From 157c0f2f641a9938382b092c64548ebdabfe25e0 Mon Sep 17 00:00:00 2001 From: Badhri Jagan Sridharan Date: Mon, 1 Oct 2018 12:45:01 -0700 Subject: [PATCH] usb: typec: tcpm: charge current handling for sink during hard reset During the initial connect to a non-pd port, sink would hard reset twice before deeming that the port partner is non-pd. TCPM sets the the charge path to false during the hard reset. This causes unnecessary connects/disconnects of charge path and makes port take longer to charge from the non-pd ports. Avoid this by not setting the charge path to false unless the partner has already identified to be pd capable. When partner is a pd port, set the charge path to false in SNK_HARD_RESET_SINK_OFF. Set the current limits to default value based of CC pull up and resume the charge path when port enters SNK_HARD_RESET_SINK_ON. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Rob Herring Reviewed-by: Heikki Krogerus -------- Changes in V3: Rebase on top of usb-next Changes in V2: Based on feedback of jackp@codeaurora.org - vsafe_5v_hard_reset flag from tcpc_config is removed - Patch only differentiates between pd port partner and non-pd port partner V1 version of the patch is here: https://lkml.org/lkml/2018/9/14/11 Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index ba6e5cdaed2c..3620efee2688 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -3270,7 +3270,8 @@ static void run_state_machine(struct tcpm_port *port) case SNK_HARD_RESET_SINK_OFF: memset(&port->pps_data, 0, sizeof(port->pps_data)); tcpm_set_vconn(port, false); - tcpm_set_charge(port, false); + if (port->pd_capable) + tcpm_set_charge(port, false); tcpm_set_roles(port, port->self_powered, TYPEC_SINK, TYPEC_DEVICE); /* @@ -3302,6 +3303,12 @@ static void run_state_machine(struct tcpm_port *port) * Similar, dual-mode ports in source mode should transition * to PE_SNK_Transition_to_default. */ + if (port->pd_capable) { + tcpm_set_current_limit(port, + tcpm_get_current_limit(port), + 5000); + tcpm_set_charge(port, true); + } tcpm_set_attached_state(port, true); tcpm_set_state(port, SNK_STARTUP, 0); break;