Merge branch 'sh/st-integration' into sh-latest

Documentation/arm/Booting

@@ -65,13 +65,19 @@ looks at the connected hardware is beyond the scope of this document.
 The boot loader must ultimately be able to provide a MACH_TYPE_xxx
 value to the kernel. (see linux/arch/arm/tools/mach-types).
 
-
+4. Setup boot data
-4. Setup the kernel tagged list
+------------------
--------------------------------
 
 Existing boot loaders:		OPTIONAL, HIGHLY RECOMMENDED
 New boot loaders:		MANDATORY
 
+The boot loader must provide either a tagged list or a dtb image for
+passing configuration data to the kernel.  The physical address of the
+boot data is passed to the kernel in register r2.
+
+4a. Setup the kernel tagged list
+--------------------------------
+
 The boot loader must create and initialise the kernel tagged list.
 A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE.
 The ATAG_CORE tag may or may not be empty.  An empty ATAG_CORE tag
@@ -101,6 +107,24 @@ The tagged list must be placed in a region of memory where neither
 the kernel decompressor nor initrd 'bootp' program will overwrite
 it.  The recommended placement is in the first 16KiB of RAM.
 
+4b. Setup the device tree
+-------------------------
+
+The boot loader must load a device tree image (dtb) into system ram
+at a 64bit aligned address and initialize it with the boot data.  The
+dtb format is documented in Documentation/devicetree/booting-without-of.txt.
+The kernel will look for the dtb magic value of 0xd00dfeed at the dtb
+physical address to determine if a dtb has been passed instead of a
+tagged list.
+
+The boot loader must pass at a minimum the size and location of the
+system memory, and the root filesystem location.  The dtb must be
+placed in a region of memory where the kernel decompressor will not
+overwrite it.  The recommended placement is in the first 16KiB of RAM
+with the caveat that it may not be located at physical address 0 since
+the kernel interprets a value of 0 in r2 to mean neither a tagged list
+nor a dtb were passed.
+
 5. Calling the kernel image
 ---------------------------
 
@@ -125,7 +149,8 @@ In either case, the following conditions must be met:
 - CPU register settings
   r0 = 0,
   r1 = machine type number discovered in (3) above.
-  r2 = physical address of tagged list in system RAM.
+  r2 = physical address of tagged list in system RAM, or
+       physical address of device tree block (dtb) in system RAM
 
 - CPU mode
   All forms of interrupts must be disabled (IRQs and FIQs)

Documentation/devicetree/booting-without-of.txt

@@ -13,7 +13,7 @@ Table of Contents
 
   I - Introduction
     1) Entry point for arch/powerpc
-    2) Board support
+    2) Entry point for arch/arm
 
   II - The DT block format
     1) Header
@@ -41,13 +41,6 @@ Table of Contents
   VI - System-on-a-chip devices and nodes
     1) Defining child nodes of an SOC
     2) Representing devices without a current OF specification
-      a) PHY nodes
-      b) Interrupt controllers
-      c) 4xx/Axon EMAC ethernet nodes
-      d) Xilinx IP cores
-      e) USB EHCI controllers
-      f) MDIO on GPIOs
-      g) SPI busses
 
   VII - Specifying interrupt information for devices
     1) interrupts property
@@ -123,7 +116,7 @@ Revision Information
 I - Introduction
 ================
 
-During the recent development of the Linux/ppc64 kernel, and more
+During the development of the Linux/ppc64 kernel, and more
 specifically, the addition of new platform types outside of the old
 IBM pSeries/iSeries pair, it was decided to enforce some strict rules
 regarding the kernel entry and bootloader <-> kernel interfaces, in
@@ -146,7 +139,7 @@ section III, but, for example, the kernel does not require you to
 create a node for every PCI device in the system. It is a requirement
 to have a node for PCI host bridges in order to provide interrupt
 routing informations and memory/IO ranges, among others. It is also
-recommended to define nodes for on chip devices and other busses that
+recommended to define nodes for on chip devices and other buses that
 don't specifically fit in an existing OF specification. This creates a
 great flexibility in the way the kernel can then probe those and match
 drivers to device, without having to hard code all sorts of tables. It
@@ -158,7 +151,7 @@ it with special cases.
 1) Entry point for arch/powerpc
 -------------------------------
 
-   There is one and one single entry point to the kernel, at the start
+   There is one single entry point to the kernel, at the start
    of the kernel image. That entry point supports two calling
    conventions:
 
@@ -210,12 +203,6 @@ it with special cases.
         with all CPUs. The way to do that with method b) will be
         described in a later revision of this document.
 
-
-2) Board support
-----------------
-
-64-bit kernels:
-
    Board supports (platforms) are not exclusive config options. An
    arbitrary set of board supports can be built in a single kernel
    image. The kernel will "know" what set of functions to use for a
@@ -234,47 +221,49 @@ it with special cases.
         containing the various callbacks that the generic code will
         use to get to your platform specific code
 
-        c) Add a reference to your "ppc_md" structure in the
+  A kernel image may support multiple platforms, but only if the
-        "machines" table in arch/powerpc/kernel/setup_64.c if you are
-        a 64-bit platform.
-
-        d) request and get assigned a platform number (see PLATFORM_*
-        constants in arch/powerpc/include/asm/processor.h
-
-32-bit embedded kernels:
-
-  Currently, board support is essentially an exclusive config option.
-  The kernel is configured for a single platform.  Part of the reason
-  for this is to keep kernels on embedded systems small and efficient;
-  part of this is due to the fact the code is already that way. In the
-  future, a kernel may support multiple platforms, but only if the
   platforms feature the same core architecture.  A single kernel build
   cannot support both configurations with Book E and configurations
   with classic Powerpc architectures.
 
-  32-bit embedded platforms that are moved into arch/powerpc using a
+2) Entry point for arch/arm
-  flattened device tree should adopt the merged tree practice of
+---------------------------
-  setting ppc_md up dynamically, even though the kernel is currently
-  built with support for only a single platform at a time.  This allows
-  unification of the setup code, and will make it easier to go to a
-  multiple-platform-support model in the future.
 
-NOTE: I believe the above will be true once Ben's done with the merge
+   There is one single entry point to the kernel, at the start
-of the boot sequences.... someone speak up if this is wrong!
+   of the kernel image. That entry point supports two calling
+   conventions.  A summary of the interface is described here.  A full
+   description of the boot requirements is documented in
+   Documentation/arm/Booting
 
-  To add a 32-bit embedded platform support, follow the instructions
+        a) ATAGS interface.  Minimal information is passed from firmware
-  for 64-bit platforms above, with the exception that the Kconfig
+        to the kernel with a tagged list of predefined parameters.
-  option should be set up such that the kernel builds exclusively for
-  the platform selected.  The processor type for the platform should
-  enable another config option to select the specific board
-  supported.
 
-NOTE: If Ben doesn't merge the setup files, may need to change this to
+                r0 : 0
-point to setup_32.c
 
+                r1 : Machine type number
 
-   I will describe later the boot process and various callbacks that
+                r2 : Physical address of tagged list in system RAM
-   your platform should implement.
+
+        b) Entry with a flattened device-tree block.  Firmware loads the
+        physical address of the flattened device tree block (dtb) into r2,
+        r1 is not used, but it is considered good practise to use a valid
+        machine number as described in Documentation/arm/Booting.
+
+                r0 : 0
+
+                r1 : Valid machine type number.  When using a device tree,
+                a single machine type number will often be assigned to
+                represent a class or family of SoCs.
+
+                r2 : physical pointer to the device-tree block
+                (defined in chapter II) in RAM.  Device tree can be located
+                anywhere in system RAM, but it should be aligned on a 32 bit
+                boundary.
+
+   The kernel will differentiate between ATAGS and device tree booting by
+   reading the memory pointed to by r1 and looking for either the flattened
+   device tree block magic value (0xd00dfeed) or the ATAG_CORE value at
+   offset 0x4 from r2 (0x54410001).
 
 
 II - The DT block format
@@ -300,8 +289,8 @@ the block to RAM before passing it to the kernel.
 1) Header
 ---------
 
-   The kernel is entered with r3 pointing to an area of memory that is
+   The kernel is passed the physical address pointing to an area of memory
-   roughly described in arch/powerpc/include/asm/prom.h by the structure
+   that is roughly described in include/linux/of_fdt.h by the structure
    boot_param_header:
 
 struct boot_param_header {
@@ -339,7 +328,7 @@ struct boot_param_header {
    All values in this header are in big endian format, the various
    fields in this header are defined more precisely below. All
    "offset" values are in bytes from the start of the header; that is
-   from the value of r3.
+   from the physical base address of the device tree block.
 
    - magic
 
@@ -437,7 +426,7 @@ struct boot_param_header {
 
 
              ------------------------------
-       r3 -> |  struct boot_param_header  |
+     base -> |  struct boot_param_header  |
              ------------------------------
              |      (alignment gap) (*)   |
              ------------------------------
@@ -457,7 +446,7 @@ struct boot_param_header {
       -----> ------------------------------
       |
       |
-      --- (r3 + totalsize)
+      --- (base + totalsize)
 
   (*) The alignment gaps are not necessarily present; their presence
       and size are dependent on the various alignment requirements of
@@ -500,7 +489,7 @@ the device-tree structure. It is typically used to represent "path" in
 the device-tree. More details about the actual format of these will be
 below.
 
-The kernel powerpc generic code does not make any formal use of the
+The kernel generic code does not make any formal use of the
 unit address (though some board support code may do) so the only real
 requirement here for the unit address is to ensure uniqueness of
 the node unit name at a given level of the tree. Nodes with no notion
@@ -518,20 +507,21 @@ path to the root node is "/".
 
 Every node which actually represents an actual device (that is, a node
 which isn't only a virtual "container" for more nodes, like "/cpus"
-is) is also required to have a "device_type" property indicating the
+is) is also required to have a "compatible" property indicating the
-type of node .
+specific hardware and an optional list of devices it is fully
+backwards compatible with.
 
 Finally, every node that can be referenced from a property in another
-node is required to have a "linux,phandle" property. Real open
+node is required to have either a "phandle" or a "linux,phandle"
-firmware implementations provide a unique "phandle" value for every
+property. Real Open Firmware implementations provide a unique
-node that the "prom_init()" trampoline code turns into
+"phandle" value for every node that the "prom_init()" trampoline code
-"linux,phandle" properties. However, this is made optional if the
+turns into "linux,phandle" properties. However, this is made optional
-flattened device tree is used directly. An example of a node
+if the flattened device tree is used directly. An example of a node
 referencing another node via "phandle" is when laying out the
 interrupt tree which will be described in a further version of this
 document.
 
-This "linux, phandle" property is a 32-bit value that uniquely
+The "phandle" property is a 32-bit value that uniquely
 identifies a node. You are free to use whatever values or system of
 values, internal pointers, or whatever to generate these, the only
 requirement is that every node for which you provide that property has
@@ -694,7 +684,7 @@ made of 3 cells, the bottom two containing the actual address itself
 while the top cell contains address space indication, flags, and pci
 bus & device numbers.
 
-For busses that support dynamic allocation, it's the accepted practice
+For buses that support dynamic allocation, it's the accepted practice
 to then not provide the address in "reg" (keep it 0) though while
 providing a flag indicating the address is dynamically allocated, and
 then, to provide a separate "assigned-addresses" property that
@@ -711,7 +701,7 @@ prom_parse.c file of the recent kernels for your bus type.
 The "reg" property only defines addresses and sizes (if #size-cells is
 non-0) within a given bus. In order to translate addresses upward
 (that is into parent bus addresses, and possibly into CPU physical
-addresses), all busses must contain a "ranges" property. If the
+addresses), all buses must contain a "ranges" property. If the
 "ranges" property is missing at a given level, it's assumed that
 translation isn't possible, i.e., the registers are not visible on the
 parent bus.  The format of the "ranges" property for a bus is a list
@@ -727,9 +717,9 @@ example, for a PCI host controller, that would be a CPU address. For a
 PCI<->ISA bridge, that would be a PCI address. It defines the base
 address in the parent bus where the beginning of that range is mapped.
 
-For a new 64-bit powerpc board, I recommend either the 2/2 format or
+For new 64-bit board support, I recommend either the 2/2 format or
 Apple's 2/1 format which is slightly more compact since sizes usually
-fit in a single 32-bit word.   New 32-bit powerpc boards should use a
+fit in a single 32-bit word.   New 32-bit board support should use a
 1/1 format, unless the processor supports physical addresses greater
 than 32-bits, in which case a 2/1 format is recommended.
 
@@ -754,7 +744,7 @@ of their actual names.
 While earlier users of Open Firmware like OldWorld macintoshes tended
 to use the actual device name for the "name" property, it's nowadays
 considered a good practice to use a name that is closer to the device
-class (often equal to device_type). For example, nowadays, ethernet
+class (often equal to device_type). For example, nowadays, Ethernet
 controllers are named "ethernet", an additional "model" property
 defining precisely the chip type/model, and "compatible" property
 defining the family in case a single driver can driver more than one
@@ -772,7 +762,7 @@ is present).
 4) Note about node and property names and character set
 -------------------------------------------------------
 
-While open firmware provides more flexible usage of 8859-1, this
+While Open Firmware provides more flexible usage of 8859-1, this
 specification enforces more strict rules. Nodes and properties should
 be comprised only of ASCII characters 'a' to 'z', '0' to
 '9', ',', '.', '_', '+', '#', '?', and '-'. Node names additionally
@@ -792,7 +782,7 @@ address which can extend beyond that limit.
 --------------------------------
   These are all that are currently required. However, it is strongly
   recommended that you expose PCI host bridges as documented in the
-  PCI binding to open firmware, and your interrupt tree as documented
+  PCI binding to Open Firmware, and your interrupt tree as documented
   in OF interrupt tree specification.
 
   a) The root node
@@ -802,20 +792,12 @@ address which can extend beyond that limit.
     - model : this is your board name/model
     - #address-cells : address representation for "root" devices
     - #size-cells: the size representation for "root" devices
-    - device_type : This property shouldn't be necessary. However, if
-      you decide to create a device_type for your root node, make sure it
-      is _not_ "chrp" unless your platform is a pSeries or PAPR compliant
-      one for 64-bit, or a CHRP-type machine for 32-bit as this will
-      matched by the kernel this way.
-
-  Additionally, some recommended properties are:
-
     - compatible : the board "family" generally finds its way here,
       for example, if you have 2 board models with a similar layout,
       that typically get driven by the same platform code in the
-      kernel, you would use a different "model" property but put a
+      kernel, you would specify the exact board model in the
-      value in "compatible". The kernel doesn't directly use that
+      compatible property followed by an entry that represents the SoC
-      value but it is generally useful.
+      model.
 
   The root node is also generally where you add additional properties
   specific to your board like the serial number if any, that sort of
@@ -841,8 +823,11 @@ address which can extend beyond that limit.
 
   So under /cpus, you are supposed to create a node for every CPU on
   the machine. There is no specific restriction on the name of the
-  CPU, though It's common practice to call it PowerPC,<name>. For
+  CPU, though it's common to call it <architecture>,<core>. For
   example, Apple uses PowerPC,G5 while IBM uses PowerPC,970FX.
+  However, the Generic Names convention suggests that it would be
+  better to simply use 'cpu' for each cpu node and use the compatible
+  property to identify the specific cpu core.
 
   Required properties:
 
@@ -923,7 +908,7 @@ compatibility.
 
   e) The /chosen node
 
-  This node is a bit "special". Normally, that's where open firmware
+  This node is a bit "special". Normally, that's where Open Firmware
   puts some variable environment information, like the arguments, or
   the default input/output devices.
 
@@ -940,11 +925,7 @@ compatibility.
       console device if any. Typically, if you have serial devices on
       your board, you may want to put the full path to the one set as
       the default console in the firmware here, for the kernel to pick
-      it up as its own default console. If you look at the function
+      it up as its own default console.
-      set_preferred_console() in arch/ppc64/kernel/setup.c, you'll see
-      that the kernel tries to find out the default console and has
-      knowledge of various types like 8250 serial ports. You may want
-      to extend this function to add your own.
 
   Note that u-boot creates and fills in the chosen node for platforms
   that use it.
@@ -955,23 +936,23 @@ compatibility.
 
   f) the /soc<SOCname> node
 
-  This node is used to represent a system-on-a-chip (SOC) and must be
+  This node is used to represent a system-on-a-chip (SoC) and must be
-  present if the processor is a SOC. The top-level soc node contains
+  present if the processor is a SoC. The top-level soc node contains
-  information that is global to all devices on the SOC. The node name
+  information that is global to all devices on the SoC. The node name
-  should contain a unit address for the SOC, which is the base address
+  should contain a unit address for the SoC, which is the base address
-  of the memory-mapped register set for the SOC. The name of an soc
+  of the memory-mapped register set for the SoC. The name of an SoC
   node should start with "soc", and the remainder of the name should
   represent the part number for the soc.  For example, the MPC8540's
   soc node would be called "soc8540".
 
   Required properties:
 
-    - device_type : Should be "soc"
     - ranges : Should be defined as specified in 1) to describe the
-      translation of SOC addresses for memory mapped SOC registers.
+      translation of SoC addresses for memory mapped SoC registers.
-    - bus-frequency: Contains the bus frequency for the SOC node.
+    - bus-frequency: Contains the bus frequency for the SoC node.
       Typically, the value of this field is filled in by the boot
       loader.
+    - compatible : Exact model of the SoC
 
 
   Recommended properties:
@@ -1155,12 +1136,13 @@ while all this has been defined and implemented.
 
   - An example of code for iterating nodes & retrieving properties
     directly from the flattened tree format can be found in the kernel
-    file arch/ppc64/kernel/prom.c, look at scan_flat_dt() function,
+    file drivers/of/fdt.c.  Look at the of_scan_flat_dt() function,
     its usage in early_init_devtree(), and the corresponding various
     early_init_dt_scan_*() callbacks. That code can be re-used in a
     GPL bootloader, and as the author of that code, I would be happy
     to discuss possible free licensing to any vendor who wishes to
     integrate all or part of this code into a non-GPL bootloader.
+    (reference needed; who is 'I' here? ---gcl Jan 31, 2011)
 
 
 
@@ -1203,18 +1185,19 @@ MPC8540.
 2) Representing devices without a current OF specification
 ----------------------------------------------------------
 
-Currently, there are many devices on SOCs that do not have a standard
+Currently, there are many devices on SoCs that do not have a standard
-representation pre-defined as part of the open firmware
+representation defined as part of the Open Firmware specifications,
-specifications, mainly because the boards that contain these SOCs are
+mainly because the boards that contain these SoCs are not currently
-not currently booted using open firmware.   This section contains
+booted using Open Firmware.  Binding documentation for new devices
-descriptions for the SOC devices for which new nodes have been
+should be added to the Documentation/devicetree/bindings directory.
-defined; this list will expand as more and more SOC-containing
+That directory will expand as device tree support is added to more and
-platforms are moved over to use the flattened-device-tree model.
+more SoCs.
+
 
 VII - Specifying interrupt information for devices
 ===================================================
 
-The device tree represents the busses and devices of a hardware
+The device tree represents the buses and devices of a hardware
 system in a form similar to the physical bus topology of the
 hardware.
 

Documentation/feature-removal-schedule.txt

@@ -603,3 +603,19 @@ Why:	The adm9240, w83792d and w83793 hardware monitoring drivers have
 Who:	Jean Delvare <khali@linux-fr.org>
 
 ----------------------------
+
+What:	noswapaccount kernel command line parameter
+When:	2.6.40
+Why:	The original implementation of memsw feature enabled by
+	CONFIG_CGROUP_MEM_RES_CTLR_SWAP could be disabled by the noswapaccount
+	kernel parameter (introduced in 2.6.29-rc1). Later on, this decision
+	turned out to be not ideal because we cannot have the feature compiled
+	in and disabled by default and let only interested to enable it
+	(e.g. general distribution kernels might need it). Therefore we have
+	added swapaccount[=0|1] parameter (introduced in 2.6.37) which provides
+	the both possibilities. If we remove noswapaccount we will have
+	less command line parameters with the same functionality and we
+	can also cleanup the parameter handling a bit ().
+Who:	Michal Hocko <mhocko@suse.cz>
+
+----------------------------

Documentation/networking/ip-sysctl.txt

@@ -187,7 +187,7 @@ tcp_cookie_size - INTEGER
 tcp_dsack - BOOLEAN
 	Allows TCP to send "duplicate" SACKs.
 
-tcp_ecn - BOOLEAN
+tcp_ecn - INTEGER
 	Enable Explicit Congestion Notification (ECN) in TCP. ECN is only
 	used when both ends of the TCP flow support it. It is useful to
 	avoid losses due to congestion (when the bottleneck router supports

Documentation/scheduler/sched-stats.txt

@@ -1,3 +1,7 @@
+Version 15 of schedstats dropped counters for some sched_yield:
+yld_exp_empty, yld_act_empty and yld_both_empty. Otherwise, it is
+identical to version 14.
+
 Version 14 of schedstats includes support for sched_domains, which hit the
 mainline kernel in 2.6.20 although it is identical to the stats from version
 12 which was in the kernel from 2.6.13-2.6.19 (version 13 never saw a kernel
@@ -28,32 +32,25 @@ to write their own scripts, the fields are described here.
 
 CPU statistics
 --------------
-cpu<N> 1 2 3 4 5 6 7 8 9 10 11 12
+cpu<N> 1 2 3 4 5 6 7 8 9
 
-NOTE: In the sched_yield() statistics, the active queue is considered empty
+First field is a sched_yield() statistic:
-    if it has only one process in it, since obviously the process calling
+     1) # of times sched_yield() was called
-    sched_yield() is that process.
-
-First four fields are sched_yield() statistics:
-     1) # of times both the active and the expired queue were empty
-     2) # of times just the active queue was empty
-     3) # of times just the expired queue was empty
-     4) # of times sched_yield() was called
 
 Next three are schedule() statistics:
-     5) # of times we switched to the expired queue and reused it
+     2) # of times we switched to the expired queue and reused it
-     6) # of times schedule() was called
+     3) # of times schedule() was called
-     7) # of times schedule() left the processor idle
+     4) # of times schedule() left the processor idle
 
 Next two are try_to_wake_up() statistics:
-     8) # of times try_to_wake_up() was called
+     5) # of times try_to_wake_up() was called
-     9) # of times try_to_wake_up() was called to wake up the local cpu
+     6) # of times try_to_wake_up() was called to wake up the local cpu
 
 Next three are statistics describing scheduling latency:
-    10) sum of all time spent running by tasks on this processor (in jiffies)
+     7) sum of all time spent running by tasks on this processor (in jiffies)
-    11) sum of all time spent waiting to run by tasks on this processor (in
+     8) sum of all time spent waiting to run by tasks on this processor (in
         jiffies)
-    12) # of timeslices run on this cpu
+     9) # of timeslices run on this cpu
 
 
 Domain statistics

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -296,6 +296,7 @@ Conexant 5066
 =============
   laptop	Basic Laptop config (default)
   hp-laptop	HP laptops, e g G60
+  asus		Asus K52JU, Lenovo G560
   dell-laptop	Dell laptops
   dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5

MAINTAINERS

@@ -978,6 +978,8 @@ S:	Maintained
 F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
 F:	arch/arm/plat-s5p/
+F:	drivers/*/*s3c2410*
+F:	drivers/*/*/*s3c2410*
 
 ARM/S3C2410 ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -2772,6 +2774,15 @@ F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
 F:	include/linux/gigaset_dev.h
 
+GPIO SUBSYSTEM
+M:	Grant Likely <grant.likely@secretlab.ca>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+T:	git git://git.secretlab.ca/git/linux-2.6.git
+F:	Documentation/gpio/gpio.txt
+F:	drivers/gpio/
+F:	include/linux/gpio*
+
 GRETH 10/100/1G Ethernet MAC device driver
 M:	Kristoffer Glembo <kristoffer@gaisler.com>
 L:	netdev@vger.kernel.org
@@ -4589,7 +4600,7 @@ F:	drivers/i2c/busses/i2c-ocores.c
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@secretlab.ca>
-L:	devicetree-discuss@lists.ozlabs.org
+L:	devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
 W:	http://fdt.secretlab.ca
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
@@ -5549,12 +5560,11 @@ S:	Supported
 F:	drivers/scsi/be2iscsi/
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-M:	Sathya Perla <sathyap@serverengines.com>
+M:	Sathya Perla <sathya.perla@emulex.com>
-M:	Subbu Seetharaman <subbus@serverengines.com>
+M:	Subbu Seetharaman <subbu.seetharaman@emulex.com>
-M:	Sarveshwar Bandi <sarveshwarb@serverengines.com>
+M:	Ajit Khaparde <ajit.khaparde@emulex.com>
-M:	Ajit Khaparde <ajitk@serverengines.com>
 L:	netdev@vger.kernel.org
-W:	http://www.serverengines.com
+W:	http://www.emulex.com
 S:	Supported
 F:	drivers/net/benet/
 
@@ -5614,18 +5624,20 @@ F:	include/linux/sfi*.h
 
 SIMTEC EB110ATX (Chalice CATS)
 P:	Ben Dooks
-M:	Vincent Sanders <support@simtec.co.uk>
+P:	Vincent Sanders <vince@simtec.co.uk>
+M:	Simtec Linux Team <linux@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
-M:	Vincent Sanders <support@simtec.co.uk>
+P:	Vincent Sanders <vince@simtec.co.uk>
+M:	Simtec Linux Team <linux@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
-F:	arch/arm/mach-s3c2410/
+F:	arch/arm/mach-s3c2410/mach-bast.c
-F:	drivers/*/*s3c2410*
+F:	arch/arm/mach-s3c2410/bast-ide.c
-F:	drivers/*/*/*s3c2410*
+F:	arch/arm/mach-s3c2410/bast-irq.c
 
 TI DAVINCI MACHINE SUPPORT
 M:	Kevin Hilman <khilman@deeprootsystems.com>
@@ -6783,12 +6795,12 @@ S:	Maintained
 F:	drivers/net/wireless/wl1251/*
 
 WL1271 WIRELESS DRIVER
-M:	Luciano Coelho <luciano.coelho@nokia.com>
+M:	Luciano Coelho <coelho@ti.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
 S:	Maintained
-F:	drivers/net/wireless/wl12xx/wl1271*
+F:	drivers/net/wireless/wl12xx/
 F:	include/linux/wl12xx.h
 
 WL3501 WIRELESS PCMCIA CARD DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/mach-ep93xx/core.c

@@ -838,7 +838,7 @@ EXPORT_SYMBOL(ep93xx_i2s_release);
 static struct resource ep93xx_ac97_resources[] = {
 	{
 		.start	= EP93XX_AAC_PHYS_BASE,
-		.end	= EP93XX_AAC_PHYS_BASE + 0xb0 - 1,
+		.end	= EP93XX_AAC_PHYS_BASE + 0xac - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = {
 	KEY(3, 3, KEY_POWER),
 };
 
-static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = {
+static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
 	.keymap		= mx25pdk_keymap,
 	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
 };

arch/arm/mach-ixp4xx/common.c

@@ -432,7 +432,7 @@ static struct clocksource clocksource_ixp4xx = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-unsigned long ixp4xx_timer_freq = FREQ;
+unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
 static void __init ixp4xx_clocksource_init(void)
 {
@@ -496,7 +496,7 @@ static struct clock_event_device clockevent_ixp4xx = {
 
 static void __init ixp4xx_clockevent_init(void)
 {
-	clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC,
+	clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC,
 					clockevent_ixp4xx.shift);
 	clockevent_ixp4xx.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);

arch/arm/mach-ixp4xx/include/mach/timex.h

@@ -10,6 +10,7 @@
  * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
  * timer register ignores the bottom 2 bits of the LATCH value.
  */
-#define FREQ 66666000
+#define IXP4XX_TIMER_FREQ 66666000
-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+#define CLOCK_TICK_RATE \
+	(((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
 

arch/arm/mach-ixp4xx/ixp4xx_qmgr.c

@@ -265,6 +265,11 @@ void qmgr_release_queue(unsigned int queue)
 	       qmgr_queue_descs[queue], queue);
 	qmgr_queue_descs[queue][0] = '\x0';
 #endif
+
+	while ((addr = qmgr_get_entry(queue)))
+		printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
+		       queue, addr);
+
 	__raw_writel(0, &qmgr_regs->sram[queue]);
 
 	used_sram_bitmap[0] &= ~mask[0];
@@ -275,10 +280,6 @@ void qmgr_release_queue(unsigned int queue)
 	spin_unlock_irq(&qmgr_lock);
 
 	module_put(THIS_MODULE);
-
-	while ((addr = qmgr_get_entry(queue)))
-		printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
-		       queue, addr);
 }
 
 static int qmgr_init(void)

arch/arm/mach-mxs/clock-mx23.c

@@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
 	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg | (1 << clk->enable_shift)) {				\
+	if (reg & (1 << clk->enable_shift)) {				\
 		pr_err("%s: clock is gated\n", __func__);		\
 		return -EINVAL;						\
 	}								\
@@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent)	\
 {									\
 	if (parent != clk->parent) {					\
 		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 HW_CLKCTRL_CLKSEQ_TOG);			\
+			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
 		clk->parent = parent;					\
 	}								\
 									\

arch/arm/mach-mxs/clock-mx28.c

@@ -355,12 +355,12 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	} else {							\
 		reg &= ~BM_CLKCTRL_##dr##_DIV;				\
 		reg |= div << BP_CLKCTRL_##dr##_DIV;			\
-		if (reg | (1 << clk->enable_shift)) {			\
+		if (reg & (1 << clk->enable_shift)) {			\
 			pr_err("%s: clock is gated\n", __func__);	\
 			return -EINVAL;					\
 		}							\
 	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);		\
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 									\
 	for (i = 10000; i; i--)						\
 		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
@@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent)	\
 {									\
 	if (parent != clk->parent) {					\
 		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 HW_CLKCTRL_CLKSEQ_TOG);			\
+			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
 		clk->parent = parent;					\
 	}								\
 									\
@@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("duart", NULL, uart_clk)
 	_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
-	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
 	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
 	_REGISTER_CLOCK(NULL, "hclk", hbus_clk)

arch/arm/mach-mxs/clock.c

@@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk)
 		if (clk->disable)
 			clk->disable(clk);
 		__clk_disable(clk->parent);
-		__clk_disable(clk->secondary);
 	}
 }
 
@@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk)
 
 	if (clk->usecount++ == 0) {
 		__clk_enable(clk->parent);
-		__clk_enable(clk->secondary);
 
 		if (clk->enable)
 			clk->enable(clk);

arch/arm/mach-mxs/gpio.c

@@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 	struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq);
 	u32 gpio_irq_no_base = port->virtual_irq_start;
 
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+
 	irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
 			__raw_readl(port->base + PINCTRL_IRQEN(port->id));
 

arch/arm/mach-mxs/include/mach/clock.h

@@ -29,8 +29,6 @@ struct clk {
 	int id;
 	/* Source clock this clk depends on */
 	struct clk *parent;
-	/* Secondary clock to enable/disable with this clock */
-	struct clk *secondary;
 	/* Reference count of clock enable/disable */
 	__s8 usecount;
 	/* Register bit position for clock's enable/disable control. */

arch/arm/mach-omap1/lcd_dma.c

@@ -37,7 +37,7 @@ int omap_lcd_dma_running(void)
 	 * On OMAP1510, internal LCD controller will start the transfer
 	 * when it gets enabled, so assume DMA running if LCD enabled.
 	 */
-	if (cpu_is_omap1510())
+	if (cpu_is_omap15xx())
 		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
 			return 1;
 
@@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
 
 void omap_set_lcd_dma_b1_rotation(int rotate)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
 		BUG();
 		return;
@@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
 
 void omap_set_lcd_dma_b1_mirror(int mirror)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
 		BUG();
 	}
@@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA virtual resulotion is not supported "
 				"in 1510 mode\n");
 		BUG();
@@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
 
 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
 		BUG();
 	}
@@ -177,7 +177,7 @@ static void set_b1_regs(void)
 			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 			/* 1510 DMA requires the bottom address to be 2 more
 			 * than the actual last memory access location. */
-			if (cpu_is_omap1510() &&
+			if (cpu_is_omap15xx() &&
 				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
 					bottom += 2;
 			ei = PIXSTEP(0, 0, 1, 0);
@@ -241,7 +241,7 @@ static void set_b1_regs(void)
 		return;	/* Suppress warning about uninitialized vars */
 	}
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
 		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
 		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
@@ -343,7 +343,7 @@ void omap_free_lcd_dma(void)
 		BUG();
 		return;
 	}
-	if (!cpu_is_omap1510())
+	if (!cpu_is_omap15xx())
 		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
 			    OMAP1610_DMA_LCD_CCR);
 	lcd_dma.reserved = 0;
@@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void)
 	 * connected. Otherwise the OMAP internal controller will
 	 * start the transfer when it gets enabled.
 	 */
-	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 		return;
 
 	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
@@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma);
 void omap_setup_lcd_dma(void)
 {
 	BUG_ON(lcd_dma.active);
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		/* Set some reasonable defaults */
 		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
 		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
 		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
 	}
 	set_b1_regs();
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		u16 w;
 
 		w = omap_readw(OMAP1610_DMA_LCD_CCR);
@@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void)
 	u16 w;
 
 	lcd_dma.active = 0;
-	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 		return;
 
 	w = omap_readw(OMAP1610_DMA_LCD_CCR);

arch/arm/mach-omap1/time.c

@@ -44,7 +44,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
-#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>

arch/arm/mach-omap2/board-devkit8000.c

@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
-	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
-	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
 	if (gpio_is_valid(dssdev->reset_gpio))
 		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
 	return 0;
@@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[];
 static int devkit8000_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int ret;
+
 	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-        /* gpio + 1 is "LCD_PWREN" (out, active high) */
+	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
-	devkit8000_lcd_device.reset_gpio = gpio + 1;
+	devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
-	gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
+	ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
-	/* Disable until needed */
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
-	gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+	if (ret < 0) {
+		devkit8000_lcd_device.reset_gpio = -EINVAL;
+		printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+	}
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
 	devkit8000_dvi_device.reset_gpio = gpio + 7;
-	gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
+	ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
-	/* Disable until needed */
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
-	gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+	if (ret < 0) {
+		devkit8000_dvi_device.reset_gpio = -EINVAL;
+		printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+	}
 
 	return 0;
 }

arch/arm/mach-omap2/board-omap4panda.c

@@ -409,8 +409,6 @@ static void __init omap4_panda_init(void)
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
 	omap_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
-	/* OMAP4 Panda uses internal transceiver so register nop transceiver */
-	usb_nop_xceiv_register();
 	omap4_ehci_init();
 	usb_musb_init(&musb_board_data);
 }

arch/arm/mach-omap2/board-rm680.c

@@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
 static struct regulator_init_data rm680_vemmc = {
 	.constraints =	{
 		.name			= "rm680_vemmc",
-		.min_uV			= 2900000,
-		.max_uV			= 2900000,
-		.apply_uV		= 1,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS

arch/arm/mach-omap2/mux.c

@@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags,
 	if (!partition->base) {
 		pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
 			__func__, partition->phys);
+		kfree(partition);
 		return -ENODEV;
 	}
 

arch/arm/mach-omap2/pm34xx.c

@@ -168,9 +168,10 @@ static void omap3_core_restore_context(void)
  * once during boot sequence, but this works as we are not using secure
  * services.
  */
-static void omap3_save_secure_ram_context(u32 target_mpu_state)
+static void omap3_save_secure_ram_context(void)
 {
 	u32 ret;
+	int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		/*
@@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state)
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 		ret = _omap_save_secure_sram((u32 *)
 				__pa(omap3_secure_ram_storage));
-		pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */
 		if (ret) {
 			printk(KERN_ERR "save_secure_sram() returns %08x\n",
@@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void)
 		local_fiq_disable();
 
 		omap_dma_global_context_save();
-		omap3_save_secure_ram_context(PWRDM_POWER_ON);
+		omap3_save_secure_ram_context();
 		omap_dma_global_context_restore();
 
 		local_irq_enable();

arch/arm/mach-omap2/smartreflex.c

@@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val)
 	struct omap_sr *sr_info = (struct omap_sr *) data;
 
 	if (!sr_info) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+		pr_warning("%s: omap_sr struct not found\n", __func__);
-			__func__, sr_info->voltdm->name);
 		return -EINVAL;
 	}
 
@@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
 	struct omap_sr *sr_info = (struct omap_sr *) data;
 
 	if (!sr_info) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+		pr_warning("%s: omap_sr struct not found\n", __func__);
-			__func__, sr_info->voltdm->name);
 		return -EINVAL;
 	}
 
@@ -834,7 +832,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 
 	if (!pdata) {
 		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_free_devinfo;
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -966,7 +965,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
 	}
 
 	sr_info = _sr_lookup(pdata->voltdm);
-	if (!sr_info) {
+	if (IS_ERR(sr_info)) {
 		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
 			__func__);
 		return -EINVAL;

arch/arm/mach-omap2/voltage.c

@@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
 	strcat(name, vdd->voltdm.name);
 
 	vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
+	kfree(name);
 	if (IS_ERR(vdd->debug_dir)) {
 		pr_warning("%s: Unable to create debugfs directory for"
 			" vdd_%s\n", __func__, vdd->voltdm.name);

arch/arm/mach-s5pv310/Kconfig

@@ -122,6 +122,7 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S5PV310_DEV_PD
+	select S5PV310_DEV_SYSMMU
 	select S5PV310_SETUP_I2C1
 	select S5PV310_SETUP_SDHCI
 	help

arch/arm/mach-s5pv310/include/mach/map.h

@@ -124,8 +124,6 @@
 #define S5PV310_PA_SYSMMU_TV		0x12E20000
 #define S5PV310_PA_SYSMMU_MFC_L		0x13620000
 #define S5PV310_PA_SYSMMU_MFC_R		0x13630000
-#define S5PV310_SYSMMU_TOTAL_IPNUM	16
-#define S5P_SYSMMU_TOTAL_IPNUM		S5PV310_SYSMMU_TOTAL_IPNUM
 
 /* compatibiltiy defines. */
 #define S3C_PA_UART			S5PV310_PA_UART

arch/arm/mach-s5pv310/include/mach/sysmmu.h

@@ -13,6 +13,9 @@
 #ifndef __ASM_ARM_ARCH_SYSMMU_H
 #define __ASM_ARM_ARCH_SYSMMU_H __FILE__
 
+#define S5PV310_SYSMMU_TOTAL_IPNUM	16
+#define S5P_SYSMMU_TOTAL_IPNUM		S5PV310_SYSMMU_TOTAL_IPNUM
+
 enum s5pv310_sysmmu_ips {
 	SYSMMU_MDMA,
 	SYSMMU_SSS,
@@ -32,7 +35,7 @@ enum s5pv310_sysmmu_ips {
 	SYSMMU_MFC_R,
 };
 
-static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = {
+static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = {
 	"SYSMMU_MDMA"	,
 	"SYSMMU_SSS"	,
 	"SYSMMU_FIMC0"	,

arch/arm/plat-mxc/include/mach/uncompress.h

@@ -95,6 +95,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_MX35_3DS:
 	case MACH_TYPE_PCM043:
 	case MACH_TYPE_LILLY1131:
+	case MACH_TYPE_VPR200:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MAGX_ZN5:
@@ -102,6 +103,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 		break;
 	case MACH_TYPE_MX51_BABBAGE:
 	case MACH_TYPE_EUKREA_CPUIMX51SD:
+	case MACH_TYPE_MX51_3DS:
 		uart_base = MX51_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX50_RDP:

arch/arm/plat-s5p/Kconfig

@@ -37,6 +37,14 @@ config S5P_GPIO_INT
 	help
 	  Common code for the GPIO interrupts (other than external interrupts.)
 
+comment "System MMU"
+
+config S5P_SYSTEM_MMU
+	bool "S5P SYSTEM MMU"
+	depends on ARCH_S5PV310
+	help
+	  Say Y here if you want to enable System MMU
+
 config S5P_DEV_FIMC0
 	bool
 	help
@@ -66,19 +74,3 @@ config S5P_DEV_CSIS1
 	bool
 	help
 	  Compile in platform device definitions for MIPI-CSIS channel 1
-
-menuconfig S5P_SYSMMU
-	bool "SYSMMU support"
-	depends on ARCH_S5PV310
-	help
-	  This is a System MMU driver for Samsung ARM based Soc.
-
-if S5P_SYSMMU
-
-config S5P_SYSMMU_DEBUG
-	bool "Enables debug messages"
-	depends on S5P_SYSMMU
-	help
-	  This enables SYSMMU driver debug massages.
-
-endif

arch/arm/plat-s5p/Makefile

@@ -19,6 +19,7 @@ obj-y				+= clock.o
 obj-y				+= irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 obj-$(CONFIG_S5P_GPIO_INT)	+= irq-gpioint.o
+obj-$(CONFIG_S5P_SYSTEM_MMU)	+= sysmmu.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 
@@ -30,4 +31,3 @@ obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
 obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
 obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o
-obj-$(CONFIG_S5P_SYSMMU)	+= sysmmu.o

arch/arm/plat-s5p/include/plat/sysmmu.h

@@ -1,23 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Samsung sysmmu driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_SYSMMU_H
-#define __ASM_PLAT_S5P_SYSMMU_H __FILE__
-
-/* debug macro */
-#ifdef CONFIG_S5P_SYSMMU_DEBUG
-#define sysmmu_debug(fmt, arg...)	printk(KERN_INFO "[%s] " fmt, __func__, ## arg)
-#else
-#define sysmmu_debug(fmt, arg...)	do { } while (0)
-#endif
-
-#endif /* __ASM_PLAT_S5P_SYSMMU_H */

arch/arm/plat-s5p/sysmmu.c

@@ -16,8 +16,6 @@
 #include <mach/regs-sysmmu.h>
 #include <mach/sysmmu.h>
 
-#include <plat/sysmmu.h>
-
 struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM];
 
 void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp)
@@ -123,7 +121,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips)
 		: "=r" (pg) : : "cc");		\
 		pg &= ~0x3fff;
 
-	sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg);
+	printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg);
 
 	/* Set sysmmu page table base address */
 	__raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR);

arch/arm/plat-samsung/include/plat/pm.h

@@ -17,6 +17,8 @@
 
 #include <linux/irq.h>
 
+struct sys_device;
+
 #ifdef CONFIG_PM
 
 extern __init int s3c_pm_init(void);

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sun Dec 12 23:24:27 2010
+# Last update: Mon Feb 7 08:59:27 2011
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2240,7 +2240,7 @@ arm_ultimator2		MACH_ARM_ULTIMATOR2	ARM_ULTIMATOR2		2250
 vs_v210			MACH_VS_V210		VS_V210			2252
 vs_v212			MACH_VS_V212		VS_V212			2253
 hmt			MACH_HMT		HMT			2254
-suen3			MACH_SUEN3		SUEN3			2255
+km_kirkwood		MACH_KM_KIRKWOOD	KM_KIRKWOOD		2255
 vesper			MACH_VESPER		VESPER			2256
 str9			MACH_STR9		STR9			2257
 omap3_wl_ff		MACH_OMAP3_WL_FF	OMAP3_WL_FF		2258
@@ -2987,7 +2987,7 @@ pxwnas_500_1000		MACH_PXWNAS_500_1000	PXWNAS_500_1000		3001
 ea20			MACH_EA20		EA20			3002
 awm2			MACH_AWM2		AWM2			3003
 ti8148evm		MACH_TI8148EVM		TI8148EVM		3004
-tegra_seaboard		MACH_TEGRA_SEABOARD	TEGRA_SEABOARD		3005
+seaboard		MACH_SEABOARD		SEABOARD		3005
 linkstation_chlv2	MACH_LINKSTATION_CHLV2	LINKSTATION_CHLV2	3006
 tera_pro2_rack		MACH_TERA_PRO2_RACK	TERA_PRO2_RACK		3007
 rubys			MACH_RUBYS		RUBYS			3008
@@ -3190,7 +3190,7 @@ synergy			MACH_SYNERGY		SYNERGY			3205
 ics_if_voip		MACH_ICS_IF_VOIP	ICS_IF_VOIP		3206
 wlf_cragg_6410		MACH_WLF_CRAGG_6410	WLF_CRAGG_6410		3207
 punica			MACH_PUNICA		PUNICA			3208
-sbc_nt250		MACH_SBC_NT250		SBC_NT250		3209
+trimslice		MACH_TRIMSLICE		TRIMSLICE		3209
 mx27_wmultra		MACH_MX27_WMULTRA	MX27_WMULTRA		3210
 mackerel		MACH_MACKEREL		MACKEREL		3211
 fa9x27			MACH_FA9X27		FA9X27			3213
@@ -3219,3 +3219,100 @@ pivicc			MACH_PIVICC		PIVICC			3235
 pcm048			MACH_PCM048		PCM048			3236
 dds			MACH_DDS		DDS			3237
 chalten_xa1		MACH_CHALTEN_XA1	CHALTEN_XA1		3238
+ts48xx			MACH_TS48XX		TS48XX			3239
+tonga2_tfttimer		MACH_TONGA2_TFTTIMER	TONGA2_TFTTIMER		3240
+whistler		MACH_WHISTLER		WHISTLER		3241
+asl_phoenix		MACH_ASL_PHOENIX	ASL_PHOENIX		3242
+at91sam9263otlite	MACH_AT91SAM9263OTLITE	AT91SAM9263OTLITE	3243
+ddplug			MACH_DDPLUG		DDPLUG			3244
+d2plug			MACH_D2PLUG		D2PLUG			3245
+kzm9d			MACH_KZM9D		KZM9D			3246
+verdi_lte		MACH_VERDI_LTE		VERDI_LTE		3247
+nanozoom		MACH_NANOZOOM		NANOZOOM		3248
+dm3730_som_lv		MACH_DM3730_SOM_LV	DM3730_SOM_LV		3249
+dm3730_torpedo		MACH_DM3730_TORPEDO	DM3730_TORPEDO		3250
+anchovy			MACH_ANCHOVY		ANCHOVY			3251
+re2rev20		MACH_RE2REV20		RE2REV20		3253
+re2rev21		MACH_RE2REV21		RE2REV21		3254
+cns21xx			MACH_CNS21XX		CNS21XX			3255
+rider			MACH_RIDER		RIDER			3257
+nsk330			MACH_NSK330		NSK330			3258
+cns2133evb		MACH_CNS2133EVB		CNS2133EVB		3259
+z3_816x_mod		MACH_Z3_816X_MOD	Z3_816X_MOD		3260
+z3_814x_mod		MACH_Z3_814X_MOD	Z3_814X_MOD		3261
+beect			MACH_BEECT		BEECT			3262
+dma_thunderbug		MACH_DMA_THUNDERBUG	DMA_THUNDERBUG		3263
+omn_at91sam9g20		MACH_OMN_AT91SAM9G20	OMN_AT91SAM9G20		3264
+mx25_e2s_uc		MACH_MX25_E2S_UC	MX25_E2S_UC		3265
+mione			MACH_MIONE		MIONE			3266
+top9000_tcu		MACH_TOP9000_TCU	TOP9000_TCU		3267
+top9000_bsl		MACH_TOP9000_BSL	TOP9000_BSL		3268
+kingdom			MACH_KINGDOM		KINGDOM			3269
+armadillo460		MACH_ARMADILLO460	ARMADILLO460		3270
+lq2			MACH_LQ2		LQ2			3271
+sweda_tms2		MACH_SWEDA_TMS2		SWEDA_TMS2		3272
+mx53_loco		MACH_MX53_LOCO		MX53_LOCO		3273
+acer_a8			MACH_ACER_A8		ACER_A8			3275
+acer_gauguin		MACH_ACER_GAUGUIN	ACER_GAUGUIN		3276
+guppy			MACH_GUPPY		GUPPY			3277
+mx61_ard		MACH_MX61_ARD		MX61_ARD		3278
+tx53			MACH_TX53		TX53			3279
+omapl138_case_a3	MACH_OMAPL138_CASE_A3	OMAPL138_CASE_A3	3280
+uemd			MACH_UEMD		UEMD			3281
+ccwmx51mut		MACH_CCWMX51MUT		CCWMX51MUT		3282
+rockhopper		MACH_ROCKHOPPER		ROCKHOPPER		3283
+nookcolor		MACH_NOOKCOLOR		NOOKCOLOR		3284
+hkdkc100		MACH_HKDKC100		HKDKC100		3285
+ts42xx			MACH_TS42XX		TS42XX			3286
+aebl			MACH_AEBL		AEBL			3287
+wario			MACH_WARIO		WARIO			3288
+gfs_spm			MACH_GFS_SPM		GFS_SPM			3289
+cm_t3730		MACH_CM_T3730		CM_T3730		3290
+isc3			MACH_ISC3		ISC3			3291
+rascal			MACH_RASCAL		RASCAL			3292
+hrefv60			MACH_HREFV60		HREFV60			3293
+tpt_2_0			MACH_TPT_2_0		TPT_2_0			3294
+pyramid_td		MACH_PYRAMID_TD		PYRAMID_TD		3295
+splendor		MACH_SPLENDOR		SPLENDOR		3296
+guf_planet		MACH_GUF_PLANET		GUF_PLANET		3297
+msm8x60_qt		MACH_MSM8X60_QT		MSM8X60_QT		3298
+htc_hd_mini		MACH_HTC_HD_MINI	HTC_HD_MINI		3299
+athene			MACH_ATHENE		ATHENE			3300
+deep_r_ek_1		MACH_DEEP_R_EK_1	DEEP_R_EK_1		3301
+vivow_ct		MACH_VIVOW_CT		VIVOW_CT		3302
+nery_1000		MACH_NERY_1000		NERY_1000		3303
+rfl109145_ssrv		MACH_RFL109145_SSRV	RFL109145_SSRV		3304
+nmh			MACH_NMH		NMH			3305
+wn802t			MACH_WN802T		WN802T			3306
+dragonet		MACH_DRAGONET		DRAGONET		3307
+geneva_b		MACH_GENEVA_B		GENEVA_B		3308
+at91sam9263desk16l	MACH_AT91SAM9263DESK16L	AT91SAM9263DESK16L	3309
+bcmhana_sv		MACH_BCMHANA_SV		BCMHANA_SV		3310
+bcmhana_tablet		MACH_BCMHANA_TABLET	BCMHANA_TABLET		3311
+koi			MACH_KOI		KOI			3312
+ts4800			MACH_TS4800		TS4800			3313
+tqma9263		MACH_TQMA9263		TQMA9263		3314
+holiday			MACH_HOLIDAY		HOLIDAY			3315
+dma_6410		MACH_DMA6410		DMA6410			3316
+pcats_overlay		MACH_PCATS_OVERLAY	PCATS_OVERLAY		3317
+hwgw6410		MACH_HWGW6410		HWGW6410		3318
+shenzhou		MACH_SHENZHOU		SHENZHOU		3319
+cwme9210		MACH_CWME9210		CWME9210		3320
+cwme9210js		MACH_CWME9210JS		CWME9210JS		3321
+pgs_v1			MACH_PGS_SITARA		PGS_SITARA		3322
+colibri_tegra2		MACH_COLIBRI_TEGRA2	COLIBRI_TEGRA2		3323
+w21			MACH_W21		W21			3324
+polysat1		MACH_POLYSAT1		POLYSAT1		3325
+dataway			MACH_DATAWAY		DATAWAY			3326
+cobral138		MACH_COBRAL138		COBRAL138		3327
+roverpcs8		MACH_ROVERPCS8		ROVERPCS8		3328
+marvelc			MACH_MARVELC		MARVELC			3329
+navefihid		MACH_NAVEFIHID		NAVEFIHID		3330
+dm365_cv100		MACH_DM365_CV100	DM365_CV100		3331
+able			MACH_ABLE		ABLE			3332
+legacy			MACH_LEGACY		LEGACY			3333
+icong			MACH_ICONG		ICONG			3334
+rover_g8		MACH_ROVER_G8		ROVER_G8		3335
+t5388p			MACH_T5388P		T5388P			3336
+dingo			MACH_DINGO		DINGO			3337
+goflexhome		MACH_GOFLEXHOME		GOFLEXHOME		3338

arch/blackfin/include/asm/bfin_serial.h

@@ -10,6 +10,7 @@
 #define __BFIN_ASM_SERIAL_H__
 
 #include <linux/serial_core.h>
+#include <linux/spinlock.h>
 #include <mach/anomaly.h>
 #include <mach/bfin_serial.h>
 
@@ -41,6 +42,7 @@ struct bfin_serial_port {
 	struct circ_buf rx_dma_buf;
 	struct timer_list rx_dma_timer;
 	int rx_dma_nrows;
+	spinlock_t rx_lock;
 	unsigned int tx_dma_channel;
 	unsigned int rx_dma_channel;
 	struct work_struct tx_dma_workqueue;

arch/m32r/kernel/irq.c

@@ -80,7 +80,7 @@ asmlinkage unsigned int do_IRQ(int irq, struct pt_regs *regs)
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 	/* FIXME M32R */
 #endif
-	__do_IRQ(irq);
+	generic_handle_irq(irq);
 	irq_exit();
 	set_irq_regs(old_regs);
 

arch/microblaze/include/asm/irqflags.h

@@ -12,7 +12,7 @@
 #include <linux/types.h>
 #include <asm/registers.h>
 
-#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 
 static inline unsigned long arch_local_irq_save(void)
 {

arch/microblaze/include/asm/pgtable.h

@@ -411,21 +411,20 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 static inline unsigned long pte_update(pte_t *p, unsigned long clr,
 				unsigned long set)
 {
-	unsigned long old, tmp, msr;
+	unsigned long flags, old, tmp;
 
-	__asm__ __volatile__("\
+	raw_local_irq_save(flags);
-	msrclr	%2, 0x2\n\
+
-	nop\n\
+	__asm__ __volatile__(	"lw	%0, %2, r0	\n"
-	lw	%0, %4, r0\n\
+				"andn	%1, %0, %3	\n"
-	andn	%1, %0, %5\n\
+				"or	%1, %1, %4	\n"
-	or	%1, %1, %6\n\
+				"sw	%1, %2, r0	\n"
-	sw	%1, %4, r0\n\
+			: "=&r" (old), "=&r" (tmp)
-	mts     rmsr, %2\n\
+			: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set)
-	nop"
-	: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
-	: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p)
 			: "cc");
 
+	raw_local_irq_restore(flags);
+
 	return old;
 }