power: bq24735-charger: fix failed i2c with ac-detect

When an ac-detect pin exists, but the charger is not plugged in,
the chip will not respond to i2c messages, causing the module to
fail when inserted.

Signed-off-by: Jonathan Tinkham <sctincman@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit is contained in:
Jonathan Tinkham 2016-02-02 23:03:44 -07:00 committed by Sebastian Reichel
parent 4f4bfe6bf1
commit 1a3adce1c2
1 changed files with 24 additions and 21 deletions

View File

@ -381,27 +381,6 @@ static int bq24735_charger_probe(struct i2c_client *client,
i2c_set_clientdata(client, charger);
ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
if (ret < 0) {
dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
ret);
return ret;
} else if (ret != 0x0040) {
dev_err(&client->dev,
"manufacturer id mismatch. 0x0040 != 0x%04x\n", ret);
return -ENODEV;
}
ret = bq24735_read_word(client, BQ24735_DEVICE_ID);
if (ret < 0) {
dev_err(&client->dev, "Failed to read device id : %d\n", ret);
return ret;
} else if (ret != 0x000B) {
dev_err(&client->dev,
"device id mismatch. 0x000b != 0x%04x\n", ret);
return -ENODEV;
}
if (gpio_is_valid(charger->pdata->status_gpio)) {
ret = devm_gpio_request(&client->dev,
charger->pdata->status_gpio,
@ -415,6 +394,30 @@ static int bq24735_charger_probe(struct i2c_client *client,
charger->pdata->status_gpio_valid = !ret;
}
if (!charger->pdata->status_gpio_valid
|| bq24735_charger_is_present(charger)) {
ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
if (ret < 0) {
dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
ret);
return ret;
} else if (ret != 0x0040) {
dev_err(&client->dev,
"manufacturer id mismatch. 0x0040 != 0x%04x\n", ret);
return -ENODEV;
}
ret = bq24735_read_word(client, BQ24735_DEVICE_ID);
if (ret < 0) {
dev_err(&client->dev, "Failed to read device id : %d\n", ret);
return ret;
} else if (ret != 0x000B) {
dev_err(&client->dev,
"device id mismatch. 0x000b != 0x%04x\n", ret);
return -ENODEV;
}
}
ret = bq24735_config_charger(charger);
if (ret < 0) {
dev_err(&client->dev, "failed in configuring charger");