each mask and
only provide the functionality which the machine can handle. It
is important that the last call to pci_set_dma_mask() be for the
is important that the last call to pci_set_dma_mask() be for the
most specific mask.
Here is pseudo-code showing how this might be done:

View File

@ -705,7 +705,7 @@ and other resources, etc.
<sect1><title>ata_scsi_error()</title>
<para>
ata_scsi_error() is the current hostt->eh_strategy_handler()
ata_scsi_error() is the current transportt->eh_strategy_handler()
for libata. As discussed above, this will be entered in two
cases - timeout and ATAPI error completion. This function
calls low level libata driver's eng_timeout() callback, the

View File

@ -71,14 +71,6 @@ Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
---------------------------
What: remove EXPORT_SYMBOL(panic_timeout)
When: April 2006
Files: kernel/panic.c
Why: No modular usage in the kernel.
Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: remove EXPORT_SYMBOL(insert_resource)
When: April 2006
Files: kernel/resource.c

View File

@ -694,7 +694,7 @@ struct file_operations
----------------------
This describes how the VFS can manipulate an open file. As of kernel
2.6.13, the following members are defined:
2.6.17, the following members are defined:
struct file_operations {
loff_t (*llseek) (struct file *, loff_t, int);
@ -723,6 +723,10 @@ struct file_operations {
int (*check_flags)(int);
int (*dir_notify)(struct file *filp, unsigned long arg);
int (*flock) (struct file *, int, struct file_lock *);
ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, size_t, unsigned
int);
ssize_t (*splice_read)(struct file *, struct pipe_inode_info *, size_t, unsigned
int);
};
Again, all methods are called without any locks being held, unless
@ -790,6 +794,12 @@ otherwise noted.
flock: called by the flock(2) system call
splice_write: called by the VFS to splice data from a pipe to a file. This
method is used by the splice(2) system call
splice_read: called by the VFS to splice data from file to a pipe. This
method is used by the splice(2) system call
Note that the file operations are implemented by the specific
filesystem in which the inode resides. When opening a device node
(character or block special) most filesystems will call special

View File

@ -0,0 +1,286 @@
GigaSet 307x Device Driver
==========================
1. Requirements
------------
1.1. Hardware
--------
This release supports the connection of the Gigaset 307x/417x family of
ISDN DECT bases via Gigaset M101 Data, Gigaset M105 Data or direct USB
connection. The following devices are reported to be compatible:
307x/417x:
Gigaset SX255isdn
Gigaset SX353isdn
Sinus 45 [AB] isdn (Deutsche Telekom)
Sinus 721X/XA
Vox Chicago 390 ISDN (KPN Telecom)
M101:
Sinus 45 Data 1 (Telekom)
M105:
Gigaset USB Adapter DECT
Sinus 45 Data 2 (Telekom)
Sinus 721 data
Chicago 390 USB (KPN)
See also http://www.erbze.info/sinus_gigaset.htm and
http://gigaset307x.sourceforge.net/
We had also reports from users of Gigaset M105 who could use the drivers
with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.4.)
If you have another device that works with our driver, please let us know.
For example, Gigaset SX205isdn/Sinus 721 X SE and Gigaset SX303isdn bases
are just versions without answering machine of models known to work, so
they should work just as well; but so far we are lacking positive reports
on these.
Chances of getting an USB device to work are good if the output of
lsusb
at the command line contains one of the following:
ID 0681:0001
ID 0681:0002
ID 0681:0009
ID 0681:0021
ID 0681:0022
1.2. Software
--------
The driver works with ISDN4linux and so can be used with any software
which is able to use ISDN4linux for ISDN connections (voice or data).
CAPI4Linux support is planned but not yet available.
There are some user space tools available at
http://sourceforge.net/projects/gigaset307x/
which provide access to additional device specific functions like SMS,
phonebook or call journal.
2. How to use the driver
---------------------
2.1. Modules
-------
To get the device working, you have to load the proper kernel module. You
can do this using
modprobe modulename
where modulename is usb_gigaset (M105) or bas_gigaset (direct USB
connection to the base).
2.2. Device nodes for user space programs
------------------------------------
The device can be accessed from user space (eg. by the user space tools
mentioned in 1.2.) through the device nodes:
- /dev/ttyGU0 for M105 (USB data boxes)
- /dev/ttyGB0 for the base driver (direct USB connection)
You can also select a "default device" which is used by the frontends when
no device node is given as parameter, by creating a symlink /dev/ttyG to
one of them, eg.:
ln -s /dev/ttyGB0 /dev/ttyG
2.3. ISDN4linux
----------
This is the "normal" mode of operation. After loading the module you can
set up the ISDN system just as you'd do with any ISDN card.
Your distribution should provide some configuration utility.
If not, you can use some HOWTOs like
http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
If this doesn't work, because you have some recent device like SX100 where
debug output (see section 3.2.) shows something like this when dialing
CMD Received: ERROR
Available Params: 0
Connection State: 0, Response: -1
gigaset_process_response: resp_code -1 in ConState 0 !
Timeout occurred
you might need to use unimodem mode:
2.4. Unimodem mode
-------------
This is needed for some devices [e.g. SX100] as they have problems with
the "normal" commands.
If you have installed the command line tool gigacontr, you can enter
unimodem mode using
gigacontr --mode unimodem
You can switch back using
gigacontr --mode isdn
You can also load the driver using e.g.
modprobe usb_gigaset startmode=0
to prevent the driver from starting in "isdn4linux mode".
In this mode the device works like a modem connected to a serial port
(the /dev/ttyGU0, ... mentioned above) which understands the commands
ATZ init, reset
=> OK or ERROR
ATD
ATDT dial
=> OK, CONNECT,
BUSY,
NO DIAL TONE,
NO CARRIER,
NO ANSWER
<pause>+++<pause> change to command mode when connected
ATH hangup
You can use some configuration tool of your distribution to configure this
"modem" or configure pppd/wvdial manually. There are some example ppp
configuration files and chat scripts in the gigaset-VERSION/ppp directory.
Please note that the USB drivers are not able to change the state of the
control lines (the M105 driver can be configured to use some undocumented
control requests, if you really need the control lines, though). This means
you must use "Stupid Mode" if you are using wvdial or you should use the
nocrtscts option of pppd.
You must also assure that the ppp_async module is loaded with the parameter
flag_time=0. You can do this e.g. by adding a line like
options ppp_async flag_time=0
to /etc/modprobe.conf. If your distribution has some local module
configuration file like /etc/modprobe.conf.local,
using that should be preferred.
2.5. Call-ID (CID) mode
------------------
Call-IDs are numbers used to tag commands to, and responses from, the
Gigaset base in order to support the simultaneous handling of multiple
ISDN calls. Their use can be enabled ("CID mode") or disabled ("Unimodem
mode"). Without Call-IDs (in Unimodem mode), only a very limited set of
functions is available. It allows outgoing data connections only, but
does not signal incoming calls or other base events.
DECT cordless data devices (M10x) permanently occupy the cordless
connection to the base while Call-IDs are activated. As the Gigaset
bases only support one DECT data connection at a time, this prevents
other DECT cordless data devices from accessing the base.
During active operation, the driver switches to the necessary mode
automatically. However, for the reasons above, the mode chosen when
the device is not in use (idle) can be selected by the user.
- If you want to receive incoming calls, you can use the default
settings (CID mode).
- If you have several DECT data devices (M10x) which you want to use
in turn, select Unimodem mode by passing the parameter "cidmode=0" to
the driver ("modprobe usb_gigaset cidmode=0" or modprobe.conf).
If you want both of these at once, you are out of luck.
You can also use /sys/module/<name>/parameters/cidmode for changing
the CID mode setting (<name> is usb_gigaset or bas_gigaset).
3. Troubleshooting
---------------
3.1. Solutions to frequently reported problems
-----------------------------------------
Problem:
You have a slow provider and isdn4linux gives up dialing too early.
Solution:
Load the isdn module using the dialtimeout option. You can do this e.g.
by adding a line like
options isdn dialtimeout=15
to /etc/modprobe.conf. If your distribution has some local module
configuration file like /etc/modprobe.conf.local,
using that should be preferred.
Problem:
Your isdn script aborts with a message about isdnlog.
Solution:
Try deactivating (or commenting out) isdnlog. This driver does not
support it.
Problem:
You have two or more DECT data adapters (M101/M105) and only the
first one you turn on works.
Solution:
Select Unimodem mode for all DECT data adapters. (see section 2.4.)
3.2. Telling the driver to provide more information
----------------------------------------------
Building the driver with the "Gigaset debugging" kernel configuration
option (CONFIG_GIGASET_DEBUG) gives it the ability to produce additional
information useful for debugging.
You can control the amount of debugging information the driver produces by
writing an appropriate value to /sys/module/gigaset/parameters/debug, e.g.
echo 0 > /sys/module/gigaset/parameters/debug
switches off debugging output completely,
echo 0x10a020 > /sys/module/gigaset/parameters/debug
enables the standard set of debugging output messages. These values are
bit patterns where every bit controls a certain type of debugging output.
See the constants DEBUG_* in the source file gigaset.h for details.
The initial value can be set using the debug parameter when loading the
module "gigaset", e.g. by adding a line
options gigaset debug=0
to /etc/modprobe.conf, ...
Generated debugging information can be found
- as output of the command
dmesg
- in system log files written by your syslog daemon, usually
in /var/log/, e.g. /var/log/messages.
3.3. Reporting problems and bugs
---------------------------
If you can't solve problems with the driver on your own, feel free to
use one of the forums, bug trackers, or mailing lists on
http://sourceforge.net/projects/gigaset307x
or write an electronic mail to the maintainers.
Try to provide as much information as possible, such as
- distribution
- kernel version (uname -r)
- gcc version (gcc --version)
- hardware architecture (uname -m, ...)
- type and firmware version of your device (base and wireless module,
if any)
- output of "lsusb -v" (if using an USB device)
- error messages
- relevant system log messages (it would help if you activate debug
output as described in 3.2.)
For help with general configuration problems not specific to our driver,
such as isdn4linux and network configuration issues, please refer to the
appropriate forums and newsgroups.
3.4. Reporting problem solutions
---------------------------
If you solved a problem with our drivers, wrote startup scripts for your
distribution, ... feel free to contact us (using one of the places
mentioned in 3.3.). We'd like to add scripts, hints, documentation
to the driver and/or the project web page.
4. Links, other software
---------------------
- Sourceforge project developing this driver and associated tools
http://sourceforge.net/projects/gigaset307x
- Yahoo! Group on the Siemens Gigaset family of devices
http://de.groups.yahoo.com/group/Siemens-Gigaset
- Siemens Gigaset/T-Sinus compatibility table
http://www.erbze.info/sinus_gigaset.htm
5. Credits
-------
Thanks to
Karsten Keil
for his help with isdn4linux
Deti Fliegl
for his base driver code
Dennis Dietrich
for his kernel 2.6 patches
Andreas Rummel
for his work and logs to get unimodem mode working
Andreas Degert
for his logs and patches to get cx 100 working
Dietrich Feist
for his generous donation of one M105 and two M101 cordless adapters
Christoph Schweers
for his generous donation of a M34 device
and all the other people who sent logs and other information.

View File

@ -44,7 +44,7 @@ What is covered within this file is mainly information to authors
of modules. The author of an external modules should supply
a makefile that hides most of the complexity so one only has to type
'make' to build the module. A complete example will be present in
chapter ¤. Creating a kbuild file for an external module".
chapter 4, "Creating a kbuild file for an external module".
=== 2. How to build external modules

View File

@ -919,11 +919,11 @@ int main(int argc, char **argv)
int settle_time = 60;
/* Parse the simple command-line */
if (ac == 2)
disk = av[1];
else if (ac == 4) {
settle_time = atoi(av[2]);
disk = av[3];
if (argc == 2)
disk = argv[1];
else if (argc == 4) {
settle_time = atoi(argv[2]);
disk = argv[3];
} else
usage();

View File

@ -610,6 +610,7 @@ loads. Consider the following sequence of events:
CPU 1 CPU 2
======================= =======================
{ B = 7; X = 9; Y = 8; C = &Y }
STORE A = 1
STORE B = 2
<write barrier>
@ -651,7 +652,20 @@ In the above example, CPU 2 perceives that B is 7, despite the load of *C
(which would be B) coming after the the LOAD of C.
If, however, a data dependency barrier were to be placed between the load of C
and the load of *C (ie: B) on CPU 2, then the following will occur:
and the load of *C (ie: B) on CPU 2:
CPU 1 CPU 2
======================= =======================
{ B = 7; X = 9; Y = 8; C = &Y }
STORE A = 1
STORE B = 2
<write barrier>
STORE C = &B LOAD X
STORE D = 4 LOAD C (gets &B)
<data dependency barrier>
LOAD *C (reads B)
then the following will occur:
+-------+ : : : :
| | +------+ +-------+
@ -829,8 +843,8 @@ There are some more advanced barrier functions:
(*) smp_mb__after_atomic_inc();
These are for use with atomic add, subtract, increment and decrement
functions, especially when used for reference counting. These functions
do not imply memory barriers.
functions that don't return a value, especially when used for reference
counting. These functions do not imply memory barriers.
As an example, consider a piece of code that marks an object as being dead
and then decrements the object's reference count:
@ -1263,15 +1277,17 @@ else.
ATOMIC OPERATIONS
-----------------
Though they are technically interprocessor interaction considerations, atomic
operations are noted specially as they do _not_ generally imply memory
barriers. The possible offenders include:
Whilst they are technically interprocessor interaction considerations, atomic
operations are noted specially as some of them imply full memory barriers and
some don't, but they're very heavily relied on as a group throughout the
kernel.
Any atomic operation that modifies some state in memory and returns information
about the state (old or new) implies an SMP-conditional general memory barrier
(smp_mb()) on each side of the actual operation. These include:
xchg();
cmpxchg();
test_and_set_bit();
test_and_clear_bit();
test_and_change_bit();
atomic_cmpxchg();
atomic_inc_return();
atomic_dec_return();
@ -1282,21 +1298,31 @@ barriers. The possible offenders include:
atomic_sub_and_test();
atomic_add_negative();
atomic_add_unless();
test_and_set_bit();
test_and_clear_bit();
test_and_change_bit();
These may be used for such things as implementing LOCK operations or controlling
the lifetime of objects by decreasing their reference counts. In such cases
they need preceding memory barriers.
These are used for such things as implementing LOCK-class and UNLOCK-class
operations and adjusting reference counters towards object destruction, and as
such the implicit memory barrier effects are necessary.
The following may also be possible offenders as they may be used as UNLOCK
operations.
The following operation are potential problems as they do _not_ imply memory
barriers, but might be used for implementing such things as UNLOCK-class
operations:
atomic_set();
set_bit();
clear_bit();
change_bit();
atomic_set();
With these the appropriate explicit memory barrier should be used if necessary
(smp_mb__before_clear_bit() for instance).
The following are a little tricky:
The following also do _not_ imply memory barriers, and so may require explicit
memory barriers under some circumstances (smp_mb__before_atomic_dec() for
instance)):
atomic_add();
atomic_sub();
@ -1317,10 +1343,12 @@ specific order.
Basically, each usage case has to be carefully considered as to whether memory
barriers are needed or not. The simplest rule is probably: if the atomic
operation is protected by a lock, then it does not require a barrier unless
there's another operation within the critical section with respect to which an
ordering must be maintained.
barriers are needed or not.
[!] Note that special memory barrier primitives are available for these
situations because on some CPUs the atomic instructions used imply full memory
barriers, and so barrier instructions are superfluous in conjunction with them,
and in such cases the special barrier primitives will be no-ops.
See Documentation/atomic_ops.txt for more information.

View File

@ -138,19 +138,29 @@ Reading MTRRs from a C program using ioctl()'s:
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <errno.h>
#define MTRR_NEED_STRINGS
#include <asm/mtrr.h>
#define TRUE 1
#define FALSE 0
#define ERRSTRING strerror (errno)
static char *mtrr_strings[MTRR_NUM_TYPES] =
{
"uncachable", /* 0 */
"write-combining", /* 1 */
"?", /* 2 */
"?", /* 3 */
"write-through", /* 4 */
"write-protect", /* 5 */
"write-back", /* 6 */
};
int main ()
{
@ -232,13 +242,22 @@ Creating MTRRs from a C programme using ioctl()'s:
#include <fcntl.h>
#include <sys/ioctl.h>
#include <errno.h>
#define MTRR_NEED_STRINGS
#include <asm/mtrr.h>
#define TRUE 1
#define FALSE 0
#define ERRSTRING strerror (errno)
static char *mtrr_strings[MTRR_NUM_TYPES] =
{
"uncachable", /* 0 */
"write-combining", /* 1 */
"?", /* 2 */
"?", /* 3 */
"write-through", /* 4 */
"write-protect", /* 5 */
"write-back", /* 6 */
};
int main (int argc, char **argv)
{

View File

@ -19,9 +19,9 @@ TABLE OF CONTENTS
[2-1-1] Overview
[2-1-2] Flow of scmds through EH
[2-1-3] Flow of control
[2-2] EH through hostt->eh_strategy_handler()
[2-2-1] Pre hostt->eh_strategy_handler() SCSI midlayer conditions
[2-2-2] Post hostt->eh_strategy_handler() SCSI midlayer conditions
[2-2] EH through transportt->eh_strategy_handler()
[2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions
[2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions
[2-2-3] Things to consider
@ -413,9 +413,9 @@ scmd->allowed.
layer of failure of the scmds.
[2-2] EH through hostt->eh_strategy_handler()
[2-2] EH through transportt->eh_strategy_handler()
hostt->eh_strategy_handler() is invoked in the place of
transportt->eh_strategy_handler() is invoked in the place of
scsi_unjam_host() and it is responsible for whole recovery process.
On completion, the handler should have made lower layers forget about
all failed scmds and either ready for new commands or offline. Also,
@ -424,7 +424,7 @@ SCSI midlayer. IOW, of the steps described in [2-1-2], all steps
except for #1 must be implemented by eh_strategy_handler().
[2-2-1] Pre hostt->eh_strategy_handler() SCSI midlayer conditions
[2-2-1] Pre transportt->eh_strategy_handler() SCSI midlayer conditions
The following conditions are true on entry to the handler.
@ -437,7 +437,7 @@ except for #1 must be implemented by eh_strategy_handler().
- shost->host_failed == shost->host_busy
[2-2-2] Post hostt->eh_strategy_handler() SCSI midlayer conditions
[2-2-2] Post transportt->eh_strategy_handler() SCSI midlayer conditions
The following conditions must be true on exit from the handler.

View File

@ -804,7 +804,6 @@ Summary:
eh_bus_reset_handler - issue SCSI bus reset
eh_device_reset_handler - issue SCSI device reset
eh_host_reset_handler - reset host (host bus adapter)
eh_strategy_handler - driver supplied alternate to scsi_unjam_host()
info - supply information about given host
ioctl - driver can respond to ioctls
proc_info - supports /proc/scsi/{driver_name}/{host_no}
@ -969,24 +968,6 @@ Details:
int eh_host_reset_handler(struct scsi_cmnd * scp)
/**
* eh_strategy_handler - driver supplied alternate to scsi_unjam_host()
* @shp: host on which error has occurred
*
* Returns TRUE if host unjammed, else FALSE.
*
* Locks: none
*
* Calling context: kernel thread
*
* Notes: Invoked from scsi_eh thread. LLD supplied alternate to
* scsi_unjam_host() found in scsi_error.c
*
* Optionally defined in: LLD
**/
int eh_strategy_handler(struct Scsi_Host * shp)
/**
* info - supply information about given host: driver name plus data
* to distinguish given host

View File

@ -1123,8 +1123,8 @@
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check PCI availability (28bit DMA) */
if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
printk(KERN_ERR "error to set 28bit mask DMA\n");
pci_disable_device(pci);
return -ENXIO;
@ -1216,7 +1216,7 @@
The allocation of PCI resources is done in the
<function>probe()</function> function, and usually an extra
<function>xxx_create()</function> function is written for this
purpose.
purpose.
</para>
<para>
@ -1225,7 +1225,7 @@
allocating resources. Also, you need to set the proper PCI DMA
mask to limit the accessed i/o range. In some cases, you might
need to call <function>pci_set_master()</function> function,
too.
too.
</para>
<para>
@ -1236,8 +1236,8 @@
<![CDATA[
if ((err = pci_enable_device(pci)) < 0)
return err;
if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
printk(KERN_ERR "error to set 28bit mask DMA\n");
pci_disable_device(pci);
return -ENXIO;
@ -1256,13 +1256,13 @@
functions. Unlike ALSA ver.0.5.x., there are no helpers for
that. And these resources must be released in the destructor
function (see below). Also, on ALSA 0.9.x, you don't need to
allocate (pseudo-)DMA for PCI like ALSA 0.5.x.
allocate (pseudo-)DMA for PCI like ALSA 0.5.x.
</para>
<para>
Now assume that this PCI device has an I/O port with 8 bytes
and an interrupt. Then struct <structname>mychip</structname> will have the
following fields:
following fields:
<informalexample>
<programlisting>

View File

@ -27,7 +27,7 @@ number of free hugetlb pages at any time. It also displays information about
the configured hugepage size - this is needed for generating the proper
alignment and size of the arguments to the above system calls.
The output of "cat /proc/meminfo" will have output like:
The output of "cat /proc/meminfo" will have lines like:
.....
HugePages_Total: xxx
@ -42,11 +42,11 @@ pages in the kernel. Super user can dynamically request more (or free some
pre-configured) hugepages.
The allocation (or deallocation) of hugetlb pages is possible only if there are
enough physically contiguous free pages in system (freeing of hugepages is
possible only if there are enough hugetlb pages free that can be transfered
possible only if there are enough hugetlb pages free that can be transferred
back to regular memory pool).
Pages that are used as hugetlb pages are reserved inside the kernel and can
not be used for other purposes.
Pages that are used as hugetlb pages are reserved inside the kernel and cannot
be used for other purposes.
Once the kernel with Hugetlb page support is built and running, a user can
use either the mmap system call or shared memory system calls to start using
@ -60,7 +60,7 @@ Use the following command to dynamically allocate/deallocate hugepages:
This command will try to configure 20 hugepages in the system. The success
or failure of allocation depends on the amount of physically contiguous
memory that is preset in system at this time. System administrators may want
to put this command in one of the local rc init file. This will enable the
to put this command in one of the local rc init files. This will enable the
kernel to request huge pages early in the boot process (when the possibility
of getting physical contiguous pages is still very high).
@ -78,8 +78,8 @@ the uid and gid of the current process are taken. The mode option sets the
mode of root of file system to value & 0777. This value is given in octal.
By default the value 0755 is picked. The size option sets the maximum value of
memory (huge pages) allowed for that filesystem (/mnt/huge). The size is
rounded down to HPAGE_SIZE. The option nr_inode sets the maximum number of
inodes that /mnt/huge can use. If the size or nr_inode options are not
rounded down to HPAGE_SIZE. The option nr_inodes sets the maximum number of
inodes that /mnt/huge can use. If the size or nr_inodes options are not
provided on command line then no limits are set. For size and nr_inodes
options, you can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For
example, size=2K has the same meaning as size=2048. An example is given at
@ -88,7 +88,7 @@ the end of this document.
read and write system calls are not supported on files that reside on hugetlb
file systems.
A regular chown, chgrp and chmod commands (with right permissions) could be
Regular chown, chgrp, and chmod commands (with right permissions) could be
used to change the file attributes on hugetlbfs.
Also, it is important to note that no such mount command is required if the
@ -96,8 +96,8 @@ applications are going to use only shmat/shmget system calls. Users who
wish to use hugetlb page via shared memory segment should be a member of
a supplementary group and system admin needs to configure that gid into
/proc/sys/vm/hugetlb_shm_group. It is possible for same or different
applications to use any combination of mmaps and shm* calls. Though the
mount of filesystem will be required for using mmaps.
applications to use any combination of mmaps and shm* calls, though the
mount of filesystem will be required for using mmap calls.
*******************************************************************

View File

@ -151,6 +151,11 @@ NUMA
numa=fake=X Fake X nodes and ignore NUMA setup of the actual machine.
numa=hotadd=percent
Only allow hotadd memory to preallocate page structures upto
percent of already available memory.
numa=hotadd=0 will disable hotadd memory.
ACPI
acpi=off Don't enable ACPI

2
Kbuild
View File

@ -18,7 +18,7 @@ define sed-y
"/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"
endef
# Override default regexp for specific architectures
sed-$(CONFIG_MIPS) := "/^@@@/s///p"
sed-$(CONFIG_MIPS) := "/^@@@/{s/^@@@//; s/ \#.*\$$//; p;}"
quiet_cmd_offsets = GEN $@
define cmd_offsets

View File

@ -1556,9 +1556,7 @@ S: Maintained
KEXEC
P: Eric Biederman
P: Randy Dunlap
M: ebiederm@xmission.com
M: rdunlap@xenotime.net
W: http://www.xmission.com/~ebiederm/files/kexec/
L: linux-kernel@vger.kernel.org
L: fastboot@osdl.org

View File

@ -1112,7 +1112,6 @@ modules_install: _emodinst_ _emodinst_post
install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
PHONY += _emodinst_
_emodinst_:
$(Q)rm -rf $(MODLIB)/$(install-dir)
$(Q)mkdir -p $(MODLIB)/$(install-dir)
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
@ -1275,40 +1274,43 @@ kernelversion:
# Single targets
# ---------------------------------------------------------------------------
# The directory part is taken from first prerequisite, so this
# works even with external modules
%.s: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
%.i: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
%.o: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
%.lst: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
%.s: %.S prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
%.o: %.S prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
# Single targets are compatible with:
# - build whith mixed source and output
# - build with separate output dir 'make O=...'
# - external modules
#
# target-dir => where to store outputfile
# build-dir => directory in kernel source tree to use
# For external modules we shall include any directory of the target,
# but usual case there is no directory part.
# make M=`pwd` module.o => $(dir $@)=./
# make M=`pwd` foo/module.o => $(dir $@)=foo/
# make M=`pwd` / => $(dir $@)=/
ifeq ($(KBUILD_EXTMOD),)
target-dir = $(@D)
build-dir = $(patsubst %/,%,$(dir $@))
target-dir = $(dir $@)
else
zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
target-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
endif
/ %/: scripts prepare FORCE
%.s: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.i: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.o: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.lst: %.c prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.s: %.S prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
%.o: %.S prepare scripts FORCE
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
# Modules
/ %/: prepare scripts FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
$(build)=$(target-dir)
%.ko: scripts FORCE
$(build)=$(build-dir)
%.ko: prepare scripts FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
$(build)=$(target-dir) $(@:.ko=.o)
$(build)=$(build-dir) $(@:.ko=.o)
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
# FIXME Should go into a make.lib or something

View File

@ -549,6 +549,11 @@ config NUMA
Access). This option is for configuring high-end multiprocessor
server machines. If in doubt, say N.
config NODES_SHIFT
int
default "7"
depends on NEED_MULTIPLE_NODES
# LARGE_VMALLOC is racy, if you *really* need it then fix it first
config ALPHA_LARGE_VMALLOC
bool

View File

@ -76,7 +76,6 @@ EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strncat);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(memcmp);

View File

@ -24,6 +24,7 @@
#include <linux/config.h> /* CONFIG_ALPHA_LCA etc */
#include <linux/mc146818rtc.h>
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/string.h>
@ -471,6 +472,22 @@ page_is_ram(unsigned long pfn)
return 0;
}
static int __init
register_cpus(void)
{
int i;
for_each_possible_cpu(i) {
struct cpu *p = kzalloc(sizeof(*p), GFP_KERNEL);
if (!p)
return -ENOMEM;
register_cpu(p, i, NULL);
}
return 0;
}
arch_initcall(register_cpus);
void __init
setup_arch(char **cmdline_p)
{

View File

@ -439,7 +439,7 @@ setup_smp(void)
if ((cpu->flags & 0x1cc) == 0x1cc) {
smp_num_probed++;
/* Assume here that "whami" == index */
cpu_set(i, cpu_possible_map);
cpu_set(i, cpu_present_mask);
cpu->pal_revision = boot_cpu_palrev;
}
@ -450,9 +450,8 @@ setup_smp(void)
}
} else {
smp_num_probed = 1;
cpu_set(boot_cpuid, cpu_possible_map);
cpu_set(boot_cpuid, cpu_present_mask);
}
cpu_present_mask = cpumask_of_cpu(boot_cpuid);
printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
smp_num_probed, cpu_possible_map.bits[0]);
@ -488,9 +487,8 @@ void __devinit
smp_prepare_boot_cpu(void)
{
/*
* Mark the boot cpu (current cpu) as both present and online
* Mark the boot cpu (current cpu) as online
*/
cpu_set(smp_processor_id(), cpu_present_mask);
cpu_set(smp_processor_id(), cpu_online_map);
}

View File

@ -512,6 +512,12 @@ config ARCH_DISCONTIGMEM_ENABLE
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
config NODES_SHIFT
int
default "4" if ARCH_LH7A40X
default "2"
depends on NEED_MULTIPLE_NODES
source "mm/Kconfig"
config LEDS

View File

@ -18,6 +18,7 @@ SECTIONS
_start = .;
*(.start)
*(.text)
*(.text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata)

View File

@ -101,7 +101,6 @@ EXPORT_SYMBOL(__raw_writesl);
/* string / mem functions */
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);

View File

@ -322,6 +322,12 @@ static void __init setup_processor(void)
sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
#ifndef CONFIG_ARM_THUMB
elf_hwcap &= ~HWCAP_THUMB;
#endif
#ifndef CONFIG_VFP
elf_hwcap &= ~HWCAP_VFP;
#endif
cpu_proc_init();
}

View File

@ -25,10 +25,6 @@
#include <asm/arch/mux.h>
#include <asm/arch/gpio.h>
extern void omap_nop_release(struct device *dev);
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_OMAP1610_IR) || defined(CONFIG_OMAP161O_IR_MODULE)
static u64 irda_dmamask = 0xffffffff;
@ -37,7 +33,6 @@ static struct platform_device omap1610ir_device = {
.name = "omap1610-ir",
.id = -1,
.dev = {
.release = omap_nop_release,
.dma_mask = &irda_dmamask,
},
};
@ -84,9 +79,6 @@ static struct resource rtc_resources[] = {
static struct platform_device omap_rtc_device = {
.name = "omap_rtc",
.id = -1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
@ -124,9 +116,6 @@ static struct resource sti_resources[] = {
static struct platform_device sti_device = {
.name = "sti",
.id = -1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(sti_resources),
.resource = sti_resources,
};

View File

@ -25,10 +25,6 @@
#include <asm/arch/mux.h>
#include <asm/arch/gpio.h>
extern void omap_nop_release(struct device *dev);
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
#define OMAP2_I2C_BASE2 0x48072000
@ -49,9 +45,6 @@ static struct resource i2c_resources2[] = {
static struct platform_device omap_i2c_device2 = {
.name = "i2c_omap",
.id = 2,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(i2c_resources2),
.resource = i2c_resources2,
};
@ -100,9 +93,6 @@ static struct resource sti_resources[] = {
static struct platform_device sti_device = {
.name = "sti",
.id = -1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(sti_resources),
.resource = sti_resources,
};

View File

@ -367,6 +367,8 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
source = S3C2410_MISCCR_CLK0_UPLL;
else if (parent == &clk_f)
source = S3C2410_MISCCR_CLK0_FCLK;
else if (parent == &clk_h)
source = S3C2410_MISCCR_CLK0_HCLK;
else if (parent == &clk_p)
source = S3C2410_MISCCR_CLK0_PCLK;
else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
@ -376,6 +378,8 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
else
return -EINVAL;
clk->parent = parent;
if (clk == &s3c24xx_dclk0)
mask = S3C2410_MISCCR_CLK0_MASK;
else {

View File

@ -37,6 +37,7 @@
#include <asm/arch/nand.h>
#include "common-smdk.h"
#include "devs.h"
#include "pm.h"

View File

@ -10,7 +10,7 @@
#include <linux/config.h>
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/memory.h>
#include <asm/page.h>
#include "proc-macros.S"
@ -46,6 +46,11 @@
*/
#define CACHE_DLIMIT (CACHE_DSIZE * 4)
.data
flush_base:
.long FLUSH_BASE
.text
/*
* flush_user_cache_all()
*
@ -63,11 +68,21 @@ ENTRY(v4wb_flush_kern_cache_all)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
__flush_whole_cache:
mov r0, #FLUSH_BASE
add r1, r0, #CACHE_DSIZE
1: ldr r2, [r0], #32
cmp r0, r1
ldr r3, =flush_base
ldr r1, [r3, #0]
eor r1, r1, #CACHE_DSIZE
str r1, [r3, #0]
add r2, r1, #CACHE_DSIZE
1: ldr r3, [r1], #32
cmp r1, r2
blo 1b
#ifdef FLUSH_BASE_MINICACHE
add r2, r2, #FLUSH_BASE_MINICACHE - FLUSH_BASE
sub r1, r2, #512 @ only 512 bytes
1: ldr r3, [r1], #32
cmp r1, r2
blo 1b
#endif
mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
mov pc, lr
@ -82,6 +97,7 @@ __flush_whole_cache:
* - flags - vma_area_struct flags describing address space
*/
ENTRY(v4wb_flush_user_cache_range)
mov ip, #0
sub r3, r1, r0 @ calculate total size
tst r2, #VM_EXEC @ executable region?
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache

View File

@ -20,6 +20,7 @@
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
#include <asm/mach/arch.h>
@ -455,14 +456,14 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
#ifdef FLUSH_BASE
map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
map.virtual = FLUSH_BASE;
map.length = PGDIR_SIZE;
map.length = SZ_1M;
map.type = MT_CACHECLEAN;
create_mapping(&map);
#endif
#ifdef FLUSH_BASE_MINICACHE
map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + PGDIR_SIZE);
map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
map.virtual = FLUSH_BASE_MINICACHE;
map.length = PGDIR_SIZE;
map.length = SZ_1M;
map.type = MT_MINICLEAN;
create_mapping(&map);
#endif

View File

@ -26,22 +26,7 @@
* the cache line size of the I and D cache
*/
#define DCACHELINESIZE 32
#define FLUSH_OFFSET 32768
.macro flush_110_dcache rd, ra, re
ldr \rd, =flush_base
ldr \ra, [\rd]
eor \ra, \ra, #FLUSH_OFFSET
str \ra, [\rd]
add \re, \ra, #16384 @ only necessary for 16k
1001: ldr \rd, [\ra], #DCACHELINESIZE
teq \re, \ra
bne 1001b
.endm
.data
flush_base:
.long FLUSH_BASE
.text
/*
@ -145,13 +130,11 @@ ENTRY(cpu_sa110_dcache_clean_area)
*/
.align 5
ENTRY(cpu_sa110_switch_mm)
flush_110_dcache r3, ip, r1
mov r1, #0
mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
mcr p15, 0, r1, c7, c10, 4 @ drain WB
str lr, [sp, #-4]!
bl v4wb_flush_kern_cache_all @ clears IP
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
mov pc, lr
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
ldr pc, [sp], #4
/*
* cpu_sa110_set_pte(ptep, pte)

View File

@ -30,30 +30,6 @@
* the cache line size of the I and D cache
*/
#define DCACHELINESIZE 32
#define FLUSH_OFFSET 32768
.macro flush_1100_dcache rd, ra, re
ldr \rd, =flush_base
ldr \ra, [\rd]
eor \ra, \ra, #FLUSH_OFFSET
str \ra, [\rd]
add \re, \ra, #8192 @ only necessary for 8k
1001: ldr \rd, [\ra], #DCACHELINESIZE
teq \re, \ra
bne 1001b
#ifdef FLUSH_BASE_MINICACHE
add \ra, \ra, #FLUSH_BASE_MINICACHE - FLUSH_BASE
add \re, \ra, #512 @ only 512 bytes
1002: ldr \rd, [\ra], #DCACHELINESIZE
teq \re, \ra
bne 1002b
#endif
.endm
.data
flush_base:
.long FLUSH_BASE
.text
__INIT
@ -79,9 +55,8 @@ ENTRY(cpu_sa1100_proc_fin)
stmfd sp!, {lr}
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
flush_1100_dcache r0, r1, r2 @ clean caches
mov r0, #0
mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching
bl v4wb_flush_kern_cache_all
mcr p15, 0, ip, c15, c2, 2 @ Disable clock switching
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
@ -167,14 +142,12 @@ ENTRY(cpu_sa1100_dcache_clean_area)
*/
.align 5
ENTRY(cpu_sa1100_switch_mm)
flush_1100_dcache r3, ip, r1
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
str lr, [sp, #-4]!
bl v4wb_flush_kern_cache_all @ clears IP
mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mov pc, lr
ldr pc, [sp], #4
/*
* cpu_sa1100_set_pte(ptep, pte)

View File

@ -58,7 +58,7 @@ struct clk * clk_get(struct device *dev, const char *id)
if (p->id == idno &&
strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
goto found;
}
}
@ -69,6 +69,7 @@ struct clk * clk_get(struct device *dev, const char *id)
}
}
found:
mutex_unlock(&clocks_mutex);
return clk;

View File

@ -26,14 +26,6 @@
#include <asm/arch/gpio.h>
#include <asm/arch/menelaus.h>
void omap_nop_release(struct device *dev)
{
/* Nothing */
}
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
#define OMAP1_I2C_BASE 0xfffb3800
@ -59,9 +51,6 @@ static struct resource i2c_resources1[] = {
static struct platform_device omap_i2c_device1 = {
.name = "i2c_omap",
.id = 1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(i2c_resources1),
.resource = i2c_resources1,
};
@ -187,7 +176,6 @@ static struct platform_device mmc_omap_device1 = {
.name = "mmci-omap",
.id = 1,
.dev = {
.release = omap_nop_release,
.dma_mask = &mmc1_dmamask,
.platform_data = &mmc1_conf,
},
@ -217,7 +205,6 @@ static struct platform_device mmc_omap_device2 = {
.name = "mmci-omap",
.id = 2,
.dev = {
.release = omap_nop_release,
.dma_mask = &mmc2_dmamask,
.platform_data = &mmc2_conf,
},
@ -321,9 +308,6 @@ static struct resource uwire_resources[] = {
static struct platform_device omap_uwire_device = {
.name = "omap_uwire",
.id = -1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(uwire_resources),
.resource = uwire_resources,
};
@ -365,9 +349,6 @@ static struct resource wdt_resources[] = {
static struct platform_device omap_wdt_device = {
.name = "omap_wdt",
.id = -1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(wdt_resources),
.resource = wdt_resources,
};
@ -401,9 +382,6 @@ static struct resource rng_resources[] = {
static struct platform_device omap_rng_device = {
.name = "omap_rng",
.id = -1,
.dev = {
.release = omap_nop_release,
},
.num_resources = ARRAY_SIZE(rng_resources),
.resource = rng_resources,
};

View File

@ -588,6 +588,7 @@ static u32 vfp_double_ftosi(int sd, int unused, int dm, u32 fpscr)
struct vfp_double vdm;
u32 d, exceptions = 0;
int rmode = fpscr & FPSCR_RMODE_MASK;
int tm;
vfp_double_unpack(&vdm, vfp_get_double(dm));
vfp_double_dump("VDM", &vdm);
@ -595,10 +596,14 @@ static u32 vfp_double_ftosi(int sd, int unused, int dm, u32 fpscr)
/*
* Do we have denormalised number?
*/
if (vfp_double_type(&vdm) & VFP_DENORMAL)
tm = vfp_double_type(&vdm);
if (tm & VFP_DENORMAL)
exceptions |= FPSCR_IDC;
if (vdm.exponent >= 1023 + 32) {
if (tm & VFP_NAN) {
d = 0;
exceptions |= FPSCR_IOC;
} else if (vdm.exponent >= 1023 + 32) {
d = 0x7fffffff;
if (vdm.sign)
d = ~d;
@ -1122,9 +1127,9 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
{
u32 op = inst & FOP_MASK;
u32 exceptions = 0;
unsigned int dd = vfp_get_sd(inst);
unsigned int dn = vfp_get_sn(inst);
unsigned int dm = vfp_get_sm(inst);
unsigned int dd = vfp_get_dd(inst);
unsigned int dn = vfp_get_dn(inst);
unsigned int dm = vfp_get_dm(inst);
unsigned int vecitr, veclen, vecstride;
u32 (*fop)(int, int, s32, u32);
@ -1141,7 +1146,7 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
(veclen >> FPSCR_LENGTH_BIT) + 1);
fop = (op == FOP_EXT) ? fop_extfns[dn] : fop_fns[FOP_TO_IDX(op)];
fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)];
if (!fop)
goto invalid;
@ -1149,17 +1154,13 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
u32 except;
if (op == FOP_EXT)
pr_debug("VFP: itr%d (d%u.%u) = op[%u] (d%u.%u)\n",
pr_debug("VFP: itr%d (d%u) = op[%u] (d%u)\n",
vecitr >> FPSCR_LENGTH_BIT,
dd >> 1, dd & 1, dn,
dm >> 1, dm & 1);
dd, dn, dm);
else
pr_debug("VFP: itr%d (d%u.%u) = (d%u.%u) op[%u] (d%u.%u)\n",
pr_debug("VFP: itr%d (d%u) = (d%u) op[%u] (d%u)\n",
vecitr >> FPSCR_LENGTH_BIT,
dd >> 1, dd & 1,
dn >> 1, dn & 1,
FOP_TO_IDX(op),
dm >> 1, dm & 1);
dd, dn, FOP_TO_IDX(op), dm);
except = fop(dd, dn, dm, fpscr);
pr_debug("VFP: itr%d: exceptions=%08x\n",

View File

@ -189,11 +189,10 @@ vfp_put_float:
.globl vfp_get_double
vfp_get_double:
mov r0, r0, lsr #1
add pc, pc, r0, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
mrrc p10, 1, r0, r1, c\dr @ fmrrd r0, r1, d\dr
mrrc p11, 1, r0, r1, c\dr @ fmrrd r0, r1, d\dr
mov pc, lr
.endr
@ -204,10 +203,9 @@ vfp_get_double:
.globl vfp_put_double
vfp_put_double:
mov r0, r0, lsr #1
add pc, pc, r0, lsl #3
mov r0, r0
.irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
mcrr p10, 1, r1, r2, c\dr @ fmrrd r1, r2, d\dr
mcrr p11, 1, r1, r2, c\dr @ fmdrr r1, r2, d\dr
mov pc, lr
.endr

View File

@ -632,6 +632,7 @@ static u32 vfp_single_ftosi(int sd, int unused, s32 m, u32 fpscr)
struct vfp_single vsm;
u32 d, exceptions = 0;
int rmode = fpscr & FPSCR_RMODE_MASK;
int tm;
vfp_single_unpack(&vsm, m);
vfp_single_dump("VSM", &vsm);
@ -639,10 +640,14 @@ static u32 vfp_single_ftosi(int sd, int unused, s32 m, u32 fpscr)
/*
* Do we have a denormalised number?
*/
tm = vfp_single_type(&vsm);
if (vfp_single_type(&vsm) & VFP_DENORMAL)
exceptions |= FPSCR_IDC;
if (vsm.exponent >= 127 + 32) {
if (tm & VFP_NAN) {
d = 0;
exceptions |= FPSCR_IOC;
} else if (vsm.exponent >= 127 + 32) {
/*
* m >= 2^31-2^7: invalid
*/
@ -1188,7 +1193,7 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr)
pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
(veclen >> FPSCR_LENGTH_BIT) + 1);
fop = (op == FOP_EXT) ? fop_extfns[sn] : fop_fns[FOP_TO_IDX(op)];
fop = (op == FOP_EXT) ? fop_extfns[FEXT_TO_IDX(inst)] : fop_fns[FOP_TO_IDX(op)];
if (!fop)
goto invalid;

View File

@ -152,7 +152,6 @@ EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(memset);

View File

@ -39,7 +39,6 @@ EXPORT_SYMBOL(loops_per_usec);
/* String functions */
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strchr);

View File

@ -1170,12 +1170,6 @@ __syscall_badsys:
# syscall vector table
#
###############################################################################
#ifdef CONFIG_MMU
#define __MMU(X) X
#else
#define __MMU(X) sys_ni_syscall
#endif
.section .rodata
ALIGN
.globl sys_call_table
@ -1305,7 +1299,7 @@ sys_call_table:
.long sys_newuname
.long sys_ni_syscall /* old "cacheflush" */
.long sys_adjtimex
.long __MMU(sys_mprotect) /* 125 */
.long sys_mprotect /* 125 */
.long sys_sigprocmask
.long sys_ni_syscall /* old "create_module" */
.long sys_init_module
@ -1324,16 +1318,16 @@ sys_call_table:
.long sys_getdents
.long sys_select
.long sys_flock
.long __MMU(sys_msync)
.long sys_msync
.long sys_readv /* 145 */
.long sys_writev
.long sys_getsid
.long sys_fdatasync
.long sys_sysctl
.long __MMU(sys_mlock) /* 150 */
.long __MMU(sys_munlock)
.long __MMU(sys_mlockall)
.long __MMU(sys_munlockall)
.long sys_mlock /* 150 */
.long sys_munlock
.long sys_mlockall
.long sys_munlockall
.long sys_sched_setparam
.long sys_sched_getparam /* 155 */
.long sys_sched_setscheduler
@ -1343,7 +1337,7 @@ sys_call_table:
.long sys_sched_get_priority_min /* 160 */
.long sys_sched_rr_get_interval
.long sys_nanosleep
.long __MMU(sys_mremap)
.long sys_mremap
.long sys_setresuid16
.long sys_getresuid16 /* 165 */
.long sys_ni_syscall /* for vm86 */
@ -1398,8 +1392,8 @@ sys_call_table:
.long sys_setfsuid /* 215 */
.long sys_setfsgid
.long sys_pivot_root
.long __MMU(sys_mincore)
.long __MMU(sys_madvise)
.long sys_mincore
.long sys_madvise
.long sys_getdents64 /* 220 */
.long sys_fcntl64
.long sys_ni_syscall /* reserved for TUX */
@ -1437,7 +1431,7 @@ sys_call_table:
.long sys_epoll_create
.long sys_epoll_ctl /* 255 */
.long sys_epoll_wait
.long __MMU(sys_remap_file_pages)
.long sys_remap_file_pages
.long sys_set_tid_address
.long sys_timer_create
.long sys_timer_settime /* 260 */

View File

@ -27,7 +27,6 @@ EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strchr);

View File

@ -25,7 +25,6 @@ extern char h8300_debug_device[];
/* platform dependent support */
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strchr);

View File

@ -53,6 +53,35 @@ source "init/Kconfig"
menu "Processor type and features"
config SMP
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
you have a system with more than one CPU, say Y.
If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on many, but not all,
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
Note that if you say Y here and choose architecture "586" or
"Pentium" under "Processor family", the kernel will not work on 486
architectures. Similarly, multiprocessor kernels for the "PPro"
architecture may not work on all Pentium based boards.
People using multiprocessor machines who say Y here should also say
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
See also the <file:Documentation/smp.txt>,
<file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
choice
prompt "Subarchitecture Type"
default X86_PC
@ -178,35 +207,6 @@ config HPET_EMULATE_RTC
depends on HPET_TIMER && RTC=y
default y
config SMP
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
you have a system with more than one CPU, say Y.
If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on many, but not all,
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
Note that if you say Y here and choose architecture "586" or
"Pentium" under "Processor family", the kernel will not work on 486
architectures. Similarly, multiprocessor kernels for the "PPro"
architecture may not work on all Pentium based boards.
People using multiprocessor machines who say Y here should also say
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
See also the <file:Documentation/smp.txt>,
<file:Documentation/i386/IO-APIC.txt>,
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
config NR_CPUS
int "Maximum number of CPUs (2-255)"
range 2 255
@ -522,6 +522,12 @@ config NUMA
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
config NODES_SHIFT
int
default "4" if X86_NUMAQ
default "3"
depends on NEED_MULTIPLE_NODES
config HAVE_ARCH_BOOTMEM_NODE
bool
depends on NUMA
@ -757,15 +763,6 @@ config HOTPLUG_CPU
Say N.
config DOUBLEFAULT
default y
bool "Enable doublefault exception handler" if EMBEDDED
help
This option allows trapping of rare doublefault exceptions that
would otherwise cause a system to silently reboot. Disabling this
option saves about 4k and might cause you much additional grey
hair.
endmenu

View File

@ -311,5 +311,5 @@ config X86_OOSTORE
config X86_TSC
bool
depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1 || MGEODE_LX) && !X86_NUMAQ
default y

View File

@ -97,6 +97,7 @@
#define PARAM_VESAPM_OFF 0x30
#define PARAM_LFB_PAGES 0x32
#define PARAM_VESA_ATTRIB 0x34
#define PARAM_CAPABILITIES 0x36
/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
#ifdef CONFIG_VIDEO_RETAIN
@ -233,6 +234,10 @@ mopar_gr:
movw 18(%di), %ax
movl %eax, %fs:(PARAM_LFB_SIZE)
# store mode capabilities
movl 10(%di), %eax
movl %eax, %fs:(PARAM_CAPABILITIES)
# switching the DAC to 8-bit is for <= 8 bpp only
movw %fs:(PARAM_LFB_DEPTH), %ax
cmpw $8, %ax

View File

@ -168,7 +168,7 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
unsigned long i;
int config_size;
if (!phys_addr || !size)
if (!phys_addr || !size || !cpu_has_apic)
return -EINVAL;
mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size);
@ -215,7 +215,7 @@ static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
{
struct acpi_table_madt *madt = NULL;
if (!phys_addr || !size)
if (!phys_addr || !size || !cpu_has_apic)
return -EINVAL;
madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size);
@ -693,6 +693,9 @@ static int __init acpi_parse_madt_lapic_entries(void)
{
int count;
if (!cpu_has_apic)
return -ENODEV;
/*
* Note that the LAPIC address is obtained from the MADT (32-bit value)
* and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
@ -751,6 +754,9 @@ static int __init acpi_parse_madt_ioapic_entries(void)
return -ENODEV;
}
if (!cpu_has_apic)
return -ENODEV;
/*
* if "noapic" boot option, don't look for IO-APICs
*/

View File

@ -62,6 +62,18 @@ int apic_verbosity;
static void apic_pm_activate(void);
int modern_apic(void)
{
unsigned int lvr, version;
/* AMD systems use old APIC versions, so check the CPU */
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86 >= 0xf)
return 1;
lvr = apic_read(APIC_LVR);
version = GET_APIC_VERSION(lvr);
return version >= 0x14;
}
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
@ -119,10 +131,7 @@ void enable_NMI_through_LVT0 (void * dummy)
int get_physical_broadcast(void)
{
unsigned int lvr, version;
lvr = apic_read(APIC_LVR);
version = GET_APIC_VERSION(lvr);
if (!APIC_INTEGRATED(version) || version >= 0x14)
if (modern_apic())
return 0xff;
else
return 0xf;
@ -349,9 +358,9 @@ int __init verify_local_APIC(void)
void __init sync_Arb_IDs(void)
{
/* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
if (ver >= 0x14) /* P4 or higher */
/* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1
And not needed on AMD */
if (modern_apic())
return;
/*
* Wait for idle.

View File

@ -212,8 +212,6 @@ static void __init init_amd(struct cpuinfo_x86 *c)
if (cpuid_eax(0x80000000) >= 0x80000008) {
c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
if (c->x86_max_cores & (c->x86_max_cores - 1))
c->x86_max_cores = 1;
}
if (cpuid_eax(0x80000000) >= 0x80000007) {

View File

@ -46,7 +46,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
#define VERSION "version 1.60.1"
#define VERSION "version 1.60.2"
#include "powernow-k8.h"
/* serialize freq changes */
@ -55,7 +55,7 @@ static DEFINE_MUTEX(fidvid_mutex);
static struct powernow_k8_data *powernow_data[NR_CPUS];
#ifndef CONFIG_SMP
static cpumask_t cpu_core_map[1] = { CPU_MASK_ALL };
static cpumask_t cpu_core_map[1];
#endif
/* Return a frequency in MHz, given an input fid */
@ -910,6 +910,9 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
unsigned int newstate;
int ret = -EIO;
if (!data)
return -EINVAL;
/* only run on specific CPU from here on */
oldmask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
@ -969,6 +972,9 @@ static int powernowk8_verify(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data = powernow_data[pol->cpu];
if (!data)
return -EINVAL;
return cpufreq_frequency_table_verify(pol, data->powernow_table);
}
@ -977,7 +983,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data;
cpumask_t oldmask = CPU_MASK_ALL;
int rc, i;
int rc;
if (!cpu_online(pol->cpu))
return -ENODEV;
@ -1063,8 +1069,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
data->currfid, data->currvid);
for_each_cpu_mask(i, cpu_core_map[pol->cpu])
powernow_data[i] = data;
powernow_data[pol->cpu] = data;
return 0;
@ -1101,6 +1106,9 @@ static unsigned int powernowk8_get (unsigned int cpu)
data = powernow_data[first_cpu(cpu_core_map[cpu])];
if (!data)
return -EINVAL;
if (!data)
return -EINVAL;

View File

@ -19,7 +19,6 @@ EXPORT_SYMBOL(__put_user_2);
EXPORT_SYMBOL(__put_user_4);
EXPORT_SYMBOL(__put_user_8);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strstr);
#ifdef CONFIG_SMP

View File

@ -38,12 +38,6 @@
int smp_found_config;
unsigned int __initdata maxcpus = NR_CPUS;
#ifdef CONFIG_HOTPLUG_CPU
#define CPU_HOTPLUG_ENABLED (1)
#else
#define CPU_HOTPLUG_ENABLED (0)
#endif
/*
* Various Linux-internal data structures created from the
* MP-table.
@ -110,21 +104,6 @@ static int __init mpf_checksum(unsigned char *mp, int len)
static int mpc_record;
static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __initdata;
#ifdef CONFIG_X86_NUMAQ
static int MP_valid_apicid(int apicid, int version)
{
return hweight_long(apicid & 0xf) == 1 && (apicid >> 4) != 0xf;
}
#else
static int MP_valid_apicid(int apicid, int version)
{
if (version >= 0x14)
return apicid < 0xff;
else
return apicid < 0xf;
}
#endif
static void __devinit MP_processor_info (struct mpc_config_processor *m)
{
int ver, apicid;
@ -190,12 +169,6 @@ static void __devinit MP_processor_info (struct mpc_config_processor *m)
ver = m->mpc_apicver;
if (!MP_valid_apicid(apicid, ver)) {
printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n",
m->mpc_apicid, MAX_APICS);
return;
}
/*
* Validate version
*/
@ -225,7 +198,14 @@ static void __devinit MP_processor_info (struct mpc_config_processor *m)
cpu_set(num_processors, cpu_possible_map);
num_processors++;
if (CPU_HOTPLUG_ENABLED || (num_processors > 8)) {
/*
* Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
* but we need to work other dependencies like SMP_SUSPEND etc
* before this can be done without some confusion.
* if (CPU_HOTPLUG_ENABLED || num_processors > 8)
* - Ashok Raj <ashok.raj@intel.com>
*/
if (num_processors > 8) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
if (!APIC_XAPIC(ver)) {
@ -249,6 +229,13 @@ static void __init MP_bus_info (struct mpc_config_bus *m)
mpc_oem_bus_info(m, str, translation_table[mpc_record]);
if (m->mpc_busid >= MAX_MP_BUSSES) {
printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
" is too large, max. supported is %d\n",
m->mpc_busid, str, MAX_MP_BUSSES - 1);
return;
}
if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {

View File

@ -51,7 +51,5 @@ void mach_reboot_fixups(void)
cur->reboot_fixup(dev);
}
printk(KERN_WARNING "No reboot fixup found for your hardware\n");
}

View File

@ -963,6 +963,36 @@ efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg)
return 0;
}
/*
* This function checks if the entire range <start,end> is mapped with type.
*
* Note: this function only works correct if the e820 table is sorted and
* not-overlapping, which is the case
*/
int __init
e820_all_mapped(unsigned long start, unsigned long end, unsigned type)
{
int i;
for (i = 0; i < e820.nr_map; i++) {
struct e820entry *ei = &e820.map[i];
if (type && ei->type != type)
continue;
/* is the region (part) in overlap with the current region ?*/
if (ei->addr >= end || ei->addr + ei->size <= start)
continue;
/* if the region is at the beginning of <start,end> we move
* start to the end of the region since it's ok until there
*/
if (ei->addr <= start)
start = ei->addr + ei->size;
/* if start is now at or beyond end, we're done, full
* coverage */
if (start >= end)
return 1; /* we're done */
}
return 0;
}
/*
* Find the highest page frame number we have available
*/
@ -1317,8 +1347,8 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat
/*
* Request address space for all standard resources
*
* This is called just before pcibios_assign_resources(), which is also
* an fs_initcall, but is linked in later (in arch/i386/pci/i386.c).
* This is called just before pcibios_init(), which is also a
* subsys_initcall, but is linked in later (in arch/i386/pci/common.c).
*/
static int __init request_standard_resources(void)
{
@ -1339,7 +1369,7 @@ static int __init request_standard_resources(void)
return 0;
}
fs_initcall(request_standard_resources);
subsys_initcall(request_standard_resources);
static void __init register_memory(void)
{

View File

@ -365,6 +365,9 @@ void die(const char * str, struct pt_regs * regs, long err)
if (++die.lock_owner_depth < 3) {
int nl = 0;
unsigned long esp;
unsigned short ss;
handle_BUG(regs);
printk(KERN_EMERG "%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
#ifdef CONFIG_PREEMPT
@ -387,8 +390,19 @@ void die(const char * str, struct pt_regs * regs, long err)
printk("\n");
if (notify_die(DIE_OOPS, str, regs, err,
current->thread.trap_no, SIGSEGV) !=
NOTIFY_STOP)
NOTIFY_STOP) {
show_registers(regs);
/* Executive summary in case the oops scrolled away */
esp = (unsigned long) (&regs->esp);
savesegment(ss, ss);
if (user_mode(regs)) {
esp = regs->esp;
ss = regs->xss & 0xffff;
}
printk(KERN_EMERG "EIP: [<%08lx>] ", regs->eip);
print_symbol("%s", regs->eip);
printk(" SS:ESP %04x:%08lx\n", ss, esp);
}
else
regs = NULL;
} else

View File

@ -106,9 +106,15 @@ voyager_module_t *voyager_cat_list;
/* the I/O port assignments for the VIC and QIC */
static struct resource vic_res = {
"Voyager Interrupt Controller", 0xFC00, 0xFC6F };
.name = "Voyager Interrupt Controller",
.start = 0xFC00,
.end = 0xFC6F
};
static struct resource qic_res = {
"Quad Interrupt Controller", 0xFC70, 0xFCFF };
.name = "Quad Interrupt Controller",
.start = 0xFC70,
.end = 0xFCFF
};
/* This function is used to pack a data bit stream inside a message.
* It writes num_bits of the data buffer in msg starting at start_bit.

View File

@ -651,6 +651,7 @@ void __init mem_init(void)
* Specifically, in the case of x86, we will always add
* memory to the highmem for now.
*/
#ifdef CONFIG_HOTPLUG_MEMORY
#ifndef CONFIG_NEED_MULTIPLE_NODES
int add_memory(u64 start, u64 size)
{
@ -667,6 +668,7 @@ int remove_memory(u64 start, u64 size)
return -EINVAL;
}
#endif
#endif
kmem_cache_t *pgd_cache;
kmem_cache_t *pmd_cache;

View File

@ -4,6 +4,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include "pci.h"
/*
@ -18,8 +19,10 @@ int pci_conf1_read(unsigned int seg, unsigned int bus,
{
unsigned long flags;
if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
if ((bus > 255) || (devfn > 255) || (reg > 255)) {
*value = -1;
return -EINVAL;
}
spin_lock_irqsave(&pci_config_lock, flags);
@ -91,8 +94,10 @@ static int pci_conf2_read(unsigned int seg, unsigned int bus,
unsigned long flags;
int dev, fn;
if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
if ((bus > 255) || (devfn > 255) || (reg > 255)) {
*value = -1;
return -EINVAL;
}
dev = PCI_SLOT(devfn);
fn = PCI_FUNC(devfn);
@ -188,6 +193,10 @@ static int __init pci_sanity_check(struct pci_raw_ops *o)
if (pci_probe & PCI_NO_CHECKS)
return 1;
/* Assume Type 1 works for newer systems.
This handles machines that don't have anything on PCI Bus 0. */
if (dmi_get_year(DMI_BIOS_DATE) >= 2001)
return 1;
for (devfn = 0; devfn < 0x100; devfn++) {
if (o->read(0, 0, devfn, PCI_CLASS_DEVICE, 2, &x))

View File

@ -12,14 +12,20 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <asm/e820.h>
#include "pci.h"
#define MMCONFIG_APER_SIZE (256*1024*1024)
/* Assume systems with more busses have correct MCFG */
#define MAX_CHECK_BUS 16
#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
/* The base address of the last MMCONFIG device accessed */
static u32 mmcfg_last_accessed_device;
static DECLARE_BITMAP(fallback_slots, 32);
static DECLARE_BITMAP(fallback_slots, MAX_CHECK_BUS*32);
/*
* Functions for accessing PCI configuration space with MMCONFIG accesses
@ -29,8 +35,8 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
int cfg_num = -1;
struct acpi_table_mcfg_config *cfg;
if (seg == 0 && bus == 0 &&
test_bit(PCI_SLOT(devfn), fallback_slots))
if (seg == 0 && bus < MAX_CHECK_BUS &&
test_bit(PCI_SLOT(devfn) + 32*bus, fallback_slots))
return 0;
while (1) {
@ -74,8 +80,10 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
unsigned long flags;
u32 base;
if (!value || (bus > 255) || (devfn > 255) || (reg > 4095))
if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
*value = -1;
return -EINVAL;
}
base = get_base_addr(seg, bus, devfn);
if (!base)
@ -146,29 +154,34 @@ static struct pci_raw_ops pci_mmcfg = {
Normally this can be expressed in the MCFG by not listing them
and assigning suitable _SEGs, but this isn't implemented in some BIOS.
Instead try to discover all devices on bus 0 that are unreachable using MM
and fallback for them.
We only do this for bus 0/seg 0 */
and fallback for them. */
static __init void unreachable_devices(void)
{
int i;
int i, k;
unsigned long flags;
for (i = 0; i < 32; i++) {
u32 val1;
u32 addr;
for (k = 0; k < MAX_CHECK_BUS; k++) {
for (i = 0; i < 32; i++) {
u32 val1;
u32 addr;
pci_conf1_read(0, 0, PCI_DEVFN(i, 0), 0, 4, &val1);
if (val1 == 0xffffffff)
continue;
pci_conf1_read(0, k, PCI_DEVFN(i, 0), 0, 4, &val1);
if (val1 == 0xffffffff)
continue;
/* Locking probably not needed, but safer */
spin_lock_irqsave(&pci_config_lock, flags);
addr = get_base_addr(0, 0, PCI_DEVFN(i, 0));
if (addr != 0)
pci_exp_set_dev_base(addr, 0, PCI_DEVFN(i, 0));
if (addr == 0 || readl((u32 __iomem *)mmcfg_virt_addr) != val1)
set_bit(i, fallback_slots);
spin_unlock_irqrestore(&pci_config_lock, flags);
/* Locking probably not needed, but safer */
spin_lock_irqsave(&pci_config_lock, flags);
addr = get_base_addr(0, k, PCI_DEVFN(i, 0));
if (addr != 0)
pci_exp_set_dev_base(addr, k, PCI_DEVFN(i, 0));
if (addr == 0 ||
readl((u32 __iomem *)mmcfg_virt_addr) != val1) {
set_bit(i, fallback_slots);
printk(KERN_NOTICE
"PCI: No mmconfig possible on %x:%x\n", k, i);
}
spin_unlock_irqrestore(&pci_config_lock, flags);
}
}
}
@ -183,6 +196,14 @@ void __init pci_mmcfg_init(void)
(pci_mmcfg_config[0].base_address == 0))
return;
if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
pci_mmcfg_config[0].base_address + MMCONFIG_APER_SIZE,
E820_RESERVED)) {
printk(KERN_ERR "PCI: BIOS Bug: MCFG area is not E820-reserved\n");
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
return;
}
printk(KERN_INFO "PCI: Using MMCONFIG\n");
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;

View File

@ -260,15 +260,6 @@ config NR_CPUS
than 64 will cause the use of a CPU mask array, causing a small
performance hit.
config IA64_NR_NODES
int "Maximum number of NODEs (256-1024)" if (IA64_SGI_SN2 || IA64_GENERIC)
range 256 1024
depends on IA64_SGI_SN2 || IA64_GENERIC
default "256"
help
This option specifies the maximum number of nodes in your SSI system.
If in doubt, use the default.
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && EXPERIMENTAL
@ -352,6 +343,16 @@ config NUMA
Access). This option is for configuring high-end multiprocessor
server systems. If in doubt, say N.
config NODES_SHIFT
int "Max num nodes shift(3-10)"
range 3 10
default "8"
depends on NEED_MULTIPLE_NODES
help
This option specifies the maximum number of nodes in your SSI system.
MAX_NUMNODES will be 2^(This value).
If in doubt, use the default.
# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
# VIRTUAL_MEM_MAP has been retained for historical reasons.
config VIRTUAL_MEM_MAP

View File

@ -1,105 +1,104 @@
/*
* arch/ia64/kernel/acpi-ext.c
* (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P.
* Alex Williamson <alex.williamson@hp.com>
* Bjorn Helgaas <bjorn.helgaas@hp.com>
*
* Copyright (C) 2003 Hewlett-Packard
* Copyright (C) Alex Williamson
* Copyright (C) Bjorn Helgaas
*
* Vendor specific extensions to ACPI.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/acpi.h>
#include <linux/efi.h>
#include <asm/acpi-ext.h>
struct acpi_vendor_descriptor {
u8 guid_id;
efi_guid_t guid;
/*
* Device CSRs that do not appear in PCI config space should be described
* via ACPI. This would normally be done with Address Space Descriptors
* marked as "consumer-only," but old versions of Windows and Linux ignore
* the producer/consumer flag, so HP invented a vendor-defined resource to
* describe the location and size of CSR space.
*/
struct acpi_vendor_uuid hp_ccsr_uuid = {
.subtype = 2,
.data = { 0xf9, 0xad, 0xe9, 0x69, 0x4f, 0x92, 0x5f, 0xab, 0xf6, 0x4a,
0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad },
};
struct acpi_vendor_info {
struct acpi_vendor_descriptor *descriptor;
u8 *data;
u32 length;
};
acpi_status
acpi_vendor_resource_match(struct acpi_resource *resource, void *context)
{
struct acpi_vendor_info *info = (struct acpi_vendor_info *)context;
struct acpi_resource_vendor *vendor;
struct acpi_vendor_descriptor *descriptor;
u32 byte_length;
if (resource->type != ACPI_RESOURCE_TYPE_VENDOR)
return AE_OK;
vendor = (struct acpi_resource_vendor *)&resource->data;
descriptor = (struct acpi_vendor_descriptor *)vendor->byte_data;
if (vendor->byte_length <= sizeof(*info->descriptor) ||
descriptor->guid_id != info->descriptor->guid_id ||
efi_guidcmp(descriptor->guid, info->descriptor->guid))
return AE_OK;
byte_length = vendor->byte_length - sizeof(struct acpi_vendor_descriptor);
info->data = acpi_os_allocate(byte_length);
if (!info->data)
return AE_NO_MEMORY;
memcpy(info->data,
vendor->byte_data + sizeof(struct acpi_vendor_descriptor),
byte_length);
info->length = byte_length;
return AE_CTRL_TERMINATE;
}
acpi_status
acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id,
u8 ** data, u32 * byte_length)
{
struct acpi_vendor_info info;
info.descriptor = id;
info.data = NULL;
acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match,
&info);
if (!info.data)
return AE_NOT_FOUND;
*data = info.data;
*byte_length = info.length;
return AE_OK;
}
struct acpi_vendor_descriptor hp_ccsr_descriptor = {
.guid_id = 2,
.guid =
EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01,
0x37, 0x0e, 0xad)
};
acpi_status hp_acpi_csr_space(acpi_handle obj, u64 * csr_base, u64 * csr_length)
static acpi_status hp_ccsr_locate(acpi_handle obj, u64 *base, u64 *length)
{
acpi_status status;
u8 *data;
u32 length;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_resource *resource;
struct acpi_resource_vendor_typed *vendor;
status =
acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length);
status = acpi_get_vendor_resource(obj, METHOD_NAME__CRS, &hp_ccsr_uuid,
&buffer);
if (ACPI_FAILURE(status) || length != 16)
resource = buffer.pointer;
vendor = &resource->data.vendor_typed;
if (ACPI_FAILURE(status) || vendor->byte_length < 16) {
status = AE_NOT_FOUND;
goto exit;
}
memcpy(base, vendor->byte_data, sizeof(*base));
memcpy(length, vendor->byte_data + 8, sizeof(*length));
exit:
acpi_os_free(buffer.pointer);
return status;
}
struct csr_space {
u64 base;
u64 length;
};
static acpi_status find_csr_space(struct acpi_resource *resource, void *data)
{
struct csr_space *space = data;
struct acpi_resource_address64 addr;
acpi_status status;
status = acpi_resource_to_address64(resource, &addr);
if (ACPI_SUCCESS(status) &&
addr.resource_type == ACPI_MEMORY_RANGE &&
addr.address_length &&
addr.producer_consumer == ACPI_CONSUMER) {
space->base = addr.minimum;
space->length = addr.address_length;
return AE_CTRL_TERMINATE;
}
return AE_OK; /* keep looking */
}
static acpi_status hp_crs_locate(acpi_handle obj, u64 *base, u64 *length)
{
struct csr_space space = { 0, 0 };
acpi_walk_resources(obj, METHOD_NAME__CRS, find_csr_space, &space);
if (!space.length)
return AE_NOT_FOUND;
memcpy(csr_base, data, sizeof(*csr_base));
memcpy(csr_length, data + 8, sizeof(*csr_length));
acpi_os_free(data);
*base = space.base;
*length = space.length;
return AE_OK;
}
acpi_status hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length)
{
acpi_status status;
status = hp_ccsr_locate(obj, csr_base, csr_length);
if (ACPI_SUCCESS(status))
return status;
return hp_crs_locate(obj, csr_base, csr_length);
}
EXPORT_SYMBOL(hp_acpi_csr_space);

View File

@ -1606,5 +1606,8 @@ sys_call_table:
data8 sys_ni_syscall // 1295 reserved for ppoll
data8 sys_unshare
data8 sys_splice
data8 sys_set_robust_list
data8 sys_get_robust_list
data8 sys_sync_file_range // 1300
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls

View File

@ -581,10 +581,12 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *regs)
{
unsigned long flags;
int cpu = smp_processor_id();
struct ia64_mca_notify_die nd =
{ .sos = NULL, .monarch_cpu = &monarch_cpu };
/* Mask all interrupts */
local_irq_save(flags);
if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", regs, 0, 0, 0)
if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
@ -594,7 +596,7 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *regs)
*/
ia64_sal_mc_rendez();
if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", regs, 0, 0, 0)
if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
@ -602,7 +604,7 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *regs)
while (monarch_cpu != -1)
cpu_relax(); /* spin until monarch leaves */
if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", regs, 0, 0, 0)
if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
@ -1023,6 +1025,8 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
&sos->proc_state_param;
int recover, cpu = smp_processor_id();
task_t *previous_current;
struct ia64_mca_notify_die nd =
{ .sos = sos, .monarch_cpu = &monarch_cpu };
oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */
console_loglevel = 15; /* make sure printks make it to console */
@ -1031,7 +1035,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA");
monarch_cpu = cpu;
if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, 0, 0, 0)
if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
ia64_wait_for_slaves(cpu);
@ -1043,7 +1047,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
* spinning in SAL does not work.
*/
ia64_mca_wakeup_all();
if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, 0, 0, 0)
if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
@ -1064,7 +1068,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA);
sos->os_status = IA64_MCA_CORRECTED;
}
if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, 0, 0, recover)
if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, (long)&nd, 0, recover)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
@ -1351,10 +1355,14 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
static atomic_t monarchs;
task_t *previous_current;
int cpu = smp_processor_id();
struct ia64_mca_notify_die nd =
{ .sos = sos, .monarch_cpu = &monarch_cpu };
oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */
console_loglevel = 15; /* make sure printks make it to console */
(void) notify_die(DIE_INIT_ENTER, "INIT", regs, (long)&nd, 0, 0);
printk(KERN_INFO "Entered OS INIT handler. PSP=%lx cpu=%d monarch=%ld\n",
sos->proc_state_param, cpu, sos->monarch);
salinfo_log_wakeup(SAL_INFO_TYPE_INIT, NULL, 0, 0);
@ -1390,15 +1398,15 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT;
while (monarch_cpu == -1)
cpu_relax(); /* spin until monarch enters */
if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, 0, 0, 0)
if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, 0, 0, 0)
if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
while (monarch_cpu != -1)
cpu_relax(); /* spin until monarch leaves */
if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, 0, 0, 0)
if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
printk("Slave on cpu %d returning to normal service.\n", cpu);
@ -1409,7 +1417,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
}
monarch_cpu = cpu;
if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, 0, 0, 0)
if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
@ -1426,10 +1434,10 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
* to default_monarch_init_process() above and just print all the
* tasks.
*/
if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, 0, 0, 0)
if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, 0, 0, 0)
if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
printk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu);
@ -1631,6 +1639,7 @@ ia64_mca_init(void)
printk(KERN_INFO "Increasing MCA rendezvous timeout from "
"%ld to %ld milliseconds\n", timeout, isrv.v0);
timeout = isrv.v0;
(void) notify_die(DIE_MCA_NEW_TIMEOUT, "MCA", NULL, timeout, 0, 0);
continue;
}
printk(KERN_ERR "Failed to register rendezvous interrupt "

View File

@ -827,7 +827,7 @@ ia64_state_restore:
ld8 r9=[temp2],16 // sal_gp
;;
ld8 r22=[temp1],16 // pal_min_state, virtual
ld8 r21=[temp2],16 // prev_IA64_KR_CURRENT
ld8 r13=[temp2],16 // prev_IA64_KR_CURRENT
;;
ld8 r16=[temp1],16 // prev_IA64_KR_CURRENT_STACK
ld8 r20=[temp2],16 // prev_task
@ -848,7 +848,7 @@ ia64_state_restore:
mov cr.iim=temp3
mov cr.iha=temp4
dep r22=0,r22,62,1 // pal_min_state, physical, uncached
mov IA64_KR(CURRENT)=r21
mov IA64_KR(CURRENT)=r13
ld8 r8=[temp1] // os_status
ld8 r10=[temp2] // context
@ -856,7 +856,7 @@ ia64_state_restore:
* avoid any dependencies on the algorithm in ia64_switch_to(), just
* purge any existing CURRENT_STACK mapping and insert the new one.
*
* r16 contains prev_IA64_KR_CURRENT_STACK, r21 contains
* r16 contains prev_IA64_KR_CURRENT_STACK, r13 contains
* prev_IA64_KR_CURRENT, these values may have been changed by the C
* code. Do not use r8, r9, r10, r22, they contain values ready for
* the return to SAL.
@ -873,7 +873,7 @@ ia64_state_restore:
;;
srlz.d
extr.u r19=r21,61,3 // r21 = prev_IA64_KR_CURRENT
extr.u r19=r13,61,3 // r13 = prev_IA64_KR_CURRENT
shl r20=r16,IA64_GRANULE_SHIFT // r16 = prev_IA64_KR_CURRENT_STACK
movl r21=PAGE_KERNEL // page properties
;;
@ -883,7 +883,7 @@ ia64_state_restore:
(p6) br.spnt 1f // the dreaded cpu 0 idle task in region 5:(
;;
mov cr.itir=r18
mov cr.ifa=r21
mov cr.ifa=r13
mov r20=IA64_TR_CURRENT_STACK
;;
itr.d dtr[r20]=r21

View File

@ -947,7 +947,7 @@ void
percpu_modcopy (void *pcpudst, const void *src, unsigned long size)
{
unsigned int i;
for_each_cpu(i) {
for_each_possible_cpu(i) {
memcpy(pcpudst + __per_cpu_offset[i], src, size);
}
}

View File

@ -60,6 +60,9 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
struct siginfo si;
unsigned long mask;
/* mmap_sem is performance critical.... */
prefetchw(&mm->mmap_sem);
/*
* If we're in an interrupt or have no user context, we must not take the fault..
*/

View File

@ -1831,7 +1831,7 @@ xpc_initiate_allocate(partid_t partid, int ch_number, u32 flags, void **payload)
{
struct xpc_partition *part = &xpc_partitions[partid];
enum xpc_retval ret = xpcUnknownReason;
struct xpc_msg *msg;
struct xpc_msg *msg = NULL;
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);

View File

@ -285,6 +285,11 @@ config NUMA
depends on SMP && BROKEN
default n
config NODES_SHIFT
int
default "1"
depends on NEED_MULTIPLE_NODES
# turning this on wastes a bunch of space.
# Summit needs it only when NUMA is on
config BOOT_IOREMAP

View File

@ -23,9 +23,6 @@ EXPORT_SYMBOL(boot_cpu_data);
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(enable_irq);
EXPORT_SYMBOL(disable_irq);
EXPORT_SYMBOL(disable_irq_nosync);
EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(__down);
EXPORT_SYMBOL(__down_interruptible);
@ -38,13 +35,6 @@ EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__delay);
EXPORT_SYMBOL(__const_udelay);
EXPORT_SYMBOL(__get_user_1);
EXPORT_SYMBOL(__get_user_2);
EXPORT_SYMBOL(__get_user_4);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strncpy_from_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
@ -59,11 +49,8 @@ extern void *dcache_dummy;
EXPORT_SYMBOL(dcache_dummy);
#endif
EXPORT_SYMBOL(cpu_data);
EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(cpu_callout_map);
/* Global SMP stuff */
EXPORT_SYMBOL(synchronize_irq);
EXPORT_SYMBOL(smp_call_function);
/* TLB flushing */
@ -83,27 +70,11 @@ EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
/* memory and string operations */
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(memcpy);
/* EXPORT_SYMBOL(memcpy_fromio); // not implement yet */
/* EXPORT_SYMBOL(memcpy_toio); // not implement yet */
EXPORT_SYMBOL(memset);
/* EXPORT_SYMBOL(memset_io); // not implement yet */
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memscan);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strncat);
EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(_inb);
EXPORT_SYMBOL(_inw);

View File

@ -9,6 +9,7 @@
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/fs.h>
#include <linux/sched.h>
@ -219,8 +220,6 @@ static unsigned long __init setup_memory(void)
extern unsigned long setup_memory(void);
#endif /* CONFIG_DISCONTIGMEM */
#define M32R_PCC_PCATCR 0x00ef7014 /* will move to m32r.h */
void __init setup_arch(char **cmdline_p)
{
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
@ -269,15 +268,14 @@ void __init setup_arch(char **cmdline_p)
paging_init();
}
static struct cpu cpu[NR_CPUS];
static struct cpu cpu_devices[NR_CPUS];
static int __init topology_init(void)
{
int cpu_id;
int i;
for (cpu_id = 0; cpu_id < NR_CPUS; cpu_id++)
if (cpu_possible(cpu_id))
register_cpu(&cpu[cpu_id], cpu_id, NULL);
for_each_present_cpu(i)
register_cpu(&cpu_devices[i], i, NULL);
return 0;
}

View File

@ -39,8 +39,10 @@
* Martin J. Bligh : Added support for multi-quad systems
*/
#include <linux/module.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp_lock.h>
#include <linux/irq.h>
@ -72,11 +74,15 @@ physid_mask_t phys_cpu_present_map;
/* Bitmask of currently online CPUs */
cpumask_t cpu_online_map;
EXPORT_SYMBOL(cpu_online_map);
cpumask_t cpu_bootout_map;
cpumask_t cpu_bootin_map;
cpumask_t cpu_callout_map;
static cpumask_t cpu_callin_map;
cpumask_t cpu_callout_map;
EXPORT_SYMBOL(cpu_callout_map);
cpumask_t cpu_possible_map = CPU_MASK_ALL;
EXPORT_SYMBOL(cpu_possible_map);
/* Per CPU bogomips and other parameters */
struct cpuinfo_m32r cpu_data[NR_CPUS] __cacheline_aligned;
@ -110,7 +116,6 @@ static unsigned int calibration_result;
void smp_prepare_boot_cpu(void);
void smp_prepare_cpus(unsigned int);
static void smp_tune_scheduling(void);
static void init_ipi_lock(void);
static void do_boot_cpu(int);
int __cpu_up(unsigned int);
@ -177,6 +182,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
}
for (phys_id = 0 ; phys_id < nr_cpu ; phys_id++)
physid_set(phys_id, phys_cpu_present_map);
#ifndef CONFIG_HOTPLUG_CPU
cpu_present_map = cpu_possible_map;
#endif
show_mp_info(nr_cpu);
@ -186,7 +194,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
* Setup boot CPU information
*/
smp_store_cpu_info(0); /* Final full version of the data */
smp_tune_scheduling();
/*
* If SMP should be disabled, then really disable it!
@ -230,11 +237,6 @@ smp_done:
Dprintk("Boot done.\n");
}
static void __init smp_tune_scheduling(void)
{
/* Nothing to do. */
}
/*
* init_ipi_lock : Initialize IPI locks.
*/
@ -629,4 +631,3 @@ static void __init unmap_cpu_to_physid(int cpu_id, int phys_id)
physid_2_cpu[phys_id] = -1;
cpu_2_physid[cpu_id] = -1;
}

View File

@ -2,6 +2,6 @@
# Makefile for M32R-specific library files..
#
lib-y := checksum.o ashxdi3.o memset.o memcpy.o getuser.o \
putuser.o delay.o strlen.o usercopy.o csum_partial_copy.o
lib-y := checksum.o ashxdi3.o memset.o memcpy.o \
delay.o strlen.o usercopy.o csum_partial_copy.o

View File

@ -1,88 +0,0 @@
/*
* __get_user functions.
*
* (C) Copyright 2001 Hirokazu Takata
*
* These functions have a non-standard call interface
* to make them more efficient, especially as they
* return an error value in addition to the "real"
* return value.
*/
#include <linux/config.h>
/*
* __get_user_X
*
* Inputs: r0 contains the address
*
* Outputs: r0 is error code (0 or -EFAULT)
* r1 contains zero-extended value
*
* These functions should not modify any other registers,
* as they get called from within inline assembly.
*/
#ifdef CONFIG_ISA_DUAL_ISSUE
.text
.balign 4
.globl __get_user_1
__get_user_1:
1: ldub r1, @r0 || ldi r0, #0
jmp r14
.balign 4
.globl __get_user_2
__get_user_2:
2: lduh r1, @r0 || ldi r0, #0
jmp r14
.balign 4
.globl __get_user_4
__get_user_4:
3: ld r1, @r0 || ldi r0, #0
jmp r14
bad_get_user:
ldi r1, #0 || ldi r0, #-14
jmp r14
#else /* not CONFIG_ISA_DUAL_ISSUE */
.text
.balign 4
.globl __get_user_1
__get_user_1:
1: ldub r1, @r0
ldi r0, #0
jmp r14
.balign 4
.globl __get_user_2
__get_user_2:
2: lduh r1, @r0
ldi r0, #0
jmp r14
.balign 4
.globl __get_user_4
__get_user_4:
3: ld r1, @r0
ldi r0, #0
jmp r14
bad_get_user:
ldi r1, #0
ldi r0, #-14
jmp r14
#endif /* not CONFIG_ISA_DUAL_ISSUE */
.section __ex_table,"a"
.long 1b,bad_get_user
.long 2b,bad_get_user
.long 3b,bad_get_user
.previous
.end

View File

@ -1,84 +0,0 @@
/*
* __put_user functions.
*
* (C) Copyright 1998 Linus Torvalds
* (C) Copyright 2001 Hirokazu Takata
*
* These functions have a non-standard call interface
* to make them more efficient.
*/
#include <linux/config.h>
/*
* __put_user_X
*
* Inputs: r0 contains the address
* r1 contains the value
*
* Outputs: r0 is error code (0 or -EFAULT)
* r1 is corrupted (will contain "current_task").
*
* These functions should not modify any other registers,
* as they get called from within inline assembly.
*/
#ifdef CONFIG_ISA_DUAL_ISSUE
.text
.balign 4
.globl __put_user_1
__put_user_1:
1: stb r1, @r0 || ldi r0, #0
jmp r14
.balign 4
.globl __put_user_2
__put_user_2:
2: sth r1, @r0 || ldi r0, #0
jmp r14
.balign 4
.globl __put_user_4
__put_user_4:
3: st r1, @r0 || ldi r0, #0
jmp r14
bad_put_user:
ldi r0, #-14 || jmp r14
#else /* not CONFIG_ISA_DUAL_ISSUE */
.text
.balign 4
.globl __put_user_1
__put_user_1:
1: stb r1, @r0
ldi r0, #0
jmp r14
.balign 4
.globl __put_user_2
__put_user_2:
2: sth r1, @r0
ldi r0, #0
jmp r14
.balign 4
.globl __put_user_4
__put_user_4:
3: st r1, @r0
ldi r0, #0
jmp r14
bad_put_user:
ldi r0, #-14
jmp r14
#endif /* not CONFIG_ISA_DUAL_ISSUE */
.section __ex_table,"a"
.long 1b,bad_put_user
.long 2b,bad_put_user
.long 3b,bad_put_user
.previous

View File

@ -57,7 +57,6 @@ EXPORT_SYMBOL(dump_thread);
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(enable_irq);
EXPORT_SYMBOL(disable_irq);
EXPORT_SYMBOL(kernel_thread);

View File

@ -26,7 +26,6 @@ EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strchr);

View File

@ -1590,6 +1590,11 @@ config ARCH_FLATMEM_ENABLE
def_bool y
depends on !NUMA
config NODES_SHIFT
int
default "6"
depends on NEED_MULTIPLE_NODES
source "mm/Kconfig"
config SMP

View File

@ -39,7 +39,6 @@ EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strncmp);
#endif
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strncat);
EXPORT_SYMBOL(strnlen);
EXPORT_SYMBOL(strrchr);

View File

@ -177,6 +177,11 @@ config ARCH_DISCONTIGMEM_DEFAULT
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
config NODES_SHIFT
int
default "3"
depends on NEED_MULTIPLE_NODES
source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
source "mm/Kconfig"

View File

@ -31,7 +31,6 @@
#include <linux/string.h>
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(strpbrk);
#include <asm/atomic.h>
EXPORT_SYMBOL(__xchg8);

View File

@ -649,6 +649,11 @@ config NUMA
depends on PPC64
default y if SMP && PPC_PSERIES
config NODES_SHIFT
int
default "4"
depends on NEED_MULTIPLE_NODES
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on PPC64

View File

@ -3,7 +3,7 @@
#
CFLAGS_kbd.o := -Idrivers/char
CFLAGS_vreset.o := -I$(srctree)/arch/ppc/boot/include
CFLAGS_vreset.o := -Iarch/ppc/boot/include
zlib := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c

View File

@ -67,7 +67,6 @@ cflags-$(CONFIG_WARN_STACK) += -mwarn-framesize=$(CONFIG_WARN_STACK_SIZE)
endif
CFLAGS += -mbackchain -msoft-float $(cflags-y)
CFLAGS += $(call cc-option,-finline-limit=10000)
CFLAGS += -pipe -fno-strength-reduce -Wno-sign-compare
AFLAGS += $(aflags-y)

View File

@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc2
# Wed Feb 8 10:44:39 2006
# Linux kernel version: 2.6.17-rc1
# Mon Apr 3 14:34:15 2006
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_S390=y
@ -30,8 +31,8 @@ CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
@ -45,10 +46,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@ -60,7 +57,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@ -69,7 +65,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@ -91,17 +87,20 @@ CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
#
# CONFIG_64BIT is not set
CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_HOTPLUG_CPU=y
CONFIG_MATHEMU=y
CONFIG_DEFAULT_MIGRATION_COST=1000000
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_BINFMT_ELF32=y
#
# Code generation options
#
CONFIG_MARCH_G5=y
# CONFIG_MARCH_Z900 is not set
# CONFIG_MARCH_G5 is not set
CONFIG_MARCH_Z900=y
# CONFIG_MARCH_Z990 is not set
CONFIG_PACK_STACK=y
# CONFIG_SMALL_STACK is not set
@ -143,7 +142,7 @@ CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_APPLDATA_BASE is not set
CONFIG_NO_IDLE_HZ=y
CONFIG_NO_IDLE_HZ_INIT=y
# CONFIG_KEXEC is not set
CONFIG_KEXEC=y
#
# Networking
@ -173,6 +172,7 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
@ -180,9 +180,11 @@ CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
@ -275,6 +277,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# SCSI device support
#
@ -340,8 +347,7 @@ CONFIG_DASD_PROFILE=y
CONFIG_DASD_ECKD=y
CONFIG_DASD_FBA=y
CONFIG_DASD_DIAG=y
CONFIG_DASD_EER=m
# CONFIG_DASD_CMB is not set
CONFIG_DASD_EER=y
# CONFIG_ATA_OVER_ETH is not set
#
@ -354,6 +360,7 @@ CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=m
# CONFIG_MD_RAID5_RESHAPE is not set
# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
@ -404,6 +411,7 @@ CONFIG_S390_TAPE_BLOCK=y
# S/390 tape hardware support
#
CONFIG_S390_TAPE_34XX=m
# CONFIG_S390_TAPE_3590 is not set
# CONFIG_VMLOGRDR is not set
# CONFIG_VMCP is not set
# CONFIG_MONREADER is not set
@ -529,7 +537,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@ -619,14 +626,15 @@ CONFIG_LOG_BUF_SHIFT=17
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set

View File

@ -527,6 +527,11 @@ config CPU_HAS_SR_RB
See <file:Documentation/sh/register-banks.txt> for further
information on SR.RB and register banking in the kernel in general.
config NODES_SHIFT
int
default "1"
depends on NEED_MULTIPLE_NODES
endmenu
menu "Boot options"

View File

@ -37,7 +37,6 @@ EXPORT_SYMBOL(disable_irq_nosync);
EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(no_irq_type);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strnlen);

View File

@ -41,7 +41,6 @@ EXPORT_SYMBOL(kernel_thread);
/* Networking helper routines. */
EXPORT_SYMBOL(csum_partial_copy);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strstr);
#ifdef CONFIG_VT

View File

@ -244,7 +244,7 @@ int setup_profiling_timer(unsigned int multiplier)
return -EINVAL;
spin_lock_irqsave(&prof_setup_lock, flags);
for_each_cpu(i) {
for_each_possible_cpu(i) {
load_profile_irq(i, lvl14_resolution / multiplier);
prof_multiplier(i) = multiplier;
}

View File

@ -263,7 +263,6 @@ EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strrchr);
EXPORT_SYMBOL(strpbrk);
EXPORT_SYMBOL(strstr);
EXPORT_SYMBOL(page_kernel);

View File

@ -5,4 +5,4 @@
obj-y := math.o
EXTRA_AFLAGS := -ansi
EXTRA_CFLAGS = -I. -I$(TOPDIR)/include/math-emu -w
EXTRA_CFLAGS = -I. -Iinclude/math-emu -w

View File

@ -194,6 +194,9 @@ endchoice
endmenu
config ARCH_SELECT_MEMORY_MODEL
def_bool y
config ARCH_SPARSEMEM_ENABLE
def_bool y

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16
# Fri Mar 31 01:40:57 2006
# Sun Apr 2 19:31:04 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
@ -838,7 +838,6 @@ CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
@ -924,6 +923,7 @@ CONFIG_SND_MTPAV=m
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@ -955,6 +955,7 @@ CONFIG_SND_ALI5451=m
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
@ -1108,6 +1109,11 @@ CONFIG_USB_HIDDEV=y
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# InfiniBand support
#

View File

@ -1092,7 +1092,7 @@ void sun4v_pci_init(int node, char *model_name)
}
}
for_each_cpu(i) {
for_each_possible_cpu(i) {
unsigned long page = get_zeroed_page(GFP_ATOMIC);
if (!page)

View File

@ -244,6 +244,13 @@ asmlinkage void do_ptrace(struct pt_regs *regs)
}
switch(request) {
case PTRACE_PEEKUSR:
if (addr != 0)
pt_error_return(regs, EIO);
else
pt_succ_return(regs, 0);
goto out_tsk;
case PTRACE_PEEKTEXT: /* read word at location addr. */
case PTRACE_PEEKDATA: {
unsigned long tmp64;
@ -602,6 +609,22 @@ asmlinkage void do_ptrace(struct pt_regs *regs)
/* PTRACE_DUMPCORE unsupported... */
case PTRACE_GETEVENTMSG: {
int err;
if (test_thread_flag(TIF_32BIT))
err = put_user(child->ptrace_message,
(unsigned int __user *) data);
else
err = put_user(child->ptrace_message,
(unsigned long __user *) data);
if (err)
pt_error_return(regs, -err);
else
pt_succ_return(regs, 0);
break;
}
default: {
int err = ptrace_request(child, request, addr, data);
if (err)

View File

@ -535,7 +535,7 @@ static int __init topology_init(void)
while (!cpu_find_by_instance(ncpus_probed, NULL, NULL))
ncpus_probed++;
for_each_cpu(i) {
for_each_possible_cpu(i) {
struct cpu *p = kzalloc(sizeof(*p), GFP_KERNEL);
if (p) {
register_cpu(p, i, NULL);

View File

@ -745,12 +745,21 @@ struct call_data_struct {
int wait;
};
static DEFINE_SPINLOCK(call_lock);
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
static struct call_data_struct *call_data;
extern unsigned long xcall_call_function;
/*
/**
* smp_call_function(): Run a function on all other CPUs.
* @func: The function to run. This must be fast and non-blocking.
* @info: An arbitrary pointer to pass to the function.
* @nonatomic: currently unused.
* @wait: If true, wait (atomically) until function has completed on other CPUs.
*
* Returns 0 on success, else a negative status code. Does not return until
* remote CPUs are nearly ready to execute <<func>> or are or have executed.
*
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler.
*/
@ -759,7 +768,6 @@ static int smp_call_function_mask(void (*func)(void *info), void *info,
{
struct call_data_struct data;
int cpus;
long timeout;
/* Can deadlock when called with interrupts disabled */
WARN_ON(irqs_disabled());
@ -777,31 +785,18 @@ static int smp_call_function_mask(void (*func)(void *info), void *info,
goto out_unlock;
call_data = &data;
mb();
smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask);
/*
* Wait for other cpus to complete function or at
* least snap the call data.
*/
timeout = 1000000;
while (atomic_read(&data.finished) != cpus) {
if (--timeout <= 0)
goto out_timeout;
barrier();
udelay(1);
}
/* Wait for response */
while (atomic_read(&data.finished) != cpus)
cpu_relax();
out_unlock:
spin_unlock(&call_lock);
return 0;
out_timeout:
spin_unlock(&call_lock);
printk("XCALL: Remote cpus not responding, ncpus=%d finished=%d\n",
cpus, atomic_read(&data.finished));
return 0;
}
int smp_call_function(void (*func)(void *info), void *info,
@ -1285,7 +1280,7 @@ int setup_profiling_timer(unsigned int multiplier)
return -EINVAL;
spin_lock_irqsave(&prof_setup_lock, flags);
for_each_cpu(i)
for_each_possible_cpu(i)
prof_multiplier(i) = multiplier;
current_tick_offset = (timer_tick_offset / multiplier);
spin_unlock_irqrestore(&prof_setup_lock, flags);
@ -1313,12 +1308,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
}
}
for_each_cpu(i) {
for_each_possible_cpu(i) {
if (tlb_type == hypervisor) {
int j;
/* XXX get this mapping from machine description */
for_each_cpu(j) {
for_each_possible_cpu(j) {
if ((j >> 2) == (i >> 2))
cpu_set(j, cpu_sibling_map[i]);
}

View File

@ -276,7 +276,6 @@ EXPORT_SYMBOL(__prom_getsibling);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(__strlen_user);
EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(strpbrk);
#ifdef CONFIG_SOLARIS_EMUL_MODULE
EXPORT_SYMBOL(linux_sparc_syscall);

View File

@ -1130,9 +1130,9 @@ static void cheetah_log_errors(struct pt_regs *regs, struct cheetah_err_info *in
(recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id(),
afsr, afar,
(afsr & CHAFSR_TL1) ? 1 : 0);
printk("%s" "ERROR(%d): TPC[%016lx] TNPC[%016lx] TSTATE[%016lx]\n",
printk("%s" "ERROR(%d): TPC[%lx] TNPC[%lx] O7[%lx] TSTATE[%lx]\n",
(recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id(),
regs->tpc, regs->tnpc, regs->tstate);
regs->tpc, regs->tnpc, regs->u_regs[UREG_I7], regs->tstate);
printk("%s" "ERROR(%d): M_SYND(%lx), E_SYND(%lx)%s%s\n",
(recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id(),
(afsr & CHAFSR_M_SYNDROME) >> CHAFSR_M_SYNDROME_SHIFT,

View File

@ -159,6 +159,7 @@ archclean:
$(SYMLINK_HEADERS):
@echo ' SYMLINK $@'
ifneq ($(KBUILD_SRC),)
$(Q)mkdir -p $(objtree)/include/asm-um
$(Q)ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
else
$(Q)cd $(TOPDIR)/$(dir $@) ; \
@ -168,7 +169,7 @@ endif
include/asm-um/arch:
@echo ' SYMLINK $@'
ifneq ($(KBUILD_SRC),)
$(Q)mkdir -p include/asm-um
$(Q)mkdir -p $(objtree)/include/asm-um
$(Q)ln -fsn $(srctree)/include/asm-$(SUBARCH) include/asm-um/arch
else
$(Q)cd $(TOPDIR)/include/asm-um && ln -sf ../asm-$(SUBARCH) arch

Some files were not shown because too many files have changed in this diff Show More