powerpc/pci: Always print PHB and PE numbers as hexadecimal

PHB, PE (and by association MVE) numbers are printed as a mix of decimal
and hexadecimal throughout the kernel.  This can be misleading, so make
them all hexadecimal.

Standardising on hex instead of dec because:

 - PHB numbers are presented in hex in sysfs/debugfs (and lspci, etc)
 - PE numbers are presented as hex in sysfs and parsed in hex in debugfs

The only place I think this could cause confusing are the messages during
boot, i.e.

	pci 000a:01     : [PE# 000] Secondary bus 1 associated with PE#0

which can be a quick way to check PE numbers.  pe_level_printk() will
only print two characters instead of three, so the above would be

	pci 000a:01     : [PE# 00] Secondary bus 1 associated with PE#0

which gives a hint it's in hex.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This commit is contained in:
Russell Currey 2016-11-16 14:02:15 +11:00 committed by Michael Ellerman
parent d4791db527
commit 1f52f17614
9 changed files with 40 additions and 40 deletions

View File

@ -372,7 +372,7 @@ static int eeh_phb_check_failure(struct eeh_pe *pe)
/* Find the PHB PE */
phb_pe = eeh_phb_pe_get(pe->phb);
if (!phb_pe) {
pr_warn("%s Can't find PE for PHB#%d\n",
pr_warn("%s Can't find PE for PHB#%x\n",
__func__, pe->phb->global_number);
return -EEXIST;
}
@ -664,7 +664,7 @@ int eeh_pci_enable(struct eeh_pe *pe, int function)
rc = eeh_ops->set_option(pe, function);
if (rc)
pr_warn("%s: Unexpected state change %d on "
"PHB#%d-PE#%x, err=%d\n",
"PHB#%x-PE#%x, err=%d\n",
__func__, function, pe->phb->global_number,
pe->addr, rc);
@ -864,7 +864,7 @@ int eeh_reset_pe(struct eeh_pe *pe)
}
if (state < 0) {
pr_warn("%s: Unrecoverable slot failure on PHB#%d-PE#%x",
pr_warn("%s: Unrecoverable slot failure on PHB#%x-PE#%x",
__func__, pe->phb->global_number, pe->addr);
ret = -ENOTRECOVERABLE;
goto out;

View File

@ -732,7 +732,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
frozen_bus = eeh_pe_bus_get(pe);
if (!frozen_bus) {
pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n",
__func__, pe->phb->global_number, pe->addr);
return;
}
@ -876,7 +876,7 @@ excess_failures:
* are due to poorly seated PCI cards. Only 10% or so are
* due to actual, failed cards.
*/
pr_err("EEH: PHB#%d-PE#%x has failed %d times in the\n"
pr_err("EEH: PHB#%x-PE#%x has failed %d times in the\n"
"last hour and has been permanently disabled.\n"
"Please try reseating or replacing it.\n",
pe->phb->global_number, pe->addr,
@ -884,7 +884,7 @@ excess_failures:
goto perm_error;
hard_fail:
pr_err("EEH: Unable to recover from failure from PHB#%d-PE#%x.\n"
pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n"
"Please try reseating or replacing it\n",
pe->phb->global_number, pe->addr);
@ -998,7 +998,7 @@ static void eeh_handle_special_event(void)
bus = eeh_pe_bus_get(phb_pe);
if (!bus) {
pr_err("%s: Cannot find PCI bus for "
"PHB#%d-PE#%x\n",
"PHB#%x-PE#%x\n",
__func__,
pe->phb->global_number,
pe->addr);

View File

@ -75,11 +75,11 @@ static int eeh_event_handler(void * dummy)
if (pe) {
eeh_pe_state_mark(pe, EEH_PE_RECOVERING);
if (pe->type & EEH_PE_PHB)
pr_info("EEH: Detected error on PHB#%d\n",
pr_info("EEH: Detected error on PHB#%x\n",
pe->phb->global_number);
else
pr_info("EEH: Detected PCI bus error on "
"PHB#%d-PE#%x\n",
"PHB#%x-PE#%x\n",
pe->phb->global_number, pe->addr);
eeh_handle_event(pe);
eeh_pe_state_clear(pe, EEH_PE_RECOVERING);

View File

@ -104,7 +104,7 @@ int eeh_phb_pe_create(struct pci_controller *phb)
/* Put it into the list */
list_add_tail(&pe->child, &eeh_phb_pe);
pr_debug("EEH: Add PE for PHB#%d\n", phb->global_number);
pr_debug("EEH: Add PE for PHB#%x\n", phb->global_number);
return 0;
}
@ -333,7 +333,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
/* Check if the PE number is valid */
if (!eeh_has_flag(EEH_VALID_PE_ZERO) && !edev->pe_config_addr) {
pr_err("%s: Invalid PE#0 for edev 0x%x on PHB#%d\n",
pr_err("%s: Invalid PE#0 for edev 0x%x on PHB#%x\n",
__func__, edev->config_addr, edev->phb->global_number);
return -EINVAL;
}

View File

@ -393,7 +393,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
/* Create PE */
ret = eeh_add_to_parent_pe(edev);
if (ret) {
pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%d)\n",
pr_warn("%s: Can't add PCI dev %04x:%02x:%02x.%01x to parent PE (%x)\n",
__func__, hose->global_number, pdn->busno,
PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn), ret);
return NULL;
@ -1097,7 +1097,7 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
bus = eeh_pe_bus_get(pe);
if (!bus) {
pr_err("%s: Cannot find PCI bus for PHB#%d-PE#%x\n",
pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n",
__func__, pe->phb->global_number, pe->addr);
return -EIO;
}

View File

@ -263,7 +263,7 @@ static int pnv_npu_dma_set_bypass(struct pnv_ioda_pe *npe)
/* Enable the bypass window */
top = roundup_pow_of_two(top);
dev_info(&npe->pdev->dev, "Enabling bypass for PE %d\n",
dev_info(&npe->pdev->dev, "Enabling bypass for PE %x\n",
npe->pe_number);
rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
npe->pe_number, npe->pe_number,

View File

@ -83,7 +83,7 @@ void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
PCI_SLOT(pe->rid), PCI_FUNC(pe->rid));
#endif /* CONFIG_PCI_IOV*/
printk("%spci %s: [PE# %.3d] %pV",
printk("%spci %s: [PE# %.2x] %pV",
level, pfix, pe->pe_number, &vaf);
va_end(args);
@ -146,7 +146,7 @@ static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
if (rc != OPAL_SUCCESS && rc != OPAL_UNSUPPORTED)
pr_warn("%s: Error %lld unfreezing PHB#%d-PE#%d\n",
pr_warn("%s: Error %lld unfreezing PHB#%x-PE#%x\n",
__func__, rc, phb->hose->global_number, pe_no);
return &phb->ioda.pe_array[pe_no];
@ -155,13 +155,13 @@ static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
static void pnv_ioda_reserve_pe(struct pnv_phb *phb, int pe_no)
{
if (!(pe_no >= 0 && pe_no < phb->ioda.total_pe_num)) {
pr_warn("%s: Invalid PE %d on PHB#%x\n",
pr_warn("%s: Invalid PE %x on PHB#%x\n",
__func__, pe_no, phb->hose->global_number);
return;
}
if (test_and_set_bit(pe_no, phb->ioda.pe_alloc))
pr_debug("%s: PE %d was reserved on PHB#%x\n",
pr_debug("%s: PE %x was reserved on PHB#%x\n",
__func__, pe_no, phb->hose->global_number);
pnv_ioda_init_pe(phb, pe_no);
@ -229,7 +229,7 @@ static int pnv_ioda2_init_m64(struct pnv_phb *phb)
else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
r->end -= (2 * phb->ioda.m64_segsize);
else
pr_warn(" Cannot strip M64 segment for reserved PE#%d\n",
pr_warn(" Cannot strip M64 segment for reserved PE#%x\n",
phb->ioda.reserved_pe_idx);
return 0;
@ -291,7 +291,7 @@ static int pnv_ioda1_init_m64(struct pnv_phb *phb)
OPAL_M64_WINDOW_TYPE, index, base, 0,
PNV_IODA1_M64_SEGS * segsz);
if (rc != OPAL_SUCCESS) {
pr_warn(" Error %lld setting M64 PHB#%d-BAR#%d\n",
pr_warn(" Error %lld setting M64 PHB#%x-BAR#%d\n",
rc, phb->hose->global_number, index);
goto fail;
}
@ -300,7 +300,7 @@ static int pnv_ioda1_init_m64(struct pnv_phb *phb)
OPAL_M64_WINDOW_TYPE, index,
OPAL_ENABLE_M64_SPLIT);
if (rc != OPAL_SUCCESS) {
pr_warn(" Error %lld enabling M64 PHB#%d-BAR#%d\n",
pr_warn(" Error %lld enabling M64 PHB#%x-BAR#%d\n",
rc, phb->hose->global_number, index);
goto fail;
}
@ -316,7 +316,7 @@ static int pnv_ioda1_init_m64(struct pnv_phb *phb)
else if (phb->ioda.reserved_pe_idx == (phb->ioda.total_pe_num - 1))
r->end -= (2 * phb->ioda.m64_segsize);
else
WARN(1, "Wrong reserved PE#%d on PHB#%d\n",
WARN(1, "Wrong reserved PE#%x on PHB#%x\n",
phb->ioda.reserved_pe_idx, phb->hose->global_number);
return 0;
@ -414,7 +414,7 @@ static struct pnv_ioda_pe *pnv_ioda_pick_m64_pe(struct pci_bus *bus, bool all)
pe->pe_number / PNV_IODA1_M64_SEGS,
pe->pe_number % PNV_IODA1_M64_SEGS);
if (rc != OPAL_SUCCESS)
pr_warn("%s: Error %lld mapping M64 for PHB#%d-PE#%d\n",
pr_warn("%s: Error %lld mapping M64 for PHB#%x-PE#%x\n",
__func__, rc, phb->hose->global_number,
pe->pe_number);
}
@ -941,14 +941,14 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
pe->mve_number = pe->pe_number;
rc = opal_pci_set_mve(phb->opal_id, pe->mve_number, pe->pe_number);
if (rc != OPAL_SUCCESS) {
pe_err(pe, "OPAL error %ld setting up MVE %d\n",
pe_err(pe, "OPAL error %ld setting up MVE %x\n",
rc, pe->mve_number);
pe->mve_number = -1;
} else {
rc = opal_pci_set_mve_enable(phb->opal_id,
pe->mve_number, OPAL_ENABLE_MVE);
if (rc) {
pe_err(pe, "OPAL error %ld enabling MVE %d\n",
pe_err(pe, "OPAL error %ld enabling MVE %x\n",
rc, pe->mve_number);
pe->mve_number = -1;
}
@ -1159,10 +1159,10 @@ static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
pe->rid = bus->busn_res.start << 8;
if (all)
pe_info(pe, "Secondary bus %d..%d associated with PE#%d\n",
pe_info(pe, "Secondary bus %d..%d associated with PE#%x\n",
bus->busn_res.start, bus->busn_res.end, pe->pe_number);
else
pe_info(pe, "Secondary bus %d associated with PE#%d\n",
pe_info(pe, "Secondary bus %d associated with PE#%x\n",
bus->busn_res.start, pe->pe_number);
if (pnv_ioda_configure_pe(phb, pe)) {
@ -1213,7 +1213,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
* peer NPU.
*/
dev_info(&npu_pdev->dev,
"Associating to existing PE %d\n", pe_num);
"Associating to existing PE %x\n", pe_num);
pci_dev_get(npu_pdev);
npu_pdn = pci_get_pdn(npu_pdev);
rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
@ -1539,7 +1539,7 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
pe->rid = (pci_iov_virtfn_bus(pdev, vf_index) << 8) |
pci_iov_virtfn_devfn(pdev, vf_index);
pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%d\n",
pe_info(pe, "VF %04d:%02d:%02d.%d associated with PE#%x\n",
hose->global_number, pdev->bus->number,
PCI_SLOT(pci_iov_virtfn_devfn(pdev, vf_index)),
PCI_FUNC(pci_iov_virtfn_devfn(pdev, vf_index)), pe_num);
@ -2844,7 +2844,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
pnv_set_msi_irq_chip(phb, virq);
pr_devel("%s: %s-bit MSI on hwirq %x (xive #%d),"
" address=%x_%08x data=%x PE# %d\n",
" address=%x_%08x data=%x PE# %x\n",
pci_name(dev), is_64 ? "64" : "32", hwirq, xive_num,
msg->address_hi, msg->address_lo, data, pe->pe_number);
@ -2993,7 +2993,7 @@ static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe,
rc = opal_pci_map_pe_mmio_window(phb->opal_id,
pe->pe_number, OPAL_IO_WINDOW_TYPE, 0, index);
if (rc != OPAL_SUCCESS) {
pr_err("%s: Error %lld mapping IO segment#%d to PE#%d\n",
pr_err("%s: Error %lld mapping IO segment#%d to PE#%x\n",
__func__, rc, index, pe->pe_number);
break;
}
@ -3017,7 +3017,7 @@ static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe,
rc = opal_pci_map_pe_mmio_window(phb->opal_id,
pe->pe_number, OPAL_M32_WINDOW_TYPE, 0, index);
if (rc != OPAL_SUCCESS) {
pr_err("%s: Error %lld mapping M32 segment#%d to PE#%d",
pr_err("%s: Error %lld mapping M32 segment#%d to PE#%x",
__func__, rc, index, pe->pe_number);
break;
}
@ -3281,7 +3281,7 @@ static void pnv_pci_setup_bridge(struct pci_bus *bus, unsigned long type)
pnv_pci_ioda2_setup_dma_pe(phb, pe);
break;
default:
pr_warn("%s: No DMA for PHB#%d (type %d)\n",
pr_warn("%s: No DMA for PHB#%x (type %d)\n",
__func__, phb->hose->global_number, phb->type);
}
}

View File

@ -234,7 +234,7 @@ static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose,
int i;
data = (struct OpalIoP7IOCPhbErrorData *)common;
pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n",
pr_info("P7IOC PHB#%x Diag-data (Version: %d)\n",
hose->global_number, be32_to_cpu(common->version));
if (data->brdgCtl)
@ -326,7 +326,7 @@ static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose,
int i;
data = (struct OpalIoPhb3ErrorData*)common;
pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n",
pr_info("PHB3 PHB#%x Diag-data (Version: %d)\n",
hose->global_number, be32_to_cpu(common->version));
if (data->brdgCtl)
pr_info("brdgCtl: %08x\n",
@ -516,7 +516,7 @@ static void pnv_pci_config_check_eeh(struct pci_dn *pdn)
}
}
pr_devel(" -> EEH check, bdfn=%04x PE#%d fstate=%x\n",
pr_devel(" -> EEH check, bdfn=%04x PE#%x fstate=%x\n",
(pdn->busno << 8) | (pdn->devfn), pe_no, fstate);
/* Clear the frozen state if applicable */

View File

@ -270,7 +270,7 @@ static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
eeh_add_flag(EEH_ENABLED);
eeh_add_to_parent_pe(edev);
pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%d-PE#%x\n",
pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%x-PE#%x\n",
__func__, pdn->busno, PCI_SLOT(pdn->devfn),
PCI_FUNC(pdn->devfn), pe.phb->global_number,
pe.addr);
@ -371,7 +371,7 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
pe->config_addr, BUID_HI(pe->phb->buid),
BUID_LO(pe->phb->buid), 0);
if (ret) {
pr_warn("%s: Failed to get address for PHB#%d-PE#%x\n",
pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
__func__, pe->phb->global_number, pe->config_addr);
return 0;
}
@ -384,7 +384,7 @@ static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
pe->config_addr, BUID_HI(pe->phb->buid),
BUID_LO(pe->phb->buid), 0);
if (ret) {
pr_warn("%s: Failed to get address for PHB#%d-PE#%x\n",
pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
__func__, pe->phb->global_number, pe->config_addr);
return 0;
}
@ -653,7 +653,7 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
rtas_busy_delay(ret);
}
pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
pr_warn("%s: Unable to configure bridge PHB#%x-PE#%x (%d)\n",
__func__, pe->phb->global_number, pe->addr, ret);
return ret;
}