net: phylink: Add phylink_{printk, err, warn, info, dbg} macros
With the latest addition to the PHYLINK infrastructure, we are faced with a decision on when to print necessary info using the struct net_device and when with the struct device. Add a series of macros that encapsulate this decision and replace all uses of netdev_err&co with phylink_err. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
43de61959b
commit
17091180b1
|
@ -68,6 +68,23 @@ struct phylink {
|
|||
struct sfp_bus *sfp_bus;
|
||||
};
|
||||
|
||||
#define phylink_printk(level, pl, fmt, ...) \
|
||||
do { \
|
||||
if ((pl)->config->type == PHYLINK_NETDEV) \
|
||||
netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \
|
||||
else if ((pl)->config->type == PHYLINK_DEV) \
|
||||
dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \
|
||||
} while (0)
|
||||
|
||||
#define phylink_err(pl, fmt, ...) \
|
||||
phylink_printk(KERN_ERR, pl, fmt, ##__VA_ARGS__)
|
||||
#define phylink_warn(pl, fmt, ...) \
|
||||
phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__)
|
||||
#define phylink_info(pl, fmt, ...) \
|
||||
phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__)
|
||||
#define phylink_dbg(pl, fmt, ...) \
|
||||
phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__)
|
||||
|
||||
/**
|
||||
* phylink_set_port_modes() - set the port type modes in the ethtool mask
|
||||
* @mask: ethtool link mode mask
|
||||
|
@ -164,7 +181,7 @@ static int phylink_parse_fixedlink(struct phylink *pl,
|
|||
ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
|
||||
NULL, 0);
|
||||
if (ret != ARRAY_SIZE(prop)) {
|
||||
netdev_err(pl->netdev, "broken fixed-link?\n");
|
||||
phylink_err(pl, "broken fixed-link?\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -183,7 +200,7 @@ static int phylink_parse_fixedlink(struct phylink *pl,
|
|||
|
||||
if (pl->link_config.speed > SPEED_1000 &&
|
||||
pl->link_config.duplex != DUPLEX_FULL)
|
||||
netdev_warn(pl->netdev, "fixed link specifies half duplex for %dMbps link?\n",
|
||||
phylink_warn(pl, "fixed link specifies half duplex for %dMbps link?\n",
|
||||
pl->link_config.speed);
|
||||
|
||||
bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
|
||||
|
@ -197,7 +214,7 @@ static int phylink_parse_fixedlink(struct phylink *pl,
|
|||
if (s) {
|
||||
__set_bit(s->bit, pl->supported);
|
||||
} else {
|
||||
netdev_warn(pl->netdev, "fixed link %s duplex %dMbps not recognised\n",
|
||||
phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n",
|
||||
pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
|
||||
pl->link_config.speed);
|
||||
}
|
||||
|
@ -224,7 +241,7 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
|
|||
if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
|
||||
strcmp(managed, "in-band-status") == 0) {
|
||||
if (pl->link_an_mode == MLO_AN_FIXED) {
|
||||
netdev_err(pl->netdev,
|
||||
phylink_err(pl,
|
||||
"can't use both fixed-link and in-band-status\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
@ -272,7 +289,7 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
|
|||
break;
|
||||
|
||||
default:
|
||||
netdev_err(pl->netdev,
|
||||
phylink_err(pl,
|
||||
"incorrect link mode %s for in-band status\n",
|
||||
phy_modes(pl->link_config.interface));
|
||||
return -EINVAL;
|
||||
|
@ -281,7 +298,7 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
|
|||
linkmode_copy(pl->link_config.advertising, pl->supported);
|
||||
|
||||
if (phylink_validate(pl, pl->supported, &pl->link_config)) {
|
||||
netdev_err(pl->netdev,
|
||||
phylink_err(pl,
|
||||
"failed to validate link configuration for in-band status\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
@ -293,7 +310,7 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
|
|||
static void phylink_mac_config(struct phylink *pl,
|
||||
const struct phylink_link_state *state)
|
||||
{
|
||||
netdev_dbg(pl->netdev,
|
||||
phylink_dbg(pl,
|
||||
"%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
|
||||
__func__, phylink_an_mode_str(pl->link_an_mode),
|
||||
phy_modes(state->interface),
|
||||
|
@ -409,7 +426,7 @@ static void phylink_mac_link_up(struct phylink *pl,
|
|||
if (ndev)
|
||||
netif_carrier_on(ndev);
|
||||
|
||||
netdev_info(ndev,
|
||||
phylink_info(pl,
|
||||
"Link is Up - %s/%s - flow control %s\n",
|
||||
phy_speed_to_str(link_state.speed),
|
||||
phy_duplex_to_str(link_state.duplex),
|
||||
|
@ -424,7 +441,7 @@ static void phylink_mac_link_down(struct phylink *pl)
|
|||
netif_carrier_off(ndev);
|
||||
pl->ops->mac_link_down(pl->config, pl->link_an_mode,
|
||||
pl->phy_state.interface);
|
||||
netdev_info(ndev, "Link is Down\n");
|
||||
phylink_info(pl, "Link is Down\n");
|
||||
}
|
||||
|
||||
static void phylink_resolve(struct work_struct *w)
|
||||
|
@ -537,7 +554,7 @@ static int phylink_register_sfp(struct phylink *pl,
|
|||
if (ret == -ENOENT)
|
||||
return 0;
|
||||
|
||||
netdev_err(pl->netdev, "unable to parse \"sfp\" node: %d\n",
|
||||
phylink_err(pl, "unable to parse \"sfp\" node: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
@ -670,7 +687,7 @@ static void phylink_phy_change(struct phy_device *phydev, bool up,
|
|||
|
||||
phylink_run_resolve(pl);
|
||||
|
||||
netdev_dbg(pl->netdev, "phy link %s %s/%s/%s\n", up ? "up" : "down",
|
||||
phylink_dbg(pl, "phy link %s %s/%s/%s\n", up ? "up" : "down",
|
||||
phy_modes(phydev->interface),
|
||||
phy_speed_to_str(phydev->speed),
|
||||
phy_duplex_to_str(phydev->duplex));
|
||||
|
@ -706,7 +723,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
|
|||
phy->phylink = pl;
|
||||
phy->phy_link_change = phylink_phy_change;
|
||||
|
||||
netdev_info(pl->netdev,
|
||||
phylink_info(pl,
|
||||
"PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev),
|
||||
phy->drv->name);
|
||||
|
||||
|
@ -721,7 +738,7 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
|
|||
mutex_unlock(&pl->state_mutex);
|
||||
mutex_unlock(&phy->lock);
|
||||
|
||||
netdev_dbg(pl->netdev,
|
||||
phylink_dbg(pl,
|
||||
"phy: setting supported %*pb advertising %*pb\n",
|
||||
__ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
|
||||
__ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising);
|
||||
|
@ -902,7 +919,7 @@ void phylink_mac_change(struct phylink *pl, bool up)
|
|||
if (!up)
|
||||
pl->mac_link_dropped = true;
|
||||
phylink_run_resolve(pl);
|
||||
netdev_dbg(pl->netdev, "mac link %s\n", up ? "up" : "down");
|
||||
phylink_dbg(pl, "mac link %s\n", up ? "up" : "down");
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(phylink_mac_change);
|
||||
|
||||
|
@ -918,7 +935,7 @@ void phylink_start(struct phylink *pl)
|
|||
{
|
||||
ASSERT_RTNL();
|
||||
|
||||
netdev_info(pl->netdev, "configuring for %s/%s link mode\n",
|
||||
phylink_info(pl, "configuring for %s/%s link mode\n",
|
||||
phylink_an_mode_str(pl->link_an_mode),
|
||||
phy_modes(pl->link_config.interface));
|
||||
|
||||
|
@ -1631,14 +1648,14 @@ static int phylink_sfp_module_insert(void *upstream,
|
|||
/* Ignore errors if we're expecting a PHY to attach later */
|
||||
ret = phylink_validate(pl, support, &config);
|
||||
if (ret) {
|
||||
netdev_err(pl->netdev, "validation with support %*pb failed: %d\n",
|
||||
phylink_err(pl, "validation with support %*pb failed: %d\n",
|
||||
__ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
|
||||
if (iface == PHY_INTERFACE_MODE_NA) {
|
||||
netdev_err(pl->netdev,
|
||||
phylink_err(pl,
|
||||
"selection of interface failed, advertisement %*pb\n",
|
||||
__ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising);
|
||||
return -EINVAL;
|
||||
|
@ -1647,14 +1664,14 @@ static int phylink_sfp_module_insert(void *upstream,
|
|||
config.interface = iface;
|
||||
ret = phylink_validate(pl, support, &config);
|
||||
if (ret) {
|
||||
netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
|
||||
phylink_err(pl, "validation of %s/%s with support %*pb failed: %d\n",
|
||||
phylink_an_mode_str(MLO_AN_INBAND),
|
||||
phy_modes(config.interface),
|
||||
__ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
netdev_dbg(pl->netdev, "requesting link mode %s/%s with support %*pb\n",
|
||||
phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
|
||||
phylink_an_mode_str(MLO_AN_INBAND),
|
||||
phy_modes(config.interface),
|
||||
__ETHTOOL_LINK_MODE_MASK_NBITS, support);
|
||||
|
@ -1676,7 +1693,7 @@ static int phylink_sfp_module_insert(void *upstream,
|
|||
|
||||
changed = true;
|
||||
|
||||
netdev_info(pl->netdev, "switched to %s/%s link mode\n",
|
||||
phylink_info(pl, "switched to %s/%s link mode\n",
|
||||
phylink_an_mode_str(MLO_AN_INBAND),
|
||||
phy_modes(config.interface));
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue