SERIAL: 8250: Remove SERIAL_8250_AU1X00

Remove the SERIAL_8250_AU1X00 config symbol.  Instead, use the MIPS_ALCHEMY
one which is always defined when building an Au1x00-based platform.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Linux-serial <linux-serial@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/1461/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This one depends on a previous patch (which removes SOC_AU1X00 and changes
MACH_ALCHEMY) to apply cleanly (and then actually work), so I'd love for
this to go in via the mips tree.
This commit is contained in:
Manuel Lauss 2010-07-15 21:45:05 +02:00 committed by Ralf Baechle
parent 42a4f17dc3
commit 12bf3f24e0
3 changed files with 3 additions and 20 deletions

View File

@ -33,7 +33,6 @@
}
static struct plat_serial8250_port au1x00_uart_data[] = {
#if defined(CONFIG_SERIAL_8250_AU1X00)
#if defined(CONFIG_SOC_AU1000)
PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
@ -54,7 +53,6 @@ static struct plat_serial8250_port au1x00_uart_data[] = {
PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
#endif
#endif /* CONFIG_SERIAL_8250_AU1X00 */
{ },
};

View File

@ -302,7 +302,7 @@ static const struct serial8250_config uart_config[] = {
},
};
#if defined (CONFIG_SERIAL_8250_AU1X00)
#if defined(CONFIG_MIPS_ALCHEMY)
/* Au1x00 UART hardware has a weird register layout */
static const u8 au_io_in_map[] = {
@ -422,7 +422,6 @@ static unsigned int mem32_serial_in(struct uart_port *p, int offset)
return readl(p->membase + offset);
}
#ifdef CONFIG_SERIAL_8250_AU1X00
static unsigned int au_serial_in(struct uart_port *p, int offset)
{
offset = map_8250_in_reg(p, offset) << p->regshift;
@ -434,7 +433,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value)
offset = map_8250_out_reg(p, offset) << p->regshift;
__raw_writel(value, p->membase + offset);
}
#endif
static unsigned int tsi_serial_in(struct uart_port *p, int offset)
{
@ -503,12 +501,11 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = mem32_serial_out;
break;
#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
p->serial_in = au_serial_in;
p->serial_out = au_serial_out;
break;
#endif
case UPIO_TSI:
p->serial_in = tsi_serial_in;
p->serial_out = tsi_serial_out;
@ -535,9 +532,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
switch (p->iotype) {
case UPIO_MEM:
case UPIO_MEM32:
#ifdef CONFIG_SERIAL_8250_AU1X00
case UPIO_AU:
#endif
case UPIO_DWAPB:
p->serial_out(p, offset, value);
p->serial_in(p, UART_LCR); /* safe, no side-effects */
@ -573,7 +568,7 @@ static inline void _serial_dl_write(struct uart_8250_port *up, int value)
serial_outp(up, UART_DLM, value >> 8 & 0xff);
}
#if defined(CONFIG_SERIAL_8250_AU1X00)
#if defined(CONFIG_MIPS_ALCHEMY)
/* Au1x00 haven't got a standard divisor latch */
static int serial_dl_read(struct uart_8250_port *up)
{
@ -2596,11 +2591,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
#ifdef CONFIG_SERIAL_8250_AU1X00
/* if access method is AU, it is a 16550 with a quirk */
if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
up->bugs |= UART_BUG_NOMSR;
#endif
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
autoconfig_irq(up);

View File

@ -258,14 +258,6 @@ config SERIAL_8250_ACORN
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
config SERIAL_8250_AU1X00
bool "Au1x00 serial port support"
depends on SERIAL_8250 != n && MIPS_ALCHEMY
help
If you have an Au1x00 SOC based board and want to use the serial port,
say Y to this option. The driver can handle up to 4 serial ports,
depending on the SOC. If unsure, say N.
config SERIAL_8250_RM9K
bool "Support for MIPS RM9xxx integrated serial port"
depends on SERIAL_8250 != n && SERIAL_RM9000