ALSA: wss-lib: move AD1845 frequency setting into wss-lib

This is required to allow the sscape driver
to autodetect installed codec.

Also, do not create a timer if detected codec
has no hardware timer (e.g. AD1848).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Rene Herman
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Krzysztof Helt 2009-01-09 23:10:52 +01:00 committed by Takashi Iwai
parent c59765042f
commit 199f797873
2 changed files with 48 additions and 105 deletions

View File

@ -129,9 +129,6 @@ enum GA_REG {
#define DMA_8BIT 0x80
#define AD1845_FREQ_SEL_MSB 0x16
#define AD1845_FREQ_SEL_LSB 0x17
enum card_type {
SSCAPE,
SSCAPE_PNP,
@ -954,82 +951,6 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned l
}
/*
* Override for the CS4231 playback format function.
* The AD1845 has much simpler format and rate selection.
*/
static void ad1845_playback_format(struct snd_wss *chip,
struct snd_pcm_hw_params *params,
unsigned char format)
{
unsigned long flags;
unsigned rate = params_rate(params);
/*
* The AD1845 can't handle sample frequencies
* outside of 4 kHZ to 50 kHZ
*/
if (rate > 50000)
rate = 50000;
else if (rate < 4000)
rate = 4000;
spin_lock_irqsave(&chip->reg_lock, flags);
/*
* Program the AD1845 correctly for the playback stream.
* Note that we do NOT need to toggle the MCE bit because
* the PLAYBACK_ENABLE bit of the Interface Configuration
* register is set.
*
* NOTE: We seem to need to write to the MSB before the LSB
* to get the correct sample frequency.
*/
snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0));
snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8));
snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate);
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
/*
* Override for the CS4231 capture format function.
* The AD1845 has much simpler format and rate selection.
*/
static void ad1845_capture_format(struct snd_wss *chip,
struct snd_pcm_hw_params *params,
unsigned char format)
{
unsigned long flags;
unsigned rate = params_rate(params);
/*
* The AD1845 can't handle sample frequencies
* outside of 4 kHZ to 50 kHZ
*/
if (rate > 50000)
rate = 50000;
else if (rate < 4000)
rate = 4000;
spin_lock_irqsave(&chip->reg_lock, flags);
/*
* Program the AD1845 correctly for the playback stream.
* Note that we do NOT need to toggle the MCE bit because
* the CAPTURE_ENABLE bit of the Interface Configuration
* register is set.
*
* NOTE: We seem to need to write to the MSB before the LSB
* to get the correct sample frequency.
*/
snd_wss_out(chip, CS4231_REC_FORMAT, (format & 0xf0));
snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8));
snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate);
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
/*
* Create an AD1845 PCM subdevice on the SoundScape. The AD1845
* is very much like a CS4231, with a few extra bits. We will
@ -1055,11 +976,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
unsigned long flags;
struct snd_pcm *pcm;
#define AD1845_FREQ_SEL_ENABLE 0x08
#define AD1845_PWR_DOWN_CTRL 0x1b
#define AD1845_CRYS_CLOCK_SEL 0x1d
/*
* It turns out that the PLAYBACK_ENABLE bit is set
* by the lowlevel driver ...
@ -1074,7 +990,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
*/
if (sscape->type != SSCAPE_VIVO) {
int val;
/*
* The input clock frequency on the SoundScape must
* be 14.31818 MHz, because we must set this register
@ -1082,22 +997,10 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
*/
snd_wss_mce_up(chip);
spin_lock_irqsave(&chip->reg_lock, flags);
snd_wss_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20);
snd_wss_out(chip, AD1845_CLOCK, 0x20);
spin_unlock_irqrestore(&chip->reg_lock, flags);
snd_wss_mce_down(chip);
/*
* More custom configuration:
* a) select "mode 2" and provide a current drive of 8mA
* b) enable frequency selection (for capture/playback)
*/
spin_lock_irqsave(&chip->reg_lock, flags);
snd_wss_out(chip, CS4231_MISC_INFO,
CS4231_MODE2 | 0x10);
val = snd_wss_in(chip, AD1845_PWR_DOWN_CTRL);
snd_wss_out(chip, AD1845_PWR_DOWN_CTRL,
val | AD1845_FREQ_SEL_ENABLE);
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
err = snd_wss_pcm(chip, 0, &pcm);
@ -1113,11 +1016,13 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
"for AD1845 chip\n");
goto _error;
}
err = snd_wss_timer(chip, 0, NULL);
if (err < 0) {
snd_printk(KERN_ERR "sscape: No timer device "
"for AD1845 chip\n");
goto _error;
if (chip->hardware != WSS_HW_AD1848) {
err = snd_wss_timer(chip, 0, NULL);
if (err < 0) {
snd_printk(KERN_ERR "sscape: No timer device "
"for AD1845 chip\n");
goto _error;
}
}
if (sscape->type != SSCAPE_VIVO) {
@ -1128,8 +1033,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port,
"MIDI mixer control\n");
goto _error;
}
chip->set_playback_format = ad1845_playback_format;
chip->set_capture_format = ad1845_capture_format;
}
strcpy(card->driver, "SoundScape");

View File

@ -646,6 +646,24 @@ static void snd_wss_playback_format(struct snd_wss *chip,
full_calib = 0;
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
} else if (chip->hardware == WSS_HW_AD1845) {
unsigned rate = params_rate(params);
/*
* Program the AD1845 correctly for the playback stream.
* Note that we do NOT need to toggle the MCE bit because
* the PLAYBACK_ENABLE bit of the Interface Configuration
* register is set.
*
* NOTE: We seem to need to write to the MSB before the LSB
* to get the correct sample frequency.
*/
spin_lock_irqsave(&chip->reg_lock, flags);
snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (pdfr & 0xf0));
snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff);
snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff);
full_calib = 0;
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
if (full_calib) {
snd_wss_mce_up(chip);
@ -690,6 +708,24 @@ static void snd_wss_capture_format(struct snd_wss *chip,
full_calib = 0;
}
spin_unlock_irqrestore(&chip->reg_lock, flags);
} else if (chip->hardware == WSS_HW_AD1845) {
unsigned rate = params_rate(params);
/*
* Program the AD1845 correctly for the capture stream.
* Note that we do NOT need to toggle the MCE bit because
* the PLAYBACK_ENABLE bit of the Interface Configuration
* register is set.
*
* NOTE: We seem to need to write to the MSB before the LSB
* to get the correct sample frequency.
*/
spin_lock_irqsave(&chip->reg_lock, flags);
snd_wss_out(chip, CS4231_REC_FORMAT, (cdfr & 0xf0));
snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff);
snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff);
full_calib = 0;
spin_unlock_irqrestore(&chip->reg_lock, flags);
}
if (full_calib) {
snd_wss_mce_up(chip);
@ -1314,6 +1350,10 @@ static int snd_wss_probe(struct snd_wss *chip)
chip->image[CS4231_ALT_FEATURE_2] =
chip->hardware == WSS_HW_INTERWAVE ? 0xc2 : 0x01;
}
/* enable fine grained frequency selection */
if (chip->hardware == WSS_HW_AD1845)
chip->image[AD1845_PWR_DOWN] = 8;
ptr = (unsigned char *) &chip->image;
regnum = (chip->hardware & WSS_HW_AD1848_MASK) ? 16 : 32;
snd_wss_mce_down(chip);