Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the array
  [ARM] 5445/1: AT91: Remove flexible array from USBH platform data
  [ARM] 5447/1: Add SZ_32K
  [ARM] omap: fix omap1 clock usecount decrement bug
  [ARM] pxa: register AC97 controller devices
  [ARM] pxa/csb701: do not register devices on non-csb726 boads
  [ARM] pxa/colibri: get rid of set_irq_type()
  [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL
  [ARM] pxa/cm-x2xx: fix ucb1400 not being registered
  [ARM] pxa: Add support for suspend on PalmTX, T5 and LD
  [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight
  [ARM] pxa: Palm Tungsten E2 basic support
  [ARM] pxa/em-x270: add libertas device registration
  [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power
This commit is contained in:
Linus Torvalds 2009-04-08 15:24:09 -07:00
commit 139ef17a46
31 changed files with 865 additions and 96 deletions

View File

@ -636,7 +636,7 @@ P: Dirk Opfer
M: dirk@opfer-online.de
S: Maintained
ARM/PALMTX,PALMT5,PALMLD SUPPORT
ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
P: Marek Vasut
M: marek.vasut@gmail.com
W: http://hackndev.com

View File

@ -1183,7 +1183,11 @@ CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_SA1100=y
# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
# CONFIG_REGULATOR is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_BQ24022=y
# CONFIG_UIO is not set
# CONFIG_STAGING is not set

View File

@ -32,6 +32,7 @@
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
#define SZ_16K 0x00004000
#define SZ_32K 0x00008000
#define SZ_64K 0x00010000
#define SZ_128K 0x00020000
#define SZ_256K 0x00040000

View File

@ -87,7 +87,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data);
/* USB Host */
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
u8 vbus_pin[]; /* port power-control pin */
u8 vbus_pin[2]; /* port power-control pin */
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);

View File

@ -590,27 +590,28 @@ static void omap1_init_ext_clk(struct clk * clk)
static int omap1_clk_enable(struct clk *clk)
{
int ret = 0;
if (clk->usecount++ == 0) {
if (likely(clk->parent)) {
ret = omap1_clk_enable(clk->parent);
if (unlikely(ret != 0)) {
clk->usecount--;
return ret;
}
if (clk->usecount++ == 0) {
if (clk->parent) {
ret = omap1_clk_enable(clk->parent);
if (ret)
goto err;
if (clk->flags & CLOCK_NO_IDLE_PARENT)
omap1_clk_deny_idle(clk->parent);
}
ret = clk->ops->enable(clk);
if (unlikely(ret != 0) && clk->parent) {
omap1_clk_disable(clk->parent);
clk->usecount--;
if (ret) {
if (clk->parent)
omap1_clk_disable(clk->parent);
goto err;
}
}
return ret;
err:
clk->usecount--;
return ret;
}

View File

@ -343,6 +343,15 @@ config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
select HAVE_PWM
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y

View File

@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_E740) += e740.o
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o

View File

@ -121,7 +121,7 @@ static inline void cmx2xx_init_dm9000(void) {}
/* UCB1400 touchscreen controller */
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static struct platform_device cmx2xx_ts_device = {
.name = "ucb1400_ts",
.name = "ucb1400_core",
.id = -1,
};

View File

@ -15,7 +15,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <net/ax88796.h>
#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
@ -32,12 +32,13 @@
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
/*
* Asix AX88796 Ethernet
*/
static struct ax_plat_data colibri_asix_platdata = {
.flags = AXFLG_MAC_FROMDEV,
.wordlength = 2
.flags = 0, /* defined later */
.wordlength = 2,
};
static struct resource colibri_asix_resource[] = {
@ -49,7 +50,7 @@ static struct resource colibri_asix_resource[] = {
[1] = {
.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@ -70,8 +71,8 @@ static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
static void __init colibri_pxa300_init_eth(void)
{
colibri_pxa3xx_init_eth(&colibri_asix_platdata);
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
platform_device_register(&asix_device);
}
#else

View File

@ -15,7 +15,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <net/ax88796.h>
#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
@ -38,8 +38,8 @@
* Asix AX88796 Ethernet
*/
static struct ax_plat_data colibri_asix_platdata = {
.flags = AXFLG_MAC_FROMDEV,
.wordlength = 2
.flags = 0, /* defined later */
.wordlength = 2,
};
static struct resource colibri_asix_resource[] = {
@ -51,7 +51,7 @@ static struct resource colibri_asix_resource[] = {
[1] = {
.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@ -72,8 +72,8 @@ static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
static void __init colibri_pxa320_init_eth(void)
{
colibri_pxa3xx_init_eth(&colibri_asix_platdata);
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
platform_device_register(&asix_device);
}
#else

View File

@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/etherdevice.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
@ -28,6 +29,40 @@
#include "generic.h"
#include "devices.h"
#if defined(CONFIG_AX88796)
#define ETHER_ADDR_LEN 6
static u8 ether_mac_addr[ETHER_ADDR_LEN];
void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
{
int i;
u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
/*
* If the bootloader passed in a serial boot tag, which contains a
* valid ethernet MAC, pass it to the interface. Toradex ships the
* modules with their own bootloader which provides a valid MAC
* this way.
*/
for (i = 0; i < ETHER_ADDR_LEN; i++) {
ether_mac_addr[i] = serial & 0xff;
serial >>= 8;
}
if (is_valid_ether_addr(ether_mac_addr)) {
plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
plat_data->mac_addr = ether_mac_addr;
printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
__func__);
} else {
plat_data->flags |= AXFLG_MAC_FROMDEV;
printk(KERN_INFO "%s(): no valid serial boot tag found, "
"taking MAC from device\n", __func__);
}
}
#endif
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static int mmc_detect_pin;

View File

@ -5,6 +5,8 @@
#include <linux/input.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
static struct gpio_keys_button csb701_buttons[] = {
{
.code = 0x7,
@ -54,6 +56,9 @@ static struct platform_device *devices[] __initdata = {
static int __init csb701_init(void)
{
if (!machine_is_csb726())
return -ENODEV;
return platform_add_devices(devices, ARRAY_SIZE(devices));
}

View File

@ -29,6 +29,7 @@
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
@ -197,6 +198,7 @@ static void __init e740_init(void)
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}

View File

@ -28,6 +28,7 @@
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
@ -198,6 +199,7 @@ static void __init e750_init(void)
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}

View File

@ -27,6 +27,7 @@
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irqs.h>
#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
@ -199,6 +200,7 @@ static void __init e800_init(void)
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e800_udc_mach_info);
pxa_set_ac97_info(NULL);
}
MACHINE_START(E800, "Toshiba e800")

View File

@ -25,8 +25,10 @@
#include <linux/regulator/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
#include <linux/spi/libertas_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
#include <linux/delay.h>
#include <media/soc_camera.h>
@ -62,6 +64,8 @@
#define GPIO93_CAM_RESET (93)
#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
#define GPIO115_WLAN_PWEN (115)
#define GPIO19_WLAN_STRAP (19)
static int mmc_cd;
static int nand_rb;
@ -159,8 +163,8 @@ static unsigned long common_pin_config[] = {
GPIO57_SSP1_TXD,
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
GPIO14_GPIO,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
@ -648,20 +652,86 @@ static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
.model = TDO35S,
};
static struct pxa2xx_spi_master em_x270_spi_2_info = {
.num_chipselect = 1,
.enable_dma = 1,
};
static struct pxa2xx_spi_chip em_x270_libertas_chip = {
.rx_threshold = 1,
.tx_threshold = 1,
.timeout = 1000,
};
static unsigned long em_x270_libertas_pin_config[] = {
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_GPIO,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
};
static int em_x270_libertas_setup(struct spi_device *spi)
{
int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
if (err)
return err;
gpio_direction_output(GPIO19_WLAN_STRAP, 1);
mdelay(100);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
gpio_direction_output(GPIO115_WLAN_PWEN, 0);
mdelay(100);
gpio_set_value(GPIO115_WLAN_PWEN, 1);
mdelay(100);
spi->bits_per_word = 16;
spi_setup(spi);
return 0;
}
static int em_x270_libertas_teardown(struct spi_device *spi)
{
gpio_set_value(GPIO115_WLAN_PWEN, 0);
gpio_free(GPIO115_WLAN_PWEN);
return 0;
}
struct libertas_spi_platform_data em_x270_libertas_pdata = {
.use_dummy_writes = 1,
.gpio_cs = 14,
.setup = em_x270_libertas_setup,
.teardown = em_x270_libertas_teardown,
};
static struct spi_board_info em_x270_spi_devices[] __initdata = {
{
.modalias = "tdo24m",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 0,
.controller_data = &em_x270_tdo24m_chip,
.platform_data = &em_x270_tdo24m_pdata,
.modalias = "tdo24m",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 0,
.controller_data = &em_x270_tdo24m_chip,
.platform_data = &em_x270_tdo24m_pdata,
},
{
.modalias = "libertas_spi",
.max_speed_hz = 13000000,
.bus_num = 2,
.irq = IRQ_GPIO(116),
.chip_select = 0,
.controller_data = &em_x270_libertas_chip,
.platform_data = &em_x270_libertas_pdata,
},
};
static void __init em_x270_init_spi(void)
{
pxa2xx_set_spi_info(1, &em_x270_spi_info);
pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
}
#else

View File

@ -1,5 +1,8 @@
#ifndef _COLIBRI_H_
#define _COLIBRI_H_
#include <net/ax88796.h>
/*
* common settings for all modules
*/
@ -16,6 +19,10 @@ extern void colibri_pxa3xx_init_lcd(int bl_pin);
static inline void colibri_pxa3xx_init_lcd(int) {}
#endif
#if defined(CONFIG_AX88796)
extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
#endif
/* physical memory regions */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */

View File

@ -27,7 +27,7 @@
#define GPIO22_MAGICIAN_VIBRA_EN 22
#define GPIO26_MAGICIAN_GSM_POWER 26
#define GPIO27_MAGICIAN_USBC_PUEN 27
#define GPIO30_MAGICIAN_nCHARGE_EN 30
#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30
#define GPIO37_MAGICIAN_KEY_HANGUP 37
#define GPIO38_MAGICIAN_KEY_CONTACTS 38
#define GPIO40_MAGICIAN_GSM_OUT2 40
@ -98,7 +98,7 @@
#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5)
#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
/* input */

View File

@ -87,6 +87,7 @@
#define PALMLD_IDE_SIZE 0x00100000
#define PALMLD_PHYS_IO_START 0x40000000
#define PALMLD_STR_BASE 0xa0200000
/* BATTERY */
#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */

View File

@ -59,6 +59,7 @@
/* Various addresses */
#define PALMT5_PHYS_RAM_START 0xa0000000
#define PALMT5_PHYS_IO_START 0x40000000
#define PALMT5_STR_BASE 0xa0200000
/* TOUCHSCREEN */
#define AC97_LINK_FRAME 21

View File

@ -0,0 +1,68 @@
/*
* GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
*
* Author:
* Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _INCLUDE_PALMTE2_H_
#define _INCLUDE_PALMTE2_H_
/** HERE ARE GPIOs **/
/* GPIOs */
#define GPIO_NR_PALMTE2_POWER_DETECT 9
#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4
#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15
/* SD/MMC */
#define GPIO_NR_PALMTE2_SD_DETECT_N 10
#define GPIO_NR_PALMTE2_SD_POWER 55
#define GPIO_NR_PALMTE2_SD_READONLY 51
/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
#define GPIO_NR_PALMTE2_IR_DISABLE 48
/* USB */
#define GPIO_NR_PALMTE2_USB_DETECT_N 35
#define GPIO_NR_PALMTE2_USB_PULLUP 53
/* LCD/BACKLIGHT */
#define GPIO_NR_PALMTE2_BL_POWER 56
#define GPIO_NR_PALMTE2_LCD_POWER 37
/* KEYS */
#define GPIO_NR_PALMTE2_KEY_NOTES 5
#define GPIO_NR_PALMTE2_KEY_TASKS 7
#define GPIO_NR_PALMTE2_KEY_CALENDAR 11
#define GPIO_NR_PALMTE2_KEY_CONTACTS 13
#define GPIO_NR_PALMTE2_KEY_CENTER 14
#define GPIO_NR_PALMTE2_KEY_LEFT 19
#define GPIO_NR_PALMTE2_KEY_RIGHT 20
#define GPIO_NR_PALMTE2_KEY_DOWN 21
#define GPIO_NR_PALMTE2_KEY_UP 22
/** HERE ARE INIT VALUES **/
/* BACKLIGHT */
#define PALMTE2_MAX_INTENSITY 0xFE
#define PALMTE2_DEFAULT_INTENSITY 0x7E
#define PALMTE2_LIMIT_MASK 0x7F
#define PALMTE2_PRESCALER 0x3F
#define PALMTE2_PERIOD_NS 3500
/* BATTERY */
#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */
#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */
#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */
#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */
#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */
#endif

View File

@ -78,6 +78,8 @@
#define PALMTX_PHYS_RAM_START 0xa0000000
#define PALMTX_PHYS_IO_START 0x40000000
#define PALMTX_STR_BASE 0xa0200000
#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */

View File

@ -25,6 +25,8 @@
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/bq24022.h>
#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <mach/hardware.h>
@ -552,33 +554,7 @@ static struct platform_device gpio_vbus = {
static int power_supply_init(struct device *dev)
{
int ret;
ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
if (ret)
goto err_cs_ac;
ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
if (ret)
goto err_cs_usb;
ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
if (ret)
goto err_chg_en;
ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
if (!ret)
ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
if (ret)
goto err_nchg_en;
return 0;
err_nchg_en:
gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
err_chg_en:
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
err_cs_usb:
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
err_cs_ac:
return ret;
return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
}
static int magician_is_ac_online(void)
@ -586,22 +562,8 @@ static int magician_is_ac_online(void)
return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
}
static int magician_is_usb_online(void)
{
return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB);
}
static void magician_set_charge(int flags)
{
gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags);
gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
}
static void power_supply_exit(struct device *dev)
{
gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
}
@ -612,8 +574,6 @@ static char *magician_supplicants[] = {
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = magician_is_ac_online,
.is_usb_online = magician_is_usb_online,
.set_charge = magician_set_charge,
.exit = power_supply_exit,
.supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
@ -646,6 +606,43 @@ static struct platform_device power_supply = {
.num_resources = ARRAY_SIZE(power_supply_resources),
};
/*
* Battery charger
*/
static struct regulator_consumer_supply bq24022_consumers[] = {
{
.dev = &gpio_vbus.dev,
.supply = "vbus_draw",
},
{
.dev = &power_supply.dev,
.supply = "ac_draw",
},
};
static struct regulator_init_data bq24022_init_data = {
.constraints = {
.max_uA = 500000,
.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
},
.num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
.consumer_supplies = bq24022_consumers,
};
static struct bq24022_mach_info bq24022_info = {
.gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
.gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2,
.init_data = &bq24022_init_data,
};
static struct platform_device bq24022 = {
.name = "bq24022",
.id = -1,
.dev = {
.platform_data = &bq24022_info,
},
};
/*
* MMC/SD
@ -756,6 +753,7 @@ static struct platform_device *devices[] __initdata = {
&egpio,
&backlight,
&pasic3,
&bq24022,
&gpio_vbus,
&power_supply,
&strataflash,

View File

@ -50,6 +50,7 @@
#include <mach/pxa27x-udc.h>
#include <mach/i2c.h>
#include <mach/camera.h>
#include <mach/audio.h>
#include <media/soc_camera.h>
#include <mach/mioa701.h>
@ -763,8 +764,6 @@ MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev,
&mioa701_backlight_data);
MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL)
MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
@ -774,8 +773,6 @@ static struct platform_device *devices[] __initdata = {
&mioa701_backlight,
&mioa701_led,
&pxa2xx_pcm,
&pxa2xx_ac97,
&mio_wm9713_codec,
&mioa701_sound,
&power_dev,
&strataflash,
@ -818,6 +815,7 @@ static void __init mioa701_machine_init(void)
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(NULL);
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));

View File

@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/sysdev.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -68,10 +69,10 @@ static unsigned long palmld_pin_config[] __initdata = {
GPIO47_FICP_TXD,
/* MATRIX KEYPAD */
GPIO100_KP_MKIN_0,
GPIO101_KP_MKIN_1,
GPIO102_KP_MKIN_2,
GPIO97_KP_MKIN_3,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
@ -506,6 +507,33 @@ static struct pxafb_mach_info palmld_lcd_screen = {
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
/******************************************************************************
* Power management - standby
******************************************************************************/
#ifdef CONFIG_PM
static u32 *addr __initdata;
static u32 resume[3] __initdata = {
0xe3a00101, /* mov r0, #0x40000000 */
0xe380060f, /* orr r0, r0, #0x00f00000 */
0xe590f008, /* ldr pc, [r0, #0x08] */
};
static int __init palmld_pm_init(void)
{
int i;
/* this is where the bootloader jumps */
addr = phys_to_virt(PALMLD_STR_BASE);
for (i = 0; i < 3; i++)
addr[i] = resume[i];
return 0;
}
device_initcall(palmld_pm_init);
#endif
/******************************************************************************
* Machine init
******************************************************************************/

View File

@ -75,10 +75,10 @@ static unsigned long palmt5_pin_config[] __initdata = {
GPIO95_GPIO, /* usb power */
/* MATRIX KEYPAD */
GPIO100_KP_MKIN_0,
GPIO101_KP_MKIN_1,
GPIO102_KP_MKIN_2,
GPIO97_KP_MKIN_3,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
@ -449,6 +449,33 @@ static struct pxafb_mach_info palmt5_lcd_screen = {
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
/******************************************************************************
* Power management - standby
******************************************************************************/
#ifdef CONFIG_PM
static u32 *addr __initdata;
static u32 resume[3] __initdata = {
0xe3a00101, /* mov r0, #0x40000000 */
0xe380060f, /* orr r0, r0, #0x00f00000 */
0xe590f008, /* ldr pc, [r0, #0x08] */
};
static int __init palmt5_pm_init(void)
{
int i;
/* this is where the bootloader jumps */
addr = phys_to_virt(PALMT5_STR_BASE);
for (i = 0; i < 3; i++)
addr[i] = resume[i];
return 0;
}
device_initcall(palmt5_pm_init);
#endif
/******************************************************************************
* Machine init
******************************************************************************/

466
arch/arm/mach-pxa/palmte2.c Normal file
View File

@ -0,0 +1,466 @@
/*
* Hardware definitions for Palm Tungsten|E2
*
* Author:
* Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
*
* Rewrite for mainline:
* Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* (find more info at www.hackndev.com)
*
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/audio.h>
#include <mach/palmte2.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/mfp-pxa25x.h>
#include <mach/irda.h>
#include <mach/udc.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* Pin configuration
******************************************************************************/
static unsigned long palmte2_pin_config[] __initdata = {
/* MMC */
GPIO6_MMC_CLK,
GPIO8_MMC_CS0,
GPIO10_GPIO, /* SD detect */
GPIO55_GPIO, /* SD power */
GPIO51_GPIO, /* SD r/o switch */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
/* PWM */
GPIO16_PWM0_OUT,
/* USB */
GPIO15_GPIO, /* usb detect */
GPIO53_GPIO, /* usb power */
/* IrDA */
GPIO48_GPIO, /* ir disable */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* GPIO KEYS */
GPIO5_GPIO, /* notes */
GPIO7_GPIO, /* tasks */
GPIO11_GPIO, /* calendar */
GPIO13_GPIO, /* contacts */
GPIO14_GPIO, /* center */
GPIO19_GPIO, /* left */
GPIO20_GPIO, /* right */
GPIO21_GPIO, /* down */
GPIO22_GPIO, /* up */
/* MISC */
GPIO1_RST, /* reset */
GPIO4_GPIO, /* Hotsync button */
GPIO9_GPIO, /* power detect */
GPIO37_GPIO, /* LCD power */
GPIO56_GPIO, /* Backlight power */
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
static int palmte2_mci_init(struct device *dev,
irq_handler_t palmte2_detect_int, void *data)
{
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
if (err)
goto err;
err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
if (err)
goto err2;
err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
goto err2;
}
err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
if (err)
goto err3;
err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
if (err)
goto err4;
err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
if (err)
goto err4;
err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
if (err)
goto err5;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
err5:
gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
err4:
gpio_free(GPIO_NR_PALMTE2_SD_POWER);
err3:
free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
err2:
gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
err:
return err;
}
static void palmte2_mci_exit(struct device *dev, void *data)
{
gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
gpio_free(GPIO_NR_PALMTE2_SD_POWER);
free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
}
static void palmte2_mci_power(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
}
static int palmte2_mci_get_ro(struct device *dev)
{
return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
}
static struct pxamci_platform_data palmte2_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.setpower = palmte2_mci_power,
.get_ro = palmte2_mci_get_ro,
.init = palmte2_mci_init,
.exit = palmte2_mci_exit,
};
/******************************************************************************
* GPIO keys
******************************************************************************/
static struct gpio_keys_button palmte2_pxa_buttons[] = {
{KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" },
{KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" },
{KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" },
{KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" },
{KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" },
{KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" },
{KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" },
{KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" },
{KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" },
};
static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
.buttons = palmte2_pxa_buttons,
.nbuttons = ARRAY_SIZE(palmte2_pxa_buttons),
};
static struct platform_device palmte2_pxa_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &palmte2_pxa_keys_data,
},
};
/******************************************************************************
* Backlight
******************************************************************************/
static int palmte2_backlight_init(struct device *dev)
{
int ret;
ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
if (ret)
goto err;
ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
if (ret)
goto err2;
ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
if (ret)
goto err2;
ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
if (ret)
goto err3;
return 0;
err3:
gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
err2:
gpio_free(GPIO_NR_PALMTE2_BL_POWER);
err:
return ret;
}
static int palmte2_backlight_notify(int brightness)
{
gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
return brightness;
}
static void palmte2_backlight_exit(struct device *dev)
{
gpio_free(GPIO_NR_PALMTE2_BL_POWER);
gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
}
static struct platform_pwm_backlight_data palmte2_backlight_data = {
.pwm_id = 0,
.max_brightness = PALMTE2_MAX_INTENSITY,
.dft_brightness = PALMTE2_MAX_INTENSITY,
.pwm_period_ns = PALMTE2_PERIOD_NS,
.init = palmte2_backlight_init,
.notify = palmte2_backlight_notify,
.exit = palmte2_backlight_exit,
};
static struct platform_device palmte2_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa25x_device_pwm0.dev,
.platform_data = &palmte2_backlight_data,
},
};
/******************************************************************************
* IrDA
******************************************************************************/
static int palmte2_irda_startup(struct device *dev)
{
int err;
err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
if (err)
goto err;
err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
if (err)
gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
err:
return err;
}
static void palmte2_irda_shutdown(struct device *dev)
{
gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
}
static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data palmte2_ficp_platform_data = {
.startup = palmte2_irda_startup,
.shutdown = palmte2_irda_shutdown,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmte2_irda_transceiver_mode,
};
/******************************************************************************
* UDC
******************************************************************************/
static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
.gpio_pullup_inverted = 0,
};
/******************************************************************************
* Power supply
******************************************************************************/
static int power_supply_init(struct device *dev)
{
int ret;
ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
goto err1;
ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
if (ret)
goto err2;
return 0;
err2:
gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
err1:
return ret;
}
static int palmte2_is_ac_online(void)
{
return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
}
static void power_supply_exit(struct device *dev)
{
gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
}
static char *palmte2_supplicants[] = {
"main-battery",
};
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = palmte2_is_ac_online,
.exit = power_supply_exit,
.supplied_to = palmte2_supplicants,
.num_supplicants = ARRAY_SIZE(palmte2_supplicants),
};
static struct platform_device power_supply = {
.name = "pda-power",
.id = -1,
.dev = {
.platform_data = &power_supply_info,
},
};
/******************************************************************************
* WM97xx battery
******************************************************************************/
static struct wm97xx_batt_info wm97xx_batt_pdata = {
.batt_aux = WM97XX_AUX_ID3,
.temp_aux = WM97XX_AUX_ID2,
.charge_gpio = -1,
.max_voltage = PALMTE2_BAT_MAX_VOLTAGE,
.min_voltage = PALMTE2_BAT_MIN_VOLTAGE,
.batt_mult = 1000,
.batt_div = 414,
.temp_mult = 1,
.temp_div = 1,
.batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
.batt_name = "main-batt",
};
/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmte2_lcd_modes[] = {
{
.pixclock = 77757,
.xres = 320,
.yres = 320,
.bpp = 16,
.left_margin = 28,
.right_margin = 7,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 4,
.vsync_len = 1,
},
};
static struct pxafb_mach_info palmte2_lcd_screen = {
.modes = palmte2_lcd_modes,
.num_modes = ARRAY_SIZE(palmte2_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
/******************************************************************************
* Machine init
******************************************************************************/
static struct platform_device *devices[] __initdata = {
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&palmte2_pxa_keys,
#endif
&palmte2_backlight,
&power_supply,
};
/* setup udc GPIOs initial state */
static void __init palmte2_udc_init(void)
{
if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
}
}
static void __init palmte2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
set_pxa_fb_info(&palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
pxa_set_udc_info(&palmte2_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmte2_ficp_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(PALMTE2, "Palm Tungsten|E2")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.timer = &pxa_timer,
.init_machine = palmte2_init
MACHINE_END

View File

@ -93,10 +93,10 @@ static unsigned long palmtx_pin_config[] __initdata = {
GPIO116_GPIO, /* wifi ready */
/* MATRIX KEYPAD */
GPIO100_KP_MKIN_0,
GPIO101_KP_MKIN_1,
GPIO102_KP_MKIN_2,
GPIO97_KP_MKIN_3,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
@ -458,6 +458,33 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
/******************************************************************************
* Power management - standby
******************************************************************************/
#ifdef CONFIG_PM
static u32 *addr __initdata;
static u32 resume[3] __initdata = {
0xe3a00101, /* mov r0, #0x40000000 */
0xe380060f, /* orr r0, r0, #0x00f00000 */
0xe590f008, /* ldr pc, [r0, #0x08] */
};
static int __init palmtx_pm_init(void)
{
int i;
/* this is where the bootloader jumps */
addr = phys_to_virt(PALMTX_STR_BASE);
for (i = 0; i < 3; i++)
addr[i] = resume[i];
return 0;
}
device_initcall(palmtx_pm_init);
#endif
/******************************************************************************
* Machine init
******************************************************************************/

View File

@ -45,6 +45,7 @@
#include <mach/udc.h>
#include <mach/tosa_bt.h>
#include <mach/pxa2xx_spi.h>
#include <mach/audio.h>
#include <asm/mach/arch.h>
#include <mach/tosa.h>
@ -914,6 +915,7 @@ static void __init tosa_init(void)
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
pxa_set_ac97_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
pxa2xx_set_spi_info(2, &pxa_ssp_master_info);

View File

@ -828,6 +828,17 @@ void __init reserve_node_zero(pg_data_t *pgdat)
BOOTMEM_DEFAULT);
}
if (machine_is_palmld() || machine_is_palmtx()) {
reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
BOOTMEM_EXCLUSIVE);
reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
BOOTMEM_EXCLUSIVE);
}
if (machine_is_palmt5())
reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
BOOTMEM_EXCLUSIVE);
#ifdef CONFIG_SA1111
/*
* Because of the SA1111 DMA bug, we want to preserve our

View File

@ -280,7 +280,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
* are always powered while this driver is active, and use
* active-low power switches.
*/
for (i = 0; i < pdata->ports; i++) {
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_request(pdata->vbus_pin[i], "ohci_vbus");
@ -298,7 +298,7 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
int i;
if (pdata) {
for (i = 0; i < pdata->ports; i++) {
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_direction_output(pdata->vbus_pin[i], 1);