diff --git a/Documentation/networking/xfrm_sync.txt b/Documentation/networking/xfrm_sync.txt new file mode 100644 index 000000000000..8be626f7c0b8 --- /dev/null +++ b/Documentation/networking/xfrm_sync.txt @@ -0,0 +1,166 @@ + +The sync patches work is based on initial patches from +Krisztian and others and additional patches +from Jamal . + +The end goal for syncing is to be able to insert attributes + generate +events so that the an SA can be safely moved from one machine to another +for HA purposes. +The idea is to synchronize the SA so that the takeover machine can do +the processing of the SA as accurate as possible if it has access to it. + +We already have the ability to generate SA add/del/upd events. +These patches add ability to sync and have accurate lifetime byte (to +ensure proper decay of SAs) and replay counters to avoid replay attacks +with as minimal loss at failover time. +This way a backup stays as closely uptodate as an active member. + +Because the above items change for every packet the SA receives, +it is possible for a lot of the events to be generated. +For this reason, we also add a nagle-like algorithm to restrict +the events. i.e we are going to set thresholds to say "let me +know if the replay sequence threshold is reached or 10 secs have passed" +These thresholds are set system-wide via sysctls or can be updated +per SA. + +The identified items that need to be synchronized are: +- the lifetime byte counter +note that: lifetime time limit is not important if you assume the failover +machine is known ahead of time since the decay of the time countdown +is not driven by packet arrival. +- the replay sequence for both inbound and outbound + +1) Message Structure +---------------------- + +nlmsghdr:aevent_id:optional-TLVs. + +The netlink message types are: + +XFRM_MSG_NEWAE and XFRM_MSG_GETAE. + +A XFRM_MSG_GETAE does not have TLVs. +A XFRM_MSG_NEWAE will have at least two TLVs (as is +discussed further below). + +aevent_id structure looks like: + + struct xfrm_aevent_id { + struct xfrm_usersa_id sa_id; + __u32 flags; + }; + +xfrm_usersa_id in this message layout identifies the SA. + +flags are used to indicate different things. The possible +flags are: + XFRM_AE_RTHR=1, /* replay threshold*/ + XFRM_AE_RVAL=2, /* replay value */ + XFRM_AE_LVAL=4, /* lifetime value */ + XFRM_AE_ETHR=8, /* expiry timer threshold */ + XFRM_AE_CR=16, /* Event cause is replay update */ + XFRM_AE_CE=32, /* Event cause is timer expiry */ + XFRM_AE_CU=64, /* Event cause is policy update */ + +How these flags are used is dependent on the direction of the +message (kernel<->user) as well the cause (config, query or event). +This is described below in the different messages. + +The pid will be set appropriately in netlink to recognize direction +(0 to the kernel and pid = processid that created the event +when going from kernel to user space) + +A program needs to subscribe to multicast group XFRMNLGRP_AEVENTS +to get notified of these events. + +2) TLVS reflect the different parameters: +----------------------------------------- + +a) byte value (XFRMA_LTIME_VAL) +This TLV carries the running/current counter for byte lifetime since +last event. + +b)replay value (XFRMA_REPLAY_VAL) +This TLV carries the running/current counter for replay sequence since +last event. + +c)replay threshold (XFRMA_REPLAY_THRESH) +This TLV carries the threshold being used by the kernel to trigger events +when the replay sequence is exceeded. + +d) expiry timer (XFRMA_ETIMER_THRESH) +This is a timer value in milliseconds which is used as the nagle +value to rate limit the events. + +3) Default configurations for the parameters: +---------------------------------------------- + +By default these events should be turned off unless there is +at least one listener registered to listen to the multicast +group XFRMNLGRP_AEVENTS. + +Programs installing SAs will need to specify the two thresholds, however, +in order to not change existing applications such as racoon +we also provide default threshold values for these different parameters +in case they are not specified. + +the two sysctls/proc entries are: +a) /proc/sys/net/core/sysctl_xfrm_aevent_etime +used to provide default values for the XFRMA_ETIMER_THRESH in incremental +units of time of 100ms. The default is 10 (1 second) + +b) /proc/sys/net/core/sysctl_xfrm_aevent_rseqth +used to provide default values for XFRMA_REPLAY_THRESH parameter +in incremental packet count. The default is two packets. + +4) Message types +---------------- + +a) XFRM_MSG_GETAE issued by user-->kernel. +XFRM_MSG_GETAE does not carry any TLVs. +The response is a XFRM_MSG_NEWAE which is formatted based on what +XFRM_MSG_GETAE queried for. +The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. +*if XFRM_AE_RTHR flag is set, then XFRMA_REPLAY_THRESH is also retrieved +*if XFRM_AE_ETHR flag is set, then XFRMA_ETIMER_THRESH is also retrieved + +b) XFRM_MSG_NEWAE is issued by either user space to configure +or kernel to announce events or respond to a XFRM_MSG_GETAE. + +i) user --> kernel to configure a specific SA. +any of the values or threshold parameters can be updated by passing the +appropriate TLV. +A response is issued back to the sender in user space to indicate success +or failure. +In the case of success, additionally an event with +XFRM_MSG_NEWAE is also issued to any listeners as described in iii). + +ii) kernel->user direction as a response to XFRM_MSG_GETAE +The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. +The threshold TLVs will be included if explicitly requested in +the XFRM_MSG_GETAE message. + +iii) kernel->user to report as event if someone sets any values or +thresholds for an SA using XFRM_MSG_NEWAE (as described in #i above). +In such a case XFRM_AE_CU flag is set to inform the user that +the change happened as a result of an update. +The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. + +iv) kernel->user to report event when replay threshold or a timeout +is exceeded. +In such a case either XFRM_AE_CR (replay exceeded) or XFRM_AE_CE (timeout +happened) is set to inform the user what happened. +Note the two flags are mutually exclusive. +The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. + +Exceptions to threshold settings +-------------------------------- + +If you have an SA that is getting hit by traffic in bursts such that +there is a period where the timer threshold expires with no packets +seen, then an odd behavior is seen as follows: +The first packet arrival after a timer expiry will trigger a timeout +aevent; i.e we dont wait for a timeout period or a packet threshold +to be reached. This is done for simplicity and efficiency reasons. + +-JHS diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 606243d11793..96bdb73c2283 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1815,14 +1815,14 @@ static int irda_usb_probe(struct usb_interface *intf, self->needspatch = (ret < 0); if (ret < 0) { printk("patch_device failed\n"); - goto err_out_4; + goto err_out_5; } /* replace IrDA class descriptor with what patched device is now reporting */ irda_desc = irda_usb_find_class_desc (self->usbintf); if (irda_desc == NULL) { ret = -ENODEV; - goto err_out_4; + goto err_out_5; } if (self->irda_desc) kfree (self->irda_desc); @@ -1832,6 +1832,8 @@ static int irda_usb_probe(struct usb_interface *intf, return 0; +err_out_5: + unregister_netdev(self->netdev); err_out_4: kfree(self->speed_buff); err_out_3: diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index bbcfc8ec35a1..58f76cefbc83 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -225,6 +225,8 @@ static int __init smsc_superio_lpc(unsigned short cfg_base); #ifdef CONFIG_PCI static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf); static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); +static void __init preconfigure_ali_port(struct pci_dev *dev, + unsigned short port); static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, unsigned short ircc_fir, @@ -2327,9 +2329,14 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) * pre-configuration not properly done by the BIOS (especially laptops) * This code is based in part on smcinit.c, tosh1800-smcinit.c * and tosh2450-smcinit.c. The table lists the device entries - * for ISA bridges with an LPC (Local Peripheral Configurator) - * that are in turn used to configure the SMSC device with default - * SIR and FIR I/O ports, DMA and IRQ. + * for ISA bridges with an LPC (Low Pin Count) controller which + * handles the communication with the SMSC device. After the LPC + * controller is initialized through PCI, the SMSC device is initialized + * through a dedicated port in the ISA port-mapped I/O area, this latter + * area is used to configure the SMSC device with default + * SIR and FIR I/O ports, DMA and IRQ. Different vendors have + * used different sets of parameters and different control port + * addresses making a subsystem device table necessary. */ #ifdef CONFIG_PCI #define PCIID_VENDOR_INTEL 0x8086 @@ -2340,9 +2347,10 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev .device = 0x24cc, .subvendor = 0x103c, .subdevice = 0x088c, - .sir_io = 0x02f8, /* Quite certain these are the same for nc8000 as for nc6000 */ + /* Quite certain these are the same for nc8000 as for nc6000 */ + .sir_io = 0x02f8, .fir_io = 0x0130, - .fir_irq = 0x09, + .fir_irq = 0x05, .fir_dma = 0x03, .cfg_base = 0x004e, .preconfigure = preconfigure_through_82801, @@ -2355,60 +2363,79 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev .subdevice = 0x0890, .sir_io = 0x02f8, .fir_io = 0x0130, - .fir_irq = 0x09, + .fir_irq = 0x05, .fir_dma = 0x03, .cfg_base = 0x004e, .preconfigure = preconfigure_through_82801, .name = "HP nc6000", }, { - .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */ + /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */ + .vendor = PCIID_VENDOR_INTEL, .device = 0x24c0, .subvendor = 0x1179, - .subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */ + .subdevice = 0xffff, /* 0xffff is "any" */ .sir_io = 0x03f8, .fir_io = 0x0130, .fir_irq = 0x07, .fir_dma = 0x01, .cfg_base = 0x002e, .preconfigure = preconfigure_through_82801, - .name = "Toshiba Satellite 2450", + .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge", }, { .vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */ - .device = 0x248c, /* Some use 24cc? */ + .device = 0x248c, .subvendor = 0x1179, - .subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */ + .subdevice = 0xffff, /* 0xffff is "any" */ .sir_io = 0x03f8, .fir_io = 0x0130, .fir_irq = 0x03, .fir_dma = 0x03, .cfg_base = 0x002e, .preconfigure = preconfigure_through_82801, - .name = "Toshiba Satellite 5100/5200, Tecra 9100", + .name = "Toshiba laptop with Intel 82801CAM ISA bridge", }, { - .vendor = PCIID_VENDOR_ALI, /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */ + /* 82801DBM (ICH4-M) LPC Interface Bridge */ + .vendor = PCIID_VENDOR_INTEL, + .device = 0x24cc, + .subvendor = 0x1179, + .subdevice = 0xffff, /* 0xffff is "any" */ + .sir_io = 0x03f8, + .fir_io = 0x0130, + .fir_irq = 0x03, + .fir_dma = 0x03, + .cfg_base = 0x002e, + .preconfigure = preconfigure_through_82801, + .name = "Toshiba laptop with Intel 8281DBM LPC bridge", + }, + { + /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */ + .vendor = PCIID_VENDOR_ALI, .device = 0x1533, .subvendor = 0x1179, - .subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */ + .subdevice = 0xffff, /* 0xffff is "any" */ .sir_io = 0x02e8, .fir_io = 0x02f8, .fir_irq = 0x07, .fir_dma = 0x03, .cfg_base = 0x002e, .preconfigure = preconfigure_through_ali, - .name = "Toshiba Satellite 1800", + .name = "Toshiba laptop with ALi ISA bridge", }, { } // Terminator }; /* - * This sets up the basic SMSC parameters (FIR port, SIR port, FIR DMA, FIR IRQ) + * This sets up the basic SMSC parameters + * (FIR port, SIR port, FIR DMA, FIR IRQ) * through the chip configuration port. */ -static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf) +static int __init preconfigure_smsc_chip(struct + smsc_ircc_subsystem_configuration + *conf) { unsigned short iobase = conf->cfg_base; unsigned char tmpbyte; @@ -2416,7 +2443,9 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID tmpbyte = inb(iobase +1); // Read device ID - IRDA_DEBUG(0, "Detected Chip id: 0x%02x, setting up registers...\n",tmpbyte); + IRDA_DEBUG(0, + "Detected Chip id: 0x%02x, setting up registers...\n", + tmpbyte); /* Disable UART1 and set up SIR I/O port */ outb(0x24, iobase); // select CR24 - UART1 base addr @@ -2426,6 +2455,7 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio tmpbyte = inb(iobase + 1); if (tmpbyte != (conf->sir_io >> 2) ) { IRDA_WARNING("ERROR: could not configure SIR ioport.\n"); + IRDA_WARNING("Try to supply ircc_cfg argument.\n"); return -ENXIO; } @@ -2461,7 +2491,8 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase); // CR0C - UART mode tmpbyte = inb(iobase + 1); - tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK | SMSCSIOFLAT_UART2MODE_VAL_IRDA; + tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK | + SMSCSIOFLAT_UART2MODE_VAL_IRDA; outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed outb(LPC47N227_APMBOOTDRIVE_REG, iobase); // CR07 - Auto Pwr Mgt/boot drive sel @@ -2486,53 +2517,226 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio return 0; } -/* 82801CAM registers */ +/* 82801CAM generic registers */ #define VID 0x00 #define DID 0x02 -#define PIRQA_ROUT 0x60 +#define PIRQ_A_D_ROUT 0x60 +#define SIRQ_CNTL 0x64 +#define PIRQ_E_H_ROUT 0x68 #define PCI_DMA_C 0x90 +/* LPC-specific registers */ #define COM_DEC 0xe0 +#define GEN1_DEC 0xe4 #define LPC_EN 0xe6 #define GEN2_DEC 0xec /* - * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge or - * Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. They all work the same way! + * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge + * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. + * They all work the same way! */ static int __init preconfigure_through_82801(struct pci_dev *dev, - struct smsc_ircc_subsystem_configuration *conf) + struct + smsc_ircc_subsystem_configuration + *conf) { unsigned short tmpword; - int ret; + unsigned char tmpbyte; - IRDA_MESSAGE("Setting up the SMSC device via the 82801 controller.\n"); - pci_write_config_byte(dev, COM_DEC, 0x10); + IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n"); + /* + * Select the range for the COMA COM port (SIR) + * Register COM_DEC: + * Bit 7: reserved + * Bit 6-4, COMB decode range + * Bit 3: reserved + * Bit 2-0, COMA decode range + * + * Decode ranges: + * 000 = 0x3f8-0x3ff (COM1) + * 001 = 0x2f8-0x2ff (COM2) + * 010 = 0x220-0x227 + * 011 = 0x228-0x22f + * 100 = 0x238-0x23f + * 101 = 0x2e8-0x2ef (COM4) + * 110 = 0x338-0x33f + * 111 = 0x3e8-0x3ef (COM3) + */ + pci_read_config_byte(dev, COM_DEC, &tmpbyte); + tmpbyte &= 0xf8; /* mask COMA bits */ + switch(conf->sir_io) { + case 0x3f8: + tmpbyte |= 0x00; + break; + case 0x2f8: + tmpbyte |= 0x01; + break; + case 0x220: + tmpbyte |= 0x02; + break; + case 0x228: + tmpbyte |= 0x03; + break; + case 0x238: + tmpbyte |= 0x04; + break; + case 0x2e8: + tmpbyte |= 0x05; + break; + case 0x338: + tmpbyte |= 0x06; + break; + case 0x3e8: + tmpbyte |= 0x07; + break; + default: + tmpbyte |= 0x01; /* COM2 default */ + } + IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte); + pci_write_config_byte(dev, COM_DEC, tmpbyte); - /* Enable LPC */ - pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */ - tmpword &= 0xfffd; /* mask bit 1 */ - tmpword |= 0x0001; /* set bit 0 : COMA addr range enable */ + /* Enable Low Pin Count interface */ + pci_read_config_word(dev, LPC_EN, &tmpword); + /* These seem to be set up at all times, + * just make sure it is properly set. + */ + switch(conf->cfg_base) { + case 0x04e: + tmpword |= 0x2000; + break; + case 0x02e: + tmpword |= 0x1000; + break; + case 0x062: + tmpword |= 0x0800; + break; + case 0x060: + tmpword |= 0x0400; + break; + default: + IRDA_WARNING("Uncommon I/O base address: 0x%04x\n", + conf->cfg_base); + break; + } + tmpword &= 0xfffd; /* disable LPC COMB */ + tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */ + IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword); pci_write_config_word(dev, LPC_EN, tmpword); - /* Setup DMA */ - pci_write_config_word(dev, PCI_DMA_C, 0xc0c0); /* LPC I/F DMA on, channel 3 -- rtm (?? PCI DMA ?) */ - pci_write_config_word(dev, GEN2_DEC, 0x131); /* LPC I/F 2nd decode range */ + /* + * Configure LPC DMA channel + * PCI_DMA_C bits: + * Bit 15-14: DMA channel 7 select + * Bit 13-12: DMA channel 6 select + * Bit 11-10: DMA channel 5 select + * Bit 9-8: Reserved + * Bit 7-6: DMA channel 3 select + * Bit 5-4: DMA channel 2 select + * Bit 3-2: DMA channel 1 select + * Bit 1-0: DMA channel 0 select + * 00 = Reserved value + * 01 = PC/PCI DMA + * 10 = Reserved value + * 11 = LPC I/F DMA + */ + pci_read_config_word(dev, PCI_DMA_C, &tmpword); + switch(conf->fir_dma) { + case 0x07: + tmpword |= 0xc000; + break; + case 0x06: + tmpword |= 0x3000; + break; + case 0x05: + tmpword |= 0x0c00; + break; + case 0x03: + tmpword |= 0x00c0; + break; + case 0x02: + tmpword |= 0x0030; + break; + case 0x01: + tmpword |= 0x000c; + break; + case 0x00: + tmpword |= 0x0003; + break; + default: + break; /* do not change settings */ + } + IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword); + pci_write_config_word(dev, PCI_DMA_C, tmpword); + + /* + * GEN2_DEC bits: + * Bit 15-4: Generic I/O range + * Bit 3-1: reserved (read as 0) + * Bit 0: enable GEN2 range on LPC I/F + */ + tmpword = conf->fir_io & 0xfff8; + tmpword |= 0x0001; + IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword); + pci_write_config_word(dev, GEN2_DEC, tmpword); /* Pre-configure chip */ - ret = preconfigure_smsc_chip(conf); + return preconfigure_smsc_chip(conf); +} - /* Disable LPC */ - pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */ - tmpword &= 0xfffc; /* mask bit 1 and bit 0, COMA addr range disable */ - pci_write_config_word(dev, LPC_EN, tmpword); - return ret; +/* + * Pre-configure a certain port on the ALi 1533 bridge. + * This is based on reverse-engineering since ALi does not + * provide any data sheet for the 1533 chip. + */ +static void __init preconfigure_ali_port(struct pci_dev *dev, + unsigned short port) +{ + unsigned char reg; + /* These bits obviously control the different ports */ + unsigned char mask; + unsigned char tmpbyte; + + switch(port) { + case 0x0130: + case 0x0178: + reg = 0xb0; + mask = 0x80; + break; + case 0x03f8: + reg = 0xb4; + mask = 0x80; + break; + case 0x02f8: + reg = 0xb4; + mask = 0x30; + break; + case 0x02e8: + reg = 0xb4; + mask = 0x08; + break; + default: + IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port); + return; + } + + pci_read_config_byte(dev, reg, &tmpbyte); + /* Turn on the right bits */ + tmpbyte |= mask; + pci_write_config_byte(dev, reg, tmpbyte); + IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port); + return; } static int __init preconfigure_through_ali(struct pci_dev *dev, - struct smsc_ircc_subsystem_configuration *conf) + struct + smsc_ircc_subsystem_configuration + *conf) { - /* TODO: put in ALi 1533 configuration here. */ - IRDA_MESSAGE("SORRY: %s has an unsupported bridge controller (ALi): not pre-configured.\n", conf->name); - return -ENODEV; + /* Configure the two ports on the ALi 1533 */ + preconfigure_ali_port(dev, conf->sir_io); + preconfigure_ali_port(dev, conf->fir_io); + + /* Pre-configure chip */ + return preconfigure_smsc_chip(conf); } static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, @@ -2552,9 +2756,10 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, struct smsc_ircc_subsystem_configuration *conf; /* - * Cache the subsystem vendor/device: some manufacturers fail to set - * this for all components, so we save it in case there is just - * 0x0000 0x0000 on the device we want to check. + * Cache the subsystem vendor/device: + * some manufacturers fail to set this for all components, + * so we save it in case there is just 0x0000 0x0000 on the + * device we want to check. */ if (dev->subsystem_vendor != 0x0000U) { ss_vendor = dev->subsystem_vendor; @@ -2564,13 +2769,20 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, for( ; conf->subvendor; conf++) { if(conf->vendor == dev->vendor && conf->device == dev->device && - conf->subvendor == ss_vendor && /* Sometimes these are cached values */ - (conf->subdevice == ss_device || conf->subdevice == 0xffff)) { - struct smsc_ircc_subsystem_configuration tmpconf; + conf->subvendor == ss_vendor && + /* Sometimes these are cached values */ + (conf->subdevice == ss_device || + conf->subdevice == 0xffff)) { + struct smsc_ircc_subsystem_configuration + tmpconf; - memcpy(&tmpconf, conf, sizeof(struct smsc_ircc_subsystem_configuration)); + memcpy(&tmpconf, conf, + sizeof(struct smsc_ircc_subsystem_configuration)); - /* Override the default values with anything passed in as parameter */ + /* + * Override the default values with anything + * passed in as parameter + */ if (ircc_cfg != 0) tmpconf.cfg_base = ircc_cfg; if (ircc_fir != 0) diff --git a/include/net/arp.h b/include/net/arp.h index a13e30c35f42..643bded9f557 100644 --- a/include/net/arp.h +++ b/include/net/arp.h @@ -10,8 +10,6 @@ extern struct neigh_table arp_tbl; extern void arp_init(void); -extern int arp_rcv(struct sk_buff *skb, struct net_device *dev, - struct packet_type *pt, struct net_device *orig_dev); extern int arp_find(unsigned char *haddr, struct sk_buff *skb); extern int arp_ioctl(unsigned int cmd, void __user *arg); extern void arp_send(int type, int ptype, u32 dest_ip, diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 0d5529c382e8..afa508d92c93 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -143,6 +143,11 @@ struct xfrm_state /* Replay detection state at the time we sent the last notification */ struct xfrm_replay_state preplay; + /* internal flag that only holds state for delayed aevent at the + * moment + */ + u32 xflags; + /* Replay detection notification settings */ u32 replay_maxage; u32 replay_maxdiff; @@ -168,6 +173,9 @@ struct xfrm_state void *data; }; +/* xflags - make enum if more show up */ +#define XFRM_TIME_DEFER 1 + enum { XFRM_STATE_VOID, XFRM_STATE_ACQ, diff --git a/net/atm/clip.c b/net/atm/clip.c index 3ab4e7947bab..1a786bfaa416 100644 --- a/net/atm/clip.c +++ b/net/atm/clip.c @@ -2,7 +2,6 @@ /* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - #include #include #include @@ -54,24 +53,24 @@ static struct net_device *clip_devs; static struct atm_vcc *atmarpd; static struct neigh_table clip_tbl; static struct timer_list idle_timer; -static int start_timer = 1; - -static int to_atmarpd(enum atmarp_ctrl_type type,int itf,unsigned long ip) +static int to_atmarpd(enum atmarp_ctrl_type type, int itf, unsigned long ip) { struct sock *sk; struct atmarp_ctrl *ctrl; struct sk_buff *skb; - DPRINTK("to_atmarpd(%d)\n",type); - if (!atmarpd) return -EUNATCH; + DPRINTK("to_atmarpd(%d)\n", type); + if (!atmarpd) + return -EUNATCH; skb = alloc_skb(sizeof(struct atmarp_ctrl),GFP_ATOMIC); - if (!skb) return -ENOMEM; + if (!skb) + return -ENOMEM; ctrl = (struct atmarp_ctrl *) skb_put(skb,sizeof(struct atmarp_ctrl)); ctrl->type = type; ctrl->itf_num = itf; ctrl->ip = ip; - atm_force_charge(atmarpd,skb->truesize); + atm_force_charge(atmarpd, skb->truesize); sk = sk_atm(atmarpd); skb_queue_tail(&sk->sk_receive_queue, skb); @@ -79,26 +78,24 @@ static int to_atmarpd(enum atmarp_ctrl_type type,int itf,unsigned long ip) return 0; } - -static void link_vcc(struct clip_vcc *clip_vcc,struct atmarp_entry *entry) +static void link_vcc(struct clip_vcc *clip_vcc, struct atmarp_entry *entry) { - DPRINTK("link_vcc %p to entry %p (neigh %p)\n",clip_vcc,entry, - entry->neigh); + DPRINTK("link_vcc %p to entry %p (neigh %p)\n", clip_vcc, entry, + entry->neigh); clip_vcc->entry = entry; - clip_vcc->xoff = 0; /* @@@ may overrun buffer by one packet */ + clip_vcc->xoff = 0; /* @@@ may overrun buffer by one packet */ clip_vcc->next = entry->vccs; entry->vccs = clip_vcc; entry->neigh->used = jiffies; } - static void unlink_clip_vcc(struct clip_vcc *clip_vcc) { struct atmarp_entry *entry = clip_vcc->entry; struct clip_vcc **walk; if (!entry) { - printk(KERN_CRIT "!clip_vcc->entry (clip_vcc %p)\n",clip_vcc); + printk(KERN_CRIT "!clip_vcc->entry (clip_vcc %p)\n", clip_vcc); return; } spin_lock_bh(&entry->neigh->dev->xmit_lock); /* block clip_start_xmit() */ @@ -107,24 +104,24 @@ static void unlink_clip_vcc(struct clip_vcc *clip_vcc) if (*walk == clip_vcc) { int error; - *walk = clip_vcc->next; /* atomic */ + *walk = clip_vcc->next; /* atomic */ clip_vcc->entry = NULL; if (clip_vcc->xoff) netif_wake_queue(entry->neigh->dev); if (entry->vccs) goto out; - entry->expires = jiffies-1; - /* force resolution or expiration */ + entry->expires = jiffies - 1; + /* force resolution or expiration */ error = neigh_update(entry->neigh, NULL, NUD_NONE, NEIGH_UPDATE_F_ADMIN); if (error) printk(KERN_CRIT "unlink_clip_vcc: " - "neigh_update failed with %d\n",error); + "neigh_update failed with %d\n", error); goto out; } printk(KERN_CRIT "ATMARP: unlink_clip_vcc failed (entry %p, vcc " - "0x%p)\n",entry,clip_vcc); -out: + "0x%p)\n", entry, clip_vcc); + out: spin_unlock_bh(&entry->neigh->dev->xmit_lock); } @@ -153,13 +150,13 @@ static int neigh_check_cb(struct neighbour *n) DPRINTK("destruction postponed with ref %d\n", atomic_read(&n->refcnt)); - while ((skb = skb_dequeue(&n->arp_queue)) != NULL) + while ((skb = skb_dequeue(&n->arp_queue)) != NULL) dev_kfree_skb(skb); return 0; } - DPRINTK("expired neigh %p\n",n); + DPRINTK("expired neigh %p\n", n); return 1; } @@ -167,7 +164,7 @@ static void idle_timer_check(unsigned long dummy) { write_lock(&clip_tbl.lock); __neigh_for_each_release(&clip_tbl, neigh_check_cb); - mod_timer(&idle_timer, jiffies+CLIP_CHECK_INTERVAL*HZ); + mod_timer(&idle_timer, jiffies + CLIP_CHECK_INTERVAL * HZ); write_unlock(&clip_tbl.lock); } @@ -177,13 +174,13 @@ static int clip_arp_rcv(struct sk_buff *skb) DPRINTK("clip_arp_rcv\n"); vcc = ATM_SKB(skb)->vcc; - if (!vcc || !atm_charge(vcc,skb->truesize)) { + if (!vcc || !atm_charge(vcc, skb->truesize)) { dev_kfree_skb_any(skb); return 0; } - DPRINTK("pushing to %p\n",vcc); - DPRINTK("using %p\n",CLIP_VCC(vcc)->old_push); - CLIP_VCC(vcc)->old_push(vcc,skb); + DPRINTK("pushing to %p\n", vcc); + DPRINTK("using %p\n", CLIP_VCC(vcc)->old_push); + CLIP_VCC(vcc)->old_push(vcc, skb); return 0; } @@ -193,34 +190,38 @@ static const unsigned char llc_oui[] = { 0x03, /* Ctrl: Unnumbered Information Command PDU */ 0x00, /* OUI: EtherType */ 0x00, - 0x00 }; + 0x00 +}; -static void clip_push(struct atm_vcc *vcc,struct sk_buff *skb) +static void clip_push(struct atm_vcc *vcc, struct sk_buff *skb) { struct clip_vcc *clip_vcc = CLIP_VCC(vcc); DPRINTK("clip push\n"); if (!skb) { - DPRINTK("removing VCC %p\n",clip_vcc); - if (clip_vcc->entry) unlink_clip_vcc(clip_vcc); - clip_vcc->old_push(vcc,NULL); /* pass on the bad news */ + DPRINTK("removing VCC %p\n", clip_vcc); + if (clip_vcc->entry) + unlink_clip_vcc(clip_vcc); + clip_vcc->old_push(vcc, NULL); /* pass on the bad news */ kfree(clip_vcc); return; } - atm_return(vcc,skb->truesize); + atm_return(vcc, skb->truesize); skb->dev = clip_vcc->entry ? clip_vcc->entry->neigh->dev : clip_devs; - /* clip_vcc->entry == NULL if we don't have an IP address yet */ + /* clip_vcc->entry == NULL if we don't have an IP address yet */ if (!skb->dev) { dev_kfree_skb_any(skb); return; } ATM_SKB(skb)->vcc = vcc; skb->mac.raw = skb->data; - if (!clip_vcc->encap || skb->len < RFC1483LLC_LEN || memcmp(skb->data, - llc_oui,sizeof(llc_oui))) skb->protocol = htons(ETH_P_IP); + if (!clip_vcc->encap + || skb->len < RFC1483LLC_LEN + || memcmp(skb->data, llc_oui, sizeof (llc_oui))) + skb->protocol = htons(ETH_P_IP); else { skb->protocol = ((u16 *) skb->data)[3]; - skb_pull(skb,RFC1483LLC_LEN); + skb_pull(skb, RFC1483LLC_LEN); if (skb->protocol == htons(ETH_P_ARP)) { PRIV(skb->dev)->stats.rx_packets++; PRIV(skb->dev)->stats.rx_bytes += skb->len; @@ -235,58 +236,54 @@ static void clip_push(struct atm_vcc *vcc,struct sk_buff *skb) netif_rx(skb); } - /* * Note: these spinlocks _must_not_ block on non-SMP. The only goal is that * clip_pop is atomic with respect to the critical section in clip_start_xmit. */ - -static void clip_pop(struct atm_vcc *vcc,struct sk_buff *skb) +static void clip_pop(struct atm_vcc *vcc, struct sk_buff *skb) { struct clip_vcc *clip_vcc = CLIP_VCC(vcc); struct net_device *dev = skb->dev; int old; unsigned long flags; - DPRINTK("clip_pop(vcc %p)\n",vcc); - clip_vcc->old_pop(vcc,skb); + DPRINTK("clip_pop(vcc %p)\n", vcc); + clip_vcc->old_pop(vcc, skb); /* skb->dev == NULL in outbound ARP packets */ - if (!dev) return; - spin_lock_irqsave(&PRIV(dev)->xoff_lock,flags); - if (atm_may_send(vcc,0)) { - old = xchg(&clip_vcc->xoff,0); - if (old) netif_wake_queue(dev); + if (!dev) + return; + spin_lock_irqsave(&PRIV(dev)->xoff_lock, flags); + if (atm_may_send(vcc, 0)) { + old = xchg(&clip_vcc->xoff, 0); + if (old) + netif_wake_queue(dev); } - spin_unlock_irqrestore(&PRIV(dev)->xoff_lock,flags); + spin_unlock_irqrestore(&PRIV(dev)->xoff_lock, flags); } - static void clip_neigh_destroy(struct neighbour *neigh) { - DPRINTK("clip_neigh_destroy (neigh %p)\n",neigh); + DPRINTK("clip_neigh_destroy (neigh %p)\n", neigh); if (NEIGH2ENTRY(neigh)->vccs) printk(KERN_CRIT "clip_neigh_destroy: vccs != NULL !!!\n"); NEIGH2ENTRY(neigh)->vccs = (void *) 0xdeadbeef; } - -static void clip_neigh_solicit(struct neighbour *neigh,struct sk_buff *skb) +static void clip_neigh_solicit(struct neighbour *neigh, struct sk_buff *skb) { - DPRINTK("clip_neigh_solicit (neigh %p, skb %p)\n",neigh,skb); - to_atmarpd(act_need,PRIV(neigh->dev)->number,NEIGH2ENTRY(neigh)->ip); + DPRINTK("clip_neigh_solicit (neigh %p, skb %p)\n", neigh, skb); + to_atmarpd(act_need, PRIV(neigh->dev)->number, NEIGH2ENTRY(neigh)->ip); } - -static void clip_neigh_error(struct neighbour *neigh,struct sk_buff *skb) +static void clip_neigh_error(struct neighbour *neigh, struct sk_buff *skb) { #ifndef CONFIG_ATM_CLIP_NO_ICMP - icmp_send(skb,ICMP_DEST_UNREACH,ICMP_HOST_UNREACH,0); + icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0); #endif kfree_skb(skb); } - static struct neigh_ops clip_neigh_ops = { .family = AF_INET, .solicit = clip_neigh_solicit, @@ -297,7 +294,6 @@ static struct neigh_ops clip_neigh_ops = { .queue_xmit = dev_queue_xmit, }; - static int clip_constructor(struct neighbour *neigh) { struct atmarp_entry *entry = NEIGH2ENTRY(neigh); @@ -305,9 +301,10 @@ static int clip_constructor(struct neighbour *neigh) struct in_device *in_dev; struct neigh_parms *parms; - DPRINTK("clip_constructor (neigh %p, entry %p)\n",neigh,entry); + DPRINTK("clip_constructor (neigh %p, entry %p)\n", neigh, entry); neigh->type = inet_addr_type(entry->ip); - if (neigh->type != RTN_UNICAST) return -EINVAL; + if (neigh->type != RTN_UNICAST) + return -EINVAL; rcu_read_lock(); in_dev = __in_dev_get_rcu(dev); @@ -326,13 +323,13 @@ static int clip_constructor(struct neighbour *neigh) neigh->ops->connected_output : neigh->ops->output; entry->neigh = neigh; entry->vccs = NULL; - entry->expires = jiffies-1; + entry->expires = jiffies - 1; return 0; } static u32 clip_hash(const void *pkey, const struct net_device *dev) { - return jhash_2words(*(u32 *)pkey, dev->ifindex, clip_tbl.hash_rnd); + return jhash_2words(*(u32 *) pkey, dev->ifindex, clip_tbl.hash_rnd); } static struct neigh_table clip_tbl = { @@ -366,7 +363,6 @@ static struct neigh_table clip_tbl = { .gc_thresh3 = 1024, }; - /* @@@ copy bh locking from arp.c -- need to bh-enable atm code before */ /* @@ -376,15 +372,13 @@ static struct neigh_table clip_tbl = { * clip_setentry. */ - -static int clip_encap(struct atm_vcc *vcc,int mode) +static int clip_encap(struct atm_vcc *vcc, int mode) { CLIP_VCC(vcc)->encap = mode; return 0; } - -static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev) +static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct clip_priv *clip_priv = PRIV(dev); struct atmarp_entry *entry; @@ -392,7 +386,7 @@ static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev) int old; unsigned long flags; - DPRINTK("clip_start_xmit (skb %p)\n",skb); + DPRINTK("clip_start_xmit (skb %p)\n", skb); if (!skb->dst) { printk(KERN_ERR "clip_start_xmit: skb->dst == NULL\n"); dev_kfree_skb(skb); @@ -401,9 +395,9 @@ static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev) } if (!skb->dst->neighbour) { #if 0 - skb->dst->neighbour = clip_find_neighbour(skb->dst,1); + skb->dst->neighbour = clip_find_neighbour(skb->dst, 1); if (!skb->dst->neighbour) { - dev_kfree_skb(skb); /* lost that one */ + dev_kfree_skb(skb); /* lost that one */ clip_priv->stats.tx_dropped++; return 0; } @@ -417,73 +411,73 @@ static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev) if (!entry->vccs) { if (time_after(jiffies, entry->expires)) { /* should be resolved */ - entry->expires = jiffies+ATMARP_RETRY_DELAY*HZ; - to_atmarpd(act_need,PRIV(dev)->number,entry->ip); + entry->expires = jiffies + ATMARP_RETRY_DELAY * HZ; + to_atmarpd(act_need, PRIV(dev)->number, entry->ip); } if (entry->neigh->arp_queue.qlen < ATMARP_MAX_UNRES_PACKETS) - skb_queue_tail(&entry->neigh->arp_queue,skb); + skb_queue_tail(&entry->neigh->arp_queue, skb); else { dev_kfree_skb(skb); clip_priv->stats.tx_dropped++; } return 0; } - DPRINTK("neigh %p, vccs %p\n",entry,entry->vccs); + DPRINTK("neigh %p, vccs %p\n", entry, entry->vccs); ATM_SKB(skb)->vcc = vcc = entry->vccs->vcc; - DPRINTK("using neighbour %p, vcc %p\n",skb->dst->neighbour,vcc); + DPRINTK("using neighbour %p, vcc %p\n", skb->dst->neighbour, vcc); if (entry->vccs->encap) { void *here; - here = skb_push(skb,RFC1483LLC_LEN); - memcpy(here,llc_oui,sizeof(llc_oui)); + here = skb_push(skb, RFC1483LLC_LEN); + memcpy(here, llc_oui, sizeof(llc_oui)); ((u16 *) here)[3] = skb->protocol; } atomic_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); ATM_SKB(skb)->atm_options = vcc->atm_options; entry->vccs->last_use = jiffies; - DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n",skb,vcc,vcc->dev); - old = xchg(&entry->vccs->xoff,1); /* assume XOFF ... */ + DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, vcc, vcc->dev); + old = xchg(&entry->vccs->xoff, 1); /* assume XOFF ... */ if (old) { printk(KERN_WARNING "clip_start_xmit: XOFF->XOFF transition\n"); return 0; } clip_priv->stats.tx_packets++; clip_priv->stats.tx_bytes += skb->len; - (void) vcc->send(vcc,skb); - if (atm_may_send(vcc,0)) { + vcc->send(vcc, skb); + if (atm_may_send(vcc, 0)) { entry->vccs->xoff = 0; return 0; } - spin_lock_irqsave(&clip_priv->xoff_lock,flags); - netif_stop_queue(dev); /* XOFF -> throttle immediately */ + spin_lock_irqsave(&clip_priv->xoff_lock, flags); + netif_stop_queue(dev); /* XOFF -> throttle immediately */ barrier(); if (!entry->vccs->xoff) netif_start_queue(dev); - /* Oh, we just raced with clip_pop. netif_start_queue should be - good enough, because nothing should really be asleep because - of the brief netif_stop_queue. If this isn't true or if it - changes, use netif_wake_queue instead. */ - spin_unlock_irqrestore(&clip_priv->xoff_lock,flags); + /* Oh, we just raced with clip_pop. netif_start_queue should be + good enough, because nothing should really be asleep because + of the brief netif_stop_queue. If this isn't true or if it + changes, use netif_wake_queue instead. */ + spin_unlock_irqrestore(&clip_priv->xoff_lock, flags); return 0; } - static struct net_device_stats *clip_get_stats(struct net_device *dev) { return &PRIV(dev)->stats; } - -static int clip_mkip(struct atm_vcc *vcc,int timeout) +static int clip_mkip(struct atm_vcc *vcc, int timeout) { struct clip_vcc *clip_vcc; struct sk_buff_head copy; struct sk_buff *skb; - if (!vcc->push) return -EBADFD; - clip_vcc = kmalloc(sizeof(struct clip_vcc),GFP_KERNEL); - if (!clip_vcc) return -ENOMEM; - DPRINTK("mkip clip_vcc %p vcc %p\n",clip_vcc,vcc); + if (!vcc->push) + return -EBADFD; + clip_vcc = kmalloc(sizeof(struct clip_vcc), GFP_KERNEL); + if (!clip_vcc) + return -ENOMEM; + DPRINTK("mkip clip_vcc %p vcc %p\n", clip_vcc, vcc); clip_vcc->vcc = vcc; vcc->user_back = clip_vcc; set_bit(ATM_VF_IS_CLIP, &vcc->flags); @@ -491,7 +485,7 @@ static int clip_mkip(struct atm_vcc *vcc,int timeout) clip_vcc->xoff = 0; clip_vcc->encap = 1; clip_vcc->last_use = jiffies; - clip_vcc->idle_timeout = timeout*HZ; + clip_vcc->idle_timeout = timeout * HZ; clip_vcc->old_push = vcc->push; clip_vcc->old_pop = vcc->pop; vcc->push = clip_push; @@ -501,27 +495,25 @@ static int clip_mkip(struct atm_vcc *vcc,int timeout) /* re-process everything received between connection setup and MKIP */ while ((skb = skb_dequeue(©)) != NULL) if (!clip_devs) { - atm_return(vcc,skb->truesize); + atm_return(vcc, skb->truesize); kfree_skb(skb); - } - else { + } else { unsigned int len = skb->len; - clip_push(vcc,skb); + clip_push(vcc, skb); PRIV(skb->dev)->stats.rx_packets--; PRIV(skb->dev)->stats.rx_bytes -= len; } return 0; } - -static int clip_setentry(struct atm_vcc *vcc,u32 ip) +static int clip_setentry(struct atm_vcc *vcc, u32 ip) { struct neighbour *neigh; struct atmarp_entry *entry; int error; struct clip_vcc *clip_vcc; - struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip, .tos = 1 } } }; + struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip, .tos = 1}} }; struct rtable *rt; if (vcc->push != clip_push) { @@ -538,28 +530,29 @@ static int clip_setentry(struct atm_vcc *vcc,u32 ip) unlink_clip_vcc(clip_vcc); return 0; } - error = ip_route_output_key(&rt,&fl); - if (error) return error; - neigh = __neigh_lookup(&clip_tbl,&ip,rt->u.dst.dev,1); + error = ip_route_output_key(&rt, &fl); + if (error) + return error; + neigh = __neigh_lookup(&clip_tbl, &ip, rt->u.dst.dev, 1); ip_rt_put(rt); if (!neigh) return -ENOMEM; entry = NEIGH2ENTRY(neigh); if (entry != clip_vcc->entry) { - if (!clip_vcc->entry) DPRINTK("setentry: add\n"); + if (!clip_vcc->entry) + DPRINTK("setentry: add\n"); else { DPRINTK("setentry: update\n"); unlink_clip_vcc(clip_vcc); } - link_vcc(clip_vcc,entry); + link_vcc(clip_vcc, entry); } - error = neigh_update(neigh, llc_oui, NUD_PERMANENT, - NEIGH_UPDATE_F_OVERRIDE|NEIGH_UPDATE_F_ADMIN); + error = neigh_update(neigh, llc_oui, NUD_PERMANENT, + NEIGH_UPDATE_F_OVERRIDE | NEIGH_UPDATE_F_ADMIN); neigh_release(neigh); return error; } - static void clip_setup(struct net_device *dev) { dev->hard_start_xmit = clip_start_xmit; @@ -568,15 +561,14 @@ static void clip_setup(struct net_device *dev) dev->type = ARPHRD_ATM; dev->hard_header_len = RFC1483LLC_LEN; dev->mtu = RFC1626_MTU; - dev->tx_queue_len = 100; /* "normal" queue (packets) */ - /* When using a "real" qdisc, the qdisc determines the queue */ - /* length. tx_queue_len is only used for the default case, */ - /* without any more elaborate queuing. 100 is a reasonable */ - /* compromise between decent burst-tolerance and protection */ - /* against memory hogs. */ + dev->tx_queue_len = 100; /* "normal" queue (packets) */ + /* When using a "real" qdisc, the qdisc determines the queue */ + /* length. tx_queue_len is only used for the default case, */ + /* without any more elaborate queuing. 100 is a reasonable */ + /* compromise between decent burst-tolerance and protection */ + /* against memory hogs. */ } - static int clip_create(int number) { struct net_device *dev; @@ -585,19 +577,19 @@ static int clip_create(int number) if (number != -1) { for (dev = clip_devs; dev; dev = PRIV(dev)->next) - if (PRIV(dev)->number == number) return -EEXIST; - } - else { + if (PRIV(dev)->number == number) + return -EEXIST; + } else { number = 0; for (dev = clip_devs; dev; dev = PRIV(dev)->next) if (PRIV(dev)->number >= number) - number = PRIV(dev)->number+1; + number = PRIV(dev)->number + 1; } dev = alloc_netdev(sizeof(struct clip_priv), "", clip_setup); if (!dev) return -ENOMEM; clip_priv = PRIV(dev); - sprintf(dev->name,"atm%d",number); + sprintf(dev->name, "atm%d", number); spin_lock_init(&clip_priv->xoff_lock); clip_priv->number = number; error = register_netdev(dev); @@ -607,53 +599,48 @@ static int clip_create(int number) } clip_priv->next = clip_devs; clip_devs = dev; - DPRINTK("registered (net:%s)\n",dev->name); + DPRINTK("registered (net:%s)\n", dev->name); return number; } - -static int clip_device_event(struct notifier_block *this,unsigned long event, - void *dev) +static int clip_device_event(struct notifier_block *this, unsigned long event, + void *arg) { - /* ignore non-CLIP devices */ - if (((struct net_device *) dev)->type != ARPHRD_ATM || - ((struct net_device *) dev)->hard_start_xmit != clip_start_xmit) + struct net_device *dev = arg; + + if (event == NETDEV_UNREGISTER) { + neigh_ifdown(&clip_tbl, dev); return NOTIFY_DONE; + } + + /* ignore non-CLIP devices */ + if (dev->type != ARPHRD_ATM || dev->hard_start_xmit != clip_start_xmit) + return NOTIFY_DONE; + switch (event) { - case NETDEV_UP: - DPRINTK("clip_device_event NETDEV_UP\n"); - (void) to_atmarpd(act_up,PRIV(dev)->number,0); - break; - case NETDEV_GOING_DOWN: - DPRINTK("clip_device_event NETDEV_DOWN\n"); - (void) to_atmarpd(act_down,PRIV(dev)->number,0); - break; - case NETDEV_CHANGE: - case NETDEV_CHANGEMTU: - DPRINTK("clip_device_event NETDEV_CHANGE*\n"); - (void) to_atmarpd(act_change,PRIV(dev)->number,0); - break; - case NETDEV_REBOOT: - case NETDEV_REGISTER: - case NETDEV_DOWN: - DPRINTK("clip_device_event %ld\n",event); - /* ignore */ - break; - default: - printk(KERN_WARNING "clip_device_event: unknown event " - "%ld\n",event); - break; + case NETDEV_UP: + DPRINTK("clip_device_event NETDEV_UP\n"); + to_atmarpd(act_up, PRIV(dev)->number, 0); + break; + case NETDEV_GOING_DOWN: + DPRINTK("clip_device_event NETDEV_DOWN\n"); + to_atmarpd(act_down, PRIV(dev)->number, 0); + break; + case NETDEV_CHANGE: + case NETDEV_CHANGEMTU: + DPRINTK("clip_device_event NETDEV_CHANGE*\n"); + to_atmarpd(act_change, PRIV(dev)->number, 0); + break; } return NOTIFY_DONE; } - -static int clip_inet_event(struct notifier_block *this,unsigned long event, - void *ifa) +static int clip_inet_event(struct notifier_block *this, unsigned long event, + void *ifa) { struct in_device *in_dev; - in_dev = ((struct in_ifaddr *) ifa)->ifa_dev; + in_dev = ((struct in_ifaddr *)ifa)->ifa_dev; if (!in_dev || !in_dev->dev) { printk(KERN_WARNING "clip_inet_event: no device\n"); return NOTIFY_DONE; @@ -662,23 +649,20 @@ static int clip_inet_event(struct notifier_block *this,unsigned long event, * Transitions are of the down-change-up type, so it's sufficient to * handle the change on up. */ - if (event != NETDEV_UP) return NOTIFY_DONE; - return clip_device_event(this,NETDEV_CHANGE,in_dev->dev); + if (event != NETDEV_UP) + return NOTIFY_DONE; + return clip_device_event(this, NETDEV_CHANGE, in_dev->dev); } static struct notifier_block clip_dev_notifier = { - clip_device_event, - NULL, - 0 + .notifier_call = clip_device_event, }; static struct notifier_block clip_inet_notifier = { - clip_inet_event, - NULL, - 0 + .notifier_call = clip_inet_event, }; @@ -686,14 +670,12 @@ static struct notifier_block clip_inet_notifier = { static void atmarpd_close(struct atm_vcc *vcc) { DPRINTK("atmarpd_close\n"); - atmarpd = NULL; /* assumed to be atomic */ - barrier(); - unregister_inetaddr_notifier(&clip_inet_notifier); - unregister_netdevice_notifier(&clip_dev_notifier); - if (skb_peek(&sk_atm(vcc)->sk_receive_queue)) - printk(KERN_ERR "atmarpd_close: closing with requests " - "pending\n"); + + rtnl_lock(); + atmarpd = NULL; skb_queue_purge(&sk_atm(vcc)->sk_receive_queue); + rtnl_unlock(); + DPRINTK("(done)\n"); module_put(THIS_MODULE); } @@ -714,14 +696,14 @@ static struct atm_dev atmarpd_dev = { static int atm_init_atmarp(struct atm_vcc *vcc) { - if (atmarpd) return -EADDRINUSE; - if (start_timer) { - start_timer = 0; - init_timer(&idle_timer); - idle_timer.expires = jiffies+CLIP_CHECK_INTERVAL*HZ; - idle_timer.function = idle_timer_check; - add_timer(&idle_timer); + rtnl_lock(); + if (atmarpd) { + rtnl_unlock(); + return -EADDRINUSE; } + + mod_timer(&idle_timer, jiffies+CLIP_CHECK_INTERVAL*HZ); + atmarpd = vcc; set_bit(ATM_VF_META,&vcc->flags); set_bit(ATM_VF_READY,&vcc->flags); @@ -731,10 +713,7 @@ static int atm_init_atmarp(struct atm_vcc *vcc) vcc->push = NULL; vcc->pop = NULL; /* crash */ vcc->push_oam = NULL; /* crash */ - if (register_netdevice_notifier(&clip_dev_notifier)) - printk(KERN_ERR "register_netdevice_notifier failed\n"); - if (register_inetaddr_notifier(&clip_inet_notifier)) - printk(KERN_ERR "register_inetaddr_notifier failed\n"); + rtnl_unlock(); return 0; } @@ -744,53 +723,53 @@ static int clip_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) int err = 0; switch (cmd) { - case SIOCMKCLIP: - case ATMARPD_CTRL: - case ATMARP_MKIP: - case ATMARP_SETENTRY: - case ATMARP_ENCAP: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - break; - default: - return -ENOIOCTLCMD; + case SIOCMKCLIP: + case ATMARPD_CTRL: + case ATMARP_MKIP: + case ATMARP_SETENTRY: + case ATMARP_ENCAP: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + break; + default: + return -ENOIOCTLCMD; } switch (cmd) { - case SIOCMKCLIP: - err = clip_create(arg); - break; - case ATMARPD_CTRL: - err = atm_init_atmarp(vcc); - if (!err) { - sock->state = SS_CONNECTED; - __module_get(THIS_MODULE); - } - break; - case ATMARP_MKIP: - err = clip_mkip(vcc ,arg); - break; - case ATMARP_SETENTRY: - err = clip_setentry(vcc, arg); - break; - case ATMARP_ENCAP: - err = clip_encap(vcc, arg); - break; + case SIOCMKCLIP: + err = clip_create(arg); + break; + case ATMARPD_CTRL: + err = atm_init_atmarp(vcc); + if (!err) { + sock->state = SS_CONNECTED; + __module_get(THIS_MODULE); + } + break; + case ATMARP_MKIP: + err = clip_mkip(vcc, arg); + break; + case ATMARP_SETENTRY: + err = clip_setentry(vcc, arg); + break; + case ATMARP_ENCAP: + err = clip_encap(vcc, arg); + break; } return err; } static struct atm_ioctl clip_ioctl_ops = { - .owner = THIS_MODULE, - .ioctl = clip_ioctl, + .owner = THIS_MODULE, + .ioctl = clip_ioctl, }; #ifdef CONFIG_PROC_FS static void svc_addr(struct seq_file *seq, struct sockaddr_atmsvc *addr) { - static int code[] = { 1,2,10,6,1,0 }; - static int e164[] = { 1,8,4,6,1,0 }; + static int code[] = { 1, 2, 10, 6, 1, 0 }; + static int e164[] = { 1, 8, 4, 6, 1, 0 }; if (*addr->sas_addr.pub) { seq_printf(seq, "%s", addr->sas_addr.pub); @@ -809,7 +788,7 @@ static void svc_addr(struct seq_file *seq, struct sockaddr_atmsvc *addr) for (i = 0; fields[i]; i++) { for (j = fields[i]; j; j--) seq_printf(seq, "%02X", *prv++); - if (fields[i+1]) + if (fields[i + 1]) seq_putc(seq, '.'); } } @@ -828,8 +807,7 @@ static void atmarp_info(struct seq_file *seq, struct net_device *dev, svc = ((clip_vcc == SEQ_NO_VCC_TOKEN) || (sk_atm(clip_vcc->vcc)->sk_family == AF_ATMSVC)); - llc = ((clip_vcc == SEQ_NO_VCC_TOKEN) || - clip_vcc->encap); + llc = ((clip_vcc == SEQ_NO_VCC_TOKEN) || clip_vcc->encap); if (clip_vcc == SEQ_NO_VCC_TOKEN) exp = entry->neigh->used; @@ -839,10 +817,7 @@ static void atmarp_info(struct seq_file *seq, struct net_device *dev, exp = (jiffies - exp) / HZ; seq_printf(seq, "%-6s%-4s%-4s%5ld ", - dev->name, - svc ? "SVC" : "PVC", - llc ? "LLC" : "NULL", - exp); + dev->name, svc ? "SVC" : "PVC", llc ? "LLC" : "NULL", exp); off = scnprintf(buf, sizeof(buf) - 1, "%d.%d.%d.%d", NIPQUAD(entry->ip)); @@ -860,8 +835,7 @@ static void atmarp_info(struct seq_file *seq, struct net_device *dev, } else if (!svc) { seq_printf(seq, "%d.%d.%d\n", clip_vcc->vcc->dev->number, - clip_vcc->vcc->vpi, - clip_vcc->vcc->vci); + clip_vcc->vcc->vpi, clip_vcc->vcc->vci); } else { svc_addr(seq, &clip_vcc->vcc->remote); seq_putc(seq, '\n'); @@ -894,7 +868,7 @@ static struct clip_vcc *clip_seq_next_vcc(struct atmarp_entry *e, } static void *clip_seq_vcc_walk(struct clip_seq_state *state, - struct atmarp_entry *e, loff_t *pos) + struct atmarp_entry *e, loff_t * pos) { struct clip_vcc *vcc = state->vcc; @@ -911,24 +885,24 @@ static void *clip_seq_vcc_walk(struct clip_seq_state *state, return vcc; } - + static void *clip_seq_sub_iter(struct neigh_seq_state *_state, - struct neighbour *n, loff_t *pos) + struct neighbour *n, loff_t * pos) { - struct clip_seq_state *state = (struct clip_seq_state *) _state; + struct clip_seq_state *state = (struct clip_seq_state *)_state; return clip_seq_vcc_walk(state, NEIGH2ENTRY(n), pos); } -static void *clip_seq_start(struct seq_file *seq, loff_t *pos) +static void *clip_seq_start(struct seq_file *seq, loff_t * pos) { return neigh_seq_start(seq, pos, &clip_tbl, NEIGH_SEQ_NEIGH_ONLY); } static int clip_seq_show(struct seq_file *seq, void *v) { - static char atm_arp_banner[] = - "IPitf TypeEncp Idle IP address ATM address\n"; + static char atm_arp_banner[] = + "IPitf TypeEncp Idle IP address ATM address\n"; if (v == SEQ_START_TOKEN) { seq_puts(seq, atm_arp_banner); @@ -939,7 +913,7 @@ static int clip_seq_show(struct seq_file *seq, void *v) atmarp_info(seq, n->dev, NEIGH2ENTRY(n), vcc); } - return 0; + return 0; } static struct seq_operations arp_seq_ops = { @@ -988,20 +962,19 @@ static struct file_operations arp_seq_fops = { static int __init atm_clip_init(void) { + struct proc_dir_entry *p; neigh_table_init(&clip_tbl); clip_tbl_hook = &clip_tbl; register_atm_ioctl(&clip_ioctl_ops); + register_netdevice_notifier(&clip_dev_notifier); + register_inetaddr_notifier(&clip_inet_notifier); -#ifdef CONFIG_PROC_FS -{ - struct proc_dir_entry *p; + setup_timer(&idle_timer, idle_timer_check, 0); p = create_proc_entry("arp", S_IRUGO, atm_proc_root); if (p) p->proc_fops = &arp_seq_fops; -} -#endif return 0; } @@ -1012,13 +985,15 @@ static void __exit atm_clip_exit(void) remove_proc_entry("arp", atm_proc_root); + unregister_inetaddr_notifier(&clip_inet_notifier); + unregister_netdevice_notifier(&clip_dev_notifier); + deregister_atm_ioctl(&clip_ioctl_ops); /* First, stop the idle timer, so it stops banging * on the table. */ - if (start_timer == 0) - del_timer(&idle_timer); + del_timer_sync(&idle_timer); /* Next, purge the table, so that the device * unregister loop below does not hang due to @@ -1042,5 +1017,6 @@ static void __exit atm_clip_exit(void) module_init(atm_clip_init); module_exit(atm_clip_exit); - +MODULE_AUTHOR("Werner Almesberger"); +MODULE_DESCRIPTION("Classical/IP over ATM interface"); MODULE_LICENSE("GPL"); diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index 041dadde31af..4749d504c629 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -928,7 +928,8 @@ static void parp_redo(struct sk_buff *skb) * Receive an arp request from the device layer. */ -int arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev) +static int arp_rcv(struct sk_buff *skb, struct net_device *dev, + struct packet_type *pt, struct net_device *orig_dev) { struct arphdr *arp; @@ -1417,7 +1418,6 @@ static int __init arp_proc_init(void) EXPORT_SYMBOL(arp_broken_ops); EXPORT_SYMBOL(arp_find); -EXPORT_SYMBOL(arp_rcv); EXPORT_SYMBOL(arp_create); EXPORT_SYMBOL(arp_xmit); EXPORT_SYMBOL(arp_send); diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 81c2f7885292..54419b27686f 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1556,7 +1556,6 @@ void __init devinet_init(void) #endif } -EXPORT_SYMBOL(devinet_ioctl); EXPORT_SYMBOL(in_dev_finish_destroy); EXPORT_SYMBOL(inet_select_addr); EXPORT_SYMBOL(inetdev_by_index); diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 4e3d3811dea2..cdde96390960 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -666,4 +666,3 @@ void __init ip_fib_init(void) } EXPORT_SYMBOL(inet_addr_type); -EXPORT_SYMBOL(ip_rt_ioctl); diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index ef7366fc132f..ee9b5515b9ae 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -43,8 +43,6 @@ struct inet_bind_bucket *inet_bind_bucket_create(kmem_cache_t *cachep, return tb; } -EXPORT_SYMBOL(inet_bind_bucket_create); - /* * Caller must hold hashbucket lock for this tb with local BH disabled */ @@ -64,8 +62,6 @@ void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb, inet_csk(sk)->icsk_bind_hash = tb; } -EXPORT_SYMBOL(inet_bind_hash); - /* * Get rid of any references to a local port held by the given sock. */ diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 8dcba3887f04..cff9c3a72daf 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -904,7 +904,7 @@ alloc_new_skb: * because we have no idea what fragment will be * the last. */ - if (datalen == length) + if (datalen == length + fraggap) alloclen += rt->u.dst.trailer_len; if (transhdrlen) { diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 195d83584558..9f0cca4c4fae 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4559,7 +4559,6 @@ discard: EXPORT_SYMBOL(sysctl_tcp_ecn); EXPORT_SYMBOL(sysctl_tcp_reordering); -EXPORT_SYMBOL(sysctl_tcp_abc); EXPORT_SYMBOL(tcp_parse_options); EXPORT_SYMBOL(tcp_rcv_established); EXPORT_SYMBOL(tcp_rcv_state_process); diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 9e85c0416109..672950e54c49 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1859,5 +1859,4 @@ EXPORT_SYMBOL(tcp_proc_unregister); #endif EXPORT_SYMBOL(sysctl_local_port_range); EXPORT_SYMBOL(sysctl_tcp_low_latency); -EXPORT_SYMBOL(sysctl_tcp_tw_reuse); diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 9d79546d384e..b871db6adc55 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -59,9 +59,6 @@ int sysctl_tcp_tso_win_divisor = 3; int sysctl_tcp_mtu_probing = 0; int sysctl_tcp_base_mss = 512; -EXPORT_SYMBOL(sysctl_tcp_mtu_probing); -EXPORT_SYMBOL(sysctl_tcp_base_mss); - static void update_send_head(struct sock *sk, struct tcp_sock *tp, struct sk_buff *skb) { diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index a8e14dc1b04e..3dc3e1f3b7aa 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -805,16 +805,22 @@ void xfrm_replay_notify(struct xfrm_state *x, int event) case XFRM_REPLAY_UPDATE: if (x->replay_maxdiff && (x->replay.seq - x->preplay.seq < x->replay_maxdiff) && - (x->replay.oseq - x->preplay.oseq < x->replay_maxdiff)) - return; + (x->replay.oseq - x->preplay.oseq < x->replay_maxdiff)) { + if (x->xflags & XFRM_TIME_DEFER) + event = XFRM_REPLAY_TIMEOUT; + else + return; + } break; case XFRM_REPLAY_TIMEOUT: if ((x->replay.seq == x->preplay.seq) && (x->replay.bitmap == x->preplay.bitmap) && - (x->replay.oseq == x->preplay.oseq)) + (x->replay.oseq == x->preplay.oseq)) { + x->xflags |= XFRM_TIME_DEFER; return; + } break; } @@ -825,8 +831,10 @@ void xfrm_replay_notify(struct xfrm_state *x, int event) km_state_notify(x, &c); if (x->replay_maxage && - !mod_timer(&x->rtimer, jiffies + x->replay_maxage)) + !mod_timer(&x->rtimer, jiffies + x->replay_maxage)) { xfrm_state_hold(x); + x->xflags &= ~XFRM_TIME_DEFER; + } } EXPORT_SYMBOL(xfrm_replay_notify); @@ -836,10 +844,15 @@ static void xfrm_replay_timer_handler(unsigned long data) spin_lock(&x->lock); - if (xfrm_aevent_is_on() && x->km.state == XFRM_STATE_VALID) - xfrm_replay_notify(x, XFRM_REPLAY_TIMEOUT); + if (x->km.state == XFRM_STATE_VALID) { + if (xfrm_aevent_is_on()) + xfrm_replay_notify(x, XFRM_REPLAY_TIMEOUT); + else + x->xflags |= XFRM_TIME_DEFER; + } spin_unlock(&x->lock); + xfrm_state_put(x); } int xfrm_replay_check(struct xfrm_state *x, u32 seq)