Merge branch 'for-4.3-fixes' into for-4.4

This commit is contained in:
Tejun Heo 2015-11-03 17:29:03 -05:00
commit 159b5bb464
1604 changed files with 105261 additions and 24159 deletions

6
.gitignore vendored
View File

@ -36,6 +36,7 @@
modules.builtin
Module.symvers
*.dwo
*.su
#
# Top-level generic files
@ -44,6 +45,7 @@ Module.symvers
/TAGS
/linux
/vmlinux
/vmlinux.32
/vmlinux-gdb.py
/vmlinuz
/System.map
@ -89,6 +91,9 @@ GRTAGS
GSYMS
GTAGS
# id-utils files
ID
*.orig
*~
\#*#
@ -97,6 +102,7 @@ GTAGS
# Leavings from module signing
#
extra_certificates
signing_key.pem
signing_key.priv
signing_key.x509
x509.genkey

View File

@ -2992,6 +2992,10 @@ S: 2200 Mission College Blvd
S: Santa Clara, CA 95052
S: USA
N: Anil Ravindranath
E: anil_ravindranath@pmc-sierra.com
D: PMC-Sierra MaxRAID driver
N: Eric S. Raymond
E: esr@thyrsus.com
W: http://www.tuxedo.org/~esr/

View File

@ -0,0 +1,23 @@
What: /sys/hypervisor/pmu/pmu_mode
Date: August 2015
KernelVersion: 4.3
Contact: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Description:
Describes mode that Xen's performance-monitoring unit (PMU)
uses. Accepted values are
"off" -- PMU is disabled
"self" -- The guest can profile itself
"hv" -- The guest can profile itself and, if it is
privileged (e.g. dom0), the hypervisor
"all" -- The guest can profile itself, the hypervisor
and all other guests. Only available to
privileged guests.
What: /sys/hypervisor/pmu/pmu_features
Date: August 2015
KernelVersion: 4.3
Contact: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Description:
Describes Xen PMU features (as an integer). A set bit indicates
that the corresponding feature is enabled. See
include/xen/interface/xenpmu.h for available features

View File

@ -43,6 +43,7 @@ o udev 081 # udevd --version
o grub 0.93 # grub --version || grub-install --version
o mcelog 0.6 # mcelog --version
o iptables 1.4.2 # iptables -V
o openssl & libcrypto 1.0.1k # openssl version
Kernel compilation
@ -79,6 +80,17 @@ BC
You will need bc to build kernels 3.10 and higher
OpenSSL
-------
Module signing and external certificate handling use the OpenSSL program and
crypto library to do key creation and signature generation.
You will need openssl to build kernels 3.7 and higher if module signing is
enabled. You will also need openssl development packages to build kernels 4.3
and higher.
System utilities
================
@ -295,6 +307,10 @@ Binutils
--------
o <ftp://ftp.kernel.org/pub/linux/devel/binutils/>
OpenSSL
-------
o <https://www.openssl.org/>
System utilities
****************
@ -392,4 +408,3 @@ o <http://oprofile.sf.net/download/>
NFS-Utils
---------
o <http://nfs.sourceforge.net/>

View File

@ -104,6 +104,13 @@ crossing restrictions, pass 0 for alloc; passing 4096 says memory allocated
from this pool must not cross 4KByte boundaries.
void *dma_pool_zalloc(struct dma_pool *pool, gfp_t mem_flags,
dma_addr_t *handle)
Wraps dma_pool_alloc() and also zeroes the returned memory if the
allocation attempt succeeded.
void *dma_pool_alloc(struct dma_pool *pool, gfp_t gfp_flags,
dma_addr_t *dma_handle);

View File

@ -490,4 +490,31 @@ X!Ilib/fonts/fonts.c
!Edrivers/hsi/hsi.c
</chapter>
<chapter id="pwm">
<title>Pulse-Width Modulation (PWM)</title>
<para>
Pulse-width modulation is a modulation technique primarily used to
control power supplied to electrical devices.
</para>
<para>
The PWM framework provides an abstraction for providers and consumers
of PWM signals. A controller that provides one or more PWM signals is
registered as <structname>struct pwm_chip</structname>. Providers are
expected to embed this structure in a driver-specific structure. This
structure contains fields that describe a particular chip.
</para>
<para>
A chip exposes one or more PWM signal sources, each of which exposed
as a <structname>struct pwm_device</structname>. Operations can be
performed on PWM devices to control the period, duty cycle, polarity
and active state of the signal.
</para>
<para>
Note that PWM devices are exclusive resources: they can always only be
used by one consumer at a time.
</para>
!Iinclude/linux/pwm.h
!Edrivers/pwm/core.c
</chapter>
</book>

View File

@ -144,7 +144,8 @@ mem_used_max RW the maximum amount memory zram have consumed to
store compressed data
mem_limit RW the maximum amount of memory ZRAM can use to store
the compressed data
num_migrated RO the number of objects migrated migrated by compaction
pages_compacted RO the number of pages freed during compaction
(available only via zram<id>/mm_stat node)
compact WO trigger memory compaction
WARNING

View File

@ -201,7 +201,7 @@ Proportional weight policy files
specifies the number of bytes.
- blkio.io_serviced
- Number of IOs completed to/from the disk by the group. These
- Number of IOs (bio) issued to the disk by the group. These
are further divided by the type of operation - read or write, sync
or async. First two fields specify the major and minor number of the
device, third field specifies the operation type and the fourth field
@ -327,18 +327,11 @@ Note: If both BW and IOPS rules are specified for a device, then IO is
subjected to both the constraints.
- blkio.throttle.io_serviced
- Number of IOs (bio) completed to/from the disk by the group (as
seen by throttling policy). These are further divided by the type
of operation - read or write, sync or async. First two fields specify
the major and minor number of the device, third field specifies the
operation type and the fourth field specifies the number of IOs.
blkio.io_serviced does accounting as seen by CFQ and counts are in
number of requests (struct request). On the other hand,
blkio.throttle.io_serviced counts number of IO in terms of number
of bios as seen by throttling policy. These bios can later be
merged by elevator and total number of requests completed can be
lesser.
- Number of IOs (bio) issued to the disk by the group. These
are further divided by the type of operation - read or write, sync
or async. First two fields specify the major and minor number of the
device, third field specifies the operation type and the fourth field
specifies the number of IOs.
- blkio.throttle.io_service_bytes
- Number of bytes transferred to/from the disk by the group. These
@ -347,11 +340,6 @@ Note: If both BW and IOPS rules are specified for a device, then IO is
device, third field specifies the operation type and the fourth field
specifies the number of bytes.
These numbers should roughly be same as blkio.io_service_bytes as
updated by CFQ. The difference between two is that
blkio.io_service_bytes will not be updated if CFQ is not operating
on request queue.
Common files among various policies
-----------------------------------
- blkio.reset_stats

View File

@ -27,7 +27,7 @@ CONTENTS
5-3-1. Format
5-3-2. Control Knobs
5-4. Per-Controller Changes
5-4-1. blkio
5-4-1. io
5-4-2. cpuset
5-4-3. memory
6. Planned Changes
@ -203,7 +203,7 @@ other issues. The mapping from nice level to weight isn't obvious or
universal, and there are various other knobs which simply aren't
available for tasks.
The blkio controller implicitly creates a hidden leaf node for each
The io controller implicitly creates a hidden leaf node for each
cgroup to host the tasks. The hidden leaf has its own copies of all
the knobs with "leaf_" prefixed. While this allows equivalent control
over internal tasks, it's with serious drawbacks. It always adds an
@ -438,9 +438,62 @@ may be specified in any order and not all pairs have to be specified.
5-4. Per-Controller Changes
5-4-1. blkio
5-4-1. io
- blk-throttle becomes properly hierarchical.
- blkio is renamed to io. The interface is overhauled anyway. The
new name is more in line with the other two major controllers, cpu
and memory, and better suited given that it may be used for cgroup
writeback without involving block layer.
- Everything including stat is always hierarchical making separate
recursive stat files pointless and, as no internal node can have
tasks, leaf weights are meaningless. The operation model is
simplified and the interface is overhauled accordingly.
io.stat
The stat file. The reported stats are from the point where
bio's are issued to request_queue. The stats are counted
independent of which policies are enabled. Each line in the
file follows the following format. More fields may later be
added at the end.
$MAJ:$MIN rbytes=$RBYTES wbytes=$WBYTES rios=$RIOS wrios=$WIOS
io.weight
The weight setting, currently only available and effective if
cfq-iosched is in use for the target device. The weight is
between 1 and 10000 and defaults to 100. The first line
always contains the default weight in the following format to
use when per-device setting is missing.
default $WEIGHT
Subsequent lines list per-device weights of the following
format.
$MAJ:$MIN $WEIGHT
Writing "$WEIGHT" or "default $WEIGHT" changes the default
setting. Writing "$MAJ:$MIN $WEIGHT" sets per-device weight
while "$MAJ:$MIN default" clears it.
This file is available only on non-root cgroups.
io.max
The maximum bandwidth and/or iops setting, only available if
blk-throttle is enabled. The file is of the following format.
$MAJ:$MIN rbps=$RBPS wbps=$WBPS riops=$RIOPS wiops=$WIOPS
${R|W}BPS are read/write bytes per second and ${R|W}IOPS are
read/write IOs per second. "max" indicates no limit. Writing
to the file follows the same format but the individual
settings may be ommitted or specified in any order.
This file is available only on non-root cgroups.
5-4-2. cpuset

View File

@ -2,7 +2,11 @@ Binding for the Cadence I2C controller
Required properties:
- reg: Physical base address and size of the controller's register area.
- compatible: Compatibility string. Must be 'cdns,i2c-r1p10'.
- compatible: Should contain one of:
* "cdns,i2c-r1p10"
Note: Use this when cadence i2c controller version 1.0 is used.
* "cdns,i2c-r1p14"
Note: Use this when cadence i2c controller version 1.4 is used.
- clocks: Input clock specifier. Refer to common clock bindings.
- interrupts: Interrupt specifier. Refer to interrupt bindings.
- #address-cells: Should be 1.

View File

@ -0,0 +1,22 @@
Device tree configuration for Renesas EMEV2 IIC controller
Required properties:
- compatible : "renesas,iic-emev2"
- reg : address start and address range size of device
- interrupts : specifier for the IIC controller interrupt
- clocks : phandle to the IP core SCLK
- clock-names : must be "sclk"
- #address-cells : should be <1>
- #size-cells : should be <0>
Example:
iic0: i2c@e0070000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe0070000 0x28>;
interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic0_sclk>;
clock-names = "sclk";
};

View File

@ -0,0 +1,33 @@
NXP I2C controller for LPC2xxx/178x/18xx/43xx
Required properties:
- compatible: must be "nxp,lpc1788-i2c"
- reg: physical address and length of the device registers
- interrupts: a single interrupt specifier
- clocks: clock for the device
- #address-cells: should be <1>
- #size-cells: should be <0>
Optional properties:
- clock-frequency: the desired I2C bus clock frequency in Hz; in
absence of this property the default value is used (100 kHz).
Example:
i2c0: i2c@400a1000 {
compatible = "nxp,lpc1788-i2c";
reg = <0x400a1000 0x1000>;
interrupts = <18>;
clocks = <&ccu1 CLK_APB1_I2C0>;
#address-cells = <1>;
#size-cells = <0>;
};
&i2c0 {
clock-frequency = <400000>;
lm75@48 {
compatible = "nxp,lm75";
reg = <0x48>;
};
};

View File

@ -0,0 +1,74 @@
Register-based I2C Bus Mux
This binding describes an I2C bus multiplexer that uses a single register
to route the I2C signals.
Required properties:
- compatible: i2c-mux-reg
- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
port is connected to.
* Standard I2C mux properties. See mux.txt in this directory.
* I2C child bus nodes. See mux.txt in this directory.
Optional properties:
- reg: this pair of <offset size> specifies the register to control the mux.
The <offset size> depends on its parent node. It can be any memory-mapped
address. The size must be either 1, 2, or 4 bytes. If reg is omitted, the
resource of this device will be used.
- little-endian: The existence indicates the register is in little endian.
- big-endian: The existence indicates the register is in big endian.
If both little-endian and big-endian are omitted, the endianness of the
CPU will be used.
- write-only: The existence indicates the register is write-only.
- idle-state: value to set the muxer to when idle. When no value is
given, it defaults to the last value used.
Whenever an access is made to a device on a child bus, the value set
in the revelant node's reg property will be output to the register.
If an idle state is defined, using the idle-state (optional) property,
whenever an access is not being made to a device on a child bus, the
register will be set according to the idle value.
If an idle state is not defined, the most recently used value will be
left programmed into the register.
Example of a mux on PCIe card, the host is a powerpc SoC (big endian):
i2c-mux {
/* the <offset size> depends on the address translation
* of the parent device. If omitted, device resource
* will be used instead. The size is to determine
* whether iowrite32, iowrite16, or iowrite8 will be used.
*/
reg = <0x6028 0x4>;
little-endian; /* little endian register on PCIe */
compatible = "i2c-mux-reg";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c1>;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
si5338: clock-generator@70 {
compatible = "silabs,si5338";
reg = <0x70>;
/* other stuff */
};
};
i2c@1 {
/* data is written using iowrite32 */
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
si5338: clock-generator@70 {
compatible = "silabs,si5338";
reg = <0x70>;
/* other stuff */
};
};
};

View File

@ -0,0 +1,45 @@
Generic device tree bindings for I2C busses
===========================================
This document describes generic bindings which can be used to describe I2C
busses in a device tree.
Required properties
-------------------
- #address-cells - should be <1>. Read more about addresses below.
- #size-cells - should be <0>.
- compatible - name of I2C bus controller following generic names
recommended practice.
For other required properties e.g. to describe register sets,
clocks, etc. check the binding documentation of the specific driver.
The cells properties above define that an address of children of an I2C bus
are described by a single value. This is usually a 7 bit address. However,
flags can be attached to the address. I2C_TEN_BIT_ADDRESS is used to mark a 10
bit address. It is needed to avoid the ambiguity between e.g. a 7 bit address
of 0x50 and a 10 bit address of 0x050 which, in theory, can be on the same bus.
Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we listen to
be devices ourselves.
Optional properties
-------------------
These properties may not be supported by all drivers. However, if a driver
wants to support one of the below features, it should adapt the bindings below.
- clock-frequency - frequency of bus clock in Hz.
- wakeup-source - device can be used as a wakeup source.
- interrupts - interrupts used by the device.
- interrupt-names - "irq" and "wakeup" names are recognized by I2C core,
other names are left to individual drivers.
Binding may contain optional "interrupts" property, describing interrupts
used by the device. I2C core will assign "irq" interrupt (or the very first
interrupt if not using interrupt names) as primary interrupt for the slave.
Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
interrupt for the device. If "wakeup" interrupt name is not present in the
binding, then primary interrupt will be used as wakeup interrupt.

View File

@ -95,6 +95,8 @@ stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface
ti,ads7828 8-Channels, 12-bit ADC
ti,ads7830 8-Channels, 8-bit ADC
ti,tsc2003 I2C Touch-Screen Controller
ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface

View File

@ -0,0 +1,36 @@
* Toradex Colibri VF50 Touchscreen driver
Required Properties:
- compatible must be toradex,vf50-touchscreen
- io-channels: adc channels being used by the Colibri VF50 module
- xp-gpios: FET gate driver for input of X+
- xm-gpios: FET gate driver for input of X-
- yp-gpios: FET gate driver for input of Y+
- ym-gpios: FET gate driver for input of Y-
- interrupt-parent: phandle for the interrupt controller
- interrupts: pen irq interrupt for touch detection
- pinctrl-names: "idle", "default", "gpios"
- pinctrl-0: pinctrl node for pen/touch detection state pinmux
- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
Example:
touchctrl: vf50_touchctrl {
compatible = "toradex,vf50-touchscreen";
io-channels = <&adc1 0>,<&adc0 0>,
<&adc0 1>,<&adc1 2>;
xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&gpio0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "idle","default","gpios";
pinctrl-0 = <&pinctrl_touchctrl_idle>;
pinctrl-1 = <&pinctrl_touchctrl_default>;
pinctrl-2 = <&pinctrl_touchctrl_gpios>;
vf50-ts-min-pressure = <200>;
status = "disabled";
};

View File

@ -0,0 +1,36 @@
* Freescale i.MX6UL Touch Controller
Required properties:
- compatible: must be "fsl,imx6ul-tsc".
- reg: this touch controller address and the ADC2 address.
- interrupts: the interrupt of this touch controller and ADC2.
- clocks: the root clock of touch controller and ADC2.
- clock-names; must be "tsc" and "adc".
- xnur-gpio: the X- gpio this controller connect to.
This xnur-gpio returns to low once the finger leave the touch screen (The
last touch event the touch controller capture).
Optional properties:
- measure-delay-time: the value of measure delay time.
Before X-axis or Y-axis measurement, the screen need some time before
even potential distribution ready.
This value depends on the touch screen.
- pre-charge-time: the touch screen need some time to precharge.
This value depends on the touch screen.
Example:
tsc: tsc@02040000 {
compatible = "fsl,imx6ul-tsc";
reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_IPG>,
<&clks IMX6UL_CLK_ADC2>;
clock-names = "tsc", "adc";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xfff>;
pre-charge-time = <0xffff>;
status = "okay";
};

View File

@ -43,6 +43,12 @@ conditions.
** System MMU optional properties:
- dma-coherent : Present if page table walks made by the SMMU are
cache coherent with the CPU.
NOTE: this only applies to the SMMU itself, not
masters connected upstream of the SMMU.
- calxeda,smmu-secure-config-access : Enable proper handling of buggy
implementations that always use secure access to
SMMU configuration registers. In this case non-secure

View File

@ -8,6 +8,11 @@ Required properties:
- ti,hwmods : Name of the hwmod associated with the IOMMU instance
- reg : Address space for the configuration registers
- interrupts : Interrupt specifier for the IOMMU instance
- #iommu-cells : Should be 0. OMAP IOMMUs are all "single-master" devices,
and needs no additional data in the pargs specifier. Please
also refer to the generic bindings document for more info
on this property,
Documentation/devicetree/bindings/iommu/iommu.txt
Optional properties:
- ti,#tlb-entries : Number of entries in the translation look-aside buffer.
@ -18,6 +23,7 @@ Optional properties:
Example:
/* OMAP3 ISP MMU */
mmu_isp: mmu@480bd400 {
#iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x480bd400 0x80>;
interrupts = <24>;

View File

@ -0,0 +1,25 @@
IPMI device
Required properties:
- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt
- device_type: should be ipmi
- reg: Address and length of the register set for the device
Optional properties:
- interrupts: The interrupt for the device. Without this the interface
is polled.
- reg-size - The size of the register. Defaults to 1
- reg-spacing - The number of bytes between register starts. Defaults to 1
- reg-shift - The amount to shift the registers to the right to get the data
into bit zero.
Example:
smic@fff3a000 {
compatible = "ipmi-smic";
device_type = "ipmi";
reg = <0xfff3a000 0x1000>;
interrupts = <0 24 4>;
reg-size = <4>;
reg-spacing = <4>;
};

View File

@ -9,7 +9,7 @@ Device Tree Bindings for the Arasan SDHCI Controller
Required Properties:
- compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' or
'arasan,sdhci-4.9a'
'arasan,sdhci-4.9a' or 'arasan,sdhci-5.1'
- reg: From mmc bindings: Register location and length.
- clocks: From clock bindings: Handles to clock inputs.
- clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"

View File

@ -15,6 +15,7 @@ Required properties:
"fsl,imx6q-usdhc"
"fsl,imx6sl-usdhc"
"fsl,imx6sx-usdhc"
"fsl,imx7d-usdhc"
Optional properties:
- fsl,wp-controller : Indicate to use controller internal write protection
@ -27,6 +28,11 @@ Optional properties:
transparent level shifters on the outputs of the controller. Two cells are
required, first cell specifies minimum slot voltage (mV), second cell
specifies maximum slot voltage (mV). Several ranges could be specified.
- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure.
The uSDHC use one delay cell as default increasing step to do tuning process.
This property allows user to change the tuning step to more than one delay
cells which is useful for some special boards or cards when the default
tuning step can't find the proper delay window within limited tuning retries.
Examples:

View File

@ -0,0 +1,21 @@
* Atmel SDHCI controller
This file documents the differences between the core properties in
Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the
sdhci-of-at91 driver.
Required properties:
- compatible: Must be "atmel,sama5d2-sdhci".
- clocks: Phandlers to the clocks.
- clock-names: Must be "hclock", "multclk", "baseclk";
Example:
sdmmc0: sdio-host@a0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
clock-names = "hclock", "multclk", "baseclk";
};

View File

@ -102,7 +102,7 @@ not every application needs SDIO irq, e.g. MMC cards.
pinctrl-1 = <&mmc1_idle>;
pinctrl-2 = <&mmc1_sleep>;
...
interrupts-extended = <&intc 64 &gpio2 28 0>;
interrupts-extended = <&intc 64 &gpio2 28 GPIO_ACTIVE_LOW>;
};
mmc1_idle : pinmux_cirq_pin {

View File

@ -0,0 +1,20 @@
* NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver
Required properties:
- compatible: Should be "nxp,lpc1850-sct-pwm"
- reg: Should contain physical base address and length of pwm registers.
- clocks: Must contain an entry for each entry in clock-names.
See ../clock/clock-bindings.txt for details.
- clock-names: Must include the following entries.
- pwm: PWM operating clock.
- #pwm-cells: Should be 3. See pwm.txt in this directory for the description
of the cells format.
Example:
pwm: pwm@40000000 {
compatible = "nxp,lpc1850-sct-pwm";
reg = <0x40000000 0x1000>;
clocks =<&ccu1 CLK_CPU_SCT>;
clock-names = "pwm";
#pwm-cells = <3>;
};

View File

@ -0,0 +1,21 @@
NXP LPC1788 real-time clock
The LPC1788 RTC provides calendar and clock functionality
together with periodic tick and alarm interrupt support.
Required properties:
- compatible : must contain "nxp,lpc1788-rtc"
- reg : Specifies base physical address and size of the registers.
- interrupts : A single interrupt specifier.
- clocks : Must contain clock specifiers for rtc and register clock
- clock-names : Must contain "rtc" and "reg"
See ../clocks/clock-bindings.txt for details.
Example:
rtc: rtc@40046000 {
compatible = "nxp,lpc1788-rtc";
reg = <0x40046000 0x1000>;
interrupts = <47>;
clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
clock-names = "rtc", "reg";
};

View File

@ -16,6 +16,8 @@ Required properties:
Optional properties:
- system-power-controller: whether the rtc is controlling the system power
through pmic_power_en
- clocks: Any internal or external clocks feeding in to rtc
- clock-names: Corresponding names of the clocks
Example:
@ -26,4 +28,6 @@ rtc@1c23000 {
19>;
interrupt-parent = <&intc>;
system-power-controller;
clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
clock-names = "ext-clk", "int-clk";
};

View File

@ -0,0 +1,25 @@
* Xilinx Zynq Ultrascale+ MPSoC Real Time Clock
RTC controller for the Xilinx Zynq MPSoC Real Time Clock
Separate IRQ lines for seconds and alarm
Required properties:
- compatible: Should be "xlnx,zynqmp-rtc"
- reg: Physical base address of the controller and length
of memory mapped region.
- interrupts: IRQ lines for the RTC.
- interrupt-names: interrupt line names eg. "sec" "alarm"
Optional:
- calibration: calibration value for 1 sec period which will
be programmed directly to calibration register
Example:
rtc: rtc@ffa60000 {
compatible = "xlnx,zynqmp-rtc";
reg = <0x0 0xffa60000 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 26 4>, <0 27 4>;
interrupt-names = "alarm", "sec";
calibration = <0x198233>;
};

View File

@ -37,6 +37,12 @@ The edge is described by the following properties:
Definition: the identifier of the remote processor in the smd channel
allocation table
- qcom,remote-pid:
Usage: optional
Value type: <u32>
Definition: the identifier for the remote processor as known by the rest
of the system.
= SMD DEVICES
In turn, subnodes of the "edges" represent devices tied to SMD channels on that

View File

@ -0,0 +1,35 @@
* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
Required properties:
- compatible: "atmel,sama5d4-wdt"
- reg: base physical address and length of memory mapped region.
Optional properties:
- timeout-sec: watchdog timeout value (in seconds).
- interrupts: interrupt number to the CPU.
- atmel,watchdog-type: should be "hardware" or "software".
"hardware": enable watchdog fault reset. A watchdog fault triggers
watchdog reset.
"software": enable watchdog fault interrupt. A watchdog fault asserts
watchdog interrupt.
- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
in idle state.
CAUTION: This property should be used with care, it actually makes the
watchdog not counting when the CPU is in idle state, therefore the
watchdog reset time depends on mean CPU usage and will not reset at all
if the CPU stop working while it is in idle state, which is probably
not what you want.
- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
in debug state.
Example:
watchdog@fc068640 {
compatible = "atmel,sama5d4-wdt";
reg = <0xfc068640 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
timeout-sec = <10>;
atmel,watchdog-type = "hardware";
atmel,dbg-halt;
atmel,idle-halt;
status = "okay";
};

View File

@ -0,0 +1,19 @@
* NXP LPC18xx Watchdog Timer (WDT)
Required properties:
- compatible: Should be "nxp,lpc1850-wwdt"
- reg: Should contain WDT registers location and length
- clocks: Must contain an entry for each entry in clock-names.
- clock-names: Should contain "wdtclk" and "reg"; the watchdog counter
clock and register interface clock respectively.
- interrupts: Should contain WDT interrupt
Examples:
watchdog@40080000 {
compatible = "nxp,lpc1850-wwdt";
reg = <0x40080000 0x24>;
clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
clock-names = "wdtclk", "reg";
interrupts = <49>;
};

View File

@ -20,7 +20,7 @@
| ia64: | TODO |
| m32r: | .. |
| m68k: | .. |
| metag: | .. |
| metag: | TODO |
| microblaze: | .. |
| mips: | ok |
| mn10300: | .. |

View File

@ -397,7 +397,8 @@ prototypes:
int (*release) (struct gendisk *, fmode_t);
int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
int (*direct_access) (struct block_device *, sector_t, void **, unsigned long *);
int (*direct_access) (struct block_device *, sector_t, void __pmem **,
unsigned long *);
int (*media_changed) (struct gendisk *);
void (*unlock_native_capacity) (struct gendisk *);
int (*revalidate_disk) (struct gendisk *);

View File

@ -60,9 +60,10 @@ Filesystem support consists of
- implementing the direct_IO address space operation, and calling
dax_do_io() instead of blockdev_direct_IO() if S_DAX is set
- implementing an mmap file operation for DAX files which sets the
VM_MIXEDMAP flag on the VMA, and setting the vm_ops to include handlers
for fault and page_mkwrite (which should probably call dax_fault() and
dax_mkwrite(), passing the appropriate get_block() callback)
VM_MIXEDMAP and VM_HUGEPAGE flags on the VMA, and setting the vm_ops to
include handlers for fault, pmd_fault and page_mkwrite (which should
probably call dax_fault(), dax_pmd_fault() and dax_mkwrite(), passing the
appropriate get_block() callback)
- calling dax_truncate_page() instead of block_truncate_page() for DAX files
- calling dax_zero_page_range() instead of zero_user() for DAX files
- ensuring that there is sufficient locking between reads, writes,

View File

@ -424,6 +424,7 @@ Private_Dirty: 0 kB
Referenced: 892 kB
Anonymous: 0 kB
Swap: 0 kB
SwapPss: 0 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Locked: 374 kB
@ -433,16 +434,23 @@ the first of these lines shows the same information as is displayed for the
mapping in /proc/PID/maps. The remaining lines show the size of the mapping
(size), the amount of the mapping that is currently resident in RAM (RSS), the
process' proportional share of this mapping (PSS), the number of clean and
dirty private pages in the mapping. Note that even a page which is part of a
MAP_SHARED mapping, but has only a single pte mapped, i.e. is currently used
by only one process, is accounted as private and not as shared. "Referenced"
indicates the amount of memory currently marked as referenced or accessed.
dirty private pages in the mapping.
The "proportional set size" (PSS) of a process is the count of pages it has
in memory, where each page is divided by the number of processes sharing it.
So if a process has 1000 pages all to itself, and 1000 shared with one other
process, its PSS will be 1500.
Note that even a page which is part of a MAP_SHARED mapping, but has only
a single pte mapped, i.e. is currently used by only one process, is accounted
as private and not as shared.
"Referenced" indicates the amount of memory currently marked as referenced or
accessed.
"Anonymous" shows the amount of memory that does not belong to any file. Even
a mapping associated with a file may contain anonymous pages: when MAP_PRIVATE
and a page is modified, the file page is replaced by a private anonymous copy.
"Swap" shows how much would-be-anonymous memory is also used, but out on
swap.
"SwapPss" shows proportional swap share of this mapping.
"VmFlags" field deserves a separate description. This member represents the kernel
flags associated with the particular virtual memory area in two letter encoded
manner. The codes are the following:

View File

@ -20,6 +20,7 @@ It currently supports the following devices:
* (type=5) Analog Devices evaluation boards: ADM1025, ADM1030, ADM1031
* (type=6) Barco LPT->DVI (K5800236) adapter
* (type=7) One For All JP1 parallel port adapter
* (type=8) VCT-jig
These devices use different pinout configurations, so you have to tell
the driver what you have, using the type module parameter. There is no

View File

@ -31,10 +31,13 @@ User manual
===========
I2C slave backends behave like standard I2C clients. So, you can instantiate
them as described in the document 'instantiating-devices'. A quick example for
instantiating the slave-eeprom driver from userspace at address 0x64 on bus 1:
them as described in the document 'instantiating-devices'. The only difference
is that i2c slave backends have their own address space. So, you have to add
0x1000 to the address you would originally request. An example for
instantiating the slave-eeprom driver from userspace at the 7 bit address 0x64
on bus 1:
# echo slave-24c02 0x64 > /sys/bus/i2c/devices/i2c-1/new_device
# echo slave-24c02 0x1064 > /sys/bus/i2c/devices/i2c-1/new_device
Each backend should come with separate documentation to describe its specific
behaviour and setup.

View File

@ -2,6 +2,10 @@ The I2C protocol knows about two kinds of device addresses: normal 7 bit
addresses, and an extended set of 10 bit addresses. The sets of addresses
do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
address 0x10 (though a single device could respond to both of them).
To avoid ambiguity, the user sees 10 bit addresses mapped to a different
address space, namely 0xa000-0xa3ff. The leading 0xa (= 10) represents the
10 bit mode. This is used for creating device names in sysfs. It is also
needed when instantiating 10 bit devices via the new_device file in sysfs.
I2C messages to and from 10-bit address devices have a different format.
See the I2C specification for the details.

View File

@ -64,3 +64,23 @@ MTHCA
fw_ver - Firmware version
hca_type - HCA type: "MT23108", "MT25208 (MT23108 compat mode)",
or "MT25208"
HFI1
The hfi1 driver also creates these additional files:
hw_rev - hardware revision
board_id - manufacturing board id
tempsense - thermal sense information
serial - board serial number
nfreectxts - number of free user contexts
nctxts - number of allowed contexts (PSM2)
chip_reset - diagnostic (root only)
boardversion - board version
ports/1/
CMgtA/
cc_settings_bin - CCA tables used by PSM2
cc_table_bin
sc2v/ - 32 files (0 - 31) used to translate sl->vl
sl2sc/ - 32 files (0 - 31) used to translate sl->sc
vl2mtu/ - 16 (0 - 15) files used to determine MTU for vl

View File

@ -265,7 +265,7 @@ Code Seq#(hex) Include File Comments
's' all linux/cdk.h
't' 00-7F linux/ppp-ioctl.h
't' 80-8F linux/isdn_ppp.h
't' 90 linux/toshiba.h
't' 90-91 linux/toshiba.h toshiba and toshiba_acpi SMM
'u' 00-1F linux/smb_fs.h gone
'u' 20-3F linux/uvcvideo.h USB video class host driver
'v' 00-1F linux/ext2_fs.h conflict!

View File

@ -174,6 +174,11 @@ The output directory is often set using "O=..." on the commandline.
The value can be overridden in which case the default value is ignored.
KBUILD_SIGN_PIN
--------------------------------------------------
This variable allows a passphrase or PIN to be passed to the sign-file
utility when signing kernel modules, if the private key requires such.
KBUILD_MODPOST_WARN
--------------------------------------------------
KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined

View File

@ -4106,6 +4106,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
plus one apbt timer for broadcast timer.
x86_intel_mid_timer=apbt_only | lapic_and_apbt
xen_512gb_limit [KNL,X86-64,XEN]
Restricts the kernel running paravirtualized under Xen
to use only up to 512 GB of RAM. The reason to do so is
crash analysis tools and Xen tools for doing domain
save/restore/migration must be enabled to handle larger
domains.
xen_emul_unplug= [HW,X86,XEN]
Unplug Xen emulated devices
Format: [unplug0,][unplug1]

View File

@ -89,6 +89,32 @@ This has a number of options available:
their signatures checked without causing a dependency loop.
(4) "File name or PKCS#11 URI of module signing key" (CONFIG_MODULE_SIG_KEY)
Setting this option to something other than its default of
"certs/signing_key.pem" will disable the autogeneration of signing keys
and allow the kernel modules to be signed with a key of your choosing.
The string provided should identify a file containing both a private key
and its corresponding X.509 certificate in PEM form, or — on systems where
the OpenSSL ENGINE_pkcs11 is functional — a PKCS#11 URI as defined by
RFC7512. In the latter case, the PKCS#11 URI should reference both a
certificate and a private key.
If the PEM file containing the private key is encrypted, or if the
PKCS#11 token requries a PIN, this can be provided at build time by
means of the KBUILD_SIGN_PIN variable.
(5) "Additional X.509 keys for default system keyring" (CONFIG_SYSTEM_TRUSTED_KEYS)
This option can be set to the filename of a PEM-encoded file containing
additional certificates which will be included in the system keyring by
default.
Note that enabling module signing adds a dependency on the OpenSSL devel
packages to the kernel build processes for the tool that does the signing.
=======================
GENERATING SIGNING KEYS
=======================
@ -100,16 +126,16 @@ it can be deleted or stored securely. The public key gets built into the
kernel so that it can be used to check the signatures as the modules are
loaded.
Under normal conditions, the kernel build will automatically generate a new
keypair using openssl if one does not exist in the files:
Under normal conditions, when CONFIG_MODULE_SIG_KEY is unchanged from its
default, the kernel build will automatically generate a new keypair using
openssl if one does not exist in the file:
signing_key.priv
signing_key.x509
certs/signing_key.pem
during the building of vmlinux (the public part of the key needs to be built
into vmlinux) using parameters in the:
x509.genkey
certs/x509.genkey
file (which is also generated if it does not already exist).
@ -135,8 +161,12 @@ kernel sources tree and the openssl command. The following is an example to
generate the public/private key files:
openssl req -new -nodes -utf8 -sha256 -days 36500 -batch -x509 \
-config x509.genkey -outform DER -out signing_key.x509 \
-keyout signing_key.priv
-config x509.genkey -outform PEM -out kernel_key.pem \
-keyout kernel_key.pem
The full pathname for the resulting kernel_key.pem file can then be specified
in the CONFIG_MODULE_SIG_KEY option, and the certificate and key therein will
be used instead of an autogenerated keypair.
=========================
@ -152,10 +182,9 @@ in a keyring called ".system_keyring" that can be seen by:
302d2d52 I------ 1 perm 1f010000 0 0 asymmetri Fedora kernel signing key: d69a84e6bce3d216b979e9505b3e3ef9a7118079: X509.RSA a7118079 []
...
Beyond the public key generated specifically for module signing, any file
placed in the kernel source root directory or the kernel build root directory
whose name is suffixed with ".x509" will be assumed to be an X.509 public key
and will be added to the keyring.
Beyond the public key generated specifically for module signing, additional
trusted certificates can be provided in a PEM-encoded file referenced by the
CONFIG_SYSTEM_TRUSTED_KEYS configuration option.
Further, the architecture code may take public keys from a hardware store and
add those in also (e.g. from the UEFI key database).
@ -181,7 +210,7 @@ To manually sign a module, use the scripts/sign-file tool available in
the Linux kernel source tree. The script requires 4 arguments:
1. The hash algorithm (e.g., sha256)
2. The private key filename
2. The private key filename or PKCS#11 URI
3. The public key filename
4. The kernel module to be signed
@ -194,6 +223,9 @@ The hash algorithm used does not have to match the one configured, but if it
doesn't, you should make sure that hash algorithm is either built into the
kernel or can be loaded without requiring itself.
If the private key requires a passphrase or PIN, it can be provided in the
$KBUILD_SIGN_PIN environment variable.
============================
SIGNED MODULES AND STRIPPING

View File

@ -28,6 +28,10 @@ Smack kernels use the CIPSO IP option. Some network
configurations are intolerant of IP options and can impede
access to systems that use them as Smack does.
Smack is used in the Tizen operating system. Please
go to http://wiki.tizen.org for information about how
Smack is used in Tizen.
The current git repository for Smack user space is:
git://github.com/smack-team/smack.git
@ -108,6 +112,8 @@ in the smackfs filesystem. This pseudo-filesystem is mounted
on /sys/fs/smackfs.
access
Provided for backward compatibility. The access2 interface
is preferred and should be used instead.
This interface reports whether a subject with the specified
Smack label has a particular access to an object with a
specified Smack label. Write a fixed format access rule to
@ -136,6 +142,8 @@ change-rule
those in the fourth string. If there is no such rule it will be
created using the access specified in the third and the fourth strings.
cipso
Provided for backward compatibility. The cipso2 interface
is preferred and should be used instead.
This interface allows a specific CIPSO header to be assigned
to a Smack label. The format accepted on write is:
"%24s%4d%4d"["%4d"]...
@ -157,7 +165,19 @@ direct
doi
This contains the CIPSO domain of interpretation used in
network packets.
ipv6host
This interface allows specific IPv6 internet addresses to be
treated as single label hosts. Packets are sent to single
label hosts only from processes that have Smack write access
to the host label. All packets received from single label hosts
are given the specified label. The format accepted on write is:
"%h:%h:%h:%h:%h:%h:%h:%h label" or
"%h:%h:%h:%h:%h:%h:%h:%h/%d label".
The "::" address shortcut is not supported.
If label is "-DELETE" a matched entry will be deleted.
load
Provided for backward compatibility. The load2 interface
is preferred and should be used instead.
This interface allows access control rules in addition to
the system defined rules to be specified. The format accepted
on write is:
@ -181,6 +201,8 @@ load2
permissions that are not allowed. The string "r-x--" would
specify read and execute access.
load-self
Provided for backward compatibility. The load-self2 interface
is preferred and should be used instead.
This interface allows process specific access rules to be
defined. These rules are only consulted if access would
otherwise be permitted, and are intended to provide additional
@ -205,6 +227,8 @@ netlabel
received from single label hosts are given the specified
label. The format accepted on write is:
"%d.%d.%d.%d label" or "%d.%d.%d.%d/%d label".
If the label specified is "-CIPSO" the address is treated
as a host that supports CIPSO headers.
onlycap
This contains labels processes must have for CAP_MAC_ADMIN
and CAP_MAC_OVERRIDE to be effective. If this file is empty
@ -232,7 +256,8 @@ unconfined
is dangerous and can ruin the proper labeling of your system.
It should never be used in production.
You can add access rules in /etc/smack/accesses. They take the form:
If you are using the smackload utility
you can add access rules in /etc/smack/accesses. They take the form:
subjectlabel objectlabel access

View File

@ -1,9 +1,7 @@
Yama is a Linux Security Module that collects a number of system-wide DAC
security protections that are not handled by the core kernel itself. To
select it at boot time, specify "security=yama" (though this will disable
any other LSM).
Yama is controlled through sysctl in /proc/sys/kernel/yama:
Yama is a Linux Security Module that collects system-wide DAC security
protections that are not handled by the core kernel itself. This is
selectable at build-time with CONFIG_SECURITY_YAMA, and can be controlled
at run-time through sysctls in /proc/sys/kernel/yama:
- ptrace_scope

View File

@ -349,7 +349,7 @@ zone[i]'s protection[j] is calculated by following expression.
(i < j):
zone[i]->protection[j]
= (total sums of present_pages from zone[i+1] to zone[j] on the node)
= (total sums of managed_pages from zone[i+1] to zone[j] on the node)
/ lowmem_reserve_ratio[i];
(i = j):
(should not be protected. = 0;
@ -360,7 +360,7 @@ The default values of lowmem_reserve_ratio[i] are
256 (if zone[i] means DMA or DMA32 zone)
32 (others).
As above expression, they are reciprocal number of ratio.
256 means 1/256. # of protection pages becomes about "0.39%" of total present
256 means 1/256. # of protection pages becomes about "0.39%" of total managed
pages of higher zones on the node.
If you would like to protect more pages, smaller values are effective.

View File

@ -75,7 +75,8 @@ On all - write a character to /proc/sysrq-trigger. e.g.:
'e' - Send a SIGTERM to all processes, except for init.
'f' - Will call oom_kill to kill a memory hog process.
'f' - Will call the oom killer to kill a memory hog process, but do not
panic if nothing can be killed.
'g' - Used by kgdb (kernel debugger)

View File

@ -180,6 +180,7 @@ Thermal zone device sys I/F, created once it's registered:
|---temp: Current temperature
|---mode: Working mode of the thermal zone
|---policy: Thermal governor used for this zone
|---available_policies: Available thermal governors for this zone
|---trip_point_[0-*]_temp: Trip point temperature
|---trip_point_[0-*]_type: Trip point type
|---trip_point_[0-*]_hyst: Hysteresis value for this trip point
@ -256,6 +257,10 @@ policy
One of the various thermal governors used for a particular zone.
RW, Required
available_policies
Available thermal governors which can be used for a particular zone.
RO, Required
trip_point_[0-*]_temp
The temperature above which trip point will be fired.
Unit: millidegree Celsius
@ -417,6 +422,7 @@ method, the sys I/F structure will be built like this:
|---temp: 37000
|---mode: enabled
|---policy: step_wise
|---available_policies: step_wise fair_share
|---trip_point_0_temp: 100000
|---trip_point_0_type: critical
|---trip_point_1_temp: 80000

View File

@ -691,6 +691,8 @@ The above is mostly meaningful for kernel developers.
The marks are determined by the difference between this
current trace and the next trace.
'$' - greater than 1 second
'@' - greater than 100 milisecond
'*' - greater than 10 milisecond
'#' - greater than 1000 microsecond
'!' - greater than 100 microsecond
'+' - greater than 10 microsecond
@ -1944,26 +1946,49 @@ want, depending on your needs.
ie:
0) | up_write() {
0) 0.646 us | _spin_lock_irqsave();
0) 0.684 us | _spin_unlock_irqrestore();
0) 3.123 us | }
0) 0.548 us | fput();
0) + 58.628 us | }
3) # 1837.709 us | } /* __switch_to */
3) | finish_task_switch() {
3) 0.313 us | _raw_spin_unlock_irq();
3) 3.177 us | }
3) # 1889.063 us | } /* __schedule */
3) ! 140.417 us | } /* __schedule */
3) # 2034.948 us | } /* schedule */
3) * 33998.59 us | } /* schedule_preempt_disabled */
[...]
0) | putname() {
0) | kmem_cache_free() {
0) 0.518 us | __phys_addr();
0) 1.757 us | }
0) 2.861 us | }
0) ! 115.305 us | }
0) ! 116.402 us | }
1) 0.260 us | msecs_to_jiffies();
1) 0.313 us | __rcu_read_unlock();
1) + 61.770 us | }
1) + 64.479 us | }
1) 0.313 us | rcu_bh_qs();
1) 0.313 us | __local_bh_enable();
1) ! 217.240 us | }
1) 0.365 us | idle_cpu();
1) | rcu_irq_exit() {
1) 0.417 us | rcu_eqs_enter_common.isra.47();
1) 3.125 us | }
1) ! 227.812 us | }
1) ! 457.395 us | }
1) @ 119760.2 us | }
[...]
2) | handle_IPI() {
1) 6.979 us | }
2) 0.417 us | scheduler_ipi();
1) 9.791 us | }
1) + 12.917 us | }
2) 3.490 us | }
1) + 15.729 us | }
1) + 18.542 us | }
2) $ 3594274 us | }
+ means that the function exceeded 10 usecs.
! means that the function exceeded 100 usecs.
# means that the function exceeded 1000 usecs.
* means that the function exceeded 10 msecs.
@ means that the function exceeded 100 msecs.
$ means that the function exceeded 1 sec.

View File

@ -2671,7 +2671,7 @@ handled.
4.87 KVM_SET_GUEST_DEBUG
Capability: KVM_CAP_SET_GUEST_DEBUG
Architectures: x86, s390, ppc
Architectures: x86, s390, ppc, arm64
Type: vcpu ioctl
Parameters: struct kvm_guest_debug (in)
Returns: 0 on success; -1 on error
@ -2693,8 +2693,8 @@ when running. Common control bits are:
The top 16 bits of the control field are architecture specific control
flags which can include the following:
- KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86]
- KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390]
- KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86, arm64]
- KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390, arm64]
- KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86]
- KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86]
- KVM_GUESTDBG_EXIT_PENDING: trigger an immediate guest exit [s390]
@ -2709,6 +2709,11 @@ updated to the correct (supplied) values.
The second part of the structure is architecture specific and
typically contains a set of debug registers.
For arm64 the number of debug registers is implementation defined and
can be determined by querying the KVM_CAP_GUEST_DEBUG_HW_BPS and
KVM_CAP_GUEST_DEBUG_HW_WPS capabilities which return a positive number
indicating the number of supported registers.
When debug events exit the main run loop with the reason
KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run
structure containing architecture specific debug information.
@ -3111,11 +3116,13 @@ data_offset describes where the data is located (KVM_EXIT_IO_OUT) or
where kvm expects application code to place the data for the next
KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a packed array.
/* KVM_EXIT_DEBUG */
struct {
struct kvm_debug_exit_arch arch;
} debug;
Unused.
If the exit_reason is KVM_EXIT_DEBUG, then a vcpu is processing a debug event
for which architecture specific information is returned.
/* KVM_EXIT_MMIO */
struct {

View File

@ -14,6 +14,8 @@ hugetlbpage.txt
- a brief summary of hugetlbpage support in the Linux kernel.
hwpoison.txt
- explains what hwpoison is
idle_page_tracking.txt
- description of the idle page tracking feature.
ksm.txt
- how to use the Kernel Samepage Merging feature.
numa

View File

@ -329,7 +329,14 @@ Examples
3) hugepage-mmap: see tools/testing/selftests/vm/hugepage-mmap.c
4) The libhugetlbfs (http://libhugetlbfs.sourceforge.net) library provides a
wide range of userspace tools to help with huge page usability, environment
setup, and control. Furthermore it provides useful test cases that should be
used when modifying code to ensure no regressions are introduced.
4) The libhugetlbfs (https://github.com/libhugetlbfs/libhugetlbfs) library
provides a wide range of userspace tools to help with huge page usability,
environment setup, and control.
Kernel development regression testing
=====================================
The most complete set of hugetlb tests are in the libhugetlbfs repository.
If you modify any hugetlb related code, use the libhugetlbfs test suite
to check for regressions. In addition, if you add any new hugetlb
functionality, please add appropriate tests to libhugetlbfs.

View File

@ -0,0 +1,98 @@
MOTIVATION
The idle page tracking feature allows to track which memory pages are being
accessed by a workload and which are idle. This information can be useful for
estimating the workload's working set size, which, in turn, can be taken into
account when configuring the workload parameters, setting memory cgroup limits,
or deciding where to place the workload within a compute cluster.
It is enabled by CONFIG_IDLE_PAGE_TRACKING=y.
USER API
The idle page tracking API is located at /sys/kernel/mm/page_idle. Currently,
it consists of the only read-write file, /sys/kernel/mm/page_idle/bitmap.
The file implements a bitmap where each bit corresponds to a memory page. The
bitmap is represented by an array of 8-byte integers, and the page at PFN #i is
mapped to bit #i%64 of array element #i/64, byte order is native. When a bit is
set, the corresponding page is idle.
A page is considered idle if it has not been accessed since it was marked idle
(for more details on what "accessed" actually means see the IMPLEMENTATION
DETAILS section). To mark a page idle one has to set the bit corresponding to
the page by writing to the file. A value written to the file is OR-ed with the
current bitmap value.
Only accesses to user memory pages are tracked. These are pages mapped to a
process address space, page cache and buffer pages, swap cache pages. For other
page types (e.g. SLAB pages) an attempt to mark a page idle is silently ignored,
and hence such pages are never reported idle.
For huge pages the idle flag is set only on the head page, so one has to read
/proc/kpageflags in order to correctly count idle huge pages.
Reading from or writing to /sys/kernel/mm/page_idle/bitmap will return
-EINVAL if you are not starting the read/write on an 8-byte boundary, or
if the size of the read/write is not a multiple of 8 bytes. Writing to
this file beyond max PFN will return -ENXIO.
That said, in order to estimate the amount of pages that are not used by a
workload one should:
1. Mark all the workload's pages as idle by setting corresponding bits in
/sys/kernel/mm/page_idle/bitmap. The pages can be found by reading
/proc/pid/pagemap if the workload is represented by a process, or by
filtering out alien pages using /proc/kpagecgroup in case the workload is
placed in a memory cgroup.
2. Wait until the workload accesses its working set.
3. Read /sys/kernel/mm/page_idle/bitmap and count the number of bits set. If
one wants to ignore certain types of pages, e.g. mlocked pages since they
are not reclaimable, he or she can filter them out using /proc/kpageflags.
See Documentation/vm/pagemap.txt for more information about /proc/pid/pagemap,
/proc/kpageflags, and /proc/kpagecgroup.
IMPLEMENTATION DETAILS
The kernel internally keeps track of accesses to user memory pages in order to
reclaim unreferenced pages first on memory shortage conditions. A page is
considered referenced if it has been recently accessed via a process address
space, in which case one or more PTEs it is mapped to will have the Accessed bit
set, or marked accessed explicitly by the kernel (see mark_page_accessed()). The
latter happens when:
- a userspace process reads or writes a page using a system call (e.g. read(2)
or write(2))
- a page that is used for storing filesystem buffers is read or written,
because a process needs filesystem metadata stored in it (e.g. lists a
directory tree)
- a page is accessed by a device driver using get_user_pages()
When a dirty page is written to swap or disk as a result of memory reclaim or
exceeding the dirty memory limit, it is not marked referenced.
The idle memory tracking feature adds a new page flag, the Idle flag. This flag
is set manually, by writing to /sys/kernel/mm/page_idle/bitmap (see the USER API
section), and cleared automatically whenever a page is referenced as defined
above.
When a page is marked idle, the Accessed bit must be cleared in all PTEs it is
mapped to, otherwise we will not be able to detect accesses to the page coming
from a process address space. To avoid interference with the reclaimer, which,
as noted above, uses the Accessed bit to promote actively referenced pages, one
more page flag is introduced, the Young flag. When the PTE Accessed bit is
cleared as a result of setting or updating a page's Idle flag, the Young flag
is set on the page. The reclaimer treats the Young flag as an extra PTE
Accessed bit and therefore will consider such a page as referenced.
Since the idle memory tracking feature is based on the memory reclaimer logic,
it only works with pages that are on an LRU list, other pages are silently
ignored. That means it will ignore a user memory page if it is isolated, but
since there are usually not many of them, it should not affect the overall
result noticeably. In order not to stall scanning of the idle page bitmap,
locked pages may be skipped too.

View File

@ -5,7 +5,7 @@ pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow
userspace programs to examine the page tables and related information by
reading files in /proc.
There are three components to pagemap:
There are four components to pagemap:
* /proc/pid/pagemap. This file lets a userspace process find out which
physical frame each virtual page is mapped to. It contains one 64-bit
@ -16,11 +16,17 @@ There are three components to pagemap:
* Bits 0-4 swap type if swapped
* Bits 5-54 swap offset if swapped
* Bit 55 pte is soft-dirty (see Documentation/vm/soft-dirty.txt)
* Bits 56-60 zero
* Bit 61 page is file-page or shared-anon
* Bit 56 page exclusively mapped (since 4.2)
* Bits 57-60 zero
* Bit 61 page is file-page or shared-anon (since 3.5)
* Bit 62 page swapped
* Bit 63 page present
Since Linux 4.0 only users with the CAP_SYS_ADMIN capability can get PFNs.
In 4.0 and 4.1 opens by unprivileged fail with -EPERM. Starting from
4.2 the PFN field is zeroed if the user does not have CAP_SYS_ADMIN.
Reason: information about PFNs helps in exploiting Rowhammer vulnerability.
If the page is not present but in swap, then the PFN contains an
encoding of the swap file number and the page's offset into the
swap. Unmapped pages return a null PFN. This allows determining
@ -64,6 +70,11 @@ There are three components to pagemap:
22. THP
23. BALLOON
24. ZERO_PAGE
25. IDLE
* /proc/kpagecgroup. This file contains a 64-bit inode number of the
memory cgroup each page is charged to, indexed by PFN. Only available when
CONFIG_MEMCG is set.
Short descriptions to the page flags:
@ -110,6 +121,12 @@ Short descriptions to the page flags:
24. ZERO_PAGE
zero page for pfn_zero or huge_zero page
25. IDLE
page has not been accessed since it was marked idle (see
Documentation/vm/idle_page_tracking.txt). Note that this flag may be
stale in case the page was accessed via a PTE. To make sure the flag
is up-to-date one has to read /sys/kernel/mm/page_idle/bitmap first.
[IO related page flags]
1. ERROR IO error occurred
3. UPTODATE page has up-to-date data
@ -159,3 +176,8 @@ Other notes:
Reading from any of the files will return -EINVAL if you are not starting
the read on an 8-byte boundary (e.g., if you sought an odd number of bytes
into the file), or if the size of the read is not a multiple of 8 bytes.
Before Linux 3.11 pagemap bits 55-60 were used for "page-shift" (which is
always 12 at most architectures). Since Linux 3.11 their meaning changes
after first clear of soft-dirty bits. Since Linux 4.2 they are used for
flags unconditionally.

View File

@ -32,7 +32,7 @@ can also be enabled and disabled at runtime using the sysfs interface.
An example command to enable zswap at runtime, assuming sysfs is mounted
at /sys, is:
echo 1 > /sys/modules/zswap/parameters/enabled
echo 1 > /sys/module/zswap/parameters/enabled
When zswap is disabled at runtime it will stop storing pages that are
being swapped out. However, it will _not_ immediately write out or fault
@ -49,14 +49,26 @@ Zswap receives pages for compression through the Frontswap API and is able to
evict pages from its own compressed pool on an LRU basis and write them back to
the backing swap device in the case that the compressed pool is full.
Zswap makes use of zbud for the managing the compressed memory pool. Each
allocation in zbud is not directly accessible by address. Rather, a handle is
Zswap makes use of zpool for the managing the compressed memory pool. Each
allocation in zpool is not directly accessible by address. Rather, a handle is
returned by the allocation routine and that handle must be mapped before being
accessed. The compressed memory pool grows on demand and shrinks as compressed
pages are freed. The pool is not preallocated.
pages are freed. The pool is not preallocated. By default, a zpool of type
zbud is created, but it can be selected at boot time by setting the "zpool"
attribute, e.g. zswap.zpool=zbud. It can also be changed at runtime using the
sysfs "zpool" attribute, e.g.
echo zbud > /sys/module/zswap/parameters/zpool
The zbud type zpool allocates exactly 1 page to store 2 compressed pages, which
means the compression ratio will always be 2:1 or worse (because of half-full
zbud pages). The zsmalloc type zpool has a more complex compressed page
storage method, and it can achieve greater storage densities. However,
zsmalloc does not implement compressed page eviction, so once zswap fills it
cannot evict the oldest page, it can only reject new pages.
When a swap page is passed from frontswap to zswap, zswap maintains a mapping
of the swap entry, a combination of the swap type and swap offset, to the zbud
of the swap entry, a combination of the swap type and swap offset, to the zpool
handle that references that compressed swap page. This mapping is achieved
with a red-black tree per swap type. The swap offset is the search key for the
tree nodes.
@ -74,9 +86,17 @@ controlled policy:
* max_pool_percent - The maximum percentage of memory that the compressed
pool can occupy.
Zswap allows the compressor to be selected at kernel boot time by setting the
“compressor” attribute. The default compressor is lzo. e.g.
zswap.compressor=deflate
The default compressor is lzo, but it can be selected at boot time by setting
the “compressor” attribute, e.g. zswap.compressor=lzo. It can also be changed
at runtime using the sysfs "compressor" attribute, e.g.
echo lzo > /sys/module/zswap/parameters/compressor
When the zpool and/or compressor parameter is changed at runtime, any existing
compressed pages are not modified; they are left in their own zpool. When a
request is made for a page in an old zpool, it is uncompressed using its
original compressor. Once all pages are removed from an old zpool, the zpool
and its compressor are freed.
A debugfs interface is provided for various statistic about pool size, number
of pages stored, and various counters for the reasons pages are rejected.

View File

@ -41,6 +41,7 @@ static void term(int sig)
int main(int argc, char *argv[])
{
int flags;
unsigned int ping_rate = 1;
fd = open("/dev/watchdog", O_WRONLY);
@ -63,22 +64,33 @@ int main(int argc, char *argv[])
fprintf(stderr, "Watchdog card enabled.\n");
fflush(stderr);
goto end;
} else if (!strncasecmp(argv[1], "-t", 2) && argv[2]) {
flags = atoi(argv[2]);
ioctl(fd, WDIOC_SETTIMEOUT, &flags);
fprintf(stderr, "Watchdog timeout set to %u seconds.\n", flags);
fflush(stderr);
goto end;
} else if (!strncasecmp(argv[1], "-p", 2) && argv[2]) {
ping_rate = strtoul(argv[2], NULL, 0);
fprintf(stderr, "Watchdog ping rate set to %u seconds.\n", ping_rate);
fflush(stderr);
} else {
fprintf(stderr, "-d to disable, -e to enable.\n");
fprintf(stderr, "-d to disable, -e to enable, -t <n> to set " \
"the timeout,\n-p <n> to set the ping rate, and \n");
fprintf(stderr, "run by itself to tick the card.\n");
fflush(stderr);
goto end;
}
} else {
fprintf(stderr, "Watchdog Ticking Away!\n");
fflush(stderr);
}
fprintf(stderr, "Watchdog Ticking Away!\n");
fflush(stderr);
signal(SIGINT, term);
while(1) {
keep_alive();
sleep(1);
sleep(ping_rate);
}
end:
close(fd);

View File

@ -1905,6 +1905,12 @@ L: linux-mtd@lists.infradead.org
S: Supported
F: drivers/mtd/nand/atmel_nand*
ATMEL SDMMC DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-mmc@vger.kernel.org
S: Supported
F: drivers/mmc/host/sdhci-of-at91.c
ATMEL SPI DRIVER
M: Nicolas Ferre <nicolas.ferre@atmel.com>
S: Supported
@ -2621,6 +2627,15 @@ S: Supported
F: Documentation/filesystems/ceph.txt
F: fs/ceph/
CERTIFICATE HANDLING:
M: David Howells <dhowells@redhat.com>
M: David Woodhouse <dwmw2@infradead.org>
L: keyrings@linux-nfs.org
S: Maintained
F: Documentation/module-signing.txt
F: certs/
F: scripts/extract-cert.c
CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
L: linux-usb@vger.kernel.org
S: Orphan
@ -5326,6 +5341,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma.git
S: Supported
F: Documentation/infiniband/
F: drivers/infiniband/
F: drivers/staging/rdma/
F: include/uapi/linux/if_infiniband.h
F: include/uapi/rdma/
F: include/rdma/
@ -5583,7 +5599,7 @@ IPATH DRIVER
M: Mike Marciniszyn <infinipath@intel.com>
L: linux-rdma@vger.kernel.org
S: Maintained
F: drivers/infiniband/hw/ipath/
F: drivers/staging/rdma/ipath/
IPMI SUBSYSTEM
M: Corey Minyard <minyard@acm.org>
@ -5994,7 +6010,7 @@ F: kernel/kexec.c
KEYS/KEYRINGS:
M: David Howells <dhowells@redhat.com>
L: keyrings@linux-nfs.org
L: keyrings@vger.kernel.org
S: Maintained
F: Documentation/security/keys.txt
F: include/linux/key.h
@ -6006,7 +6022,7 @@ KEYS-TRUSTED
M: David Safford <safford@us.ibm.com>
M: Mimi Zohar <zohar@linux.vnet.ibm.com>
L: linux-security-module@vger.kernel.org
L: keyrings@linux-nfs.org
L: keyrings@vger.kernel.org
S: Supported
F: Documentation/security/keys-trusted-encrypted.txt
F: include/keys/trusted-type.h
@ -6017,7 +6033,7 @@ KEYS-ENCRYPTED
M: Mimi Zohar <zohar@linux.vnet.ibm.com>
M: David Safford <safford@us.ibm.com>
L: linux-security-module@vger.kernel.org
L: keyrings@linux-nfs.org
L: keyrings@vger.kernel.org
S: Supported
F: Documentation/security/keys-trusted-encrypted.txt
F: include/keys/encrypted-type.h
@ -6220,6 +6236,7 @@ Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
S: Supported
F: drivers/nvdimm/pmem.c
F: include/linux/pmem.h
F: arch/*/include/asm/pmem.h
LINUX FOR IBM pSERIES (RS/6000)
M: Paul Mackerras <paulus@au.ibm.com>
@ -6772,6 +6789,14 @@ W: http://www.mellanox.com
Q: http://patchwork.ozlabs.org/project/netdev/list/
F: drivers/net/ethernet/mellanox/mlxsw/
MEMBARRIER SUPPORT
M: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: kernel/membarrier.c
F: include/uapi/linux/membarrier.h
MEMORY MANAGEMENT
L: linux-mm@kvack.org
W: http://www.linux-mm.org
@ -6837,6 +6862,12 @@ T: git git://git.monstr.eu/linux-2.6-microblaze.git
S: Supported
F: arch/microblaze/
MICROSOFT SURFACE PRO 3 BUTTON DRIVER
M: Chen Yu <yu.c.chen@intel.com>
L: platform-driver-x86@vger.kernel.org
S: Supported
F: drivers/platform/x86/surfacepro3_button.c
MICROTEK X6 SCANNER
M: Oliver Neukum <oliver@neukum.org>
S: Maintained
@ -7354,7 +7385,7 @@ F: drivers/scsi/nsp32*
NIOS2 ARCHITECTURE
M: Ley Foon Tan <lftan@altera.com>
L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
T: git git://git.rocketboards.org/linux-socfpga-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git
S: Maintained
F: arch/nios2/
@ -7373,6 +7404,7 @@ NTB DRIVER CORE
M: Jon Mason <jdmason@kudzu.us>
M: Dave Jiang <dave.jiang@intel.com>
M: Allen Hubbe <Allen.Hubbe@emc.com>
L: linux-ntb@googlegroups.com
S: Supported
W: https://github.com/jonmason/ntb/wiki
T: git git://github.com/jonmason/ntb.git
@ -7384,6 +7416,7 @@ F: include/linux/ntb_transport.h
NTB INTEL DRIVER
M: Jon Mason <jdmason@kudzu.us>
M: Dave Jiang <dave.jiang@intel.com>
L: linux-ntb@googlegroups.com
S: Supported
W: https://github.com/jonmason/ntb/wiki
T: git git://github.com/jonmason/ntb.git
@ -8176,10 +8209,9 @@ F: drivers/hwmon/pmbus/
F: include/linux/i2c/pmbus.h
PMC SIERRA MaxRAID DRIVER
M: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
L: linux-scsi@vger.kernel.org
W: http://www.pmc-sierra.com/
S: Supported
S: Orphan
F: drivers/scsi/pmcraid.*
PMC SIERRA PM8001 DRIVER
@ -9264,6 +9296,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
S: Supported
F: security/apparmor/
YAMA SECURITY MODULE
M: Kees Cook <keescook@chromium.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git yama/tip
S: Supported
F: security/yama/
SENSABLE PHANTOM
M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
@ -9948,6 +9986,12 @@ M: Arnaud Patard <arnaud.patard@rtp-net.org>
S: Odd Fixes
F: drivers/staging/xgifb/
HFI1 DRIVER
M: Mike Marciniszyn <infinipath@intel.com>
L: linux-rdma@vger.kernel.org
S: Supported
F: drivers/staging/rdma/hfi1
STARFIRE/DURALAN NETWORK DRIVER
M: Ion Badulescu <ionut@badula.org>
S: Odd Fixes
@ -10473,7 +10517,6 @@ F: drivers/platform/x86/toshiba_haps.c
TOSHIBA SMM DRIVER
M: Jonathan Buzzard <jonathan@buzzard.org.uk>
L: tlinux-users@tce.toshiba-dme.co.jp
W: http://www.buzzard.org.uk/toshiba/
S: Maintained
F: drivers/char/toshiba.c

View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 2
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION =
EXTRAVERSION = -rc1
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
@ -666,14 +666,7 @@ endif
endif
KBUILD_CFLAGS += $(stackp-flag)
ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
COMPILER := clang
else
COMPILER := gcc
endif
export COMPILER
ifeq ($(COMPILER),clang)
ifeq ($(cc-name),clang)
KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
KBUILD_CPPFLAGS += $(call cc-option,-Wno-unknown-warning-option,)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable)
@ -875,10 +868,9 @@ INITRD_COMPRESS-$(CONFIG_RD_LZ4) := lz4
# export INITRD_COMPRESS := $(INITRD_COMPRESS-y)
ifdef CONFIG_MODULE_SIG_ALL
MODSECKEY = ./signing_key.priv
MODPUBKEY = ./signing_key.x509
export MODPUBKEY
mod_sign_cmd = perl $(srctree)/scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODSECKEY) $(MODPUBKEY)
$(eval $(call config_filename,MODULE_SIG_KEY))
mod_sign_cmd = scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODULE_SIG_KEY_SRCPREFIX)$(CONFIG_MODULE_SIG_KEY) certs/signing_key.x509
else
mod_sign_cmd = true
endif
@ -886,7 +878,7 @@ export mod_sign_cmd
ifeq ($(KBUILD_EXTMOD),)
core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
$(core-y) $(core-m) $(drivers-y) $(drivers-m) \
@ -1178,8 +1170,8 @@ MRPROPER_DIRS += include/config usr/include include/generated \
arch/*/include/generated .tmp_objdiff
MRPROPER_FILES += .config .config.old .version .old_version \
Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
signing_key.priv signing_key.x509 x509.genkey \
extra_certificates signing_key.x509.keyid \
signing_key.pem signing_key.priv signing_key.x509 \
x509.genkey extra_certificates signing_key.x509.keyid \
signing_key.x509.signer vmlinux-gdb.py
# clean - Delete most, but leave enough to build external modules
@ -1433,6 +1425,7 @@ clean: $(clean-dirs)
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '*.ko.*' \
-o -name '*.dwo' \
-o -name '*.su' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \

View File

@ -2,6 +2,9 @@
# General architecture dependent options
#
config KEXEC_CORE
bool
config OPROFILE
tristate "OProfile system profiling"
depends on PROFILING

View File

@ -12,42 +12,6 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
#include <asm-generic/dma-mapping-common.h>
#define dma_alloc_coherent(d,s,h,f) dma_alloc_attrs(d,s,h,f,NULL)
static inline void *dma_alloc_attrs(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp,
struct dma_attrs *attrs)
{
return get_dma_ops(dev)->alloc(dev, size, dma_handle, gfp, attrs);
}
#define dma_free_coherent(d,s,c,h) dma_free_attrs(d,s,c,h,NULL)
static inline void dma_free_attrs(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle,
struct dma_attrs *attrs)
{
get_dma_ops(dev)->free(dev, size, vaddr, dma_handle, attrs);
}
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return get_dma_ops(dev)->mapping_error(dev, dma_addr);
}
static inline int dma_supported(struct device *dev, u64 mask)
{
return get_dma_ops(dev)->dma_supported(dev, mask);
}
static inline int dma_set_mask(struct device *dev, u64 mask)
{
return get_dma_ops(dev)->set_dma_mask(dev, mask);
}
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
#define dma_cache_sync(dev, va, size, dir) ((void)0)
#endif /* _ALPHA_DMA_MAPPING_H */

View File

@ -166,15 +166,6 @@ static int alpha_noop_supported(struct device *dev, u64 mask)
return mask < 0x00ffffffUL ? 0 : 1;
}
static int alpha_noop_set_mask(struct device *dev, u64 mask)
{
if (!dev->dma_mask || !dma_supported(dev, mask))
return -EIO;
*dev->dma_mask = mask;
return 0;
}
struct dma_map_ops alpha_noop_ops = {
.alloc = alpha_noop_alloc_coherent,
.free = alpha_noop_free_coherent,
@ -182,7 +173,6 @@ struct dma_map_ops alpha_noop_ops = {
.map_sg = alpha_noop_map_sg,
.mapping_error = alpha_noop_mapping_error,
.dma_supported = alpha_noop_supported,
.set_dma_mask = alpha_noop_set_mask,
};
struct dma_map_ops *dma_ops = &alpha_noop_ops;

View File

@ -939,16 +939,6 @@ static int alpha_pci_mapping_error(struct device *dev, dma_addr_t dma_addr)
return dma_addr == 0;
}
static int alpha_pci_set_mask(struct device *dev, u64 mask)
{
if (!dev->dma_mask ||
!pci_dma_supported(alpha_gendev_to_pci(dev), mask))
return -EIO;
*dev->dma_mask = mask;
return 0;
}
struct dma_map_ops alpha_pci_ops = {
.alloc = alpha_pci_alloc_coherent,
.free = alpha_pci_free_coherent,
@ -958,7 +948,6 @@ struct dma_map_ops alpha_pci_ops = {
.unmap_sg = alpha_pci_unmap_sg,
.mapping_error = alpha_pci_mapping_error,
.dma_supported = alpha_pci_supported,
.set_dma_mask = alpha_pci_set_mask,
};
struct dma_map_ops *dma_ops = &alpha_pci_ops;

View File

@ -402,6 +402,8 @@ static void __init axs103_early_init(void)
unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F;
if (num_cores > 2)
arc_set_core_freq(50 * 1000000);
else if (num_cores == 2)
arc_set_core_freq(75 * 1000000);
#endif
switch (arc_get_core_freq()/1000000) {

View File

@ -2020,6 +2020,7 @@ config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on (!SMP || PM_SLEEP_SMP)
depends on !CPU_V7M
select KEXEC_CORE
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot

View File

@ -57,5 +57,5 @@ extern char * strstr(const char * s1, const char *s2);
int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
{
return decompress(input, len, NULL, NULL, output, NULL, error);
return __decompress(input, len, NULL, NULL, output, 0, NULL, error);
}

View File

@ -358,6 +358,8 @@
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "rtc";
clocks = <&clk_32768_ck>;
clock-names = "int-clk";
status = "disabled";
};

View File

@ -112,6 +112,13 @@
clock-frequency = <12000000>;
};
/* fixed 32k external oscillator clock */
clk_32k_rtc: clk_32k_rtc {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
sound0: sound@0 {
compatible = "simple-audio-card";
simple-audio-card,name = "AM437x-GP-EVM";
@ -941,3 +948,9 @@
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&rtc {
clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
clock-names = "ext-clk", "int-clk";
status = "okay";
};

View File

@ -110,6 +110,13 @@
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
};
};
/* fixed 32k external oscillator clock */
clk_32k_rtc: clk_32k_rtc {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
};
&am43xx_pinmux {
@ -394,6 +401,8 @@
};
&rtc {
clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
clock-names = "ext-clk", "int-clk";
status = "okay";
};

View File

@ -24,6 +24,13 @@
display0 = &lcd0;
};
/* fixed 32k external oscillator clock */
clk_32k_rtc: clk_32k_rtc {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
@ -697,6 +704,8 @@
};
&rtc {
clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
clock-names = "ext-clk", "int-clk";
status = "okay";
};

View File

@ -116,6 +116,21 @@
min-microvolt = <1100000>;
max-microvolt = <2700000>;
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Correspond to 500MHz at freq_table */
cooling-device = <&cpu0 5 5>;
};
map1 {
/* Correspond to 200MHz at freq_table */
cooling-device = <&cpu0 8 8>;
};
};
};
};
};
&adc {
@ -141,6 +156,10 @@
};
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&exynos_usbphy {
status = "okay";
};

View File

@ -107,6 +107,21 @@
min-microvolt = <1100000>;
max-microvolt = <2700000>;
};
thermal-zones {
cpu_thermal: cpu-thermal {
cooling-maps {
map0 {
/* Corresponds to 500MHz */
cooling-device = <&cpu0 5 5>;
};
map1 {
/* Corresponds to 200MHz */
cooling-device = <&cpu0 8 8>;
};
};
};
};
};
&adc {
@ -132,6 +147,10 @@
};
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&exynos_usbphy {
status = "okay";
};

View File

@ -53,6 +53,22 @@
compatible = "arm,cortex-a7";
reg = <0>;
clock-frequency = <1000000000>;
clocks = <&cmu CLK_ARM_CLK>;
clock-names = "cpu";
#cooling-cells = <2>;
operating-points = <
1000000 1150000
900000 1112500
800000 1075000
700000 1037500
600000 1000000
500000 962500
400000 925000
300000 887500
200000 850000
100000 850000
>;
};
cpu1: cpu@1 {

View File

@ -702,6 +702,7 @@
clocks = <&clock CLK_JPEG>;
clock-names = "jpeg";
power-domains = <&pd_cam>;
iommus = <&sysmmu_jpeg>;
};
hdmi: hdmi@12D00000 {

View File

@ -30,6 +30,9 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
@ -39,6 +42,84 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA01>;
operating-points-v2 = <&cpu0_opp_table>;
};
};
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
opp01 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
opp02 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <925000>;
clock-latency-ns = <200000>;
};
opp03 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <950000>;
clock-latency-ns = <200000>;
};
opp04 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <975000>;
clock-latency-ns = <200000>;
};
opp05 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <987500>;
clock-latency-ns = <200000>;
};
opp06 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <200000>;
};
opp07 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1037500>;
clock-latency-ns = <200000>;
};
opp08 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1087500>;
clock-latency-ns = <200000>;
};
opp09 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1137500>;
clock-latency-ns = <200000>;
};
opp10 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1187500>;
clock-latency-ns = <200000>;
};
opp11 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1250000>;
clock-latency-ns = <200000>;
};
opp12 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1287500>;
clock-latency-ns = <200000>;
};
opp13 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1350000>;
clock-latency-ns = <200000>;
turbo-mode;
};
};
};

View File

@ -107,6 +107,10 @@
};
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
/* RSTN signal for eMMC */
&sd1_cd {
samsung,pin-pud = <0>;

View File

@ -13,6 +13,7 @@
/dts-v1/;
#include "exynos4412-odroid-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Hardkernel ODROID-U3 board based on Exynos4412";
@ -61,3 +62,10 @@
"Speakers", "SPKL",
"Speakers", "SPKR";
};
&spi_1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};

View File

@ -78,6 +78,10 @@
};
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&fimd {
pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
pinctrl-names = "default";

View File

@ -288,6 +288,10 @@
status = "okay";
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&csis_0 {
status = "okay";
vddcore-supply = <&ldo8_reg>;

View File

@ -30,6 +30,9 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA00>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
cooling-min-level = <13>;
cooling-max-level = <7>;
#cooling-cells = <2>; /* min followed by max */
@ -39,18 +42,98 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA01>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu@A02 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA02>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu@A03 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA03>;
operating-points-v2 = <&cpu0_opp_table>;
};
};
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
opp01 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
opp02 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <925000>;
clock-latency-ns = <200000>;
};
opp03 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <950000>;
clock-latency-ns = <200000>;
};
opp04 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <975000>;
clock-latency-ns = <200000>;
};
opp05 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <987500>;
clock-latency-ns = <200000>;
};
opp06 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <200000>;
};
opp07 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1037500>;
clock-latency-ns = <200000>;
};
opp08 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1087500>;
clock-latency-ns = <200000>;
};
opp09 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1137500>;
clock-latency-ns = <200000>;
};
opp10 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1187500>;
clock-latency-ns = <200000>;
};
opp11 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1250000>;
clock-latency-ns = <200000>;
};
opp12 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1287500>;
clock-latency-ns = <200000>;
};
opp13 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1350000>;
clock-latency-ns = <200000>;
turbo-mode;
};
};

View File

@ -117,6 +117,10 @@
};
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&dp {
status = "okay";
samsung,color-space = <0>;

View File

@ -74,6 +74,10 @@
};
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&dp {
samsung,color-space = <0>;
samsung,dynamic-range = <0>;

View File

@ -235,6 +235,10 @@
};
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&dp {
status = "okay";
pinctrl-names = "default";
@ -688,6 +692,7 @@
status = "okay";
samsung,spi-src-clk = <0>;
num-cs = <1>;
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
};
&usbdrd_dwc3 {

View File

@ -65,6 +65,10 @@
};
};
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
&dp {
status = "okay";
pinctrl-names = "default";

View File

@ -62,6 +62,28 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1700000000>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
clock-latency = <140000>;
operating-points = <
1700000 1300000
1600000 1250000
1500000 1225000
1400000 1200000
1300000 1150000
1200000 1125000
1100000 1100000
1000000 1075000
900000 1050000
800000 1025000
700000 1012500
600000 1000000
500000 975000
400000 950000
300000 937500
200000 925000
>;
cooling-min-level = <15>;
cooling-max-level = <9>;
#cooling-cells = <2>; /* min followed by max */

View File

@ -0,0 +1,81 @@
/*
* SAMSUNG EXYNOS5422 SoC cpu device tree source
*
* Copyright (c) 2015 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* The only difference between EXYNOS5422 and EXYNOS5800 is cpu ordering. The
* EXYNOS5422 is booting from Cortex-A7 core while the EXYNOS5800 is booting
* from Cortex-A15 core.
*
* EXYNOS5422 based board files can include this file to provide cpu ordering
* which could boot a cortex-a7 from cpu0.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
&cpu0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
};
&cpu1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
};
&cpu2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x102>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
};
&cpu3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x103>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
};
&cpu4 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
};
&cpu5 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
};
&cpu6 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x2>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
};
&cpu7 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x3>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
};

View File

@ -15,6 +15,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5800.dtsi"
#include "exynos5422-cpus.dtsi"
#include "exynos5422-cpu-thermal.dtsi"
/ {

View File

@ -4,6 +4,14 @@
model = "CompuLab CM-QS600";
compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
aliases {
serial0 = &gsbi7_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinctrl@800000 {
i2c1_pins: i2c1 {

View File

@ -10,6 +10,10 @@
serial1 = &gsbi6_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
pinctrl@800000 {
card_detect: card_detect {

View File

@ -6,6 +6,14 @@
model = "Qualcomm APQ8074 Dragonboard";
compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
serial@f991e000 {
status = "ok";

View File

@ -5,6 +5,14 @@
model = "Qualcomm APQ8084/IFC6540";
compatible = "qcom,apq8084-ifc6540", "qcom,apq8084";
aliases {
serial0 = &blsp2_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
serial@f995e000 {
status = "okay";

View File

@ -5,6 +5,14 @@
model = "Qualcomm APQ 8084-MTP";
compatible = "qcom,apq8084-mtp", "qcom,apq8084";
aliases {
serial0 = &blsp2_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
serial@f995e000 {
status = "okay";

View File

@ -234,7 +234,7 @@
interrupts = <0 208 0>;
};
serial@f995e000 {
blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
interrupts = <0 114 0x0>;

View File

@ -4,6 +4,14 @@
model = "Qualcomm IPQ8064/AP148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
aliases {
serial0 = &gsbi4_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -197,7 +197,7 @@
syscon-tcsr = <&tcsr>;
serial@16340000 {
gsbi4_serial: serial@16340000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16340000 0x1000>,
<0x16300000 0x1000>;

View File

@ -6,6 +6,14 @@
model = "Qualcomm MSM8660 SURF";
compatible = "qcom,msm8660-surf", "qcom,msm8660";
aliases {
serial0 = &gsbi12_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
gsbi@19c00000 {
status = "ok";

View File

@ -98,7 +98,7 @@
syscon-tcsr = <&tcsr>;
serial@19c40000 {
gsbi12_serial: serial@19c40000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;

Some files were not shown because too many files have changed in this diff Show More