diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 65f4f7c43136..ee654e95d8ad 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -22,7 +22,7 @@ Optional properties: width of 8 is assumed. - ti,nand-ecc-opt: A string setting the ECC layout to use. One of: - "sw" use "ham1" instead + "sw" 1-bit Hamming ecc code via software "hw" use "ham1" instead "hw-romcode" use "ham1" instead "ham1" 1-bit Hamming ecc code diff --git a/MAINTAINERS b/MAINTAINERS index 217dc542e808..cf24bb56bab9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1279,8 +1279,13 @@ M: Heiko Stuebner L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-rockchip@lists.infradead.org S: Maintained +F: arch/arm/boot/dts/rk3* F: arch/arm/mach-rockchip/ +F: drivers/clk/rockchip/ +F: drivers/i2c/busses/i2c-rk3x.c F: drivers/*/*rockchip* +F: drivers/*/*/*rockchip* +F: sound/soc/rockchip/ ARM/SAMSUNG ARM ARCHITECTURES M: Ben Dooks diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 97f603c4483d..d678152db4cb 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -245,7 +245,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@48055000 { @@ -256,7 +256,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@48057000 { @@ -267,7 +267,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@48059000 { @@ -278,7 +278,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { @@ -289,7 +289,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { @@ -300,7 +300,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@48051000 { @@ -311,7 +311,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio8: gpio@48053000 { @@ -322,7 +322,7 @@ gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index f1bbf9a32991..82d623d05915 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -28,6 +28,12 @@ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec >; }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ + >; + }; }; }; @@ -38,6 +44,8 @@ pmic: mc34708@8 { compatible = "fsl,mc34708"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <23 0x8>; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index c8e51dd41b8f..71598546087f 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -58,7 +58,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "On-board SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; @@ -181,11 +181,13 @@ }; &usbh1 { + disable-over-current; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { + disable-over-current; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; vbus-supply = <®_usbotg_vbus>; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index e8e781656b3f..6a524ca011e7 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -61,7 +61,7 @@ sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; + model = "Integrated SPDIF"; /* IMX6 doesn't implement this yet */ spdif-controller = <&spdif>; spdif-out; @@ -130,16 +130,23 @@ fsl,pins = ; }; + pinctrl_cubox_i_usbh1: cubox-i-usbh1 { + fsl,pins = ; + }; + pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { fsl,pins = ; }; - pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { + pinctrl_cubox_i_usbotg: cubox-i-usbotg { /* - * The Cubox-i pulls this low, but as it's pointless + * The Cubox-i pulls ID low, but as it's pointless * leaving it as a pull-up, even if it is just 10uA. */ - fsl,pins = ; + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; }; pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { @@ -173,13 +180,15 @@ }; &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_usbh1>; vbus-supply = <®_usbh1_vbus>; status = "okay"; }; &usbotg { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; + pinctrl-0 = <&pinctrl_cubox_i_usbotg>; vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index d16066608e21..db9f45b2c573 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -17,7 +17,7 @@ enet { pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 /* AR8035 reset */ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 3c3e6da1deac..a9aae88b74f5 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -292,6 +292,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &gpio1 { diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 02f69f4a8fd3..9bad94efe1c8 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -107,7 +107,7 @@ #address-cells = <1>; #size-cells = <1>; reg = <1 0 0x08000000>; - ti,nand-ecc-opt = "ham1"; + ti,nand-ecc-opt = "sw"; nand-bus-width = <8>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <36>; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index e67a23b5d788..58c27466f012 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -367,10 +367,12 @@ l3_iclk_div: l3_iclk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <4>; + reg = <0x100>; clocks = <&dpll_core_h12x2_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; gpu_l3_iclk: gpu_l3_iclk { @@ -383,10 +385,12 @@ l4_root_clk_div: l4_root_clk_div { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,divider-clock"; + ti,max-div = <2>; + ti,bit-shift = <8>; + reg = <0x100>; clocks = <&l3_iclk_div>; - clock-mult = <1>; - clock-div = <1>; + ti,index-power-of-two; }; slimbus1_slimbus_clk: slimbus1_slimbus_clk { diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 2e3bd3172b23..55eb35f068fb 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -83,10 +83,6 @@ regulator-always-on; }; - clk32kg: regulator-clk32kg { - compatible = "ti,twl6030-clk32kg"; - }; - twl_usb_comparator: usb-comparator { compatible = "ti,twl6030-usb"; interrupts = <4>, <10>; diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 67c492aabf4d..b19a39652545 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -36,5 +36,4 @@ obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o ifeq ($(CONFIG_ARCH_BRCMSTB),y) obj-y += brcmstb.o -obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o endif diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h deleted file mode 100644 index ec0c3d112b36..000000000000 --- a/arch/arm/mach-bcm/brcmstb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __BRCMSTB_H__ -#define __BRCMSTB_H__ - -void brcmstb_secondary_startup(void); - -#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S deleted file mode 100644 index 199c1ea58248..000000000000 --- a/arch/arm/mach-bcm/headsmp-brcmstb.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * SMP boot code for secondary CPUs - * Based on arch/arm/mach-tegra/headsmp.S - * - * Copyright (C) 2010 NVIDIA, Inc. - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include - - .section ".text.head", "ax" - -ENTRY(brcmstb_secondary_startup) - /* - * Ensure CPU is in a sane state by disabling all IRQs and switching - * into SVC mode. - */ - setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 - - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c deleted file mode 100644 index af780e9c23a6..000000000000 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Broadcom STB CPU SMP and hotplug support for ARM - * - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "brcmstb.h" - -enum { - ZONE_MAN_CLKEN_MASK = BIT(0), - ZONE_MAN_RESET_CNTL_MASK = BIT(1), - ZONE_MAN_MEM_PWR_MASK = BIT(4), - ZONE_RESERVED_1_MASK = BIT(5), - ZONE_MAN_ISO_CNTL_MASK = BIT(6), - ZONE_MANUAL_CONTROL_MASK = BIT(7), - ZONE_PWR_DN_REQ_MASK = BIT(9), - ZONE_PWR_UP_REQ_MASK = BIT(10), - ZONE_BLK_RST_ASSERT_MASK = BIT(12), - ZONE_PWR_OFF_STATE_MASK = BIT(25), - ZONE_PWR_ON_STATE_MASK = BIT(26), - ZONE_DPG_PWR_STATE_MASK = BIT(28), - ZONE_MEM_PWR_STATE_MASK = BIT(29), - ZONE_RESET_STATE_MASK = BIT(31), - CPU0_PWR_ZONE_CTRL_REG = 1, - CPU_RESET_CONFIG_REG = 2, -}; - -static void __iomem *cpubiuctrl_block; -static void __iomem *hif_cont_block; -static u32 cpu0_pwr_zone_ctrl_reg; -static u32 cpu_rst_cfg_reg; -static u32 hif_cont_reg; - -#ifdef CONFIG_HOTPLUG_CPU -static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state); - -static int per_cpu_sw_state_rd(u32 cpu) -{ - sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); - return per_cpu(per_cpu_sw_state, cpu); -} - -static void per_cpu_sw_state_wr(u32 cpu, int val) -{ - per_cpu(per_cpu_sw_state, cpu) = val; - dmb(); - sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu))); - dsb_sev(); -} -#else -static inline void per_cpu_sw_state_wr(u32 cpu, int val) { } -#endif - -static void __iomem *pwr_ctrl_get_base(u32 cpu) -{ - void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg; - base += (cpu_logical_map(cpu) * 4); - return base; -} - -static u32 pwr_ctrl_rd(u32 cpu) -{ - void __iomem *base = pwr_ctrl_get_base(cpu); - return readl_relaxed(base); -} - -static void pwr_ctrl_wr(u32 cpu, u32 val) -{ - void __iomem *base = pwr_ctrl_get_base(cpu); - writel(val, base); -} - -static void cpu_rst_cfg_set(u32 cpu, int set) -{ - u32 val; - val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg); - if (set) - val |= BIT(cpu_logical_map(cpu)); - else - val &= ~BIT(cpu_logical_map(cpu)); - writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg); -} - -static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr) -{ - const int reg_ofs = cpu_logical_map(cpu) * 8; - writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs); - writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs); -} - -static void brcmstb_cpu_boot(u32 cpu) -{ - pr_info("SMP: Booting CPU%d...\n", cpu); - - /* - * set the reset vector to point to the secondary_startup - * routine - */ - cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); - - /* unhalt the cpu */ - cpu_rst_cfg_set(cpu, 0); -} - -static void brcmstb_cpu_power_on(u32 cpu) -{ - /* - * The secondary cores power was cut, so we must go through - * power-on initialization. - */ - u32 tmp; - - pr_info("SMP: Powering up CPU%d...\n", cpu); - - /* Request zone power up */ - pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK); - - /* Wait for the power up FSM to complete */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_ON_STATE_MASK)); - - per_cpu_sw_state_wr(cpu, 1); -} - -static int brcmstb_cpu_get_power_state(u32 cpu) -{ - int tmp = pwr_ctrl_rd(cpu); - return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1; -} - -#ifdef CONFIG_HOTPLUG_CPU - -static void brcmstb_cpu_die(u32 cpu) -{ - v7_exit_coherency_flush(all); - - /* Prevent all interrupts from reaching this CPU. */ - arch_local_irq_disable(); - - /* - * Final full barrier to ensure everything before this instruction has - * quiesced. - */ - isb(); - dsb(); - - per_cpu_sw_state_wr(cpu, 0); - - /* Sit and wait to die */ - wfi(); - - /* We should never get here... */ - panic("Spurious interrupt on CPU %d received!\n", cpu); -} - -static int brcmstb_cpu_kill(u32 cpu) -{ - u32 tmp; - - pr_info("SMP: Powering down CPU%d...\n", cpu); - - while (per_cpu_sw_state_rd(cpu)) - ; - - /* Program zone reset */ - pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK | - ZONE_PWR_DN_REQ_MASK); - - /* Verify zone reset */ - tmp = pwr_ctrl_rd(cpu); - if (!(tmp & ZONE_RESET_STATE_MASK)) - pr_err("%s: Zone reset bit for CPU %d not asserted!\n", - __func__, cpu); - - /* Wait for power down */ - do { - tmp = pwr_ctrl_rd(cpu); - } while (!(tmp & ZONE_PWR_OFF_STATE_MASK)); - - /* Settle-time from Broadcom-internal DVT reference code */ - udelay(7); - - /* Assert reset on the CPU */ - cpu_rst_cfg_set(cpu, 1); - - return 1; -} - -#endif /* CONFIG_HOTPLUG_CPU */ - -static int __init setup_hifcpubiuctrl_regs(struct device_node *np) -{ - int rc = 0; - char *name; - struct device_node *syscon_np = NULL; - - name = "syscon-cpu"; - - syscon_np = of_parse_phandle(np, name, 0); - if (!syscon_np) { - pr_err("can't find phandle %s\n", name); - rc = -EINVAL; - goto cleanup; - } - - cpubiuctrl_block = of_iomap(syscon_np, 0); - if (!cpubiuctrl_block) { - pr_err("iomap failed for cpubiuctrl_block\n"); - rc = -EINVAL; - goto cleanup; - } - - rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG, - &cpu0_pwr_zone_ctrl_reg); - if (rc) { - pr_err("failed to read 1st entry from %s property (%d)\n", name, - rc); - rc = -EINVAL; - goto cleanup; - } - - rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG, - &cpu_rst_cfg_reg); - if (rc) { - pr_err("failed to read 2nd entry from %s property (%d)\n", name, - rc); - rc = -EINVAL; - goto cleanup; - } - -cleanup: - if (syscon_np) - of_node_put(syscon_np); - - return rc; -} - -static int __init setup_hifcont_regs(struct device_node *np) -{ - int rc = 0; - char *name; - struct device_node *syscon_np = NULL; - - name = "syscon-cont"; - - syscon_np = of_parse_phandle(np, name, 0); - if (!syscon_np) { - pr_err("can't find phandle %s\n", name); - rc = -EINVAL; - goto cleanup; - } - - hif_cont_block = of_iomap(syscon_np, 0); - if (!hif_cont_block) { - pr_err("iomap failed for hif_cont_block\n"); - rc = -EINVAL; - goto cleanup; - } - - /* offset is at top of hif_cont_block */ - hif_cont_reg = 0; - -cleanup: - if (syscon_np) - of_node_put(syscon_np); - - return rc; -} - -static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) -{ - int rc; - struct device_node *np; - char *name; - - name = "brcm,brcmstb-smpboot"; - np = of_find_compatible_node(NULL, NULL, name); - if (!np) { - pr_err("can't find compatible node %s\n", name); - return; - } - - rc = setup_hifcpubiuctrl_regs(np); - if (rc) - return; - - rc = setup_hifcont_regs(np); - if (rc) - return; -} - -static DEFINE_SPINLOCK(boot_lock); - -static void brcmstb_secondary_init(unsigned int cpu) -{ - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* Bring up power to the core if necessary */ - if (brcmstb_cpu_get_power_state(cpu) == 0) - brcmstb_cpu_power_on(cpu); - - brcmstb_cpu_boot(cpu); - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return 0; -} - -static struct smp_operations brcmstb_smp_ops __initdata = { - .smp_prepare_cpus = brcmstb_cpu_ctrl_setup, - .smp_secondary_init = brcmstb_secondary_init, - .smp_boot_secondary = brcmstb_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_kill = brcmstb_cpu_kill, - .cpu_die = brcmstb_cpu_die, -#endif -}; - -CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops); diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e87f2a83d6bf..2d245c2e641c 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 8897ad7035fd..cb7764314f17 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -49,7 +49,8 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) return 0; /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ - if (ecc_opt == OMAP_ECC_HAM1_CODE_HW) + if (ecc_opt == OMAP_ECC_HAM1_CODE_HW || + ecc_opt == OMAP_ECC_HAM1_CODE_SW) return 1; else return 0; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8bc13380f0a0..9f42d5437fcc 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1403,8 +1403,11 @@ static int gpmc_probe_nand_child(struct platform_device *pdev, pr_err("%s: ti,nand-ecc-opt not found\n", __func__); return -ENODEV; } - if (!strcmp(s, "ham1") || !strcmp(s, "sw") || - !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) + + if (!strcmp(s, "sw")) + gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW; + else if (!strcmp(s, "ham1") || + !strcmp(s, "hw") || !strcmp(s, "hw-romcode")) gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_HW; else if (!strcmp(s, "bch4")) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d42022f2a71e..53841dea80ea 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -663,7 +663,7 @@ void __init dra7xxx_check_revision(void) default: /* Unknown default to latest silicon rev as default*/ - pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", + pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n", __func__, idcode, hawkeye, rev); omap_revision = DRA752_REV_ES1_1; } diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 01ef59def44b..d22c30d3ccfa 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -56,7 +56,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias); if (!IS_ERR(r)) { - dev_warn(&od->pdev->dev, + dev_dbg(&od->pdev->dev, "alias %s already exists\n", clk_alias); clk_put(r); return; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6c074f37cdd2..8fd87a3055bf 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2185,6 +2185,8 @@ static int _enable(struct omap_hwmod *oh) oh->mux->pads_dynamic))) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); _reconfigure_io_chain(); + } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + _reconfigure_io_chain(); } _add_initiator_dep(oh, mpu_oh); @@ -2291,6 +2293,8 @@ static int _idle(struct omap_hwmod *oh) if (oh->mux && oh->mux->pads_dynamic) { omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE); _reconfigure_io_chain(); + } else if (oh->flags & HWMOD_FORCE_MSTANDBY) { + _reconfigure_io_chain(); } oh->_state = _HWMOD_STATE_IDLE; @@ -3345,6 +3349,9 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois) if (!ois) return 0; + if (ois[0] == NULL) /* Empty list */ + return 0; + if (!linkspace) { if (_alloc_linkspace(ois)) { pr_err("omap_hwmod: could not allocate link space\n"); diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 2757abf87fbc..5684f112654b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -35,6 +35,7 @@ #include "i2c.h" #include "mmc.h" #include "wd_timer.h" +#include "soc.h" /* Base offset for all DRA7XX interrupts external to MPUSS */ #define DRA7XX_IRQ_GIC_START 32 @@ -3261,7 +3262,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_per3__usb_otg_ss1, &dra7xx_l4_per3__usb_otg_ss2, &dra7xx_l4_per3__usb_otg_ss3, - &dra7xx_l4_per3__usb_otg_ss4, &dra7xx_l3_main_1__vcp1, &dra7xx_l4_per2__vcp1, &dra7xx_l3_main_1__vcp2, @@ -3270,8 +3270,26 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { NULL, }; +static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = { + &dra7xx_l4_per3__usb_otg_ss4, + NULL, +}; + +static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = { + NULL, +}; + int __init dra7xx_hwmod_init(void) { + int ret; + omap_hwmod_init(); - return omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); + ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); + + if (!ret && soc_is_dra74x()) + return omap_hwmod_register_links(dra74x_hwmod_ocp_ifs); + else if (!ret && soc_is_dra72x()) + return omap_hwmod_register_links(dra72x_hwmod_ocp_ifs); + + return ret; } diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 01ca8086fb6c..4376f59626d1 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -245,6 +245,8 @@ IS_AM_SUBCLASS(437x, 0x437) #define soc_is_omap54xx() 0 #define soc_is_omap543x() 0 #define soc_is_dra7xx() 0 +#define soc_is_dra74x() 0 +#define soc_is_dra72x() 0 #if defined(MULTI_OMAP2) # if defined(CONFIG_ARCH_OMAP2) @@ -393,7 +395,11 @@ IS_OMAP_TYPE(3430, 0x3430) #if defined(CONFIG_SOC_DRA7XX) #undef soc_is_dra7xx +#undef soc_is_dra74x +#undef soc_is_dra72x #define soc_is_dra7xx() (of_machine_is_compatible("ti,dra7")) +#define soc_is_dra74x() (of_machine_is_compatible("ti,dra74")) +#define soc_is_dra72x() (of_machine_is_compatible("ti,dra72")) #endif /* Various silicon revisions for omap2 */ diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 17435c1aa2fe..126ddafad526 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -183,8 +183,8 @@ enum { static struct clk div4_clks[DIV4_NR] = { [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT), - [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1de0, CLK_ENABLE_ON_INIT), + [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT), + [DIV4_SD1] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 0, 0x1df0, CLK_ENABLE_ON_INIT), }; /* DIV6 clocks */ diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index 10e193d707f5..453b23129cfa 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -152,7 +152,7 @@ enum { static struct clk div4_clks[DIV4_NR] = { [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT), - [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT), + [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT), }; /* DIV6 clocks */ diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index d8c4048b9e33..02a6f45a0b9e 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -644,7 +644,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("e6cb0000.serial", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ - CLKDEV_DEV_ID("0xe6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("e6c3000.serial", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("e6c40000.serial", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 2c2754e79cb3..f61158c6ce71 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -426,9 +426,15 @@ static int ve_spc_populate_opps(uint32_t cluster) static int ve_init_opp_table(struct device *cpu_dev) { - int cluster = topology_physical_package_id(cpu_dev->id); - int idx, ret = 0, max_opp = info->num_opps[cluster]; - struct ve_spc_opp *opps = info->opps[cluster]; + int cluster; + int idx, ret = 0, max_opp; + struct ve_spc_opp *opps; + + cluster = topology_physical_package_id(cpu_dev->id); + cluster = cluster < 0 ? 0 : cluster; + + max_opp = info->num_opps[cluster]; + opps = info->opps[cluster]; for (idx = 0; idx < max_opp; idx++, opps++) { ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt); @@ -537,6 +543,8 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev) spc->hw.init = &init; spc->cluster = topology_physical_package_id(cpu_dev->id); + spc->cluster = spc->cluster < 0 ? 0 : spc->cluster; + init.name = dev_name(cpu_dev); init.ops = &clk_spc_ops; init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE; diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index f0ed92e210a1..5967b385141b 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -931,7 +931,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u32 val; val = readl(info->reg.gpmc_ecc_config); - if (((val >> ECC_CONFIG_CS_SHIFT) & ~CS_MASK) != info->gpmc_cs) + if (((val >> ECC_CONFIG_CS_SHIFT) & CS_MASK) != info->gpmc_cs) return -EINVAL; /* read ecc result */ @@ -1794,9 +1794,12 @@ static int omap_nand_probe(struct platform_device *pdev) } /* populate MTD interface based on ECC scheme */ - nand_chip->ecc.layout = &omap_oobinfo; ecclayout = &omap_oobinfo; switch (info->ecc_opt) { + case OMAP_ECC_HAM1_CODE_SW: + nand_chip->ecc.mode = NAND_ECC_SOFT; + break; + case OMAP_ECC_HAM1_CODE_HW: pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n"); nand_chip->ecc.mode = NAND_ECC_HW; @@ -1848,7 +1851,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, nand_chip->ecc.bytes, - &nand_chip->ecc.layout); + &ecclayout); if (!nand_chip->ecc.priv) { pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; @@ -1923,7 +1926,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, nand_chip->ecc.bytes, - &nand_chip->ecc.layout); + &ecclayout); if (!nand_chip->ecc.priv) { pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; @@ -2012,6 +2015,9 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; } + if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) + goto scan_tail; + /* all OOB bytes from oobfree->offset till end off OOB are free */ ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset; /* check if NAND device's OOB is enough to store ECC signatures */ @@ -2021,7 +2027,9 @@ static int omap_nand_probe(struct platform_device *pdev) err = -EINVAL; goto return_error; } + nand_chip->ecc.layout = ecclayout; +scan_tail: /* second phase scan */ if (nand_scan_tail(mtd)) { err = -ENXIO; diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 660c029d694f..16ec262dfcc8 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -21,8 +21,17 @@ enum nand_io { }; enum omap_ecc { - /* 1-bit ECC calculation by GPMC, Error detection by Software */ - OMAP_ECC_HAM1_CODE_HW = 0, + /* + * 1-bit ECC: calculation and correction by SW + * ECC stored at end of spare area + */ + OMAP_ECC_HAM1_CODE_SW = 0, + + /* + * 1-bit ECC: calculation by GPMC, Error detection by Software + * ECC layout compatible with ROM code layout + */ + OMAP_ECC_HAM1_CODE_HW, /* 4-bit ECC calculation by GPMC, Error detection by Software */ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, /* 4-bit ECC calculation by GPMC, Error detection by ELM */