ARM: debug-ll: reorder Kconfig alphanumerically

The file has gotten a little out of sync, as platforms got
added in the wrong place, or have been renamed. This moves
the options around, but should not change any functionality.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2015-12-03 18:16:45 +01:00
parent 0045c0dd2f
commit 1dc93416ea
1 changed files with 141 additions and 141 deletions

View File

@ -232,23 +232,6 @@ choice
Say Y here if you want the debug print routines to direct Say Y here if you want the debug print routines to direct
their output to UART0 serial port on DaVinci DMx devices. their output to UART0 serial port on DaVinci DMx devices.
config DEBUG_ZYNQ_UART0
bool "Kernel low-level debugging on Xilinx Zynq using UART0"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
their output to UART0 on the Zynq platform.
config DEBUG_ZYNQ_UART1
bool "Kernel low-level debugging on Xilinx Zynq using UART1"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
their output to UART1 on the Zynq platform.
If you have a ZC702 board and want early boot messages to
appear on the USB serial adaptor, select this option.
config DEBUG_DC21285_PORT config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port" bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE depends on FOOTBRIDGE
@ -263,6 +246,20 @@ choice
Say Y here if you want the debug print routines to direct Say Y here if you want the debug print routines to direct
their output to the UA0 serial port in the CX92755. their output to the UA0 serial port in the CX92755.
config DEBUG_LL_UART_EFM32
bool "Kernel low-level debugging via efm32 UART"
depends on ARCH_EFM32
help
Say Y here if you want the debug print routines to direct
their output to an UART or USART port on efm32 based
machines. Use the following addresses for DEBUG_UART_PHYS:
0x4000c000 | USART0
0x4000c400 | USART1
0x4000c800 | USART2
0x4000e000 | UART0
0x4000e400 | UART1
config DEBUG_EP93XX config DEBUG_EP93XX
bool "Kernel low-level debugging messages via ep93xx UART" bool "Kernel low-level debugging messages via ep93xx UART"
depends on ARCH_EP93XX depends on ARCH_EP93XX
@ -512,23 +509,6 @@ choice
Say Y here if you want kernel low-level debugging support Say Y here if you want kernel low-level debugging support
on MMP UART3. on MMP UART3.
config DEBUG_QCOM_UARTDM
bool "Kernel low-level debugging messages via QCOM UARTDM"
depends on ARCH_QCOM
help
Say Y here if you want the debug print routines to direct
their output to the serial port on Qualcomm devices.
ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT
APQ8064 0x16640000 0xf0040000
APQ8084 0xf995e000 0xfa75e000
MSM8X60 0x19c40000 0xf0040000
MSM8960 0x16440000 0xf0040000
MSM8974 0xf991e000 0xfa71e000
Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
options based on your needs.
config DEBUG_MVEBU_UART0 config DEBUG_MVEBU_UART0
bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)" bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
depends on ARCH_MVEBU depends on ARCH_MVEBU
@ -588,12 +568,29 @@ choice
when u-boot hands over to the kernel, the system when u-boot hands over to the kernel, the system
silently crashes, with no serial output at all. silently crashes, with no serial output at all.
config DEBUG_VF_UART config DEBUG_MT6589_UART0
bool "Vybrid UART" bool "Mediatek mt6589 UART0"
depends on SOC_VF610 depends on ARCH_MEDIATEK
select DEBUG_UART_8250
help help
Say Y here if you want kernel low-level debugging support Say Y here if you want kernel low-level debugging support
on Vybrid based platforms. for Mediatek mt6589 based platforms on UART0.
config DEBUG_MT8127_UART0
bool "Mediatek mt8127/mt6592 UART0"
depends on ARCH_MEDIATEK
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
for Mediatek mt8127 based platforms on UART0.
config DEBUG_MT8135_UART3
bool "Mediatek mt8135 UART3"
depends on ARCH_MEDIATEK
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
for Mediatek mt8135 based platforms on UART3.
config DEBUG_NETX_UART config DEBUG_NETX_UART
bool "Kernel low-level debugging messages via NetX UART" bool "Kernel low-level debugging messages via NetX UART"
@ -757,6 +754,23 @@ choice
Say Y here if you want kernel low-level debugging support Say Y here if you want kernel low-level debugging support
on PXA UART1. on PXA UART1.
config DEBUG_QCOM_UARTDM
bool "Kernel low-level debugging messages via QCOM UARTDM"
depends on ARCH_QCOM
help
Say Y here if you want the debug print routines to direct
their output to the serial port on Qualcomm devices.
ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT
APQ8064 0x16640000 0xf0040000
APQ8084 0xf995e000 0xfa75e000
MSM8X60 0x19c40000 0xf0040000
MSM8960 0x16440000 0xf0040000
MSM8974 0xf991e000 0xfa71e000
Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
options based on your needs.
config DEBUG_REALVIEW_STD_PORT config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART" bool "RealView Default UART"
depends on ARCH_REALVIEW depends on ARCH_REALVIEW
@ -1023,58 +1037,6 @@ choice
Say Y here if you want kernel low-level debugging support Say Y here if you want kernel low-level debugging support
on Allwinner A31/A23 based platforms on the R_UART. on Allwinner A31/A23 based platforms on the R_UART.
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Automatically determines which UART to use for low-level
debug based on the ODMDATA value. This value is part of
the BCT, and is written to the boot memory device using
nvflash, or other flashing tool. When bits 19:18 are 3,
then bits 17:15 indicate which UART to use; 0/1/2/3/4
are UART A/B/C/D/E.
config TEGRA_DEBUG_UARTA
bool "Kernel low-level debugging messages via Tegra UART A"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config TEGRA_DEBUG_UARTB
bool "Kernel low-level debugging messages via Tegra UART B"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config TEGRA_DEBUG_UARTC
bool "Kernel low-level debugging messages via Tegra UART C"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config TEGRA_DEBUG_UARTD
bool "Kernel low-level debugging messages via Tegra UART D"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config TEGRA_DEBUG_UARTE
bool "Kernel low-level debugging messages via Tegra UART E"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config DEBUG_SIRFPRIMA2_UART1 config DEBUG_SIRFPRIMA2_UART1
bool "Kernel low-level debugging messages via SiRFprimaII UART1" bool "Kernel low-level debugging messages via SiRFprimaII UART1"
depends on ARCH_PRIMA2 depends on ARCH_PRIMA2
@ -1139,6 +1101,58 @@ choice
If unsure, say N. If unsure, say N.
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Automatically determines which UART to use for low-level
debug based on the ODMDATA value. This value is part of
the BCT, and is written to the boot memory device using
nvflash, or other flashing tool. When bits 19:18 are 3,
then bits 17:15 indicate which UART to use; 0/1/2/3/4
are UART A/B/C/D/E.
config TEGRA_DEBUG_UARTA
bool "Kernel low-level debugging messages via Tegra UART A"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config TEGRA_DEBUG_UARTB
bool "Kernel low-level debugging messages via Tegra UART B"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config TEGRA_DEBUG_UARTC
bool "Kernel low-level debugging messages via Tegra UART C"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config TEGRA_DEBUG_UARTD
bool "Kernel low-level debugging messages via Tegra UART D"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config TEGRA_DEBUG_UARTE
bool "Kernel low-level debugging messages via Tegra UART E"
depends on ARCH_TEGRA
select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
config DEBUG_U300_UART config DEBUG_U300_UART
bool "Kernel low-level debugging messages via U300 UART0" bool "Kernel low-level debugging messages via U300 UART0"
depends on ARCH_U300 depends on ARCH_U300
@ -1154,14 +1168,6 @@ choice
Say Y here if you want kernel low-level debugging support Say Y here if you want kernel low-level debugging support
on Ux500 based platforms. on Ux500 based platforms.
config DEBUG_MT6589_UART0
bool "Mediatek mt6589 UART0"
depends on ARCH_MEDIATEK
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
for Mediatek mt6589 based platforms on UART0.
config DEBUG_VERSATILE config DEBUG_VERSATILE
bool "Kernel low-level debugging messages via ARM Versatile UART" bool "Kernel low-level debugging messages via ARM Versatile UART"
depends on ARCH_VERSATILE depends on ARCH_VERSATILE
@ -1170,22 +1176,6 @@ choice
Say Y here if you want kernel low-level debugging support Say Y here if you want kernel low-level debugging support
on ARM Versatile platforms. on ARM Versatile platforms.
config DEBUG_MT8127_UART0
bool "Mediatek mt8127/mt6592 UART0"
depends on ARCH_MEDIATEK
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
for Mediatek mt8127 based platforms on UART0.
config DEBUG_MT8135_UART3
bool "Mediatek mt8135 UART3"
depends on ARCH_MEDIATEK
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
for Mediatek mt8135 based platforms on UART3.
config DEBUG_VEXPRESS_UART0_DETECT config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU depends on ARCH_VEXPRESS && CPU_CP15_MMU
@ -1222,6 +1212,13 @@ choice
This option selects UART0 at 0xb0090000. This is appropriate for This option selects UART0 at 0xb0090000. This is appropriate for
Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
config DEBUG_VF_UART
bool "Vybrid UART"
depends on SOC_VF610
help
Say Y here if you want kernel low-level debugging support
on Vybrid based platforms.
config DEBUG_VT8500_UART0 config DEBUG_VT8500_UART0
bool "Use UART0 on VIA/Wondermedia SoCs" bool "Use UART0 on VIA/Wondermedia SoCs"
depends on ARCH_VT8500 depends on ARCH_VT8500
@ -1229,6 +1226,35 @@ choice
This option selects UART0 on VIA/Wondermedia System-on-a-chip This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850. devices, including VT8500, WM8505, WM8650 and WM8850.
config DEBUG_ZTE_ZX
bool "Use ZTE ZX UART"
select DEBUG_UART_PL01X
depends on ARCH_ZX
help
Say Y here if you are enabling ZTE ZX296702 SOC and need
debug uart support.
This option is preferred over the platform specific
options; the platform specific options are deprecated
and will be soon removed.
config DEBUG_ZYNQ_UART0
bool "Kernel low-level debugging on Xilinx Zynq using UART0"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
their output to UART0 on the Zynq platform.
config DEBUG_ZYNQ_UART1
bool "Kernel low-level debugging on Xilinx Zynq using UART1"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
their output to UART1 on the Zynq platform.
If you have a ZC702 board and want early boot messages to
appear on the USB serial adaptor, select this option.
config DEBUG_ICEDCC config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel" bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help help
@ -1256,18 +1282,6 @@ choice
For more details about semihosting, please see For more details about semihosting, please see
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
config DEBUG_ZTE_ZX
bool "Use ZTE ZX UART"
select DEBUG_UART_PL01X
depends on ARCH_ZX
help
Say Y here if you are enabling ZTE ZX296702 SOC and need
debug uart support.
This option is preferred over the platform specific
options; the platform specific options are deprecated
and will be soon removed.
config DEBUG_LL_UART_8250 config DEBUG_LL_UART_8250
bool "Kernel low-level debugging via 8250 UART" bool "Kernel low-level debugging via 8250 UART"
help help
@ -1281,20 +1295,6 @@ choice
options; the platform specific options are deprecated options; the platform specific options are deprecated
and will be soon removed. and will be soon removed.
config DEBUG_LL_UART_EFM32
bool "Kernel low-level debugging via efm32 UART"
depends on ARCH_EFM32
help
Say Y here if you want the debug print routines to direct
their output to an UART or USART port on efm32 based
machines. Use the following addresses for DEBUG_UART_PHYS:
0x4000c000 | USART0
0x4000c400 | USART1
0x4000c800 | USART2
0x4000e000 | UART0
0x4000e400 | UART1
config DEBUG_LL_UART_PL01X config DEBUG_LL_UART_PL01X
bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
help help
@ -1559,6 +1559,7 @@ config DEBUG_UART_VIRT
default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1 default 0xf1c28400 if DEBUG_SUNXI_UART1
default 0xf1f02800 if DEBUG_SUNXI_R_UART default 0xf1f02800 if DEBUG_SUNXI_R_UART
default 0xf31004c0 if DEBUG_MESON_UARTAO
default 0xf4090000 if DEBUG_LPC32XX default 0xf4090000 if DEBUG_LPC32XX
default 0xf4200000 if DEBUG_GEMINI default 0xf4200000 if DEBUG_GEMINI
default 0xf6200000 if DEBUG_PXA_UART1 default 0xf6200000 if DEBUG_PXA_UART1
@ -1585,7 +1586,6 @@ config DEBUG_UART_VIRT
default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE
default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X
default 0xf31004c0 if DEBUG_MESON_UARTAO
default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART