mfd: Initial support for twl5031

TWL5031 introduces two new interrupts in PIH. Moreover, BCI
has changed remarkably and, thus, it's disabled when TWL5031
is in use.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Ilkka Koskinen 2009-11-10 17:26:15 +02:00 committed by Samuel Ortiz
parent 6a6127462e
commit 1920a61e20
3 changed files with 180 additions and 11 deletions

View File

@ -158,6 +158,10 @@
#define TWL4030_BASEADD_PWMB 0x00F1
#define TWL4030_BASEADD_KEYPAD 0x00D2
#define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */
#define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different than TWL4030's
one */
/* subchip/slave 3 - POWER ID */
#define TWL4030_BASEADD_BACKUP 0x0014
#define TWL4030_BASEADD_INT 0x002E
@ -189,6 +193,7 @@
/* chip-specific feature flags, for i2c_device_id.driver_data */
#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */
#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */
#define TWL5031 BIT(2) /* twl5031 has different registers */
/*----------------------------------------------------------------------*/
@ -241,6 +246,8 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
{ 2, TWL4030_BASEADD_PWM1 },
{ 2, TWL4030_BASEADD_PWMA },
{ 2, TWL4030_BASEADD_PWMB },
{ 2, TWL5031_BASEADD_ACCESSORY },
{ 2, TWL5031_BASEADD_INTERRUPTS },
{ 3, TWL4030_BASEADD_BACKUP },
{ 3, TWL4030_BASEADD_INT },
@ -488,7 +495,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
{
struct device *child;
if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
if (twl_has_bci() && pdata->bci &&
!(features & (TPS_SUBSET | TWL5031))) {
child = add_child(3, "twl4030_bci",
pdata->bci, sizeof(*pdata->bci),
false,
@ -760,6 +768,7 @@ static void clocks_init(struct device *dev,
int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
int twl_exit_irq(void);
int twl_init_chip_irq(const char *chip);
static int twl4030_remove(struct i2c_client *client)
{
@ -835,6 +844,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (client->irq
&& pdata->irq_base
&& pdata->irq_end > pdata->irq_base) {
twl_init_chip_irq(id->name);
status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
if (status < 0)
goto fail;
@ -850,6 +860,7 @@ fail:
static const struct i2c_device_id twl4030_ids[] = {
{ "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */
{ "twl5030", 0 }, /* T2 updated */
{ "twl5031", TWL5031 }, /* TWL5030 updated */
{ "tps65950", 0 }, /* catalog version of twl5030 */
{ "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
{ "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */

View File

@ -74,6 +74,8 @@ struct sih {
u8 edr_offset;
u8 bytes_edr; /* bytelen of EDR */
u8 irq_lines; /* number of supported irq lines */
/* SIR ignored -- set interrupt, for testing only */
struct irq_data {
u8 isr_offset;
@ -82,6 +84,9 @@ struct sih {
/* + 2 bytes padding */
};
static const struct sih *sih_modules;
static int nr_sih_modules;
#define SIH_INITIALIZER(modname, nbits) \
.module = TWL4030_MODULE_ ## modname, \
.control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
@ -89,6 +94,7 @@ struct sih {
.bytes_ixr = DIV_ROUND_UP(nbits, 8), \
.edr_offset = TWL4030_ ## modname ## _EDR, \
.bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \
.irq_lines = 2, \
.mask = { { \
.isr_offset = TWL4030_ ## modname ## _ISR1, \
.imr_offset = TWL4030_ ## modname ## _IMR1, \
@ -107,7 +113,8 @@ struct sih {
/* Order in this table matches order in PIH_ISR. That is,
* BIT(n) in PIH_ISR is sih_modules[n].
*/
static const struct sih sih_modules[6] = {
/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
static const struct sih sih_modules_twl4030[6] = {
[0] = {
.name = "gpio",
.module = TWL4030_MODULE_GPIO,
@ -118,6 +125,7 @@ static const struct sih sih_modules[6] = {
/* Note: *all* of these IRQs default to no-trigger */
.edr_offset = REG_GPIO_EDR1,
.bytes_edr = 5,
.irq_lines = 2,
.mask = { {
.isr_offset = REG_GPIO_ISR1A,
.imr_offset = REG_GPIO_IMR1A,
@ -140,6 +148,7 @@ static const struct sih sih_modules[6] = {
.edr_offset = TWL4030_INTERRUPTS_BCIEDR1,
/* Note: most of these IRQs default to no-trigger */
.bytes_edr = 3,
.irq_lines = 2,
.mask = { {
.isr_offset = TWL4030_INTERRUPTS_BCIISR1A,
.imr_offset = TWL4030_INTERRUPTS_BCIIMR1A,
@ -164,6 +173,99 @@ static const struct sih sih_modules[6] = {
/* there are no SIH modules #6 or #7 ... */
};
static const struct sih sih_modules_twl5031[8] = {
[0] = {
.name = "gpio",
.module = TWL4030_MODULE_GPIO,
.control_offset = REG_GPIO_SIH_CTRL,
.set_cor = true,
.bits = TWL4030_GPIO_MAX,
.bytes_ixr = 3,
/* Note: *all* of these IRQs default to no-trigger */
.edr_offset = REG_GPIO_EDR1,
.bytes_edr = 5,
.irq_lines = 2,
.mask = { {
.isr_offset = REG_GPIO_ISR1A,
.imr_offset = REG_GPIO_IMR1A,
}, {
.isr_offset = REG_GPIO_ISR1B,
.imr_offset = REG_GPIO_IMR1B,
}, },
},
[1] = {
.name = "keypad",
.set_cor = true,
SIH_INITIALIZER(KEYPAD_KEYP, 4)
},
[2] = {
.name = "bci",
.module = TWL5031_MODULE_INTERRUPTS,
.control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
.bits = 7,
.bytes_ixr = 1,
.edr_offset = TWL5031_INTERRUPTS_BCIEDR1,
/* Note: most of these IRQs default to no-trigger */
.bytes_edr = 2,
.irq_lines = 2,
.mask = { {
.isr_offset = TWL5031_INTERRUPTS_BCIISR1,
.imr_offset = TWL5031_INTERRUPTS_BCIIMR1,
}, {
.isr_offset = TWL5031_INTERRUPTS_BCIISR2,
.imr_offset = TWL5031_INTERRUPTS_BCIIMR2,
}, },
},
[3] = {
.name = "madc",
SIH_INITIALIZER(MADC, 4)
},
[4] = {
/* USB doesn't use the same SIH organization */
.name = "usb",
},
[5] = {
.name = "power",
.set_cor = true,
SIH_INITIALIZER(INT_PWR, 8)
},
[6] = {
/*
* ACI doesn't use the same SIH organization.
* For example, it supports only one interrupt line
*/
.name = "aci",
.module = TWL5031_MODULE_ACCESSORY,
.bits = 9,
.bytes_ixr = 2,
.irq_lines = 1,
.mask = { {
.isr_offset = TWL5031_ACIIDR_LSB,
.imr_offset = TWL5031_ACIIMR_LSB,
}, },
},
[7] = {
/* Accessory */
.name = "acc",
.module = TWL5031_MODULE_ACCESSORY,
.control_offset = TWL5031_ACCSIHCTRL,
.bits = 2,
.bytes_ixr = 1,
.edr_offset = TWL5031_ACCEDR1,
/* Note: most of these IRQs default to no-trigger */
.bytes_edr = 1,
.irq_lines = 2,
.mask = { {
.isr_offset = TWL5031_ACCISR1,
.imr_offset = TWL5031_ACCIMR1,
}, {
.isr_offset = TWL5031_ACCISR2,
.imr_offset = TWL5031_ACCIMR2,
}, },
},
};
#undef TWL4030_MODULE_KEYPAD_KEYP
#undef TWL4030_MODULE_INT_PWR
#undef TWL4030_INT_PWR_EDR
@ -284,12 +386,16 @@ static int twl4030_init_sih_modules(unsigned line)
/* disable all interrupts on our line */
memset(buf, 0xff, sizeof buf);
sih = sih_modules;
for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
for (i = 0; i < nr_sih_modules; i++, sih++) {
/* skip USB -- it's funky */
if (!sih->bytes_ixr)
continue;
/* Not all the SIH modules support multiple interrupt lines */
if (sih->irq_lines <= line)
continue;
status = twl4030_i2c_write(sih->module, buf,
sih->mask[line].imr_offset, sih->bytes_ixr);
if (status < 0)
@ -314,7 +420,7 @@ static int twl4030_init_sih_modules(unsigned line)
}
sih = sih_modules;
for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
for (i = 0; i < nr_sih_modules; i++, sih++) {
u8 rxbuf[4];
int j;
@ -322,6 +428,10 @@ static int twl4030_init_sih_modules(unsigned line)
if (!sih->bytes_ixr)
continue;
/* Not all the SIH modules support multiple interrupt lines */
if (sih->irq_lines <= line)
continue;
/* Clear pending interrupt status. Either the read was
* enough, or we need to write those bits. Repeat, in
* case an IRQ is pending (PENDDIS=0) ... that's not
@ -611,7 +721,7 @@ int twl4030_sih_setup(int module)
/* only support modules with standard clear-on-read for now */
for (sih_mod = 0, sih = sih_modules;
sih_mod < ARRAY_SIZE(sih_modules);
sih_mod < nr_sih_modules;
sih_mod++, sih++) {
if (sih->module == module && sih->set_cor) {
if (!WARN((irq_base + sih->bits) > NR_IRQS,
@ -756,3 +866,16 @@ int twl_exit_irq(void)
}
return 0;
}
int twl_init_chip_irq(const char *chip)
{
if (!strcmp(chip, "twl5031")) {
sih_modules = sih_modules_twl5031;
nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
} else {
sih_modules = sih_modules_twl4030;
nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
}
return 0;
}

View File

@ -61,13 +61,16 @@
#define TWL4030_MODULE_PWMA 0x0E
#define TWL4030_MODULE_PWMB 0x0F
#define TWL5031_MODULE_ACCESSORY 0x10
#define TWL5031_MODULE_INTERRUPTS 0x11
/* Slave 3 (i2c address 0x4b) */
#define TWL4030_MODULE_BACKUP 0x10
#define TWL4030_MODULE_INT 0x11
#define TWL4030_MODULE_PM_MASTER 0x12
#define TWL4030_MODULE_PM_RECEIVER 0x13
#define TWL4030_MODULE_RTC 0x14
#define TWL4030_MODULE_SECURED_REG 0x15
#define TWL4030_MODULE_BACKUP 0x12
#define TWL4030_MODULE_INT 0x13
#define TWL4030_MODULE_PM_MASTER 0x14
#define TWL4030_MODULE_PM_RECEIVER 0x15
#define TWL4030_MODULE_RTC 0x16
#define TWL4030_MODULE_SECURED_REG 0x17
/*
* Read and write single 8-bit registers
@ -221,6 +224,38 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
/*----------------------------------------------------------------------*/
/*
* Accessory Interrupts
*/
#define TWL5031_ACIIMR_LSB 0x05
#define TWL5031_ACIIMR_MSB 0x06
#define TWL5031_ACIIDR_LSB 0x07
#define TWL5031_ACIIDR_MSB 0x08
#define TWL5031_ACCISR1 0x0F
#define TWL5031_ACCIMR1 0x10
#define TWL5031_ACCISR2 0x11
#define TWL5031_ACCIMR2 0x12
#define TWL5031_ACCSIR 0x13
#define TWL5031_ACCEDR1 0x14
#define TWL5031_ACCSIHCTRL 0x15
/*----------------------------------------------------------------------*/
/*
* Battery Charger Controller
*/
#define TWL5031_INTERRUPTS_BCIISR1 0x0
#define TWL5031_INTERRUPTS_BCIIMR1 0x1
#define TWL5031_INTERRUPTS_BCIISR2 0x2
#define TWL5031_INTERRUPTS_BCIIMR2 0x3
#define TWL5031_INTERRUPTS_BCISIR 0x4
#define TWL5031_INTERRUPTS_BCIEDR1 0x5
#define TWL5031_INTERRUPTS_BCIEDR2 0x6
#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7
/*----------------------------------------------------------------------*/
/* Power bus message definitions */
/* The TWL4030/5030 splits its power-management resources (the various