spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup

Current code does not use ctldata at all, so remove spi_set_ctldata call.

spi_setup() will set spi->bits_per_word = 8 if it was not set, so remove
!spi->max_speed_hz checking.

The spi core allows absent of spi->max_speed_hz setting, if it was not set
spi_setup() assigns spi->master->max_speed_hz to it.

spi core allows spi->max_speed_hz > spi->master->max_speed_hz, in this case
spi core will limit the transfer speed to ensure xfer->speed_hz won't
greater than spi->master->max_speed_hz so remove checking if
spi->max_speed_hz is higher than spi->master->max_speed_hz.

As a result, both pic32_sqi_setup() and pic32_sqi_cleanup() can be removed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Axel Lin 2016-04-24 14:59:20 +08:00 committed by Mark Brown
parent 989ffc7bd6
commit 191ec11348
1 changed files with 0 additions and 41 deletions

View File

@ -460,45 +460,6 @@ static int pic32_sqi_unprepare_hardware(struct spi_master *master)
return 0;
}
/* This may be called twice for each spi dev */
static int pic32_sqi_setup(struct spi_device *spi)
{
struct pic32_sqi *sqi;
if (spi_get_ctldata(spi)) {
dev_err(&spi->dev, "is already associated\n");
return -EBUSY;
}
/* check word size */
if (!spi->bits_per_word) {
dev_err(&spi->dev, "No bits_per_word defined\n");
return -EINVAL;
}
/* check maximum SPI clk rate */
if (!spi->max_speed_hz) {
dev_err(&spi->dev, "No max speed HZ parameter\n");
return -EINVAL;
}
if (spi->master->max_speed_hz < spi->max_speed_hz) {
dev_err(&spi->dev, "max speed %u HZ is too high\n",
spi->max_speed_hz);
return -EINVAL;
}
sqi = spi_master_get_devdata(spi->master);
spi_set_ctldata(spi, (void *)sqi);
return 0;
}
static void pic32_sqi_cleanup(struct spi_device *spi)
{
spi_set_ctldata(spi, (void *)NULL);
}
static int ring_desc_ring_alloc(struct pic32_sqi *sqi)
{
struct ring_desc *rdesc;
@ -700,8 +661,6 @@ static int pic32_sqi_probe(struct platform_device *pdev)
master->mode_bits = SPI_MODE_3 | SPI_MODE_0 | SPI_TX_DUAL |
SPI_RX_DUAL | SPI_TX_QUAD | SPI_RX_QUAD;
master->flags = SPI_MASTER_HALF_DUPLEX;
master->setup = pic32_sqi_setup;
master->cleanup = pic32_sqi_cleanup;
master->can_dma = pic32_sqi_can_dma;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32);
master->transfer_one_message = pic32_sqi_one_message;