From ded4926aa28992efcb67dd27a642ddf139ac572b Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 28 Mar 2008 11:19:56 -0600 Subject: [PATCH 001/187] Add the seq_file documentation This is an updated version of the document describing the seq_file interface. Signed-off-by: Jonathan Corbet --- Documentation/filesystems/00-INDEX | 2 + Documentation/filesystems/seq_file.txt | 283 +++++++++++++++++++++++++ 2 files changed, 285 insertions(+) create mode 100644 Documentation/filesystems/seq_file.txt diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index e68021c08fbd..e731196410b3 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -82,6 +82,8 @@ relay.txt - info on relay, for efficient streaming from kernel to user space. romfs.txt - description of the ROMFS filesystem. +seq_file.txt + - how to use the seq_file API sharedsubtree.txt - a description of shared subtrees for namespaces. smbfs.txt diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt new file mode 100644 index 000000000000..92975ee7942c --- /dev/null +++ b/Documentation/filesystems/seq_file.txt @@ -0,0 +1,283 @@ +The seq_file interface + + Copyright 2003 Jonathan Corbet + This file is originally from the LWN.net Driver Porting series at + http://lwn.net/Articles/driver-porting/ + + +There are numerous ways for a device driver (or other kernel component) to +provide information to the user or system administrator. One useful +technique is the creation of virtual files, in debugfs, /proc or elsewhere. +Virtual files can provide human-readable output that is easy to get at +without any special utility programs; they can also make life easier for +script writers. It is not surprising that the use of virtual files has +grown over the years. + +Creating those files correctly has always been a bit of a challenge, +however. It is not that hard to make a virtual file which returns a +string. But life gets trickier if the output is long - anything greater +than an application is likely to read in a single operation. Handling +multiple reads (and seeks) requires careful attention to the reader's +position within the virtual file - that position is, likely as not, in the +middle of a line of output. The kernel has traditionally had a number of +implementations that got this wrong. + +The 2.6 kernel contains a set of functions (implemented by Alexander Viro) +which are designed to make it easy for virtual file creators to get it +right. + +The seq_file interface is available via . There are +three aspects to seq_file: + + * An iterator interface which lets a virtual file implementation + step through the objects it is presenting. + + * Some utility functions for formatting objects for output without + needing to worry about things like output buffers. + + * A set of canned file_operations which implement most operations on + the virtual file. + +We'll look at the seq_file interface via an extremely simple example: a +loadable module which creates a file called /proc/sequence. The file, when +read, simply produces a set of increasing integer values, one per line. The +sequence will continue until the user loses patience and finds something +better to do. The file is seekable, in that one can do something like the +following: + + dd if=/proc/sequence of=out1 count=1 + dd if=/proc/sequence skip=1 out=out2 count=1 + +Then concatenate the output files out1 and out2 and get the right +result. Yes, it is a thoroughly useless module, but the point is to show +how the mechanism works without getting lost in other details. (Those +wanting to see the full source for this module can find it at +http://lwn.net/Articles/22359/). + + +The iterator interface + +Modules implementing a virtual file with seq_file must implement a simple +iterator object that allows stepping through the data of interest. +Iterators must be able to move to a specific position - like the file they +implement - but the interpretation of that position is up to the iterator +itself. A seq_file implementation that is formatting firewall rules, for +example, could interpret position N as the Nth rule in the chain. +Positioning can thus be done in whatever way makes the most sense for the +generator of the data, which need not be aware of how a position translates +to an offset in the virtual file. The one obvious exception is that a +position of zero should indicate the beginning of the file. + +The /proc/sequence iterator just uses the count of the next number it +will output as its position. + +Four functions must be implemented to make the iterator work. The first, +called start() takes a position as an argument and returns an iterator +which will start reading at that position. For our simple sequence example, +the start() function looks like: + + static void *ct_seq_start(struct seq_file *s, loff_t *pos) + { + loff_t *spos = kmalloc(sizeof(loff_t), GFP_KERNEL); + if (! spos) + return NULL; + *spos = *pos; + return spos; + } + +The entire data structure for this iterator is a single loff_t value +holding the current position. There is no upper bound for the sequence +iterator, but that will not be the case for most other seq_file +implementations; in most cases the start() function should check for a +"past end of file" condition and return NULL if need be. + +For more complicated applications, the private field of the seq_file +structure can be used. There is also a special value whch can be returned +by the start() function called SEQ_START_TOKEN; it can be used if you wish +to instruct your show() function (described below) to print a header at the +top of the output. SEQ_START_TOKEN should only be used if the offset is +zero, however. + +The next function to implement is called, amazingly, next(); its job is to +move the iterator forward to the next position in the sequence. The +example module can simply increment the position by one; more useful +modules will do what is needed to step through some data structure. The +next() function returns a new iterator, or NULL if the sequence is +complete. Here's the example version: + + static void *ct_seq_next(struct seq_file *s, void *v, loff_t *pos) + { + loff_t *spos = (loff_t *) v; + *pos = ++(*spos); + return spos; + } + +The stop() function is called when iteration is complete; its job, of +course, is to clean up. If dynamic memory is allocated for the iterator, +stop() is the place to free it. + + static void ct_seq_stop(struct seq_file *s, void *v) + { + kfree(v); + } + +Finally, the show() function should format the object currently pointed to +by the iterator for output. It should return zero, or an error code if +something goes wrong. The example module's show() function is: + + static int ct_seq_show(struct seq_file *s, void *v) + { + loff_t *spos = (loff_t *) v; + seq_printf(s, "%Ld\n", *spos); + return 0; + } + +We will look at seq_printf() in a moment. But first, the definition of the +seq_file iterator is finished by creating a seq_operations structure with +the four functions we have just defined: + + static struct seq_operations ct_seq_ops = { + .start = ct_seq_start, + .next = ct_seq_next, + .stop = ct_seq_stop, + .show = ct_seq_show + }; + +This structure will be needed to tie our iterator to the /proc file in +a little bit. + +It's worth noting that the interator value returned by start() and +manipulated by the other functions is considered to be completely opaque by +the seq_file code. It can thus be anything that is useful in stepping +through the data to be output. Counters can be useful, but it could also be +a direct pointer into an array or linked list. Anything goes, as long as +the programmer is aware that things can happen between calls to the +iterator function. However, the seq_file code (by design) will not sleep +between the calls to start() and stop(), so holding a lock during that time +is a reasonable thing to do. The seq_file code will also avoid taking any +other locks while the iterator is active. + + +Formatted output + +The seq_file code manages positioning within the output created by the +iterator and getting it into the user's buffer. But, for that to work, that +output must be passed to the seq_file code. Some utility functions have +been defined which make this task easy. + +Most code will simply use seq_printf(), which works pretty much like +printk(), but which requires the seq_file pointer as an argument. It is +common to ignore the return value from seq_printf(), but a function +producing complicated output may want to check that value and quit if +something non-zero is returned; an error return means that the seq_file +buffer has been filled and further output will be discarded. + +For straight character output, the following functions may be used: + + int seq_putc(struct seq_file *m, char c); + int seq_puts(struct seq_file *m, const char *s); + int seq_escape(struct seq_file *m, const char *s, const char *esc); + +The first two output a single character and a string, just like one would +expect. seq_escape() is like seq_puts(), except that any character in s +which is in the string esc will be represented in octal form in the output. + +There is also a function for printing filenames: + + int seq_path(struct seq_file *m, struct path *path, char *esc); + +Here, path indicates the file of interest, and esc is a set of characters +which should be escaped in the output. + + +Making it all work + +So far, we have a nice set of functions which can produce output within the +seq_file system, but we have not yet turned them into a file that a user +can see. Creating a file within the kernel requires, of course, the +creation of a set of file_operations which implement the operations on that +file. The seq_file interface provides a set of canned operations which do +most of the work. The virtual file author still must implement the open() +method, however, to hook everything up. The open function is often a single +line, as in the example module: + + static int ct_open(struct inode *inode, struct file *file) + { + return seq_open(file, &ct_seq_ops); + }; + +Here, the call to seq_open() takes the seq_operations structure we created +before, and gets set up to iterate through the virtual file. + +On a successful open, seq_open() stores the struct seq_file pointer in +file->private_data. If you have an application where the same iterator can +be used for more than one file, you can store an arbitrary pointer in the +private field of the seq_file structure; that value can then be retrieved +by the iterator functions. + +The other operations of interest - read(), llseek(), and release() - are +all implemented by the seq_file code itself. So a virtual file's +file_operations structure will look like: + + static struct file_operations ct_file_ops = { + .owner = THIS_MODULE, + .open = ct_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release + }; + +There is also a seq_release_private() which passes the contents of the +seq_file private field to kfree() before releasing the structure. + +The final step is the creation of the /proc file itself. In the example +code, that is done in the initialization code in the usual way: + + static int ct_init(void) + { + struct proc_dir_entry *entry; + + entry = create_proc_entry("sequence", 0, NULL); + if (entry) + entry->proc_fops = &ct_file_ops; + return 0; + } + + module_init(ct_init); + +And that is pretty much it. + + +seq_list + +If your file will be iterating through a linked list, you may find these +routines useful: + + struct list_head *seq_list_start(struct list_head *head, + loff_t pos); + struct list_head *seq_list_start_head(struct list_head *head, + loff_t pos); + struct list_head *seq_list_next(void *v, struct list_head *head, + loff_t *ppos); + +These helpers will interpret pos as a position within the list and iterate +accordingly. Your start() and next() functions need only invoke the +seq_list_* helpers with a pointer to the appropriate list_head structure. + + +The extra-simple version + +For extremely simple virtual files, there is an even easier interface. A +module can define only the show() function, which should create all the +output that the virtual file will contain. The file's open() method then +calls: + + int single_open(struct file *file, + int (*show)(struct seq_file *m, void *p), + void *data); + +When output time comes, the show() function will be called once. The data +value given to single_open() can be found in the private field of the +seq_file structure. When using single_open(), the programmer should use +single_release() instead of seq_release() in the file_operations structure +to avoid a memory leak. From ef40203a09823bc2c69168ffa626c46365e3ca2c Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 28 Mar 2008 11:22:38 -0600 Subject: [PATCH 002/187] Fill out information on patch tags in SubmittingPatches Add more information about the various patch tags in use, and try to establish a meaning for Reviewed-by: Signed-off-by: Jonathan Corbet --- Documentation/SubmittingPatches | 54 +++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 3 deletions(-) diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 08a1ed1cb5d8..cc00c8e8f040 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -328,7 +328,7 @@ now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. -13) When to use Acked-by: +13) When to use Acked-by: and Cc: The Signed-off-by: tag indicates that the signer was involved in the development of the patch, or that he/she was in the patch's delivery path. @@ -349,11 +349,59 @@ Acked-by: does not necessarily indicate acknowledgement of the entire patch. For example, if a patch affects multiple subsystems and has an Acked-by: from one subsystem maintainer then this usually indicates acknowledgement of just the part which affects that maintainer's code. Judgement should be used here. - When in doubt people should refer to the original discussion in the mailing +When in doubt people should refer to the original discussion in the mailing list archives. +If a person has had the opportunity to comment on a patch, but has not +provided such comments, you may optionally add a "Cc:" tag to the patch. +This is the only tag which might be added without an explicit action by the +person it names. This tag documents that potentially interested parties +have been included in the discussion -14) The canonical patch format + +14) Using Test-by: and Reviewed-by: + +A Tested-by: tag indicates that the patch has been successfully tested (in +some environment) by the person named. This tag informs maintainers that +some testing has been performed, provides a means to locate testers for +future patches, and ensures credit for the testers. + +Reviewed-by:, instead, indicates that the patch has been reviewed and found +acceptable according to the Reviewer's Statement: + + Reviewer's statement of oversight + + By offering my Reviewed-by: tag, I state that: + + (a) I have carried out a technical review of this patch to + evaluate its appropriateness and readiness for inclusion into + the mainline kernel. + + (b) Any problems, concerns, or questions relating to the patch + have been communicated back to the submitter. I am satisfied + with the submitter's response to my comments. + + (c) While there may be things that could be improved with this + submission, I believe that it is, at this time, (1) a + worthwhile modification to the kernel, and (2) free of known + issues which would argue against its inclusion. + + (d) While I have reviewed the patch and believe it to be sound, I + do not (unless explicitly stated elsewhere) make any + warranties or guarantees that it will achieve its stated + purpose or function properly in any given situation. + +A Reviewed-by tag is a statement of opinion that the patch is an +appropriate modification of the kernel without any remaining serious +technical issues. Any interested reviewer (who has done the work) can +offer a Reviewed-by tag for a patch. This tag serves to give credit to +reviewers and to inform maintainers of the degree of review which has been +done on the patch. Reviewed-by: tags, when supplied by reviewers known to +understand the subject area and to perform thorough reviews, will normally +increase the liklihood of your patch getting into the kernel. + + +15) The canonical patch format The canonical patch subject line is: From f3271f656458063e9bb0da9ba920771ecc6f024c Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 28 Mar 2008 20:09:39 +0100 Subject: [PATCH 003/187] Fixes to the seq_file document On Friday 2008-03-28 19:20, Jonathan Corbet wrote: >commit 9756ccfda31b4c4544aa010aacf71b6672d668e8 >Date: Fri Mar 28 11:19:56 2008 -0600 > > Add the seq_file documentation patch on top: - add const qualifiers - remove void* casts - use proper specifier (%Ld is not valid) Signed-off-by: Jonathan Corbet Signed-off-by: Jan Engelhardt --- Documentation/filesystems/seq_file.txt | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt index 92975ee7942c..cc6cdb95b73a 100644 --- a/Documentation/filesystems/seq_file.txt +++ b/Documentation/filesystems/seq_file.txt @@ -107,8 +107,8 @@ complete. Here's the example version: static void *ct_seq_next(struct seq_file *s, void *v, loff_t *pos) { - loff_t *spos = (loff_t *) v; - *pos = ++(*spos); + loff_t *spos = v; + *pos = ++*spos; return spos; } @@ -127,8 +127,8 @@ something goes wrong. The example module's show() function is: static int ct_seq_show(struct seq_file *s, void *v) { - loff_t *spos = (loff_t *) v; - seq_printf(s, "%Ld\n", *spos); + loff_t *spos = v; + seq_printf(s, "%lld\n", (long long)*spos); return 0; } @@ -136,7 +136,7 @@ We will look at seq_printf() in a moment. But first, the definition of the seq_file iterator is finished by creating a seq_operations structure with the four functions we have just defined: - static struct seq_operations ct_seq_ops = { + static const struct seq_operations ct_seq_ops = { .start = ct_seq_start, .next = ct_seq_next, .stop = ct_seq_stop, @@ -204,7 +204,7 @@ line, as in the example module: static int ct_open(struct inode *inode, struct file *file) { return seq_open(file, &ct_seq_ops); - }; + } Here, the call to seq_open() takes the seq_operations structure we created before, and gets set up to iterate through the virtual file. @@ -219,7 +219,7 @@ The other operations of interest - read(), llseek(), and release() - are all implemented by the seq_file code itself. So a virtual file's file_operations structure will look like: - static struct file_operations ct_file_ops = { + static const struct file_operations ct_file_ops = { .owner = THIS_MODULE, .open = ct_open, .read = seq_read, From b40b5162ac4e5b94d16cd9fb0a87168b1633c7dd Mon Sep 17 00:00:00 2001 From: Will Newton Date: Fri, 28 Mar 2008 19:39:17 +0000 Subject: [PATCH 004/187] Fix a typo in highres.txt A small patch for the highres timers documentation: Signed-off-by: Will newton Signed-off-by: Jonathan Corbet --- Documentation/hrtimers/highres.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/hrtimers/highres.txt b/Documentation/hrtimers/highres.txt index ce0e9a91e157..a73ecf5b4bdb 100644 --- a/Documentation/hrtimers/highres.txt +++ b/Documentation/hrtimers/highres.txt @@ -98,7 +98,7 @@ System-level global event devices are used for the Linux periodic tick. Per-CPU event devices are used to provide local CPU functionality such as process accounting, profiling, and high resolution timers. -The management layer assignes one or more of the folliwing functions to a clock +The management layer assigns one or more of the following functions to a clock event device: - system global periodic tick (jiffies update) - cpu local update_process_times From 8e8ff3a309ebdaad51fd7a64a6fd2a2f88b30d87 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 12 Mar 2008 23:02:13 +0300 Subject: [PATCH 005/187] [POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts Due to chip constraint MPC837x USB DR module can only use ULPI and serial PHY interfaces. The patch fixes the wrong type in dts. This patch fixes USB malfunctioning on the MPC837xE-RDB boards. Similar patch has been already applied for the MDS boards: commit 28b958859206b7010d03129611c2e444898e3ee4 Author: Li Yang Date: Thu Mar 6 18:42:26 2008 +0800 [POWERPC] 83xx: Fix wrong USB phy type in mpc837xmds dts Signed-off-by: Anton Vorontsov Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_rdb.dts | 3 +-- arch/powerpc/boot/dts/mpc8378_rdb.dts | 3 +-- arch/powerpc/boot/dts/mpc8379_rdb.dts | 3 +-- 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 440aa4dfab0c..5bc09ad016f5 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -143,7 +143,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -151,7 +150,7 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 92711534b179..711f9a30f9ab 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -143,7 +143,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -151,7 +150,7 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi"; + phy_type = "ulpi"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 0dda2fc558f8..c11ceb7d3299 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -143,7 +143,6 @@ mode = "cpu"; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; @@ -151,7 +150,7 @@ #size-cells = <0>; interrupt-parent = <&ipic>; interrupts = <38 0x8>; - phy_type = "utmi"; + phy_type = "ulpi"; }; mdio@24520 { From 58bb7a973b1d3c0a5127477fb049bbfc5ce02fb5 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 28 Mar 2008 10:51:29 -0500 Subject: [PATCH 006/187] [POWERPC] 83xx: enable usb in 837x rdb and 83xx defconfigs Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc837x_rdb_defconfig | 24 +++++++++++++++++++++- arch/powerpc/configs/mpc83xx_defconfig | 24 +++++++++++++++++++++- 2 files changed, 46 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/mpc837x_rdb_defconfig index 44093a0eaf88..a6331769d88f 100644 --- a/arch/powerpc/configs/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/mpc837x_rdb_defconfig @@ -684,7 +684,29 @@ CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 1f6cf68e89f8..029d2dab7deb 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -690,7 +690,29 @@ CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' From 96ce1b6dc5824cc6027c954b9a2e4717c70e01b5 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Fri, 28 Mar 2008 10:51:33 -0500 Subject: [PATCH 007/187] [POWERPC] sata_fsl: reduce compatibility to fsl,pq-sata as prescribed in Documentation/powerpc/booting-without-of.txt. Signed-off-by: Kim Phillips Acked-by: Jeff Garzik Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_mds.dts | 4 ++-- arch/powerpc/boot/dts/mpc8379_mds.dts | 8 ++++---- drivers/ata/sata_fsl.c | 5 +---- 3 files changed, 7 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 49c05e97386c..eac8e1b59496 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -255,14 +255,14 @@ }; sata@18000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; }; sata@19000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index fdb4a9255b24..6f78a9fd9826 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -255,28 +255,28 @@ }; sata@18000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; interrupts = <44 0x8>; interrupt-parent = <&ipic>; }; sata@19000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x19000 0x1000>; interrupts = <45 0x8>; interrupt-parent = <&ipic>; }; sata@1a000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x1a000 0x1000>; interrupts = <46 0x8>; interrupt-parent = <&ipic>; }; sata@1b000 { - compatible = "fsl,mpc8379-sata"; + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x1b000 0x1000>; interrupts = <47 0x8>; interrupt-parent = <&ipic>; diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 07791a7a48a5..4c1985511548 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1348,10 +1348,7 @@ static int sata_fsl_remove(struct of_device *ofdev) static struct of_device_id fsl_sata_match[] = { { - .compatible = "fsl,mpc8315-sata", - }, - { - .compatible = "fsl,mpc8379-sata", + .compatible = "fsl,pq-sata", }, {}, }; From 049c9d45531d9825bf737891163a794fca1421c5 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 31 Mar 2008 11:13:21 -0500 Subject: [PATCH 008/187] [POWERPC] fsldma: Use compatiable binding as spec Documentation/powerpc/booting-without-of.txt specifies the compatiables we should bind to for this driver (elo, eloplus). Use these instead of the extremely specific 'mpc8540' and 'mpc8349' compatiables. Acked-by: Dan Williams Signed-off-by: Kumar Gala --- drivers/dma/fsldma.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 72692309398a..df163687c91a 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -1021,11 +1021,11 @@ const u32 mpc8349_dma_ip_feature = FSL_DMA_IP_83XX | FSL_DMA_LITTLE_ENDIAN; static struct of_device_id of_fsl_dma_chan_ids[] = { { - .compatible = "fsl,mpc8540-dma-channel", + .compatible = "fsl,eloplus-dma-channel", .data = (void *)&mpc8540_dma_ip_feature, }, { - .compatible = "fsl,mpc8349-dma-channel", + .compatible = "fsl,elo-dma-channel", .data = (void *)&mpc8349_dma_ip_feature, }, {} @@ -1107,8 +1107,8 @@ err: } static struct of_device_id of_fsl_dma_ids[] = { - { .compatible = "fsl,mpc8540-dma", }, - { .compatible = "fsl,mpc8349-dma", }, + { .compatible = "fsl,eloplus-dma", }, + { .compatible = "fsl,elo-dma", }, {} }; From 1e85d89fa3954eff332033c0e75f6e2442be44ed Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 31 Mar 2008 11:53:46 -0500 Subject: [PATCH 009/187] [POWERPC] Fix defconfigs so we dont set both GENRTC and RTCLIB The new rtc subsystem conflicts with genrtc so don't enable GENRTC if RTCLIB is enabled. Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc832x_mds_defconfig | 11 +++-------- arch/powerpc/configs/mpc834x_mds_defconfig | 11 +++-------- arch/powerpc/configs/mpc836x_mds_defconfig | 11 +++-------- arch/powerpc/configs/mpc8544_ds_defconfig | 11 +++-------- arch/powerpc/configs/mpc8568mds_defconfig | 11 +++-------- arch/powerpc/configs/mpc8572_ds_defconfig | 11 +++-------- arch/powerpc/configs/mpc85xx_defconfig | 11 +++-------- arch/powerpc/configs/mpc8641_hpcn_defconfig | 11 +++-------- arch/powerpc/configs/prpmc2800_defconfig | 11 +++-------- arch/powerpc/configs/storcenter_defconfig | 11 +++-------- 10 files changed, 30 insertions(+), 80 deletions(-) diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/mpc832x_mds_defconfig index 79d228f84c5a..50cceda8994f 100644 --- a/arch/powerpc/configs/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:16 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:36:51 2008 # # CONFIG_PPC64 is not set @@ -628,8 +628,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -824,10 +823,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig index 9360144942f1..b4e82c0e2be7 100644 --- a/arch/powerpc/configs/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:20 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:36:56 2008 # # CONFIG_PPC64 is not set @@ -571,8 +571,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -767,10 +766,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/mpc836x_mds_defconfig index 7c8b06046d5d..d50a96eddcdc 100644 --- a/arch/powerpc/configs/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:21 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:36:57 2008 # # CONFIG_PPC64 is not set @@ -626,8 +626,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -822,10 +821,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig index c75b6aee76d1..418bcdb5f919 100644 --- a/arch/powerpc/configs/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:26 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:03 2008 # # CONFIG_PPC64 is not set @@ -742,8 +742,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -1209,10 +1208,6 @@ CONFIG_USB_MON=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig index e7da4b96cdeb..2b866b385607 100644 --- a/arch/powerpc/configs/mpc8568mds_defconfig +++ b/arch/powerpc/configs/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:28 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:05 2008 # # CONFIG_PPC64 is not set @@ -629,8 +629,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -825,10 +824,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/mpc8572_ds_defconfig index 460afe99c653..53aa6f3173a5 100644 --- a/arch/powerpc/configs/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/mpc8572_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:29 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:06 2008 # # CONFIG_PPC64 is not set @@ -742,8 +742,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -1209,10 +1208,6 @@ CONFIG_USB_MON=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 615e4c1bf735..2075722911bb 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:31 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:08 2008 # # CONFIG_PPC64 is not set @@ -750,8 +750,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -1217,10 +1216,6 @@ CONFIG_USB_MON=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig index 994e76817967..d01dcdb70bd7 100644 --- a/arch/powerpc/configs/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:34 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:11 2008 # # CONFIG_PPC64 is not set @@ -736,8 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -1203,10 +1202,6 @@ CONFIG_USB_MON=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index f53d55bbdd7c..f9121685f11a 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:37 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:15 2008 # # CONFIG_PPC64 is not set @@ -855,8 +855,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -1129,10 +1128,6 @@ CONFIG_USB_MON=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 8fc85747a0a7..fdbfd39a3aca 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:41 2008 +# Linux kernel version: 2.6.25-rc7 +# Mon Mar 31 11:37:19 2008 # # CONFIG_PPC64 is not set @@ -717,8 +717,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set +# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -931,10 +930,6 @@ CONFIG_USB_STORAGE=y # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set From 0035a1dc8f56f2c92f4246b0c8b5f6d1ee10c76b Mon Sep 17 00:00:00 2001 From: Tobias Mueller Date: Wed, 2 Apr 2008 10:02:06 -0400 Subject: [PATCH 010/187] Input: appletouch - add product IDs for the 4th generation MacBooks Signed-off-by: Tobias Mueller Acked-by: Johannes Berg Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/appletouch.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index b4423a471f02..8dd3942f3022 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -62,6 +62,10 @@ #define GEYSER4_ISO_PRODUCT_ID 0x021B #define GEYSER4_JIS_PRODUCT_ID 0x021C +#define GEYSER4_HF_ANSI_PRODUCT_ID 0x0229 +#define GEYSER4_HF_ISO_PRODUCT_ID 0x022A +#define GEYSER4_HF_JIS_PRODUCT_ID 0x022B + #define ATP_DEVICE(prod) \ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ USB_DEVICE_ID_MATCH_INT_CLASS | \ @@ -93,6 +97,10 @@ static struct usb_device_id atp_table [] = { { ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) }, { ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER4_HF_ANSI_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER4_HF_ISO_PRODUCT_ID) }, + { ATP_DEVICE(GEYSER4_HF_JIS_PRODUCT_ID) }, + /* Terminating entry */ { } }; @@ -217,7 +225,10 @@ static inline int atp_is_geyser_3(struct atp *dev) (productId == GEYSER3_JIS_PRODUCT_ID) || (productId == GEYSER4_ANSI_PRODUCT_ID) || (productId == GEYSER4_ISO_PRODUCT_ID) || - (productId == GEYSER4_JIS_PRODUCT_ID); + (productId == GEYSER4_JIS_PRODUCT_ID) || + (productId == GEYSER4_HF_ANSI_PRODUCT_ID) || + (productId == GEYSER4_HF_ISO_PRODUCT_ID) || + (productId == GEYSER4_HF_JIS_PRODUCT_ID); } /* From 025306f30948836a743eb68a7cbaf4ab0bfb5f47 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 2 Apr 2008 16:46:31 +0200 Subject: [PATCH 011/187] [POWERPC] Fix CPM2 SCC1 clock initialization. A missing break statement in a switch caused cpm2_clk_setup() to initialize SCC2 instead of SCC1. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/cpm2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 7be711232124..dd066bb1d562 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -240,6 +240,7 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) case CPM_CLK_SCC1: reg = &im_cpmux->cmx_scr; shift = 24; + break; case CPM_CLK_SCC2: reg = &im_cpmux->cmx_scr; shift = 16; From ff3da2e0938bae36d10d69c22bce0177b067a9e2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 2 Apr 2008 15:58:40 +1100 Subject: [PATCH 012/187] [POWERPC] Fix iSeries hard irq enabling regression A subtle bug sneaked into iSeries recently. On this platform, we must not normally clear MSR:EE (the hardware external interrupt enable) except for short periods of time. Taking an interrupt while soft-disabled doesn't cause us to clear it for example. The iSeries kernel expects to mostly run with MSR:EE enabled at all times except in a few exception entry/exit code paths. Thus local_irq_enable() doesn't check if it needs to hard-enable as it expects this to be unnecessary on iSeries. However, hard_irq_disable() _does_ cause MSR:EE to be cleared, including on iSeries. A call to it was recently added to the context switch code, thus causing interrupts to become disabled for a long periods of time, causing the iSeries watchdog to kick in under some circumstances and other nasty things. This patch fixes it by making local_irq_enable() properly re-enable MSR:EE on iSeries. It basically removes a return statement here to make iSeries use the same code path as everybody else. That does mean that we might occasionally get spurious decrementer interrupts but I don't think that matters. Another option would have been to make hard_irq_disable() a nop on iSeries but I didn't like it much, in case we have good reasons to hard-disable. Part of the patch is fixes to make sure the hard_enabled PACA field is properly set on iSeries as it used not to be before, since it was mostly unused. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 13 +++++++------ arch/powerpc/kernel/irq.c | 1 - 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 11b4f6d9ffce..d3aee08e6814 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1387,12 +1387,14 @@ __secondary_start: #ifdef CONFIG_PPC_ISERIES BEGIN_FW_FTR_SECTION ori r4,r4,MSR_EE + li r8,1 + stb r8,PACAHARDIRQEN(r13) END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif BEGIN_FW_FTR_SECTION - stb r7,PACASOFTIRQEN(r13) stb r7,PACAHARDIRQEN(r13) END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) + stb r7,PACASOFTIRQEN(r13) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 @@ -1520,15 +1522,14 @@ _INIT_GLOBAL(start_here_common) #ifdef CONFIG_PPC_ISERIES BEGIN_FW_FTR_SECTION mfmsr r5 - ori r5,r5,MSR_EE /* Hard Enabled */ + ori r5,r5,MSR_EE /* Hard Enabled on iSeries*/ mtmsrd r5 + li r5,1 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif -BEGIN_FW_FTR_SECTION - stb r5,PACAHARDIRQEN(r13) -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) + stb r5,PACAHARDIRQEN(r13) /* Hard Disabled on others */ - bl .start_kernel + bl .start_kernel /* Not reached */ BUG_OPCODE diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index b0e5deb4274f..292163f5b39a 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -143,7 +143,6 @@ void local_irq_restore(unsigned long en) */ if (local_paca->lppaca_ptr->int_dword.any_int) iseries_handle_interrupts(); - return; } /* From b991f05f1326fd9e6212851d0f2099875906dd16 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 31 Mar 2008 07:49:27 +1100 Subject: [PATCH 013/187] [POWERPC] Fix deadlock with mmu_hash_lock in hash_page_sync hash_page_sync() takes and releases the low level mmu hash lock in order to sync with other processors disposing of page tables. Because that lock can be needed to service hash misses triggered by interrupt handlers, taking it must be done with interrupts off. However, hash_page_sync() appears to be called with interrupts enabled, thus causing occasional deadlocks. We fix it by making sure hash_page_sync() masks interrupts while holding the lock. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_low_32.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S index 7f830a4888d6..e10d76a860d3 100644 --- a/arch/powerpc/mm/hash_low_32.S +++ b/arch/powerpc/mm/hash_low_32.S @@ -44,6 +44,9 @@ mmu_hash_lock: #ifdef CONFIG_SMP .text _GLOBAL(hash_page_sync) + mfmsr r10 + rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */ + mtmsr r0 lis r8,mmu_hash_lock@h ori r8,r8,mmu_hash_lock@l lis r0,0x0fff @@ -60,8 +63,9 @@ _GLOBAL(hash_page_sync) eieio li r0,0 stw r0,0(r8) - blr -#endif + mtmsr r10 + blr +#endif /* CONFIG_SMP */ /* * Load a PTE into the hash table, if possible. From 7484839850d826e14b8b024bb048dca8489140ae Mon Sep 17 00:00:00 2001 From: Maxim Shchetynin Date: Wed, 2 Apr 2008 00:12:20 +1100 Subject: [PATCH 014/187] [POWERPC] Fix rtas_flash procfs interface Handling of the proc_dir_entry->count was changed in 2.6.24-rc5. After this change, the default value for pde->count is 1 and not 0 as before. Therefore, if we want to check whether our procfs file is already opened (already in use), we have to check if pde->count is greater than 2 rather than 1. Signed-off-by: Maxim Shchetynin Signed-off-by: Jens Osterkamp Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas_flash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index f2276593f416..538baf46f15f 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -356,7 +356,7 @@ static int rtas_excl_open(struct inode *inode, struct file *file) /* Enforce exclusive open with use count of PDE */ spin_lock(&flash_file_open_lock); - if (atomic_read(&dp->count) > 1) { + if (atomic_read(&dp->count) > 2) { spin_unlock(&flash_file_open_lock); return -EBUSY; } From 115e1adca3b75a82f24da8b2cc9386eb5b7e2cff Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Thu, 3 Apr 2008 01:26:02 +1100 Subject: [PATCH 015/187] [POWERPC] mpc5200: Amalgamated DTS fixes and updates DTS updates that fix booting problems on mpc5200-based boards: - change to ethernet reg property - addition of mdio and phy nodes - removal of pci node (Motion-Pro board) Other DTS updates: - update i2c device tree nodes - add lpb bus node and flash device (without partitions defined) - add rtc i2c nodes Signed-off-by: Marian Balakowicz Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/cm5200.dts | 37 ++++++++++++++++- arch/powerpc/boot/dts/motionpro.dts | 63 ++++++++++++++++------------- arch/powerpc/boot/dts/tqm5200.dts | 42 ++++++++++++++++++- 3 files changed, 112 insertions(+), 30 deletions(-) diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 30737eafe68e..c6ca6319e4f7 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -212,13 +212,30 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; @@ -231,4 +248,22 @@ reg = <8000 4000>; }; }; + + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 2000000>; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 2000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 76951ab038ee..2b0dde058f8e 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -148,7 +148,6 @@ interrupt-parent = <&mpc5200_pic>; }; - spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = ; @@ -209,10 +208,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@2 { + device_type = "ethernet-phy"; + reg = <2>; + }; }; ata@3a00 { @@ -223,11 +237,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <68>; + }; }; sram@8000 { @@ -240,7 +262,8 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <1 0 50000000 00010000 + ranges = <0 0 ff000000 01000000 + 1 0 50000000 00010000 2 0 50010000 00010000 3 0 50020000 00010000>; @@ -271,31 +294,15 @@ compatible = "promess,pro_module_dio"; reg = <3 800 2>; }; - }; - pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = ; - interrupt-map-mask = ; - interrupt-map = ; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 01000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; }; }; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index c86464f007da..65bcea6a0173 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -127,10 +127,25 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; ata@3a00 { @@ -141,11 +156,19 @@ }; i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <3d40 40>; interrupts = <2 10 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1307"; + reg = <68>; + }; }; sram@8000 { @@ -154,6 +177,23 @@ }; }; + lpb { + model = "fsl,lpb"; + compatible = "fsl,lpb"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 fc000000 02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; + pci@f0000d00 { #interrupt-cells = <1>; #size-cells = <2>; From 8d813941b17626a7610342325be63435282bac02 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ren=C3=A9=20B=C3=BCrgel?= Date: Thu, 3 Apr 2008 19:58:37 +1100 Subject: [PATCH 016/187] [POWERPC] Fix MPC5200 (not B!) device tree so FEC ethernet works MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This gets the FEC ethernet driver working again on the lite5200 platform. The FEC driver is also compatible with the MPC5200, not only with the MPC5200B, so this adds a suitable entry to the driver's match list. Furthermore this adds the settings for the PHY in the dts file for the Lite5200. Note, that this is not exactly the same as in the Lite5200B, because the PHY is located at f0003000:01 for the 5200, and at :00 for the 5200B. This was tested on a Lite5200 and a Lite5200B, both booted a kernel via tftp and mounted the root via nfs successfully. Signed-off-by: René Bürgel Acked-by: Grant Likely Signed-off-by: Paul Mackerras --- arch/powerpc/boot/dts/lite5200.dts | 15 +++++++++++++++ drivers/net/fec_mpc52xx.c | 1 + drivers/net/fec_mpc52xx_phy.c | 1 + 3 files changed, 17 insertions(+) diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 0d701c1bf539..09b4e16154d6 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -258,6 +258,21 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0:ethernet-phy@1 { + device_type = "ethernet-phy"; + reg = <1>; + }; }; ata@3a00 { diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index 58b71e60204e..fe59c27c09e3 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -1057,6 +1057,7 @@ static int mpc52xx_fec_of_resume(struct of_device *op) #endif static struct of_device_id mpc52xx_fec_match[] = { + { .type = "network", .compatible = "fsl,mpc5200b-fec", }, { .type = "network", .compatible = "fsl,mpc5200-fec", }, { .type = "network", .compatible = "mpc5200-fec", }, { } diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c index 6a3ac4ea97e9..1d0cd1dd955e 100644 --- a/drivers/net/fec_mpc52xx_phy.c +++ b/drivers/net/fec_mpc52xx_phy.c @@ -179,6 +179,7 @@ static int mpc52xx_fec_mdio_remove(struct of_device *of) static struct of_device_id mpc52xx_fec_mdio_match[] = { { .compatible = "fsl,mpc5200b-mdio", }, + { .compatible = "fsl,mpc5200-mdio", }, { .compatible = "mpc5200b-fec-phy", }, {} }; From 7c3cce978e4f933ac13758ec5d2554fc8d0927d2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 3 Apr 2008 15:07:24 -0700 Subject: [PATCH 017/187] [SPARC64]: Fix FPU saving in 64-bit signal handling. The calculation of the FPU reg save area pointer was wrong. Based upon an OOPS report from Tom Callaway. Signed-off-by: David S. Miller --- arch/sparc64/kernel/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c index 94a9d64208ee..9d51956e8e2f 100644 --- a/arch/sparc64/kernel/signal.c +++ b/arch/sparc64/kernel/signal.c @@ -357,7 +357,7 @@ static int invalid_frame_pointer(void __user *fp, int fplen) static inline int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu) { - unsigned long *fpregs = (unsigned long *)(regs+1); + unsigned long *fpregs = current_thread_info()->fpregs; unsigned long fprs; int err = 0; From a02fe13297af26c13d004b1d44f391c077094ea0 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 4 Apr 2008 09:35:05 +1100 Subject: [PATCH 018/187] selinux: prevent rentry into the FS BUG fix. Keep us from re-entering the fs when we aren't supposed to. See discussion at http://marc.info/?t=120716967100004&r=1&w=2 Signed-off-by: Josef Bacik Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/hooks.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index c2fef7b12dc7..820d07a60ab0 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -180,7 +180,7 @@ static int inode_alloc_security(struct inode *inode) struct task_security_struct *tsec = current->security; struct inode_security_struct *isec; - isec = kmem_cache_zalloc(sel_inode_cache, GFP_KERNEL); + isec = kmem_cache_zalloc(sel_inode_cache, GFP_NOFS); if (!isec) return -ENOMEM; @@ -2429,7 +2429,7 @@ static int selinux_inode_init_security(struct inode *inode, struct inode *dir, return -EOPNOTSUPP; if (name) { - namep = kstrdup(XATTR_SELINUX_SUFFIX, GFP_KERNEL); + namep = kstrdup(XATTR_SELINUX_SUFFIX, GFP_NOFS); if (!namep) return -ENOMEM; *name = namep; From 4cd13504652d28e16bf186c6bb2bbb3725369383 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 3 Apr 2008 23:35:22 +0100 Subject: [PATCH 019/187] splice: use mapping_gfp_mask The loop block driver is careful to mask __GFP_IO|__GFP_FS out of its mapping_gfp_mask, to avoid hangs under memory pressure. But nowadays it uses splice, usually going through __generic_file_splice_read. That must use mapping_gfp_mask instead of GFP_KERNEL to avoid those hangs. Signed-off-by: Hugh Dickins Cc: Jens Axboe Cc: Andrew Morton Signed-off-by: Linus Torvalds --- fs/splice.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/splice.c b/fs/splice.c index 0670c915cd35..a861bb318ac8 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -320,7 +320,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, break; error = add_to_page_cache_lru(page, mapping, index, - GFP_KERNEL); + mapping_gfp_mask(mapping)); if (unlikely(error)) { page_cache_release(page); if (error == -EEXIST) From ad16df848d7f84a1b7cea92edd515815ea4ccf0f Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Thu, 3 Apr 2008 10:44:01 +0100 Subject: [PATCH 020/187] afs: remove smp_prcessor_id() from debug macro Signed-off-by: Sven Schnelle Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/afs/internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 9ba16edc0af2..eec41c76de72 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -749,7 +749,7 @@ extern int afs_fsync(struct file *, struct dentry *, int); extern unsigned afs_debug; #define dbgprintk(FMT,...) \ - printk("[%x%-6.6s] "FMT"\n", smp_processor_id(), current->comm ,##__VA_ARGS__) + printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__) /* make sure we maintain the format strings, even when debugging is disabled */ static inline __attribute__((format(printf,1,2))) From 9f389f4b2016e0aa35cd9cbb5afcd55d58e0c56a Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Thu, 3 Apr 2008 10:45:30 +0100 Subject: [PATCH 021/187] rxrpc: remove smp_processor_id() from debug macro Signed-off-by: Sven Schnelle Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- net/rxrpc/ar-internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 126ca777b410..53fe94c9d36b 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -611,7 +611,7 @@ extern struct rxrpc_transport *rxrpc_find_transport(struct rxrpc_local *, extern unsigned rxrpc_debug; #define dbgprintk(FMT,...) \ - printk("[%x%-6.6s] "FMT"\n", smp_processor_id(), current->comm ,##__VA_ARGS__) + printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__) /* make sure we maintain the format strings, even when debugging is disabled */ static inline __attribute__((format(printf,1,2))) From 4ba51fd75cc3789be83f0d6f878dabbb0cb19bca Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 3 Apr 2008 14:18:55 -0700 Subject: [PATCH 022/187] x86 ptrace: avoid unnecessary wrmsr This avoids using wrmsr on MSR_IA32_DEBUGCTLMSR when it's not needed. No wrmsr ever needs to be done if noone has ever used block stepping. Without this change, using ptrace on 2.6.25 on an x86 KVM guest will tickle KVM's missing support for the MSR and crash the guest kernel. Though host KVM is the buggy one, this makes for a regression in the guest behavior from 2.6.24->2.6.25 that we can easily avoid. I also corrected some bad whitespace. Signed-off-by: Roland McGrath Cc: Ingo Molnar Cc: Thomas Gleixner Signed-off-by: Linus Torvalds --- arch/x86/kernel/step.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c index 9d406cdc847f..071ff4798236 100644 --- a/arch/x86/kernel/step.c +++ b/arch/x86/kernel/step.c @@ -140,6 +140,9 @@ static int enable_single_step(struct task_struct *child) */ static void write_debugctlmsr(struct task_struct *child, unsigned long val) { + if (child->thread.debugctlmsr == val) + return; + child->thread.debugctlmsr = val; if (child != current) @@ -165,11 +168,11 @@ static void enable_step(struct task_struct *child, bool block) write_debugctlmsr(child, child->thread.debugctlmsr | DEBUGCTLMSR_BTF); } else { - write_debugctlmsr(child, - child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF); + write_debugctlmsr(child, + child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF); - if (!child->thread.debugctlmsr) - clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR); + if (!child->thread.debugctlmsr) + clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR); } } From ad4f95764040077f16ebf24559d5a06f8fb133bc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 3 Apr 2008 16:55:14 -0700 Subject: [PATCH 023/187] [SPARC64]: Fix user accesses in regset code. If target is not current we need to use access_process_vm(). Noticed by Roland McGrath. Signed-off-by: David S. Miller --- arch/sparc64/kernel/ptrace.c | 136 +++++++++++++++++++++++++++++------ 1 file changed, 115 insertions(+), 21 deletions(-) diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index aaae865e7932..7963595c77cc 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -138,8 +138,17 @@ static int genregs64_get(struct task_struct *target, (regs->u_regs[UREG_I6] + STACK_BIAS); unsigned long window[16]; - if (copy_from_user(window, reg_window, sizeof(window))) - return -EFAULT; + if (target == current) { + if (copy_from_user(window, reg_window, sizeof(window))) + return -EFAULT; + } else { + if (access_process_vm(target, + (unsigned long) reg_window, + window, + sizeof(window), 0) != + sizeof(window)) + return -EFAULT; + } ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, window, @@ -190,16 +199,37 @@ static int genregs64_set(struct task_struct *target, (regs->u_regs[UREG_I6] + STACK_BIAS); unsigned long window[16]; - if (copy_from_user(window, reg_window, sizeof(window))) - return -EFAULT; + if (target == current) { + if (copy_from_user(window, reg_window, sizeof(window))) + return -EFAULT; + } else { + if (access_process_vm(target, + (unsigned long) reg_window, + window, + sizeof(window), 0) != + sizeof(window)) + return -EFAULT; + } ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, window, 16 * sizeof(u64), 32 * sizeof(u64)); - if (!ret && - copy_to_user(reg_window, window, sizeof(window))) - return -EFAULT; + if (!ret) { + if (target == current) { + if (copy_to_user(reg_window, window, + sizeof(window))) + return -EFAULT; + } else { + if (access_process_vm(target, + (unsigned long) + reg_window, + window, + sizeof(window), 1) != + sizeof(window)) + return -EFAULT; + } + } } if (!ret && count > 0) { @@ -412,9 +442,22 @@ static int genregs32_get(struct task_struct *target, *k++ = regs->u_regs[pos++]; reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6]; - for (; count > 0 && pos < 32; count--) { - if (get_user(*k++, ®_window[pos++])) - return -EFAULT; + if (target == current) { + for (; count > 0 && pos < 32; count--) { + if (get_user(*k++, ®_window[pos++])) + return -EFAULT; + } + } else { + for (; count > 0 && pos < 32; count--) { + if (access_process_vm(target, + (unsigned long) + ®_window[pos], + k, sizeof(*k), 0) + != sizeof(*k)) + return -EFAULT; + k++; + pos++; + } } } else { for (; count > 0 && pos < 16; count--) { @@ -423,10 +466,28 @@ static int genregs32_get(struct task_struct *target, } reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6]; - for (; count > 0 && pos < 32; count--) { - if (get_user(reg, ®_window[pos++]) || - put_user(reg, u++)) - return -EFAULT; + if (target == current) { + for (; count > 0 && pos < 32; count--) { + if (get_user(reg, ®_window[pos++]) || + put_user(reg, u++)) + return -EFAULT; + } + } else { + for (; count > 0 && pos < 32; count--) { + if (access_process_vm(target, + (unsigned long) + ®_window[pos], + ®, sizeof(reg), 0) + != sizeof(reg)) + return -EFAULT; + if (access_process_vm(target, + (unsigned long) u, + ®, sizeof(reg), 1) + != sizeof(reg)) + return -EFAULT; + pos++; + u++; + } } } while (count > 0) { @@ -488,9 +549,23 @@ static int genregs32_set(struct task_struct *target, regs->u_regs[pos++] = *k++; reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6]; - for (; count > 0 && pos < 32; count--) { - if (put_user(*k++, ®_window[pos++])) - return -EFAULT; + if (target == current) { + for (; count > 0 && pos < 32; count--) { + if (put_user(*k++, ®_window[pos++])) + return -EFAULT; + } + } else { + for (; count > 0 && pos < 32; count--) { + if (access_process_vm(target, + (unsigned long) + ®_window[pos], + (void *) k, + sizeof(*k), 1) + != sizeof(*k)) + return -EFAULT; + k++; + pos++; + } } } else { for (; count > 0 && pos < 16; count--) { @@ -500,10 +575,29 @@ static int genregs32_set(struct task_struct *target, } reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6]; - for (; count > 0 && pos < 32; count--) { - if (get_user(reg, u++) || - put_user(reg, ®_window[pos++])) - return -EFAULT; + if (target == current) { + for (; count > 0 && pos < 32; count--) { + if (get_user(reg, u++) || + put_user(reg, ®_window[pos++])) + return -EFAULT; + } + } else { + for (; count > 0 && pos < 32; count--) { + if (access_process_vm(target, + (unsigned long) + u, + ®, sizeof(reg), 0) + != sizeof(reg)) + return -EFAULT; + if (access_process_vm(target, + (unsigned long) + ®_window[pos], + ®, sizeof(reg), 1) + != sizeof(reg)) + return -EFAULT; + pos++; + u++; + } } } while (count > 0) { From a4ba7fe2a6c2b61419b290035bff398ab2591c54 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 2 Apr 2008 10:35:15 +0900 Subject: [PATCH 024/187] libata: fix IDENTIFY order in ata_bus_probe() Commit f58229f8060055b08b34008ea08f31de1e2f003c accidentally made ata_bus_probe() not use reverse order probing. Fix it. There currently isn't any PATA driver which uses obsolete ata_bus_probe() path, so this patch is mainly for correctness. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 48519887f94a..2db5c9c9ca10 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2660,7 +2660,7 @@ int ata_bus_probe(struct ata_port *ap) specific sequence bass-ackwards so that PDIAG- is released by the slave device */ - ata_link_for_each_dev(dev, &ap->link) { + ata_link_for_each_dev_reverse(dev, &ap->link) { if (tries[dev->devno]) dev->class = classes[dev->devno]; From 436d34b36202ef724778ded1e9cb10f8c37b32bc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Apr 2008 17:28:46 +0900 Subject: [PATCH 025/187] libata: uninline atapi_cmd_type() Uninline atapi_cmd_type(). It doesn't really have to be inline and more case will be added which need to access unexported libata variable. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 34 ++++++++++++++++++++++++++++++++++ include/linux/libata.h | 22 +--------------------- 2 files changed, 35 insertions(+), 21 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2db5c9c9ca10..e9b69ba489d2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -325,6 +325,39 @@ static void ata_force_horkage(struct ata_device *dev) } } +/** + * atapi_cmd_type - Determine ATAPI command type from SCSI opcode + * @opcode: SCSI opcode + * + * Determine ATAPI command type from @opcode. + * + * LOCKING: + * None. + * + * RETURNS: + * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC} + */ +int atapi_cmd_type(u8 opcode) +{ + switch (opcode) { + case GPCMD_READ_10: + case GPCMD_READ_12: + return ATAPI_READ; + + case GPCMD_WRITE_10: + case GPCMD_WRITE_12: + case GPCMD_WRITE_AND_VERIFY_10: + return ATAPI_WRITE; + + case GPCMD_READ_CD: + case GPCMD_READ_CD_MSF: + return ATAPI_READ_CD; + + default: + return ATAPI_MISC; + } +} + /** * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure * @tf: Taskfile to convert @@ -7774,6 +7807,7 @@ EXPORT_SYMBOL_GPL(ata_tf_read); EXPORT_SYMBOL_GPL(ata_noop_dev_select); EXPORT_SYMBOL_GPL(ata_std_dev_select); EXPORT_SYMBOL_GPL(sata_print_link_status); +EXPORT_SYMBOL_GPL(atapi_cmd_type); EXPORT_SYMBOL_GPL(ata_tf_to_fis); EXPORT_SYMBOL_GPL(ata_tf_from_fis); EXPORT_SYMBOL_GPL(ata_pack_xfermask); diff --git a/include/linux/libata.h b/include/linux/libata.h index b064bfeb69ee..92c64909ed25 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -849,6 +849,7 @@ extern unsigned int ata_dev_try_classify(struct ata_device *dev, int present, */ extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf); +extern int atapi_cmd_type(u8 opcode); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf); @@ -1379,27 +1380,6 @@ static inline int ata_try_flush_cache(const struct ata_device *dev) ata_id_has_flush_ext(dev->id); } -static inline int atapi_cmd_type(u8 opcode) -{ - switch (opcode) { - case GPCMD_READ_10: - case GPCMD_READ_12: - return ATAPI_READ; - - case GPCMD_WRITE_10: - case GPCMD_WRITE_12: - case GPCMD_WRITE_AND_VERIFY_10: - return ATAPI_WRITE; - - case GPCMD_READ_CD: - case GPCMD_READ_CD_MSF: - return ATAPI_READ_CD; - - default: - return ATAPI_MISC; - } -} - static inline unsigned int ac_err_mask(u8 status) { if (status & (ATA_BUSY | ATA_DRQ)) From e52dcc4899cf1b7601379c31542bd91cd2997a64 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Apr 2008 17:35:19 +0900 Subject: [PATCH 026/187] libata: ATA_12/16 doesn't fall into ATAPI_MISC SAT passthrus don't really fit into ATAPI_MISC class. SAT passthru commands always transfer multiple of 512 bytes and variable length response is not allowed. This patch creates a separate category - ATAPI_PASS_THRU - for these. This fixes HSM violation on "hdparm -I". Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 5 +++++ include/linux/libata.h | 3 ++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e9b69ba489d2..be95fdb69726 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -353,6 +353,11 @@ int atapi_cmd_type(u8 opcode) case GPCMD_READ_CD_MSF: return ATAPI_READ_CD; + case ATA_16: + case ATA_12: + if (atapi_passthru16) + return ATAPI_PASS_THRU; + /* fall thru */ default: return ATAPI_MISC; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 92c64909ed25..37ee881c42ac 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -350,7 +350,8 @@ enum { ATAPI_READ = 0, /* READs */ ATAPI_WRITE = 1, /* WRITEs */ ATAPI_READ_CD = 2, /* READ CD [MSF] */ - ATAPI_MISC = 3, /* the rest */ + ATAPI_PASS_THRU = 3, /* SAT pass-thru */ + ATAPI_MISC = 4, /* the rest */ }; enum ata_xfer_mask { From 8243e636c060fe7c10c9cf3bf53fdd2d48901525 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 3 Apr 2008 14:40:55 +0900 Subject: [PATCH 027/187] pata_ali: disable ATAPI DMA ATAPI DMA just doesn't work reliably on pata_ali. The IDE driver can do it but for some mysterious reason, pata_ali can't. This patch disables it by default and makes the driver whine during initialization. "pata_ali.atapi_dma" parameter is added so that user can bypass the workaround. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_ali.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 8786455c901d..ce830fe3a362 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -36,6 +36,10 @@ #define DRV_NAME "pata_ali" #define DRV_VERSION "0.7.5" +int ali_atapi_dma = 0; +module_param_named(atapi_dma, ali_atapi_dma, int, 0644); +MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)"); + /* * Cable special cases */ @@ -269,6 +273,27 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) } } +/** + * ali_warn_atapi_dma - Warn about ATAPI DMA disablement + * @adev: Device + * + * Whine about ATAPI DMA disablement if @adev is an ATAPI device. + * Can be used as ->dev_config. + */ + +static void ali_warn_atapi_dma(struct ata_device *adev) +{ + struct ata_eh_context *ehc = &adev->link->eh_context; + int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; + + if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) { + ata_dev_printk(adev, KERN_WARNING, + "WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled\n"); + ata_dev_printk(adev, KERN_WARNING, + "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n"); + } +} + /** * ali_lock_sectors - Keep older devices to 255 sector mode * @adev: Device @@ -283,6 +308,7 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) static void ali_lock_sectors(struct ata_device *adev) { adev->max_sectors = 255; + ali_warn_atapi_dma(adev); } /** @@ -294,6 +320,18 @@ static void ali_lock_sectors(struct ata_device *adev) static int ali_check_atapi_dma(struct ata_queued_cmd *qc) { + if (!ali_atapi_dma) { + /* FIXME: pata_ali can't do ATAPI DMA reliably but the + * IDE alim15x3 driver can. I tried lots of things + * but couldn't find what the actual difference was. + * If you got an idea, please write it to + * linux-ide@vger.kernel.org and cc htejun@gmail.com. + * + * Disable ATAPI DMA for now. + */ + return -EOPNOTSUPP; + } + /* If its not a media command, its not worth it */ if (atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC) return -EOPNOTSUPP; @@ -359,6 +397,7 @@ static struct ata_port_operations ali_20_port_ops = { .tf_load = ata_tf_load, .tf_read = ata_tf_read, + .check_atapi_dma = ali_check_atapi_dma, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, @@ -438,6 +477,7 @@ static struct ata_port_operations ali_c5_port_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, + .dev_config = ali_warn_atapi_dma, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, From 4f14bdef41e599e218d71e3d0abf339d65e9b480 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 27 Mar 2008 23:37:58 +0100 Subject: [PATCH 028/187] x86: fix nmi_watchdog=2 on Pentium-D CPUs implement nmi_watchdog=2 on this class of CPUs: cpu family : 15 model : 6 model name : Intel(R) Pentium(R) D CPU 3.00GHz the watchdog's ->setup() method is safe anyway, so if the CPU cannot support it we'll bail out safely. Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perfctr-watchdog.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index 9b838324b818..19a359472ae1 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -652,9 +652,6 @@ static void probe_nmi_watchdog(void) wd_ops = &p6_wd_ops; break; case 15: - if (boot_cpu_data.x86_model > 0x4) - return; - wd_ops = &p4_wd_ops; break; default: From 9c9b81f77330ddc003a2de2f35fa6a20410c1a62 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 27 Mar 2008 23:39:42 +0100 Subject: [PATCH 029/187] x86: print message if nmi_watchdog=2 cannot be enabled right now if there's no CPU support for nmi_watchdog=2 we'll just refuse it silently. print a useful warning. Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perfctr-watchdog.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index 19a359472ae1..b943e10ad814 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -667,8 +667,10 @@ int lapic_watchdog_init(unsigned nmi_hz) { if (!wd_ops) { probe_nmi_watchdog(); - if (!wd_ops) + if (!wd_ops) { + printk(KERN_INFO "NMI watchdog: CPU not supported\n"); return -1; + } if (!wd_ops->reserve()) { printk(KERN_ERR From bae1d2507e44417455eda76d4435352fee14cf51 Mon Sep 17 00:00:00 2001 From: Ravikiran G Thirumalai Date: Fri, 4 Apr 2008 03:06:29 -0700 Subject: [PATCH 030/187] x86: fix breakage of vSMP irq operations 25-rc* stopped working with CONFIG_X86_VSMP on vSMP machines. Looks like the vsmp irq ops got accidentally removed during merge of x86_64 pvops in 2.6.25. -- commit 6abcd98ffafbff81f0bfd7ee1d129e634af13245 removed vsmp irq ops. Tested with both CONFIG_X86_VSMP and without CONFIG_X86_VSMP, on vSMP and non vSMP x86_64 machines. Please apply. Signed-off-by: Ravikiran Thirumalai Signed-off-by: Ingo Molnar --- include/asm-x86/irqflags.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/include/asm-x86/irqflags.h b/include/asm-x86/irqflags.h index 92021c1ffa3a..0e2292483b35 100644 --- a/include/asm-x86/irqflags.h +++ b/include/asm-x86/irqflags.h @@ -70,6 +70,26 @@ static inline void raw_local_irq_restore(unsigned long flags) native_restore_fl(flags); } +#ifdef CONFIG_X86_VSMP + +/* + * Interrupt control for the VSMP architecture: + */ + +static inline void raw_local_irq_disable(void) +{ + unsigned long flags = __raw_local_save_flags(); + raw_local_irq_restore((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC); +} + +static inline void raw_local_irq_enable(void) +{ + unsigned long flags = __raw_local_save_flags(); + raw_local_irq_restore((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC)); +} + +#else + static inline void raw_local_irq_disable(void) { native_irq_disable(); @@ -80,6 +100,8 @@ static inline void raw_local_irq_enable(void) native_irq_enable(); } +#endif + /* * Used in the idle loop; sti takes one instruction cycle * to complete: @@ -137,10 +159,17 @@ static inline unsigned long __raw_local_irq_save(void) #define raw_local_irq_save(flags) \ do { (flags) = __raw_local_irq_save(); } while (0) +#ifdef CONFIG_X86_VSMP +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return !(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC); +} +#else static inline int raw_irqs_disabled_flags(unsigned long flags) { return !(flags & X86_EFLAGS_IF); } +#endif static inline int raw_irqs_disabled(void) { From bbc60c18ed17df75270da504bbd8f7bc4a52d43d Mon Sep 17 00:00:00 2001 From: Michael Abd-El-Malek Date: Fri, 4 Apr 2008 02:33:48 -0700 Subject: [PATCH 031/187] xen: fix grant table bug fix memory corruption and crash due to mis-sized grant table. A PV OS has two grant table data structures: the grant table itself and a free list. The free list is composed of an array of pages, which grow dynamically as the guest OS requires more grants. While the grant table contains 8-byte entries, the free list contains 4-byte entries. So we have half as many pages in the free list than in the grant table. There was a bug in the free list allocation code. The free list was indexed as if it was the same size as the grant table. But it's only half as large. So memory got corrupted, and I was seeing crashes in the slab allocator later on. Taken from: http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/4018c0da3360 Signed-off-by: Michael Abd-El-Malek Signed-off-by: Mark McLoughlin Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- drivers/xen/grant-table.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index ea94dbabf9a9..d85dc6d41c2a 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -381,11 +381,15 @@ EXPORT_SYMBOL_GPL(gnttab_cancel_free_callback); static int grow_gnttab_list(unsigned int more_frames) { unsigned int new_nr_grant_frames, extra_entries, i; + unsigned int nr_glist_frames, new_nr_glist_frames; new_nr_grant_frames = nr_grant_frames + more_frames; extra_entries = more_frames * GREFS_PER_GRANT_FRAME; - for (i = nr_grant_frames; i < new_nr_grant_frames; i++) { + nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + new_nr_glist_frames = + (new_nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + for (i = nr_glist_frames; i < new_nr_glist_frames; i++) { gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC); if (!gnttab_list[i]) goto grow_nomem; @@ -407,7 +411,7 @@ static int grow_gnttab_list(unsigned int more_frames) return 0; grow_nomem: - for ( ; i >= nr_grant_frames; i--) + for ( ; i >= nr_glist_frames; i--) free_page((unsigned long) gnttab_list[i]); return -ENOMEM; } @@ -530,7 +534,7 @@ static int gnttab_expand(unsigned int req_entries) static int __devinit gnttab_init(void) { int i; - unsigned int max_nr_glist_frames; + unsigned int max_nr_glist_frames, nr_glist_frames; unsigned int nr_init_grefs; if (!is_running_on_xen()) @@ -543,15 +547,15 @@ static int __devinit gnttab_init(void) * grant reference free list on the current hypervisor. */ max_nr_glist_frames = (boot_max_nr_grant_frames * - GREFS_PER_GRANT_FRAME / - (PAGE_SIZE / sizeof(grant_ref_t))); + GREFS_PER_GRANT_FRAME / RPP); gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *), GFP_KERNEL); if (gnttab_list == NULL) return -ENOMEM; - for (i = 0; i < nr_grant_frames; i++) { + nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP; + for (i = 0; i < nr_glist_frames; i++) { gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL); if (gnttab_list[i] == NULL) goto ini_nomem; From 8f59610de2fb244b5bc1a3feafd328a8d4d511d6 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 1 Apr 2008 14:24:03 +0200 Subject: [PATCH 032/187] x86, agpgart: scary messages are fortunately obsolete Fix obsolete printks in aperture-64. We used not to handle missing agpgart, but we handle it okay now. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-gart_64.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index faf3229f8fb3..700e4647dd30 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -615,8 +615,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info) nommu: /* Should not happen anymore */ - printk(KERN_ERR "PCI-DMA: More than 4GB of RAM and no IOMMU\n" - KERN_ERR "PCI-DMA: 32bit PCI IO may malfunction.\n"); + printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n" + KERN_WARNING "falling back to iommu=soft.\n"); return -1; } @@ -692,9 +692,9 @@ void __init gart_iommu_init(void) !gart_iommu_aperture || (no_agp && init_k8_gatt(&info) < 0)) { if (end_pfn > MAX_DMA32_PFN) { - printk(KERN_ERR "WARNING more than 4GB of memory " - "but GART IOMMU not available.\n" - KERN_ERR "WARNING 32bit PCI may malfunction.\n"); + printk(KERN_WARNING "More than 4GB of memory " + "but GART IOMMU not available.\n" + KERN_WARNING "falling back to iommu=soft.\n"); } return; } From f64337062c09c2c318fbcbf44ed1d739e8bc72ab Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Wed, 2 Apr 2008 15:36:36 +0100 Subject: [PATCH 033/187] xen: refactor xen_{alloc,release}_{pt,pd}() Signed-off-by: Mark McLoughlin Cc: xen-devel@lists.xensource.com Cc: Mark McLoughlin Cc: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 27 ++++++++++++++++++++------- arch/x86/xen/mmu.c | 7 ------- arch/x86/xen/mmu.h | 7 +++++++ 3 files changed, 27 insertions(+), 14 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index de4e6f05840b..16e2f8096a1a 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -667,10 +667,10 @@ static void xen_release_pt_init(u32 pfn) make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); } -static void pin_pagetable_pfn(unsigned level, unsigned long pfn) +static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn) { struct mmuext_op op; - op.cmd = level; + op.cmd = cmd; op.arg1.mfn = pfn_to_mfn(pfn); if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF)) BUG(); @@ -687,7 +687,10 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level) if (!PageHighMem(page)) { make_lowmem_page_readonly(__va(PFN_PHYS(pfn))); - pin_pagetable_pfn(level, pfn); + if (level == PT_PTE) + pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn); + else if (level == PT_PMD) + pin_pagetable_pfn(MMUEXT_PIN_L2_TABLE, pfn); } else /* make sure there are no stray mappings of this page */ @@ -697,16 +700,16 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level) static void xen_alloc_pt(struct mm_struct *mm, u32 pfn) { - xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L1_TABLE); + xen_alloc_ptpage(mm, pfn, PT_PTE); } static void xen_alloc_pd(struct mm_struct *mm, u32 pfn) { - xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L2_TABLE); + xen_alloc_ptpage(mm, pfn, PT_PMD); } /* This should never happen until we're OK to use struct page */ -static void xen_release_pt(u32 pfn) +static void xen_release_ptpage(u32 pfn, unsigned level) { struct page *page = pfn_to_page(pfn); @@ -718,6 +721,16 @@ static void xen_release_pt(u32 pfn) } } +static void xen_release_pt(u32 pfn) +{ + xen_release_ptpage(pfn, PT_PTE); +} + +static void xen_release_pd(u32 pfn) +{ + xen_release_ptpage(pfn, PT_PMD); +} + #ifdef CONFIG_HIGHPTE static void *xen_kmap_atomic_pte(struct page *page, enum km_type type) { @@ -838,7 +851,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) pv_mmu_ops.alloc_pt = xen_alloc_pt; pv_mmu_ops.alloc_pd = xen_alloc_pd; pv_mmu_ops.release_pt = xen_release_pt; - pv_mmu_ops.release_pd = xen_release_pt; + pv_mmu_ops.release_pd = xen_release_pd; pv_mmu_ops.set_pte = xen_set_pte; setup_shared_info(); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 0144395448ae..2a054ef2a3da 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -310,13 +310,6 @@ pgd_t xen_make_pgd(unsigned long pgd) } #endif /* CONFIG_X86_PAE */ -enum pt_level { - PT_PGD, - PT_PUD, - PT_PMD, - PT_PTE -}; - /* (Yet another) pagetable walker. This one is intended for pinning a pagetable. This means that it walks a pagetable and calls the diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index c9ff27f3ac3a..b5e189b1519d 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -3,6 +3,13 @@ #include #include +enum pt_level { + PT_PGD, + PT_PUD, + PT_PMD, + PT_PTE +}; + /* * Page-directory addresses above 4GB do not fit into architectural %cr3. * When accessing %cr3, or equivalent field in vcpu_guest_context, guests From a684d69d15a8fafede7c5c0daac8c646bbee805c Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Wed, 2 Apr 2008 15:36:37 +0100 Subject: [PATCH 034/187] xen: Do not pin/unpin PMD pages i.e. with this simple test case: int fd = open("/dev/zero", O_RDONLY); munmap(mmap((void *)0x40000000, 0x1000_LEN, PROT_READ, MAP_PRIVATE, fd, 0), 0x1000); close(fd); we currently get: kernel BUG at arch/x86/xen/enlighten.c:678! ... EIP is at xen_release_pt+0x79/0xa9 ... Call Trace: [] ? __pmd_free_tlb+0x1a/0x75 [] ? free_pgd_range+0x1d2/0x2b5 [] ? free_pgtables+0x7e/0x93 [] ? unmap_region+0xb9/0xf5 [] ? do_munmap+0x193/0x1f5 [] ? sys_munmap+0x30/0x3f [] ? syscall_call+0x7/0xb ======================= and xen complains: (XEN) mm.c:2241:d4 Mfn 1cc37 not pinned Further details at: https://bugzilla.redhat.com/436453 Signed-off-by: Mark McLoughlin Cc: xen-devel@lists.xensource.com Cc: Mark McLoughlin Cc: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 16e2f8096a1a..f16b056e5c56 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -689,8 +689,6 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level) make_lowmem_page_readonly(__va(PFN_PHYS(pfn))); if (level == PT_PTE) pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn); - else if (level == PT_PMD) - pin_pagetable_pfn(MMUEXT_PIN_L2_TABLE, pfn); } else /* make sure there are no stray mappings of this page */ @@ -715,7 +713,8 @@ static void xen_release_ptpage(u32 pfn, unsigned level) if (PagePinned(page)) { if (!PageHighMem(page)) { - pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn); + if (level == PT_PTE) + pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn); make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); } } From c946c7de49a9ba50bc205d6359b41bbc8f01174c Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Wed, 2 Apr 2008 15:36:38 +0100 Subject: [PATCH 035/187] xen: Clear PG_pinned in release_{pt,pd}() Signed-off-by: Mark McLoughlin Cc: xen-devel@lists.xensource.com Cc: Mark McLoughlin Cc: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f16b056e5c56..27ee26aedf94 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -717,6 +717,7 @@ static void xen_release_ptpage(u32 pfn, unsigned level) pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn); make_lowmem_page_readwrite(__va(PFN_PHYS(pfn))); } + ClearPagePinned(page); } } From 47001d603375f857a7fab0e9c095d964a1ea0039 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 1 Apr 2008 19:45:18 +0200 Subject: [PATCH 036/187] x86: tsc prevent time going backwards We already catch most of the TSC problems by sanity checks, but there is a subtle bug which has been in the code for ever. This can cause time jumps in the range of hours. This was reported in: http://lkml.org/lkml/2007/8/23/96 and http://lkml.org/lkml/2008/3/31/23 I was able to reproduce the problem with a gettimeofday loop test on a dual core and a quad core machine which both have sychronized TSCs. The TSCs seems not to be perfectly in sync though, but the kernel is not able to detect the slight delta in the sync check. Still there exists an extremly small window where this delta can be observed with a real big time jump. So far I was only able to reproduce this with the vsyscall gettimeofday implementation, but in theory this might be observable with the syscall based version as well. CPU 0 updates the clock source variables under xtime/vyscall lock and CPU1, where the TSC is slighty behind CPU0, is reading the time right after the seqlock was unlocked. The clocksource reference data was updated with the TSC from CPU0 and the value which is read from TSC on CPU1 is less than the reference data. This results in a huge delta value due to the unsigned subtraction of the TSC value and the reference value. This algorithm can not be changed due to the support of wrapping clock sources like pm timer. The huge delta is converted to nanoseconds and added to xtime, which is then observable by the caller. The next gettimeofday call on CPU1 will show the correct time again as now the TSC has advanced above the reference value. To prevent this TSC specific wreckage we need to compare the TSC value against the reference value and return the latter when it is larger than the actual TSC value. I pondered to mark the TSC unstable when the readout is smaller than the reference value, but this would render an otherwise good and fast clocksource unusable without a real good reason. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc_32.c | 15 ++++++++++++++- arch/x86/kernel/tsc_64.c | 23 ++++++++++++++++++++--- 2 files changed, 34 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index f14cfd9d1f94..d7498b34c8e9 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -287,14 +287,27 @@ core_initcall(cpufreq_tsc); /* clock source code */ static unsigned long current_tsc_khz = 0; +static struct clocksource clocksource_tsc; +/* + * We compare the TSC to the cycle_last value in the clocksource + * structure to avoid a nasty time-warp issue. This can be observed in + * a very small window right after one CPU updated cycle_last under + * xtime lock and the other CPU reads a TSC value which is smaller + * than the cycle_last reference value due to a TSC which is slighty + * behind. This delta is nowhere else observable, but in that case it + * results in a forward time jump in the range of hours due to the + * unsigned delta calculation of the time keeping core code, which is + * necessary to support wrapping clocksources like pm timer. + */ static cycle_t read_tsc(void) { cycle_t ret; rdtscll(ret); - return ret; + return ret >= clocksource_tsc.cycle_last ? + ret : clocksource_tsc.cycle_last; } static struct clocksource clocksource_tsc = { diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index 947554ddabb6..01fc9f0c39e2 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -11,6 +11,7 @@ #include #include #include +#include static int notsc __initdata = 0; @@ -290,18 +291,34 @@ int __init notsc_setup(char *s) __setup("notsc", notsc_setup); +static struct clocksource clocksource_tsc; -/* clock source code: */ +/* + * We compare the TSC to the cycle_last value in the clocksource + * structure to avoid a nasty time-warp. This can be observed in a + * very small window right after one CPU updated cycle_last under + * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which + * is smaller than the cycle_last reference value due to a TSC which + * is slighty behind. This delta is nowhere else observable, but in + * that case it results in a forward time jump in the range of hours + * due to the unsigned delta calculation of the time keeping core + * code, which is necessary to support wrapping clocksources like pm + * timer. + */ static cycle_t read_tsc(void) { cycle_t ret = (cycle_t)get_cycles(); - return ret; + + return ret >= clocksource_tsc.cycle_last ? + ret : clocksource_tsc.cycle_last; } static cycle_t __vsyscall_fn vread_tsc(void) { cycle_t ret = (cycle_t)vget_cycles(); - return ret; + + return ret >= __vsyscall_gtod_data.clock.cycle_last ? + ret : __vsyscall_gtod_data.clock.cycle_last; } static struct clocksource clocksource_tsc = { From 5761d64b277c287a7520b868c32d656ef03374b4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 4 Apr 2008 16:26:10 +0200 Subject: [PATCH 037/187] x86: revert assign IRQs to hpet timer The commits: commit 37a47db8d7f0f38dac5acf5a13abbc8f401707fa Author: Balaji Rao Date: Wed Jan 30 13:30:03 2008 +0100 x86: assign IRQs to HPET timers, fix and commit e3f37a54f690d3e64995ea7ecea08c5ab3070faf Author: Balaji Rao Date: Wed Jan 30 13:30:03 2008 +0100 x86: assign IRQs to HPET timers have been identified to cause a regression on some platforms due to the assignement of legacy IRQs which makes the legacy devices connected to those IRQs disfunctional. Revert them. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=10382 Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/hpet.c | 9 ++++--- drivers/char/hpet.c | 53 +++++++----------------------------------- include/linux/hpet.h | 2 +- 3 files changed, 15 insertions(+), 49 deletions(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 235fd6c77504..36652ea1a265 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -133,13 +133,16 @@ static void hpet_reserve_platform_timers(unsigned long id) #ifdef CONFIG_HPET_EMULATE_RTC hpet_reserve_timer(&hd, 1); #endif + hd.hd_irq[0] = HPET_LEGACY_8254; hd.hd_irq[1] = HPET_LEGACY_RTC; - for (i = 2; i < nrtimers; timer++, i++) - hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> - Tn_INT_ROUTE_CNF_SHIFT; + for (i = 2; i < nrtimers; timer++, i++) + hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >> + Tn_INT_ROUTE_CNF_SHIFT; + hpet_alloc(&hd); + } #else static void hpet_reserve_platform_timers(unsigned long id) { } diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 465ad35ed38f..1399971be689 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -731,14 +731,14 @@ static unsigned long hpet_calibrate(struct hpets *hpetp) int hpet_alloc(struct hpet_data *hdp) { - u64 cap, mcfg, hpet_config; + u64 cap, mcfg; struct hpet_dev *devp; - u32 i, ntimer, irq; + u32 i, ntimer; struct hpets *hpetp; size_t siz; struct hpet __iomem *hpet; static struct hpets *last = NULL; - unsigned long period, irq_bitmap; + unsigned long period; unsigned long long temp; /* @@ -765,48 +765,12 @@ int hpet_alloc(struct hpet_data *hdp) hpetp->hp_hpet_phys = hdp->hd_phys_address; hpetp->hp_ntimer = hdp->hd_nirqs; + + for (i = 0; i < hdp->hd_nirqs; i++) + hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i]; + hpet = hpetp->hp_hpet; - /* Assign IRQs statically for legacy devices */ - hpetp->hp_dev[0].hd_hdwirq = hdp->hd_irq[0]; - hpetp->hp_dev[1].hd_hdwirq = hdp->hd_irq[1]; - - /* Assign IRQs dynamically for the others */ - for (i = 2, devp = &hpetp->hp_dev[2]; i < hdp->hd_nirqs; i++, devp++) { - struct hpet_timer __iomem *timer; - - timer = &hpet->hpet_timers[devp - hpetp->hp_dev]; - - /* Check if there's already an IRQ assigned to the timer */ - if (hdp->hd_irq[i]) { - hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i]; - continue; - } - - hpet_config = readq(&timer->hpet_config); - irq_bitmap = (hpet_config & Tn_INT_ROUTE_CAP_MASK) - >> Tn_INT_ROUTE_CAP_SHIFT; - if (!irq_bitmap) - irq = 0; /* No valid IRQ Assignable */ - else { - irq = find_first_bit(&irq_bitmap, 32); - do { - hpet_config |= irq << Tn_INT_ROUTE_CNF_SHIFT; - writeq(hpet_config, &timer->hpet_config); - - /* - * Verify whether we have written a valid - * IRQ number by reading it back again - */ - hpet_config = readq(&timer->hpet_config); - if (irq == (hpet_config & Tn_INT_ROUTE_CNF_MASK) - >> Tn_INT_ROUTE_CNF_SHIFT) - break; /* Success */ - } while ((irq = (find_next_bit(&irq_bitmap, 32, irq)))); - } - hpetp->hp_dev[i].hd_hdwirq = irq; - } - cap = readq(&hpet->hpet_cap); ntimer = ((cap & HPET_NUM_TIM_CAP_MASK) >> HPET_NUM_TIM_CAP_SHIFT) + 1; @@ -836,8 +800,7 @@ int hpet_alloc(struct hpet_data *hdp) hpetp->hp_which, hdp->hd_phys_address, hpetp->hp_ntimer > 1 ? "s" : ""); for (i = 0; i < hpetp->hp_ntimer; i++) - printk("%s %d", i > 0 ? "," : "", - hpetp->hp_dev[i].hd_hdwirq); + printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]); printk("\n"); printk(KERN_INFO "hpet%u: %u %d-bit timers, %Lu Hz\n", diff --git a/include/linux/hpet.h b/include/linux/hpet.h index 9cd94bfd07e5..2dc29ce6c8e4 100644 --- a/include/linux/hpet.h +++ b/include/linux/hpet.h @@ -64,7 +64,7 @@ struct hpet { */ #define Tn_INT_ROUTE_CAP_MASK (0xffffffff00000000ULL) -#define Tn_INT_ROUTE_CAP_SHIFT (32UL) +#define Tn_INI_ROUTE_CAP_SHIFT (32UL) #define Tn_FSB_INT_DELCAP_MASK (0x8000UL) #define Tn_FSB_INT_DELCAP_SHIFT (15) #define Tn_FSB_EN_CNF_MASK (0x4000UL) From 4ed919014eb2b591eb8fdd4dd00226a65faddef4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 4 Apr 2008 14:30:31 -0700 Subject: [PATCH 038/187] parport_pc: make sure to release IO ports after probing for IT87XX Commit f63fd7e299ee13da071ecfce2b90b58c5e1562b1 ("parport_pc: detection for SuperIO IT87XX POST") only released the IO port region on success, not when the probe for the IT87XX chip failed. That caused not only a reserved region to leak, but also caused an oops when the driver module was unloaded and somebody tried to cat /proc/ioports - because the string that was assigned to the IO port region was a static string in the module virtual address area. Reported-by: Lubos Lunak Cc: Jan Kara Cc: Petr Cvek Acked-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/parport_pc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index d76d37bcb9cc..a85808938205 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -1568,9 +1568,8 @@ static void __devinit detect_and_report_it87(void) outb(r | 8, 0x2F); outb(0x02, 0x2E); /* Lock */ outb(0x02, 0x2F); - - release_region(0x2e, 1); } + release_region(0x2e, 1); } #endif /* CONFIG_PARPORT_PC_SUPERIO */ From 1be62dc190ebaca331038962c873e7967de6cc4b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 4 Apr 2008 14:38:17 -0700 Subject: [PATCH 039/187] Be more careful about marking buffers dirty Mikulas Patocka noted that the optimization where we check if a buffer was already dirty (and we avoid re-dirtying it) was not really SMP-safe. Since the read of the old status was not synchronized with anything, an aggressive CPU re-ordering of memory accesses might have moved that read up to before the data was even written to the buffer, and another CPU that cleaned it again, causing the newly dirty state to never actually hit the disk. Admittedly this would probably never trigger in practice, but it's still wrong. Mikulas sent a patch that fixed the problem, but I dislike the subtlety of the whole optimization, so this is an alternate fix that is more explicit about the particular SMP ordering for the optimization, and separates out the speculative reads of the buffer state into its own conditional (and makes the memory barrier only happen if we are likely to actually hit the optimized case in the first place). I considered removing the optimization entirely, but Andrew argued for it's continued existence. I'm a push-over. Cc: Mikulas Patocka Cc: Andrew Morton Signed-off-by: Linus Torvalds --- fs/buffer.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/fs/buffer.c b/fs/buffer.c index 98196327ddf0..39ff14403d13 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1181,7 +1181,20 @@ __getblk_slow(struct block_device *bdev, sector_t block, int size) void mark_buffer_dirty(struct buffer_head *bh) { WARN_ON_ONCE(!buffer_uptodate(bh)); - if (!buffer_dirty(bh) && !test_set_buffer_dirty(bh)) + + /* + * Very *carefully* optimize the it-is-already-dirty case. + * + * Don't let the final "is it dirty" escape to before we + * perhaps modified the buffer. + */ + if (buffer_dirty(bh)) { + smp_mb(); + if (buffer_dirty(bh)) + return; + } + + if (!test_set_buffer_dirty(bh)) __set_page_dirty(bh->b_page, page_mapping(bh->b_page), 0); } From ef85ecbf1179157e765f42c7545bc32b56ce3cb4 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 4 Apr 2008 14:57:38 +0200 Subject: [PATCH 040/187] m68k: use KBUILD_DEFCONFIG The default defconfig should be one from arch/m68k/configs/ arch/m68k/defconfig was not exactly identical to amiga_defconfig but also considering how long they have been without any update that doesn't seem to have been on purpose. Signed-off-by: Adrian Bunk Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/m68k/Makefile | 2 + arch/m68k/defconfig | 657 -------------------------------------------- 2 files changed, 2 insertions(+), 657 deletions(-) delete mode 100644 arch/m68k/defconfig diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index 2cba605cb59d..b15173f28a23 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -13,6 +13,8 @@ # Copyright (C) 1994 by Hamish Macdonald # +KBUILD_DEFCONFIG := amiga_defconfig + # override top level makefile AS += -m68020 LDFLAGS := -m m68kelf diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig deleted file mode 100644 index 7d935e48a9a8..000000000000 --- a/arch/m68k/defconfig +++ /dev/null @@ -1,657 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:17 2005 -# -CONFIG_M68K=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Platform dependent setup -# -# CONFIG_SUN3 is not set -CONFIG_AMIGA=y -# CONFIG_ATARI is not set -# CONFIG_MAC is not set -# CONFIG_APOLLO is not set -# CONFIG_VME is not set -# CONFIG_HP300 is not set -# CONFIG_SUN3X is not set -# CONFIG_Q40 is not set - -# -# Processor type -# -CONFIG_M68020=y -CONFIG_M68030=y -CONFIG_M68040=y -# CONFIG_M68060 is not set -CONFIG_MMU_MOTOROLA=y -# CONFIG_M68KFPU_EMU is not set -# CONFIG_ADVANCED is not set - -# -# General setup -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -CONFIG_ZORRO=y -# CONFIG_AMIGA_PCMCIA is not set -# CONFIG_HEARTBEAT is not set -CONFIG_PROC_HARDWARE=y -# CONFIG_ZORRO_NAMES is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -CONFIG_AMIGA_FLOPPY=y -# CONFIG_AMIGA_Z2RAM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=y -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -# CONFIG_CHR_DEV_SG is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set -CONFIG_A3000_SCSI=y -CONFIG_A2091_SCSI=y -CONFIG_GVP11_SCSI=y -# CONFIG_CYBERSTORM_SCSI is not set -# CONFIG_CYBERSTORMII_SCSI is not set -# CONFIG_BLZ2060_SCSI is not set -# CONFIG_BLZ1230_SCSI is not set -# CONFIG_FASTLANE_SCSI is not set -# CONFIG_OKTAGON_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_AMIGA is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_AMIGA is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_A2232 is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -CONFIG_FB_AMIGA=y -CONFIG_FB_AMIGA_OCS=y -CONFIG_FB_AMIGA_ECS=y -CONFIG_FB_AMIGA_AGA=y -# CONFIG_FB_FM2 is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# Character devices -# -CONFIG_AMIGA_BUILTIN_SERIAL=y -# CONFIG_MULTIFACE_III_TTY is not set -# CONFIG_GVPIOEXT is not set -# CONFIG_SERIAL_CONSOLE is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -# CONFIG_VFAT_FS is not set -CONFIG_FAT_DEFAULT_CODEPAGE=437 -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_AMIGA_PARTITION=y -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set From a1aa758d0019f2ac4ea558b3987a07c12fa19f61 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 4 Apr 2008 14:58:42 +0200 Subject: [PATCH 041/187] m68k: update defconfigs for 2.6.25 Long overdue update of the m68k defconfigs Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/m68k/configs/amiga_defconfig | 1011 +++++++++++++++----------- arch/m68k/configs/apollo_defconfig | 891 ++++++++++++++--------- arch/m68k/configs/atari_defconfig | 973 ++++++++++++++----------- arch/m68k/configs/bvme6000_defconfig | 851 +++++++++++++--------- arch/m68k/configs/hp300_defconfig | 903 ++++++++++++++--------- arch/m68k/configs/mac_defconfig | 1000 ++++++++++++++----------- arch/m68k/configs/mvme147_defconfig | 878 ++++++++++++---------- arch/m68k/configs/mvme16x_defconfig | 879 ++++++++++++---------- arch/m68k/configs/q40_defconfig | 1001 ++++++++++++++----------- arch/m68k/configs/sun3_defconfig | 884 ++++++++++++---------- arch/m68k/configs/sun3x_defconfig | 886 ++++++++++++---------- 11 files changed, 5872 insertions(+), 4285 deletions(-) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 5649fbae430e..e41958371367 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:23 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:06 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-amiga" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -80,10 +128,24 @@ CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y CONFIG_MMU_MOTOROLA=y -CONFIG_M68KFPU_EMU=y -CONFIG_M68KFPU_EMU_EXTRAPREC=y -# CONFIG_M68KFPU_EMU_ONLY is not set +# CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -97,8 +159,262 @@ CONFIG_AMIGA_PCMCIA=y CONFIG_PROC_HARDWARE=y CONFIG_ISA=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ZORRO_NAMES=y +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +CONFIG_ATALK=m +# CONFIG_DEV_APPLETALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + # # Device Drivers # @@ -106,38 +422,25 @@ CONFIG_ZORRO_NAMES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m # CONFIG_MTD is not set - -# -# Parallel port support -# CONFIG_PARPORT=m # CONFIG_PARPORT_PC is not set -CONFIG_PARPORT_NOT_PC=y CONFIG_PARPORT_AMIGA=m CONFIG_PARPORT_MFC3=m # CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y - -# -# Plug and Play support -# +CONFIG_PARPORT_NOT_PC=y # CONFIG_PNP is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y CONFIG_AMIGA_FLOPPY=y CONFIG_AMIGA_Z2RAM=y -# CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m @@ -145,56 +448,66 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +# CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y -# CONFIG_IDE_CHIPSETS is not set + +# +# Other IDE chipsets support +# + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_UMC8672 is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set +# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # +CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -206,6 +519,7 @@ CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -213,30 +527,34 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set +CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set @@ -244,243 +562,42 @@ CONFIG_SCSI_CONSTANTS=y CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y -CONFIG_CYBERSTORM_SCSI=y -CONFIG_CYBERSTORMII_SCSI=y -CONFIG_BLZ2060_SCSI=y -CONFIG_BLZ1230_SCSI=y -CONFIG_FASTLANE_SCSI=y -CONFIG_OKTAGON_SCSI=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# +CONFIG_SCSI_A4000T=y +CONFIG_SCSI_ZORRO7XX=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -CONFIG_IPV6_PRIVACY=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -# CONFIG_DEV_APPLETALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# ARCnet devices -# +CONFIG_VETH=m # CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set CONFIG_ARIADNE=m CONFIG_A2065=m CONFIG_HYDRA=m @@ -493,32 +610,24 @@ CONFIG_APNE=m # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set +# CONFIG_B44 is not set # CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set -CONFIG_PLIP=m +# CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set CONFIG_PPP_FILTER=y @@ -526,28 +635,28 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -557,7 +666,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -570,6 +678,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_AMIGA=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set @@ -577,7 +686,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set -CONFIG_MOUSE_AMIGA=y +CONFIG_MOUSE_AMIGA=m # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set @@ -603,16 +712,16 @@ CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_TURBOGRAFX is not set CONFIG_JOYSTICK_AMIGA=m # CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_M68K_BEEP=m +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -621,6 +730,7 @@ CONFIG_SERIO_SERPORT=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_A2232=m @@ -638,94 +748,102 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_CIRRUS=m + +# +# Frame buffer hardware drivers +# +CONFIG_FB_CIRRUS=y CONFIG_FB_AMIGA=y CONFIG_FB_AMIGA_OCS=y CONFIG_FB_AMIGA_ECS=y CONFIG_FB_AMIGA_AGA=y CONFIG_FB_FM2=y +# CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_FONT_PEARL_8x8=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -733,27 +851,21 @@ CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m CONFIG_DMASOUND_PAULA=m CONFIG_DMASOUND=m - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_AUXDISPLAY is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -768,10 +880,11 @@ CONFIG_MULTIFACE_III_TTY=m # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -782,25 +895,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -808,7 +925,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -827,19 +943,18 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set -CONFIG_AFFS_FS=y +CONFIG_AFFS_FS=m CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m # CONFIG_BEFS_FS is not set @@ -847,43 +962,39 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -894,10 +1005,6 @@ CONFIG_CODA_FS=m # CONFIG_PARTITION_ADVANCED is not set CONFIG_AMIGA_PARTITION=y CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -938,35 +1045,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m @@ -975,9 +1089,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -986,20 +1112,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 63024b0b7ac3..e61196cd7fa5 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:27 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:07 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-apollo" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -80,10 +128,24 @@ CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y CONFIG_MMU_MOTOROLA=y -CONFIG_M68KFPU_EMU=y -CONFIG_M68KFPU_EMU_EXTRAPREC=y -# CONFIG_M68KFPU_EMU_ONLY is not set +# CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -93,134 +155,11 @@ CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -230,10 +169,17 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -245,145 +191,199 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # -# SCTP Configuration (EXPERIMENTAL) +# DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set +# CONFIG_IPX is not set CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -391,46 +391,154 @@ CONFIG_NET_CLS_ROUTE=y # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_SCSI_DEBUG is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_VETH=m +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set CONFIG_APOLLO_ELPLUS=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -439,28 +547,28 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -470,7 +578,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -483,11 +590,19 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -495,7 +610,7 @@ CONFIG_MOUSE_SERIAL=m # Hardware I/O ports # CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -506,6 +621,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -519,90 +635,114 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_GEN_RTC=y +# CONFIG_HW_RANDOM is not set +CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +# CONFIG_FB_CFB_COPYAREA is not set +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_APOLLO=y +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -615,10 +755,11 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -629,25 +770,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -655,7 +800,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -674,13 +818,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -694,44 +837,40 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -741,10 +880,6 @@ CONFIG_CODA_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -785,35 +920,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -822,9 +964,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -833,20 +987,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 6433da2d2ce2..ba7f971bb026 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:32 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:09 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-atari" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -80,10 +128,24 @@ CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y CONFIG_MMU_MOTOROLA=y -CONFIG_M68KFPU_EMU=y -CONFIG_M68KFPU_EMU_EXTRAPREC=y -# CONFIG_M68KFPU_EMU_ONLY is not set +# CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -94,166 +156,11 @@ CONFIG_BINFMT_MISC=m CONFIG_STRAM_PROC=y CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -# CONFIG_PARPORT_PC is not set -CONFIG_PARPORT_NOT_PC=y -CONFIG_PARPORT_ATARI=m -# CONFIG_PARPORT_GSC is not set -CONFIG_PARPORT_1284=y - -# -# Plug and Play support -# - -# -# Block devices -# -CONFIG_ATARI_FLOPPY=y -# CONFIG_PARIDE is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_FALCON_IDE=y -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -263,10 +170,17 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m @@ -275,145 +189,199 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # -# SCTP Configuration (EXPERIMENTAL) +# DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set +# CONFIG_IPX is not set CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -421,46 +389,189 @@ CONFIG_NET_CLS_ROUTE=y # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -CONFIG_EQUALIZER=m -# CONFIG_TUN is not set +# CONFIG_AF_RXRPC is not set # -# Ethernet (10 or 100Mbit) +# Wireless # +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +CONFIG_PARPORT=m +CONFIG_PARPORT_ATARI=m +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_BLK_DEV=y +CONFIG_ATARI_FLOPPY=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_BLK_DEV_IDEFLOPPY=m +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_FALCON_IDE=y +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_SCSI_DEBUG is not set +CONFIG_ATARI_SCSI=y +# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set +# CONFIG_ATARI_SCSI_RESET_BOOT is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +CONFIG_MACVLAN=m +CONFIG_EQUALIZER=m +# CONFIG_TUN is not set +CONFIG_VETH=m +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_ATARILANCE=m +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NET_POCKET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -470,28 +581,28 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -501,7 +612,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -509,26 +619,37 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_ATARI_KBD_CORE=y +CONFIG_KEYBOARD_ATARI=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set +CONFIG_MOUSE_ATARI=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set @@ -540,6 +661,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -556,86 +678,97 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=y +CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_ATY is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_ATARI=y +# CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_ATY is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -643,27 +776,21 @@ CONFIG_FONT_8x16=y CONFIG_SOUND=m CONFIG_DMASOUND_ATARI=m CONFIG_DMASOUND=m - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_AUXDISPLAY is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -680,38 +807,44 @@ CONFIG_ATARI_DSP56K=m # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set -CONFIG_REISERFS_PROC_INFO=y +# CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=m # CONFIG_JFS_POSIX_ACL is not set # CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set - -# -# XFS support -# +CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -719,7 +852,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -738,13 +870,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -758,42 +889,38 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +CONFIG_SUNRPC_BIND34=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -804,10 +931,6 @@ CONFIG_CODA_FS=m # CONFIG_PARTITION_ADVANCED is not set CONFIG_ATARI_PARTITION=y CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -848,35 +971,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m @@ -885,9 +1015,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -896,20 +1038,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index da2a23a21463..ed98eff708c4 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:37 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:10 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-bvme6000" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -85,6 +133,22 @@ CONFIG_M68060=y CONFIG_MMU_MOTOROLA=y # CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -93,134 +157,11 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -230,10 +171,17 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -245,126 +193,186 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # -# SCTP Configuration (EXPERIMENTAL) +# DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set @@ -376,13 +384,8 @@ CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -390,76 +393,186 @@ CONFIG_NET_CLS_ROUTE=y # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_53C700_BE_BUS=y +# CONFIG_SCSI_DEBUG is not set +CONFIG_BVME6000_SCSI=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_VETH=m +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set CONFIG_BVME6000_NET=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set +CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -469,7 +582,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -482,11 +594,19 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -494,7 +614,7 @@ CONFIG_MOUSE_SERIAL=m # Hardware I/O ports # CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -505,6 +625,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -518,59 +639,56 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -581,27 +699,20 @@ CONFIG_DUMMY_CONSOLE=y # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -614,10 +725,11 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -628,25 +740,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -654,7 +770,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -673,13 +788,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -693,44 +807,40 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -740,10 +850,7 @@ CONFIG_CODA_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_SYSV68_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -784,35 +891,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -821,9 +935,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -832,20 +958,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=m CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=m +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 51251883adf8..38b68c70e567 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:41 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:12 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-hp300" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -81,10 +129,24 @@ CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y CONFIG_MMU_MOTOROLA=y -CONFIG_M68KFPU_EMU=y -CONFIG_M68KFPU_EMU_EXTRAPREC=y -# CONFIG_M68KFPU_EMU_ONLY is not set +# CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -94,134 +156,11 @@ CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -231,10 +170,17 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -246,145 +192,199 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # -# SCTP Configuration (EXPERIMENTAL) +# DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set +# CONFIG_IPX is not set CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -392,46 +392,154 @@ CONFIG_NET_CLS_ROUTE=y # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_SCSI_DEBUG is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_VETH=m +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set CONFIG_HPLANCE=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -440,28 +548,28 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -471,7 +579,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -484,19 +591,35 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_HIL_OLD=y +CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set +CONFIG_MOUSE_HIL=m # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_M68K_BEEP is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_HP_SDC_RTC=m # # Hardware I/O ports # -CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_HP_SDC=y +CONFIG_HIL_MLC=y CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -507,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -520,90 +644,114 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_GEN_RTC=y +# CONFIG_HW_RANDOM is not set +CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FB is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +# CONFIG_FB_CFB_COPYAREA is not set +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_HP300=y +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -614,10 +762,11 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -628,25 +777,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -654,7 +807,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -673,13 +825,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -693,44 +844,40 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -740,10 +887,6 @@ CONFIG_CODA_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -784,35 +927,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -821,9 +971,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -832,20 +994,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index ff9dffa5b860..738bca695a88 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:45 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:14 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-mac" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -82,10 +130,24 @@ CONFIG_M68030=y CONFIG_M68040=y # CONFIG_M68060 is not set CONFIG_MMU_MOTOROLA=y -CONFIG_M68KFPU_EMU=y -CONFIG_M68KFPU_EMU_EXTRAPREC=y -# CONFIG_M68KFPU_EMU_ONLY is not set +# CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -95,6 +157,263 @@ CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # CONFIG_HEARTBEAT is not set CONFIG_PROC_HARDWARE=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -103,28 +422,15 @@ CONFIG_PROC_HARDWARE=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m @@ -132,53 +438,50 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +# CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_MAC_IDE=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set +# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # +CONFIG_RAID_ATTRS=m CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -190,6 +493,7 @@ CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -197,58 +501,48 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set CONFIG_MAC_SCSI=y -CONFIG_SCSI_MAC_ESP=y - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Macintosh device drivers -# +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y +CONFIG_MACINTOSH_DRIVERS=y CONFIG_ADB=y CONFIG_ADB_MACII=y CONFIG_ADB_MACIISI=y @@ -257,253 +551,65 @@ CONFIG_ADB_PMU68K=y CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -CONFIG_IPV6_PRIVACY=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m -CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_VETH=m +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MAC8390=y -CONFIG_MAC89x0=y -CONFIG_MACSONIC=y +CONFIG_MAC89x0=m +CONFIG_MACSONIC=m CONFIG_MACMACE=y # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set CONFIG_PPP_FILTER=y -# CONFIG_PPP_ASYNC is not set -# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -513,7 +619,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -526,19 +631,29 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_M68K_BEEP=m +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -549,6 +664,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -562,116 +678,117 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_VALKYRIE=y CONFIG_FB_MAC=y +# CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_FONT_6x11=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_MAC_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -685,10 +802,11 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -699,25 +817,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -725,7 +847,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -744,13 +865,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -764,43 +884,39 @@ CONFIG_HFSPLUS_FS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -808,27 +924,9 @@ CONFIG_CODA_FS=m # # Partition Types # -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -CONFIG_AMIGA_PARTITION=y -CONFIG_ATARI_PARTITION=y +# CONFIG_PARTITION_ADVANCED is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -869,46 +967,65 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=y +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -917,20 +1034,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index f0d5534f6830..f40b1724254b 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:50 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:17 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-mvme147" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -85,6 +133,22 @@ CONFIG_M68030=y CONFIG_MMU_MOTOROLA=y # CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -93,135 +157,11 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set -CONFIG_MVME147_SCSI=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -231,10 +171,17 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -246,145 +193,199 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # -# SCTP Configuration (EXPERIMENTAL) +# DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set +# CONFIG_IPX is not set CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -392,46 +393,155 @@ CONFIG_NET_CLS_ROUTE=y # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_SCSI_DEBUG is not set +CONFIG_MVME147_SCSI=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_VETH=m +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set CONFIG_MVME147_NET=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -440,28 +550,28 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -471,7 +581,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -484,11 +593,19 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -496,7 +613,7 @@ CONFIG_MOUSE_SERIAL=m # Hardware I/O ports # CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -507,6 +624,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -520,112 +638,80 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set -# CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -638,10 +724,11 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -652,25 +739,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -678,7 +769,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -697,15 +787,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -719,44 +806,40 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -766,10 +849,7 @@ CONFIG_CODA_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_SYSV68_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -810,35 +890,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -847,9 +934,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -858,20 +957,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 1d5c46ff3c81..e9ccc774334e 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:53 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:19 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-mvme16x" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -85,6 +133,22 @@ CONFIG_M68060=y CONFIG_MMU_MOTOROLA=y # CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -93,134 +157,11 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -230,10 +171,17 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -245,145 +193,199 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -CONFIG_XFRM_USER=m +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # -# SCTP Configuration (EXPERIMENTAL) +# DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set +# CONFIG_IPX is not set CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -391,46 +393,156 @@ CONFIG_NET_CLS_ROUTE=y # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_53C700_BE_BUS=y +# CONFIG_SCSI_DEBUG is not set +CONFIG_MVME16x_SCSI=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_VETH=m +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set CONFIG_MVME16x_NET=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -439,28 +551,28 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -470,7 +582,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -483,11 +594,19 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -495,7 +614,7 @@ CONFIG_MOUSE_SERIAL=m # Hardware I/O ports # CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -506,6 +625,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -519,116 +639,85 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set -# CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices # +CONFIG_SERIAL167=y CONFIG_MVME162_SCC=y CONFIG_SERIAL_CONSOLE=y @@ -637,10 +726,11 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -651,25 +741,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -677,7 +771,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -696,15 +789,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -718,44 +808,40 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set - -# -# Network File Systems -# +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -765,10 +851,7 @@ CONFIG_CODA_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_SYSV68_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -809,35 +892,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -846,9 +936,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -857,20 +959,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 856238634d42..165658fe73eb 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,63 +1,112 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:34:58 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:20 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-q40" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -80,10 +129,24 @@ CONFIG_Q40=y CONFIG_M68040=y CONFIG_M68060=y CONFIG_MMU_MOTOROLA=y -CONFIG_M68KFPU_EMU=y -CONFIG_M68KFPU_EMU_EXTRAPREC=y -# CONFIG_M68KFPU_EMU_ONLY is not set +# CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -91,182 +154,15 @@ CONFIG_M68KFPU_EMU_EXTRAPREC=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -# CONFIG_HEARTBEAT is not set +CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ISA=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_Q40IDE=y -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -276,14 +172,18 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set @@ -291,145 +191,199 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # -# SCTP Configuration (EXPERIMENTAL) +# DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set +# CONFIG_IPX is not set CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -437,29 +391,195 @@ CONFIG_NET_CLS_ROUTE=y # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_PNP is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_BLK_DEV_IDEFLOPPY=m +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_Q40IDE=y + +# +# Other IDE chipsets support +# + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_QD65XX is not set +# CONFIG_BLK_DEV_UMC8672 is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_DEBUG is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# ARCnet devices -# +CONFIG_VETH=m # CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -468,30 +588,21 @@ CONFIG_MII=m # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NE2000=m +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -500,28 +611,28 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -531,7 +642,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -544,22 +654,32 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_M68K_BEEP=m +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=m -CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_Q40KBD=m CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set @@ -571,6 +691,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -584,115 +705,117 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# CONFIG_FB_Q40=y +# CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # -CONFIG_SOUND=y -CONFIG_DMASOUND_Q40=y -CONFIG_DMASOUND=y - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_SOUND=m +CONFIG_DMASOUND_Q40=m +CONFIG_DMASOUND=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -703,10 +826,11 @@ CONFIG_DMASOUND=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -717,25 +841,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -743,7 +871,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -762,13 +889,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -782,44 +908,39 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -CONFIG_UFS_FS_WRITE=y - -# -# Network File Systems -# +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -829,10 +950,6 @@ CONFIG_CODA_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -873,35 +990,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -910,9 +1034,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -921,20 +1057,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index af903b5c5708..bd2b9c4927c4 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:35:02 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:22 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +CONFIG_NO_DMA=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-sun3" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -69,10 +117,24 @@ CONFIG_SUN3=y # CONFIG_M68020=y CONFIG_MMU_SUN3=y -CONFIG_M68KFPU_EMU=y -CONFIG_M68KFPU_EMU_EXTRAPREC=y -# CONFIG_M68KFPU_EMU_ONLY is not set +# CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_SINGLE_MEMORY_CHUNK=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -81,134 +143,11 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -218,10 +157,17 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -233,145 +179,199 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # -# SCTP Configuration (EXPERIMENTAL) +# DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set +# CONFIG_IPX is not set CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -379,47 +379,156 @@ CONFIG_NET_CLS_ROUTE=y # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +# CONFIG_SCSI_DMA is not set +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_SCSI_DEBUG is not set +CONFIG_SUN3_SCSI=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_VETH=m +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set CONFIG_SUN3LANCE=y CONFIG_SUN3_82586=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -428,28 +537,28 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -459,7 +568,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -472,11 +580,19 @@ CONFIG_KEYBOARD_SUNKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -484,7 +600,7 @@ CONFIG_MOUSE_SERIAL=m # Hardware I/O ports # CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -495,6 +611,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -508,112 +625,113 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_GEN_RTC=y +# CONFIG_HW_RANDOM is not set +CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -624,10 +742,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -638,25 +757,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -664,7 +787,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -683,15 +805,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -705,44 +824,40 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -CONFIG_UFS_FS_WRITE=y - -# -# Network File Systems -# +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -753,10 +868,6 @@ CONFIG_CODA_FS=m # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SUN_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -797,35 +908,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -834,9 +952,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -845,20 +975,34 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 997143b7928a..f18154f1ef1f 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,63 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6-m68k -# Tue Jun 7 20:35:06 2005 +# Linux kernel version: 2.6.25-rc8 +# Wed Apr 2 20:46:23 2008 # CONFIG_M68K=y CONFIG_MMU=y -CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_IOMAP=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_DMA is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_HZ=100 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="-sun3x" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +CONFIG_BLK_DEV_BSG=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform dependent setup @@ -80,10 +128,24 @@ CONFIG_M68030=y # CONFIG_M68040 is not set # CONFIG_M68060 is not set CONFIG_MMU_MOTOROLA=y -CONFIG_M68KFPU_EMU=y -CONFIG_M68KFPU_EMU_EXTRAPREC=y -# CONFIG_M68KFPU_EMU_ONLY is not set +# CONFIG_M68KFPU_EMU is not set # CONFIG_ADVANCED is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_NODES_SHIFT=3 +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y # # General setup @@ -92,135 +154,11 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y +CONFIG_ZONE_DMA=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_ATA_OVER_ETH=m - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_DEBUG is not set -CONFIG_SUN3X_ESP=y - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -# CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -# CONFIG_MD_FAULTY is not set -CONFIG_BLK_DEV_DM=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support +# Networking # CONFIG_NET=y @@ -230,10 +168,17 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y @@ -245,145 +190,199 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_IP_TCPDIAG=m -CONFIG_IP_TCPDIAG_IPV6=y - -# -# IP: Virtual Server Configuration -# +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +# CONFIG_NF_CONNTRACK_EVENTS is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -CONFIG_IP_NF_CONNTRACK_MARK=y -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # +CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_MARK=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m +CONFIG_IP_DCCP_ACKVEC=y # -# SCTP Configuration (EXPERIMENTAL) +# DCCP CCIDs Configuration (EXPERIMENTAL) # +CONFIG_IP_DCCP_CCID2=m +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=m +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=m CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set +# CONFIG_IPX is not set CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -391,46 +390,155 @@ CONFIG_NET_CLS_ROUTE=y # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_SCSI_DEBUG is not set +CONFIG_SUN3X_ESP=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m +CONFIG_DM_MULTIPATH_RDAC=m +CONFIG_DM_MULTIPATH_HP=m +# CONFIG_DM_DELAY is not set +CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set +CONFIG_MACVLAN=m CONFIG_EQUALIZER=m # CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# +CONFIG_VETH=m +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +# CONFIG_MII is not set CONFIG_SUN3LANCE=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -439,28 +547,28 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_SHAPER=m CONFIG_NETCONSOLE=m - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -470,7 +578,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -483,11 +590,19 @@ CONFIG_KEYBOARD_SUNKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -495,7 +610,7 @@ CONFIG_MOUSE_SERIAL=m # Hardware I/O ports # CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -506,6 +621,7 @@ CONFIG_SERIO_LIBPS2=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -519,112 +635,113 @@ CONFIG_HW_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_GEN_RTC=y +# CONFIG_HW_RANDOM is not set +CONFIG_GEN_RTC=m CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# +# CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # -# Dallas's 1-wire bus +# SPI support # +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set -CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# InfiniBand support +# Userspace I/O # -# CONFIG_INFINIBAND is not set +# CONFIG_UIO is not set # # Character devices @@ -635,10 +752,11 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -649,25 +767,29 @@ CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +# CONFIG_XFS_RT is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_NOLOCK=m +CONFIG_GFS2_FS_LOCKING_DLM=m +CONFIG_OCFS2_FS=m +# CONFIG_OCFS2_DEBUG_MASKLOG is not set +# CONFIG_OCFS2_DEBUG_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -675,7 +797,6 @@ CONFIG_AUTOFS4_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -694,15 +815,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -716,44 +834,40 @@ CONFIG_HFSPLUS_FS=m # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -CONFIG_UFS_FS_WRITE=y - -# -# Network File Systems -# +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -CONFIG_NCPFS_NLS=y -# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set @@ -764,10 +878,6 @@ CONFIG_CODA_FS=m # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SUN_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -808,35 +918,42 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m +CONFIG_DLM=m +# CONFIG_DLM_DEBUG is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set -# CONFIG_FRAME_POINTER is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_SAMPLES is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y @@ -845,9 +962,21 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m @@ -856,20 +985,35 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y From 865ab8753837b73fe1e800fc88462c5914eec549 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 2 Apr 2008 23:53:19 +0400 Subject: [PATCH 042/187] [MIPS] Pb1200: Fix header breakage Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- include/asm-mips/mach-pb1x00/pb1200.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h index ed5fd7390678..72213e3d02c7 100644 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -245,7 +245,7 @@ enum external_pb1200_ints { PB1200_SD1_INSERT_INT, PB1200_SD1_EJECT_INT, - PB1200_INT_END (PB1200_INT_BEGIN + 15) + PB1200_INT_END = PB1200_INT_BEGIN + 15 }; /* For drivers/pcmcia/au1000_db1x00.c */ From e64a3cfcd929d093a2f076bcace9afa7ba5a2e32 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 20 Mar 2008 20:59:34 +0300 Subject: [PATCH 043/187] [MIPS] Make KGDB compile on UP Building UP kernel with KGDB enabled produces the following errors and warning (fatal due to -Werror in arch/mips/kernel/Makefile): In file included from arch/mips/kernel/gdb-stub.c:142: include/asm/smp.h:25:1: "raw_smp_processor_id" redefined In file included from include/linux/sched.h:69, from arch/mips/kernel/gdb-stub.c:126: include/linux/smp.h:88:1: this is the location of the previous definition In file included from arch/mips/kernel/gdb-stub.c:142: include/asm/smp.h:62: error: redefinition of 'smp_send_reschedule' include/linux/smp.h:102: error: previous definition of 'smp_send_reschedule' was here include/asm/smp.h: In function `smp_send_reschedule': include/asm/smp.h:65: error: dereferencing pointer to incomplete type arch/mips/kernel/gdb-stub.c: At top level: arch/mips/kernel/gdb-stub.c:660: warning: 'kgdb_wait' defined but not used Fix the errors by not directly including (which is already included by ) and the warning by enclosing kgdb_wait() in #ifdef CONFIG_SMP. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/kernel/gdb-stub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c index 3191afa29ad8..25f4eab8ea9c 100644 --- a/arch/mips/kernel/gdb-stub.c +++ b/arch/mips/kernel/gdb-stub.c @@ -139,7 +139,6 @@ #include #include #include -#include /* * external low-level support routines @@ -656,6 +655,7 @@ void set_async_breakpoint(unsigned long *epc) *epc = (unsigned long)async_breakpoint; } +#ifdef CONFIG_SMP static void kgdb_wait(void *arg) { unsigned flags; @@ -668,6 +668,7 @@ static void kgdb_wait(void *arg) local_irq_restore(flags); } +#endif /* * GDB stub needs to call kgdb_wait on all processor with interrupts From 8bab8dded67d026c39367bbd5e27d2f6c556c38e Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Fri, 4 Apr 2008 14:29:57 -0700 Subject: [PATCH 044/187] cgroups: add cgroup support for enabling controllers at boot time The effects of cgroup_disable=foo are: - foo isn't auto-mounted if you mount all cgroups in a single hierarchy - foo isn't visible as an individually mountable subsystem As a result there will only ever be one call to foo->create(), at init time; all processes will stay in this group, and the group will never be mounted on a visible hierarchy. Any additional effects (e.g. not allocating metadata) are up to the foo subsystem. This doesn't handle early_init subsystems (their "disabled" bit isn't set be, but it could easily be extended to do so if any of the early_init systems wanted it - I think it would just involve some nastier parameter processing since it would occur before the command-line argument parser had been run. Hugh said: Ballpark figures, I'm trying to get this question out rather than processing the exact numbers: CONFIG_CGROUP_MEM_RES_CTLR adds 15% overhead to the affected paths, booting with cgroup_disable=memory cuts that back to 1% overhead (due to slightly bigger struct page). I'm no expert on distros, they may have no interest whatever in CONFIG_CGROUP_MEM_RES_CTLR=y; and the rest of us can easily build with or without it, or apply the cgroup_disable=memory patches. Unix bench's execl test result on x86_64 was == just after boot without mounting any cgroup fs.== mem_cgorup=off : Execl Throughput 43.0 3150.1 732.6 mem_cgroup=on : Execl Throughput 43.0 2932.6 682.0 == [lizf@cn.fujitsu.com: fix boot option parsing] Signed-off-by: Balbir Singh Cc: Paul Menage Cc: Balbir Singh Cc: Pavel Emelyanov Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Cc: Sudhir Kumar Cc: YAMAMOTO Takashi Cc: David Rientjes Signed-off-by: Li Zefan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 4 +++ include/linux/cgroup.h | 1 + kernel/cgroup.c | 42 +++++++++++++++++++++++++---- 3 files changed, 42 insertions(+), 5 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4cd1a5da80a4..32e9297ef747 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -375,6 +375,10 @@ and is between 256 and 4096 characters. It is defined in the file ccw_timeout_log [S390] See Documentation/s390/CommonIO for details. + cgroup_disable= [KNL] Disable a particular controller + Format: {name of the controller(s) to disable} + {Currently supported controllers - "memory"} + checkreqprot [SELINUX] Set initial checkreqprot flag value. Format: { "0" | "1" } See security/selinux/Kconfig help text. diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 028ba3b523b1..a6a6035a4e1e 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -256,6 +256,7 @@ struct cgroup_subsys { void (*bind)(struct cgroup_subsys *ss, struct cgroup *root); int subsys_id; int active; + int disabled; int early_init; #define MAX_CGROUP_TYPE_NAMELEN 32 const char *name; diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 53d86b4b0ce0..62f1a5231fe9 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -782,7 +782,14 @@ static int parse_cgroupfs_options(char *data, if (!*token) return -EINVAL; if (!strcmp(token, "all")) { - opts->subsys_bits = (1 << CGROUP_SUBSYS_COUNT) - 1; + /* Add all non-disabled subsystems */ + int i; + opts->subsys_bits = 0; + for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) { + struct cgroup_subsys *ss = subsys[i]; + if (!ss->disabled) + opts->subsys_bits |= 1ul << i; + } } else if (!strcmp(token, "noprefix")) { set_bit(ROOT_NOPREFIX, &opts->flags); } else if (!strncmp(token, "release_agent=", 14)) { @@ -800,7 +807,8 @@ static int parse_cgroupfs_options(char *data, for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) { ss = subsys[i]; if (!strcmp(token, ss->name)) { - set_bit(i, &opts->subsys_bits); + if (!ss->disabled) + set_bit(i, &opts->subsys_bits); break; } } @@ -2600,13 +2608,13 @@ static int proc_cgroupstats_show(struct seq_file *m, void *v) { int i; - seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\n"); + seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\tenabled\n"); mutex_lock(&cgroup_mutex); for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) { struct cgroup_subsys *ss = subsys[i]; - seq_printf(m, "%s\t%lu\t%d\n", + seq_printf(m, "%s\t%lu\t%d\t%d\n", ss->name, ss->root->subsys_bits, - ss->root->number_of_cgroups); + ss->root->number_of_cgroups, !ss->disabled); } mutex_unlock(&cgroup_mutex); return 0; @@ -3010,3 +3018,27 @@ static void cgroup_release_agent(struct work_struct *work) spin_unlock(&release_list_lock); mutex_unlock(&cgroup_mutex); } + +static int __init cgroup_disable(char *str) +{ + int i; + char *token; + + while ((token = strsep(&str, ",")) != NULL) { + if (!*token) + continue; + + for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) { + struct cgroup_subsys *ss = subsys[i]; + + if (!strcmp(token, ss->name)) { + ss->disabled = 1; + printk(KERN_INFO "Disabling %s control group" + " subsystem\n", ss->name); + break; + } + } + } + return 1; +} +__setup("cgroup_disable=", cgroup_disable); From 4077960e2a38ec59096ff993cd080056e17f3707 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Fri, 4 Apr 2008 14:29:59 -0700 Subject: [PATCH 045/187] memory controller: make memory resource control aware of boot options A boot option for the memory controller was discussed on lkml. It is a good idea to add it, since it saves memory for people who want to turn off the memory controller. By default the option is on for the following two reasons: 1. It provides compatibility with the current scheme where the memory controller turns on if the config option is enabled 2. It allows for wider testing of the memory controller, once the config option is enabled We still allow the create, destroy callbacks to succeed, since they are not aware of boot options. We do not populate the directory will memory resource controller specific files. Signed-off-by: Balbir Singh Cc: Paul Menage Cc: Balbir Singh Cc: Pavel Emelyanov Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Cc: Sudhir Kumar Cc: YAMAMOTO Takashi Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 9b648bd63451..23b5fa4cabd8 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -533,6 +533,9 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, unsigned long nr_retries = MEM_CGROUP_RECLAIM_RETRIES; struct mem_cgroup_per_zone *mz; + if (mem_cgroup_subsys.disabled) + return 0; + /* * Should page_cgroup's go to their own slab? * One could optimize the performance of the charging routine @@ -665,6 +668,9 @@ void mem_cgroup_uncharge_page(struct page *page) struct mem_cgroup_per_zone *mz; unsigned long flags; + if (mem_cgroup_subsys.disabled) + return; + /* * Check if our page_cgroup is valid */ @@ -705,6 +711,9 @@ int mem_cgroup_prepare_migration(struct page *page) { struct page_cgroup *pc; + if (mem_cgroup_subsys.disabled) + return 0; + lock_page_cgroup(page); pc = page_get_page_cgroup(page); if (pc) @@ -803,6 +812,9 @@ static int mem_cgroup_force_empty(struct mem_cgroup *mem) int ret = -EBUSY; int node, zid; + if (mem_cgroup_subsys.disabled) + return 0; + css_get(&mem->css); /* * page reclaim code (kswapd etc..) will move pages between @@ -1053,6 +1065,8 @@ static void mem_cgroup_destroy(struct cgroup_subsys *ss, static int mem_cgroup_populate(struct cgroup_subsys *ss, struct cgroup *cont) { + if (mem_cgroup_subsys.disabled) + return 0; return cgroup_add_files(cont, ss, mem_cgroup_files, ARRAY_SIZE(mem_cgroup_files)); } @@ -1065,6 +1079,9 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss, struct mm_struct *mm; struct mem_cgroup *mem, *old_mem; + if (mem_cgroup_subsys.disabled) + return; + mm = get_task_mm(p); if (mm == NULL) return; From fb6d080c6f75dfd7e23d5a3575334785aa8738eb Mon Sep 17 00:00:00 2001 From: Alexey Korolev Date: Fri, 4 Apr 2008 14:30:01 -0700 Subject: [PATCH 046/187] mtd: fix broken state in CFI driver caused by FL_SHUTDOWN THe CFI driver in 2.6.24 kernel is broken. Not so intensive read/write operations cause incomplete writes which lead to kernel panics in JFFS2. We investigated the issue - it is caused by bug in FL_SHUTDOWN parsing code. Sometimes chip returns -EIO as if it is in FL_SHUTDOWN state when it should wait in FL_PONT (error in order of conditions). The following patch fixes the bug in state parsing code of CFI. Also I've added comments to notify developers if they want to add new case in future. Signed-off-by: Alexey Korolev Reviewed-by: Joern Engel Cc: David Woodhouse Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mtd/chips/cfi_cmdset_0001.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 47794d23a42e..0080452531d6 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -718,7 +718,7 @@ static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long /* Someone else might have been playing with it. */ return -EAGAIN; } - + /* Fall through */ case FL_READY: case FL_CFI_QUERY: case FL_JEDEC_QUERY: @@ -778,14 +778,14 @@ static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long chip->state = FL_READY; return 0; + case FL_SHUTDOWN: + /* The machine is rebooting now,so no one can get chip anymore */ + return -EIO; case FL_POINT: /* Only if there's no operation suspended... */ if (mode == FL_READY && chip->oldstate == FL_READY) return 0; - - case FL_SHUTDOWN: - /* The machine is rebooting now,so no one can get chip anymore */ - return -EIO; + /* Fall through */ default: sleep: set_current_state(TASK_UNINTERRUPTIBLE); From abd24df828f1a72971db29d1b74fefae104ea9e2 Mon Sep 17 00:00:00 2001 From: Carol Hebert Date: Fri, 4 Apr 2008 14:30:03 -0700 Subject: [PATCH 047/187] ipmi: change device node ordering to reflect probe order In 2.6.14 a patch was merged which switching the order of the ipmi device naming from in-order-of-discovery over to reverse-order-of-discovery. So on systems with multiple BMC interfaces, the ipmi device names are being created in reverse order relative to how they are discovered on the system (e.g. on an IBM x3950 multinode server with N nodes, the device name for the BMC in the first node is /dev/ipmiN-1 and the device name for the BMC in the last node is /dev/ipmi0, etc.). The problem is caused by the list handling routines chosen in dmi_scan.c. Using list_add() causes the multiple ipmi devices to be added to the device list using a stack-paradigm and so the ipmi driver subsequently pulls them off during initialization in LIFO order. This patch changes the dmi_save_ipmi_device() list handling paradigm to a queue, thereby allowing the ipmi driver to build the ipmi device names in the order in which they are found on the system. Signed-off-by: Carol Hebert Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/firmware/dmi_scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 4072449ad1cd..c5e3ed7e903b 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -266,7 +266,7 @@ static void __init dmi_save_ipmi_device(const struct dmi_header *dm) dev->name = "IPMI controller"; dev->device_data = data; - list_add(&dev->list, &dmi_devices); + list_add_tail(&dev->list, &dmi_devices); } static void __init dmi_save_extended_devices(const struct dmi_header *dm) From 797de7bdb253624c16144f40b72ec65d63cdcca2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 5 Apr 2008 12:14:13 -0700 Subject: [PATCH 048/187] Revert "ACPI: Ignore _BQC object when registering backlight device" This reverts commit 7c0ea45be4f114d85ee35caeead8e1660699c46f which caused a regression with the backlight being set to off when a laptop doesn't have a _BQC entry to query the actual backlight value. The code blindly then falls back on a value of 0. See http://bugzilla.kernel.org/show_bug.cgi?id=10387 http://lkml.org/lkml/2008/4/2/366 for details. Bisected-and-reported-by: Andrey Borzenkov Cc: Zhao Yakui Cc: Zhang Rui Cc: Len Brown Signed-off-by: Linus Torvalds --- drivers/acpi/video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 12fb44f16766..980a74188781 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -713,7 +713,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) kfree(obj); - if (device->cap._BCL && device->cap._BCM && max_level > 0) { + if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){ int result; static int count = 0; char *name; From cc1020f15ad0f843c0111bf4b77bdfaabca79571 Mon Sep 17 00:00:00 2001 From: Andrew Paprocki Date: Wed, 2 Apr 2008 02:43:19 -0400 Subject: [PATCH 049/187] [WATCHDOG] it8712f_wdt Zero MSB timeout byte when disabling watchdog I noticed this while testing the latest code. I'm not sure if it is required, but the normal (or LSB) timeout value is set to zero, so the MSB should be as well to stay consistent. If the chip revision is >= 8, set MSB of the 16-bit timeout value to zero when disabling the watchdog in it8712f_wdt_disable(). Signed-off-by: Andrew Paprocki Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/it8712f_wdt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index ca90c5192596..445b7e812112 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -200,6 +200,8 @@ it8712f_wdt_disable(void) superio_outb(0, WDT_CONFIG); superio_outb(0, WDT_CONTROL); + if (revision >= 0x08) + superio_outb(0, WDT_TIMEOUT + 1); superio_outb(0, WDT_TIMEOUT); superio_exit(); From 4a8f3a5727c589a59bcaaca43dc1025b347b7a75 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 1 Apr 2008 16:48:23 -0300 Subject: [PATCH 050/187] V4L/DVB (7460): bttv: Bt832 - fix possible NULL pointer deref This patch does fix potential NULL pointer dereference Signed-off-by: Cyrill Gorcunov Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bt832.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/bt8xx/bt832.c b/drivers/media/video/bt8xx/bt832.c index a51876137880..f92f06dec0d0 100644 --- a/drivers/media/video/bt8xx/bt832.c +++ b/drivers/media/video/bt8xx/bt832.c @@ -97,6 +97,11 @@ int bt832_init(struct i2c_client *i2c_client_s) int rc; buf=kmalloc(65,GFP_KERNEL); + if (!buf) { + v4l_err(&t->client, + "Unable to allocate memory. Detaching.\n"); + return 0; + } bt832_hexdump(i2c_client_s,buf); if(buf[0x40] != 0x31) { @@ -211,7 +216,12 @@ bt832_command(struct i2c_client *client, unsigned int cmd, void *arg) switch (cmd) { case BT832_HEXDUMP: { unsigned char *buf; - buf=kmalloc(65,GFP_KERNEL); + buf = kmalloc(65, GFP_KERNEL); + if (!buf) { + v4l_err(&t->client, + "Unable to allocate memory\n"); + break; + } bt832_hexdump(&t->client,buf); kfree(buf); } From 8e08af3c30b4e5f59adff0baa33fd346227b45e2 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 2 Apr 2008 22:14:41 -0300 Subject: [PATCH 051/187] V4L/DVB (7495): s5h1409: fix blown-away bit in function s5h1409_set_gpio Preserve all other bits when setting gpio. Signed-off-by: Michael Krufky Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1409.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 819433485d3b..1a4d8319773c 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -445,7 +445,7 @@ static int s5h1409_set_gpio(struct dvb_frontend* fe, int enable) s5h1409_readreg(state, 0xe3) | 0x1100); else return s5h1409_writereg(state, 0xe3, - s5h1409_readreg(state, 0xe3) & 0xeeff); + s5h1409_readreg(state, 0xe3) & 0xfeff); } static int s5h1409_sleep(struct dvb_frontend* fe, int enable) From a80c5aa6da485da63def31442a19cdd6ff495ce6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 3 Apr 2008 20:08:04 -0300 Subject: [PATCH 052/187] V4L/DVB (7499): v4l/dvb Kconfig: Fix bugzilla #10067 tda8290 breaks if tuner is selected, but CONFIG_DVB=n. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/Makefile b/drivers/media/Makefile index 8cf91353b56a..7b8bb6949f5e 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -6,3 +6,6 @@ obj-y := common/ obj-y += video/ obj-$(CONFIG_VIDEO_DEV) += radio/ obj-$(CONFIG_DVB_CORE) += dvb/ +ifeq ($(CONFIG_DVB_CORE),) + obj-$(CONFIG_VIDEO_TUNER) += dvb/frontends/ +endif From dd6e9467e0a7ddf02788f30adfe1cf2851c25fb8 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 8 Mar 2008 06:07:38 -0300 Subject: [PATCH 053/187] V4L/DVB (7496): pvrusb2: add new usb pid for 75xxx models Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 4df6d6d936fc..2b7b1fa0094c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -200,6 +200,8 @@ struct usb_device_id pvr2_device_table[] = { #endif { USB_DEVICE(0x2040, 0x7500), .driver_info = (kernel_ulong_t)&pvr2_device_75xxx}, + { USB_DEVICE(0x2040, 0x7501), + .driver_info = (kernel_ulong_t)&pvr2_device_75xxx}, { } }; From 92c9d07507f0a90b64172bfede7e6fa845e8e66b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 15 Mar 2008 23:59:29 -0300 Subject: [PATCH 054/187] V4L/DVB (7497): pvrusb2: add new usb pid for 73xxx models Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 2b7b1fa0094c..98557ce950cd 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -154,6 +154,37 @@ static const struct pvr2_device_desc pvr2_device_onair_usb2 = { +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 73xxx */ + +static const char *pvr2_client_73xxx[] = { + "cx25840", + "tuner", +}; + +static const char *pvr2_fw1_names_73xxx[] = { + "v4l-pvrusb2-73xxx-01.fw", +}; + +static const struct pvr2_device_desc pvr2_device_73xxx = { + .description = "WinTV PVR USB2 Model Category 73xxxx", + .shortname = "73xxx", + .client_modules.lst = pvr2_client_73xxx, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_73xxx), + .fx2_firmware.lst = pvr2_fw1_names_73xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx), + .flag_has_cx25840 = !0, + .flag_has_hauppauge_rom = !0, + .flag_has_analogtuner = !0, + .flag_has_composite = !0, + .flag_has_svideo = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, +}; + + + /*------------------------------------------------------------------------*/ /* Hauppauge PVR-USB2 Model 75xxx */ @@ -198,6 +229,8 @@ struct usb_device_id pvr2_device_table[] = { { USB_DEVICE(0x11ba, 0x1001), .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2}, #endif + { USB_DEVICE(0x2040, 0x7300), + .driver_info = (kernel_ulong_t)&pvr2_device_73xxx}, { USB_DEVICE(0x2040, 0x7500), .driver_info = (kernel_ulong_t)&pvr2_device_75xxx}, { USB_DEVICE(0x2040, 0x7501), From 164fc5dcd6a1026fc713f5c63fad899aa484888c Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sun, 6 Apr 2008 23:56:57 +0100 Subject: [PATCH 055/187] scsi: fix sense_slab/bio swapping livelock Since 2.6.25-rc7, I've been seeing an occasional livelock on one x86_64 machine, copying kernel trees to tmpfs, paging out to swap. Signature: 6000 pages under writeback but never getting written; most tasks of interest trying to reclaim, but each get_swap_bio waiting for a bio in mempool_alloc's io_schedule_timeout(5*HZ); every five seconds an atomic page allocation failure report from kblockd failing to allocate a sense_buffer in __scsi_get_command. __scsi_get_command has a (one item) free_list to protect against this, but rc1's [SCSI] use dynamically allocated sense buffer de25deb18016f66dcdede165d07654559bb332bc upset that slightly. When it fails to allocate from the separate sense_slab, instead of giving up, it must fall back to the command free_list, which is sure to have a sense_buffer attached. Either my earlier -rc testing missed this, or there's some recent contributory factor. One very significant factor is SLUB, which merges slab caches when it can, and on 64-bit happens to merge both bio cache and sense_slab cache into kmalloc's 128-byte cache: so that under this swapping load, bios above are liable to gobble up all the slots needed for scsi_cmnd sense_buffers below. That's disturbing behaviour, and I tried a few things to fix it. Adding a no-op constructor to the sense_slab inhibits SLUB from merging it, and stops all the allocation failures I was seeing; but it's rather a hack, and perhaps in different configurations we have other caches on the swapout path which are ill-merged. Another alternative is to revert the separate sense_slab, using cache-line-aligned sense_buffer allocated beyond scsi_cmnd from the one kmem_cache; but that might waste more memory, and is only a way of diverting around the known problem. While I don't like seeing the allocation failures, and hate the idea of all those bios piled up above a scsi host working one by one, it does seem to emerge fairly soon with the livelock fix. So lacking better ideas, stick with that one clear fix for now. Signed-off-by: Hugh Dickins Cc: James Bottomley Cc: Andrew Morton Cc: FUJITA Tomonori Cc: Jens Axboe Cc: Christoph Lameter Cc: Pekka Enberg Cc: Peter Zijlstra Cc: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/scsi/scsi.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index e5c6f6af8765..c78b836f59dd 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -181,6 +181,18 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) cmd = kmem_cache_alloc(shost->cmd_pool->cmd_slab, gfp_mask | shost->cmd_pool->gfp_mask); + if (likely(cmd)) { + buf = kmem_cache_alloc(shost->cmd_pool->sense_slab, + gfp_mask | shost->cmd_pool->gfp_mask); + if (likely(buf)) { + memset(cmd, 0, sizeof(*cmd)); + cmd->sense_buffer = buf; + } else { + kmem_cache_free(shost->cmd_pool->cmd_slab, cmd); + cmd = NULL; + } + } + if (unlikely(!cmd)) { unsigned long flags; @@ -197,16 +209,6 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) memset(cmd, 0, sizeof(*cmd)); cmd->sense_buffer = buf; } - } else { - buf = kmem_cache_alloc(shost->cmd_pool->sense_slab, - gfp_mask | shost->cmd_pool->gfp_mask); - if (likely(buf)) { - memset(cmd, 0, sizeof(*cmd)); - cmd->sense_buffer = buf; - } else { - kmem_cache_free(shost->cmd_pool->cmd_slab, cmd); - cmd = NULL; - } } return cmd; From 3bf48468fe84468a148e4f19465e0a725c0f977b Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Sun, 6 Apr 2008 11:55:04 -0700 Subject: [PATCH 056/187] fix IS_I9XX macro in i915 DRM driver Now that we're mapping registers in the DRM driver at load time, the driver actually checks the PCI ID, so we need to make sure the macros have all the right bits (and longer term use the DRM headers as the sole copy of the PCI & register definitions). This patch adds 945GME support to the DRM headers, fixing a regression reported in http://bugzilla.kernel.org/show_bug.cgi?id=10395. Tested-by: Alexander Oltu Signed-off-by: Jesse Barnes Signed-off-by: Linus Torvalds --- drivers/char/drm/i915_drv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index c10d128e34db..675d88bda066 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -1092,8 +1092,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a) #define IS_I915GM(dev) ((dev)->pci_device == 0x2592) #define IS_I945G(dev) ((dev)->pci_device == 0x2772) -#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2) - +#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\ + (dev)->pci_device == 0x27AE) #define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \ (dev)->pci_device == 0x2982 || \ (dev)->pci_device == 0x2992 || \ From 64ba4f230d30b089bc89db2e59d02c1efa5ac769 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sun, 6 Apr 2008 17:23:38 +1000 Subject: [PATCH 057/187] Fix booting pentium+ with dodgy TSC We handle a broken tsc these days, so no need to panic. We clear the TSC bit when tsc_init decides it's unreliable (eg. under lguest w/ bad host TSC), leading to bogus panic. Signed-off-by: Rusty Russell Acked-by: Ingo Molnar Signed-off-by: Linus Torvalds --- arch/x86/kernel/cpu/bugs.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 027e5c003b16..170d2f5523b2 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -142,14 +142,6 @@ static void __init check_config(void) panic("Kernel requires i486+ for 'invlpg' and other features"); #endif -/* - * If we configured ourselves for a TSC, we'd better have one! - */ -#ifdef CONFIG_X86_TSC - if (!cpu_has_tsc) - panic("Kernel compiled for Pentium+, requires TSC feature!"); -#endif - /* * If we were told we had a good local APIC, check for buggy Pentia, * i.e. all B steppings and the C2 stepping of P54C when using their From 5b13d863573e746739ccfc24ac1a9473cfee8df1 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 7 Apr 2008 20:58:08 +0200 Subject: [PATCH 058/187] revert "x86: tsc prevent time going backwards" revert: | commit 47001d603375f857a7fab0e9c095d964a1ea0039 | Author: Thomas Gleixner | Date: Tue Apr 1 19:45:18 2008 +0200 | | x86: tsc prevent time going backwards it has been identified to cause suspend regression - and the commit fixes a longstanding bug that existed before 2.6.25 was opened - so it can wait some more until the effects are better understood. Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc_32.c | 15 +-------------- arch/x86/kernel/tsc_64.c | 23 +++-------------------- 2 files changed, 4 insertions(+), 34 deletions(-) diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index d7498b34c8e9..f14cfd9d1f94 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -287,27 +287,14 @@ core_initcall(cpufreq_tsc); /* clock source code */ static unsigned long current_tsc_khz = 0; -static struct clocksource clocksource_tsc; -/* - * We compare the TSC to the cycle_last value in the clocksource - * structure to avoid a nasty time-warp issue. This can be observed in - * a very small window right after one CPU updated cycle_last under - * xtime lock and the other CPU reads a TSC value which is smaller - * than the cycle_last reference value due to a TSC which is slighty - * behind. This delta is nowhere else observable, but in that case it - * results in a forward time jump in the range of hours due to the - * unsigned delta calculation of the time keeping core code, which is - * necessary to support wrapping clocksources like pm timer. - */ static cycle_t read_tsc(void) { cycle_t ret; rdtscll(ret); - return ret >= clocksource_tsc.cycle_last ? - ret : clocksource_tsc.cycle_last; + return ret; } static struct clocksource clocksource_tsc = { diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index 01fc9f0c39e2..947554ddabb6 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -11,7 +11,6 @@ #include #include #include -#include static int notsc __initdata = 0; @@ -291,34 +290,18 @@ int __init notsc_setup(char *s) __setup("notsc", notsc_setup); -static struct clocksource clocksource_tsc; -/* - * We compare the TSC to the cycle_last value in the clocksource - * structure to avoid a nasty time-warp. This can be observed in a - * very small window right after one CPU updated cycle_last under - * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which - * is smaller than the cycle_last reference value due to a TSC which - * is slighty behind. This delta is nowhere else observable, but in - * that case it results in a forward time jump in the range of hours - * due to the unsigned delta calculation of the time keeping core - * code, which is necessary to support wrapping clocksources like pm - * timer. - */ +/* clock source code: */ static cycle_t read_tsc(void) { cycle_t ret = (cycle_t)get_cycles(); - - return ret >= clocksource_tsc.cycle_last ? - ret : clocksource_tsc.cycle_last; + return ret; } static cycle_t __vsyscall_fn vread_tsc(void) { cycle_t ret = (cycle_t)vget_cycles(); - - return ret >= __vsyscall_gtod_data.clock.cycle_last ? - ret : __vsyscall_gtod_data.clock.cycle_last; + return ret; } static struct clocksource clocksource_tsc = { From 4f41c94d5c24e3b3453e9df03c0a80ca1acf00d2 Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Mon, 7 Apr 2008 12:14:45 +0200 Subject: [PATCH 059/187] x86: fix call to set_cyc2ns_scale() from time_cpufreq_notifier() In time_cpufreq_notifier() the cpu id to act upon is held in freq->cpu. Use it instead of smp_processor_id() in the call to set_cyc2ns_scale(). This makes the preempt_*able() unnecessary and lets set_cyc2ns_scale() update the intended cpu's cyc2ns. Related mail/thread: http://lkml.org/lkml/2007/12/7/130 Signed-off-by: Karsten Wiese Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc_32.c | 4 +--- arch/x86/kernel/tsc_64.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index f14cfd9d1f94..c2241e04ea5f 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -256,9 +256,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data) ref_freq, freq->new); if (!(freq->flags & CPUFREQ_CONST_LOOPS)) { tsc_khz = cpu_khz; - preempt_disable(); - set_cyc2ns_scale(cpu_khz, smp_processor_id()); - preempt_enable(); + set_cyc2ns_scale(cpu_khz, freq->cpu); /* * TSC based sched_clock turns * to junk w/ cpufreq diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index 947554ddabb6..d3bebaaad842 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -148,9 +148,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, mark_tsc_unstable("cpufreq changes"); } - preempt_disable(); - set_cyc2ns_scale(tsc_khz_ref, smp_processor_id()); - preempt_enable(); + set_cyc2ns_scale(tsc_khz_ref, freq->cpu); return 0; } From 871de939030c903fd5ed50a7c4c88e02998e1cbc Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 7 Apr 2008 11:56:34 -0700 Subject: [PATCH 060/187] x86: fix 64-bit asm NOPS for CONFIG_GENERIC_CPU ASM_NOP's for 64-bit kernel with CONFIG_GENERIC_CPU is broken with the recent x86 nops merge. They were using GENERIC_NOPS which will truncate the upper 32bits of %rsi, because of the missing 64bit rex prefix. For now, fall back ASM NOPS for generic cpu to K8 NOPS, similar to the code before the wrong x86 nop merge. This should resolve the crash seen by Ingo on a test-system: BUG: unable to handle kernel paging request at 00000000d80d8ee8 IP: [] save_i387_ia32+0x61/0xd8 PGD b8e0067 PUD 51490067 PMD 0 Oops: 0000 [1] SMP CPU 2 Modules linked in: Pid: 3871, comm: distcc Not tainted 2.6.25-rc7-sched-devel.git-x86-latest.git #359 RIP: 0010:[] [] save_i387_ia32+0x61/0xd8 RSP: 0000:ffff81003abd3cb8 EFLAGS: 00010246 RAX: ffff810082e93400 RBX: 00000000ffc37f84 RCX: ffff8100d80d8ee0 RDX: 0000000000000000 RSI: 00000000d80d8ee0 RDI: ffff810082e93400 RBP: 00000000ffc37fdc R08: 00000000ffc37f88 R09: 0000000000000008 R10: ffff81003abd2000 R11: 0000000000000000 R12: ffff810082e93400 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff81011fb12dc0(0063) knlGS:00000000f7f1a6c0 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000d80d8ee8 CR3: 0000000076922000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process distcc (pid: 3871, threadinfo ffff81003abd2000, task ffff8100d80d8ee0) Stack: ffff8100bb670380 ffffffff8026de50 0000000000000118 0000000000000002 0000000000000002 ffff81003abd3e68 ffff81003abd3ed8 ffff81003abd3de8 ffff81003abd3d18 ffffffff80229785 ffff8100d80d8ee0 ffff810001041280 Call Trace: [] ? __generic_file_aio_write_nolock+0x343/0x377 [] ? update_curr+0x54/0x64 [] ? ia32_setup_sigcontext+0x125/0x1d2 [] ? ia32_setup_frame+0x73/0x1a5 [] ? do_notify_resume+0x1aa/0x7db [] ? getnstimeofday+0x31/0x85 [] ? ktime_get_ts+0x17/0x48 [] ? ktime_get+0xc/0x41 [] ? hrtimer_nanosleep+0x75/0xd5 [] ? hrtimer_wakeup+0x0/0x21 [] ? int_signal+0x12/0x17 [] ? dummy_file_free_security+0x0/0x1 Code: a6 08 05 00 00 f6 40 14 01 74 34 4c 89 e7 48 0f ae 07 48 8b 86 08 05 00 00 80 78 02 00 79 02 db e2 90 8d b4 26 00 00 00 00 89 f6 <48> 8b 46 08 83 60 14 fe 0f 20 c0 48 83 c8 08 0f 22 c0 eb 07 c6 Signed-off-by: Suresh Siddha Signed-off-by: Ingo Molnar --- include/asm-x86/nops.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/include/asm-x86/nops.h b/include/asm-x86/nops.h index e3b2bce0aff8..b3930ae539b3 100644 --- a/include/asm-x86/nops.h +++ b/include/asm-x86/nops.h @@ -73,16 +73,7 @@ #define P6_NOP7 ".byte 0x0f,0x1f,0x80,0,0,0,0\n" #define P6_NOP8 ".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n" -#if defined(CONFIG_MK8) -#define ASM_NOP1 K8_NOP1 -#define ASM_NOP2 K8_NOP2 -#define ASM_NOP3 K8_NOP3 -#define ASM_NOP4 K8_NOP4 -#define ASM_NOP5 K8_NOP5 -#define ASM_NOP6 K8_NOP6 -#define ASM_NOP7 K8_NOP7 -#define ASM_NOP8 K8_NOP8 -#elif defined(CONFIG_MK7) +#if defined(CONFIG_MK7) #define ASM_NOP1 K7_NOP1 #define ASM_NOP2 K7_NOP2 #define ASM_NOP3 K7_NOP3 @@ -100,6 +91,15 @@ #define ASM_NOP6 P6_NOP6 #define ASM_NOP7 P6_NOP7 #define ASM_NOP8 P6_NOP8 +#elif defined(CONFIG_X86_64) +#define ASM_NOP1 K8_NOP1 +#define ASM_NOP2 K8_NOP2 +#define ASM_NOP3 K8_NOP3 +#define ASM_NOP4 K8_NOP4 +#define ASM_NOP5 K8_NOP5 +#define ASM_NOP6 K8_NOP6 +#define ASM_NOP7 K8_NOP7 +#define ASM_NOP8 K8_NOP8 #else #define ASM_NOP1 GENERIC_NOP1 #define ASM_NOP2 GENERIC_NOP2 From 2557a933b795c1988c721ebb871cd735128bb9cb Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 7 Apr 2008 14:30:28 +1000 Subject: [PATCH 061/187] virtio: remove overzealous BUG_ON. The 'disable_cb' callback is designed as an optimization to tell the host we don't need callbacks now. As it is not reliable, the debug check is overzealous: it can happen on two CPUs at the same time. Document this. Even if it were reliable, the virtio_net driver doesn't disable callbacks on transmit so the START_USE/END_USE debugging reentrance protection can be easily tripped even on UP. Thanks to Balaji Rao for the bug report and testing. Signed-off-by: Rusty Russell CC: Balaji Rao Signed-off-by: Linus Torvalds --- drivers/virtio/virtio_ring.c | 3 --- include/linux/virtio.h | 5 ++++- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index aa714028641e..c2fa5c630813 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -214,10 +214,7 @@ static void vring_disable_cb(struct virtqueue *_vq) { struct vring_virtqueue *vq = to_vvq(_vq); - START_USE(vq); - BUG_ON(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT); vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT; - END_USE(vq); } static bool vring_enable_cb(struct virtqueue *_vq) diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 12c18ac1b973..e7d10845b3c1 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -41,6 +41,8 @@ struct virtqueue * Returns NULL or the "data" token handed to add_buf. * @disable_cb: disable callbacks * vq: the struct virtqueue we're talking about. + * Note that this is not necessarily synchronous, hence unreliable and only + * useful as an optimization. * @enable_cb: restart callbacks after disable_cb. * vq: the struct virtqueue we're talking about. * This re-enables callbacks; it returns "false" if there are pending @@ -48,7 +50,8 @@ struct virtqueue * checking for more work, and enabling callbacks. * * Locking rules are straightforward: the driver is responsible for - * locking. No two operations may be invoked simultaneously. + * locking. No two operations may be invoked simultaneously, with the exception + * of @disable_cb. * * All operations can be called in any context. */ From 099c736a470c8080a166e7a089f1e48e15f9947c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 7 Apr 2008 13:20:08 -0700 Subject: [PATCH 062/187] Revert "smc91x: fix build breakage from the SMC_GET_MAC_ADDR API upgrade" This reverts commit 9e6db60825ef7e7999abc610ce256ba768e58162, which was merged without the API it needed, causing build breakage. Reported-by: Bryan Wu Acked-by: Jeff Garzik Signed-off-by: Linus Torvalds --- drivers/net/smc91x.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 98a832a75539..51d4134b37b1 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -92,14 +92,14 @@ #define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l) # endif /* check if the mac in reg is valid */ -#define SMC_GET_MAC_ADDR(lp, addr) \ +#define SMC_GET_MAC_ADDR(addr) \ do { \ unsigned int __v; \ - __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \ + __v = SMC_inw(ioaddr, ADDR0_REG); \ addr[0] = __v; addr[1] = __v >> 8; \ - __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \ + __v = SMC_inw(ioaddr, ADDR1_REG); \ addr[2] = __v; addr[3] = __v >> 8; \ - __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \ + __v = SMC_inw(ioaddr, ADDR2_REG); \ addr[4] = __v; addr[5] = __v >> 8; \ if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \ random_ether_addr(addr); \ From 6ea0a4679d6a11c66cfeb26d15244fb6f9b52d14 Mon Sep 17 00:00:00 2001 From: Anthony Liguori Date: Mon, 7 Apr 2008 15:33:16 -0500 Subject: [PATCH 063/187] virtio_net: remove overzealous printk The 'disable_cb' is really just a hint and as such, it's possible for more work to get queued up while callbacks are disabled. Under stress with an SMP guest, this printk triggers very frequently. There is no race here, this is how things are designed to work so let's just remove the printk. Signed-off-by: Anthony Liguori Acked-by: Rusty Russell Signed-off-by: Linus Torvalds --- drivers/net/virtio_net.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index b58472cf76f8..d1a200ff5fd2 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -284,7 +284,6 @@ again: /* Activate callback for using skbs: if this returns false it * means some were used in the meantime. */ if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) { - printk("Unlikely: restart svq race\n"); vi->svq->vq_ops->disable_cb(vi->svq); netif_start_queue(dev); goto again; From c976816b6e901341ec3c4653147316c15549a1c4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 7 Apr 2008 23:30:10 +0200 Subject: [PATCH 064/187] siimage: fix kernel oops on PPC 44x Fix kernel oops due to machine check occuring in init_chipset_siimage() on PPC 44x platforms. These 32-bit CPUs have 36-bit physical address and PCI I/O and memory spaces are mapped beyond 4 GB; arch/ppc/ code has a fixup in ioremap() that creates an illusion of the PCI I/O and memory resources being mapped below 4 GB, while arch/powerpc/ code got rid of this fixup with PPC 44x having instead CONFIG_RESOURCES_64BIT=y -- this causes the resources to be truncated to 32-bit 'unsigned long' type in this driver, and so non-existant memory being ioremap'ed and then accessed... Thanks to Valentine Barshak for providing an initial patch and explanations. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/siimage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index cc4be9621bc0..8d624afe8529 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -492,7 +492,7 @@ static void proc_reports_siimage (struct pci_dev *dev, u8 clocking, const char * static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name) { - unsigned long bar5 = pci_resource_start(dev, 5); + resource_size_t bar5 = pci_resource_start(dev, 5); unsigned long barsize = pci_resource_len(dev, 5); u8 tmpbyte = 0; void __iomem *ioaddr; From 9c5a3d729cf430609d091ff610a7db363aafcd47 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 5 Apr 2008 15:13:23 +0100 Subject: [PATCH 065/187] [MIPS] Handle aliases in vmalloc correctly. flush_cache_vmap / flush_cache_vunmap were calling flush_cache_all which - having been deprecated - turned into a nop ... Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 14 ++++++++++++++ arch/mips/mm/c-tx39.c | 15 +++++++++++++++ arch/mips/mm/cache.c | 3 +++ include/asm-mips/cacheflush.h | 18 ++++++++++++++++-- 4 files changed, 48 insertions(+), 2 deletions(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 6496925b5e29..77aefb4ebedd 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -361,6 +361,16 @@ static inline int has_valid_asid(const struct mm_struct *mm) #endif } +static void r4k__flush_cache_vmap(void) +{ + r4k_blast_dcache(); +} + +static void r4k__flush_cache_vunmap(void) +{ + r4k_blast_dcache(); +} + static inline void local_r4k_flush_cache_range(void * args) { struct vm_area_struct *vma = args; @@ -1281,6 +1291,10 @@ void __cpuinit r4k_cache_init(void) PAGE_SIZE - 1); else shm_align_mask = PAGE_SIZE-1; + + __flush_cache_vmap = r4k__flush_cache_vmap; + __flush_cache_vunmap = r4k__flush_cache_vunmap; + flush_cache_all = cache_noop; __flush_cache_all = r4k___flush_cache_all; flush_cache_mm = r4k_flush_cache_mm; diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index b09d56981d53..a9f7f1f5e9b4 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -122,6 +122,16 @@ static inline void tx39_blast_icache(void) local_irq_restore(flags); } +static void tx39__flush_cache_vmap(void) +{ + tx39_blast_dcache(); +} + +static void tx39__flush_cache_vunmap(void) +{ + tx39_blast_dcache(); +} + static inline void tx39_flush_cache_all(void) { if (!cpu_has_dc_aliases) @@ -344,6 +354,8 @@ void __cpuinit tx39_cache_init(void) switch (current_cpu_type()) { case CPU_TX3912: /* TX39/H core (writethru direct-map cache) */ + __flush_cache_vmap = tx39__flush_cache_vmap; + __flush_cache_vunmap = tx39__flush_cache_vunmap; flush_cache_all = tx39h_flush_icache_all; __flush_cache_all = tx39h_flush_icache_all; flush_cache_mm = (void *) tx39h_flush_icache_all; @@ -369,6 +381,9 @@ void __cpuinit tx39_cache_init(void) write_c0_wired(0); /* set 8 on reset... */ /* board-dependent init code may set WBON */ + __flush_cache_vmap = tx39__flush_cache_vmap; + __flush_cache_vunmap = tx39__flush_cache_vunmap; + flush_cache_all = tx39_flush_cache_all; __flush_cache_all = tx39___flush_cache_all; flush_cache_mm = tx39_flush_cache_mm; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 51ab1faa027d..f5903679ee6a 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -30,6 +30,9 @@ void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); void (*flush_icache_range)(unsigned long start, unsigned long end); +void (*__flush_cache_vmap)(void); +void (*__flush_cache_vunmap)(void); + /* MIPS specific cache operations */ void (*flush_cache_sigtramp)(unsigned long addr); void (*local_flush_data_cache_page)(void * addr); diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h index 01e7eadc97e2..d5c0f2fda51b 100644 --- a/include/asm-mips/cacheflush.h +++ b/include/asm-mips/cacheflush.h @@ -63,8 +63,22 @@ static inline void flush_icache_page(struct vm_area_struct *vma, } extern void (*flush_icache_range)(unsigned long start, unsigned long end); -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() + +extern void (*__flush_cache_vmap)(void); + +static inline void flush_cache_vmap(unsigned long start, unsigned long end) +{ + if (cpu_has_dc_aliases) + __flush_cache_vmap(); +} + +extern void (*__flush_cache_vunmap)(void); + +static inline void flush_cache_vunmap(unsigned long start, unsigned long end) +{ + if (cpu_has_dc_aliases) + __flush_cache_vunmap(); +} extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page, unsigned long vaddr, void *dst, const void *src, From 869ab5147e1eead890245cfd4f652ba282b6ac26 Mon Sep 17 00:00:00 2001 From: Stephen Smalley Date: Fri, 4 Apr 2008 08:46:05 -0400 Subject: [PATCH 066/187] SELinux: more GFP_NOFS fixups to prevent selinux from re-entering the fs code More cases where SELinux must not re-enter the fs code. Called from the d_instantiate security hook. Signed-off-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/hooks.c | 7 ++++--- security/selinux/include/security.h | 3 ++- security/selinux/ss/services.c | 12 +++++++----- 3 files changed, 13 insertions(+), 9 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 820d07a60ab0..89bb6d36c0a7 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1143,7 +1143,7 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent } len = INITCONTEXTLEN; - context = kmalloc(len, GFP_KERNEL); + context = kmalloc(len, GFP_NOFS); if (!context) { rc = -ENOMEM; dput(dentry); @@ -1161,7 +1161,7 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent } kfree(context); len = rc; - context = kmalloc(len, GFP_KERNEL); + context = kmalloc(len, GFP_NOFS); if (!context) { rc = -ENOMEM; dput(dentry); @@ -1185,7 +1185,8 @@ static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dent rc = 0; } else { rc = security_context_to_sid_default(context, rc, &sid, - sbsec->def_sid); + sbsec->def_sid, + GFP_NOFS); if (rc) { printk(KERN_WARNING "%s: context_to_sid(%s) " "returned %d for dev=%s ino=%ld\n", diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h index f7d2f03781f2..44e12ec88090 100644 --- a/security/selinux/include/security.h +++ b/security/selinux/include/security.h @@ -86,7 +86,8 @@ int security_sid_to_context(u32 sid, char **scontext, int security_context_to_sid(char *scontext, u32 scontext_len, u32 *out_sid); -int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *out_sid, u32 def_sid); +int security_context_to_sid_default(char *scontext, u32 scontext_len, + u32 *out_sid, u32 def_sid, gfp_t gfp_flags); int security_get_user_sids(u32 callsid, char *username, u32 **sids, u32 *nel); diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index f37418601215..3f2bad28ee7b 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -680,7 +680,8 @@ out: } -static int security_context_to_sid_core(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid) +static int security_context_to_sid_core(char *scontext, u32 scontext_len, + u32 *sid, u32 def_sid, gfp_t gfp_flags) { char *scontext2; struct context context; @@ -709,7 +710,7 @@ static int security_context_to_sid_core(char *scontext, u32 scontext_len, u32 *s null suffix to the copy to avoid problems with the existing attr package, which doesn't view the null terminator as part of the attribute value. */ - scontext2 = kmalloc(scontext_len+1,GFP_KERNEL); + scontext2 = kmalloc(scontext_len+1, gfp_flags); if (!scontext2) { rc = -ENOMEM; goto out; @@ -809,7 +810,7 @@ out: int security_context_to_sid(char *scontext, u32 scontext_len, u32 *sid) { return security_context_to_sid_core(scontext, scontext_len, - sid, SECSID_NULL); + sid, SECSID_NULL, GFP_KERNEL); } /** @@ -829,10 +830,11 @@ int security_context_to_sid(char *scontext, u32 scontext_len, u32 *sid) * Returns -%EINVAL if the context is invalid, -%ENOMEM if insufficient * memory is available, or 0 on success. */ -int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid) +int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *sid, + u32 def_sid, gfp_t gfp_flags) { return security_context_to_sid_core(scontext, scontext_len, - sid, def_sid); + sid, def_sid, gfp_flags); } static int compute_sid_handle_invalid_context( From 4c3b01f71181a52ab7735a7c52b1aa2232826075 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 6 Apr 2008 20:40:17 -0400 Subject: [PATCH 067/187] pvrusb2: fix broken build due to patch order dependency Fix broken build due to patch order dependency. A future patch requires the lines that break the current build. Disable those lines for now. Signed-off-by: Michael Krufky Acked-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 98557ce950cd..fe9991c10cf4 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -175,12 +175,16 @@ static const struct pvr2_device_desc pvr2_device_73xxx = { .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx), .flag_has_cx25840 = !0, .flag_has_hauppauge_rom = !0, +#if 0 .flag_has_analogtuner = !0, .flag_has_composite = !0, .flag_has_svideo = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, +#else + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, +#endif }; From daeba89d43af0fa469d38a4ccdc32fff8ca17c2e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 31 Mar 2008 17:02:02 -0400 Subject: [PATCH 068/187] SUNRPC: don't call flush_dcache_page() with an invalid pointer Fix a problem in _copy_to_pages(), whereby it may call flush_dcache_page() with an invalid pointer due to the fact that 'pgto' gets incremented beyond the end of the page array. Fix is to exit the loop without this unnecessary increment of pgto. Signed-off-by: Trond Myklebust --- net/sunrpc/xdr.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c index 995c3fdc16c2..79a55d56cc98 100644 --- a/net/sunrpc/xdr.c +++ b/net/sunrpc/xdr.c @@ -244,7 +244,7 @@ _copy_to_pages(struct page **pages, size_t pgbase, const char *p, size_t len) pgto = pages + (pgbase >> PAGE_CACHE_SHIFT); pgbase &= ~PAGE_CACHE_MASK; - do { + for (;;) { copy = PAGE_CACHE_SIZE - pgbase; if (copy > len) copy = len; @@ -253,6 +253,10 @@ _copy_to_pages(struct page **pages, size_t pgbase, const char *p, size_t len) memcpy(vto + pgbase, p, copy); kunmap_atomic(vto, KM_USER0); + len -= copy; + if (len == 0) + break; + pgbase += copy; if (pgbase == PAGE_CACHE_SIZE) { flush_dcache_page(*pgto); @@ -260,8 +264,7 @@ _copy_to_pages(struct page **pages, size_t pgbase, const char *p, size_t len) pgto++; } p += copy; - - } while ((len -= copy) != 0); + } flush_dcache_page(*pgto); } From 66d3aac04175c35564cc5982934b68bc4f89a76d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 31 Mar 2008 15:01:58 -0400 Subject: [PATCH 069/187] NFS: initialize flags field in nfs_open_context The nfs_open_context struct had a "flags" field added recently, but the allocator isn't initializing it. It also looks like the allocator isn't initializing the mode or list either, but they seem to be overwritten by the caller, so that's less of an issue. Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index a4c7cf2bff3a..6f88d7c77ac9 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -506,6 +506,7 @@ static struct nfs_open_context *alloc_nfs_open_context(struct vfsmount *mnt, str ctx->cred = get_rpccred(cred); ctx->state = NULL; ctx->lockowner = current->files; + ctx->flags = 0; ctx->error = 0; ctx->dir_cookie = 0; atomic_set(&ctx->count, 1); From 240ee831187e000704cba3208ef6b0a8ad49bd64 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Tue, 1 Apr 2008 20:23:39 -0700 Subject: [PATCH 070/187] fix bug - executing FDPIC ELF on NFS mount triggers BUG() at mm/nommu.c:862:/do_mmap_private() NFS needs a NOMMU version mmap function to support uClinux on NOMMU machine http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_id=141&tracker_item_id=3992 Signed-off-by: Bryan Wu Cc: Mike Frysinger Signed-off-by: Trond Myklebust --- fs/nfs/file.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index ef57a5ae5904..5d2e9d9a4e28 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -64,7 +64,11 @@ const struct file_operations nfs_file_operations = { .write = do_sync_write, .aio_read = nfs_file_read, .aio_write = nfs_file_write, +#ifdef CONFIG_MMU .mmap = nfs_file_mmap, +#else + .mmap = generic_file_mmap, +#endif .open = nfs_file_open, .flush = nfs_file_flush, .release = nfs_file_release, From ed13c27e546667fb0967ae30f5070cd7f6455f90 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 Apr 2008 16:52:44 -0400 Subject: [PATCH 071/187] SUNRPC: Fix a memory leak in rpc_create() Commit 510deb0d was supposed to move the xprt_create_transport() call in rpc_create(), but neglected to remove the old call site. This resulted in a transport leak after every rpc_create() call. This leak is present in 2.6.24 and 2.6.25. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 8c6a7f1a25e9..8834d68972cb 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -261,10 +261,6 @@ struct rpc_clnt *rpc_create(struct rpc_create_args *args) }; char servername[48]; - xprt = xprt_create_transport(&xprtargs); - if (IS_ERR(xprt)) - return (struct rpc_clnt *)xprt; - /* * If the caller chooses not to specify a hostname, whip * up a string representation of the passed-in address. From ef45cb624b9517f71ad6c61299478c2cc08e4d98 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Tue, 8 Apr 2008 17:41:51 -0700 Subject: [PATCH 072/187] ub: remove BUG() after __blk_end_request and fix the condition causing it When __blk_end_request returns nonzero, it means that the request was not completely processed and some BIOs are still attached. Since we have dequeued it by that time, it means leaking requests and hanging processes, which is why BUG() was in there. In ub this happens if a packet request ends normally, but with residue (e.g. when scsi_id issues INQUIRY). The fix is to make sure that arguments passed to __blk_end_request are correct: the full request length and not just transferred length. The transferred length is indicated to applications by adjusting rq->data_len with old, unchanged code outside of this patch. Signed-off-by: Pete Zaitcev Cc: Kiyoshi Ueda Cc: Greg KH Cc: Boaz Harrosh Cc: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/ub.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index c452e2d355ee..27bfe72aab59 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -8,6 +8,7 @@ * and is not licensed separately. See file COPYING for details. * * TODO (sorted by decreasing priority) + * -- Return sense now that rq allows it (we always auto-sense anyway). * -- set readonly flag for CDs, set removable flag for CF readers * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch) * -- verify the 13 conditions and do bulk resets @@ -359,7 +360,8 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, struct ub_scsi_cmd *cmd, struct ub_request *urq); static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd); -static void ub_end_rq(struct request *rq, unsigned int status); +static void ub_end_rq(struct request *rq, unsigned int status, + unsigned int cmd_len); static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, struct ub_request *urq, struct ub_scsi_cmd *cmd); static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd); @@ -642,13 +644,13 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) if (atomic_read(&sc->poison)) { blkdev_dequeue_request(rq); - ub_end_rq(rq, DID_NO_CONNECT << 16); + ub_end_rq(rq, DID_NO_CONNECT << 16, blk_rq_bytes(rq)); return 0; } if (lun->changed && !blk_pc_request(rq)) { blkdev_dequeue_request(rq); - ub_end_rq(rq, SAM_STAT_CHECK_CONDITION); + ub_end_rq(rq, SAM_STAT_CHECK_CONDITION, blk_rq_bytes(rq)); return 0; } @@ -701,7 +703,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) drop: ub_put_cmd(lun, cmd); - ub_end_rq(rq, DID_ERROR << 16); + ub_end_rq(rq, DID_ERROR << 16, blk_rq_bytes(rq)); return 0; } @@ -770,6 +772,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) struct ub_request *urq = cmd->back; struct request *rq; unsigned int scsi_status; + unsigned int cmd_len; rq = urq->rq; @@ -779,8 +782,18 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rq->data_len = 0; else rq->data_len -= cmd->act_len; + scsi_status = 0; + } else { + if (cmd->act_len != cmd->len) { + if ((cmd->key == MEDIUM_ERROR || + cmd->key == UNIT_ATTENTION) && + ub_rw_cmd_retry(sc, lun, urq, cmd) == 0) + return; + scsi_status = SAM_STAT_CHECK_CONDITION; + } else { + scsi_status = 0; + } } - scsi_status = 0; } else { if (blk_pc_request(rq)) { /* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */ @@ -801,14 +814,17 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) urq->rq = NULL; + cmd_len = cmd->len; ub_put_cmd(lun, cmd); - ub_end_rq(rq, scsi_status); + ub_end_rq(rq, scsi_status, cmd_len); blk_start_queue(lun->disk->queue); } -static void ub_end_rq(struct request *rq, unsigned int scsi_status) +static void ub_end_rq(struct request *rq, unsigned int scsi_status, + unsigned int cmd_len) { int error; + long rqlen; if (scsi_status == 0) { error = 0; @@ -816,8 +832,12 @@ static void ub_end_rq(struct request *rq, unsigned int scsi_status) error = -EIO; rq->errors = scsi_status; } - if (__blk_end_request(rq, error, blk_rq_bytes(rq))) - BUG(); + rqlen = blk_rq_bytes(rq); /* Oddly enough, this is the residue. */ + if (__blk_end_request(rq, error, cmd_len)) { + printk(KERN_WARNING DRV_NAME + ": __blk_end_request blew, %s-cmd total %u rqlen %ld\n", + blk_pc_request(rq)? "pc": "fs", cmd_len, rqlen); + } } static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun, From bb070e43497d4fcfea7d8b52003fe1376c218343 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Tue, 8 Apr 2008 17:41:52 -0700 Subject: [PATCH 073/187] acpi thermal: fix result check thermal_zone_device_register() uses the ERR_PTR macro on its return values. A correct check is to use the IS_ERR() macro. The 2.6.25 kernels panic on Compaq AP550 without this patch as it has more then 10 (THERMAL_MAX_TRIPS) trip points (there are 12). Signed-off-by: Krzysztof Helt Cc: "Rafael J. Wysocki" Cc: Len Brown Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index c4e00ac8ea85..1bcecc7dd2ca 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1125,7 +1125,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) tz->trips.active[i].flags.valid; i++, trips++); tz->thermal_zone = thermal_zone_device_register("ACPI thermal zone", trips, tz, &acpi_thermal_zone_ops); - if (!tz->thermal_zone) + if (IS_ERR(tz->thermal_zone)) return -ENODEV; result = sysfs_create_link(&tz->device->dev.kobj, From 41e3355de052693c7a0cad74b845148d262edadf Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 8 Apr 2008 17:41:54 -0700 Subject: [PATCH 074/187] memcg: fix node_state handling This should be N_NORMAL_MEMORY. N_NORMAL_MEMORY is "true" if a node has memory for the kernel. N_HIGH_MEMORY is "true" if a node has memory for HIGHMEM. (If CONFIG_HIGHMEM=n, always "true") This check is used for testing whether we can use kmalloc_node() on a node. Then, if there is a node which only contains HIGHMEM, the system will call kmalloc_node() which doesn't contain memory for the kernel. If it happens under SLUB, the kernel will panic. I think this only happens on x86_32-numa. Signed-off-by: KAMEZAWA Hiroyuki Cc: Balbir Singh Cc: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 23b5fa4cabd8..2e0bfc93484b 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -978,7 +978,7 @@ static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *mem, int node) { struct mem_cgroup_per_node *pn; struct mem_cgroup_per_zone *mz; - int zone; + int zone, tmp = node; /* * This routine is called against possible nodes. * But it's BUG to call kmalloc() against offline node. @@ -987,10 +987,9 @@ static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *mem, int node) * never be onlined. It's better to use memory hotplug callback * function. */ - if (node_state(node, N_HIGH_MEMORY)) - pn = kmalloc_node(sizeof(*pn), GFP_KERNEL, node); - else - pn = kmalloc(sizeof(*pn), GFP_KERNEL); + if (!node_state(node, N_NORMAL_MEMORY)) + tmp = -1; + pn = kmalloc_node(sizeof(*pn), GFP_KERNEL, tmp); if (!pn) return 1; From 4b47c971dc947cadecc20dc7681037e96ece520e Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 8 Apr 2008 17:41:55 -0700 Subject: [PATCH 075/187] es1968: fix sleep-while-holding-lock bug snd_es1968_ac97_read() calls snd_es1968_ac97_wait() first outside a locked area, and later, while holding a lock. snd_es1968_ac97_wait() has a polling loop with a cond_resched() inside it.. which sleeps, so the second call is invalid. This patch adds a version of the wait function that just pure polls. While this is not very elegant in principle, it's very likely the easiest thing to do here, we already checked if the chip was ready (while yielding) just before, so it is very unlikely to take a long time here. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Arjan van de Ven Cc: Jaroslav Kysela Cc: Takashi Iwai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- sound/pci/es1968.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c index 25ccfce45759..7d911a18c082 100644 --- a/sound/pci/es1968.c +++ b/sound/pci/es1968.c @@ -617,6 +617,18 @@ static int snd_es1968_ac97_wait(struct es1968 *chip) return 1; /* timeout */ } +static int snd_es1968_ac97_wait_poll(struct es1968 *chip) +{ + int timeout = 100000; + + while (timeout-- > 0) { + if (!(inb(chip->io_port + ESM_AC97_INDEX) & 1)) + return 0; + } + snd_printd("es1968: ac97 timeout\n"); + return 1; /* timeout */ +} + static void snd_es1968_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val) { struct es1968 *chip = ac97->private_data; @@ -645,7 +657,7 @@ static unsigned short snd_es1968_ac97_read(struct snd_ac97 *ac97, unsigned short outb(reg | 0x80, chip->io_port + ESM_AC97_INDEX); /*msleep(1);*/ - if (! snd_es1968_ac97_wait(chip)) { + if (!snd_es1968_ac97_wait_poll(chip)) { data = inw(chip->io_port + ESM_AC97_DATA); /*msleep(1);*/ } From ba62b077871a5255e271f4fdae57167651839277 Mon Sep 17 00:00:00 2001 From: Alok Kataria Date: Tue, 8 Apr 2008 17:41:56 -0700 Subject: [PATCH 076/187] acpi: fix "buggy BIOS check" when CPUs are hot removed Fixes a BUG in ACPI hotplugging. processor_device_array[pr->id] needs to be set to NULL when removing a CPU. Else the "buggy BIOS check" in acpi_processor_start mistakenly fires when a CPU is removed from the system and then later re-added. Signed-off-by: Alok N Kataria Signed-off-by: Dan Arai Cc: Len Brown Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/processor_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 36a68fa114e3..a825b431b64f 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -822,7 +822,7 @@ static int acpi_processor_remove(struct acpi_device *device, int type) } processors[pr->id] = NULL; - + processor_device_array[pr->id] = NULL; kfree(pr); return 0; From 4fb98efacffd3dfbe8e3b9cb054dd71bab715065 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 8 Apr 2008 17:41:57 -0700 Subject: [PATCH 077/187] spi: spi_bfin5xx build fix Fix breakage cause by overzealous line wrapping; there should be only one format string. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_bfin5xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index d853fceb6bf0..c93c9d6d52e9 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -713,8 +713,8 @@ static void pump_transfers(unsigned long data) } else { drv_data->len = transfer->len; } - dev_dbg(&drv_data->pdev->dev, "transfer: ", - "drv_data->write is %p, chip->write is %p, null_wr is %p\n", + dev_dbg(&drv_data->pdev->dev, + "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n", drv_data->write, chip->write, null_writer); /* speed and width has been set on per message */ From f9e522caece074b9a985436d611127e8e96ad446 Mon Sep 17 00:00:00 2001 From: Vitja Makarov Date: Tue, 8 Apr 2008 17:41:57 -0700 Subject: [PATCH 078/187] spi: spi_bfin5xx: fix probe() sequencing Fix bug in SPI probe: first initialize peripheral pins, and just after register spi master device. This fixes problems with SPI drivers built-in kernel. Singed-off-by: Vitja Makarov Signed-off-by: Bryan Wu Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_bfin5xx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index c93c9d6d52e9..a4bf3af7a157 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1294,6 +1294,12 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev) goto out_error_queue_alloc; } + status = peripheral_request_list(drv_data->pin_req, DRV_NAME); + if (status != 0) { + dev_err(&pdev->dev, ": Requesting Peripherals failed\n"); + goto out_error_queue_alloc; + } + /* Register with the SPI framework */ platform_set_drvdata(pdev, drv_data); status = spi_register_master(master); @@ -1302,12 +1308,6 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev) goto out_error_queue_alloc; } - status = peripheral_request_list(drv_data->pin_req, DRV_NAME); - if (status != 0) { - dev_err(&pdev->dev, ": Requesting Peripherals failed\n"); - goto out_error; - } - dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n", DRV_DESC, DRV_VERSION, drv_data->regs_base, drv_data->dma_channel); From 6395bee7e92bf34e95dc67c1da5acc30e8b98244 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 8 Apr 2008 17:41:58 -0700 Subject: [PATCH 079/187] spi: documentation tweaks Update SPI documentation to clarify some areas of recent confusion: clock polarity takes effect when chipselect goes active; and zero length buffers are OK in certain cases. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/spi/spi-summary | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 8861e47e5a2d..6d5f18143c50 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -116,6 +116,13 @@ low order bit. So when a chip's timing diagram shows the clock starting low (CPOL=0) and data stabilized for sampling during the trailing clock edge (CPHA=1), that's SPI mode 1. +Note that the clock mode is relevant as soon as the chipselect goes +active. So the master must set the clock to inactive before selecting +a slave, and the slave can tell the chosen polarity by sampling the +clock level when its select line goes active. That's why many devices +support for example both modes 0 and 3: they don't care about polarity, +and alway clock data in/out on rising clock edges. + How do these driver programming interfaces work? ------------------------------------------------ @@ -379,8 +386,14 @@ any more such messages. + when bidirectional reads and writes start ... by how its sequence of spi_transfer requests is arranged; + + which I/O buffers are used ... each spi_transfer wraps a + buffer for each transfer direction, supporting full duplex + (two pointers, maybe the same one in both cases) and half + duplex (one pointer is NULL) transfers; + + optionally defining short delays after transfers ... using - the spi_transfer.delay_usecs setting; + the spi_transfer.delay_usecs setting (this delay can be the + only protocol effect, if the buffer length is zero); + whether the chipselect becomes inactive after a transfer and any delay ... by using the spi_transfer.cs_change flag; From b9ad8985f25c158e71844c78277a0c0b3779d0d3 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 8 Apr 2008 17:41:58 -0700 Subject: [PATCH 080/187] spi: spi_bfin5xx: remove unused label Remove unused label, and associated compiler warning. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_bfin5xx.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index a4bf3af7a157..6635e15e5a7a 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1319,7 +1319,6 @@ out_error_no_dma_ch: iounmap((void *) drv_data->regs_base); out_error_ioremap: out_error_get_res: -out_error: spi_master_put(master); return status; From f8e30e447c692aaa728c65930ebc0146f65e1e7b Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Tue, 8 Apr 2008 17:41:59 -0700 Subject: [PATCH 081/187] mtd/chips: add missing set_current_state() to cfi_{amdstd,staa}_sync() cfi_amdstd_sync() and cfi_staa_sync() call schedule() without changing task's state appropriately. In case of e.g. chip->state == FL_ERASING, cfi_*_sync() will be busy-looping either redundantly for a fixed interval of time (for SCHED_NORMAL tasks) or possibly endlessly (for RT tasks and UP). Signed-off-by: Dmitry Adamushko Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mtd/chips/cfi_cmdset_0002.c | 1 + drivers/mtd/chips/cfi_cmdset_0020.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index d072e87ce4e2..458d477614d6 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -1763,6 +1763,7 @@ static void cfi_amdstd_sync (struct mtd_info *mtd) default: /* Not an idle state */ + set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&chip->wq, &wait); spin_unlock(chip->mutex); diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index b344ff858b2d..492e2ab27420 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -1015,6 +1015,7 @@ static void cfi_staa_sync (struct mtd_info *mtd) default: /* Not an idle state */ + set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&chip->wq, &wait); spin_unlock_bh(chip->mutex); From 119b3aa65d33533c2f8d8822bb7a3e62aa12f860 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 9 Apr 2008 07:51:07 +1000 Subject: [PATCH 082/187] pata_sil680: Fix build on arch/ppc Commit 0f436eff54f90419ac1b8accfb3e6e17c4b49a4e breaks build on arch/ppc as it doesn't implement the machine_is() macro. This fixes it by using CONFIG_PPC_MERGE instead which represents arch/powerpc only, while CONFIG_PPC is set for both. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jeff Garzik --- drivers/ata/pata_sil680.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 3988e44f4934..7c5b2dd9a1a1 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -270,7 +270,7 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio) tmpbyte & 1, tmpbyte & 0x30); *try_mmio = 0; -#ifdef CONFIG_PPC +#ifdef CONFIG_PPC_MERGE if (machine_is(cell)) *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5); #endif From ac2c5bd05c88185ecbe7c114e472716f2e2d3a0c Mon Sep 17 00:00:00 2001 From: Johann Felix Soden Date: Sun, 6 Apr 2008 15:10:54 +0200 Subject: [PATCH 083/187] ata/sata_fsl: Remove unused variable in sata_fsl_probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In sata_fsl_probe memory is allocated but never used or deallocated. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10404 Thanks to Daniel Marjamäki for the bug report. Reported-by: Daniel Marjamäki Signed-off-by: Johann Felix Soden Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 4c1985511548..9d1e3cad4aa9 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1256,7 +1256,6 @@ static int sata_fsl_probe(struct of_device *ofdev, void __iomem *ssr_base = NULL; void __iomem *csr_base = NULL; struct sata_fsl_host_priv *host_priv = NULL; - struct resource *r; int irq; struct ata_host *host; @@ -1266,8 +1265,6 @@ static int sata_fsl_probe(struct of_device *ofdev, dev_printk(KERN_INFO, &ofdev->dev, "Sata FSL Platform/CSB Driver init\n"); - r = kmalloc(sizeof(struct resource), GFP_KERNEL); - hcr_base = of_iomap(ofdev->node, 0); if (!hcr_base) goto error_exit_with_cleanup; From 5a55261716e838f188598ab3d7a0abf9cf1338f8 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 9 Apr 2008 14:08:35 -0400 Subject: [PATCH 084/187] SELinux: don't BUG if fs reuses a superblock I (wrongly) assumed that nfs_xdev_get_sb() would not ever share a superblock and so cloning mount options would always be correct. Turns out that isn't the case and we could fall over a BUG_ON() that wasn't a BUG at all. Since there is little we can do to reconcile different mount options this patch just leaves the sb alone and the first set of options wins. Signed-off-by: Eric Paris Acked-by: Stephen Smalley Acked-by: Trond Myklebust Signed-off-by: James Morris --- security/selinux/hooks.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 89bb6d36c0a7..d39b59cf8a08 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -760,13 +760,13 @@ static void selinux_sb_clone_mnt_opts(const struct super_block *oldsb, * this early in the boot process. */ BUG_ON(!ss_initialized); - /* this might go away sometime down the line if there is a new user - * of clone, but for now, nfs better not get here... */ - BUG_ON(newsbsec->initialized); - /* how can we clone if the old one wasn't set up?? */ BUG_ON(!oldsbsec->initialized); + /* if fs is reusing a sb, just let its options stand... */ + if (newsbsec->initialized) + return; + mutex_lock(&newsbsec->lock); newsbsec->flags = oldsbsec->flags; From f4be31ec9690cfe6e94fcbed6ae60a6a38b3c3ed Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 9 Apr 2008 19:04:07 -0400 Subject: [PATCH 085/187] pop previous section in alternative.c gcc expects all toplevel assembly to return to the original section type. The code in alteranative.c does not do this. This caused some strange bugs in sched-devel where code would end up in the .rodata section and when the kernel sets the NX bit on all .rodata, the kernel would crash when executing this code. This patch adds a .previous marker to return the code back to the original section. Credit goes to Andrew Pinski for telling me it wasn't a gcc bug but a bug in the toplevel asm code in the kernel. ;-) Signed-off-by: Steven Rostedt Signed-off-by: Linus Torvalds --- arch/x86/kernel/alternative.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 45d79ea890ae..5fed98ca0e1f 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -65,7 +65,8 @@ __setup("noreplace-paravirt", setup_noreplace_paravirt); get them easily into strings. */ asm("\t.section .rodata, \"a\"\nintelnops: " GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6 - GENERIC_NOP7 GENERIC_NOP8); + GENERIC_NOP7 GENERIC_NOP8 + "\t.previous"); extern const unsigned char intelnops[]; static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = { NULL, @@ -83,7 +84,8 @@ static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = { #ifdef K8_NOP1 asm("\t.section .rodata, \"a\"\nk8nops: " K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6 - K8_NOP7 K8_NOP8); + K8_NOP7 K8_NOP8 + "\t.previous"); extern const unsigned char k8nops[]; static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = { NULL, @@ -101,7 +103,8 @@ static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = { #ifdef K7_NOP1 asm("\t.section .rodata, \"a\"\nk7nops: " K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6 - K7_NOP7 K7_NOP8); + K7_NOP7 K7_NOP8 + "\t.previous"); extern const unsigned char k7nops[]; static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = { NULL, @@ -119,7 +122,8 @@ static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = { #ifdef P6_NOP1 asm("\t.section .rodata, \"a\"\np6nops: " P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6 - P6_NOP7 P6_NOP8); + P6_NOP7 P6_NOP8 + "\t.previous"); extern const unsigned char p6nops[]; static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = { NULL, From d786a4a6599740eaa4b8d1e1d466853f02db11d4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 9 Apr 2008 19:39:25 -0700 Subject: [PATCH 086/187] [SPARC]: Fix several regset and ptrace bugs. 1) ptrace should pass 'current' to task_user_regset_view() 2) When fetching general registers using a 64-bit view, and the target is 32-bit, we have to convert. 3) Skip the whole register window get/set code block if the user isn't asking to access anything in there. Otherwise we have problems if the user doesn't have an address space setup. Fetching ptrace register is still valid at such a time, and ptrace does not try to access the register window area of the regset. Signed-off-by: David S. Miller --- arch/sparc/kernel/ptrace.c | 2 +- arch/sparc64/kernel/ptrace.c | 148 +++++++++++++++++++++++------------ 2 files changed, 98 insertions(+), 52 deletions(-) diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c index 5b54f11f4e59..7f44ae69b29e 100644 --- a/arch/sparc/kernel/ptrace.c +++ b/arch/sparc/kernel/ptrace.c @@ -325,7 +325,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) const struct user_regset_view *view; int ret; - view = task_user_regset_view(child); + view = task_user_regset_view(current); switch(request) { case PTRACE_GETREGS: { diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index 7963595c77cc..e9fc0aa2da38 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -114,6 +114,85 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page, preempt_enable(); } +static int get_from_target(struct task_struct *target, unsigned long uaddr, + void *kbuf, int len) +{ + if (target == current) { + if (copy_from_user(kbuf, (void __user *) uaddr, len)) + return -EFAULT; + } else { + int len2 = access_process_vm(target, uaddr, kbuf, len, 0); + if (len2 != len) + return -EFAULT; + } + return 0; +} + +static int set_to_target(struct task_struct *target, unsigned long uaddr, + void *kbuf, int len) +{ + if (target == current) { + if (copy_to_user((void __user *) uaddr, kbuf, len)) + return -EFAULT; + } else { + int len2 = access_process_vm(target, uaddr, kbuf, len, 1); + if (len2 != len) + return -EFAULT; + } + return 0; +} + +static int regwindow64_get(struct task_struct *target, + const struct pt_regs *regs, + struct reg_window *wbuf) +{ + unsigned long rw_addr = regs->u_regs[UREG_I6]; + + if (test_tsk_thread_flag(current, TIF_32BIT)) { + struct reg_window32 win32; + int i; + + if (get_from_target(target, rw_addr, &win32, sizeof(win32))) + return -EFAULT; + for (i = 0; i < 8; i++) + wbuf->locals[i] = win32.locals[i]; + for (i = 0; i < 8; i++) + wbuf->ins[i] = win32.ins[i]; + } else { + rw_addr += STACK_BIAS; + if (get_from_target(target, rw_addr, wbuf, sizeof(*wbuf))) + return -EFAULT; + } + + return 0; +} + +static int regwindow64_set(struct task_struct *target, + const struct pt_regs *regs, + struct reg_window *wbuf) +{ + unsigned long rw_addr = regs->u_regs[UREG_I6]; + + if (test_tsk_thread_flag(current, TIF_32BIT)) { + struct reg_window32 win32; + int i; + + for (i = 0; i < 8; i++) + win32.locals[i] = wbuf->locals[i]; + for (i = 0; i < 8; i++) + win32.ins[i] = wbuf->ins[i]; + + if (set_to_target(target, rw_addr, &win32, sizeof(win32))) + return -EFAULT; + } else { + rw_addr += STACK_BIAS; + if (set_to_target(target, rw_addr, wbuf, sizeof(*wbuf))) + return -EFAULT; + } + + return 0; +} + enum sparc_regset { REGSET_GENERAL, REGSET_FP, @@ -133,25 +212,13 @@ static int genregs64_get(struct task_struct *target, ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, regs->u_regs, 0, 16 * sizeof(u64)); - if (!ret) { - unsigned long __user *reg_window = (unsigned long __user *) - (regs->u_regs[UREG_I6] + STACK_BIAS); - unsigned long window[16]; - - if (target == current) { - if (copy_from_user(window, reg_window, sizeof(window))) - return -EFAULT; - } else { - if (access_process_vm(target, - (unsigned long) reg_window, - window, - sizeof(window), 0) != - sizeof(window)) - return -EFAULT; - } + if (!ret && count && pos < (32 * sizeof(u64))) { + struct reg_window window; + if (regwindow64_get(target, regs, &window)) + return -EFAULT; ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - window, + &window, 16 * sizeof(u64), 32 * sizeof(u64)); } @@ -173,10 +240,11 @@ static int genregs64_get(struct task_struct *target, 36 * sizeof(u64)); } - if (!ret) + if (!ret) { ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, 36 * sizeof(u64), -1); + } return ret; } @@ -194,42 +262,20 @@ static int genregs64_set(struct task_struct *target, ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, regs->u_regs, 0, 16 * sizeof(u64)); - if (!ret && count > 0) { - unsigned long __user *reg_window = (unsigned long __user *) - (regs->u_regs[UREG_I6] + STACK_BIAS); - unsigned long window[16]; + if (!ret && count && pos < (32 * sizeof(u64))) { + struct reg_window window; - if (target == current) { - if (copy_from_user(window, reg_window, sizeof(window))) - return -EFAULT; - } else { - if (access_process_vm(target, - (unsigned long) reg_window, - window, - sizeof(window), 0) != - sizeof(window)) - return -EFAULT; - } + if (regwindow64_get(target, regs, &window)) + return -EFAULT; ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - window, + &window, 16 * sizeof(u64), 32 * sizeof(u64)); - if (!ret) { - if (target == current) { - if (copy_to_user(reg_window, window, - sizeof(window))) - return -EFAULT; - } else { - if (access_process_vm(target, - (unsigned long) - reg_window, - window, - sizeof(window), 1) != - sizeof(window)) - return -EFAULT; - } - } + + if (!ret && + regwindow64_set(target, regs, &window)) + return -EFAULT; } if (!ret && count > 0) { @@ -805,7 +851,7 @@ struct compat_fps { long compat_arch_ptrace(struct task_struct *child, compat_long_t request, compat_ulong_t caddr, compat_ulong_t cdata) { - const struct user_regset_view *view = task_user_regset_view(child); + const struct user_regset_view *view = task_user_regset_view(current); compat_ulong_t caddr2 = task_pt_regs(current)->u_regs[UREG_I4]; struct pt_regs32 __user *pregs; struct compat_fps __user *fps; @@ -913,7 +959,7 @@ struct fps { long arch_ptrace(struct task_struct *child, long request, long addr, long data) { - const struct user_regset_view *view = task_user_regset_view(child); + const struct user_regset_view *view = task_user_regset_view(current); unsigned long addr2 = task_pt_regs(current)->u_regs[UREG_I4]; struct pt_regs __user *pregs; struct fps __user *fps; From 8191ecd1d14c6914c660dfa007154860a7908857 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 10 Apr 2008 08:24:25 +0200 Subject: [PATCH 087/187] splice: fix infinite loop in generic_file_splice_read() There's a quirky loop in generic_file_splice_read() that could go on indefinitely, if the file splice returns 0 permanently (and not just as a temporary condition). Get rid of the loop and pass back -EAGAIN correctly from __generic_file_splice_read(), so we handle that condition properly as well. Signed-off-by: Jens Axboe --- fs/splice.c | 31 ++++++------------------------- 1 file changed, 6 insertions(+), 25 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index a861bb318ac8..eeb1a86a7014 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -370,8 +370,10 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, * for an in-flight io page */ if (flags & SPLICE_F_NONBLOCK) { - if (TestSetPageLocked(page)) + if (TestSetPageLocked(page)) { + error = -EAGAIN; break; + } } else lock_page(page); @@ -479,9 +481,8 @@ ssize_t generic_file_splice_read(struct file *in, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags) { - ssize_t spliced; - int ret; loff_t isize, left; + int ret; isize = i_size_read(in->f_mapping->host); if (unlikely(*ppos >= isize)) @@ -491,29 +492,9 @@ ssize_t generic_file_splice_read(struct file *in, loff_t *ppos, if (unlikely(left < len)) len = left; - ret = 0; - spliced = 0; - while (len && !spliced) { - ret = __generic_file_splice_read(in, ppos, pipe, len, flags); - - if (ret < 0) - break; - else if (!ret) { - if (spliced) - break; - if (flags & SPLICE_F_NONBLOCK) { - ret = -EAGAIN; - break; - } - } - + ret = __generic_file_splice_read(in, ppos, pipe, len, flags); + if (ret > 0) *ppos += ret; - len -= ret; - spliced += ret; - } - - if (spliced) - return spliced; return ret; } From 6211870992502efdccf9cd6bae155c83277835fa Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Thu, 6 Mar 2008 13:44:28 +1100 Subject: [PATCH 088/187] [XFS] remove shouting-indirection macros from xfs_sb.h Remove macro-to-small-function indirection from xfs_sb.h, and remove some which are completely unused. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30528a Signed-off-by: Eric Sandeen Signed-off-by: Donald Douwsma Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 2 +- fs/xfs/quota/xfs_qm.c | 6 +-- fs/xfs/quota/xfs_qm_bhv.c | 2 +- fs/xfs/quota/xfs_qm_syscalls.c | 4 +- fs/xfs/xfs_attr_leaf.c | 6 +-- fs/xfs/xfs_bmap.c | 18 ++++----- fs/xfs/xfs_bmap_btree.h | 2 +- fs/xfs/xfs_dir2.c | 2 +- fs/xfs/xfs_fsops.c | 24 ++++++------ fs/xfs/xfs_ialloc.c | 6 +-- fs/xfs/xfs_inode.c | 6 +-- fs/xfs/xfs_inode_item.c | 4 +- fs/xfs/xfs_itable.c | 2 +- fs/xfs/xfs_log.c | 14 +++---- fs/xfs/xfs_log_priv.h | 4 +- fs/xfs/xfs_log_recover.c | 16 ++++---- fs/xfs/xfs_mount.c | 10 ++--- fs/xfs/xfs_sb.h | 69 ++-------------------------------- fs/xfs/xfs_utils.c | 6 +-- fs/xfs/xfs_vfsops.c | 9 ++--- fs/xfs/xfs_vnodeops.c | 2 +- 21 files changed, 76 insertions(+), 138 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index a9952e490ac9..f34bd010eb51 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -732,7 +732,7 @@ xfs_ioctl( * Only allow the sys admin to reserve space unless * unwritten extents are enabled. */ - if (!XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb) && + if (!xfs_sb_version_hasextflgbit(&mp->m_sb) && !capable(CAP_SYS_ADMIN)) return -EPERM; diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index 1f3da5b8657b..8e9c5ae6504d 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -1405,13 +1405,13 @@ xfs_qm_qino_alloc( #if defined(DEBUG) && defined(XFS_LOUD_RECOVERY) unsigned oldv = mp->m_sb.sb_versionnum; #endif - ASSERT(!XFS_SB_VERSION_HASQUOTA(&mp->m_sb)); + ASSERT(!xfs_sb_version_hasquota(&mp->m_sb)); ASSERT((sbfields & (XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO | XFS_SB_GQUOTINO | XFS_SB_QFLAGS)) == (XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO | XFS_SB_GQUOTINO | XFS_SB_QFLAGS)); - XFS_SB_VERSION_ADDQUOTA(&mp->m_sb); + xfs_sb_version_addquota(&mp->m_sb); mp->m_sb.sb_uquotino = NULLFSINO; mp->m_sb.sb_gquotino = NULLFSINO; @@ -1954,7 +1954,7 @@ xfs_qm_init_quotainos( /* * Get the uquota and gquota inodes */ - if (XFS_SB_VERSION_HASQUOTA(&mp->m_sb)) { + if (xfs_sb_version_hasquota(&mp->m_sb)) { if (XFS_IS_UQUOTA_ON(mp) && mp->m_sb.sb_uquotino != NULLFSINO) { ASSERT(mp->m_sb.sb_uquotino > 0); diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c index 97bb32937585..f4f6c4c861d7 100644 --- a/fs/xfs/quota/xfs_qm_bhv.c +++ b/fs/xfs/quota/xfs_qm_bhv.c @@ -118,7 +118,7 @@ xfs_qm_newmount( *quotaflags = 0; *needquotamount = B_FALSE; - quotaondisk = XFS_SB_VERSION_HASQUOTA(&mp->m_sb) && + quotaondisk = xfs_sb_version_hasquota(&mp->m_sb) && (mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT); if (quotaondisk) { diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 2cc5886cfe85..d2b8be7e75f9 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -377,7 +377,7 @@ xfs_qm_scall_trunc_qfiles( if (!capable(CAP_SYS_ADMIN)) return XFS_ERROR(EPERM); error = 0; - if (!XFS_SB_VERSION_HASQUOTA(&mp->m_sb) || flags == 0) { + if (!xfs_sb_version_hasquota(&mp->m_sb) || flags == 0) { qdprintk("qtrunc flags=%x m_qflags=%x\n", flags, mp->m_qflags); return XFS_ERROR(EINVAL); } @@ -522,7 +522,7 @@ xfs_qm_scall_getqstat( memset(out, 0, sizeof(fs_quota_stat_t)); out->qs_version = FS_QSTAT_VERSION; - if (! XFS_SB_VERSION_HASQUOTA(&mp->m_sb)) { + if (!xfs_sb_version_hasquota(&mp->m_sb)) { out->qs_uquota.qfs_ino = NULLFSINO; out->qs_gquota.qfs_ino = NULLFSINO; return (0); diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index b08e2a2a8add..96ba6aa4ed8c 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -227,10 +227,10 @@ STATIC void xfs_sbversion_add_attr2(xfs_mount_t *mp, xfs_trans_t *tp) { if ((mp->m_flags & XFS_MOUNT_ATTR2) && - !(XFS_SB_VERSION_HASATTR2(&mp->m_sb))) { + !(xfs_sb_version_hasattr2(&mp->m_sb))) { spin_lock(&mp->m_sb_lock); - if (!XFS_SB_VERSION_HASATTR2(&mp->m_sb)) { - XFS_SB_VERSION_ADDATTR2(&mp->m_sb); + if (!xfs_sb_version_hasattr2(&mp->m_sb)) { + xfs_sb_version_addattr2(&mp->m_sb); spin_unlock(&mp->m_sb_lock); xfs_mod_sb(tp, XFS_SB_VERSIONNUM | XFS_SB_FEATURES2); } else diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 1c0a5a585a82..2def273855a2 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -4047,17 +4047,17 @@ xfs_bmap_add_attrfork( xfs_trans_log_inode(tp, ip, logflags); if (error) goto error2; - if (!XFS_SB_VERSION_HASATTR(&mp->m_sb) || - (!XFS_SB_VERSION_HASATTR2(&mp->m_sb) && version == 2)) { + if (!xfs_sb_version_hasattr(&mp->m_sb) || + (!xfs_sb_version_hasattr2(&mp->m_sb) && version == 2)) { __int64_t sbfields = 0; spin_lock(&mp->m_sb_lock); - if (!XFS_SB_VERSION_HASATTR(&mp->m_sb)) { - XFS_SB_VERSION_ADDATTR(&mp->m_sb); + if (!xfs_sb_version_hasattr(&mp->m_sb)) { + xfs_sb_version_addattr(&mp->m_sb); sbfields |= XFS_SB_VERSIONNUM; } - if (!XFS_SB_VERSION_HASATTR2(&mp->m_sb) && version == 2) { - XFS_SB_VERSION_ADDATTR2(&mp->m_sb); + if (!xfs_sb_version_hasattr2(&mp->m_sb) && version == 2) { + xfs_sb_version_addattr2(&mp->m_sb); sbfields |= (XFS_SB_VERSIONNUM | XFS_SB_FEATURES2); } if (sbfields) { @@ -5043,7 +5043,7 @@ xfs_bmapi( * A wasdelay extent has been initialized, so * shouldn't be flagged as unwritten. */ - if (wr && XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) { + if (wr && xfs_sb_version_hasextflgbit(&mp->m_sb)) { if (!wasdelay && (flags & XFS_BMAPI_PREALLOC)) got.br_state = XFS_EXT_UNWRITTEN; } @@ -5483,7 +5483,7 @@ xfs_bunmapi( * get rid of part of a realtime extent. */ if (del.br_state == XFS_EXT_UNWRITTEN || - !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) { + !xfs_sb_version_hasextflgbit(&mp->m_sb)) { /* * This piece is unwritten, or we're not * using unwritten extents. Skip over it. @@ -5535,7 +5535,7 @@ xfs_bunmapi( } else if ((del.br_startoff == start && (del.br_state == XFS_EXT_UNWRITTEN || xfs_trans_get_block_res(tp) == 0)) || - !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) { + !xfs_sb_version_hasextflgbit(&mp->m_sb)) { /* * Can't make it unwritten. There isn't * a full extent here so just skip it. diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h index 2d950e975918..cd0d4b4bb816 100644 --- a/fs/xfs/xfs_bmap_btree.h +++ b/fs/xfs/xfs_bmap_btree.h @@ -120,7 +120,7 @@ typedef enum { * Extent state and extent format macros. */ #define XFS_EXTFMT_INODE(x) \ - (XFS_SB_VERSION_HASEXTFLGBIT(&((x)->i_mount->m_sb)) ? \ + (xfs_sb_version_hasextflgbit(&((x)->i_mount->m_sb)) ? \ XFS_EXTFMT_HASSTATE : XFS_EXTFMT_NOSTATE) #define ISUNWRITTEN(x) ((x)->br_state == XFS_EXT_UNWRITTEN) diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index be7c4251fa61..e92e73f0e6af 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -49,7 +49,7 @@ void xfs_dir_mount( xfs_mount_t *mp) { - ASSERT(XFS_SB_VERSION_HASDIRV2(&mp->m_sb)); + ASSERT(xfs_sb_version_hasdirv2(&mp->m_sb)); ASSERT((1 << (mp->m_sb.sb_blocklog + mp->m_sb.sb_dirblklog)) <= XFS_MAX_BLOCKSIZE); mp->m_dirblksize = 1 << (mp->m_sb.sb_blocklog + mp->m_sb.sb_dirblklog); diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index eadc1591c795..d3a0f538d6a6 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -77,36 +77,36 @@ xfs_fs_geometry( if (new_version >= 3) { geo->version = XFS_FSOP_GEOM_VERSION; geo->flags = - (XFS_SB_VERSION_HASATTR(&mp->m_sb) ? + (xfs_sb_version_hasattr(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_ATTR : 0) | - (XFS_SB_VERSION_HASNLINK(&mp->m_sb) ? + (xfs_sb_version_hasnlink(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_NLINK : 0) | - (XFS_SB_VERSION_HASQUOTA(&mp->m_sb) ? + (xfs_sb_version_hasquota(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_QUOTA : 0) | - (XFS_SB_VERSION_HASALIGN(&mp->m_sb) ? + (xfs_sb_version_hasalign(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_IALIGN : 0) | - (XFS_SB_VERSION_HASDALIGN(&mp->m_sb) ? + (xfs_sb_version_hasdalign(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_DALIGN : 0) | - (XFS_SB_VERSION_HASSHARED(&mp->m_sb) ? + (xfs_sb_version_hasshared(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_SHARED : 0) | - (XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb) ? + (xfs_sb_version_hasextflgbit(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_EXTFLG : 0) | - (XFS_SB_VERSION_HASDIRV2(&mp->m_sb) ? + (xfs_sb_version_hasdirv2(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_DIRV2 : 0) | - (XFS_SB_VERSION_HASSECTOR(&mp->m_sb) ? + (xfs_sb_version_hassector(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_SECTOR : 0) | (xfs_sb_version_haslazysbcount(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_LAZYSB : 0) | - (XFS_SB_VERSION_HASATTR2(&mp->m_sb) ? + (xfs_sb_version_hasattr2(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_ATTR2 : 0); - geo->logsectsize = XFS_SB_VERSION_HASSECTOR(&mp->m_sb) ? + geo->logsectsize = xfs_sb_version_hassector(&mp->m_sb) ? mp->m_sb.sb_logsectsize : BBSIZE; geo->rtsectsize = mp->m_sb.sb_blocksize; geo->dirblocksize = mp->m_dirblksize; } if (new_version >= 4) { geo->flags |= - (XFS_SB_VERSION_HASLOGV2(&mp->m_sb) ? + (xfs_sb_version_haslogv2(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_LOGV2 : 0); geo->logsunit = mp->m_sb.sb_logsunit; } diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index db9d5fa600af..5a146cb22980 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -191,7 +191,7 @@ xfs_ialloc_ag_alloc( ASSERT(!(args.mp->m_flags & XFS_MOUNT_NOALIGN)); args.alignment = args.mp->m_dalign; isaligned = 1; - } else if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) && + } else if (xfs_sb_version_hasalign(&args.mp->m_sb) && args.mp->m_sb.sb_inoalignmt >= XFS_B_TO_FSBT(args.mp, XFS_INODE_CLUSTER_SIZE(args.mp))) @@ -230,7 +230,7 @@ xfs_ialloc_ag_alloc( args.agbno = be32_to_cpu(agi->agi_root); args.fsbno = XFS_AGB_TO_FSB(args.mp, be32_to_cpu(agi->agi_seqno), args.agbno); - if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) && + if (xfs_sb_version_hasalign(&args.mp->m_sb) && args.mp->m_sb.sb_inoalignmt >= XFS_B_TO_FSBT(args.mp, XFS_INODE_CLUSTER_SIZE(args.mp))) args.alignment = args.mp->m_sb.sb_inoalignmt; @@ -271,7 +271,7 @@ xfs_ialloc_ag_alloc( * use the old version so that old kernels will continue to be * able to use the file system. */ - if (XFS_SB_VERSION_HASNLINK(&args.mp->m_sb)) + if (xfs_sb_version_hasnlink(&args.mp->m_sb)) version = XFS_DINODE_VERSION_2; else version = XFS_DINODE_VERSION_1; diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index a550546a7083..f43a6e01d68f 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1147,7 +1147,7 @@ xfs_ialloc( * the inode version number now. This way we only do the conversion * here rather than here and in the flush/logging code. */ - if (XFS_SB_VERSION_HASNLINK(&tp->t_mountp->m_sb) && + if (xfs_sb_version_hasnlink(&tp->t_mountp->m_sb) && ip->i_d.di_version == XFS_DINODE_VERSION_1) { ip->i_d.di_version = XFS_DINODE_VERSION_2; /* @@ -3434,9 +3434,9 @@ xfs_iflush_int( * has been updated, then make the conversion permanent. */ ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 || - XFS_SB_VERSION_HASNLINK(&mp->m_sb)); + xfs_sb_version_hasnlink(&mp->m_sb)); if (ip->i_d.di_version == XFS_DINODE_VERSION_1) { - if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) { + if (!xfs_sb_version_hasnlink(&mp->m_sb)) { /* * Convert it back. */ diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c index 034ca7202295..2c775b4ae9e6 100644 --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -296,9 +296,9 @@ xfs_inode_item_format( */ mp = ip->i_mount; ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 || - XFS_SB_VERSION_HASNLINK(&mp->m_sb)); + xfs_sb_version_hasnlink(&mp->m_sb)); if (ip->i_d.di_version == XFS_DINODE_VERSION_1) { - if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) { + if (!xfs_sb_version_hasnlink(&mp->m_sb)) { /* * Convert it back. */ diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index 658aab6b1bbf..f615e04364f4 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -45,7 +45,7 @@ xfs_internal_inum( xfs_ino_t ino) { return (ino == mp->m_sb.sb_rbmino || ino == mp->m_sb.sb_rsumino || - (XFS_SB_VERSION_HASQUOTA(&mp->m_sb) && + (xfs_sb_version_hasquota(&mp->m_sb) && (ino == mp->m_sb.sb_uquotino || ino == mp->m_sb.sb_gquotino))); } diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index a75edca1860f..31f2b04f2c97 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -1090,7 +1090,7 @@ xlog_get_iclog_buffer_size(xfs_mount_t *mp, size >>= 1; } - if (XFS_SB_VERSION_HASLOGV2(&mp->m_sb)) { + if (xfs_sb_version_haslogv2(&mp->m_sb)) { /* # headers = size / 32K * one header holds cycles from 32K of data */ @@ -1186,13 +1186,13 @@ xlog_alloc_log(xfs_mount_t *mp, log->l_grant_reserve_cycle = 1; log->l_grant_write_cycle = 1; - if (XFS_SB_VERSION_HASSECTOR(&mp->m_sb)) { + if (xfs_sb_version_hassector(&mp->m_sb)) { log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT; ASSERT(log->l_sectbb_log <= mp->m_sectbb_log); /* for larger sector sizes, must have v2 or external log */ ASSERT(log->l_sectbb_log == 0 || log->l_logBBstart == 0 || - XFS_SB_VERSION_HASLOGV2(&mp->m_sb)); + xfs_sb_version_haslogv2(&mp->m_sb)); ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT); } log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1; @@ -1247,7 +1247,7 @@ xlog_alloc_log(xfs_mount_t *mp, memset(head, 0, sizeof(xlog_rec_header_t)); head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM); head->h_version = cpu_to_be32( - XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? 2 : 1); + xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1); head->h_size = cpu_to_be32(log->l_iclog_size); /* new fields */ head->h_fmt = cpu_to_be32(XLOG_FMT); @@ -1402,7 +1402,7 @@ xlog_sync(xlog_t *log, int roundoff; /* roundoff to BB or stripe */ int split = 0; /* split write into two regions */ int error; - int v2 = XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb); + int v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb); XFS_STATS_INC(xs_log_writes); ASSERT(iclog->ic_refcnt == 0); @@ -2881,7 +2881,7 @@ xlog_state_switch_iclogs(xlog_t *log, log->l_curr_block += BTOBB(eventual_size)+BTOBB(log->l_iclog_hsize); /* Round up to next log-sunit */ - if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) && + if (xfs_sb_version_haslogv2(&log->l_mp->m_sb) && log->l_mp->m_sb.sb_logsunit > 1) { __uint32_t sunit_bb = BTOBB(log->l_mp->m_sb.sb_logsunit); log->l_curr_block = roundup(log->l_curr_block, sunit_bb); @@ -3334,7 +3334,7 @@ xlog_ticket_get(xlog_t *log, unit_bytes += sizeof(xlog_op_header_t) * num_headers; /* for roundoff padding for transaction data and one for commit record */ - if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) && + if (xfs_sb_version_haslogv2(&log->l_mp->m_sb) && log->l_mp->m_sb.sb_logsunit > 1) { /* log su roundoff */ unit_bytes += 2*log->l_mp->m_sb.sb_logsunit; diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h index e008233ee249..c6244cc733c0 100644 --- a/fs/xfs/xfs_log_priv.h +++ b/fs/xfs/xfs_log_priv.h @@ -49,10 +49,10 @@ struct xfs_mount; #define XLOG_HEADER_SIZE 512 #define XLOG_REC_SHIFT(log) \ - BTOBB(1 << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \ + BTOBB(1 << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \ XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) #define XLOG_TOTAL_REC_SHIFT(log) \ - BTOBB(XLOG_MAX_ICLOGS << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \ + BTOBB(XLOG_MAX_ICLOGS << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \ XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index b82d5d4d2462..b2b70eba282c 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -478,7 +478,7 @@ xlog_find_verify_log_record( * reset last_blk. Only when last_blk points in the middle of a log * record do we update last_blk. */ - if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) { + if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) { uint h_size = be32_to_cpu(head->h_size); xhdrs = h_size / XLOG_HEADER_CYCLE_SIZE; @@ -888,7 +888,7 @@ xlog_find_tail( * unmount record if there is one, so we pass the lsn of the * unmount record rather than the block after it. */ - if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) { + if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) { int h_size = be32_to_cpu(rhead->h_size); int h_version = be32_to_cpu(rhead->h_version); @@ -1101,7 +1101,7 @@ xlog_add_record( recp->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM); recp->h_cycle = cpu_to_be32(cycle); recp->h_version = cpu_to_be32( - XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? 2 : 1); + xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1); recp->h_lsn = cpu_to_be64(xlog_assign_lsn(cycle, block)); recp->h_tail_lsn = cpu_to_be64(xlog_assign_lsn(tail_cycle, tail_block)); recp->h_fmt = cpu_to_be32(XLOG_FMT); @@ -3348,7 +3348,7 @@ xlog_pack_data( dp += BBSIZE; } - if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) { + if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) { xhdr = (xlog_in_core_2_t *)&iclog->ic_header; for ( ; i < BTOBB(size); i++) { j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE); @@ -3388,7 +3388,7 @@ xlog_unpack_data_checksum( be32_to_cpu(rhead->h_chksum), chksum); cmn_err(CE_DEBUG, "XFS: Disregard message if filesystem was created with non-DEBUG kernel"); - if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) { + if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) { cmn_err(CE_DEBUG, "XFS: LogR this is a LogV2 filesystem\n"); } @@ -3415,7 +3415,7 @@ xlog_unpack_data( dp += BBSIZE; } - if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) { + if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) { xhdr = (xlog_in_core_2_t *)rhead; for ( ; i < BTOBB(be32_to_cpu(rhead->h_len)); i++) { j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE); @@ -3494,7 +3494,7 @@ xlog_do_recovery_pass( * Read the header of the tail block and get the iclog buffer size from * h_size. Use this to tell how many sectors make up the log header. */ - if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) { + if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) { /* * When using variable length iclogs, read first sector of * iclog header and extract the header size from it. Get a @@ -3838,7 +3838,7 @@ xlog_do_recover( sbp = &log->l_mp->m_sb; xfs_sb_from_disk(sbp, XFS_BUF_TO_SBP(bp)); ASSERT(sbp->sb_magicnum == XFS_SB_MAGIC); - ASSERT(XFS_SB_GOOD_VERSION(sbp)); + ASSERT(xfs_sb_good_version(sbp)); xfs_buf_relse(bp); /* We've re-read the superblock so re-initialize per-cpu counters */ diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 6409b3762995..99bab1e372b1 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -225,7 +225,7 @@ xfs_mount_validate_sb( return XFS_ERROR(EWRONGFS); } - if (!XFS_SB_GOOD_VERSION(sbp)) { + if (!xfs_sb_good_version(sbp)) { xfs_fs_mount_cmn_err(flags, "bad version"); return XFS_ERROR(EWRONGFS); } @@ -300,7 +300,7 @@ xfs_mount_validate_sb( /* * Version 1 directory format has never worked on Linux. */ - if (unlikely(!XFS_SB_VERSION_HASDIRV2(sbp))) { + if (unlikely(!xfs_sb_version_hasdirv2(sbp))) { xfs_fs_mount_cmn_err(flags, "file system using version 1 directory format"); return XFS_ERROR(ENOSYS); @@ -781,7 +781,7 @@ xfs_update_alignment(xfs_mount_t *mp, int mfsi_flags, __uint64_t *update_flags) * Update superblock with new values * and log changes */ - if (XFS_SB_VERSION_HASDALIGN(sbp)) { + if (xfs_sb_version_hasdalign(sbp)) { if (sbp->sb_unit != mp->m_dalign) { sbp->sb_unit = mp->m_dalign; *update_flags |= XFS_SB_UNIT; @@ -792,7 +792,7 @@ xfs_update_alignment(xfs_mount_t *mp, int mfsi_flags, __uint64_t *update_flags) } } } else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN && - XFS_SB_VERSION_HASDALIGN(&mp->m_sb)) { + xfs_sb_version_hasdalign(&mp->m_sb)) { mp->m_dalign = sbp->sb_unit; mp->m_swidth = sbp->sb_width; } @@ -869,7 +869,7 @@ xfs_set_rw_sizes(xfs_mount_t *mp) STATIC void xfs_set_inoalignment(xfs_mount_t *mp) { - if (XFS_SB_VERSION_HASALIGN(&mp->m_sb) && + if (xfs_sb_version_hasalign(&mp->m_sb) && mp->m_sb.sb_inoalignmt >= XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size)) mp->m_inoalign_mask = mp->m_sb.sb_inoalignmt - 1; diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index 94660b1a6ccc..d3a59735009a 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -271,7 +271,6 @@ typedef enum { #define XFS_SB_VERSION_NUM(sbp) ((sbp)->sb_versionnum & XFS_SB_VERSION_NUMBITS) -#define XFS_SB_GOOD_VERSION(sbp) xfs_sb_good_version(sbp) #ifdef __KERNEL__ static inline int xfs_sb_good_version(xfs_sb_t *sbp) { @@ -297,7 +296,6 @@ static inline int xfs_sb_good_version(xfs_sb_t *sbp) } #endif /* __KERNEL__ */ -#define XFS_SB_VERSION_TONEW(v) xfs_sb_version_tonew(v) static inline unsigned xfs_sb_version_tonew(unsigned v) { return ((((v) == XFS_SB_VERSION_1) ? \ @@ -308,7 +306,6 @@ static inline unsigned xfs_sb_version_tonew(unsigned v) XFS_SB_VERSION_4); } -#define XFS_SB_VERSION_TOOLD(v) xfs_sb_version_toold(v) static inline unsigned xfs_sb_version_toold(unsigned v) { return (((v) & (XFS_SB_VERSION_QUOTABIT | XFS_SB_VERSION_ALIGNBIT)) ? \ @@ -320,7 +317,6 @@ static inline unsigned xfs_sb_version_toold(unsigned v) XFS_SB_VERSION_1))); } -#define XFS_SB_VERSION_HASATTR(sbp) xfs_sb_version_hasattr(sbp) static inline int xfs_sb_version_hasattr(xfs_sb_t *sbp) { return ((sbp)->sb_versionnum == XFS_SB_VERSION_2) || \ @@ -329,7 +325,6 @@ static inline int xfs_sb_version_hasattr(xfs_sb_t *sbp) ((sbp)->sb_versionnum & XFS_SB_VERSION_ATTRBIT)); } -#define XFS_SB_VERSION_ADDATTR(sbp) xfs_sb_version_addattr(sbp) static inline void xfs_sb_version_addattr(xfs_sb_t *sbp) { (sbp)->sb_versionnum = (((sbp)->sb_versionnum == XFS_SB_VERSION_1) ? \ @@ -339,7 +334,6 @@ static inline void xfs_sb_version_addattr(xfs_sb_t *sbp) (XFS_SB_VERSION_4 | XFS_SB_VERSION_ATTRBIT))); } -#define XFS_SB_VERSION_HASNLINK(sbp) xfs_sb_version_hasnlink(sbp) static inline int xfs_sb_version_hasnlink(xfs_sb_t *sbp) { return ((sbp)->sb_versionnum == XFS_SB_VERSION_3) || \ @@ -347,7 +341,6 @@ static inline int xfs_sb_version_hasnlink(xfs_sb_t *sbp) ((sbp)->sb_versionnum & XFS_SB_VERSION_NLINKBIT)); } -#define XFS_SB_VERSION_ADDNLINK(sbp) xfs_sb_version_addnlink(sbp) static inline void xfs_sb_version_addnlink(xfs_sb_t *sbp) { (sbp)->sb_versionnum = ((sbp)->sb_versionnum <= XFS_SB_VERSION_2 ? \ @@ -355,115 +348,63 @@ static inline void xfs_sb_version_addnlink(xfs_sb_t *sbp) ((sbp)->sb_versionnum | XFS_SB_VERSION_NLINKBIT)); } -#define XFS_SB_VERSION_HASQUOTA(sbp) xfs_sb_version_hasquota(sbp) static inline int xfs_sb_version_hasquota(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ ((sbp)->sb_versionnum & XFS_SB_VERSION_QUOTABIT); } -#define XFS_SB_VERSION_ADDQUOTA(sbp) xfs_sb_version_addquota(sbp) static inline void xfs_sb_version_addquota(xfs_sb_t *sbp) { (sbp)->sb_versionnum = \ (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4 ? \ ((sbp)->sb_versionnum | XFS_SB_VERSION_QUOTABIT) : \ - (XFS_SB_VERSION_TONEW((sbp)->sb_versionnum) | \ + (xfs_sb_version_tonew((sbp)->sb_versionnum) | \ XFS_SB_VERSION_QUOTABIT)); } -#define XFS_SB_VERSION_HASALIGN(sbp) xfs_sb_version_hasalign(sbp) static inline int xfs_sb_version_hasalign(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ ((sbp)->sb_versionnum & XFS_SB_VERSION_ALIGNBIT); } -#define XFS_SB_VERSION_SUBALIGN(sbp) xfs_sb_version_subalign(sbp) -static inline void xfs_sb_version_subalign(xfs_sb_t *sbp) -{ - (sbp)->sb_versionnum = \ - XFS_SB_VERSION_TOOLD((sbp)->sb_versionnum & ~XFS_SB_VERSION_ALIGNBIT); -} - -#define XFS_SB_VERSION_HASDALIGN(sbp) xfs_sb_version_hasdalign(sbp) static inline int xfs_sb_version_hasdalign(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ ((sbp)->sb_versionnum & XFS_SB_VERSION_DALIGNBIT); } -#define XFS_SB_VERSION_ADDDALIGN(sbp) xfs_sb_version_adddalign(sbp) -static inline int xfs_sb_version_adddalign(xfs_sb_t *sbp) -{ - return (sbp)->sb_versionnum = \ - ((sbp)->sb_versionnum | XFS_SB_VERSION_DALIGNBIT); -} - -#define XFS_SB_VERSION_HASSHARED(sbp) xfs_sb_version_hasshared(sbp) static inline int xfs_sb_version_hasshared(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ ((sbp)->sb_versionnum & XFS_SB_VERSION_SHAREDBIT); } -#define XFS_SB_VERSION_ADDSHARED(sbp) xfs_sb_version_addshared(sbp) -static inline int xfs_sb_version_addshared(xfs_sb_t *sbp) -{ - return (sbp)->sb_versionnum = \ - ((sbp)->sb_versionnum | XFS_SB_VERSION_SHAREDBIT); -} - -#define XFS_SB_VERSION_SUBSHARED(sbp) xfs_sb_version_subshared(sbp) -static inline int xfs_sb_version_subshared(xfs_sb_t *sbp) -{ - return (sbp)->sb_versionnum = \ - ((sbp)->sb_versionnum & ~XFS_SB_VERSION_SHAREDBIT); -} - -#define XFS_SB_VERSION_HASDIRV2(sbp) xfs_sb_version_hasdirv2(sbp) static inline int xfs_sb_version_hasdirv2(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ ((sbp)->sb_versionnum & XFS_SB_VERSION_DIRV2BIT); } -#define XFS_SB_VERSION_HASLOGV2(sbp) xfs_sb_version_haslogv2(sbp) static inline int xfs_sb_version_haslogv2(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ ((sbp)->sb_versionnum & XFS_SB_VERSION_LOGV2BIT); } -#define XFS_SB_VERSION_HASEXTFLGBIT(sbp) xfs_sb_version_hasextflgbit(sbp) static inline int xfs_sb_version_hasextflgbit(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ ((sbp)->sb_versionnum & XFS_SB_VERSION_EXTFLGBIT); } -#define XFS_SB_VERSION_ADDEXTFLGBIT(sbp) xfs_sb_version_addextflgbit(sbp) -static inline int xfs_sb_version_addextflgbit(xfs_sb_t *sbp) -{ - return (sbp)->sb_versionnum = \ - ((sbp)->sb_versionnum | XFS_SB_VERSION_EXTFLGBIT); -} - -#define XFS_SB_VERSION_SUBEXTFLGBIT(sbp) xfs_sb_version_subextflgbit(sbp) -static inline int xfs_sb_version_subextflgbit(xfs_sb_t *sbp) -{ - return (sbp)->sb_versionnum = \ - ((sbp)->sb_versionnum & ~XFS_SB_VERSION_EXTFLGBIT); -} - -#define XFS_SB_VERSION_HASSECTOR(sbp) xfs_sb_version_hassector(sbp) static inline int xfs_sb_version_hassector(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ ((sbp)->sb_versionnum & XFS_SB_VERSION_SECTORBIT); } -#define XFS_SB_VERSION_HASMOREBITS(sbp) xfs_sb_version_hasmorebits(sbp) static inline int xfs_sb_version_hasmorebits(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ @@ -476,24 +417,22 @@ static inline int xfs_sb_version_hasmorebits(xfs_sb_t *sbp) * For example, for a bit defined as XFS_SB_VERSION2_FUNBIT, has a macro: * * SB_VERSION_HASFUNBIT(xfs_sb_t *sbp) - * ((XFS_SB_VERSION_HASMOREBITS(sbp) && + * ((xfs_sb_version_hasmorebits(sbp) && * ((sbp)->sb_features2 & XFS_SB_VERSION2_FUNBIT) */ static inline int xfs_sb_version_haslazysbcount(xfs_sb_t *sbp) { - return (XFS_SB_VERSION_HASMOREBITS(sbp) && \ + return (xfs_sb_version_hasmorebits(sbp) && \ ((sbp)->sb_features2 & XFS_SB_VERSION2_LAZYSBCOUNTBIT)); } -#define XFS_SB_VERSION_HASATTR2(sbp) xfs_sb_version_hasattr2(sbp) static inline int xfs_sb_version_hasattr2(xfs_sb_t *sbp) { - return (XFS_SB_VERSION_HASMOREBITS(sbp)) && \ + return (xfs_sb_version_hasmorebits(sbp)) && \ ((sbp)->sb_features2 & XFS_SB_VERSION2_ATTR2BIT); } -#define XFS_SB_VERSION_ADDATTR2(sbp) xfs_sb_version_addattr2(sbp) static inline void xfs_sb_version_addattr2(xfs_sb_t *sbp) { ((sbp)->sb_versionnum = \ diff --git a/fs/xfs/xfs_utils.c b/fs/xfs/xfs_utils.c index 45d740df53b7..18a85e746680 100644 --- a/fs/xfs/xfs_utils.c +++ b/fs/xfs/xfs_utils.c @@ -339,10 +339,10 @@ xfs_bump_ino_vers2( ip->i_d.di_onlink = 0; memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad)); mp = tp->t_mountp; - if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) { + if (!xfs_sb_version_hasnlink(&mp->m_sb)) { spin_lock(&mp->m_sb_lock); - if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) { - XFS_SB_VERSION_ADDNLINK(&mp->m_sb); + if (!xfs_sb_version_hasnlink(&mp->m_sb)) { + xfs_sb_version_addnlink(&mp->m_sb); spin_unlock(&mp->m_sb_lock); xfs_mod_sb(tp, XFS_SB_VERSIONNUM); } else { diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index 7321304a69cc..7094caff13cf 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -330,7 +330,7 @@ xfs_finish_flags( int ronly = (mp->m_flags & XFS_MOUNT_RDONLY); /* Fail a mount where the logbuf is smaller then the log stripe */ - if (XFS_SB_VERSION_HASLOGV2(&mp->m_sb)) { + if (xfs_sb_version_haslogv2(&mp->m_sb)) { if ((ap->logbufsize <= 0) && (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) { mp->m_logbsize = mp->m_sb.sb_logsunit; @@ -349,9 +349,8 @@ xfs_finish_flags( } } - if (XFS_SB_VERSION_HASATTR2(&mp->m_sb)) { + if (xfs_sb_version_hasattr2(&mp->m_sb)) mp->m_flags |= XFS_MOUNT_ATTR2; - } /* * prohibit r/w mounts of read-only filesystems @@ -366,7 +365,7 @@ xfs_finish_flags( * check for shared mount. */ if (ap->flags & XFSMNT_SHARED) { - if (!XFS_SB_VERSION_HASSHARED(&mp->m_sb)) + if (!xfs_sb_version_hasshared(&mp->m_sb)) return XFS_ERROR(EINVAL); /* @@ -512,7 +511,7 @@ xfs_mount( if (!error && logdev && logdev != ddev) { unsigned int log_sector_size = BBSIZE; - if (XFS_SB_VERSION_HASSECTOR(&mp->m_sb)) + if (xfs_sb_version_hassector(&mp->m_sb)) log_sector_size = mp->m_sb.sb_logsectsize; error = xfs_setsize_buftarg(mp->m_logdev_targp, mp->m_sb.sb_blocksize, diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 51305242ff8c..64c5953feca4 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -4132,7 +4132,7 @@ xfs_free_file_space( * actually need to zero the extent edges. Otherwise xfs_bunmapi * will take care of it for us. */ - if (rt && !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) { + if (rt && !xfs_sb_version_hasextflgbit(&mp->m_sb)) { nimap = 1; error = xfs_bmapi(NULL, ip, startoffset_fsb, 1, 0, NULL, 0, &imap, &nimap, NULL, NULL); From ee1c090825bf2f1cb9712489c234eabf69a9a78f Mon Sep 17 00:00:00 2001 From: David Chinner Date: Thu, 6 Mar 2008 13:45:50 +1100 Subject: [PATCH 089/187] [XFS] Fix superblock features2 field alignment problem Due to the xfs_dsb_t structure not being 64 bit aligned, the last field of the on-disk superblock can vary in location This causes problems when the filesystem gets moved to a different platform, or there is a 32 bit userspace and 64 bit kernel. This patch detects the defect at mount time, logs a warning such as: XFS: correcting sb_features alignment problem in dmesg and corrects the problem so that everything is OK. it also blacklists the bad field in the superblock so it does not get used for something else later on. SGI-PV: 977636 SGI-Modid: xfs-linux-melb:xfs-kern:30539a Signed-off-by: David Chinner Signed-off-by: Christoph Hellwig Signed-off-by: Eric Sandeen Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_mount.c | 34 ++++++++++++++++++++++++++++------ fs/xfs/xfs_sb.h | 37 ++++++++++++++++++++++++++++++++++--- 2 files changed, 62 insertions(+), 9 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 99bab1e372b1..4e93c02faf24 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -44,7 +44,7 @@ #include "xfs_quota.h" #include "xfs_fsops.h" -STATIC void xfs_mount_log_sbunit(xfs_mount_t *, __int64_t); +STATIC void xfs_mount_log_sb(xfs_mount_t *, __int64_t); STATIC int xfs_uuid_mount(xfs_mount_t *); STATIC void xfs_uuid_unmount(xfs_mount_t *mp); STATIC void xfs_unmountfs_wait(xfs_mount_t *); @@ -119,6 +119,7 @@ static const struct { { offsetof(xfs_sb_t, sb_logsectsize),0 }, { offsetof(xfs_sb_t, sb_logsunit), 0 }, { offsetof(xfs_sb_t, sb_features2), 0 }, + { offsetof(xfs_sb_t, sb_bad_features2), 0 }, { sizeof(xfs_sb_t), 0 } }; @@ -449,6 +450,7 @@ xfs_sb_from_disk( to->sb_logsectsize = be16_to_cpu(from->sb_logsectsize); to->sb_logsunit = be32_to_cpu(from->sb_logsunit); to->sb_features2 = be32_to_cpu(from->sb_features2); + to->sb_bad_features2 = be32_to_cpu(from->sb_bad_features2); } /* @@ -969,6 +971,26 @@ xfs_mountfs( } xfs_mount_common(mp, sbp); + /* + * Check for a bad features2 field alignment. This happened on + * some platforms due to xfs_sb_t not being 64bit size aligned + * when sb_features was added and hence the compiler put it in + * the wrong place. + * + * If we detect a bad field, we or the set bits into the existing + * features2 field in case it has already been modified and we + * don't want to lose any features. Zero the bad one and mark + * the two fields as needing updates once the transaction subsystem + * is online. + */ + if (xfs_sb_has_bad_features2(sbp)) { + cmn_err(CE_WARN, + "XFS: correcting sb_features alignment problem"); + sbp->sb_features2 |= sbp->sb_bad_features2; + sbp->sb_bad_features2 = 0; + update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; + } + /* * Check if sb_agblocks is aligned at stripe boundary * If sb_agblocks is NOT aligned turn off m_dalign since @@ -1159,11 +1181,10 @@ xfs_mountfs( } /* - * If fs is not mounted readonly, then update the superblock - * unit and width changes. + * If fs is not mounted readonly, then update the superblock changes. */ if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) - xfs_mount_log_sbunit(mp, update_flags); + xfs_mount_log_sb(mp, update_flags); /* * Initialise the XFS quota management subsystem for this mount @@ -1878,13 +1899,14 @@ xfs_uuid_unmount( * be altered by the mount options. Only the first superblock is updated. */ STATIC void -xfs_mount_log_sbunit( +xfs_mount_log_sb( xfs_mount_t *mp, __int64_t fields) { xfs_trans_t *tp; - ASSERT(fields & (XFS_SB_UNIT|XFS_SB_WIDTH|XFS_SB_UUID)); + ASSERT(fields & (XFS_SB_UNIT | XFS_SB_WIDTH | XFS_SB_UUID | + XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2)); tp = xfs_trans_alloc(mp, XFS_TRANS_SB_UNIT); if (xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0, diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index d3a59735009a..b1a83f8ec044 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -89,6 +89,7 @@ struct xfs_mount; /* * Superblock - in core version. Must match the ondisk version below. + * Must be padded to 64 bit alignment. */ typedef struct xfs_sb { __uint32_t sb_magicnum; /* magic number == XFS_SB_MAGIC */ @@ -145,10 +146,21 @@ typedef struct xfs_sb { __uint16_t sb_logsectsize; /* sector size for the log, bytes */ __uint32_t sb_logsunit; /* stripe unit size for the log */ __uint32_t sb_features2; /* additional feature bits */ + + /* + * bad features2 field as a result of failing to pad the sb + * structure to 64 bits. Some machines will be using this field + * for features2 bits. Easiest just to mark it bad and not use + * it for anything else. + */ + __uint32_t sb_bad_features2; + + /* must be padded to 64 bit alignment */ } xfs_sb_t; /* - * Superblock - on disk version. Must match the in core version below. + * Superblock - on disk version. Must match the in core version above. + * Must be padded to 64 bit alignment. */ typedef struct xfs_dsb { __be32 sb_magicnum; /* magic number == XFS_SB_MAGIC */ @@ -205,6 +217,15 @@ typedef struct xfs_dsb { __be16 sb_logsectsize; /* sector size for the log, bytes */ __be32 sb_logsunit; /* stripe unit size for the log */ __be32 sb_features2; /* additional feature bits */ + /* + * bad features2 field as a result of failing to pad the sb + * structure to 64 bits. Some machines will be using this field + * for features2 bits. Easiest just to mark it bad and not use + * it for anything else. + */ + __be32 sb_bad_features2; + + /* must be padded to 64 bit alignment */ } xfs_dsb_t; /* @@ -223,7 +244,7 @@ typedef enum { XFS_SBS_GQUOTINO, XFS_SBS_QFLAGS, XFS_SBS_FLAGS, XFS_SBS_SHARED_VN, XFS_SBS_INOALIGNMT, XFS_SBS_UNIT, XFS_SBS_WIDTH, XFS_SBS_DIRBLKLOG, XFS_SBS_LOGSECTLOG, XFS_SBS_LOGSECTSIZE, XFS_SBS_LOGSUNIT, - XFS_SBS_FEATURES2, + XFS_SBS_FEATURES2, XFS_SBS_BAD_FEATURES2, XFS_SBS_FIELDCOUNT } xfs_sb_field_t; @@ -248,13 +269,15 @@ typedef enum { #define XFS_SB_IFREE XFS_SB_MVAL(IFREE) #define XFS_SB_FDBLOCKS XFS_SB_MVAL(FDBLOCKS) #define XFS_SB_FEATURES2 XFS_SB_MVAL(FEATURES2) +#define XFS_SB_BAD_FEATURES2 XFS_SB_MVAL(BAD_FEATURES2) #define XFS_SB_NUM_BITS ((int)XFS_SBS_FIELDCOUNT) #define XFS_SB_ALL_BITS ((1LL << XFS_SB_NUM_BITS) - 1) #define XFS_SB_MOD_BITS \ (XFS_SB_UUID | XFS_SB_ROOTINO | XFS_SB_RBMINO | XFS_SB_RSUMINO | \ XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO | XFS_SB_GQUOTINO | \ XFS_SB_QFLAGS | XFS_SB_SHARED_VN | XFS_SB_UNIT | XFS_SB_WIDTH | \ - XFS_SB_ICOUNT | XFS_SB_IFREE | XFS_SB_FDBLOCKS | XFS_SB_FEATURES2) + XFS_SB_ICOUNT | XFS_SB_IFREE | XFS_SB_FDBLOCKS | XFS_SB_FEATURES2 | \ + XFS_SB_BAD_FEATURES2) /* @@ -296,6 +319,14 @@ static inline int xfs_sb_good_version(xfs_sb_t *sbp) } #endif /* __KERNEL__ */ +/* + * Detect a bad features2 field + */ +static inline int xfs_sb_has_bad_features2(xfs_sb_t *sbp) +{ + return (sbp->sb_bad_features2 != 0); +} + static inline unsigned xfs_sb_version_tonew(unsigned v) { return ((((v) == XFS_SB_VERSION_1) ? \ From e6957ea48429aeda4f5d51af4238231d44b0dc4a Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Thu, 10 Apr 2008 12:19:34 +1000 Subject: [PATCH 090/187] [XFS] Ensure "both" features2 slots are consistent Since older kernels may look in the sb_bad_features2 slot for flags, rather than zeroing it out on fixup, we should make it equal to the sb_features2 value. Also, if the ATTR2 flag was not found prior to features2 fixup, it was not set in the mount flags, so re-check after the fixup so that the current session will use the feature. Also fix up the comments to reflect these changes. SGI-PV: 980085 SGI-Modid: xfs-linux-melb:xfs-kern:30778a Signed-off-by: Eric Sandeen Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_mount.c | 37 +++++++++++++++++++++++++------------ fs/xfs/xfs_sb.h | 7 ++++--- 2 files changed, 29 insertions(+), 15 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 4e93c02faf24..8ed164eb9544 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -972,23 +972,35 @@ xfs_mountfs( xfs_mount_common(mp, sbp); /* - * Check for a bad features2 field alignment. This happened on - * some platforms due to xfs_sb_t not being 64bit size aligned - * when sb_features was added and hence the compiler put it in - * the wrong place. + * Check for a mismatched features2 values. Older kernels + * read & wrote into the wrong sb offset for sb_features2 + * on some platforms due to xfs_sb_t not being 64bit size aligned + * when sb_features2 was added, which made older superblock + * reading/writing routines swap it as a 64-bit value. * - * If we detect a bad field, we or the set bits into the existing - * features2 field in case it has already been modified and we - * don't want to lose any features. Zero the bad one and mark - * the two fields as needing updates once the transaction subsystem - * is online. + * For backwards compatibility, we make both slots equal. + * + * If we detect a mismatched field, we OR the set bits into the + * existing features2 field in case it has already been modified; we + * don't want to lose any features. We then update the bad location + * with the ORed value so that older kernels will see any features2 + * flags, and mark the two fields as needing updates once the + * transaction subsystem is online. */ - if (xfs_sb_has_bad_features2(sbp)) { + if (xfs_sb_has_mismatched_features2(sbp)) { cmn_err(CE_WARN, "XFS: correcting sb_features alignment problem"); sbp->sb_features2 |= sbp->sb_bad_features2; - sbp->sb_bad_features2 = 0; + sbp->sb_bad_features2 = sbp->sb_features2; update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; + + /* + * Re-check for ATTR2 in case it was found in bad_features2 + * slot. + */ + if (xfs_sb_version_hasattr2(&mp->m_sb)) + mp->m_flags |= XFS_MOUNT_ATTR2; + } /* @@ -1896,7 +1908,8 @@ xfs_uuid_unmount( /* * Used to log changes to the superblock unit and width fields which could - * be altered by the mount options. Only the first superblock is updated. + * be altered by the mount options, as well as any potential sb_features2 + * fixup. Only the first superblock is updated. */ STATIC void xfs_mount_log_sb( diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index b1a83f8ec044..d904efe7f871 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -320,11 +320,12 @@ static inline int xfs_sb_good_version(xfs_sb_t *sbp) #endif /* __KERNEL__ */ /* - * Detect a bad features2 field + * Detect a mismatched features2 field. Older kernels read/wrote + * this into the wrong slot, so to be safe we keep them in sync. */ -static inline int xfs_sb_has_bad_features2(xfs_sb_t *sbp) +static inline int xfs_sb_has_mismatched_features2(xfs_sb_t *sbp) { - return (sbp->sb_bad_features2 != 0); + return (sbp->sb_bad_features2 != sbp->sb_features2); } static inline unsigned xfs_sb_version_tonew(unsigned v) From 4faa3c8150c1d4f7b38d962eda7851083e218e3f Mon Sep 17 00:00:00 2001 From: Fabio Checconi Date: Thu, 10 Apr 2008 08:28:01 +0200 Subject: [PATCH 091/187] cfq-iosched: do not leak ioc_data across iosched switches When switching scheduler from cfq, cfq_exit_queue() does not clear ioc->ioc_data, leaving a dangling pointer that can deceive the following lookups when the iosched is switched back to cfq. The pattern that can trigger that is the following: - elevator switch from cfq to something else; - module unloading, with elv_unregister() that calls cfq_free_io_context() on ioc freeing the cic (via the .trim op); - module gets reloaded and the elevator switches back to cfq; - reallocation of a cic at the same address as before (with a valid key). To fix it just assign NULL to ioc_data in __cfq_exit_single_io_context(), that is called from the regular exit path and from the elevator switching code. The only path that frees a cic and is not covered is the error handling one, but cic's freed in this way are never cached in ioc_data. Signed-off-by: Fabio Checconi Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index f26da2bfcc15..f4e1006c253d 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1214,6 +1214,8 @@ static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq) static void __cfq_exit_single_io_context(struct cfq_data *cfqd, struct cfq_io_context *cic) { + struct io_context *ioc = cic->ioc; + list_del_init(&cic->queue_list); /* @@ -1223,6 +1225,9 @@ static void __cfq_exit_single_io_context(struct cfq_data *cfqd, cic->dead_key = (unsigned long) cic->key; cic->key = NULL; + if (ioc->ioc_data == cic) + rcu_assign_pointer(ioc->ioc_data, NULL); + if (cic->cfqq[ASYNC]) { cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]); cic->cfqq[ASYNC] = NULL; @@ -1255,7 +1260,6 @@ static void cfq_exit_single_io_context(struct io_context *ioc, */ static void cfq_exit_io_context(struct io_context *ioc) { - rcu_assign_pointer(ioc->ioc_data, NULL); call_for_each_cic(ioc, cfq_exit_single_io_context); } @@ -1478,8 +1482,7 @@ cfq_drop_dead_cic(struct cfq_data *cfqd, struct io_context *ioc, spin_lock_irqsave(&ioc->lock, flags); - if (ioc->ioc_data == cic) - rcu_assign_pointer(ioc->ioc_data, NULL); + BUG_ON(ioc->ioc_data == cic); radix_tree_delete(&ioc->radix_root, (unsigned long) cfqd); hlist_del_rcu(&cic->cic_list); From 76b0c26af2736b7e5b87e6ed7ab63901483d5736 Mon Sep 17 00:00:00 2001 From: Roman Zippel Date: Wed, 9 Apr 2008 17:44:07 +0200 Subject: [PATCH 092/187] HFS+: fix unlink of links Some time ago while attempting to handle invalid link counts, I botched the unlink of links itself, so this patch fixes this now correctly, so that only the link count of nodes that don't point to links is ignored. Thanks to Vlado Plaga to notify me of this problem. Signed-off-by: Roman Zippel Signed-off-by: Linus Torvalds --- fs/hfsplus/dir.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/fs/hfsplus/dir.c b/fs/hfsplus/dir.c index 29683645fa0a..5f4023678251 100644 --- a/fs/hfsplus/dir.c +++ b/fs/hfsplus/dir.c @@ -340,16 +340,23 @@ static int hfsplus_unlink(struct inode *dir, struct dentry *dentry) if (inode->i_nlink > 0) drop_nlink(inode); - hfsplus_delete_inode(inode); - if (inode->i_ino != cnid && !inode->i_nlink) { - if (!atomic_read(&HFSPLUS_I(inode).opencnt)) { - res = hfsplus_delete_cat(inode->i_ino, HFSPLUS_SB(sb).hidden_dir, NULL); - if (!res) - hfsplus_delete_inode(inode); - } else - inode->i_flags |= S_DEAD; - } else + if (inode->i_ino == cnid) clear_nlink(inode); + if (!inode->i_nlink) { + if (inode->i_ino != cnid) { + HFSPLUS_SB(sb).file_count--; + if (!atomic_read(&HFSPLUS_I(inode).opencnt)) { + res = hfsplus_delete_cat(inode->i_ino, + HFSPLUS_SB(sb).hidden_dir, + NULL); + if (!res) + hfsplus_delete_inode(inode); + } else + inode->i_flags |= S_DEAD; + } else + hfsplus_delete_inode(inode); + } else + HFSPLUS_SB(sb).file_count--; inode->i_ctime = CURRENT_TIME_SEC; mark_inode_dirty(inode); From a31b9dd8edc6e4e75b5299fee6093b3c54548446 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 10 Apr 2008 16:10:45 +0100 Subject: [PATCH 093/187] FRV: Handle update_mmu_cache() being called when current->mm is NULL [try #2] Handle update_mmu_cache() being called when current->mm is NULL. We cache static TLB mappings for the current page table in DAMPR4 and DAMPR5 on the theory that the next data lookup is likely to be in the same general region, and thus is likely to be mapped by the same page table. However, we can't get this information if we can't access the appropriate mm_struct. If current->mm is NULL, we just clear the cache in the knowledge that the TLB miss handlers will load it. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/asm-frv/pgtable.h | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h index 6c0682ed5fc9..4e219046fe42 100644 --- a/include/asm-frv/pgtable.h +++ b/include/asm-frv/pgtable.h @@ -507,13 +507,22 @@ static inline int pte_file(pte_t pte) */ static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte) { + struct mm_struct *mm; unsigned long ampr; - pgd_t *pge = pgd_offset(current->mm, address); - pud_t *pue = pud_offset(pge, address); - pmd_t *pme = pmd_offset(pue, address); - ampr = pme->ste[0] & 0xffffff00; - ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | xAMPRx_V; + mm = current->mm; + if (mm) { + pgd_t *pge = pgd_offset(mm, address); + pud_t *pue = pud_offset(pge, address); + pmd_t *pme = pmd_offset(pue, address); + + ampr = pme->ste[0] & 0xffffff00; + ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | + xAMPRx_V; + } else { + address = ULONG_MAX; + ampr = 0; + } asm volatile("movgs %0,scr0\n" "movgs %0,scr1\n" From 0c93d8e4d342b1b5cda1037f2527fcf443c80fbc Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 10 Apr 2008 16:10:50 +0100 Subject: [PATCH 094/187] FRV: Move STACK_TOP_MAX up [try #2] Move STACK_TOP_MAX up so that we don't try moving the stack above it as that causes setup_arg_pages() to malfunction. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/asm-frv/mem-layout.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h index 83532252b8be..734a1d0583b6 100644 --- a/include/asm-frv/mem-layout.h +++ b/include/asm-frv/mem-layout.h @@ -60,7 +60,7 @@ */ #define BRK_BASE __UL(2 * 1024 * 1024 + PAGE_SIZE) #define STACK_TOP __UL(2 * 1024 * 1024) -#define STACK_TOP_MAX STACK_TOP +#define STACK_TOP_MAX __UL(0xc0000000) /* userspace process size */ #ifdef CONFIG_MMU From e31c243f984628d02f045dc4b622f1e2827860dc Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 10 Apr 2008 16:10:55 +0100 Subject: [PATCH 095/187] FRV: Add support for emulation of userspace atomic ops [try #2] Use traps 120-126 to emulate atomic cmpxchg32, xchg32, and XOR-, OR-, AND-, SUB- and ADD-to-memory operations for userspace. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/frv/kernel/entry-table.S | 8 +- arch/frv/kernel/entry.S | 20 +++ arch/frv/kernel/traps.c | 227 ++++++++++++++++++++++++++++++++++ include/asm-frv/spr-regs.h | 14 +++ 4 files changed, 268 insertions(+), 1 deletion(-) diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S index d3b9253d862a..bf35f33e48c9 100644 --- a/arch/frv/kernel/entry-table.S +++ b/arch/frv/kernel/entry-table.S @@ -316,8 +316,14 @@ __trap_fixup_kernel_data_tlb_miss: .section .trap.vector .org TBR_TT_TRAP0 >> 2 .long system_call - .rept 126 + .rept 119 .long __entry_unsupported_trap .endr + + # userspace atomic op emulation, traps 120-126 + .rept 7 + .long __entry_atomic_op + .endr + .org TBR_TT_BREAK >> 2 .long __entry_debug_exception diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index f36d7f4a7c25..b8a4b94779b1 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -654,6 +654,26 @@ __entry_debug_exception: movgs gr4,psr jmpl @(gr5,gr0) ; call ill_insn(esfr1,epcr0,esr0) +############################################################################### +# +# handle atomic operation emulation for userspace +# +############################################################################### + .globl __entry_atomic_op +__entry_atomic_op: + LEDS 0x6012 + sethi.p %hi(atomic_operation),gr5 + setlo %lo(atomic_operation),gr5 + movsg esfr1,gr8 + movsg epcr0,gr9 + movsg esr0,gr10 + + # now that we've accessed the exception regs, we can enable exceptions + movsg psr,gr4 + ori gr4,#PSR_ET,gr4 + movgs gr4,psr + jmpl @(gr5,gr0) ; call atomic_operation(esfr1,epcr0,esr0) + ############################################################################### # # handle media exception diff --git a/arch/frv/kernel/traps.c b/arch/frv/kernel/traps.c index 2e6098c85578..2f7e66877f3b 100644 --- a/arch/frv/kernel/traps.c +++ b/arch/frv/kernel/traps.c @@ -100,6 +100,233 @@ asmlinkage void illegal_instruction(unsigned long esfr1, unsigned long epcr0, un force_sig_info(info.si_signo, &info, current); } /* end illegal_instruction() */ +/*****************************************************************************/ +/* + * handle atomic operations with errors + * - arguments in gr8, gr9, gr10 + * - original memory value placed in gr5 + * - replacement memory value placed in gr9 + */ +asmlinkage void atomic_operation(unsigned long esfr1, unsigned long epcr0, + unsigned long esr0) +{ + static DEFINE_SPINLOCK(atomic_op_lock); + unsigned long x, y, z, *p; + mm_segment_t oldfs; + siginfo_t info; + int ret; + + y = 0; + z = 0; + + oldfs = get_fs(); + if (!user_mode(__frame)) + set_fs(KERNEL_DS); + + switch (__frame->tbr & TBR_TT) { + /* TIRA gr0,#120 + * u32 __atomic_user_cmpxchg32(u32 *ptr, u32 test, u32 new) + */ + case TBR_TT_ATOMIC_CMPXCHG32: + p = (unsigned long *) __frame->gr8; + x = __frame->gr9; + y = __frame->gr10; + + for (;;) { + ret = get_user(z, p); + if (ret < 0) + goto error; + + if (z != x) + goto done; + + spin_lock_irq(&atomic_op_lock); + + if (__get_user(z, p) == 0) { + if (z != x) + goto done2; + + if (__put_user(y, p) == 0) + goto done2; + goto error2; + } + + spin_unlock_irq(&atomic_op_lock); + } + + /* TIRA gr0,#121 + * u32 __atomic_kernel_xchg32(void *v, u32 new) + */ + case TBR_TT_ATOMIC_XCHG32: + p = (unsigned long *) __frame->gr8; + y = __frame->gr9; + + for (;;) { + ret = get_user(z, p); + if (ret < 0) + goto error; + + spin_lock_irq(&atomic_op_lock); + + if (__get_user(z, p) == 0) { + if (__put_user(y, p) == 0) + goto done2; + goto error2; + } + + spin_unlock_irq(&atomic_op_lock); + } + + /* TIRA gr0,#122 + * ulong __atomic_kernel_XOR_return(ulong i, ulong *v) + */ + case TBR_TT_ATOMIC_XOR: + p = (unsigned long *) __frame->gr8; + x = __frame->gr9; + + for (;;) { + ret = get_user(z, p); + if (ret < 0) + goto error; + + spin_lock_irq(&atomic_op_lock); + + if (__get_user(z, p) == 0) { + y = x ^ z; + if (__put_user(y, p) == 0) + goto done2; + goto error2; + } + + spin_unlock_irq(&atomic_op_lock); + } + + /* TIRA gr0,#123 + * ulong __atomic_kernel_OR_return(ulong i, ulong *v) + */ + case TBR_TT_ATOMIC_OR: + p = (unsigned long *) __frame->gr8; + x = __frame->gr9; + + for (;;) { + ret = get_user(z, p); + if (ret < 0) + goto error; + + spin_lock_irq(&atomic_op_lock); + + if (__get_user(z, p) == 0) { + y = x ^ z; + if (__put_user(y, p) == 0) + goto done2; + goto error2; + } + + spin_unlock_irq(&atomic_op_lock); + } + + /* TIRA gr0,#124 + * ulong __atomic_kernel_AND_return(ulong i, ulong *v) + */ + case TBR_TT_ATOMIC_AND: + p = (unsigned long *) __frame->gr8; + x = __frame->gr9; + + for (;;) { + ret = get_user(z, p); + if (ret < 0) + goto error; + + spin_lock_irq(&atomic_op_lock); + + if (__get_user(z, p) == 0) { + y = x & z; + if (__put_user(y, p) == 0) + goto done2; + goto error2; + } + + spin_unlock_irq(&atomic_op_lock); + } + + /* TIRA gr0,#125 + * int __atomic_user_sub_return(atomic_t *v, int i) + */ + case TBR_TT_ATOMIC_SUB: + p = (unsigned long *) __frame->gr8; + x = __frame->gr9; + + for (;;) { + ret = get_user(z, p); + if (ret < 0) + goto error; + + spin_lock_irq(&atomic_op_lock); + + if (__get_user(z, p) == 0) { + y = z - x; + if (__put_user(y, p) == 0) + goto done2; + goto error2; + } + + spin_unlock_irq(&atomic_op_lock); + } + + /* TIRA gr0,#126 + * int __atomic_user_add_return(atomic_t *v, int i) + */ + case TBR_TT_ATOMIC_ADD: + p = (unsigned long *) __frame->gr8; + x = __frame->gr9; + + for (;;) { + ret = get_user(z, p); + if (ret < 0) + goto error; + + spin_lock_irq(&atomic_op_lock); + + if (__get_user(z, p) == 0) { + y = z + x; + if (__put_user(y, p) == 0) + goto done2; + goto error2; + } + + spin_unlock_irq(&atomic_op_lock); + } + + default: + BUG(); + } + +done2: + spin_unlock_irq(&atomic_op_lock); +done: + if (!user_mode(__frame)) + set_fs(oldfs); + __frame->gr5 = z; + __frame->gr9 = y; + return; + +error2: + spin_unlock_irq(&atomic_op_lock); +error: + if (!user_mode(__frame)) + set_fs(oldfs); + __frame->pc -= 4; + + die_if_kernel("-- Atomic Op Error --\n"); + + info.si_signo = SIGSEGV; + info.si_code = SEGV_ACCERR; + info.si_errno = 0; + info.si_addr = (void *) __frame->pc; + + force_sig_info(info.si_signo, &info, current); +} + /*****************************************************************************/ /* * diff --git a/include/asm-frv/spr-regs.h b/include/asm-frv/spr-regs.h index c2a541ef828d..01e6af5e99b8 100644 --- a/include/asm-frv/spr-regs.h +++ b/include/asm-frv/spr-regs.h @@ -99,9 +99,23 @@ #define TBR_TT_TRAP1 (0x81 << 4) #define TBR_TT_TRAP2 (0x82 << 4) #define TBR_TT_TRAP3 (0x83 << 4) +#define TBR_TT_TRAP120 (0xf8 << 4) +#define TBR_TT_TRAP121 (0xf9 << 4) +#define TBR_TT_TRAP122 (0xfa << 4) +#define TBR_TT_TRAP123 (0xfb << 4) +#define TBR_TT_TRAP124 (0xfc << 4) +#define TBR_TT_TRAP125 (0xfd << 4) #define TBR_TT_TRAP126 (0xfe << 4) #define TBR_TT_BREAK (0xff << 4) +#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120 +#define TBR_TT_ATOMIC_XCHG32 TBR_TT_TRAP121 +#define TBR_TT_ATOMIC_XOR TBR_TT_TRAP122 +#define TBR_TT_ATOMIC_OR TBR_TT_TRAP123 +#define TBR_TT_ATOMIC_AND TBR_TT_TRAP124 +#define TBR_TT_ATOMIC_SUB TBR_TT_TRAP125 +#define TBR_TT_ATOMIC_ADD TBR_TT_TRAP126 + #define __get_TBR() ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; }) /* From ed9b949f55bc8a6bb6083ce0eddb53d06aee302a Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 10 Apr 2008 16:11:00 +0100 Subject: [PATCH 096/187] FRV: Make NOMMU-mode work with base addresses other than 0xC0000000 [try #2] Make NOMMU-mode work with base addresses other than 0xC0000000 by: (1) Giving the code that sets up the protection registers the right address in __sdram_base. Rather than being hard coded to 0xC0000000, the value of __page_offset is obtained from the linker script. (2) Eliminate the check in __switch_to() that verifies the current thread info is in the 0xCxxxxxxx region. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/frv/kernel/head.inc | 2 +- arch/frv/kernel/switch_to.S | 7 ------- 2 files changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/frv/kernel/head.inc b/arch/frv/kernel/head.inc index d424cd2eb213..bff66628b99a 100644 --- a/arch/frv/kernel/head.inc +++ b/arch/frv/kernel/head.inc @@ -46,5 +46,5 @@ #ifdef CONFIG_MMU __sdram_base = 0x00000000 /* base address to which SDRAM relocated */ #else -__sdram_base = 0xc0000000 /* base address to which SDRAM relocated */ +__sdram_base = __page_offset /* base address to which SDRAM relocated */ #endif diff --git a/arch/frv/kernel/switch_to.S b/arch/frv/kernel/switch_to.S index b5275fa9cd0d..b06668670fcc 100644 --- a/arch/frv/kernel/switch_to.S +++ b/arch/frv/kernel/switch_to.S @@ -102,13 +102,6 @@ __switch_to: movgs gr14,lr bar - srli gr15,#28,gr5 - subicc gr5,#0xc,gr0,icc0 - beq icc0,#0,111f - break - nop -111: - # jump to __switch_back or ret_from_fork as appropriate # - move prev to GR8 movgs gr4,psr From f17520e1f19172057328e50ffed01a42534921e9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 10 Apr 2008 16:11:05 +0100 Subject: [PATCH 097/187] FRV: Don't make smp_{r, w, }mb() interpolate MEMBAR when CONFIG_SMP=n [try #2] Don't make smp_{r,w,}mb() interpolate a MEMBAR instruction when CONFIG_SMP=n as SMP memory barries on UP systems should interpolate a compiler barrier only. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/asm-frv/system.h | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h index 2c57f4734746..30a67a9da11a 100644 --- a/include/asm-frv/system.h +++ b/include/asm-frv/system.h @@ -179,14 +179,23 @@ do { \ #define mb() asm volatile ("membar" : : :"memory") #define rmb() asm volatile ("membar" : : :"memory") #define wmb() asm volatile ("membar" : : :"memory") -#define set_mb(var, value) do { var = value; mb(); } while (0) +#define read_barrier_depends() barrier() -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() - -#define read_barrier_depends() do {} while(0) +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() #define smp_read_barrier_depends() read_barrier_depends() +#define set_mb(var, value) \ + do { xchg(&var, (value)); } while (0) +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do {} while(0) +#define set_mb(var, value) \ + do { var = (value); barrier(); } while (0) +#endif #define HARD_RESET_NOW() \ do { \ From a1e58bbdc969c3fe60addca7f2729779d22a83c1 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 10 Apr 2008 13:38:23 -0700 Subject: [PATCH 098/187] lzo: fix typo in decompressor Shift of a LE value seems strange, probably meant to shift the cpu-order variable as in the prvious section of the switch statement. Signed-off-by: Harvey Harrison Acked-by: Richard Purdie Signed-off-by: Linus Torvalds --- lib/lzo/lzo1x_decompress.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c index 9dc7056e5520..77f0f9b775a9 100644 --- a/lib/lzo/lzo1x_decompress.c +++ b/lib/lzo/lzo1x_decompress.c @@ -158,7 +158,7 @@ match: t += 7 + *ip++; } m_pos -= le16_to_cpu(get_unaligned( - (const unsigned short *)ip) >> 2); + (const unsigned short *)ip)) >> 2; ip += 2; if (m_pos == op) goto eof_found; From 783e391b7b5b273cd20856d8f6f4878da8ec31b3 Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Thu, 10 Apr 2008 09:49:58 -0700 Subject: [PATCH 099/187] x86: Simplify cpu_idle_wait This patch also resolves hangs on boot: http://lkml.org/lkml/2008/2/23/263 http://bugzilla.kernel.org/show_bug.cgi?id=10093 The bug was causing once-in-few-reboots 10-15 sec wait during boot on certain laptops. Earlier commit 40d6a146629b98d8e322b6f9332b182c7cbff3df added smp_call_function in cpu_idle_wait() to kick cpus that are in tickless idle. Looking at cpu_idle_wait code at that time, code seemed to be over-engineered for a case which is rarely used (while changing idle handler). Below is a simplified version of cpu_idle_wait, which just makes a dummy smp_call_function to all cpus, to make them come out of old idle handler and start using the new idle handler. It eliminates code in the idle loop to handle cpu_idle_wait. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Linus Torvalds --- arch/x86/kernel/process_32.c | 47 +++++++++--------------------------- arch/x86/kernel/process_64.c | 47 +++++++++--------------------------- 2 files changed, 22 insertions(+), 72 deletions(-) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index be3c7a299f02..43930e73f657 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -82,7 +82,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk) */ void (*pm_idle)(void); EXPORT_SYMBOL(pm_idle); -static DEFINE_PER_CPU(unsigned int, cpu_idle_state); void disable_hlt(void) { @@ -190,9 +189,6 @@ void cpu_idle(void) while (!need_resched()) { void (*idle)(void); - if (__get_cpu_var(cpu_idle_state)) - __get_cpu_var(cpu_idle_state) = 0; - check_pgt_cache(); rmb(); idle = pm_idle; @@ -220,40 +216,19 @@ static void do_nothing(void *unused) { } +/* + * cpu_idle_wait - Used to ensure that all the CPUs discard old value of + * pm_idle and update to new pm_idle value. Required while changing pm_idle + * handler on SMP systems. + * + * Caller must have changed pm_idle to the new value before the call. Old + * pm_idle value will not be used by any CPU after the return of this function. + */ void cpu_idle_wait(void) { - unsigned int cpu, this_cpu = get_cpu(); - cpumask_t map, tmp = current->cpus_allowed; - - set_cpus_allowed(current, cpumask_of_cpu(this_cpu)); - put_cpu(); - - cpus_clear(map); - for_each_online_cpu(cpu) { - per_cpu(cpu_idle_state, cpu) = 1; - cpu_set(cpu, map); - } - - __get_cpu_var(cpu_idle_state) = 0; - - wmb(); - do { - ssleep(1); - for_each_online_cpu(cpu) { - if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu)) - cpu_clear(cpu, map); - } - cpus_and(map, map, cpu_online_map); - /* - * We waited 1 sec, if a CPU still did not call idle - * it may be because it is in idle and not waking up - * because it has nothing to do. - * Give all the remaining CPUS a kick. - */ - smp_call_function_mask(map, do_nothing, NULL, 0); - } while (!cpus_empty(map)); - - set_cpus_allowed(current, tmp); + smp_mb(); + /* kick all the CPUs so that they exit out of pm_idle */ + smp_call_function(do_nothing, NULL, 0, 1); } EXPORT_SYMBOL_GPL(cpu_idle_wait); diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 3baf9b9f4c87..46c4c546b499 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -63,7 +63,6 @@ EXPORT_SYMBOL(boot_option_idle_override); */ void (*pm_idle)(void); EXPORT_SYMBOL(pm_idle); -static DEFINE_PER_CPU(unsigned int, cpu_idle_state); static ATOMIC_NOTIFIER_HEAD(idle_notifier); @@ -173,9 +172,6 @@ void cpu_idle(void) while (!need_resched()) { void (*idle)(void); - if (__get_cpu_var(cpu_idle_state)) - __get_cpu_var(cpu_idle_state) = 0; - rmb(); idle = pm_idle; if (!idle) @@ -207,40 +203,19 @@ static void do_nothing(void *unused) { } +/* + * cpu_idle_wait - Used to ensure that all the CPUs discard old value of + * pm_idle and update to new pm_idle value. Required while changing pm_idle + * handler on SMP systems. + * + * Caller must have changed pm_idle to the new value before the call. Old + * pm_idle value will not be used by any CPU after the return of this function. + */ void cpu_idle_wait(void) { - unsigned int cpu, this_cpu = get_cpu(); - cpumask_t map, tmp = current->cpus_allowed; - - set_cpus_allowed(current, cpumask_of_cpu(this_cpu)); - put_cpu(); - - cpus_clear(map); - for_each_online_cpu(cpu) { - per_cpu(cpu_idle_state, cpu) = 1; - cpu_set(cpu, map); - } - - __get_cpu_var(cpu_idle_state) = 0; - - wmb(); - do { - ssleep(1); - for_each_online_cpu(cpu) { - if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu)) - cpu_clear(cpu, map); - } - cpus_and(map, map, cpu_online_map); - /* - * We waited 1 sec, if a CPU still did not call idle - * it may be because it is in idle and not waking up - * because it has nothing to do. - * Give all the remaining CPUS a kick. - */ - smp_call_function_mask(map, do_nothing, 0, 0); - } while (!cpus_empty(map)); - - set_cpus_allowed(current, tmp); + smp_mb(); + /* kick all the CPUs so that they exit out of pm_idle */ + smp_call_function(do_nothing, NULL, 0, 1); } EXPORT_SYMBOL_GPL(cpu_idle_wait); From 54a015104136974262afa4b8ddd943ea70dec8a2 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 10 Apr 2008 15:37:38 -0700 Subject: [PATCH 100/187] asmlinkage_protect replaces prevent_tail_call The prevent_tail_call() macro works around the problem of the compiler clobbering argument words on the stack, which for asmlinkage functions is the caller's (user's) struct pt_regs. The tail/sibling-call optimization is not the only way that the compiler can decide to use stack argument words as scratch space, which we have to prevent. Other optimizations can do it too. Until we have new compiler support to make "asmlinkage" binding on the compiler's own use of the stack argument frame, we have work around all the manifestations of this issue that crop up. More cases seem to be prevented by also keeping the incoming argument variables live at the end of the function. This makes their original stack slots attractive places to leave those variables, so the compiler tends not clobber them for something else. It's still no guarantee, but it handles some observed cases that prevent_tail_call() did not. Signed-off-by: Roland McGrath Signed-off-by: Linus Torvalds --- arch/x86/kernel/tls.c | 4 ++-- fs/open.c | 8 ++++---- include/asm-x86/linkage.h | 24 +++++++++++++++++++++++- include/linux/linkage.h | 4 ++-- kernel/exit.c | 4 ++-- kernel/uid16.c | 22 +++++++++++----------- 6 files changed, 44 insertions(+), 22 deletions(-) diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c index 022bcaa3b42e..ab6bf375a307 100644 --- a/arch/x86/kernel/tls.c +++ b/arch/x86/kernel/tls.c @@ -92,7 +92,7 @@ int do_set_thread_area(struct task_struct *p, int idx, asmlinkage int sys_set_thread_area(struct user_desc __user *u_info) { int ret = do_set_thread_area(current, -1, u_info, 1); - prevent_tail_call(ret); + asmlinkage_protect(1, ret, u_info); return ret; } @@ -142,7 +142,7 @@ int do_get_thread_area(struct task_struct *p, int idx, asmlinkage int sys_get_thread_area(struct user_desc __user *u_info) { int ret = do_get_thread_area(current, -1, u_info); - prevent_tail_call(ret); + asmlinkage_protect(1, ret, u_info); return ret; } diff --git a/fs/open.c b/fs/open.c index a4b12022edaa..3fa4e4ffce4c 100644 --- a/fs/open.c +++ b/fs/open.c @@ -335,7 +335,7 @@ asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length) { long ret = do_sys_ftruncate(fd, length, 1); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(2, ret, fd, length); return ret; } @@ -350,7 +350,7 @@ asmlinkage long sys_ftruncate64(unsigned int fd, loff_t length) { long ret = do_sys_ftruncate(fd, length, 0); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(2, ret, fd, length); return ret; } #endif @@ -1067,7 +1067,7 @@ asmlinkage long sys_open(const char __user *filename, int flags, int mode) ret = do_sys_open(AT_FDCWD, filename, flags, mode); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(3, ret, filename, flags, mode); return ret; } @@ -1081,7 +1081,7 @@ asmlinkage long sys_openat(int dfd, const char __user *filename, int flags, ret = do_sys_open(dfd, filename, flags, mode); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(4, ret, dfd, filename, flags, mode); return ret; } diff --git a/include/asm-x86/linkage.h b/include/asm-x86/linkage.h index 31739c7d66a9..d605eeba0f70 100644 --- a/include/asm-x86/linkage.h +++ b/include/asm-x86/linkage.h @@ -8,12 +8,34 @@ #ifdef CONFIG_X86_32 #define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0))) -#define prevent_tail_call(ret) __asm__ ("" : "=r" (ret) : "0" (ret)) /* * For 32-bit UML - mark functions implemented in assembly that use * regparm input parameters: */ #define asmregparm __attribute__((regparm(3))) + +#define asmlinkage_protect(n, ret, args...) \ + __asmlinkage_protect##n(ret, ##args) +#define __asmlinkage_protect_n(ret, args...) \ + __asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args) +#define __asmlinkage_protect0(ret) \ + __asmlinkage_protect_n(ret) +#define __asmlinkage_protect1(ret, arg1) \ + __asmlinkage_protect_n(ret, "g" (arg1)) +#define __asmlinkage_protect2(ret, arg1, arg2) \ + __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2)) +#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \ + __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3)) +#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \ + __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \ + "g" (arg4)) +#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \ + __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \ + "g" (arg4), "g" (arg5)) +#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \ + __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \ + "g" (arg4), "g" (arg5), "g" (arg6)) + #endif #ifdef CONFIG_X86_ALIGNMENT_16 diff --git a/include/linux/linkage.h b/include/linux/linkage.h index 0592936344c4..fe2a39c489b6 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -17,8 +17,8 @@ # define asmregparm #endif -#ifndef prevent_tail_call -# define prevent_tail_call(ret) do { } while (0) +#ifndef asmlinkage_protect +# define asmlinkage_protect(n, ret, args...) do { } while (0) #endif #ifndef __ALIGN diff --git a/kernel/exit.c b/kernel/exit.c index 53872bf993fa..073005b1cfb2 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -1608,7 +1608,7 @@ asmlinkage long sys_waitid(int which, pid_t upid, put_pid(pid); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(5, ret, which, upid, infop, options, ru); return ret; } @@ -1640,7 +1640,7 @@ asmlinkage long sys_wait4(pid_t upid, int __user *stat_addr, put_pid(pid); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(4, ret, upid, stat_addr, options, ru); return ret; } diff --git a/kernel/uid16.c b/kernel/uid16.c index dd308ba4e03b..3e41c1673e2f 100644 --- a/kernel/uid16.c +++ b/kernel/uid16.c @@ -21,7 +21,7 @@ asmlinkage long sys_chown16(const char __user * filename, old_uid_t user, old_gi { long ret = sys_chown(filename, low2highuid(user), low2highgid(group)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(3, ret, filename, user, group); return ret; } @@ -29,7 +29,7 @@ asmlinkage long sys_lchown16(const char __user * filename, old_uid_t user, old_g { long ret = sys_lchown(filename, low2highuid(user), low2highgid(group)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(3, ret, filename, user, group); return ret; } @@ -37,7 +37,7 @@ asmlinkage long sys_fchown16(unsigned int fd, old_uid_t user, old_gid_t group) { long ret = sys_fchown(fd, low2highuid(user), low2highgid(group)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(3, ret, fd, user, group); return ret; } @@ -45,7 +45,7 @@ asmlinkage long sys_setregid16(old_gid_t rgid, old_gid_t egid) { long ret = sys_setregid(low2highgid(rgid), low2highgid(egid)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(2, ret, rgid, egid); return ret; } @@ -53,7 +53,7 @@ asmlinkage long sys_setgid16(old_gid_t gid) { long ret = sys_setgid(low2highgid(gid)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(1, ret, gid); return ret; } @@ -61,7 +61,7 @@ asmlinkage long sys_setreuid16(old_uid_t ruid, old_uid_t euid) { long ret = sys_setreuid(low2highuid(ruid), low2highuid(euid)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(2, ret, ruid, euid); return ret; } @@ -69,7 +69,7 @@ asmlinkage long sys_setuid16(old_uid_t uid) { long ret = sys_setuid(low2highuid(uid)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(1, ret, uid); return ret; } @@ -78,7 +78,7 @@ asmlinkage long sys_setresuid16(old_uid_t ruid, old_uid_t euid, old_uid_t suid) long ret = sys_setresuid(low2highuid(ruid), low2highuid(euid), low2highuid(suid)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(3, ret, ruid, euid, suid); return ret; } @@ -98,7 +98,7 @@ asmlinkage long sys_setresgid16(old_gid_t rgid, old_gid_t egid, old_gid_t sgid) long ret = sys_setresgid(low2highgid(rgid), low2highgid(egid), low2highgid(sgid)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(3, ret, rgid, egid, sgid); return ret; } @@ -117,7 +117,7 @@ asmlinkage long sys_setfsuid16(old_uid_t uid) { long ret = sys_setfsuid(low2highuid(uid)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(1, ret, uid); return ret; } @@ -125,7 +125,7 @@ asmlinkage long sys_setfsgid16(old_gid_t gid) { long ret = sys_setfsgid(low2highgid(gid)); /* avoid REGPARM breakage on x86: */ - prevent_tail_call(ret); + asmlinkage_protect(1, ret, gid); return ret; } From 598af051a79d05b751fe793f1fe09fcf74763e02 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 10 Apr 2008 15:38:45 -0700 Subject: [PATCH 101/187] asmlinkage_protect sys_io_getevents Use asmlinkage_protect in sys_io_getevents, because GCC for i386 with CONFIG_FRAME_POINTER=n can decide to clobber an argument word on the stack, i.e. the user struct pt_regs. Here the problem is not a tail call, but just the compiler's use of the stack when it inlines and optimizes the body of the called function. This seems to avoid it. Signed-off-by: Roland McGrath Signed-off-by: Linus Torvalds --- fs/aio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/aio.c b/fs/aio.c index 6af921940622..60a4cd4d1137 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1790,6 +1790,7 @@ asmlinkage long sys_io_getevents(aio_context_t ctx_id, put_ioctx(ioctx); } + asmlinkage_protect(5, ret, ctx_id, min_nr, nr, events, timeout); return ret; } From d10d89ec78114f925f63c5126a2b2490f501a462 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 10 Apr 2008 17:35:23 -0700 Subject: [PATCH 102/187] Add commentary about the new "asmlinkage_protect()" macro It's really a pretty ugly thing to need, and some day it will hopefully be obviated by teaching gcc about the magic calling conventions for the low-level system call code, but in the meantime we can at least add big honking comments about why we need these insane and strange macros. I took my comments from my version of the macro, but I ended up deciding to just pick Roland's version of the actual code instead (with his prettier syntax that uses vararg macros). Thus the previous two commits that actually implement it. Signed-off-by: Linus Torvalds --- include/asm-x86/linkage.h | 11 +++++++++++ include/linux/linkage.h | 13 +++++++++++++ 2 files changed, 24 insertions(+) diff --git a/include/asm-x86/linkage.h b/include/asm-x86/linkage.h index d605eeba0f70..c048353f4b85 100644 --- a/include/asm-x86/linkage.h +++ b/include/asm-x86/linkage.h @@ -14,6 +14,17 @@ */ #define asmregparm __attribute__((regparm(3))) +/* + * Make sure the compiler doesn't do anything stupid with the + * arguments on the stack - they are owned by the *caller*, not + * the callee. This just fools gcc into not spilling into them, + * and keeps it from doing tailcall recursion and/or using the + * stack slots for temporaries, since they are live and "used" + * all the way to the end of the function. + * + * NOTE! On x86-64, all the arguments are in registers, so this + * only matters on a 32-bit kernel. + */ #define asmlinkage_protect(n, ret, args...) \ __asmlinkage_protect##n(ret, ##args) #define __asmlinkage_protect_n(ret, args...) \ diff --git a/include/linux/linkage.h b/include/linux/linkage.h index fe2a39c489b6..b163c5c40dbc 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -17,6 +17,19 @@ # define asmregparm #endif +/* + * This is used by architectures to keep arguments on the stack + * untouched by the compiler by keeping them live until the end. + * The argument stack may be owned by the assembly-language + * caller, not the callee, and gcc doesn't always understand + * that. + * + * We have the return value, and a maximum of six arguments. + * + * This should always be followed by a "return ret" for the + * protection to work (ie no more work that the compiler might + * end up needing stack temporaries for). + */ #ifndef asmlinkage_protect # define asmlinkage_protect(n, ret, args...) do { } while (0) #endif From 852fb2ac76241868454d07818ea0d87fcd9e5301 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 11 Apr 2008 12:07:04 +0200 Subject: [PATCH 103/187] i2c-ibm_iic: Fast mode parm desc fixup Noticed this when grepping for fast mode module params, the i2c-ibm_iic driver was using a non-existent variable for MODULE_PARM_DESC. Fix it up to reflect what it's actually supposed to be describing. Signed-off-by: Paul Mundt Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ibm_iic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 7c7eb0cfeceb..22bb247d0e60 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -55,7 +55,7 @@ MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); static int iic_force_fast; module_param(iic_force_fast, bool, 0); -MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)"); +MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)"); #define DBG_LEVEL 0 From b73a9aece56594bdb73712c8b9a8a4ad05fdeb33 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Fri, 11 Apr 2008 12:07:05 +0200 Subject: [PATCH 104/187] i2c-davinci: Fix lost interrupt DAVINCI_I2C_STR_REG is a write 1 to clear register, so don't use a read/modify/write cycle. Signed-off-by: Troy Kisky Acked-by: Dirk Behme Signed-off-by: Kevin Hilman Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-davinci.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index cce5a614758d..fde26345a379 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -382,9 +382,8 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) break; case DAVINCI_I2C_IVR_ARDY: - w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG); - MOD_REG_BIT(w, DAVINCI_I2C_STR_ARDY, 1); - davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w); + davinci_i2c_write_reg(dev, + DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY); complete(&dev->cmd_complete); break; @@ -397,12 +396,9 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) if (dev->buf_len) continue; - w = davinci_i2c_read_reg(dev, - DAVINCI_I2C_STR_REG); - MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 0); davinci_i2c_write_reg(dev, - DAVINCI_I2C_STR_REG, - w); + DAVINCI_I2C_STR_REG, + DAVINCI_I2C_IMR_RRDY); } else dev_err(dev->dev, "RDR IRQ while no " "data requested\n"); @@ -428,9 +424,8 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) break; case DAVINCI_I2C_IVR_SCD: - w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG); - MOD_REG_BIT(w, DAVINCI_I2C_STR_SCD, 1); - davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w); + davinci_i2c_write_reg(dev, + DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD); complete(&dev->cmd_complete); break; From fa16eefd3e835dd81c688a2a743eb59331162ed5 Mon Sep 17 00:00:00 2001 From: Till Harbaum Date: Fri, 11 Apr 2008 12:07:05 +0200 Subject: [PATCH 105/187] i2c-tiny-usb: New VID/PID pair I have recently bought some USB PIDs from EZPrototypes for my USB projects and one will be for the i2c-tiny-usb. I have not yet started to use the new one in the official i2c-tiny-usb firmware since i think it makes sense to get the change into the kernel before releasing a modified firmware. This patch adds support for the EZPrototypes USB vid/pid pair used in later i2c-tiny-usb firmware versions (avrusb v1.06 and up, usbtiny v2.06 and up). Signed-off-by: Till Harbaum Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-tiny-usb.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c index cb9abe7565a7..b1c050ff311d 100644 --- a/drivers/i2c/busses/i2c-tiny-usb.c +++ b/drivers/i2c/busses/i2c-tiny-usb.c @@ -131,11 +131,15 @@ static const struct i2c_algorithm usb_algorithm = { /* ----- begin of usb layer ---------------------------------------------- */ -/* The usb i2c interface uses a vid/pid pair donated by */ -/* Future Technology Devices International Ltd. */ +/* + * Initially the usb i2c interface uses a vid/pid pair donated by + * Future Technology Devices International Ltd., later a pair was + * bought from EZPrototypes + */ static struct usb_device_id i2c_tiny_usb_table [] = { - { USB_DEVICE(0x0403, 0xc631) }, - { } /* Terminating entry */ + { USB_DEVICE(0x0403, 0xc631) }, /* FTDI */ + { USB_DEVICE(0x1c40, 0x0534) }, /* EZPrototypes */ + { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table); From b6c3006d204a0b86e1ebe02ca38f9f071a03c7ef Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Thu, 10 Apr 2008 21:29:16 -0700 Subject: [PATCH 106/187] cgroups: include hierarchy ids in /proc//cgroup Extend the /proc//cgroup file to include the appropriate hierarchy ID on each line. Currently this ID isn't really needed since a hierarchy can be completely identified by the set of subsystems bound to it, but this is likely to change in the near future in order to support stateless subsystems and merging/rebinding of subsystems. Getting this change into 2.6.25 reduces the need for an API change later. Signed-off-by: Paul Menage Cc: Balbir Singh Cc: Pavel Emelyanov Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 62f1a5231fe9..2727f9238359 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2569,6 +2569,7 @@ static int proc_cgroup_show(struct seq_file *m, void *v) /* Skip this hierarchy if it has no active subsystems */ if (!root->actual_subsys_bits) continue; + seq_printf(m, "%lu:", root->subsys_bits); for_each_subsys(root, ss) seq_printf(m, "%s%s", count++ ? "," : "", ss->name); seq_putc(m, ':'); From d479540dbaba6f7acdb48e0242fee868c7a68116 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 10 Apr 2008 21:29:18 -0700 Subject: [PATCH 107/187] rtc: rtc-s35390a.c needs the bitreverse library rtc-s35390a uses BITREVERSE functions so it needs to select that config symbol to ensure that the functions are built. drivers/built-in.o: In function `s35390a_set_datetime': linux-2.6.25-rc8-git7/drivers/rtc/rtc-s35390a.c:144: undefined reference to `byte_rev_table' drivers/built-in.o: In function `s35390a_get_datetime': linux-2.6.25-rc8-git7/drivers/rtc/rtc-s35390a.c:163: undefined reference to `byte_rev_table' Signed-off-by: Randy Dunlap Acked-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 9e7de63b26ef..02a4c8cf2b2d 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -252,6 +252,7 @@ config RTC_DRV_TWL92330 config RTC_DRV_S35390A tristate "Seiko Instruments S-35390A" + select BITREVERSE help If you say yes here you will get support for the Seiko Instruments S-35390A. From 8d1c98b0b5c0148b519c6416e689ef6a89ffcea3 Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Thu, 10 Apr 2008 21:29:19 -0700 Subject: [PATCH 108/187] eventfd/kaio integration fix Jeff Roberson discovered a race when using kaio eventfd based notifications. When it occurs it can lead tomissed wakeups and hung userspace. This patch fixes the race by moving the notification inside the spinlocked section of kaio. The operation is safe since eventfd spinlock and kaio one are unrelated. Signed-off-by: Davide Libenzi Cc: Zach Brown Cc: Jeff Roberson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/aio.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index 60a4cd4d1137..228368610dfa 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -936,14 +936,6 @@ int aio_complete(struct kiocb *iocb, long res, long res2) return 1; } - /* - * Check if the user asked us to deliver the result through an - * eventfd. The eventfd_signal() function is safe to be called - * from IRQ context. - */ - if (!IS_ERR(iocb->ki_eventfd)) - eventfd_signal(iocb->ki_eventfd, 1); - info = &ctx->ring_info; /* add a completion event to the ring buffer. @@ -992,6 +984,15 @@ int aio_complete(struct kiocb *iocb, long res, long res2) kunmap_atomic(ring, KM_IRQ1); pr_debug("added to ring %p at [%lu]\n", iocb, tail); + + /* + * Check if the user asked us to deliver the result through an + * eventfd. The eventfd_signal() function is safe to be called + * from IRQ context. + */ + if (!IS_ERR(iocb->ki_eventfd)) + eventfd_signal(iocb->ki_eventfd, 1); + put_rq: /* everything turned out well, dispose of the aiocb. */ ret = __aio_put_req(ctx, iocb); From 7e38c3c4453bdb5ffdf8bf0ff0d9a760540f0893 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 10 Apr 2008 21:29:20 -0700 Subject: [PATCH 109/187] spi: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable SPI platform drivers, to allow module auto loading. [dbrownell@users.sourceforge.net: more drivers: registration fixes] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/atmel_spi.c | 1 + drivers/spi/au1550_spi.c | 3 +++ drivers/spi/mpc52xx_psc_spi.c | 3 +++ drivers/spi/omap2_mcspi.c | 3 +++ drivers/spi/omap_uwire.c | 4 +++- drivers/spi/pxa2xx_spi.c | 2 +- drivers/spi/spi_bfin5xx.c | 2 +- drivers/spi/spi_imx.c | 4 +++- drivers/spi/spi_mpc83xx.c | 5 +++-- drivers/spi/spi_s3c24xx.c | 2 +- drivers/spi/spi_s3c24xx_gpio.c | 2 ++ drivers/spi/spi_sh_sci.c | 1 + drivers/spi/spi_txx9.c | 3 +++ drivers/spi/xilinx_spi.c | 3 +++ 14 files changed, 31 insertions(+), 7 deletions(-) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 85687aaf9cab..1749a27be066 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -863,3 +863,4 @@ module_exit(atmel_spi_exit); MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver"); MODULE_AUTHOR("Haavard Skinnemoen "); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_spi"); diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c index 41a3d00c4515..072c4a595334 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/au1550_spi.c @@ -958,6 +958,9 @@ static int __exit au1550_spi_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:au1550-spi"); + static struct platform_driver au1550_spi_drv = { .remove = __exit_p(au1550_spi_remove), .driver = { diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index a86315a0c5b8..90729469d481 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -500,6 +500,9 @@ static int __exit mpc52xx_psc_spi_remove(struct platform_device *dev) return mpc52xx_psc_spi_do_remove(&dev->dev); } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:mpc52xx-psc-spi"); + static struct platform_driver mpc52xx_psc_spi_platform_driver = { .remove = __exit_p(mpc52xx_psc_spi_remove), .driver = { diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index a6ba11afb03f..b1cc148036c1 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -1084,6 +1084,9 @@ static int __exit omap2_mcspi_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:omap2_mcspi"); + static struct platform_driver omap2_mcspi_driver = { .driver = { .name = "omap2_mcspi", diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index 8245b5153f30..5f00bd6500ef 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -537,10 +537,12 @@ static int __exit uwire_remove(struct platform_device *pdev) return status; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:omap_uwire"); + static struct platform_driver uwire_driver = { .driver = { .name = "omap_uwire", - .bus = &platform_bus_type, .owner = THIS_MODULE, }, .remove = __exit_p(uwire_remove), diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 59deed79e0ab..147e26a78d64 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -44,6 +44,7 @@ MODULE_AUTHOR("Stephen Street"); MODULE_DESCRIPTION("PXA2xx SSP SPI Controller"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-spi"); #define MAX_BUSES 3 @@ -1581,7 +1582,6 @@ static int pxa2xx_spi_resume(struct platform_device *pdev) static struct platform_driver driver = { .driver = { .name = "pxa2xx-spi", - .bus = &platform_bus_type, .owner = THIS_MODULE, }, .remove = pxa2xx_spi_remove, diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 6635e15e5a7a..a9ac1fdb3094 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1396,7 +1396,7 @@ static int bfin5xx_spi_resume(struct platform_device *pdev) #define bfin5xx_spi_resume NULL #endif /* CONFIG_PM */ -MODULE_ALIAS("bfin-spi-master"); /* for platform bus hotplug */ +MODULE_ALIAS("platform:bfin-spi"); static struct platform_driver bfin5xx_spi_driver = { .driver = { .name = DRV_NAME, diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 1b0647124933..d4ba640366b6 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -1722,10 +1722,12 @@ static int spi_imx_resume(struct platform_device *pdev) #define spi_imx_resume NULL #endif /* CONFIG_PM */ +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:spi_imx"); + static struct platform_driver driver = { .driver = { .name = "spi_imx", - .bus = &platform_bus_type, .owner = THIS_MODULE, }, .remove = __exit_p(spi_imx_remove), diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index 04f7cd9fc261..be15a6213205 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -523,11 +523,12 @@ static int __exit mpc83xx_spi_remove(struct platform_device *dev) return 0; } -MODULE_ALIAS("mpc83xx_spi"); /* for platform bus hotplug */ +MODULE_ALIAS("platform:mpc83xx_spi"); static struct platform_driver mpc83xx_spi_driver = { .remove = __exit_p(mpc83xx_spi_remove), .driver = { - .name = "mpc83xx_spi", + .name = "mpc83xx_spi", + .owner = THIS_MODULE, }, }; diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 6e834b8b9d27..e75103aac790 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -415,7 +415,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev) #define s3c24xx_spi_resume NULL #endif -MODULE_ALIAS("s3c2410_spi"); /* for platform bus hotplug */ +MODULE_ALIAS("platform:s3c2410-spi"); static struct platform_driver s3c24xx_spidrv = { .remove = __exit_p(s3c24xx_spi_remove), .suspend = s3c24xx_spi_suspend, diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c index 82ae7d7eca38..e33f6145c560 100644 --- a/drivers/spi/spi_s3c24xx_gpio.c +++ b/drivers/spi/spi_s3c24xx_gpio.c @@ -168,6 +168,8 @@ static int s3c2410_spigpio_remove(struct platform_device *dev) #define s3c2410_spigpio_suspend NULL #define s3c2410_spigpio_resume NULL +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:spi_s3c24xx_gpio"); static struct platform_driver s3c2410_spigpio_drv = { .probe = s3c2410_spigpio_probe, diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c index 3dbe71b16d60..7d36720eb982 100644 --- a/drivers/spi/spi_sh_sci.c +++ b/drivers/spi/spi_sh_sci.c @@ -203,3 +203,4 @@ module_exit(sh_sci_spi_exit); MODULE_DESCRIPTION("SH SCI SPI Driver"); MODULE_AUTHOR("Magnus Damm "); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:spi_sh_sci"); diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c index 363ac8e68821..2296f37ea3c6 100644 --- a/drivers/spi/spi_txx9.c +++ b/drivers/spi/spi_txx9.c @@ -450,6 +450,9 @@ static int __exit txx9spi_remove(struct platform_device *dev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:spi_txx9"); + static struct platform_driver txx9spi_driver = { .remove = __exit_p(txx9spi_remove), .driver = { diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 5d04f520c123..cf6aef34fe25 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -408,6 +408,9 @@ static int __devexit xilinx_spi_remove(struct platform_device *dev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:" XILINX_SPI_NAME); + static struct platform_driver xilinx_spi_driver = { .probe = xilinx_spi_probe, .remove = __devexit_p(xilinx_spi_remove), From f34c32f13ce8c539f3f582562358e39a86b00e83 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 10 Apr 2008 21:29:21 -0700 Subject: [PATCH 110/187] usb gadget: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable usb peripheral drivers, to re-eable module auto loading. [dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/usb/gadget/at91_udc.c | 1 + drivers/usb/gadget/atmel_usba_udc.c | 2 ++ drivers/usb/gadget/fsl_usb2_udc.c | 1 + drivers/usb/gadget/lh7a40x_udc.c | 1 + drivers/usb/gadget/m66592-udc.c | 2 ++ drivers/usb/gadget/omap_udc.c | 2 +- drivers/usb/gadget/pxa2xx_udc.c | 2 +- drivers/usb/gadget/s3c2410_udc.c | 2 ++ 8 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index a83e8b798ec9..fd15ced899d8 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1884,3 +1884,4 @@ module_exit(udc_exit_module); MODULE_DESCRIPTION("AT91 udc driver"); MODULE_AUTHOR("Thomas Rathbone, David Brownell"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at91_udc"); diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index af8b2a3a2d4a..b0db4c31d018 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -2054,6 +2054,7 @@ static struct platform_driver udc_driver = { .remove = __exit_p(usba_udc_remove), .driver = { .name = "atmel_usba_udc", + .owner = THIS_MODULE, }, }; @@ -2072,3 +2073,4 @@ module_exit(udc_exit); MODULE_DESCRIPTION("Atmel USBA UDC driver"); MODULE_AUTHOR("Haavard Skinnemoen "); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_usba_udc"); diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 63e8fa3a69e1..254012ad2b91 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -2475,3 +2475,4 @@ module_exit(udc_exit); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:fsl-usb2-udc"); diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index 37243ef7104e..078f72467671 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -2146,3 +2146,4 @@ module_exit(udc_exit); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lh7a40x_udc"); diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 835948f0715a..ee6b35fa870f 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -35,6 +35,7 @@ MODULE_DESCRIPTION("M66592 USB gadget driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Yoshihiro Shimoda"); +MODULE_ALIAS("platform:m66592_udc"); #define DRIVER_VERSION "18 Oct 2007" @@ -1671,6 +1672,7 @@ static struct platform_driver m66592_driver = { .remove = __exit_p(m66592_remove), .driver = { .name = (char *) udc_name, + .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index e6d68bda428a..ee1e9a314cd1 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -3109,4 +3109,4 @@ module_exit(udc_exit); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - +MODULE_ALIAS("platform:omap_udc"); diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 096c41cc40d1..c00cd8b9d3d1 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -2380,4 +2380,4 @@ module_exit(udc_exit); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); MODULE_LICENSE("GPL"); - +MODULE_ALIAS("platform:pxa2xx-udc"); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index aadc4204d6f9..6b1ef488043b 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -2047,3 +2047,5 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c2410-usbgadget"); +MODULE_ALIAS("platform:s3c2440-usbgadget"); From f4fce61d410b96ae263b001c45f73df1863dad8d Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 10 Apr 2008 21:29:22 -0700 Subject: [PATCH 111/187] usb host: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable USB HCDs, to allow re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/usb/host/isp116x-hcd.c | 8 ++++++-- drivers/usb/host/ohci-at91.c | 3 +-- drivers/usb/host/ohci-au1xxx.c | 1 + drivers/usb/host/ohci-ep93xx.c | 2 ++ drivers/usb/host/ohci-lh7a404.c | 1 + drivers/usb/host/ohci-omap.c | 1 + drivers/usb/host/ohci-pnx4008.c | 4 ++++ drivers/usb/host/ohci-pnx8550.c | 5 +++-- drivers/usb/host/ohci-ppc-soc.c | 1 + drivers/usb/host/ohci-pxa27x.c | 3 +++ drivers/usb/host/ohci-s3c2410.c | 1 + drivers/usb/host/ohci-sh.c | 1 + drivers/usb/host/ohci-sm501.c | 1 + drivers/usb/host/r8a66597-hcd.c | 2 ++ drivers/usb/host/sl811-hcd.c | 1 + drivers/usb/host/u132-hcd.c | 1 + 16 files changed, 30 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index d7071c855758..203a3359a648 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1684,14 +1684,18 @@ static int isp116x_resume(struct platform_device *dev) #endif +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:isp116x-hcd"); + static struct platform_driver isp116x_driver = { .probe = isp116x_probe, .remove = isp116x_remove, .suspend = isp116x_suspend, .resume = isp116x_resume, .driver = { - .name = (char *)hcd_name, - }, + .name = (char *)hcd_name, + .owner = THIS_MODULE, + }, }; /*-----------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 126fcbdd6408..d72dc07dda01 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -355,7 +355,7 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev) #define ohci_hcd_at91_drv_resume NULL #endif -MODULE_ALIAS("at91_ohci"); +MODULE_ALIAS("platform:at91_ohci"); static struct platform_driver ohci_hcd_at91_driver = { .probe = ohci_hcd_at91_drv_probe, @@ -368,4 +368,3 @@ static struct platform_driver ohci_hcd_at91_driver = { .owner = THIS_MODULE, }, }; - diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 663a0600b6e7..f90fe0c7373f 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -345,3 +345,4 @@ static struct platform_driver ohci_hcd_au1xxx_driver = { }, }; +MODULE_ALIAS("platform:au1xxx-ohci"); diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index a68ce9d3c525..156e93a9d0df 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -211,6 +211,8 @@ static struct platform_driver ohci_hcd_ep93xx_driver = { #endif .driver = { .name = "ep93xx-ohci", + .owner = THIS_MODULE, }, }; +MODULE_ALIAS("platform:ep93xx-ohci"); diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 4a043abd85ea..13c12ed22252 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -251,3 +251,4 @@ static struct platform_driver ohci_hcd_lh7a404_driver = { }, }; +MODULE_ALIAS("platform:lh7a404-ohci"); diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 74e1f4be10bb..7bfca1ed1b58 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -544,3 +544,4 @@ static struct platform_driver ohci_hcd_omap_driver = { }, }; +MODULE_ALIAS("platform:ohci"); diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index 6c52c66b659f..28b458f20cc3 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -456,9 +456,13 @@ static int usb_hcd_pnx4008_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:usb-ohci"); + static struct platform_driver usb_hcd_pnx4008_driver = { .driver = { .name = "usb-ohci", + .owner = THIS_MODULE, }, .probe = usb_hcd_pnx4008_probe, .remove = usb_hcd_pnx4008_remove, diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c index 85fdfd2a7ad0..605d59cba28e 100644 --- a/drivers/usb/host/ohci-pnx8550.c +++ b/drivers/usb/host/ohci-pnx8550.c @@ -230,11 +230,12 @@ static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev) return 0; } -MODULE_ALIAS("pnx8550-ohci"); +MODULE_ALIAS("platform:pnx8550-ohci"); static struct platform_driver ohci_hcd_pnx8550_driver = { .driver = { - .name = "pnx8550-ohci", + .name = "pnx8550-ohci", + .owner = THIS_MODULE, }, .probe = ohci_hcd_pnx8550_drv_probe, .remove = ohci_hcd_pnx8550_drv_remove, diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index f95be1896b0d..523c30125577 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -213,3 +213,4 @@ static struct platform_driver ohci_hcd_ppc_soc_driver = { }, }; +MODULE_ALIAS("platform:ppc-soc-ohci"); diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index ff9a79843471..8ad9b3b604b5 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -364,6 +364,8 @@ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev) } #endif +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:pxa27x-ohci"); static struct platform_driver ohci_hcd_pxa27x_driver = { .probe = ohci_hcd_pxa27x_drv_probe, @@ -375,6 +377,7 @@ static struct platform_driver ohci_hcd_pxa27x_driver = { #endif .driver = { .name = "pxa27x-ohci", + .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 44b79e8a6e25..ead4772f0f27 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -501,3 +501,4 @@ static struct platform_driver ohci_hcd_s3c2410_driver = { }, }; +MODULE_ALIAS("platform:s3c2410-ohci"); diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c index 5309ac039e15..e7ee607278fe 100644 --- a/drivers/usb/host/ohci-sh.c +++ b/drivers/usb/host/ohci-sh.c @@ -141,3 +141,4 @@ static struct platform_driver ohci_hcd_sh_driver = { }, }; +MODULE_ALIAS("platform:sh_ohci"); diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index a97070142869..4ea92762fb28 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -262,3 +262,4 @@ static struct platform_driver ohci_hcd_sm501_driver = { .name = "sm501-usb", }, }; +MODULE_ALIAS("platform:sm501-usb"); diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 0ce2fc5e396b..9f80e5285575 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -44,6 +44,7 @@ MODULE_DESCRIPTION("R8A66597 USB Host Controller Driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Yoshihiro Shimoda"); +MODULE_ALIAS("platform:r8a66597_hcd"); #define DRIVER_VERSION "29 May 2007" @@ -2219,6 +2220,7 @@ static struct platform_driver r8a66597_driver = { .resume = r8a66597_resume, .driver = { .name = (char *) hcd_name, + .owner = THIS_MODULE, }, }; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 59be276ccd9d..629bca0ebe8f 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -58,6 +58,7 @@ MODULE_DESCRIPTION("SL811HS USB Host Controller Driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sl811-hcd"); #define DRIVER_VERSION "19 May 2005" diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 3033d6945202..8e117a795e93 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3316,3 +3316,4 @@ static void __exit u132_hcd_exit(void) module_exit(u132_hcd_exit); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:u132_hcd"); From f37d193c7c150c40059c7ce5de34e8b28a9cd4ae Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 10 Apr 2008 21:29:23 -0700 Subject: [PATCH 112/187] watchdog: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable watchdog drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers; registration fixes] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Cc: Wim Van Sebroeck Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/watchdog/at32ap700x_wdt.c | 3 +++ drivers/watchdog/at91rm9200_wdt.c | 1 + drivers/watchdog/davinci_wdt.c | 2 ++ drivers/watchdog/ks8695_wdt.c | 1 + drivers/watchdog/mpc83xx_wdt.c | 2 ++ drivers/watchdog/mpcore_wdt.c | 3 +++ drivers/watchdog/mtx-1_wdt.c | 2 ++ drivers/watchdog/mv64x60_wdt.c | 1 + drivers/watchdog/omap_wdt.c | 1 + drivers/watchdog/pnx4008_wdt.c | 2 ++ drivers/watchdog/s3c2410_wdt.c | 1 + drivers/watchdog/txx9wdt.c | 1 + 12 files changed, 20 insertions(+) diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index fb5ed6478f78..ae0fca5e8749 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -418,6 +418,9 @@ static int at32_wdt_resume(struct platform_device *pdev) #define at32_wdt_resume NULL #endif +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:at32_wdt"); + static struct platform_driver at32_wdt_driver = { .remove = __exit_p(at32_wdt_remove), .suspend = at32_wdt_suspend, diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index a684b1e87372..9ff9a9565320 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -286,3 +286,4 @@ MODULE_AUTHOR("Andrew Victor"); MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:at91_wdt"); diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index a61cbd48dc07..1782c79eff06 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -248,6 +248,7 @@ static int davinci_wdt_remove(struct platform_device *pdev) static struct platform_driver platform_wdt_driver = { .driver = { .name = "watchdog", + .owner = THIS_MODULE, }, .probe = davinci_wdt_probe, .remove = davinci_wdt_remove, @@ -277,3 +278,4 @@ MODULE_PARM_DESC(heartbeat, MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:watchdog"); diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index e3a29c302309..df5a6b811ccd 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -306,3 +306,4 @@ MODULE_AUTHOR("Andrew Victor"); MODULE_DESCRIPTION("Watchdog driver for KS8695"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:ks8695_wdt"); diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c index 6369f569517f..b16c5cd972eb 100644 --- a/drivers/watchdog/mpc83xx_wdt.c +++ b/drivers/watchdog/mpc83xx_wdt.c @@ -206,6 +206,7 @@ static struct platform_driver mpc83xx_wdt_driver = { .remove = __devexit_p(mpc83xx_wdt_remove), .driver = { .name = "mpc83xx_wdt", + .owner = THIS_MODULE, }, }; @@ -226,3 +227,4 @@ MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:mpc83xx_wdt"); diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 0d2b27735419..009573b81496 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -392,6 +392,9 @@ static int __devexit mpcore_wdt_remove(struct platform_device *dev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:mpcore_wdt"); + static struct platform_driver mpcore_wdt_driver = { .probe = mpcore_wdt_probe, .remove = __devexit_p(mpcore_wdt_remove), diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index 10b89f2703bd..a8e67383784e 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -243,6 +243,7 @@ static struct platform_driver mtx1_wdt = { .probe = mtx1_wdt_probe, .remove = mtx1_wdt_remove, .driver.name = "mtx1-wdt", + .driver.owner = THIS_MODULE, }; static int __init mtx1_wdt_init(void) @@ -262,3 +263,4 @@ MODULE_AUTHOR("Michael Stickel, Florian Fainelli"); MODULE_DESCRIPTION("Driver for the MTX-1 watchdog"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:mtx1-wdt"); diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c index 0365c317f7e1..b59ca3273967 100644 --- a/drivers/watchdog/mv64x60_wdt.c +++ b/drivers/watchdog/mv64x60_wdt.c @@ -324,3 +324,4 @@ MODULE_AUTHOR("James Chapman "); MODULE_DESCRIPTION("MV64x60 watchdog driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:" MV64x60_WDT_NAME); diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 635ca454f56b..74bc39aa1ce8 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -387,3 +387,4 @@ module_exit(omap_wdt_exit); MODULE_AUTHOR("George G. Davis"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:omap_wdt"); diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index b04aa096a10a..6b8483d3c783 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -321,6 +321,7 @@ static int pnx4008_wdt_remove(struct platform_device *pdev) static struct platform_driver platform_wdt_driver = { .driver = { .name = "watchdog", + .owner = THIS_MODULE, }, .probe = pnx4008_wdt_probe, .remove = pnx4008_wdt_remove, @@ -354,3 +355,4 @@ MODULE_PARM_DESC(nowayout, MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:watchdog"); diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 7645e8812156..98532c0e0689 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -561,3 +561,4 @@ MODULE_AUTHOR("Ben Dooks , " MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:s3c2410-wdt"); diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index 328b3c7211ef..57cefef27ce3 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -274,3 +274,4 @@ module_exit(watchdog_exit); MODULE_DESCRIPTION("TXx9 Watchdog Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:txx9wdt"); From ad28a07bcadc5945f7a90d9de3a196825e69d9d3 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 10 Apr 2008 21:29:25 -0700 Subject: [PATCH 113/187] rtc: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable RTC platform drivers, to re-enable module auto loading. [dbrownell@users.sourceforge.net: more drivers, minor fix] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Cc: Greg KH Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-at32ap700x.c | 2 +- drivers/rtc/rtc-at91rm9200.c | 1 + drivers/rtc/rtc-bfin.c | 1 + drivers/rtc/rtc-cmos.c | 3 +++ drivers/rtc/rtc-ds1216.c | 1 + drivers/rtc/rtc-ds1511.c | 3 +++ drivers/rtc/rtc-ds1553.c | 3 +++ drivers/rtc/rtc-ds1742.c | 1 + drivers/rtc/rtc-ep93xx.c | 3 +++ drivers/rtc/rtc-m48t59.c | 3 +++ drivers/rtc/rtc-m48t86.c | 1 + drivers/rtc/rtc-omap.c | 2 +- drivers/rtc/rtc-rs5c313.c | 1 + drivers/rtc/rtc-s3c.c | 1 + drivers/rtc/rtc-sa1100.c | 1 + drivers/rtc/rtc-sh.c | 1 + drivers/rtc/rtc-stk17ta8.c | 3 +++ drivers/rtc/rtc-v3020.c | 1 + drivers/rtc/rtc-vr41xx.c | 3 +++ 19 files changed, 33 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index d3b9b14267ab..42244f14b41c 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -290,7 +290,7 @@ static int __exit at32_rtc_remove(struct platform_device *pdev) return 0; } -MODULE_ALIAS("at32ap700x_rtc"); +MODULE_ALIAS("platform:at32ap700x_rtc"); static struct platform_driver at32_rtc_driver = { .remove = __exit_p(at32_rtc_remove), diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 33795e5a5595..52abffc86bcd 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -407,3 +407,4 @@ module_exit(at91_rtc_exit); MODULE_AUTHOR("Rick Bronson"); MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at91_rtc"); diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c index d90ba860d216..4f28045d9ef2 100644 --- a/drivers/rtc/rtc-bfin.c +++ b/drivers/rtc/rtc-bfin.c @@ -470,3 +470,4 @@ module_exit(bfin_rtc_exit); MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver"); MODULE_AUTHOR("Mike Frysinger "); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:rtc-bfin"); diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index f3ee2ad566b4..b48517021ee6 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -943,6 +943,9 @@ static void cmos_platform_shutdown(struct platform_device *pdev) cmos_do_shutdown(); } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:rtc_cmos"); + static struct platform_driver cmos_platform_driver = { .remove = __exit_p(cmos_platform_remove), .shutdown = cmos_platform_shutdown, diff --git a/drivers/rtc/rtc-ds1216.c b/drivers/rtc/rtc-ds1216.c index 83efb88f8f23..0b17770b032b 100644 --- a/drivers/rtc/rtc-ds1216.c +++ b/drivers/rtc/rtc-ds1216.c @@ -221,6 +221,7 @@ MODULE_AUTHOR("Thomas Bogendoerfer "); MODULE_DESCRIPTION("DS1216 RTC driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:rtc-ds1216"); module_init(ds1216_rtc_init); module_exit(ds1216_rtc_exit); diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c index d74b8086fa31..d08912f18ddd 100644 --- a/drivers/rtc/rtc-ds1511.c +++ b/drivers/rtc/rtc-ds1511.c @@ -626,6 +626,9 @@ ds1511_rtc_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:ds1511"); + static struct platform_driver ds1511_rtc_driver = { .probe = ds1511_rtc_probe, .remove = __devexit_p(ds1511_rtc_remove), diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c index d9e848dcd450..a19f11415540 100644 --- a/drivers/rtc/rtc-ds1553.c +++ b/drivers/rtc/rtc-ds1553.c @@ -391,6 +391,9 @@ static int __devexit ds1553_rtc_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:rtc-ds1553"); + static struct platform_driver ds1553_rtc_driver = { .probe = ds1553_rtc_probe, .remove = __devexit_p(ds1553_rtc_remove), diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c index 2e73f0b183b2..24d35ede2dbf 100644 --- a/drivers/rtc/rtc-ds1742.c +++ b/drivers/rtc/rtc-ds1742.c @@ -276,3 +276,4 @@ MODULE_AUTHOR("Atsushi Nemoto "); MODULE_DESCRIPTION("Dallas DS1742 RTC driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:rtc-ds1742"); diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c index ef4f147f3c0c..1e99325270df 100644 --- a/drivers/rtc/rtc-ep93xx.c +++ b/drivers/rtc/rtc-ep93xx.c @@ -132,6 +132,9 @@ static int __devexit ep93xx_rtc_remove(struct platform_device *dev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:ep93xx-rtc"); + static struct platform_driver ep93xx_rtc_platform_driver = { .driver = { .name = "ep93xx-rtc", diff --git a/drivers/rtc/rtc-m48t59.c b/drivers/rtc/rtc-m48t59.c index cd0bbc0e8038..013e6c103b9c 100644 --- a/drivers/rtc/rtc-m48t59.c +++ b/drivers/rtc/rtc-m48t59.c @@ -465,6 +465,9 @@ static int __devexit m48t59_rtc_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:rtc-m48t59"); + static struct platform_driver m48t59_rtc_driver = { .driver = { .name = "rtc-m48t59", diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c index 8ff4a1221f59..3f7f99a5d96a 100644 --- a/drivers/rtc/rtc-m48t86.c +++ b/drivers/rtc/rtc-m48t86.c @@ -199,6 +199,7 @@ MODULE_AUTHOR("Alessandro Zummo "); MODULE_DESCRIPTION("M48T86 RTC driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:rtc-m48t86"); module_init(m48t86_rtc_init); module_exit(m48t86_rtc_exit); diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index a2f84f169588..58f81c774943 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -497,7 +497,7 @@ static void omap_rtc_shutdown(struct platform_device *pdev) rtc_write(0, OMAP_RTC_INTERRUPTS_REG); } -MODULE_ALIAS("omap_rtc"); +MODULE_ALIAS("platform:omap_rtc"); static struct platform_driver omap_rtc_driver = { .probe = omap_rtc_probe, .remove = __devexit_p(omap_rtc_remove), diff --git a/drivers/rtc/rtc-rs5c313.c b/drivers/rtc/rtc-rs5c313.c index 66eb133bf5fd..664e89a817ed 100644 --- a/drivers/rtc/rtc-rs5c313.c +++ b/drivers/rtc/rtc-rs5c313.c @@ -421,3 +421,4 @@ MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR("kogiidena , Nobuhiro Iwamatsu "); MODULE_DESCRIPTION("Ricoh RS5C313 RTC device driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 86766f1f2496..9f4d5129a496 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -592,3 +592,4 @@ module_exit(s3c_rtc_exit); MODULE_DESCRIPTION("Samsung S3C RTC Driver"); MODULE_AUTHOR("Ben Dooks "); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c2410-rtc"); diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index ee253cc45de1..82f62d25f921 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -399,3 +399,4 @@ module_exit(sa1100_rtc_exit); MODULE_AUTHOR("Richard Purdie "); MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sa1100-rtc"); diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index c1d6a1880ccf..9e9caa5d7f5f 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -664,3 +664,4 @@ MODULE_DESCRIPTION("SuperH on-chip RTC driver"); MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR("Paul Mundt , Jamie Lenehan "); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c index a265da7c6ff8..31d3c8c28588 100644 --- a/drivers/rtc/rtc-stk17ta8.c +++ b/drivers/rtc/rtc-stk17ta8.c @@ -394,6 +394,9 @@ static int __devexit stk17ta8_rtc_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:stk17ta8"); + static struct platform_driver stk17ta8_rtc_driver = { .probe = stk17ta8_rtc_probe, .remove = __devexit_p(stk17ta8_rtc_remove), diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index a6b572978dc0..24203a06051a 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -264,3 +264,4 @@ module_exit(v3020_exit); MODULE_DESCRIPTION("V3020 RTC"); MODULE_AUTHOR("Raphael Assenat"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:v3020"); diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c index ce2f78de7a80..be9c70d0b193 100644 --- a/drivers/rtc/rtc-vr41xx.c +++ b/drivers/rtc/rtc-vr41xx.c @@ -422,6 +422,9 @@ static int __devexit rtc_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:RTC"); + static struct platform_driver rtc_platform_driver = { .probe = rtc_probe, .remove = __devexit_p(rtc_remove), From 231bc2a222411f43bfb0fbb6d64c0f34c7b1039f Mon Sep 17 00:00:00 2001 From: Mike Pagano Date: Thu, 10 Apr 2008 21:29:26 -0700 Subject: [PATCH 114/187] cciss: error: implicit declaration of function 'sg_init_table' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds the missing include directive to the cciss.c source file.   This was discovered by our release team when building the kernel for the Alpha architecture. Errors were found as references to functions 'sg_init_table' and 'sg_page' do not exist without the include for Alpha. Signed-off-by: Mike Pagano Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 55bd35c0f082..9c9627e8e334 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -50,6 +50,7 @@ #include #include #include +#include #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) #define DRIVER_NAME "HP CISS Driver (v 3.6.14)" From bd2ab67030e9116f1e4aae1289220255412b37fd Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 10 Apr 2008 21:29:27 -0700 Subject: [PATCH 115/187] md: close a livelock window in handle_parity_checks5 If a failure is detected after a parity check operation has been initiated, but before it completes handle_parity_checks5 will never quiesce operations on the stripe. Explicitly handle this case by "canceling" the parity check, i.e. clear the STRIPE_OP_CHECK flags and queue the stripe on the handle list again to refresh any non-uptodate blocks. Kernel versions >= 2.6.23 are susceptible. Cc: Cc: NeilBrown Signed-off-by: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/raid5.c | 55 ++++++++++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 24 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c574cf5efb5c..b162b839a662 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2348,25 +2348,15 @@ static void handle_issuing_new_write_requests6(raid5_conf_t *conf, static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh, struct stripe_head_state *s, int disks) { - set_bit(STRIPE_HANDLE, &sh->state); - /* Take one of the following actions: - * 1/ start a check parity operation if (uptodate == disks) - * 2/ finish a check parity operation and act on the result - * 3/ skip to the writeback section if we previously - * initiated a recovery operation - */ - if (s->failed == 0 && - !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) { - if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) { - BUG_ON(s->uptodate != disks); - clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags); - sh->ops.count++; - s->uptodate--; - } else if ( - test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) { - clear_bit(STRIPE_OP_CHECK, &sh->ops.ack); - clear_bit(STRIPE_OP_CHECK, &sh->ops.pending); + int canceled_check = 0; + set_bit(STRIPE_HANDLE, &sh->state); + + /* complete a check operation */ + if (test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) { + clear_bit(STRIPE_OP_CHECK, &sh->ops.ack); + clear_bit(STRIPE_OP_CHECK, &sh->ops.pending); + if (s->failed == 0) { if (sh->ops.zero_sum_result == 0) /* parity is correct (on disc, * not in buffer any more) @@ -2391,7 +2381,8 @@ static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh, s->uptodate++; } } - } + } else + canceled_check = 1; /* STRIPE_INSYNC is not set */ } /* check if we can clear a parity disk reconstruct */ @@ -2404,12 +2395,28 @@ static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh, clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending); } - /* Wait for check parity and compute block operations to complete - * before write-back + /* start a new check operation if there are no failures, the stripe is + * not insync, and a repair is not in flight */ - if (!test_bit(STRIPE_INSYNC, &sh->state) && - !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) && - !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) { + if (s->failed == 0 && + !test_bit(STRIPE_INSYNC, &sh->state) && + !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) { + if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) { + BUG_ON(s->uptodate != disks); + clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags); + sh->ops.count++; + s->uptodate--; + } + } + + /* Wait for check parity and compute block operations to complete + * before write-back. If a failure occurred while the check operation + * was in flight we need to cycle this stripe through handle_stripe + * since the parity block may not be uptodate + */ + if (!canceled_check && !test_bit(STRIPE_INSYNC, &sh->state) && + !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) && + !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) { struct r5dev *dev; /* either failed parity check, or recovery is happening */ if (s->failed == 0) From 544451a1a36b06f43fc67112ede3b92e6203eb9d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 10 Apr 2008 21:29:28 -0700 Subject: [PATCH 116/187] pnp: increase number of devices supported per protocol Increase the PNP "number of devices" limit. We currently use an unsigned char, which limits us to 256 devices per protocol. This patch changes that to an unsigned int. Not all backends can take advantage of this: we limit ISAPNP to 10 devices in isapnp_cfg_begin(), and PNPBIOS is limited to 256 devices because the BIOS interfaces use a one-byte device node number. But there is no limit on the number of PNPACPI devices we may have. Large HP Integrity machines have more than 256, which causes the current "unsigned char number" to wrap around. This causes errors like this: pnp: PnP ACPI init kobject_add failed for 00:00 with -EEXIST, don't try to register things with the same name in the same directory. Call Trace: [] show_stack+0x40/0xa0 [] dump_stack+0x30/0x60 [] kobject_add+0x290/0x2c0 [] device_add+0x160/0x860 [] device_register+0x30/0x60 [] __pnp_add_device+0x130/0x180 [] pnp_add_device+0xb0/0xe0 [] pnpacpi_add_device+0x510/0x5a0 [] pnpacpi_add_device_handler+0x50/0x80 This patch increases the limit to fix this PNPACPI problem. It should not have any adverse effect on ISAPNP or PNPBIOS because their limits are still enforced in the backends. Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pnp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 29dd55838e84..b2f05c230f4b 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -175,7 +175,7 @@ static inline void pnp_set_card_drvdata(struct pnp_card_link *pcard, void *data) struct pnp_dev { struct device dev; /* Driver Model device interface */ u64 dma_mask; - unsigned char number; /* used as an index, must be unique */ + unsigned int number; /* used as an index, must be unique */ int status; struct list_head global_list; /* node in global list of devices */ From 0859ab59a8a48d2a96b9d2b7100889bcb6bb5818 Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Thu, 10 Apr 2008 21:29:29 -0700 Subject: [PATCH 117/187] signalfd: fix for incorrect SI_QUEUE user data reporting Michael Kerrisk found out that signalfd was not reporting back user data pushed using sigqueue: http://groups.google.com/group/linux.kernel/msg/9397cab8551e3123 The following patch makes signalfd report back the ssi_ptr and ssi_int members of the signalfd_siginfo structure. Signed-off-by: Davide Libenzi Acked-by: Michael Kerrisk Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/signalfd.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/signalfd.c b/fs/signalfd.c index cb2b63ae0bf4..8ead0db35933 100644 --- a/fs/signalfd.c +++ b/fs/signalfd.c @@ -111,9 +111,14 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo, err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid); err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr); break; - default: /* this is just in case for now ... */ + default: + /* + * This case catches also the signals queued by sigqueue(). + */ err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid); err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid); + err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr); + err |= __put_user(kinfo->si_int, &uinfo->ssi_int); break; } From b0fac02370cffad956ff3de5e8ed4df7e7b875d7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 11 Apr 2008 13:46:54 +0200 Subject: [PATCH 118/187] Fix "$(AS) -traditional" compile breakage caused by asmlinkage_protect git commit 54a015104136974262afa4b8ddd943ea70dec8a2 ("asmlinkage_protect replaces prevent_tail_call") causes this build failure on s390: AS arch/s390/kernel/entry64.o In file included from arch/s390/kernel/entry64.S:14: include/linux/linkage.h:34: error: syntax error in macro parameter list make[1]: *** [arch/s390/kernel/entry64.o] Error 1 make: *** [arch/s390/kernel] Error 2 and some other architectures. The reason is that some architectures add the "-traditional" flag to the invocation of $(AS), which disables variadic macro argument support. So just surround the new define with an #ifndef __ASSEMBLY__ to prevent any side effects on asm code. Cc: Roland McGrath Cc: Martin Schwidefsky Signed-off-by: Heiko Carstens Signed-off-by: Linus Torvalds --- include/linux/linkage.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/linkage.h b/include/linux/linkage.h index b163c5c40dbc..2119610b24f8 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -30,9 +30,12 @@ * protection to work (ie no more work that the compiler might * end up needing stack temporaries for). */ +/* Assembly files may be compiled with -traditional .. */ +#ifndef __ASSEMBLY__ #ifndef asmlinkage_protect # define asmlinkage_protect(n, ret, args...) do { } while (0) #endif +#endif #ifndef __ALIGN #define __ALIGN .align 4,0x90 From dc07e721a26ec7e0adb66340f1763d220cfbbd0c Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 7 Apr 2008 15:59:05 -0400 Subject: [PATCH 119/187] Spell out behavior of atomic_dec_and_lock() in kerneldoc A little more detail here wouldn't hurt. Signed-off-by: J. Bruce Fields Signed-off-by: Jonathan Corbet --- include/linux/spinlock.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 576a5f77d3bd..1129ee0a7180 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -341,6 +341,9 @@ static inline void double_spin_unlock(spinlock_t *l1, spinlock_t *l2, * atomic_dec_and_lock - lock on reaching reference count zero * @atomic: the atomic counter * @lock: the spinlock in question + * + * Decrements @atomic by 1. If the result is 0, returns true and locks + * @lock. Returns false for all other cases. */ extern int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock); #define atomic_dec_and_lock(atomic, lock) \ From 6ded55da6be9f186ae1022724a5881b43846c164 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 7 Apr 2008 15:59:03 -0400 Subject: [PATCH 120/187] Documentation: move nfsroot.txt to filesystems/ Documentation/ is a little large, and filesystems/ seems an obvious place for this file. Signed-off-by: J. Bruce Fields Signed-off-by: Jonathan Corbet --- Documentation/00-INDEX | 2 -- Documentation/filesystems/00-INDEX | 2 ++ Documentation/{ => filesystems}/nfsroot.txt | 0 Documentation/kernel-parameters.txt | 6 +++--- fs/Kconfig | 8 ++++---- net/ipv4/Kconfig | 8 ++++---- net/ipv4/ipconfig.c | 2 +- 7 files changed, 14 insertions(+), 14 deletions(-) rename Documentation/{ => filesystems}/nfsroot.txt (100%) diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index fc8e7c7d182f..08a39cdb27f2 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -271,8 +271,6 @@ netlabel/ - directory with information on the NetLabel subsystem. networking/ - directory with info on various aspects of networking with Linux. -nfsroot.txt - - short guide on setting up a diskless box with NFS root filesystem. nmi_watchdog.txt - info on NMI watchdog for SMP systems. nommu-mmap.txt diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index e731196410b3..2ec174c992f1 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -66,6 +66,8 @@ mandatory-locking.txt - info on the Linux implementation of Sys V mandatory file locking. ncpfs.txt - info on Novell Netware(tm) filesystem using NCP protocol. +nfsroot.txt + - short guide on setting up a diskless box with NFS root filesystem. ntfs.txt - info and mount options for the NTFS filesystem (Windows NT). ocfs2.txt diff --git a/Documentation/nfsroot.txt b/Documentation/filesystems/nfsroot.txt similarity index 100% rename from Documentation/nfsroot.txt rename to Documentation/filesystems/nfsroot.txt diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 508e2a2c9864..57709e472b9b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -845,7 +845,7 @@ and is between 256 and 4096 characters. It is defined in the file arch/alpha/kernel/core_marvel.c. ip= [IP_PNP] - See Documentation/nfsroot.txt. + See Documentation/filesystems/nfsroot.txt. ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards See comment before ip2_setup() in @@ -1199,10 +1199,10 @@ and is between 256 and 4096 characters. It is defined in the file file if at all. nfsaddrs= [NFS] - See Documentation/nfsroot.txt. + See Documentation/filesystems/nfsroot.txt. nfsroot= [NFS] nfs root filesystem for disk-less boxes. - See Documentation/nfsroot.txt. + See Documentation/filesystems/nfsroot.txt. nfs.callback_tcpport= [NFS] set the TCP port on which the NFSv4 callback diff --git a/fs/Kconfig b/fs/Kconfig index d7312825592b..c509123bea49 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1744,10 +1744,10 @@ config ROOT_NFS If you want your Linux box to mount its whole root file system (the one containing the directory /) from some other computer over the net via NFS (presumably because your box doesn't have a hard disk), - say Y. Read for details. It is - likely that in this case, you also want to say Y to "Kernel level IP - autoconfiguration" so that your box can discover its network address - at boot time. + say Y. Read for + details. It is likely that in this case, you also want to say Y to + "Kernel level IP autoconfiguration" so that your box can discover + its network address at boot time. Most people say N here. diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 9c7e5ffb223d..4670683b4688 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -160,7 +160,7 @@ config IP_PNP_DHCP If unsure, say Y. Note that if you want to use DHCP, a DHCP server must be operating on your network. Read - for details. + for details. config IP_PNP_BOOTP bool "IP: BOOTP support" @@ -175,7 +175,7 @@ config IP_PNP_BOOTP does BOOTP itself, providing all necessary information on the kernel command line, you can say N here. If unsure, say Y. Note that if you want to use BOOTP, a BOOTP server must be operating on your network. - Read for details. + Read for details. config IP_PNP_RARP bool "IP: RARP support" @@ -187,8 +187,8 @@ config IP_PNP_RARP discovered automatically at boot time using the RARP protocol (an older protocol which is being obsoleted by BOOTP and DHCP), say Y here. Note that if you want to use RARP, a RARP server must be - operating on your network. Read for - details. + operating on your network. Read + for details. # not yet ready.. # bool ' IP: ARP support' CONFIG_IP_PNP_ARP diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 7c992fbbc2c3..4824fe8996bf 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -1411,7 +1411,7 @@ late_initcall(ip_auto_config); /* * Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel - * command line parameter. See Documentation/nfsroot.txt. + * command line parameter. See Documentation/filesystems/nfsroot.txt. */ static int __init ic_proto_name(char *name) { From 8bcd1cc293f4e76edbfd8f422770c80a018b82d9 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 7 Apr 2008 15:59:04 -0400 Subject: [PATCH 121/187] Documentation: move rpc-cache.txt to filesystems/ This file is nfs-related. (Maybe Documentation/filesystems/ would benefit from a separate nfs/ directory at some point.) Signed-off-by: J. Bruce Fields Signed-off-by: Jonathan Corbet --- Documentation/00-INDEX | 2 -- Documentation/filesystems/00-INDEX | 2 ++ Documentation/{ => filesystems}/rpc-cache.txt | 0 3 files changed, 2 insertions(+), 2 deletions(-) rename Documentation/{ => filesystems}/rpc-cache.txt (100%) diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 08a39cdb27f2..e8fb24671967 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -319,8 +319,6 @@ robust-futexes.txt - a description of what robust futexes are. rocket.txt - info on the Comtrol RocketPort multiport serial driver. -rpc-cache.txt - - introduction to the caching mechanisms in the sunrpc layer. rt-mutex-design.txt - description of the RealTime mutex implementation design. rt-mutex.txt diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 2ec174c992f1..52cd611277a3 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -84,6 +84,8 @@ relay.txt - info on relay, for efficient streaming from kernel to user space. romfs.txt - description of the ROMFS filesystem. +rpc-cache.txt + - introduction to the caching mechanisms in the sunrpc layer. seq_file.txt - how to use the seq_file API sharedsubtree.txt diff --git a/Documentation/rpc-cache.txt b/Documentation/filesystems/rpc-cache.txt similarity index 100% rename from Documentation/rpc-cache.txt rename to Documentation/filesystems/rpc-cache.txt From d396c5f158547e50c2b78bc984cb4a72d76e969b Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 7 Apr 2008 16:39:38 -0400 Subject: [PATCH 122/187] Move sched-rt-group.txt to scheduler/ Signed-off-by: J. Bruce Fields Signed-off-by: Jonathan Corbet --- Documentation/scheduler/00-INDEX | 2 ++ Documentation/{ => scheduler}/sched-rt-group.txt | 0 2 files changed, 2 insertions(+) rename Documentation/{ => scheduler}/sched-rt-group.txt (100%) diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX index b5f5ca069b2d..fc234d093fbf 100644 --- a/Documentation/scheduler/00-INDEX +++ b/Documentation/scheduler/00-INDEX @@ -12,5 +12,7 @@ sched-domains.txt - information on scheduling domains. sched-nice-design.txt - How and why the scheduler's nice levels are implemented. +sched-rt-group.txt + - real-time group scheduling. sched-stats.txt - information on schedstats (Linux Scheduler Statistics). diff --git a/Documentation/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt similarity index 100% rename from Documentation/sched-rt-group.txt rename to Documentation/scheduler/sched-rt-group.txt From 14dadf1d5eb5bea2dd115852cfee880505c1c169 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Thu, 10 Apr 2008 13:55:21 -0700 Subject: [PATCH 123/187] Add additional examples in Documentation/spinlocks.txt Checkpatch will throw an error if code doesn't use the correct initializers for static spinlocks: ERROR: Use of SPIN_LOCK_UNLOCKED is deprecated: see Documentation/spinlocks.txt This is fine, but Documentation/spinlocks.txt isn't very clear on how to _use_ the new initializers for static variables. To save people time in the future, I added two small examples of how to fix old-style static initializers to be more lockdep friendly. Signed-off-by: Mark Fasheh Signed-off-by: Jonathan Corbet --- Documentation/spinlocks.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt index 471e75389778..619699dde593 100644 --- a/Documentation/spinlocks.txt +++ b/Documentation/spinlocks.txt @@ -5,6 +5,28 @@ Please use DEFINE_SPINLOCK()/DEFINE_RWLOCK() or __SPIN_LOCK_UNLOCKED()/__RW_LOCK_UNLOCKED() as appropriate for static initialization. +Most of the time, you can simply turn: + + static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED; + +into: + + static DEFINE_SPINLOCK(xxx_lock); + +Static structure member variables go from: + + struct foo bar { + .lock = SPIN_LOCK_UNLOCKED; + }; + +to: + + struct foo bar { + .lock = __SPIN_LOCK_UNLOCKED(bar.lock); + }; + +Declaration of static rw_locks undergo a similar transformation. + Dynamic initialization, when necessary, may be performed as demonstrated below. From 120dd64cacd4fb796bca0acba3665553f1d9ecaa Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 11 Apr 2008 13:32:29 -0700 Subject: [PATCH 124/187] Linux 2.6.25-rc9 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index fec2a12710eb..21c76f715bf5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 25 -EXTRAVERSION = -rc8 +EXTRAVERSION = -rc9 NAME = Funky Weasel is Jiggy wit it # *DOCUMENTATION* From aeb74914ef0e6746f15b11c0399048de9c5c05b8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 12 Apr 2008 00:11:35 -0400 Subject: [PATCH 125/187] [libata] sata_svw: fix reversed port count According to Broadcom, two chips have their port counts flipped. The proper count is: 0x241 is 8 ports 0x242 is 4 ports Reported by Yohei Honda on kernel bz 10424. Signed-off-by: Jeff Garzik --- drivers/ata/sata_svw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 840d1c4a7850..019e367b59fc 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -531,8 +531,8 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en * */ static const struct pci_device_id k2_sata_pci_tbl[] = { { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw8 }, + { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 }, + { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 }, From 1892225f788a73beae2ec26f6f2fa4cd2e5868d0 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 11 Apr 2008 20:28:27 +0300 Subject: [PATCH 126/187] [libata] make ali_atapi_dma static This patch makes the needlessly global ali_atapi_dma static. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/ata/pata_ali.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index ce830fe3a362..511a830b6256 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -36,7 +36,7 @@ #define DRV_NAME "pata_ali" #define DRV_VERSION "0.7.5" -int ali_atapi_dma = 0; +static int ali_atapi_dma = 0; module_param_named(atapi_dma, ali_atapi_dma, int, 0644); MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)"); From e2df9e0905136eebeca66eb9a994ca48d0fa7990 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 14 Apr 2008 08:50:02 +0200 Subject: [PATCH 127/187] revert "sched: fix fair sleepers" revert "sched: fix fair sleepers" (e22ecef1d2658ba54ed7d3fdb5d60829fb434c23), because it is causing audio skipping, see: http://bugzilla.kernel.org/show_bug.cgi?id=10428 the patch is correct and the real cause of the skipping is not understood (tracing makes it go away), but time has run out so we'll revert it and re-try in 2.6.26. Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 86a93376282c..0080968d3e4a 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -510,10 +510,8 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) if (!initial) { /* sleeps upto a single latency don't count. */ - if (sched_feat(NEW_FAIR_SLEEPERS)) { - vruntime -= calc_delta_fair(sysctl_sched_latency, - &cfs_rq->load); - } + if (sched_feat(NEW_FAIR_SLEEPERS)) + vruntime -= sysctl_sched_latency; /* ensure we never gain time by being placed backwards. */ vruntime = max_vruntime(se->vruntime, vruntime); From 4f3f8e94b7b079131f0faf641e8afd790a6537d1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 14 Apr 2008 11:20:59 +0100 Subject: [PATCH 128/187] FRV: Correctly determine the address of an illegal instruction Correctly determine the address of an illegal instruction. The EPCR0 register holds this value (masked by EPCR0_PC) if the validity bit is set (masked by EPCR0_V). So the test as to whether the contents of the register are usable should be involve checking the _V bit, not the _PC bits. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/frv/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/frv/kernel/traps.c b/arch/frv/kernel/traps.c index 2f7e66877f3b..7089c2428b3f 100644 --- a/arch/frv/kernel/traps.c +++ b/arch/frv/kernel/traps.c @@ -73,7 +73,7 @@ asmlinkage void illegal_instruction(unsigned long esfr1, unsigned long epcr0, un epcr0, esr0, esfr1); info.si_errno = 0; - info.si_addr = (void *) ((epcr0 & EPCR0_PC) ? (epcr0 & EPCR0_PC) : __frame->pc); + info.si_addr = (void *) ((epcr0 & EPCR0_V) ? (epcr0 & EPCR0_PC) : __frame->pc); switch (__frame->tbr & TBR_TT) { case TBR_TT_ILLEGAL_INSTR: From 19e729a928172103e101ffd0829fd13e68c13f78 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 14 Apr 2008 15:03:02 -0400 Subject: [PATCH 129/187] locks: fix possible infinite loop in fcntl(F_SETLKW) over nfs Miklos Szeredi found the bug: "Basically what happens is that on the server nlm_fopen() calls nfsd_open() which returns -EACCES, to which nlm_fopen() returns NLM_LCK_DENIED. "On the client this will turn into a -EAGAIN (nlm_stat_to_errno()), which in will cause fcntl_setlk() to retry forever." So, for example, opening a file on an nfs filesystem, changing permissions to forbid further access, then trying to lock the file, could result in an infinite loop. And Trond Myklebust identified the culprit, from Marc Eshel and I: 7723ec9777d9832849b76475b1a21a2872a40d20 "locks: factor out generic/filesystem switch from setlock code" That commit claimed to just be reshuffling code, but actually introduced a behavioral change by calling the lock method repeatedly as long as it returned -EAGAIN. We assumed this would be safe, since we assumed a lock of type SETLKW would only return with either success or an error other than -EAGAIN. However, nfs does can in fact return -EAGAIN in this situation, and independently of whether that behavior is correct or not, we don't actually need this change, and it seems far safer not to depend on such assumptions about the filesystem's ->lock method. Therefore, revert the problematic part of the original commit. This leaves vfs_lock_file() and its other callers unchanged, while returning fcntl_setlk and fcntl_setlk64 to their former behavior. Signed-off-by: J. Bruce Fields Tested-by: Miklos Szeredi Cc: Trond Myklebust Cc: Marc Eshel Signed-off-by: Linus Torvalds --- fs/locks.c | 48 ++++++++++++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 20 deletions(-) diff --git a/fs/locks.c b/fs/locks.c index d83fab1b77b5..43c0af21a0c5 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -1801,17 +1801,21 @@ again: if (error) goto out; - for (;;) { - error = vfs_lock_file(filp, cmd, file_lock, NULL); - if (error != -EAGAIN || cmd == F_SETLK) - break; - error = wait_event_interruptible(file_lock->fl_wait, - !file_lock->fl_next); - if (!error) - continue; + if (filp->f_op && filp->f_op->lock != NULL) + error = filp->f_op->lock(filp, cmd, file_lock); + else { + for (;;) { + error = posix_lock_file(filp, file_lock, NULL); + if (error != -EAGAIN || cmd == F_SETLK) + break; + error = wait_event_interruptible(file_lock->fl_wait, + !file_lock->fl_next); + if (!error) + continue; - locks_delete_block(file_lock); - break; + locks_delete_block(file_lock); + break; + } } /* @@ -1925,17 +1929,21 @@ again: if (error) goto out; - for (;;) { - error = vfs_lock_file(filp, cmd, file_lock, NULL); - if (error != -EAGAIN || cmd == F_SETLK64) - break; - error = wait_event_interruptible(file_lock->fl_wait, - !file_lock->fl_next); - if (!error) - continue; + if (filp->f_op && filp->f_op->lock != NULL) + error = filp->f_op->lock(filp, cmd, file_lock); + else { + for (;;) { + error = posix_lock_file(filp, file_lock, NULL); + if (error != -EAGAIN || cmd == F_SETLK64) + break; + error = wait_event_interruptible(file_lock->fl_wait, + !file_lock->fl_next); + if (!error) + continue; - locks_delete_block(file_lock); - break; + locks_delete_block(file_lock); + break; + } } /* From 066a3b5b2346febf9a655b444567b7138e3bb939 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Mon, 14 Apr 2008 15:10:42 -0700 Subject: [PATCH 130/187] [NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop TC_H_MAJ(parentid) for root classes is the same as for ingress, and if ingress qdisc is created qdisc_lookup() returns its pointer (without ingress NULL is returned). After this all qdisc_lookups give the same, and we get endless loop. (I don't know how this could hide for so long - it should trigger with every leaf class deleted if it's qdisc isn't empty.) After this fix qdisc_lookup() is omitted both for ingress and root parents, but looking for root is only wasting a little time here... Many thanks to Enrico Demarin for finding a test for catching this bug, which probably bothered quite a lot of admins. Reported-by: Enrico Demarin , Signed-off-by: Jarek Poplawski Acked-by: Patrick McHardy Signed-off-by: David S. Miller --- net/sched/sch_api.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 7e3c048ba9b1..fc8708a0a25e 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -386,6 +386,9 @@ void qdisc_tree_decrease_qlen(struct Qdisc *sch, unsigned int n) if (n == 0) return; while ((parentid = sch->parent)) { + if (TC_H_MAJ(parentid) == TC_H_MAJ(TC_H_INGRESS)) + return; + sch = qdisc_lookup(sch->dev, TC_H_MAJ(parentid)); if (sch == NULL) { WARN_ON(parentid != TC_H_ROOT); From abe2f41430770270a1512bf78f489284bfbdbd04 Mon Sep 17 00:00:00 2001 From: Alexey Korolev Date: Mon, 14 Apr 2008 20:45:06 +0100 Subject: [PATCH 131/187] JFFS2 Fix of panics caused by wrong condition for hole frag creation in write_begin This fixes a regression introduced in commit 205c109a7a96d9a3d8ffe64c4068b70811fef5e8 when switching to write_begin/write_end operations in JFFS2. The page offset is miscalculated, leading to corruption of the fragment lists and subsequently to memory corruption and panics. [ Side note: the bug is a fairly direct result of the naming. Nick was likely misled by the use of "offs", since we tend to use the notion of "offset" not as an absolute position, but as an offset _within_ a page or allocation. Alternatively, a "pgoff_t" is a page index, but not a byte offset - our VM naming can be a bit confusing. So in this case, a VM person would likely have called this a "pos", not an "offs", or perhaps talked about byte offsets rather than page offsets (since it's counted in bytes, not pages). - Linus ] Signed-off-by: Alexey Korolev Signed-off-by: Vasiliy Leonenko Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- fs/jffs2/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c index f9c5dd6f4b64..dcc2734e0b5d 100644 --- a/fs/jffs2/file.c +++ b/fs/jffs2/file.c @@ -129,7 +129,7 @@ static int jffs2_write_begin(struct file *filp, struct address_space *mapping, struct inode *inode = mapping->host; struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode); pgoff_t index = pos >> PAGE_CACHE_SHIFT; - uint32_t pageofs = pos & (PAGE_CACHE_SIZE - 1); + uint32_t pageofs = index << PAGE_CACHE_SHIFT; int ret = 0; pg = __grab_cache_page(mapping, index); From d237e5c7ce82b6c7e1aa50348520a0c5a47274fa Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 15 Apr 2008 09:25:33 +0200 Subject: [PATCH 132/187] io context: increment task attachment count in ioc_task_link() Thanks to Nikanth Karthikesan for reporting this. Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index cac4b364cd40..2b7a1187cb29 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -91,8 +91,10 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc) * if ref count is zero, don't allow sharing (ioc is going away, it's * a race). */ - if (ioc && atomic_inc_not_zero(&ioc->refcount)) + if (ioc && atomic_inc_not_zero(&ioc->refcount)) { + atomic_inc(&ioc->nr_tasks); return ioc; + } return NULL; } From b000cd3707e7b25d76745f9c0e261c23d21fa578 Mon Sep 17 00:00:00 2001 From: Vitaliy Gusev Date: Tue, 15 Apr 2008 00:33:38 -0700 Subject: [PATCH 133/187] [TCP]: Fix never pruned tcp out-of-order queue. tcp_prune_queue() doesn't prune an out-of-order queue at all. Therefore sk_rmem_schedule() can fail but the out-of-order queue isn't pruned . This can lead to tcp deadlock state if the next two conditions are held: 1. There are a sequence hole between last received in order segment and segments enqueued to the out-of-order queue. 2. Size of all segments in the out-of-order queue is more than tcp_mem[2]. Signed-off-by: Vitaliy Gusev Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 72 ++++++++++++++++++++++++++++---------------- 1 file changed, 46 insertions(+), 26 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 5119856017ab..61db7b1eb995 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3841,8 +3841,26 @@ static void tcp_ofo_queue(struct sock *sk) } } +static void tcp_prune_ofo_queue(struct sock *sk); static int tcp_prune_queue(struct sock *sk); +static inline int tcp_try_rmem_schedule(struct sock *sk, unsigned int size) +{ + if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf || + !sk_rmem_schedule(sk, size)) { + + if (tcp_prune_queue(sk) < 0) + return -1; + + if (!sk_rmem_schedule(sk, size)) { + tcp_prune_ofo_queue(sk); + if (!sk_rmem_schedule(sk, size)) + return -1; + } + } + return 0; +} + static void tcp_data_queue(struct sock *sk, struct sk_buff *skb) { struct tcphdr *th = tcp_hdr(skb); @@ -3892,12 +3910,9 @@ static void tcp_data_queue(struct sock *sk, struct sk_buff *skb) if (eaten <= 0) { queue_and_out: if (eaten < 0 && - (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf || - !sk_rmem_schedule(sk, skb->truesize))) { - if (tcp_prune_queue(sk) < 0 || - !sk_rmem_schedule(sk, skb->truesize)) - goto drop; - } + tcp_try_rmem_schedule(sk, skb->truesize)) + goto drop; + skb_set_owner_r(skb, sk); __skb_queue_tail(&sk->sk_receive_queue, skb); } @@ -3966,12 +3981,8 @@ drop: TCP_ECN_check_ce(tp, skb); - if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf || - !sk_rmem_schedule(sk, skb->truesize)) { - if (tcp_prune_queue(sk) < 0 || - !sk_rmem_schedule(sk, skb->truesize)) - goto drop; - } + if (tcp_try_rmem_schedule(sk, skb->truesize)) + goto drop; /* Disable header prediction. */ tp->pred_flags = 0; @@ -4198,6 +4209,28 @@ static void tcp_collapse_ofo_queue(struct sock *sk) } } +/* + * Purge the out-of-order queue. + */ +static void tcp_prune_ofo_queue(struct sock *sk) +{ + struct tcp_sock *tp = tcp_sk(sk); + + if (!skb_queue_empty(&tp->out_of_order_queue)) { + NET_INC_STATS_BH(LINUX_MIB_OFOPRUNED); + __skb_queue_purge(&tp->out_of_order_queue); + + /* Reset SACK state. A conforming SACK implementation will + * do the same at a timeout based retransmit. When a connection + * is in a sad state like this, we care only about integrity + * of the connection not performance. + */ + if (tp->rx_opt.sack_ok) + tcp_sack_reset(&tp->rx_opt); + sk_mem_reclaim(sk); + } +} + /* Reduce allocated memory if we can, trying to get * the socket within its memory limits again. * @@ -4231,20 +4264,7 @@ static int tcp_prune_queue(struct sock *sk) /* Collapsing did not help, destructive actions follow. * This must not ever occur. */ - /* First, purge the out_of_order queue. */ - if (!skb_queue_empty(&tp->out_of_order_queue)) { - NET_INC_STATS_BH(LINUX_MIB_OFOPRUNED); - __skb_queue_purge(&tp->out_of_order_queue); - - /* Reset SACK state. A conforming SACK implementation will - * do the same at a timeout based retransmit. When a connection - * is in a sad state like this, we care only about integrity - * of the connection not performance. - */ - if (tcp_is_sack(tp)) - tcp_sack_reset(&tp->rx_opt); - sk_mem_reclaim(sk); - } + tcp_prune_ofo_queue(sk); if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf) return 0; From d5d52273b92913399e78fc4877f89d38ef8b367a Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 15 Apr 2008 00:40:48 -0700 Subject: [PATCH 134/187] MAINTAINERS: isdn4linux@listserv.isdn4linux.de is subscribers-only https://www.isdn4linux.de/mailman/listinfo/isdn4linux: "To prevent spamming, you have to subscribe first. Mails from non-members are silently ignored!" Signed-off-by: Paul Bolle Signed-off-by: David S. Miller --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 90dcbbcad91c..23e1799c512f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2197,7 +2197,7 @@ S: Maintained ISDN SUBSYSTEM P: Karsten Keil M: kkeil@suse.de -L: isdn4linux@listserv.isdn4linux.de +L: isdn4linux@listserv.isdn4linux.de (subscribers-only) W: http://www.isdn4linux.de T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git S: Maintained @@ -2205,7 +2205,7 @@ S: Maintained ISDN SUBSYSTEM (Eicon active card driver) P: Armin Schindler M: mac@melware.de -L: isdn4linux@listserv.isdn4linux.de +L: isdn4linux@listserv.isdn4linux.de (subscribers-only) W: http://www.melware.de S: Maintained From 56690c2151d33534f0537fd03c533eda81d96f0f Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 15 Apr 2008 00:46:38 -0700 Subject: [PATCH 135/187] [CAN]: Update documentation of struct sockaddr_can The struct sockaddr_can has been simplified in the code review process. This patch updates this simplification also in the associated documentation in can.txt . Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- Documentation/networking/can.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index f1b2de170929..641d2afacffa 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -281,10 +281,10 @@ solution for a couple of reasons: sa_family_t can_family; int can_ifindex; union { - struct { canid_t rx_id, tx_id; } tp16; - struct { canid_t rx_id, tx_id; } tp20; - struct { canid_t rx_id, tx_id; } mcnet; - struct { canid_t rx_id, tx_id; } isotp; + /* transport protocol class address info (e.g. ISOTP) */ + struct { canid_t rx_id, tx_id; } tp; + + /* reserved for future CAN protocols address information */ } can_addr; }; From 0517deed78be9cc9ce9799bf15da58fd0d2078bb Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 15 Apr 2008 00:49:04 -0700 Subject: [PATCH 136/187] netconsole: only set CON_PRINTBUFFER if the user specifies a netconsole Since 0bcc1816188e570bde1d56a208996660f2633ae0 (netconsole: Support dynamic reconfiguration using configfs), the netconsole is always registered, regardless of whether the user actually specified a netconsole configuration on the command line. However because netconsole has CON_PRINTBUFFER set, when it is registered it causes the printk buffer to be replayed to all consoles. When there is no netconsole configured this is a) pointless, and b) somewhat annoying for the user of the existing console. So instead we should only set CON_PRINTBUFFER if there is a netconsole configuration found on the command line. This retains the existing behaviour if a netconsole is setup by the user, and avoids spamming other consoles when we're only registering for the dynamic netconsole case. Signed-off-by: Michael Ellerman Signed-off-by: David S. Miller --- drivers/net/netconsole.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 501e451be911..665341e43055 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -730,7 +730,7 @@ static void write_msg(struct console *con, const char *msg, unsigned int len) static struct console netconsole = { .name = "netcon", - .flags = CON_ENABLED | CON_PRINTBUFFER, + .flags = CON_ENABLED, .write = write_msg, }; @@ -749,6 +749,9 @@ static int __init init_netconsole(void) err = PTR_ERR(nt); goto fail; } + /* Dump existing printks when we register */ + netconsole.flags |= CON_PRINTBUFFER; + spin_lock_irqsave(&target_list_lock, flags); list_add(&nt->list, &target_list); spin_unlock_irqrestore(&target_list_lock, flags); From 75ce6faccdbbea4465876a759917d4994660c025 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 15 Apr 2008 10:23:35 +0200 Subject: [PATCH 137/187] block: update git url for blktrace Signed-off-by: Jens Axboe --- block/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/Kconfig b/block/Kconfig index 9bda7bc80307..7db9a411649d 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -38,7 +38,7 @@ config BLK_DEV_IO_TRACE on a block device queue. For more information (and the user space support tools needed), fetch the blktrace app from: - git://brick.kernel.dk/data/git/blktrace.git + git://git.kernel.dk/blktrace.git config LSF bool "Support for Large Single Files" From 50387b3e11075fe798f5d44fa1b5491788a8742a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 13 Apr 2008 21:15:38 +0300 Subject: [PATCH 138/187] sh64: add missing #include 's This patch fixes some compile errors due to missing save_fpu() prototypes on sh64 caused by commit 9bbafce2eec190ef7e44b0eb1095ba17ce6ad3af (sh: Fix occasional FPU register corruption under preempt). Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/kernel/process_64.c | 1 + arch/sh/kernel/ptrace_64.c | 1 + arch/sh/kernel/signal_64.c | 1 + arch/sh/kernel/traps_64.c | 1 + 4 files changed, 4 insertions(+) diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 046999b1d1af..0283d8133075 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -28,6 +28,7 @@ #include #include #include +#include struct task_struct *last_task_used_math = NULL; diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index f6fbdfa6876d..d453c47dc522 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -33,6 +33,7 @@ #include #include #include +#include /* This mask defines the bits of the SR which the user is not allowed to change, which are everything except S, Q, M, PR, SZ, FR. */ diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 80bde19d445b..552eb810cd85 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -26,6 +26,7 @@ #include #include #include +#include #define REG_RET 9 #define REG_ARG1 2 diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c index 1b58a7499087..a85831cbf18b 100644 --- a/arch/sh/kernel/traps_64.c +++ b/arch/sh/kernel/traps_64.c @@ -30,6 +30,7 @@ #include #include #include +#include #undef DEBUG_EXCEPTION #ifdef DEBUG_EXCEPTION From 85eee6072bae69acfab903df596b5f468df03470 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 16 Apr 2008 02:01:55 +0900 Subject: [PATCH 139/187] sh: fix compressed kernel build commit 54a015104136974262afa4b8ddd943ea70dec8a2 broke zImage build on sh arch: LD vmlinux SYSMAP System.map SYSMAP .tmp_System.map AS arch/sh/boot/compressed/head_32.o In file included from /k/arch/sh/boot/compressed/head_32.S:11: /k/include/linux/linkage.h:34: error: syntax error in macro parameter list Fix it for both sh and sh64. Signed-off-by: Manuel Lauss Signed-off-by: Paul Mundt --- arch/sh/boot/compressed/head_32.S | 1 - arch/sh/boot/compressed/head_64.S | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S index a8399b013729..06ac31f3be88 100644 --- a/arch/sh/boot/compressed/head_32.S +++ b/arch/sh/boot/compressed/head_32.S @@ -7,7 +7,6 @@ .text -#include #include .global startup diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S index 1d4ecbfc767c..f72c1989f5f2 100644 --- a/arch/sh/boot/compressed/head_64.S +++ b/arch/sh/boot/compressed/head_64.S @@ -13,7 +13,6 @@ * Modification for compressed loader: * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com) */ -#include #include #include #include From fad0f90134197259b5a935c69d7556ee847f242c Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 16 Apr 2008 02:03:51 +0900 Subject: [PATCH 140/187] sh: arch/sh/kernel/traps_32.c needs asm/fpu.h arch/sh/kernel/traps_32.c: In function `do_reserved_inst': arch/sh/kernel/traps_32.c:667: error: implicit declaration of function `do_fpu_inst' Signed-off-by: Andrew Morton Signed-off-by: Paul Mundt --- arch/sh/kernel/traps_32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index baa4fa368dce..e08b3bfeb656 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -25,6 +25,7 @@ #include #include #include +#include #ifdef CONFIG_SH_KGDB #include From fd785d6b18b930b76ad5076eed6e9af43195b281 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 16 Apr 2008 02:21:47 +0900 Subject: [PATCH 141/187] sh: export empty_zero_page ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! Signed-off-by: Andrew Morton Signed-off-by: Paul Mundt --- arch/sh/kernel/sh_ksyms_32.c | 1 + arch/sh/kernel/sh_ksyms_64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index d80de3903271..45bb333fd9ec 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -149,3 +149,4 @@ EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(_ebss); +EXPORT_SYMBOL(empty_zero_page); diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c index dd38a683de65..b6410ce4bd1d 100644 --- a/arch/sh/kernel/sh_ksyms_64.c +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -44,6 +44,7 @@ EXPORT_SYMBOL(__put_user_asm_l); EXPORT_SYMBOL(__get_user_asm_l); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__copy_user); +EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); From aa979a6acbb468b0ebe8cf36dc782a5b3cc1e28d Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Wed, 9 Apr 2008 16:38:31 -0300 Subject: [PATCH 142/187] rtl8187: Add missing priv->vif assignments This adds missing priv->vif assignments after "mac80211: don't use interface indices in drivers" change. As rtl8180, rtl8187 also needs priv->vif to be set, as without this an oops can happen in rtl8187_tx function (priv->vif is passed to ieee80211_rts_duration). Signed-off-by: Herton Ronaldo Krzesinski Acked-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187_dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index f44505994a0e..133b3f39eeb6 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -509,6 +509,8 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev, return -EOPNOTSUPP; } + priv->vif = conf->vif; + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); for (i = 0; i < ETH_ALEN; i++) rtl818x_iowrite8(priv, &priv->map->MAC[i], @@ -523,6 +525,7 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev, { struct rtl8187_priv *priv = dev->priv; priv->mode = IEEE80211_IF_TYPE_MNTR; + priv->vif = NULL; } static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) From 385f848a986b4677bc91e5f5f9033449a876819d Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Sun, 6 Apr 2008 17:10:53 +0200 Subject: [PATCH 143/187] b43legacy: fix initvals loading on bcm4303 This allows for the correct initial values to be uploaded to bcm4303 devices. It should be correct, but I can't reliably test this as I suspect there's something going wrong with an hardware rfkill switch on my laptop. Please test. Signed-off-by: Stefano Brivio Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 5f3f34e1dbfd..0f7a6e7bd96a 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -1488,6 +1488,7 @@ static int b43legacy_request_firmware(struct b43legacy_wldev *dev) } if (!fw->initvals) { switch (dev->phy.type) { + case B43legacy_PHYTYPE_B: case B43legacy_PHYTYPE_G: if ((rev >= 5) && (rev <= 10)) filename = "b0g0initvals5"; @@ -1505,6 +1506,7 @@ static int b43legacy_request_firmware(struct b43legacy_wldev *dev) } if (!fw->initvals_band) { switch (dev->phy.type) { + case B43legacy_PHYTYPE_B: case B43legacy_PHYTYPE_G: if ((rev >= 5) && (rev <= 10)) filename = "b0g0bsinitvals5"; From 2d4543fdb487b1301ae48703dea3e66ead2d3c75 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Thu, 10 Apr 2008 13:16:27 -0700 Subject: [PATCH 144/187] MAINTAINERS: move to generic repository for iwlwifi Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 23e1799c512f..eeacfc56b35d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2116,7 +2116,7 @@ M: reinette.chatre@intel.com L: linux-wireless@vger.kernel.org L: ipw3945-devel@lists.sourceforge.net W: http://intellinuxwireless.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/rchatre/iwlwifi-2.6.git +T: git kernel.org:/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git S: Supported IOC3 ETHERNET DRIVER From 4ac58469f13028e1eb97f8bc7b0fca5072591d8d Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 11 Apr 2008 11:59:00 +0200 Subject: [PATCH 145/187] ssb: Fix usage of struct device used for DMAing This fixes DMA on architectures where DMA is nontrivial, like PPC64. We must use the host-device's (PCI) struct device for any DMA operation instead of the SSB device. For this we add a new struct device pointer to the SSB device structure that will always point to the right device for DMAing. Without this patch b43 and b44 drivers won't work on complex-DMA architectures, that for example need dev->archdata for DMA operations. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/b44.c | 52 +++++++++++++++++----------------- drivers/net/wireless/b43/dma.c | 27 +++++++++--------- drivers/ssb/main.c | 14 +++++---- include/linux/ssb/ssb.h | 4 +++ 4 files changed, 52 insertions(+), 45 deletions(-) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 25f1337cd02c..59dce6aa0865 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -148,7 +148,7 @@ static inline void b44_sync_dma_desc_for_device(struct ssb_device *sdev, unsigned long offset, enum dma_data_direction dir) { - dma_sync_single_range_for_device(sdev->dev, dma_base, + dma_sync_single_range_for_device(sdev->dma_dev, dma_base, offset & dma_desc_align_mask, dma_desc_sync_size, dir); } @@ -158,7 +158,7 @@ static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev, unsigned long offset, enum dma_data_direction dir) { - dma_sync_single_range_for_cpu(sdev->dev, dma_base, + dma_sync_single_range_for_cpu(sdev->dma_dev, dma_base, offset & dma_desc_align_mask, dma_desc_sync_size, dir); } @@ -613,7 +613,7 @@ static void b44_tx(struct b44 *bp) BUG_ON(skb == NULL); - dma_unmap_single(bp->sdev->dev, + dma_unmap_single(bp->sdev->dma_dev, rp->mapping, skb->len, DMA_TO_DEVICE); @@ -653,7 +653,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) if (skb == NULL) return -ENOMEM; - mapping = dma_map_single(bp->sdev->dev, skb->data, + mapping = dma_map_single(bp->sdev->dma_dev, skb->data, RX_PKT_BUF_SZ, DMA_FROM_DEVICE); @@ -663,19 +663,19 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { /* Sigh... */ if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dev, mapping, + dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ, DMA_FROM_DEVICE); dev_kfree_skb_any(skb); skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA); if (skb == NULL) return -ENOMEM; - mapping = dma_map_single(bp->sdev->dev, skb->data, + mapping = dma_map_single(bp->sdev->dma_dev, skb->data, RX_PKT_BUF_SZ, DMA_FROM_DEVICE); if (dma_mapping_error(mapping) || mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); + dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); dev_kfree_skb_any(skb); return -ENOMEM; } @@ -750,7 +750,7 @@ static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked) dest_idx * sizeof(dest_desc), DMA_BIDIRECTIONAL); - dma_sync_single_for_device(bp->sdev->dev, le32_to_cpu(src_desc->addr), + dma_sync_single_for_device(bp->sdev->dma_dev, le32_to_cpu(src_desc->addr), RX_PKT_BUF_SZ, DMA_FROM_DEVICE); } @@ -772,7 +772,7 @@ static int b44_rx(struct b44 *bp, int budget) struct rx_header *rh; u16 len; - dma_sync_single_for_cpu(bp->sdev->dev, map, + dma_sync_single_for_cpu(bp->sdev->dma_dev, map, RX_PKT_BUF_SZ, DMA_FROM_DEVICE); rh = (struct rx_header *) skb->data; @@ -806,7 +806,7 @@ static int b44_rx(struct b44 *bp, int budget) skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod); if (skb_size < 0) goto drop_it; - dma_unmap_single(bp->sdev->dev, map, + dma_unmap_single(bp->sdev->dma_dev, map, skb_size, DMA_FROM_DEVICE); /* Leave out rx_header */ skb_put(skb, len + RX_PKT_OFFSET); @@ -966,24 +966,24 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) goto err_out; } - mapping = dma_map_single(bp->sdev->dev, skb->data, len, DMA_TO_DEVICE); + mapping = dma_map_single(bp->sdev->dma_dev, skb->data, len, DMA_TO_DEVICE); if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { struct sk_buff *bounce_skb; /* Chip can't handle DMA to/from >1GB, use bounce buffer */ if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dev, mapping, len, + dma_unmap_single(bp->sdev->dma_dev, mapping, len, DMA_TO_DEVICE); bounce_skb = __dev_alloc_skb(len, GFP_ATOMIC | GFP_DMA); if (!bounce_skb) goto err_out; - mapping = dma_map_single(bp->sdev->dev, bounce_skb->data, + mapping = dma_map_single(bp->sdev->dma_dev, bounce_skb->data, len, DMA_TO_DEVICE); if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { if (!dma_mapping_error(mapping)) - dma_unmap_single(bp->sdev->dev, mapping, + dma_unmap_single(bp->sdev->dma_dev, mapping, len, DMA_TO_DEVICE); dev_kfree_skb_any(bounce_skb); goto err_out; @@ -1082,7 +1082,7 @@ static void b44_free_rings(struct b44 *bp) if (rp->skb == NULL) continue; - dma_unmap_single(bp->sdev->dev, rp->mapping, RX_PKT_BUF_SZ, + dma_unmap_single(bp->sdev->dma_dev, rp->mapping, RX_PKT_BUF_SZ, DMA_FROM_DEVICE); dev_kfree_skb_any(rp->skb); rp->skb = NULL; @@ -1094,7 +1094,7 @@ static void b44_free_rings(struct b44 *bp) if (rp->skb == NULL) continue; - dma_unmap_single(bp->sdev->dev, rp->mapping, rp->skb->len, + dma_unmap_single(bp->sdev->dma_dev, rp->mapping, rp->skb->len, DMA_TO_DEVICE); dev_kfree_skb_any(rp->skb); rp->skb = NULL; @@ -1117,12 +1117,12 @@ static void b44_init_rings(struct b44 *bp) memset(bp->tx_ring, 0, B44_TX_RING_BYTES); if (bp->flags & B44_FLAG_RX_RING_HACK) - dma_sync_single_for_device(bp->sdev->dev, bp->rx_ring_dma, + dma_sync_single_for_device(bp->sdev->dma_dev, bp->rx_ring_dma, DMA_TABLE_BYTES, DMA_BIDIRECTIONAL); if (bp->flags & B44_FLAG_TX_RING_HACK) - dma_sync_single_for_device(bp->sdev->dev, bp->tx_ring_dma, + dma_sync_single_for_device(bp->sdev->dma_dev, bp->tx_ring_dma, DMA_TABLE_BYTES, DMA_TO_DEVICE); @@ -1144,24 +1144,24 @@ static void b44_free_consistent(struct b44 *bp) bp->tx_buffers = NULL; if (bp->rx_ring) { if (bp->flags & B44_FLAG_RX_RING_HACK) { - dma_unmap_single(bp->sdev->dev, bp->rx_ring_dma, + dma_unmap_single(bp->sdev->dma_dev, bp->rx_ring_dma, DMA_TABLE_BYTES, DMA_BIDIRECTIONAL); kfree(bp->rx_ring); } else - dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES, + dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES, bp->rx_ring, bp->rx_ring_dma); bp->rx_ring = NULL; bp->flags &= ~B44_FLAG_RX_RING_HACK; } if (bp->tx_ring) { if (bp->flags & B44_FLAG_TX_RING_HACK) { - dma_unmap_single(bp->sdev->dev, bp->tx_ring_dma, + dma_unmap_single(bp->sdev->dma_dev, bp->tx_ring_dma, DMA_TABLE_BYTES, DMA_TO_DEVICE); kfree(bp->tx_ring); } else - dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES, + dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES, bp->tx_ring, bp->tx_ring_dma); bp->tx_ring = NULL; bp->flags &= ~B44_FLAG_TX_RING_HACK; @@ -1187,7 +1187,7 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) goto out_err; size = DMA_TABLE_BYTES; - bp->rx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->rx_ring_dma, gfp); + bp->rx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size, &bp->rx_ring_dma, gfp); if (!bp->rx_ring) { /* Allocation may have failed due to pci_alloc_consistent insisting on use of GFP_DMA, which is more restrictive @@ -1199,7 +1199,7 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) if (!rx_ring) goto out_err; - rx_ring_dma = dma_map_single(bp->sdev->dev, rx_ring, + rx_ring_dma = dma_map_single(bp->sdev->dma_dev, rx_ring, DMA_TABLE_BYTES, DMA_BIDIRECTIONAL); @@ -1214,7 +1214,7 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) bp->flags |= B44_FLAG_RX_RING_HACK; } - bp->tx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->tx_ring_dma, gfp); + bp->tx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size, &bp->tx_ring_dma, gfp); if (!bp->tx_ring) { /* Allocation may have failed due to dma_alloc_coherent insisting on use of GFP_DMA, which is more restrictive @@ -1226,7 +1226,7 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp) if (!tx_ring) goto out_err; - tx_ring_dma = dma_map_single(bp->sdev->dev, tx_ring, + tx_ring_dma = dma_map_single(bp->sdev->dma_dev, tx_ring, DMA_TABLE_BYTES, DMA_TO_DEVICE); diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 948eb1fe916b..48e912487b16 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -373,10 +373,10 @@ static inline dma_addr_t dmaaddr; if (tx) { - dmaaddr = dma_map_single(ring->dev->dev->dev, + dmaaddr = dma_map_single(ring->dev->dev->dma_dev, buf, len, DMA_TO_DEVICE); } else { - dmaaddr = dma_map_single(ring->dev->dev->dev, + dmaaddr = dma_map_single(ring->dev->dev->dma_dev, buf, len, DMA_FROM_DEVICE); } @@ -388,9 +388,10 @@ static inline dma_addr_t addr, size_t len, int tx) { if (tx) { - dma_unmap_single(ring->dev->dev->dev, addr, len, DMA_TO_DEVICE); + dma_unmap_single(ring->dev->dev->dma_dev, + addr, len, DMA_TO_DEVICE); } else { - dma_unmap_single(ring->dev->dev->dev, + dma_unmap_single(ring->dev->dev->dma_dev, addr, len, DMA_FROM_DEVICE); } } @@ -400,7 +401,7 @@ static inline dma_addr_t addr, size_t len) { B43_WARN_ON(ring->tx); - dma_sync_single_for_cpu(ring->dev->dev->dev, + dma_sync_single_for_cpu(ring->dev->dev->dma_dev, addr, len, DMA_FROM_DEVICE); } @@ -409,7 +410,7 @@ static inline dma_addr_t addr, size_t len) { B43_WARN_ON(ring->tx); - dma_sync_single_for_device(ring->dev->dev->dev, + dma_sync_single_for_device(ring->dev->dev->dma_dev, addr, len, DMA_FROM_DEVICE); } @@ -425,7 +426,7 @@ static inline static int alloc_ringmemory(struct b43_dmaring *ring) { - struct device *dev = ring->dev->dev->dev; + struct device *dma_dev = ring->dev->dev->dma_dev; gfp_t flags = GFP_KERNEL; /* The specs call for 4K buffers for 30- and 32-bit DMA with 4K @@ -439,7 +440,7 @@ static int alloc_ringmemory(struct b43_dmaring *ring) */ if (ring->type == B43_DMA_64BIT) flags |= GFP_DMA; - ring->descbase = dma_alloc_coherent(dev, B43_DMA_RINGMEMSIZE, + ring->descbase = dma_alloc_coherent(dma_dev, B43_DMA_RINGMEMSIZE, &(ring->dmabase), flags); if (!ring->descbase) { b43err(ring->dev->wl, "DMA ringmemory allocation failed\n"); @@ -452,9 +453,9 @@ static int alloc_ringmemory(struct b43_dmaring *ring) static void free_ringmemory(struct b43_dmaring *ring) { - struct device *dev = ring->dev->dev->dev; + struct device *dma_dev = ring->dev->dev->dma_dev; - dma_free_coherent(dev, B43_DMA_RINGMEMSIZE, + dma_free_coherent(dma_dev, B43_DMA_RINGMEMSIZE, ring->descbase, ring->dmabase); } @@ -854,7 +855,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, goto err_kfree_meta; /* test for ability to dma to txhdr_cache */ - dma_test = dma_map_single(dev->dev->dev, + dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache, b43_txhdr_size(dev), DMA_TO_DEVICE); @@ -869,7 +870,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, if (!ring->txhdr_cache) goto err_kfree_meta; - dma_test = dma_map_single(dev->dev->dev, + dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache, b43_txhdr_size(dev), DMA_TO_DEVICE); @@ -883,7 +884,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, } } - dma_unmap_single(dev->dev->dev, + dma_unmap_single(dev->dev->dma_dev, dma_test, b43_txhdr_size(dev), DMA_TO_DEVICE); } diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 72017bf2e577..8003a9e55ac4 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -436,15 +436,18 @@ static int ssb_devices_register(struct ssb_bus *bus) #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; + sdev->dma_dev = &bus->host_pci->dev; #endif break; case SSB_BUSTYPE_PCMCIA: #ifdef CONFIG_SSB_PCMCIAHOST sdev->irq = bus->host_pcmcia->irq.AssignedIRQ; dev->parent = &bus->host_pcmcia->dev; + sdev->dma_dev = &bus->host_pcmcia->dev; #endif break; case SSB_BUSTYPE_SSB: + sdev->dma_dev = dev; break; } @@ -1018,15 +1021,14 @@ EXPORT_SYMBOL(ssb_dma_translation); int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask) { - struct device *dev = ssb_dev->dev; + struct device *dma_dev = ssb_dev->dma_dev; #ifdef CONFIG_SSB_PCIHOST - if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI && - !dma_supported(dev, mask)) - return -EIO; + if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) + return dma_set_mask(dma_dev, mask); #endif - dev->coherent_dma_mask = mask; - dev->dma_mask = &dev->coherent_dma_mask; + dma_dev->coherent_dma_mask = mask; + dma_dev->dma_mask = &dma_dev->coherent_dma_mask; return 0; } diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 20add65215af..db53defde5ee 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -129,6 +129,10 @@ struct ssb_device { const struct ssb_bus_ops *ops; struct device *dev; + /* Pointer to the device that has to be used for + * any DMA related operation. */ + struct device *dma_dev; + struct ssb_bus *bus; struct ssb_device_id id; From cdbbe3d1f53086ece706674d3bf4f6d148083694 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 11 Apr 2008 12:16:36 +0200 Subject: [PATCH 146/187] b43legacy: Fix usage of struct device used for DMAing This fixes b43legacy for the SSB DMA API change. Signed-off-by: Michael Buesch Cc: Stefano Brivio Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/dma.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index e87b427d5e43..59300486f48e 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -393,11 +393,11 @@ dma_addr_t map_descbuffer(struct b43legacy_dmaring *ring, dma_addr_t dmaaddr; if (tx) - dmaaddr = dma_map_single(ring->dev->dev->dev, + dmaaddr = dma_map_single(ring->dev->dev->dma_dev, buf, len, DMA_TO_DEVICE); else - dmaaddr = dma_map_single(ring->dev->dev->dev, + dmaaddr = dma_map_single(ring->dev->dev->dma_dev, buf, len, DMA_FROM_DEVICE); @@ -411,11 +411,11 @@ void unmap_descbuffer(struct b43legacy_dmaring *ring, int tx) { if (tx) - dma_unmap_single(ring->dev->dev->dev, + dma_unmap_single(ring->dev->dev->dma_dev, addr, len, DMA_TO_DEVICE); else - dma_unmap_single(ring->dev->dev->dev, + dma_unmap_single(ring->dev->dev->dma_dev, addr, len, DMA_FROM_DEVICE); } @@ -427,7 +427,7 @@ void sync_descbuffer_for_cpu(struct b43legacy_dmaring *ring, { B43legacy_WARN_ON(ring->tx); - dma_sync_single_for_cpu(ring->dev->dev->dev, + dma_sync_single_for_cpu(ring->dev->dev->dma_dev, addr, len, DMA_FROM_DEVICE); } @@ -438,7 +438,7 @@ void sync_descbuffer_for_device(struct b43legacy_dmaring *ring, { B43legacy_WARN_ON(ring->tx); - dma_sync_single_for_device(ring->dev->dev->dev, + dma_sync_single_for_device(ring->dev->dev->dma_dev, addr, len, DMA_FROM_DEVICE); } @@ -458,9 +458,9 @@ void free_descriptor_buffer(struct b43legacy_dmaring *ring, static int alloc_ringmemory(struct b43legacy_dmaring *ring) { - struct device *dev = ring->dev->dev->dev; + struct device *dma_dev = ring->dev->dev->dma_dev; - ring->descbase = dma_alloc_coherent(dev, B43legacy_DMA_RINGMEMSIZE, + ring->descbase = dma_alloc_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE, &(ring->dmabase), GFP_KERNEL); if (!ring->descbase) { b43legacyerr(ring->dev->wl, "DMA ringmemory allocation" @@ -474,9 +474,9 @@ static int alloc_ringmemory(struct b43legacy_dmaring *ring) static void free_ringmemory(struct b43legacy_dmaring *ring) { - struct device *dev = ring->dev->dev->dev; + struct device *dma_dev = ring->dev->dev->dma_dev; - dma_free_coherent(dev, B43legacy_DMA_RINGMEMSIZE, + dma_free_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE, ring->descbase, ring->dmabase); } @@ -886,7 +886,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, goto err_kfree_meta; /* test for ability to dma to txhdr_cache */ - dma_test = dma_map_single(dev->dev->dev, ring->txhdr_cache, + dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache, sizeof(struct b43legacy_txhdr_fw3), DMA_TO_DEVICE); @@ -900,7 +900,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, if (!ring->txhdr_cache) goto err_kfree_meta; - dma_test = dma_map_single(dev->dev->dev, + dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache, sizeof(struct b43legacy_txhdr_fw3), DMA_TO_DEVICE); @@ -910,7 +910,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, goto err_kfree_txhdr_cache; } - dma_unmap_single(dev->dev->dev, + dma_unmap_single(dev->dev->dma_dev, dma_test, sizeof(struct b43legacy_txhdr_fw3), DMA_TO_DEVICE); } From 89796f64a20d31e74ee0051df2e26812c852e734 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 12 Apr 2008 16:39:47 +0100 Subject: [PATCH 147/187] rfkill: Fix device type check when toggling states rfkill_switch_all() is supposed to only switch all the interfaces of a given type, but does not actually do this; instead, it just switches everything currently in the same state. Add the necessary type check in. (This fixes a bug I've been seeing while developing an rfkill laptop driver, with both bluetooth and wireless simultaneously changing state after only pressing either KEY_WLAN or KEY_BLUETOOTH). Signed-off-by: Carlos Corbacho Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 140a0a8c6b02..4e10a95de832 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -92,7 +92,7 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) rfkill_states[type] = state; list_for_each_entry(rfkill, &rfkill_list, node) { - if (!rfkill->user_claim) + if ((!rfkill->user_claim) && (rfkill->type == type)) rfkill_toggle_radio(rfkill, state); } From e089764596ccde1037f2849fcee002c68986e67c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 12 Apr 2008 19:23:55 +0200 Subject: [PATCH 148/187] Add rfkill to MAINTAINERS file I have been acting as the maintainer since the rfkill introduction, so lets make it official by adding a rfkill entry in the MAINTAINERS file. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index eeacfc56b35d..f5b7d0b47c2d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3342,6 +3342,13 @@ L: reiserfs-devel@vger.kernel.org W: http://www.namesys.com S: Supported +RFKILL +P: Ivo van Doorn +M: IvDoorn@gmail.com +L: netdev@vger.kernel.org +S: Maintained +F: net/rfkill + ROCKETPORT DRIVER P: Comtrol Corp. W: http://www.comtrol.com From 2dd0f69222c481574baf6a4affb9256a7c7410e7 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 12 Apr 2008 19:25:00 +0200 Subject: [PATCH 149/187] Update rt2x00 MAINTAINERS entry Add the tree entry for rt2x00 to inform people about the rt2x00.git tree. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index f5b7d0b47c2d..e46775868019 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3280,6 +3280,7 @@ L: linux-wireless@vger.kernel.org L: rt2400-devel@lists.sourceforge.net W: http://rt2x00.serialmonkey.com/ S: Maintained +T: git kernel.org:/pub/scm/linux/kernel/git/ivd/rt2x00.git F: drivers/net/wireless/rt2x00/ RAMDISK RAM BLOCK DEVICE DRIVER From b3fc9c6c58c986f7a24fd8b0794d1e0794935a28 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 13 Apr 2008 10:12:47 +0200 Subject: [PATCH 150/187] mac80211: remove message on receiving unexpected unencrypted frames Some people are getting this message a lot, and we have traced it to broken access points that much too often send completely empty frames (all bytes zeroed, which they shouldn't do at all.) Since we cannot do anything about such frames in any case except the special case where we're debugging an AP, just remove the message. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/rx.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 535407d07fa4..a8a40aba846b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1050,12 +1050,9 @@ ieee80211_drop_unencrypted(struct ieee80211_txrx_data *rx) if (unlikely(!(rx->fc & IEEE80211_FCTL_PROTECTED) && (rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA && (rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_NULLFUNC && - (rx->key || rx->sdata->drop_unencrypted))) { - if (net_ratelimit()) - printk(KERN_DEBUG "%s: RX non-WEP frame, but expected " - "encryption\n", rx->dev->name); + (rx->key || rx->sdata->drop_unencrypted))) return -EACCES; - } + return 0; } From dc4ae1f46dbbcd08b3b5e23ad5ef87bf4bb41adf Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Mon, 14 Apr 2008 00:59:49 +0200 Subject: [PATCH 151/187] b43legacy: fix DMA mapping leakage This fixes a DMA mapping leakage in the case where we reject a DMA buffer because of its address. The patch by Michael Buesch has been ported to b43legacy. Signed-off-by: Stefano Brivio Cc: Christian Casteyde Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/dma.c | 29 +++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index 59300486f48e..c990f87b107a 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -585,8 +585,9 @@ static int b43legacy_dmacontroller_tx_reset(struct b43legacy_wldev *dev, /* Check if a DMA mapping address is invalid. */ static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring, - dma_addr_t addr, - size_t buffersize) + dma_addr_t addr, + size_t buffersize, + bool dma_to_device) { if (unlikely(dma_mapping_error(addr))) return 1; @@ -594,11 +595,11 @@ static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring, switch (ring->type) { case B43legacy_DMA_30BIT: if ((u64)addr + buffersize > (1ULL << 30)) - return 1; + goto address_error; break; case B43legacy_DMA_32BIT: if ((u64)addr + buffersize > (1ULL << 32)) - return 1; + goto address_error; break; case B43legacy_DMA_64BIT: /* Currently we can't have addresses beyond 64 bits in the kernel. */ @@ -607,6 +608,12 @@ static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring, /* The address is OK. */ return 0; + +address_error: + /* We can't support this address. Unmap it again. */ + unmap_descbuffer(ring, addr, buffersize, dma_to_device); + + return 1; } static int setup_rx_descbuffer(struct b43legacy_dmaring *ring, @@ -626,7 +633,7 @@ static int setup_rx_descbuffer(struct b43legacy_dmaring *ring, return -ENOMEM; dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0); - if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) { + if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { /* ugh. try to realloc in zone_dma */ gfp_flags |= GFP_DMA; @@ -639,7 +646,7 @@ static int setup_rx_descbuffer(struct b43legacy_dmaring *ring, ring->rx_buffersize, 0); } - if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) { + if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { dev_kfree_skb_any(skb); return -EIO; } @@ -891,7 +898,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, DMA_TO_DEVICE); if (b43legacy_dma_mapping_error(ring, dma_test, - sizeof(struct b43legacy_txhdr_fw3))) { + sizeof(struct b43legacy_txhdr_fw3), 1)) { /* ugh realloc */ kfree(ring->txhdr_cache); ring->txhdr_cache = kcalloc(nr_slots, @@ -906,7 +913,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, DMA_TO_DEVICE); if (b43legacy_dma_mapping_error(ring, dma_test, - sizeof(struct b43legacy_txhdr_fw3))) + sizeof(struct b43legacy_txhdr_fw3), 1)) goto err_kfree_txhdr_cache; } @@ -1235,7 +1242,7 @@ static int dma_tx_fragment(struct b43legacy_dmaring *ring, meta_hdr->dmaaddr = map_descbuffer(ring, (unsigned char *)header, sizeof(struct b43legacy_txhdr_fw3), 1); if (b43legacy_dma_mapping_error(ring, meta_hdr->dmaaddr, - sizeof(struct b43legacy_txhdr_fw3))) { + sizeof(struct b43legacy_txhdr_fw3), 1)) { ring->current_slot = old_top_slot; ring->used_slots = old_used_slots; return -EIO; @@ -1254,7 +1261,7 @@ static int dma_tx_fragment(struct b43legacy_dmaring *ring, meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); /* create a bounce buffer in zone_dma on mapping failure. */ - if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len)) { + if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA); if (!bounce_skb) { ring->current_slot = old_top_slot; @@ -1268,7 +1275,7 @@ static int dma_tx_fragment(struct b43legacy_dmaring *ring, skb = bounce_skb; meta->skb = skb; meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); - if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len)) { + if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { ring->current_slot = old_top_slot; ring->used_slots = old_used_slots; err = -EIO; From b358492cd2a9c67bff352c5a60d86e7fc9627477 Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno Date: Mon, 14 Apr 2008 18:07:21 +0900 Subject: [PATCH 152/187] PS3: gelic: fix the oops on the broken IE returned from the hypervisor This fixes the bug that the driver would try to over-scan the memory if the sum of the length field of every IEs does not match the length returned from the hypervisor. Signed-off-by: Masakazu Mokuno Signed-off-by: John W. Linville --- drivers/net/ps3_gelic_wireless.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index ddbc6e475e28..c16de5129a71 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -512,13 +512,18 @@ static void gelic_wl_parse_ie(u8 *data, size_t len, data, len); memset(ie_info, 0, sizeof(struct ie_info)); - while (0 < data_left) { + while (2 <= data_left) { item_id = *pos++; item_len = *pos++; + data_left -= 2; + + if (data_left < item_len) + break; switch (item_id) { case MFIE_TYPE_GENERIC: - if (!memcmp(pos, wpa_oui, OUI_LEN) && + if ((OUI_LEN + 1 <= item_len) && + !memcmp(pos, wpa_oui, OUI_LEN) && pos[OUI_LEN] == 0x01) { ie_info->wpa.data = pos - 2; ie_info->wpa.len = item_len + 2; @@ -535,7 +540,7 @@ static void gelic_wl_parse_ie(u8 *data, size_t len, break; } pos += item_len; - data_left -= item_len + 2; + data_left -= item_len; } pr_debug("%s: wpa=%p,%d wpa2=%p,%d\n", __func__, ie_info->wpa.data, ie_info->wpa.len, From 093a07e2fdfaddab7fc7d4adc76cc569c86603d7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 15 Apr 2008 13:09:54 -0700 Subject: [PATCH 153/187] Fix locking bug in "acquire_console_semaphore_for_printk()" When I cleaned up printk() and split up the printk locking logic in commit 266c2e0abeca649fa6667a1a427ad1da507c6375 ("Make printk() console semaphore accesses sensible") I had incorrectly moved the call to have_callable_console() outside of the console semaphore. That was buggy. The console semaphore protects the console_drivers list that is used by have_callable_console(). Thanks go to Bongani Hlope who saw this as a hang on shutdown and reboot and bisected the bug to the right commit, and tested this patch. See http://lkml.org/lkml/2008/4/11/315 Bisected-and-tested-by: Bongani Hlope Cc: Alexey Dobriyan Signed-off-by: Linus Torvalds --- kernel/printk.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/kernel/printk.c b/kernel/printk.c index c46a20a19a15..bdd4ea8c3f2b 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -643,8 +643,21 @@ static int acquire_console_semaphore_for_printk(unsigned int cpu) { int retval = 0; - if (can_use_console(cpu)) - retval = !try_acquire_console_sem(); + if (!try_acquire_console_sem()) { + retval = 1; + + /* + * If we can't use the console, we need to release + * the console semaphore by hand to avoid flushing + * the buffer. We need to hold the console semaphore + * in order to do this test safely. + */ + if (!can_use_console(cpu)) { + console_locked = 0; + up(&console_sem); + retval = 0; + } + } printk_cpu = UINT_MAX; spin_unlock(&logbuf_lock); return retval; From cf39cc3b56bc4a562db6242d3069f65034ec7549 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 15 Apr 2008 18:36:38 -0400 Subject: [PATCH 154/187] [PARISC] fix signal trampoline cache flushing The signal trampolines were accidently flushing the kernel I$ instead of the users. Fix that up, and also add a missing user D$ flush while we're at it. Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/parisc/kernel/signal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 58fccc96d003..06213d1d6d95 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -534,7 +534,8 @@ insert_restart_trampoline(struct pt_regs *regs) * Flushing one cacheline is cheap. * "sync" on bigger (> 4 way) boxes is not. */ - flush_icache_range(regs->gr[30], regs->gr[30] + 4); + flush_user_dcache_range(regs->gr[30], regs->gr[30] + 4); + flush_user_icache_range(regs->gr[30], regs->gr[30] + 4); regs->gr[31] = regs->gr[30] + 8; /* Preserve original r28. */ From bead9a3abd15710b0bdfd418daef606722d86282 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 16 Apr 2008 01:40:00 +0200 Subject: [PATCH 155/187] mm: sparsemem memory_present() fix Fix memory corruption and crash on 32-bit x86 systems. If a !PAE x86 kernel is booted on a 32-bit system with more than 4GB of RAM, then we call memory_present() with a start/end that goes outside the scope of MAX_PHYSMEM_BITS. That causes this loop to happily walk over the limit of the sparse memory section map: for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) { unsigned long section = pfn_to_section_nr(pfn); struct mem_section *ms; sparse_index_init(section, nid); set_section_nid(section, nid); ms = __nr_to_section(section); if (!ms->section_mem_map) ms->section_mem_map = sparse_encode_early_nid(nid) | SECTION_MARKED_PRESENT; 'ms' will be out of bounds and we'll corrupt a small amount of memory by encoding the node ID and writing SECTION_MARKED_PRESENT (==0x1) over it. The corruption might happen when encoding a non-zero node ID, or due to the SECTION_MARKED_PRESENT which is 0x1: mmzone.h:#define SECTION_MARKED_PRESENT (1UL<<0) The fix is to sanity check anything the architecture passes to sparsemem. This bug seems to be rather old (as old as sparsemem support itself), but the exact incarnation depended on random details like configs, which made this bug more prominent in v2.6.25-to-be. An additional enhancement might be to print a warning about ignored or trimmed memory ranges. Signed-off-by: Ingo Molnar Tested-by: Christoph Lameter Cc: Pekka Enberg Cc: Mel Gorman Cc: Nick Piggin Cc: Andrew Morton Cc: Rafael J. Wysocki Cc: Yinghai Lu Cc: KAMEZAWA Hiroyuki Signed-off-by: Linus Torvalds --- mm/sparse.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/mm/sparse.c b/mm/sparse.c index f6a43c09c322..98d6b39c3472 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -149,8 +149,18 @@ static inline int sparse_early_nid(struct mem_section *section) /* Record a memory area against a node. */ void __init memory_present(int nid, unsigned long start, unsigned long end) { + unsigned long max_arch_pfn = 1UL << (MAX_PHYSMEM_BITS-PAGE_SHIFT); unsigned long pfn; + /* + * Sanity checks - do not allow an architecture to pass + * in larger pfns than the maximum scope of sparsemem: + */ + if (start >= max_arch_pfn) + return; + if (end >= max_arch_pfn) + end = max_arch_pfn; + start &= PAGE_SECTION_MASK; for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) { unsigned long section = pfn_to_section_nr(pfn); From bc65c724d5a2c61539b2c52680941505152fcf30 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 15 Apr 2008 14:34:28 -0700 Subject: [PATCH 156/187] mmc: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable MMC host platform drivers, to re-enable auto loading. Also, add missing owner declarations in driver init. [dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Acked-by: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/at91_mci.c | 1 + drivers/mmc/host/au1xmmc.c | 2 ++ drivers/mmc/host/imxmmc.c | 2 ++ drivers/mmc/host/omap.c | 3 ++- drivers/mmc/host/pxamci.c | 2 ++ drivers/mmc/host/wbsd.c | 1 + 6 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 21acecc9fe3a..a28fc2f68ce2 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -1075,3 +1075,4 @@ module_exit(at91_mci_exit); MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver"); MODULE_AUTHOR("Nick Randell"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at91_mci"); diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index c3926eb3bf43..cc5f7bc546af 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -998,6 +998,7 @@ static struct platform_driver au1xmmc_driver = { .resume = NULL, .driver = { .name = DRIVER_NAME, + .owner = THIS_MODULE, }, }; @@ -1018,5 +1019,6 @@ module_exit(au1xmmc_exit); MODULE_AUTHOR("Advanced Micro Devices, Inc"); MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:au1xxx-mmc"); #endif diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index f2070a19cfa7..95f33e87a99c 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -1128,6 +1128,7 @@ static struct platform_driver imxmci_driver = { .resume = imxmci_resume, .driver = { .name = DRIVER_NAME, + .owner = THIS_MODULE, } }; @@ -1147,3 +1148,4 @@ module_exit(imxmci_exit); MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver"); MODULE_AUTHOR("Sascha Hauer, Pengutronix"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-mmc"); diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index c9dfeb15b487..90c358b57d1c 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1255,6 +1255,7 @@ static struct platform_driver mmc_omap_driver = { .resume = mmc_omap_resume, .driver = { .name = DRIVER_NAME, + .owner = THIS_MODULE, }, }; @@ -1273,5 +1274,5 @@ module_exit(mmc_omap_exit); MODULE_DESCRIPTION("OMAP Multimedia Card driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS(DRIVER_NAME); +MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_AUTHOR("Juha Yrjölä"); diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 1ea8482037bb..65210fca37ed 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -693,6 +693,7 @@ static struct platform_driver pxamci_driver = { .resume = pxamci_resume, .driver = { .name = DRIVER_NAME, + .owner = THIS_MODULE, }, }; @@ -711,3 +712,4 @@ module_exit(pxamci_exit); MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-mci"); diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index 4d5f37421874..be624a049c67 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -1948,6 +1948,7 @@ static struct platform_driver wbsd_driver = { .resume = wbsd_platform_resume, .driver = { .name = DRIVER_NAME, + .owner = THIS_MODULE, }, }; From 2b653e06ce2d70d21483f22ef1b1b63749c54223 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 15 Apr 2008 14:34:29 -0700 Subject: [PATCH 157/187] rtc: fix the error in the function of cmos_set_alarm There is a bug in the function of cmos_set_alarm. RTC alarm time for October can't be set correctly. For October: 0x0A will be written into the RTC region (MONTH_ALARM) in current kernel. But in fact 0x10 should be written. Wildcards are also not handled correctly. Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: David Brownell Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-cmos.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index b48517021ee6..dcdc142a3441 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -198,9 +198,8 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) /* Writing 0xff means "don't care" or "match all". */ - mon = t->time.tm_mon; - mon = (mon < 12) ? BIN2BCD(mon) : 0xff; - mon++; + mon = t->time.tm_mon + 1; + mon = (mon <= 12) ? BIN2BCD(mon) : 0xff; mday = t->time.tm_mday; mday = (mday >= 1 && mday <= 31) ? BIN2BCD(mday) : 0xff; From 3c4ded9715c05724939c9a4bd72555c2ade71d97 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 15 Apr 2008 14:34:30 -0700 Subject: [PATCH 158/187] leds: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable platform LED drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Acked-by: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-ams-delta.c | 2 ++ drivers/leds/leds-atmel-pwm.c | 3 +++ drivers/leds/leds-clevo-mail.c | 1 + drivers/leds/leds-cm-x270.c | 2 ++ drivers/leds/leds-cobalt-qube.c | 3 +++ drivers/leds/leds-corgi.c | 2 ++ drivers/leds/leds-gpio.c | 1 + drivers/leds/leds-h1940.c | 2 ++ drivers/leds/leds-hp6xx.c | 4 ++++ drivers/leds/leds-s3c24xx.c | 1 + drivers/leds/leds-spitz.c | 2 ++ drivers/leds/leds-tosa.c | 2 ++ 12 files changed, 25 insertions(+) diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c index 9e3077463d84..c37bb0d5a0c5 100644 --- a/drivers/leds/leds-ams-delta.c +++ b/drivers/leds/leds-ams-delta.c @@ -140,6 +140,7 @@ static struct platform_driver ams_delta_led_driver = { .resume = ams_delta_led_resume, .driver = { .name = "ams-delta-led", + .owner = THIS_MODULE, }, }; @@ -159,3 +160,4 @@ module_exit(ams_delta_led_exit); MODULE_AUTHOR("Jonathan McDowell "); MODULE_DESCRIPTION("Amstrad Delta LED driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ams-delta-led"); diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c index af61f55571fe..28db6c1444ed 100644 --- a/drivers/leds/leds-atmel-pwm.c +++ b/drivers/leds/leds-atmel-pwm.c @@ -132,6 +132,9 @@ static int __exit pwmled_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:leds-atmel-pwm"); + static struct platform_driver pwmled_driver = { .driver = { .name = "leds-atmel-pwm", diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c index 6c3d33b8e383..5750b08b601f 100644 --- a/drivers/leds/leds-clevo-mail.c +++ b/drivers/leds/leds-clevo-mail.c @@ -170,6 +170,7 @@ static struct platform_driver clevo_mail_led_driver = { .resume = clevo_mail_led_resume, .driver = { .name = KBUILD_MODNAME, + .owner = THIS_MODULE, }, }; diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c index 9aebef02a974..accc7eddb788 100644 --- a/drivers/leds/leds-cm-x270.c +++ b/drivers/leds/leds-cm-x270.c @@ -101,6 +101,7 @@ static struct platform_driver cmx270led_driver = { #endif .driver = { .name = "cm-x270-led", + .owner = THIS_MODULE, }, }; @@ -120,3 +121,4 @@ module_exit(cmx270led_exit); MODULE_AUTHOR("Mike Rapoport "); MODULE_DESCRIPTION("CM-x270 LED driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cm-x270-led"); diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index d2b54b53d80a..096881a11b1a 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -75,6 +75,9 @@ static int __devexit cobalt_qube_led_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:cobalt-qube-leds"); + static struct platform_driver cobalt_qube_led_driver = { .probe = cobalt_qube_led_probe, .remove = __devexit_p(cobalt_qube_led_remove), diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c index e45f6c4b59ba..29e931f89f9c 100644 --- a/drivers/leds/leds-corgi.c +++ b/drivers/leds/leds-corgi.c @@ -99,6 +99,7 @@ static struct platform_driver corgiled_driver = { #endif .driver = { .name = "corgi-led", + .owner = THIS_MODULE, }, }; @@ -118,3 +119,4 @@ module_exit(corgiled_exit); MODULE_AUTHOR("Richard Purdie "); MODULE_DESCRIPTION("Corgi LED driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:corgi-led"); diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 4c0b05852cb6..1aae8b332134 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -199,3 +199,4 @@ module_exit(gpio_led_exit); MODULE_AUTHOR("Raphael Assenat "); MODULE_DESCRIPTION("GPIO LED driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:leds-gpio"); diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c index 677c99325be5..6e51c9b61027 100644 --- a/drivers/leds/leds-h1940.c +++ b/drivers/leds/leds-h1940.c @@ -139,6 +139,7 @@ static int h1940leds_remove(struct platform_device *pdev) static struct platform_driver h1940leds_driver = { .driver = { .name = "h1940-leds", + .owner = THIS_MODULE, }, .probe = h1940leds_probe, .remove = h1940leds_remove, @@ -161,3 +162,4 @@ module_exit(h1940leds_exit); MODULE_AUTHOR("Arnaud Patard "); MODULE_DESCRIPTION("LED driver for the iPAQ H1940"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:h1940-leds"); diff --git a/drivers/leds/leds-hp6xx.c b/drivers/leds/leds-hp6xx.c index 82d4ec384797..870f5a3789e8 100644 --- a/drivers/leds/leds-hp6xx.c +++ b/drivers/leds/leds-hp6xx.c @@ -90,6 +90,9 @@ static int hp6xxled_remove(struct platform_device *pdev) return 0; } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:hp6xx-led"); + static struct platform_driver hp6xxled_driver = { .probe = hp6xxled_probe, .remove = hp6xxled_remove, @@ -99,6 +102,7 @@ static struct platform_driver hp6xxled_driver = { #endif .driver = { .name = "hp6xx-led", + .owner = THIS_MODULE, }, }; diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c index 0fd640751294..0d10e119d8f5 100644 --- a/drivers/leds/leds-s3c24xx.c +++ b/drivers/leds/leds-s3c24xx.c @@ -160,3 +160,4 @@ module_exit(s3c24xx_led_exit); MODULE_AUTHOR("Ben Dooks "); MODULE_DESCRIPTION("S3C24XX LED driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c24xx_led"); diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c index 93e1012b17e6..87007cc362c1 100644 --- a/drivers/leds/leds-spitz.c +++ b/drivers/leds/leds-spitz.c @@ -105,6 +105,7 @@ static struct platform_driver spitzled_driver = { #endif .driver = { .name = "spitz-led", + .owner = THIS_MODULE, }, }; @@ -124,3 +125,4 @@ module_exit(spitzled_exit); MODULE_AUTHOR("Richard Purdie "); MODULE_DESCRIPTION("Spitz LED driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:spitz-led"); diff --git a/drivers/leds/leds-tosa.c b/drivers/leds/leds-tosa.c index 9e0a188fbb0a..7ebecc41a9be 100644 --- a/drivers/leds/leds-tosa.c +++ b/drivers/leds/leds-tosa.c @@ -109,6 +109,7 @@ static struct platform_driver tosaled_driver = { .resume = tosaled_resume, .driver = { .name = "tosa-led", + .owner = THIS_MODULE, }, }; @@ -128,3 +129,4 @@ module_exit(tosaled_exit); MODULE_AUTHOR("Dirk Opfer "); MODULE_DESCRIPTION("Tosa LED driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:tosa-led"); From c43f89c2084f46e3ec59ddcbc52ecf4b1e9b015a Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 15 Apr 2008 14:34:33 -0700 Subject: [PATCH 159/187] fbdev: fix /proc/fb oops after module removal /proc/fb is not removed during rmmod. Steps to reproduce: modprobe fb rmmod fb ls /proc BUG: unable to handle kernel paging request at ffffffffa0094370 IP: [] proc_get_inode+0x101/0x130 PGD 203067 PUD 207063 PMD 17e758067 PTE 0 Oops: 0000 [1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:05:02.0/resource CPU 1 Modules linked in: nf_conntrack_irc xt_state iptable_filter ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables vfat fat usbhid ehci_hcd uhci_hcd usbcore sr_mod cdrom [last unloaded: fb] Pid: 21205, comm: ls Not tainted 2.6.25-rc8-mm2 #14 RIP: 0010:[] [] proc_get_inode+0x101/0x130 RSP: 0018:ffff81017c4bfc78 EFLAGS: 00010246 RAX: 0000000000008000 RBX: ffff8101787f5470 RCX: 0000000048011ccc RDX: ffffffffa0094320 RSI: ffff810006ad43b0 RDI: ffff81017fc2cc00 RBP: ffff81017e450300 R08: 0000000000000002 R09: ffff81017c5d1000 R10: 0000000000000000 R11: 0000000000000246 R12: ffff81016b903a28 R13: ffff81017f822020 R14: ffff81017c4bfd58 R15: ffff81017f822020 FS: 00007f08e71696f0(0000) GS:ffff81017fc06480(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffffa0094370 CR3: 000000017e54a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ls (pid: 21205, threadinfo ffff81017c4be000, task ffff81017de48770) Stack: ffff81017c5d1000 00000000ffffffea ffff81017e450300 ffffffff802bdd1e ffff81017f802258 ffff81017c4bfe48 ffff81016b903a28 ffff81017f822020 ffff81017c4bfd48 ffffffff802b9ba0 ffff81016b903a28 ffff81017f802258 Call Trace: [] ? proc_lookup_de+0x8e/0x100 [] ? proc_root_lookup+0x20/0x60 [] ? do_lookup+0x1b7/0x210 [] ? __link_path_walk+0x53d/0x7f0 [] ? mntput_no_expire+0x28/0x130 [] ? path_walk+0x5a/0xc0 [] ? do_path_lookup+0x83/0x1c0 [] ? getname+0xe5/0x210 [] ? __user_walk_fd+0x4b/0x80 [] ? vfs_lstat_fd+0x2c/0x70 [] ? filldir+0xae/0xf0 [] ? de_put+0x9/0x50 [] ? mnt_want_write+0x2d/0x80 [] ? touch_atime+0x1f/0x170 [] ? proc_root_readdir+0x7d/0xa0 [] ? sys_newlstat+0x27/0x50 [] ? vfs_readdir+0x9b/0xd0 [] ? sys_getdents+0xce/0xe0 [] ? system_call_after_swapgs+0x7b/0x80 Code: b7 83 b2 00 00 00 25 00 f0 00 00 3d 00 80 00 00 74 19 48 89 93 f0 00 00 00 48 89 df e8 39 9a fd ff 48 89 d8 48 83 c4 08 5b 5d c3 <48> 83 7a 50 00 48 c7 c0 60 16 45 80 48 c7 c2 40 17 45 80 48 0f RIP [] proc_get_inode+0x101/0x130 RSP CR2: ffffffffa0094370 ---[ end trace c71hiarjan8ab739 ]--- Signed-off-by: Alexey Dobriyan "Antonino A. Daplas" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/fbmem.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 1194f5e060ea..01072f4b3e8f 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1521,6 +1521,7 @@ module_init(fbmem_init); static void __exit fbmem_exit(void) { + remove_proc_entry("fb", NULL); class_destroy(fb_class); unregister_chrdev(FB_MAJOR, "fb"); } From d6c238503ee3d015c5f8a701b2bfbeaad90a6d4b Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 15 Apr 2008 14:34:33 -0700 Subject: [PATCH 160/187] misc: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable 'misc' platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: bugfix, registration fixes] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/atmel-ssc.c | 2 ++ drivers/misc/atmel_pwm.c | 1 + drivers/misc/hdpuftrs/hdpu_cpustate.c | 2 ++ drivers/misc/hdpuftrs/hdpu_nexus.c | 2 ++ 4 files changed, 7 insertions(+) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index 058ccac700d0..e171650766ce 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -154,6 +154,7 @@ static struct platform_driver ssc_driver = { .remove = __devexit_p(ssc_remove), .driver = { .name = "ssc", + .owner = THIS_MODULE, }, }; @@ -172,3 +173,4 @@ module_exit(ssc_exit); MODULE_AUTHOR("Hans-Christian Egtvedt "); MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ssc"); diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c index f8d3b9a76cbd..0d5ce03cdff2 100644 --- a/drivers/misc/atmel_pwm.c +++ b/drivers/misc/atmel_pwm.c @@ -407,3 +407,4 @@ module_exit(pwm_exit); MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_pwm"); diff --git a/drivers/misc/hdpuftrs/hdpu_cpustate.c b/drivers/misc/hdpuftrs/hdpu_cpustate.c index aa8ce7abe922..302e92418bbe 100644 --- a/drivers/misc/hdpuftrs/hdpu_cpustate.c +++ b/drivers/misc/hdpuftrs/hdpu_cpustate.c @@ -164,6 +164,7 @@ static struct platform_driver hdpu_cpustate_driver = { .remove = hdpu_cpustate_remove, .driver = { .name = HDPU_CPUSTATE_NAME, + .owner = THIS_MODULE, }, }; @@ -248,3 +249,4 @@ module_exit(cpustate_exit); MODULE_AUTHOR("Brian Waite"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" HDPU_CPUSTATE_NAME); diff --git a/drivers/misc/hdpuftrs/hdpu_nexus.c b/drivers/misc/hdpuftrs/hdpu_nexus.c index 2887b2147980..2fa36f7a6eb3 100644 --- a/drivers/misc/hdpuftrs/hdpu_nexus.c +++ b/drivers/misc/hdpuftrs/hdpu_nexus.c @@ -55,6 +55,7 @@ static struct platform_driver hdpu_nexus_driver = { .remove = hdpu_nexus_remove, .driver = { .name = HDPU_NEXUS_NAME, + .owner = THIS_MODULE, }, }; @@ -151,3 +152,4 @@ module_exit(nexus_exit); MODULE_AUTHOR("Brian Waite"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" HDPU_NEXUS_NAME); From 12c2c019eb9b0b586a061b336766d11cca449499 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 15 Apr 2008 14:34:34 -0700 Subject: [PATCH 161/187] pcmcia: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable PCMCIA platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: registration fixes] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pcmcia/at91_cf.c | 1 + drivers/pcmcia/omap_cf.c | 2 ++ drivers/pcmcia/pxa2xx_base.c | 2 ++ 3 files changed, 5 insertions(+) diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c index 385e145e1acc..684968558c19 100644 --- a/drivers/pcmcia/at91_cf.c +++ b/drivers/pcmcia/at91_cf.c @@ -419,3 +419,4 @@ module_exit(at91_cf_exit); MODULE_DESCRIPTION("AT91 Compact Flash Driver"); MODULE_AUTHOR("David Brownell"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at91_cf"); diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index 2df216b00817..bb6db3a582b2 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -344,6 +344,7 @@ static int omap_cf_resume(struct platform_device *pdev) static struct platform_driver omap_cf_driver = { .driver = { .name = (char *) driver_name, + .owner = THIS_MODULE, }, .remove = __exit_p(omap_cf_remove), .suspend = omap_cf_suspend, @@ -368,3 +369,4 @@ module_exit(omap_cf_exit); MODULE_DESCRIPTION("OMAP CF Driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap_cf"); diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index e439044d88f2..9414163c78e7 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -239,6 +239,7 @@ static struct platform_driver pxa2xx_pcmcia_driver = { .resume = pxa2xx_drv_pcmcia_resume, .driver = { .name = "pxa2xx-pcmcia", + .owner = THIS_MODULE, }, }; @@ -258,3 +259,4 @@ module_exit(pxa2xx_pcmcia_exit); MODULE_AUTHOR("Stefan Eletzhofer and Ian Molton "); MODULE_DESCRIPTION("Linux PCMCIA Card Services: PXA2xx core socket driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); From e169c139642fb4c682ec12a409725508dbefa520 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 15 Apr 2008 14:34:35 -0700 Subject: [PATCH 162/187] serial: fix platform driver hotplug/coldplug Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable serial platform drivers, to re-enable auto loading. NOTE that Kconfig for some of these drivers doesn't allow modular builds, and thus doesn't match the driver source's unload support. Presumably their unload code is buggy and/or weakly tested... [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers Signed-off-by: David Brownell Acked-by: Peter Korsgaard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/atmel_serial.c | 1 + drivers/serial/bfin_5xx.c | 2 ++ drivers/serial/imx.c | 2 ++ drivers/serial/mcf.c | 1 + drivers/serial/mpc52xx_uart.c | 2 ++ drivers/serial/mpsc.c | 2 ++ drivers/serial/netx-serial.c | 2 ++ drivers/serial/pnx8xxx_uart.c | 1 + drivers/serial/pxa.c | 3 ++- drivers/serial/s3c2410.c | 4 ++++ drivers/serial/sa1100.c | 2 ++ drivers/serial/sc26xx.c | 2 ++ drivers/serial/sh-sci.c | 1 + drivers/serial/uartlite.c | 3 +++ drivers/serial/vr41xx_siu.c | 3 +++ 15 files changed, 30 insertions(+), 1 deletion(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 430997e33fc4..55492fa095a2 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1577,3 +1577,4 @@ module_exit(atmel_serial_exit); MODULE_AUTHOR("Rick Bronson"); MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_usart"); diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 0aa345b9a38b..46bb47f37b9a 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -1243,6 +1243,7 @@ static struct platform_driver bfin_serial_driver = { .resume = bfin_serial_resume, .driver = { .name = "bfin-uart", + .owner = THIS_MODULE, }, }; @@ -1301,3 +1302,4 @@ MODULE_AUTHOR("Aubrey.Li "); MODULE_DESCRIPTION("Blackfin generic serial port driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); +MODULE_ALIAS("platform:bfin-uart"); diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 56af1f566a4c..16ba9ac7a566 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1090,6 +1090,7 @@ static struct platform_driver serial_imx_driver = { .resume = serial_imx_resume, .driver = { .name = "imx-uart", + .owner = THIS_MODULE, }, }; @@ -1124,3 +1125,4 @@ module_exit(imx_serial_exit); MODULE_AUTHOR("Sascha Hauer"); MODULE_DESCRIPTION("IMX generic serial port driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-uart"); diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index e76fc72c9b36..7e164e0cd211 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -649,5 +649,6 @@ module_exit(mcf_exit); MODULE_AUTHOR("Greg Ungerer "); MODULE_DESCRIPTION("Freescale ColdFire UART driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mcfuart"); /****************************************************************************/ diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index a638f23c6c61..d93b3578c5e2 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -1188,6 +1188,8 @@ mpc52xx_uart_resume(struct platform_device *dev) } #endif +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:mpc52xx-psc"); static struct platform_driver mpc52xx_uart_platform_driver = { .probe = mpc52xx_uart_probe, diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c index cb3a91967742..e8819c43f57d 100644 --- a/drivers/serial/mpsc.c +++ b/drivers/serial/mpsc.c @@ -1964,6 +1964,7 @@ static struct platform_driver mpsc_driver = { .remove = mpsc_drv_remove, .driver = { .name = MPSC_CTLR_NAME, + .owner = THIS_MODULE, }, }; @@ -2007,3 +2008,4 @@ MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $"); MODULE_VERSION(MPSC_VERSION); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR); +MODULE_ALIAS("platform:" MPSC_CTLR_NAME); diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c index b56f7db45031..3123ffeac8ad 100644 --- a/drivers/serial/netx-serial.c +++ b/drivers/serial/netx-serial.c @@ -713,6 +713,7 @@ static struct platform_driver serial_netx_driver = { .driver = { .name = DRIVER_NAME, + .owner = THIS_MODULE, }, }; @@ -745,3 +746,4 @@ module_exit(netx_serial_exit); MODULE_AUTHOR("Sascha Hauer"); MODULE_DESCRIPTION("NetX serial port driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c index 8d01c59e8d04..d0e5a79ea635 100644 --- a/drivers/serial/pnx8xxx_uart.c +++ b/drivers/serial/pnx8xxx_uart.c @@ -850,3 +850,4 @@ MODULE_AUTHOR("Embedded Alley Solutions, Inc."); MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR); +MODULE_ALIAS("platform:pnx8xxx-uart"); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 352fcb8926a6..b4f7ffb7688d 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -833,6 +833,7 @@ static struct platform_driver serial_pxa_driver = { .resume = serial_pxa_resume, .driver = { .name = "pxa2xx-uart", + .owner = THIS_MODULE, }, }; @@ -861,4 +862,4 @@ module_init(serial_pxa_init); module_exit(serial_pxa_exit); MODULE_LICENSE("GPL"); - +MODULE_ALIAS("platform:pxa2xx-uart"); diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 45de19366030..4ffa2585429a 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -1935,3 +1935,7 @@ console_initcall(s3c24xx_serial_initconsole); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks "); MODULE_DESCRIPTION("Samsung S3C2410/S3C2440/S3C2412 Serial port driver"); +MODULE_ALIAS("platform:s3c2400-uart"); +MODULE_ALIAS("platform:s3c2410-uart"); +MODULE_ALIAS("platform:s3c2412-uart"); +MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 58a83c27e14b..67b2338913c2 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -884,6 +884,7 @@ static struct platform_driver sa11x0_serial_driver = { .resume = sa1100_serial_resume, .driver = { .name = "sa11x0-uart", + .owner = THIS_MODULE, }, }; @@ -917,3 +918,4 @@ MODULE_AUTHOR("Deep Blue Solutions Ltd"); MODULE_DESCRIPTION("SA1100 generic serial port driver $Revision: 1.50 $"); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR); +MODULE_ALIAS("platform:sa11x0-uart"); diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c index a350b6d2a181..ae2a9e2df777 100644 --- a/drivers/serial/sc26xx.c +++ b/drivers/serial/sc26xx.c @@ -732,6 +732,7 @@ static struct platform_driver sc26xx_driver = { .remove = __devexit_p(sc26xx_driver_remove), .driver = { .name = "SC26xx", + .owner = THIS_MODULE, }, }; @@ -753,3 +754,4 @@ MODULE_AUTHOR("Thomas Bogendörfer"); MODULE_DESCRIPTION("SC681/SC2692 serial driver"); MODULE_VERSION("1.0"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:SC26xx"); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 9d244d1644e1..eff593080d4f 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1552,3 +1552,4 @@ module_init(sci_init); module_exit(sci_exit); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sh-sci"); diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index 4e06ab6bcb6e..b565d5a37499 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -561,6 +561,9 @@ static int __devexit ulite_remove(struct platform_device *pdev) return ulite_release(&pdev->dev); } +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:uartlite"); + static struct platform_driver ulite_platform_driver = { .probe = ulite_probe, .remove = __devexit_p(ulite_remove), diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index 6fd51b0022ca..98ab649c1ff9 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -960,3 +960,6 @@ static void __exit vr41xx_siu_exit(void) module_init(vr41xx_siu_init); module_exit(vr41xx_siu_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:SIU"); From e115f2d89253490fb2dbf304b627f8d908df26f1 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 15 Apr 2008 14:34:37 -0700 Subject: [PATCH 163/187] memcg: fix oops in oom handling When I used a test program to fork mass processes and immediately move them to a cgroup where the memory limit is low enough to trigger oom kill, I got oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000808 IP: [] _spin_lock_irqsave+0x8/0x18 PGD 4c95f067 PUD 4406c067 PMD 0 Oops: 0002 [1] SMP CPU 2 Modules linked in: Pid: 11973, comm: a.out Not tainted 2.6.25-rc7 #5 RIP: 0010:[] [] _spin_lock_irqsave+0x8/0x18 RSP: 0018:ffff8100448c7c30 EFLAGS: 00010002 RAX: 0000000000000202 RBX: 0000000000000009 RCX: 000000000001c9f3 RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000808 RBP: ffff81007e444080 R08: 0000000000000000 R09: ffff8100448c7900 R10: ffff81000105f480 R11: 00000100ffffffff R12: ffff810067c84140 R13: 0000000000000001 R14: ffff8100441d0018 R15: ffff81007da56200 FS: 00007f70eb1856f0(0000) GS:ffff81007fbad3c0(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000808 CR3: 000000004498a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process a.out (pid: 11973, threadinfo ffff8100448c6000, task ffff81007da533e0) Stack: ffffffff8023ef5a 00000000000000d0 ffffffff80548dc0 00000000000000d0 ffff810067c84140 ffff81007e444080 ffffffff8026cef9 00000000000000d0 ffff8100441d0000 00000000000000d0 ffff8100441d0000 ffff8100505445c0 Call Trace: [] ? force_sig_info+0x25/0xb9 [] ? oom_kill_task+0x77/0xe2 [] ? mem_cgroup_out_of_memory+0x55/0x67 [] ? mem_cgroup_charge_common+0xec/0x202 [] ? handle_mm_fault+0x24e/0x77f [] ? default_wake_function+0x0/0xe [] ? get_user_pages+0x2ce/0x3af [] ? mem_cgroup_charge_common+0x2d/0x202 [] ? make_pages_present+0x8e/0xa4 [] ? mmap_region+0x373/0x429 [] ? do_mmap_pgoff+0x2ff/0x364 [] ? sys_mmap+0xe5/0x111 [] ? tracesys+0xdc/0xe1 Code: 00 00 01 48 8b 3c 24 e9 46 d4 dd ff f0 ff 07 48 8b 3c 24 e9 3a d4 dd ff fe 07 48 8b 3c 24 e9 2f d4 dd ff 9c 58 fa ba 00 01 00 00 66 0f c1 17 38 f2 74 06 f3 90 8a 17 eb f6 c3 fa b8 00 01 00 RIP [] _spin_lock_irqsave+0x8/0x18 RSP CR2: 0000000000000808 ---[ end trace c3702fa668021ea4 ]--- It's reproducable in a x86_64 box, but doesn't happen in x86_32. This is because tsk->sighand is not guarded by RCU, so we have to hold tasklist_lock, just as what out_of_memory() does. Signed-off-by: Li Zefan Cc: KAMEZAWA Hiroyuki Acked-by: Balbir Singh Cc: Pavel Emelianov Cc: Paul Menage Cc: Oleg Nesterov Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/oom_kill.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/oom_kill.c b/mm/oom_kill.c index f255eda693b0..beb592fe9389 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -423,7 +423,7 @@ void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask) struct task_struct *p; cgroup_lock(); - rcu_read_lock(); + read_lock(&tasklist_lock); retry: p = select_bad_process(&points, mem); if (PTR_ERR(p) == -1UL) @@ -436,7 +436,7 @@ retry: "Memory cgroup out of memory")) goto retry; out: - rcu_read_unlock(); + read_unlock(&tasklist_lock); cgroup_unlock(); } #endif From 1f4deba80a0d9fa92832684e683335b742a530e8 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 15 Apr 2008 14:34:38 -0700 Subject: [PATCH 164/187] uml: compile error fix This patch fixes this error: In file included from /home/wangcong/projects/linux-2.6/arch/um/kernel/smp.c:9: include2/asm/tlb.h: In function `tlb_remove_page': include2/asm/tlb.h:101: error: implicit declaration of function `page_cache_release' And since including in will break sparc, we add this #include in uml's own header. Acked-by: Jeff Dike Signed-off-by: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-um/tlb.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-um/tlb.h b/include/asm-um/tlb.h index 39fc475df6c9..5240fa1c5e08 100644 --- a/include/asm-um/tlb.h +++ b/include/asm-um/tlb.h @@ -1,6 +1,7 @@ #ifndef __UM_TLB_H #define __UM_TLB_H +#include #include #include #include From b82d4043b3550df00a036f6aa2c8ab9578a283ef Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Tue, 15 Apr 2008 14:34:40 -0700 Subject: [PATCH 165/187] Fix typos in Documentation/filesystems/seq_file.txt A couple of typos crept into the newly added document about the seq_file interface. This patch corrects those typos and simultaneously deletes unnecessary trailing spaces. Signed-off-by: Dmitri Vorobiev Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/seq_file.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt index cc6cdb95b73a..7fb8e6dc62bf 100644 --- a/Documentation/filesystems/seq_file.txt +++ b/Documentation/filesystems/seq_file.txt @@ -92,7 +92,7 @@ implementations; in most cases the start() function should check for a "past end of file" condition and return NULL if need be. For more complicated applications, the private field of the seq_file -structure can be used. There is also a special value whch can be returned +structure can be used. There is also a special value which can be returned by the start() function called SEQ_START_TOKEN; it can be used if you wish to instruct your show() function (described below) to print a header at the top of the output. SEQ_START_TOKEN should only be used if the offset is @@ -146,7 +146,7 @@ the four functions we have just defined: This structure will be needed to tie our iterator to the /proc file in a little bit. -It's worth noting that the interator value returned by start() and +It's worth noting that the iterator value returned by start() and manipulated by the other functions is considered to be completely opaque by the seq_file code. It can thus be anything that is useful in stepping through the data to be output. Counters can be useful, but it could also be @@ -262,7 +262,7 @@ routines useful: These helpers will interpret pos as a position within the list and iterate accordingly. Your start() and next() functions need only invoke the -seq_list_* helpers with a pointer to the appropriate list_head structure. +seq_list_* helpers with a pointer to the appropriate list_head structure. The extra-simple version From 91446b064c748fc2a238fd68b677c9671e536bfd Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 15 Apr 2008 14:34:42 -0700 Subject: [PATCH 166/187] add "Isolate" migratetype name to /proc/pagetypeinfo In a5d76b54a3f3a40385d7f76069a2feac9f1bad63 (memory unplug: page isolation by KAMEZAWA Hiroyuki), "isolate" migratetype added. but unfortunately, it doesn't treat /proc/pagetypeinfo display logic. this patch add "Isolate" to pagetype name field. /proc/pagetype before: ------------------------------------------------------------------------------------------------------------------------ Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 Node 0, zone DMA, type Unmovable 1 2 2 2 1 2 2 1 1 0 0 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type Movable 2 3 3 1 3 3 2 0 0 0 0 Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone DMA, type 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Unmovable 1 9 7 4 1 1 1 1 0 0 0 Node 0, zone Normal, type Reclaimable 5 2 0 0 1 1 0 0 0 1 0 Node 0, zone Normal, type Movable 0 1 1 0 0 0 1 0 0 1 60 Node 0, zone Normal, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone Normal, type 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Unmovable 0 0 1 1 1 0 1 1 2 2 0 Node 0, zone HighMem, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Movable 236 62 6 2 2 1 1 0 1 1 16 Node 0, zone HighMem, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone HighMem, type 0 0 0 0 0 0 0 0 0 0 0 Number of blocks type Unmovable Reclaimable Movable Reserve Node 0, zone DMA 1 0 2 1 0 Node 0, zone Normal 10 40 169 1 0 Node 0, zone HighMem 2 0 283 1 0 after: ------------------------------------------------------------------------------------------------------------------------ Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 Node 0, zone DMA, type Unmovable 1 2 2 2 1 2 2 1 1 0 0 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type Movable 2 3 3 1 3 3 2 0 0 0 0 Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Unmovable 0 2 1 1 0 1 0 0 0 0 0 Node 0, zone Normal, type Reclaimable 1 1 1 1 1 0 1 1 1 0 0 Node 0, zone Normal, type Movable 0 1 1 1 0 1 0 1 0 0 196 Node 0, zone Normal, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Unmovable 0 1 0 0 0 1 1 1 2 2 0 Node 0, zone HighMem, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Movable 1 0 1 1 0 0 0 0 1 0 200 Node 0, zone HighMem, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone HighMem, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Number of blocks type Unmovable Reclaimable Movable Reserve Isolate Node 0, zone DMA 1 0 2 1 0 Node 0, zone Normal 8 4 207 1 0 Node 0, zone HighMem 2 0 283 1 0 Signed-off-by: KOSAKI Motohiro Acked-by: KAMEZAWA Hiroyuki Acked-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmstat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/vmstat.c b/mm/vmstat.c index 422d960ffcd8..7c7286e9506d 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -388,6 +388,7 @@ static char * const migratetype_names[MIGRATE_TYPES] = { "Reclaimable", "Movable", "Reserve", + "Isolate", }; static void *frag_start(struct seq_file *m, loff_t *pos) From 423bec43079a2942a3004034df7aad76469758d8 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Tue, 15 Apr 2008 14:34:43 -0700 Subject: [PATCH 167/187] Documentation: correct overcommit caveat in hugetlbpage.txt As shown by Gurudas Pai recently, we can put hugepages into the surplus state (by echo 0 > /proc/sys/vm/nr_hugepages), even when /proc/sys/vm/nr_overcommit_hugepages is 0. This is actually correct, to allow the original goal (shrink the static pool to 0) to succeed (we are converting hugepages to surplus because they are in use). However, the documentation does not accurately reflect this case. Update it. Signed-off-by: Nishanth Aravamudan Acked-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/hugetlbpage.txt | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index f962d01bea2a..3102b81bef88 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -88,10 +88,9 @@ hugepages from the buddy allocator, if the normal pool is exhausted. As these surplus hugepages go out of use, they are freed back to the buddy allocator. -Caveat: Shrinking the pool via nr_hugepages while a surplus is in effect -will allow the number of surplus huge pages to exceed the overcommit -value, as the pool hugepages (which must have been in use for a surplus -hugepages to be allocated) will become surplus hugepages. As long as +Caveat: Shrinking the pool via nr_hugepages such that it becomes less +than the number of hugepages in use will convert the balance to surplus +huge pages even if it would exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. From 335e92e8a515420bd47a6b0f01cb9a206c0ed6e4 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 15 Apr 2008 14:34:43 -0700 Subject: [PATCH 168/187] vfs: fix possible deadlock in ext2, ext3, ext4 when using xattrs mb_cache_entry_alloc() was allocating cache entries with GFP_KERNEL. But filesystems are calling this function while holding xattr_sem so possible recursion into the fs violates locking ordering of xattr_sem and transaction start / i_mutex for ext2-4. Change mb_cache_entry_alloc() so that filesystems can specify desired gfp mask and use GFP_NOFS from all of them. Signed-off-by: Jan Kara Reported-by: Dave Jones Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext2/xattr.c | 2 +- fs/ext3/xattr.c | 2 +- fs/ext4/xattr.c | 2 +- fs/mbcache.c | 4 ++-- include/linux/mbcache.h | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c index 3e8683dbb13f..a99d46f3b26e 100644 --- a/fs/ext2/xattr.c +++ b/fs/ext2/xattr.c @@ -835,7 +835,7 @@ ext2_xattr_cache_insert(struct buffer_head *bh) struct mb_cache_entry *ce; int error; - ce = mb_cache_entry_alloc(ext2_xattr_cache); + ce = mb_cache_entry_alloc(ext2_xattr_cache, GFP_NOFS); if (!ce) return -ENOMEM; error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, &hash); diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c index a6ea4d6a8bb2..42856541e9a5 100644 --- a/fs/ext3/xattr.c +++ b/fs/ext3/xattr.c @@ -1126,7 +1126,7 @@ ext3_xattr_cache_insert(struct buffer_head *bh) struct mb_cache_entry *ce; int error; - ce = mb_cache_entry_alloc(ext3_xattr_cache); + ce = mb_cache_entry_alloc(ext3_xattr_cache, GFP_NOFS); if (!ce) { ea_bdebug(bh, "out of memory"); return; diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index d7962139c010..e9054c1c7d93 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1386,7 +1386,7 @@ ext4_xattr_cache_insert(struct buffer_head *bh) struct mb_cache_entry *ce; int error; - ce = mb_cache_entry_alloc(ext4_xattr_cache); + ce = mb_cache_entry_alloc(ext4_xattr_cache, GFP_NOFS); if (!ce) { ea_bdebug(bh, "out of memory"); return; diff --git a/fs/mbcache.c b/fs/mbcache.c index eb31b73e7d69..ec88ff3d04a9 100644 --- a/fs/mbcache.c +++ b/fs/mbcache.c @@ -399,11 +399,11 @@ mb_cache_destroy(struct mb_cache *cache) * if no more memory was available. */ struct mb_cache_entry * -mb_cache_entry_alloc(struct mb_cache *cache) +mb_cache_entry_alloc(struct mb_cache *cache, gfp_t gfp_flags) { struct mb_cache_entry *ce; - ce = kmem_cache_alloc(cache->c_entry_cache, GFP_KERNEL); + ce = kmem_cache_alloc(cache->c_entry_cache, gfp_flags); if (ce) { atomic_inc(&cache->c_entry_count); INIT_LIST_HEAD(&ce->e_lru_list); diff --git a/include/linux/mbcache.h b/include/linux/mbcache.h index 99e044b4efc6..a09b84e4fdb4 100644 --- a/include/linux/mbcache.h +++ b/include/linux/mbcache.h @@ -34,7 +34,7 @@ void mb_cache_destroy(struct mb_cache *); /* Functions on cache entries */ -struct mb_cache_entry *mb_cache_entry_alloc(struct mb_cache *); +struct mb_cache_entry *mb_cache_entry_alloc(struct mb_cache *, gfp_t); int mb_cache_entry_insert(struct mb_cache_entry *, struct block_device *, sector_t, unsigned int[]); void mb_cache_entry_release(struct mb_cache_entry *); From 4bb5eba06b4bc57e30b0f6336c9907e85c395197 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 15 Apr 2008 14:34:44 -0700 Subject: [PATCH 169/187] spi: spi_s3c24xx driver must init completion The s3c24xx_spi_txrx() function should initialise the completion each time before using it, otherwise we end up with the possibility of returning success before the interrupt handler has processed all the data. Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index e75103aac790..6f2c79da984d 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -192,8 +192,11 @@ static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t) hw->len = t->len; hw->count = 0; + init_completion(&hw->done); + /* send the first byte */ writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT); + wait_for_completion(&hw->done); return hw->count; From 50f426b55d919dd017af35bb6a08753d1f262920 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 15 Apr 2008 14:34:45 -0700 Subject: [PATCH 170/187] spi: spi_s3c24xx must initialize bus_num Pass the bus number we expect the S3C24XX SPI driver to attach to via the platform data. Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 6f2c79da984d..80719ef54365 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -238,6 +238,7 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev) static int __init s3c24xx_spi_probe(struct platform_device *pdev) { + struct s3c2410_spi_info *pdata; struct s3c24xx_spi *hw; struct spi_master *master; struct resource *res; @@ -254,10 +255,10 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) memset(hw, 0, sizeof(struct s3c24xx_spi)); hw->master = spi_master_get(master); - hw->pdata = pdev->dev.platform_data; + hw->pdata = pdata = pdev->dev.platform_data; hw->dev = &pdev->dev; - if (hw->pdata == NULL) { + if (pdata == NULL) { dev_err(&pdev->dev, "No platform data supplied\n"); err = -ENOENT; goto err_no_pdata; @@ -333,13 +334,13 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) /* setup any gpio we can */ - if (!hw->pdata->set_cs) { + if (!pdata->set_cs) { hw->set_cs = s3c24xx_spi_gpiocs; - s3c2410_gpio_setpin(hw->pdata->pin_cs, 1); - s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT); + s3c2410_gpio_setpin(pdata->pin_cs, 1); + s3c2410_gpio_cfgpin(pdata->pin_cs, S3C2410_GPIO_OUTPUT); } else - hw->set_cs = hw->pdata->set_cs; + hw->set_cs = pdata->set_cs; /* register our spi controller */ From d1e7780638a9192f15caf590e0081bf915fdef71 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 15 Apr 2008 14:34:46 -0700 Subject: [PATCH 171/187] spi: spi_s3c24xx must initialize num_chipselect The SPI core now expects num_chipselect to be set correctly as due to added checks on the chip being selected before an transfer is allowed. This patch adds a num_cs field to the platform data which needs to be set correctly before adding the SPI platform device. Signed-off-by: Ben Dooks Signed-off-by: David Brownell Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 4 ++++ include/asm-arm/arch-s3c2410/spi.h | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 80719ef54365..b7476b888197 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -267,6 +267,10 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, hw); init_completion(&hw->done); + /* setup the master state. */ + + master->num_chipselect = hw->pdata->num_cs; + /* setup the state for the bitbang driver */ hw->bitbang.master = hw->master; diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h index 7ca0ed97a6d0..352d33860b63 100644 --- a/include/asm-arm/arch-s3c2410/spi.h +++ b/include/asm-arm/arch-s3c2410/spi.h @@ -15,6 +15,7 @@ struct s3c2410_spi_info { unsigned long pin_cs; /* simple gpio cs */ + unsigned int num_cs; /* total chipselects */ void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; From f0a37e008750ead1751b7d5e89d220a260a46147 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Tue, 15 Apr 2008 14:34:47 -0700 Subject: [PATCH 172/187] acpi: bus: check once more for an empty list after locking it List could have become empty after the unlocked check that was made earlier, so check again inside the lock. Should fix https://bugzilla.redhat.com/show_bug.cgi?id=427765 Signed-off-by: Chuck Ebbert Cc: Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/bus.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 5b6760e0f957..2d1955c11833 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -373,10 +373,11 @@ int acpi_bus_receive_event(struct acpi_bus_event *event) } spin_lock_irqsave(&acpi_bus_event_lock, flags); - entry = - list_entry(acpi_bus_event_list.next, struct acpi_bus_event, node); - if (entry) + if (!list_empty(&acpi_bus_event_list)) { + entry = list_entry(acpi_bus_event_list.next, + struct acpi_bus_event, node); list_del(&entry->node); + } spin_unlock_irqrestore(&acpi_bus_event_lock, flags); if (!entry) From 5f1a3f2ac4ddf966cd0555dc445c6df65709c580 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Tue, 15 Apr 2008 14:34:47 -0700 Subject: [PATCH 173/187] acpi thermal trip points increased to 12 The THERMAL_MAX_TRIPS value is set to 10. It is too few for the Compaq AP550 machine which has 12 trip points. Signed-off-by: Krzysztof Helt Cc: Len Brown Cc: Zhang Rui Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/thermal/thermal.c | 4 ++++ include/linux/thermal.h | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c index 8b86e53ccf7a..7f79bbf652d7 100644 --- a/drivers/thermal/thermal.c +++ b/drivers/thermal/thermal.c @@ -196,6 +196,10 @@ static struct device_attribute trip_point_attrs[] = { __ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL), __ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL), __ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_10_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_10_temp, 0444, trip_point_temp_show, NULL), + __ATTR(trip_point_11_type, 0444, trip_point_type_show, NULL), + __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL), }; #define TRIP_POINT_ATTR_ADD(_dev, _index, result) \ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 818ca1cf0b6d..90c1c191ea69 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -50,7 +50,7 @@ struct thermal_cooling_device_ops { }; #define THERMAL_TRIPS_NONE -1 -#define THERMAL_MAX_TRIPS 10 +#define THERMAL_MAX_TRIPS 12 #define THERMAL_NAME_LENGTH 20 struct thermal_cooling_device { int id; From b87e81e5c6e64ae0eae3b4f61bf07bfeec856184 Mon Sep 17 00:00:00 2001 From: "yakui.zhao@intel.com" Date: Tue, 15 Apr 2008 14:34:49 -0700 Subject: [PATCH 174/187] acpi: unneccessary to scan the PCI bus already scanned http://bugzilla.kernel.org/show_bug.cgi?id=10124 this change: commit 08f1c192c3c32797068bfe97738babb3295bbf42 Author: Muli Ben-Yehuda Date: Sun Jul 22 00:23:39 2007 +0300 x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata This patch introduces struct pci_sysdata to x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it. This lays the groundwork for having other users of sysdata, such as the PCI domains work. The Calgary bits are tested, the NUMA bits just look ok. replaces pcibios_scan_root by pci_scan_bus_parented... but in pcibios_scan_root we have a check about scanned busses. Cc: Cc: Stian Jordet Cc: Len Brown Cc: Greg KH Cc: Ingo Molnar Cc: "Yinghai Lu" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/pci/pci.c | 7 ++++++- arch/x86/pci/acpi.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 3 deletions(-) diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index e282c348dcde..53d0a8ee35d7 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -362,7 +362,12 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) info.name = name; acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window, &info); - + /* + * See arch/x86/pci/acpi.c. + * The desired pci bus might already be scanned in a quirk. We + * should handle the case here, but it appears that IA64 hasn't + * such quirk. So we just ignore the case now. + */ pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller); if (pbus) pcibios_setup_root_windows(pbus, controller); diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 0234f2831bf3..378136fb5044 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -219,8 +219,21 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (pxm >= 0) sd->node = pxm_to_node(pxm); #endif + /* + * Maybe the desired pci bus has been already scanned. In such case + * it is unnecessary to scan the pci bus with the given domain,busnum. + */ + bus = pci_find_bus(domain, busnum); + if (bus) { + /* + * If the desired bus exits, the content of bus->sysdata will + * be replaced by sd. + */ + memcpy(bus->sysdata, sd, sizeof(*sd)); + kfree(sd); + } else + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); - bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); if (!bus) kfree(sd); @@ -228,7 +241,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (bus != NULL) { if (pxm >= 0) { printk("bus %d -> pxm %d -> node %d\n", - busnum, pxm, sd->node); + busnum, pxm, pxm_to_node(pxm)); } } #endif From 56f367bbfd5a7439961499ca6a2f0822d2074d83 Mon Sep 17 00:00:00 2001 From: Vitaliy Gusev Date: Tue, 15 Apr 2008 20:26:34 -0700 Subject: [PATCH 175/187] [TCP]: Add return value indication to tcp_prune_ofo_queue(). Returns non-zero if tp->out_of_order_queue was seen non-empty. This allows tcp_try_rmem_schedule() to return early. Signed-off-by: Vitaliy Gusev Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 61db7b1eb995..bbb7d88a16b4 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3841,7 +3841,7 @@ static void tcp_ofo_queue(struct sock *sk) } } -static void tcp_prune_ofo_queue(struct sock *sk); +static int tcp_prune_ofo_queue(struct sock *sk); static int tcp_prune_queue(struct sock *sk); static inline int tcp_try_rmem_schedule(struct sock *sk, unsigned int size) @@ -3853,7 +3853,9 @@ static inline int tcp_try_rmem_schedule(struct sock *sk, unsigned int size) return -1; if (!sk_rmem_schedule(sk, size)) { - tcp_prune_ofo_queue(sk); + if (!tcp_prune_ofo_queue(sk)) + return -1; + if (!sk_rmem_schedule(sk, size)) return -1; } @@ -4211,10 +4213,12 @@ static void tcp_collapse_ofo_queue(struct sock *sk) /* * Purge the out-of-order queue. + * Return true if queue was pruned. */ -static void tcp_prune_ofo_queue(struct sock *sk) +static int tcp_prune_ofo_queue(struct sock *sk) { struct tcp_sock *tp = tcp_sk(sk); + int res = 0; if (!skb_queue_empty(&tp->out_of_order_queue)) { NET_INC_STATS_BH(LINUX_MIB_OFOPRUNED); @@ -4228,7 +4232,9 @@ static void tcp_prune_ofo_queue(struct sock *sk) if (tp->rx_opt.sack_ok) tcp_sack_reset(&tp->rx_opt); sk_mem_reclaim(sk); + res = 1; } + return res; } /* Reduce allocated memory if we can, trying to get From 80d9709832390fa7e721bbf4a017da474fdc6c29 Mon Sep 17 00:00:00 2001 From: James Cameron Date: Wed, 9 Apr 2008 18:59:13 +1000 Subject: [PATCH 176/187] USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driver The modem was detected, the ttyUSB{0,1,2} appeared, a call could be made, and the expected data rate was achieved. Tested for an hour or two, total of 100Mb. I shall do more testing. Signed-off-by: James Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a396fbbdc9c2..eb695b2e6d24 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -165,6 +165,8 @@ static int option_send_setup(struct usb_serial_port *port); #define QUALCOMM_VENDOR_ID 0x05C6 +#define MAXON_VENDOR_ID 0x16d8 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -249,6 +251,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ + { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); From a1d9bc12e06a71b01f626040dc5149b357e8f1eb Mon Sep 17 00:00:00 2001 From: Matthias Urlichs Date: Thu, 10 Apr 2008 10:13:32 +0200 Subject: [PATCH 177/187] USB: option.c: add more device IDs Add devices by AMOI and NovatelWireless. Signed-Off-By: Matthias Urlichs Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index eb695b2e6d24..01b6c681ff2d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -129,6 +129,7 @@ static int option_send_setup(struct usb_serial_port *port); #define NOVATELWIRELESS_PRODUCT_EV620 0x2100 #define NOVATELWIRELESS_PRODUCT_ES720 0x2110 #define NOVATELWIRELESS_PRODUCT_E725 0x2120 +#define NOVATELWIRELESS_PRODUCT_ES620 0x2130 #define NOVATELWIRELESS_PRODUCT_EU730 0x2400 #define NOVATELWIRELESS_PRODUCT_EU740 0x2410 #define NOVATELWIRELESS_PRODUCT_EU870D 0x2420 @@ -137,6 +138,8 @@ static int option_send_setup(struct usb_serial_port *port); #define NOVATELWIRELESS_PRODUCT_MC727 0x4100 #define NOVATELWIRELESS_PRODUCT_MC950D 0x4400 +#define NOVATELWIRELESS_PRODUCT_U727 0x5010 + /* FUTURE NOVATEL PRODUCTS */ #define NOVATELWIRELESS_PRODUCT_EVDO_1 0x6000 #define NOVATELWIRELESS_PRODUCT_HSPA_1 0x7000 @@ -163,6 +166,9 @@ static int option_send_setup(struct usb_serial_port *port); #define BANDRICH_PRODUCT_C100_1 0x1002 #define BANDRICH_PRODUCT_C100_2 0x1003 +#define AMOI_VENDOR_ID 0x1614 +#define AMOI_PRODUCT_9508 0x0800 + #define QUALCOMM_VENDOR_ID 0x05C6 #define MAXON_VENDOR_ID 0x16d8 @@ -206,6 +212,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */ @@ -218,13 +225,13 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) }, /* Novatel EV620/ES620 CDMA/EV-DO */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) }, /* Novatel ES620/ES720/U720/USB720 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) }, /* Novatel E725/E726 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES620) }, /* Novatel Merlin ES620 SM Bus */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) }, /* Novatel EU730 and Vodafone EU740 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) }, /* Novatel non-Vodafone EU740 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x5010) }, /* Novatel U727 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel U727 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */ From aad8a278f37e748bfe310a1366f2aa7e0dbaf365 Mon Sep 17 00:00:00 2001 From: fangxiaozhi Date: Thu, 10 Apr 2008 14:51:06 +0800 Subject: [PATCH 178/187] USB: support more Huawei data card product IDs - declare the unusal device for Huawei data card devices in unusual_devs.h - disable the product ID matching for Huawei data card devices in usb_match_device function of driver.c - declare the product IDs in option.c. Signed-off-by: fangxiaozhi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 32 ++++++++++ drivers/usb/storage/unusual_devs.h | 96 ++++++++++++++++++++++++++++-- 2 files changed, 124 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 01b6c681ff2d..d5306ea55b3e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -109,6 +109,22 @@ static int option_send_setup(struct usb_serial_port *port); #define HUAWEI_PRODUCT_E600 0x1001 #define HUAWEI_PRODUCT_E220 0x1003 #define HUAWEI_PRODUCT_E220BIS 0x1004 +#define HUAWEI_PRODUCT_E1401 0x1401 +#define HUAWEI_PRODUCT_E1403 0x1403 +#define HUAWEI_PRODUCT_E1405 0x1405 +#define HUAWEI_PRODUCT_E1406 0x1406 +#define HUAWEI_PRODUCT_E1408 0x1408 +#define HUAWEI_PRODUCT_E1409 0x1409 +#define HUAWEI_PRODUCT_E1410 0x1410 +#define HUAWEI_PRODUCT_E1411 0x1411 +#define HUAWEI_PRODUCT_E1412 0x1412 +#define HUAWEI_PRODUCT_E1413 0x1413 +#define HUAWEI_PRODUCT_E1414 0x1414 +#define HUAWEI_PRODUCT_E1415 0x1415 +#define HUAWEI_PRODUCT_E1416 0x1416 +#define HUAWEI_PRODUCT_E1417 0x1417 +#define HUAWEI_PRODUCT_E1418 0x1418 +#define HUAWEI_PRODUCT_E1419 0x1419 #define NOVATELWIRELESS_VENDOR_ID 0x1410 @@ -212,6 +228,22 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418) }, + { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index e5219a56947c..91252075e6e1 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1530,16 +1530,104 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by fangxiaozhi - * and by linlei - * Patch reworked by Johann Wilhelm - * This brings the HUAWEI E220 devices into multi-port mode +/* Reported by fangxiaozhi + * This brings the HUAWEI data card devices into multi-port mode */ +UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), +UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), /* Reported by Vilius Bilinkevicius Date: Mon, 14 Apr 2008 10:06:35 +0800 Subject: [PATCH 179/187] USB: option: Add new vendor ID and device ID for AMOI HSDPA modem This patch add new vendor ID and device ID for AMOI HSDPA modem. From: tang kai Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d5306ea55b3e..d101025a4c63 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -166,6 +166,12 @@ static int option_send_setup(struct usb_serial_port *port); #define NOVATELWIRELESS_PRODUCT_EMBEDDED_2 0x8001 #define NOVATELWIRELESS_PRODUCT_GLOBAL_2 0x9001 +/* AMOI PRODUCTS */ +#define AMOI_VENDOR_ID 0x1614 +#define AMOI_PRODUCT_H01 0x0800 +#define AMOI_PRODUCT_H01A 0x7002 +#define AMOI_PRODUCT_H02 0x0802 + #define DELL_VENDOR_ID 0x413C #define KYOCERA_VENDOR_ID 0x0c88 @@ -273,6 +279,10 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */ + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) }, + { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ From 07c3b1a1001614442c665570942a3107a722c314 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 14 Apr 2008 14:17:29 -0700 Subject: [PATCH 180/187] USB: remove broken usb-serial num_endpoints check The num_interrupt_in, num_bulk_in, and other checks in the usb-serial code are just wrong, there are too many different devices out there with different numbers of endpoints. We need to just be sticking with the device ids instead of trying to catch this kind of thing. It broke too many different devices. This fixes a large number of usb-serial devices to get them working properly again. Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 3ce98e8d7bce..2138ba8aeb69 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -854,6 +854,7 @@ int usb_serial_probe(struct usb_interface *interface, serial->num_interrupt_in = num_interrupt_in; serial->num_interrupt_out = num_interrupt_out; +#if 0 /* check that the device meets the driver's requirements */ if ((type->num_interrupt_in != NUM_DONT_CARE && type->num_interrupt_in != num_interrupt_in) @@ -867,6 +868,7 @@ int usb_serial_probe(struct usb_interface *interface, kfree(serial); return -EIO; } +#endif /* found all that we need */ dev_info(&interface->dev, "%s converter detected\n", From 424b00e2c0f0c38f2cf5331391742ec998f6d89f Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 16 Apr 2008 11:08:22 +0100 Subject: [PATCH 181/187] AFS: Do not describe debug parameters with their value Describe debug parameters with their names (and not their values). Signed-off-by: Paul Bolle Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/afs/main.c | 2 +- net/rxrpc/af_rxrpc.c | 2 +- net/rxrpc/rxkad.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/afs/main.c b/fs/afs/main.c index 0f60f6b35769..2d3e5d4fb9f7 100644 --- a/fs/afs/main.c +++ b/fs/afs/main.c @@ -22,7 +22,7 @@ MODULE_LICENSE("GPL"); unsigned afs_debug; module_param_named(debug, afs_debug, uint, S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(afs_debug, "AFS debugging mask"); +MODULE_PARM_DESC(debug, "AFS debugging mask"); static char *rootcell; diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c index 2d0c29c837f7..4b2682feeedc 100644 --- a/net/rxrpc/af_rxrpc.c +++ b/net/rxrpc/af_rxrpc.c @@ -27,7 +27,7 @@ MODULE_ALIAS_NETPROTO(PF_RXRPC); unsigned rxrpc_debug; // = RXRPC_DEBUG_KPROTO; module_param_named(debug, rxrpc_debug, uint, S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(rxrpc_debug, "RxRPC debugging mask"); +MODULE_PARM_DESC(debug, "RxRPC debugging mask"); static int sysctl_rxrpc_max_qlen __read_mostly = 10; diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c index d1c296f2d617..6d38a81b336d 100644 --- a/net/rxrpc/rxkad.c +++ b/net/rxrpc/rxkad.c @@ -31,7 +31,7 @@ unsigned rxrpc_debug; module_param_named(debug, rxrpc_debug, uint, S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(rxrpc_debug, "rxkad debugging mask"); +MODULE_PARM_DESC(debug, "rxkad debugging mask"); struct rxkad_level1_hdr { __be32 data_size; /* true data size (excluding padding) */ From 71fc4c0c441eab97630bf2b310e81ebff5e831d7 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 17 Apr 2008 01:14:32 +0200 Subject: [PATCH 182/187] avr32 mustn't select HAVE_IDE There's a libata based PATA driver for avr32, but no support for drivers/ide/ on avr32. This patch fixes the following compile error: <-- snip --> ... CC [M] drivers/ide/ide-cd.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/ide-cd.c:37: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/ide.h:209:21: error: asm/ide.h: No such file or directory make[3]: *** [drivers/ide/ide-cd.o] Error 1 <-- snip --> Signed-off-by: Adrian Bunk Cc: Haavard Skinnemoen Acked-by: Sam Ravnborg Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/avr32/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index c75d7089f982..28e0caf4156c 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -10,7 +10,6 @@ config AVR32 # With EMBEDDED=n, we get lots of stuff automatically selected # that we usually don't need on AVR32. select EMBEDDED - select HAVE_IDE select HAVE_OPROFILE select HAVE_KPROBES help From 09a77441f27f51f5f9878c90c7ed67e303197a2a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 17 Apr 2008 01:14:33 +0200 Subject: [PATCH 183/187] Au1200: kill IDE driver function prototypes Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c: include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared `static' but never defined include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared `static' but never defined by wiping out the whole "function prototyping" section from the header file as it mostly declared functions that are already dead in the IDE driver; move the only useful prototype into the driver. Signed-off-by: Sergei Shtylyov Cc: Ralf Baechle Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/au1xxx-ide.c | 2 ++ include/asm-mips/mach-au1x00/au1xxx_ide.h | 18 ------------------ 2 files changed, 2 insertions(+), 18 deletions(-) diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 0f4bf5d72835..da91060c320f 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -56,6 +56,8 @@ static _auide_hwif auide_hwif; static int dbdma_init_done; +static int auide_ddma_init(_auide_hwif *auide); + #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) void auide_insw(unsigned long port, void *addr, u32 count) diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index e4fe26c160ba..89655c0cdcd6 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -122,24 +122,6 @@ static const struct drive_list_entry dma_black_list [] = { }; #endif -/* function prototyping */ -u8 auide_inb(unsigned long port); -u16 auide_inw(unsigned long port); -u32 auide_inl(unsigned long port); -void auide_insw(unsigned long port, void *addr, u32 count); -void auide_insl(unsigned long port, void *addr, u32 count); -void auide_outb(u8 addr, unsigned long port); -void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port); -void auide_outw(u16 addr, unsigned long port); -void auide_outl(u32 addr, unsigned long port); -void auide_outsw(unsigned long port, void *addr, u32 count); -void auide_outsl(unsigned long port, void *addr, u32 count); -static void auide_tune_drive(ide_drive_t *drive, byte pio); -static int auide_tune_chipset(ide_drive_t *drive, u8 speed); -static int auide_ddma_init( _auide_hwif *auide ); -static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif); -int __init auide_probe(void); - /******************************************************************************* * PIO Mode timing calculation : * * * From fabd3a223a96de1a91b2148655f2ed09ca9d1c20 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 17 Apr 2008 01:14:33 +0200 Subject: [PATCH 184/187] Au1200: IDE driver build fix The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled: drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable': drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function `sg_virt' drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function `sg_next' drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from integer without a cast Fix this by including . While at it, remove the #include's without which the driver happily builds. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/au1xxx-ide.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index da91060c320f..f84411b6609a 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -32,19 +32,12 @@ #include #include #include - #include #include -#include +#include -#include - -#include "ide-timing.h" - -#include #include #include - #include #define DRV_NAME "au1200-ide" From b4dcaea36b0376456c97698deba0089d2d67cbe7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 17 Apr 2008 01:14:33 +0200 Subject: [PATCH 185/187] Pb1200/DBAu1200: fix bad IDE resource size The header files for the Pb1200/DBAu1200 boards have wrong definition for the IDE interface's decoded range length -- it should be 512 bytes according to what the IDE driver does. In addition, the IDE platform device claims 1 byte too many for its memory resource -- fix the platform code and the IDE driver in accordance. Signed-off-by: Sergei Shtylyov Cc: Ralf Baechle Signed-off-by: Bartlomiej Zolnierkiewicz --- arch/mips/au1000/common/platform.c | 2 +- drivers/ide/mips/au1xxx-ide.c | 7 ++++--- include/asm-mips/mach-db1x00/db1200.h | 4 ++-- include/asm-mips/mach-pb1x00/pb1200.h | 4 ++-- 4 files changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 841904cdef4d..39d681265297 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -189,7 +189,7 @@ static struct resource au1200_lcd_resources[] = { static struct resource au1200_ide0_resources[] = { [0] = { .start = AU1XXX_ATA_PHYS_ADDR, - .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN, + .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index f84411b6609a..85c016bdfd38 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -586,13 +586,14 @@ static int au_ide_probe(struct device *dev) goto out; } - if (!request_mem_region (res->start, res->end-res->start, pdev->name)) { + if (!request_mem_region(res->start, res->end - res->start + 1, + pdev->name)) { pr_debug("%s: request_mem_region failed\n", DRV_NAME); ret = -EBUSY; goto out; } - ahwif->regbase = (u32)ioremap(res->start, res->end-res->start); + ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1); if (ahwif->regbase == 0) { ret = -ENOMEM; goto out; @@ -677,7 +678,7 @@ static int au_ide_remove(struct device *dev) iounmap((void *)ahwif->regbase); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start); + release_mem_region(res->start, res->end - res->start + 1); return 0; } diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h index a6bdac61ab49..d2e28e64932e 100644 --- a/include/asm-mips/mach-db1x00/db1200.h +++ b/include/asm-mips/mach-db1x00/db1200.h @@ -173,8 +173,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define AU1XXX_SMC91111_IRQ DB1200_ETH_INT #define AU1XXX_ATA_PHYS_ADDR (0x18800000) -#define AU1XXX_ATA_PHYS_LEN (0x100) -#define AU1XXX_ATA_REG_OFFSET (5) +#define AU1XXX_ATA_REG_OFFSET (5) +#define AU1XXX_ATA_PHYS_LEN (16 << AU1XXX_ATA_REG_OFFSET) #define AU1XXX_ATA_INT DB1200_IDE_INT #define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1; #define AU1XXX_ATA_RQSIZE 128 diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h index 72213e3d02c7..edaa489b58f1 100644 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -186,8 +186,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define AU1XXX_SMC91111_IRQ PB1200_ETH_INT #define AU1XXX_ATA_PHYS_ADDR (0x0C800000) -#define AU1XXX_ATA_PHYS_LEN (0x100) -#define AU1XXX_ATA_REG_OFFSET (5) +#define AU1XXX_ATA_REG_OFFSET (5) +#define AU1XXX_ATA_PHYS_LEN (16 << AU1XXX_ATA_REG_OFFSET) #define AU1XXX_ATA_INT PB1200_IDE_INT #define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1; #define AU1XXX_ATA_RQSIZE 128 From da19566552315389370c40e690054a31b7623de5 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Thu, 17 Apr 2008 01:14:33 +0200 Subject: [PATCH 186/187] it821x: do not describe noraid parameter with its value Describe noraid parameter with its name (and not its value). Signed-off-by: Paul Bolle Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/it821x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 1597f0cc1bf1..d8a167451fd6 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -667,7 +667,7 @@ static int __init it821x_ide_init(void) module_init(it821x_ide_init); module_param_named(noraid, it8212_noraid, int, S_IRUGO); -MODULE_PARM_DESC(it8212_noraid, "Force card into bypass mode"); +MODULE_PARM_DESC(noraid, "Force card into bypass mode"); MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("PCI driver module for the ITE 821x"); From 4b119e21d0c66c22e8ca03df05d9de623d0eb50f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 16 Apr 2008 19:49:44 -0700 Subject: [PATCH 187/187] Linux 2.6.25 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 21c76f715bf5..39516bfad958 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 25 -EXTRAVERSION = -rc9 +EXTRAVERSION = NAME = Funky Weasel is Jiggy wit it # *DOCUMENTATION*