[SCSI] qla2xxx: Code cleanup to remove unwanted comments and code.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This commit is contained in:
Giridhar Malavali 2010-12-21 16:00:20 -08:00 committed by James Bottomley
parent c9e8fd5cfb
commit 10fbb7dd36
2 changed files with 0 additions and 38 deletions

View File

@ -1253,25 +1253,6 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
return 0;
}
static int
qla82xx_check_for_bad_spd(struct qla_hw_data *ha)
{
u32 val = 0;
val = qla82xx_rd_32(ha, BOOT_LOADER_DIMM_STATUS);
val &= QLA82XX_BOOT_LOADER_MN_ISSUE;
if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) {
qla_printk(KERN_INFO, ha,
"Memory DIMM SPD not programmed. "
" Assumed valid.\n");
return 1;
} else if (val) {
qla_printk(KERN_INFO, ha,
"Memory DIMM type incorrect.Info:%08X.\n", val);
return 2;
}
return 0;
}
static int
qla82xx_pci_mem_write_2M(struct qla_hw_data *ha,
u64 off, void *data, int size)
@ -1337,11 +1318,6 @@ qla82xx_pci_mem_write_2M(struct qla_hw_data *ha,
word[startword+1] |= tmpw >> (sz[0] * 8);
}
/*
* don't lock here - write_wx gets the lock if each time
* write_lock_irqsave(&adapter->adapter_lock, flags);
* netxen_nic_pci_change_crbwindow_128M(adapter, 0);
*/
for (i = 0; i < loop; i++) {
temp = off8 + (i << shift_amount);
qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp);
@ -1443,12 +1419,6 @@ qla82xx_pci_mem_read_2M(struct qla_hw_data *ha,
off0[1] = 0;
sz[1] = size - sz[0];
/*
* don't lock here - write_wx gets the lock if each time
* write_lock_irqsave(&adapter->adapter_lock, flags);
* netxen_nic_pci_change_crbwindow_128M(adapter, 0);
*/
for (i = 0; i < loop; i++) {
temp = off8 + (i << shift_amount);
qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp);
@ -1481,11 +1451,6 @@ qla82xx_pci_mem_read_2M(struct qla_hw_data *ha,
}
}
/*
* netxen_nic_pci_change_crbwindow_128M(adapter, 1);
* write_unlock_irqrestore(&adapter->adapter_lock, flags);
*/
if (j >= MAX_CTL_CHECK)
return -1;
@ -1916,7 +1881,6 @@ qla82xx_check_cmdpeg_state(struct qla_hw_data *ha)
qla_printk(KERN_INFO, ha,
"Cmd Peg initialization failed: 0x%x.\n", val);
qla82xx_check_for_bad_spd(ha);
val = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_PEGTUNE_DONE);
read_lock(&ha->hw_lock);
qla82xx_wr_32(ha, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED);

View File

@ -523,8 +523,6 @@
# define QLA82XX_CAM_RAM_BASE (QLA82XX_CRB_CAM + 0x02000)
# define QLA82XX_CAM_RAM(reg) (QLA82XX_CAM_RAM_BASE + (reg))
#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED 0x80000000
#define QLA82XX_BOOT_LOADER_MN_ISSUE 0xff00ffff
#define QLA82XX_PORT_MODE_ADDR (QLA82XX_CAM_RAM(0x24))
#define QLA82XX_PEG_HALT_STATUS1 (QLA82XX_CAM_RAM(0xa8))
#define QLA82XX_PEG_HALT_STATUS2 (QLA82XX_CAM_RAM(0xac))